if (*string == 'h' || *string == 'H')
{
+ string++;
+ if (*string == 'n' || *string == 'N')
+ return (info->mach == bfd_mach_h8300hn);
+
return (info->mach == bfd_mach_h8300h);
}
else if (*string == 's' || *string == 'S')
{
+ string++;
+ if (*string == 'n' || *string == 'N')
+ return (info->mach == bfd_mach_h8300sn);
+
return (info->mach == bfd_mach_h8300s);
}
else
- {
- return info->mach == bfd_mach_h8300;
- }
+ return info->mach == bfd_mach_h8300;
}
/* This routine is provided two arch_infos and works out the machine
return in;
}
+static const bfd_arch_info_type h8300sn_info_struct =
+{
+ 32, /* 32 bits in a word. */
+ 32, /* 32 bits in an address. */
+ 8, /* 8 bits in a byte. */
+ bfd_arch_h8300,
+ bfd_mach_h8300sn,
+ "h8300sn", /* Architecture name. */
+ "h8300sn", /* Printable name. */
+ 1,
+ FALSE, /* The default machine. */
+ compatible,
+ h8300_scan,
+ 0
+};
+
+
+static const bfd_arch_info_type h8300hn_info_struct =
+{
+ 32, /* 32 bits in a word. */
+ 32, /* 32 bits in an address. */
+ 8, /* 8 bits in a byte. */
+ bfd_arch_h8300,
+ bfd_mach_h8300hn,
+ "h8300hn", /* Architecture name. */
+ "h8300hn", /* Printable name. */
+ 1,
+ FALSE, /* The default machine. */
+ compatible,
+ h8300_scan,
+ &h8300sn_info_struct
+};
+
static const bfd_arch_info_type h8300s_info_struct =
{
- 32, /* 32 bits in a word */
- 32, /* 32 bits in an address */
- 8, /* 8 bits in a byte */
+ 32, /* 32 bits in a word. */
+ 32, /* 32 bits in an address. */
+ 8, /* 8 bits in a byte. */
bfd_arch_h8300,
bfd_mach_h8300s,
- "h8300s", /* arch_name */
- "h8300s", /* printable name */
+ "h8300s", /* Architecture name. */
+ "h8300s", /* Printable name. */
1,
- FALSE, /* the default machine */
+ FALSE, /* The default machine. */
compatible,
h8300_scan,
- 0
+ & h8300hn_info_struct
};
static const bfd_arch_info_type h8300h_info_struct =
{
- 32, /* 32 bits in a word */
- 32, /* 32 bits in an address */
- 8, /* 8 bits in a byte */
+ 32, /* 32 bits in a word. */
+ 32, /* 32 bits in an address. */
+ 8, /* 8 bits in a byte. */
bfd_arch_h8300,
bfd_mach_h8300h,
- "h8300h", /* arch_name */
- "h8300h", /* printable name */
+ "h8300h", /* Architecture name. */
+ "h8300h", /* Printable name. */
1,
- FALSE, /* the default machine */
+ FALSE, /* The default machine. */
compatible,
h8300_scan,
&h8300s_info_struct
const bfd_arch_info_type bfd_h8300_arch =
{
- 16, /* 16 bits in a word */
- 16, /* 16 bits in an address */
- 8, /* 8 bits in a byte */
+ 16, /* 16 bits in a word. */
+ 16, /* 16 bits in an address. */
+ 8, /* 8 bits in a byte. */
bfd_arch_h8300,
bfd_mach_h8300,
- "h8300", /* arch_name */
- "h8300", /* printable name */
+ "h8300", /* Architecture name. */
+ "h8300", /* Printable name. */
1,
- TRUE, /* the default machine */
+ TRUE, /* The default machine. */
compatible,
h8300_scan,
&h8300h_info_struct
-# Configure fragment invoked in the post-target section for subdirs
-# wanting multilib support.
-#
-# It is advisable to support a few --enable/--disable options to let the
-# user select which libraries s/he really wants.
-#
-# Subdirectories wishing to use multilib should put the following lines
-# in the "post-target" section of configure.in.
-#
-# if [ "${srcdir}" = "." ] ; then
-# if [ "${with_target_subdir}" != "." ] ; then
-# . ${with_multisrctop}../../config-ml.in
-# else
-# . ${with_multisrctop}../config-ml.in
-# fi
-# else
-# . ${srcdir}/../config-ml.in
-# fi
-#
-# See librx/configure.in in the libg++ distribution for an example of how
-# to handle autoconf'd libraries.
-#
-# Things are complicated because 6 separate cases must be handled:
-# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
-#
-# srcdir=. is special. It must handle make programs that don't handle VPATH.
-# To implement this, a symlink tree is built for each library and for each
-# multilib subdir.
-#
-# The build tree is layed out as
-#
-# ./
-# libg++
-# newlib
-# m68020/
-# libg++
-# newlib
-# m68881/
-# libg++
-# newlib
-#
-# The nice feature about this arrangement is that inter-library references
-# in the build tree work without having to care where you are. Note that
-# inter-library references also work in the source tree because symlink trees
-# are built when srcdir=.
-#
-# Unfortunately, trying to access the libraries in the build tree requires
-# the user to manually choose which library to use as GCC won't be able to
-# find the right one. This is viewed as the lesser of two evils.
-#
-# Configure variables:
-# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
-# Set by top level Makefile.
-# ${with_multisrctop} = how many levels of multilibs there are in the source
-# tree. It exists to handle the case of configuring in the source tree:
-# ${srcdir} is not constant.
-# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
-#
-# Makefile variables:
-# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
-# (FIXME: note that this is different than ${with_multisrctop}. Check out.).
-# MULTIBUILDTOP = number of multilib levels in build tree
-# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
-# (only defined in each library's main Makefile).
-# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
-# (only defined in each multilib subdir).
-
-# FIXME: Multilib is currently disabled by default for everything other than
-# newlib. It is up to each target to turn on multilib support for the other
-# libraries as desired.
-
-# We have to handle being invoked by both Cygnus configure and Autoconf.
-#
-# Cygnus configure incoming variables:
-# srcdir, subdir, host, arguments
-#
-# Autoconf incoming variables:
-# srcdir, host, ac_configure_args
-#
-# We *could* figure srcdir and host out, but we'd have to do work that
-# our caller has already done to figure them out and requiring these two
-# seems reasonable.
-# Note that `host' in this case is GCC's `target'. Target libraries are
-# configured for a particular host.
-
-if [ -n "${ac_configure_args}" ]; then
- Makefile=${ac_file-Makefile}
- ml_config_shell=${CONFIG_SHELL-/bin/sh}
- ml_arguments="${ac_configure_args}"
- ml_realsrcdir=${srcdir}
-else
- Makefile=${Makefile-Makefile}
- ml_config_shell=${config_shell-/bin/sh}
- ml_arguments="${arguments}"
- if [ -n "${subdir}" -a "${subdir}" != "." ] ; then
- ml_realsrcdir=${srcdir}/${subdir}
- else
- ml_realsrcdir=${srcdir}
- fi
-fi
-
-# Scan all the arguments and set all the ones we need.
-
-ml_verbose=--verbose
-for option in ${ml_arguments}
-do
- case $option in
- --*) ;;
- -*) option=-$option ;;
- esac
-
- case $option in
- --*=*)
- optarg=`echo $option | sed -e 's/^[^=]*=//'`
- ;;
- esac
-
- case $option in
- --disable-*)
- enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
- eval $enableopt=no
- ;;
- --enable-*)
- case "$option" in
- *=*) ;;
- *) optarg=yes ;;
- esac
- enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $enableopt="$optarg"
- ;;
- --norecursion | --no*)
- ml_norecursion=yes
- ;;
- --silent | --sil* | --quiet | --q*)
- ml_verbose=--silent
- ;;
- --verbose | --v | --verb*)
- ml_verbose=--verbose
- ;;
- --with-*)
- case "$option" in
- *=*) ;;
- *) optarg=yes ;;
- esac
- withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $withopt="$optarg"
- ;;
- --without-*)
- withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
- eval $withopt=no
- ;;
- esac
-done
-
-# Only do this if --enable-multilib.
-if [ "${enable_multilib}" = yes ]; then
-
-# Compute whether this is the library's top level directory
-# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
-# ${with_multisubdir} tells us we're in the right branch, but we could be
-# in a subdir of that.
-# ??? The previous version could void this test by separating the process into
-# two files: one that only the library's toplevel configure.in ran (to
-# configure the multilib subdirs), and another that all configure.in's ran to
-# update the Makefile. It seemed reasonable to collapse all multilib support
-# into one file, but it does leave us with having to perform this test.
-ml_toplevel_p=no
-if [ -z "${with_multisubdir}" ]; then
- if [ "${srcdir}" = "." ]; then
- # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
- # ${with_target_subdir} = "." for native, otherwise target alias.
- if [ "${with_target_subdir}" = "." ]; then
- if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
- ml_toplevel_p=yes
- fi
- else
- if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
- ml_toplevel_p=yes
- fi
- fi
- else
- # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
- if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
- ml_toplevel_p=yes
- fi
- fi
-fi
-
-# If this is the library's top level directory, set multidirs to the
-# multilib subdirs to support. This lives at the top because we need
-# `multidirs' set right away.
-
-if [ "${ml_toplevel_p}" = yes ]; then
-
-multidirs=
-for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
- dir=`echo $i | sed -e 's/;.*$//'`
- if [ "${dir}" = "." ]; then
- true
- else
- if [ -z "${multidirs}" ]; then
- multidirs="${dir}"
- else
- multidirs="${multidirs} ${dir}"
- fi
- fi
-done
-
-# Target libraries are configured for the host they run on, so we check
-# $host here, not $target.
-
-case "${host}" in
-arc-*-elf*)
- if [ x$enable_biendian != xyes ]
- then
- old_multidirs=${multidirs}
- multidirs=""
- for x in ${old_multidirs}; do
- case "${x}" in
- *be*) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- ;;
-arm-*-*)
- if [ x"$enable_fpu" = xno ]
- then
- old_multidirs=${multidirs}
- multidirs=""
- for x in ${old_multidirs}; do
- case "${x}" in
- *fpu*) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x"$enable_26bit" = xno ]
- then
- old_multidirs=${multidirs}
- multidirs=""
- for x in ${old_multidirs}; do
- case "${x}" in
- *26bit*) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x"$enable_underscore" = xno ]
- then
- old_multidirs=${multidirs}
- multidirs=""
- for x in ${old_multidirs}; do
- case "${x}" in
- *under*) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x"$enable_interwork" = xno ]
- then
- old_multidirs=${multidirs}
- multidirs=""
- for x in ${old_multidirs}; do
- case "${x}" in
- *interwork*) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_biendian = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *le* ) : ;;
- *be* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x"$enable_nofmult" = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *nofmult* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- ;;
-m68*-*-*)
- if [ x$enable_softfloat = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *soft-float* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_m68881 = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *m68881* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_m68000 = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *m68000* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_m68020 = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *m68020* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- ;;
-mips*-*-*)
- if [ x$enable_single_float = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *single* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_biendian = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *el* ) : ;;
- *eb* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_softfloat = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *soft-float* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- case " $multidirs " in
- *" mabi=64 "*)
- # We will not be able to create libraries with -mabi=64 if
- # we cannot even link a trivial program. It usually
- # indicates the 64bit libraries are missing.
- if echo 'main() {}' > conftest.c &&
- ${CC-gcc} -mabi=64 conftest.c -o conftest; then
- :
- else
- echo Could not link program with -mabi=64, disabling it.
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *mabi=64* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- rm -f conftest.c conftest
- ;;
- esac
- ;;
-powerpc*-*-* | rs6000*-*-*)
- if [ x$enable_softfloat = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *soft-float* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_powercpu = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- power | */power | */power/* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_powerpccpu = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *powerpc* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_powerpcos = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *mcall-linux* | *mcall-solaris* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_biendian = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *mlittle* | *mbig* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_sysv = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *mcall-sysv* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- if [ x$enable_aix = xno ]
- then
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *mcall-aix* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- ;;
-sparc*-*-*)
- case " $multidirs " in
- *" m64 "*)
- # We will not be able to create libraries with -m64 if
- # we cannot even link a trivial program. It usually
- # indicates the 64bit libraries are missing.
- if echo 'main() {}' > conftest.c &&
- ${CC-gcc} -m64 conftest.c -o conftest; then
- :
- else
- echo Could not link program with -m64, disabling it.
- old_multidirs="${multidirs}"
- multidirs=""
- for x in ${old_multidirs}; do
- case "$x" in
- *m64* ) : ;;
- *) multidirs="${multidirs} ${x}" ;;
- esac
- done
- fi
- rm -f conftest.c conftest
- ;;
- esac
- ;;
-esac
-
-# Remove extraneous blanks from multidirs.
-# Tests like `if [ -n "$multidirs" ]' require it.
-multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
-
-# Add code to library's top level makefile to handle building the multilib
-# subdirs.
-
-cat > Multi.tem <<\EOF
-
-PWD=$${PWDCMD-pwd}
-
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
-multi-do:
- if [ -z "$(MULTIDIRS)" ]; then \
- true; \
- else \
- rootpre=`${PWD}`/; export rootpre; \
- srcrootpre=`cd $(srcdir); ${PWD}`/; export srcrootpre; \
- lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
- compiler="$(CC)"; \
- for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
- dir=`echo $$i | sed -e 's/;.*$$//'`; \
- if [ "$${dir}" = "." ]; then \
- true; \
- else \
- if [ -d ../$${dir}/$${lib} ]; then \
- flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
- if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
- CFLAGS="$(CFLAGS) $${flags}" \
- prefix="$(prefix)" \
- exec_prefix="$(exec_prefix)" \
- CXXFLAGS="$(CXXFLAGS) $${flags}" \
- LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
- LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
- LDFLAGS="$(LDFLAGS) $${flags}" \
- DESTDIR="$(DESTDIR)" \
- $(DO)); then \
- true; \
- else \
- exit 1; \
- fi; \
- else true; \
- fi; \
- fi; \
- done; \
- fi
-
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
-multi-clean:
- if [ -z "$(MULTIDIRS)" ]; then \
- true; \
- else \
- lib=`${PWD} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
- for dir in Makefile $(MULTIDIRS); do \
- if [ -f ../$${dir}/$${lib}/Makefile ]; then \
- if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
- then true; \
- else exit 1; \
- fi; \
- else true; \
- fi; \
- done; \
- fi
-EOF
-
-cat ${Makefile} Multi.tem > Makefile.tem
-rm -f ${Makefile} Multi.tem
-mv Makefile.tem ${Makefile}
-
-fi # ${ml_toplevel_p} = yes
-
-if [ "${ml_verbose}" = --verbose ]; then
- echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
- if [ "${ml_toplevel_p}" = yes ]; then
- echo "multidirs=${multidirs}"
- fi
- echo "with_multisubdir=${with_multisubdir}"
-fi
-
-if [ "${srcdir}" = "." ]; then
- if [ "${with_target_subdir}" != "." ]; then
- ml_srcdotdot="../"
- else
- ml_srcdotdot=""
- fi
-else
- ml_srcdotdot=""
-fi
-
-if [ -z "${with_multisubdir}" ]; then
- ml_subdir=
- ml_builddotdot=
- : # ml_srcdotdot= # already set
-else
- ml_subdir="/${with_multisubdir}"
- # The '[^/][^/]*' appears that way to work around a SunOS sed bug.
- ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
- if [ "$srcdir" = "." ]; then
- ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
- else
- : # ml_srcdotdot= # already set
- fi
-fi
-
-if [ "${ml_toplevel_p}" = yes ]; then
- ml_do='$(MAKE)'
- ml_clean='$(MAKE)'
-else
- ml_do=true
- ml_clean=true
-fi
-
-# TOP is used by newlib and should not be used elsewhere for this purpose.
-# MULTI{SRC,BUILD}TOP are the proper ones to use. MULTISRCTOP is empty
-# when srcdir != builddir. MULTIBUILDTOP is always some number of ../'s.
-# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
-# delete TOP. Newlib may wish to continue to use TOP for its own purposes
-# of course.
-# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
-# and lists the subdirectories to recurse into.
-# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
-# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
-# a leading '/'.
-# MULTIDO is used for targets like all, install, and check where
-# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
-# MULTICLEAN is used for the *clean targets.
-#
-# ??? It is possible to merge MULTIDO and MULTICLEAN into one. They are
-# currently kept separate because we don't want the *clean targets to require
-# the existence of the compiler (which MULTIDO currently requires) and
-# therefore we'd have to record the directory options as well as names
-# (currently we just record the names and use --print-multi-lib to get the
-# options).
-
-sed -e "s:^TOP[ ]*=[ ]*\([./]*\)[ ]*$:TOP = ${ml_builddotdot}\1:" \
- -e "s:^MULTISRCTOP[ ]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
- -e "s:^MULTIBUILDTOP[ ]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
- -e "s:^MULTIDIRS[ ]*=.*$:MULTIDIRS = ${multidirs}:" \
- -e "s:^MULTISUBDIR[ ]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
- -e "s:^MULTIDO[ ]*=.*$:MULTIDO = $ml_do:" \
- -e "s:^MULTICLEAN[ ]*=.*$:MULTICLEAN = $ml_clean:" \
- ${Makefile} > Makefile.tem
-rm -f ${Makefile}
-mv Makefile.tem ${Makefile}
-
-# If this is the library's top level, configure each multilib subdir.
-# This is done at the end because this is the loop that runs configure
-# in each multilib subdir and it seemed reasonable to finish updating the
-# Makefile before going on to configure the subdirs.
-
-if [ "${ml_toplevel_p}" = yes ]; then
-
-# We must freshly configure each subdirectory. This bit of code is
-# actually partially stolen from the main configure script. FIXME.
-
-if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
-
- if [ "${ml_verbose}" = --verbose ]; then
- echo "Running configure in multilib subdirs ${multidirs}"
- echo "pwd: `${PWDCMD-pwd}`"
- fi
-
- ml_origdir=`${PWDCMD-pwd}`
- ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
- # cd to top-level-build-dir/${with_target_subdir}
- cd ..
-
- for ml_dir in ${multidirs}; do
-
- if [ "${ml_verbose}" = --verbose ]; then
- echo "Running configure in multilib subdir ${ml_dir}"
- echo "pwd: `${PWDCMD-pwd}`"
- fi
-
- if [ -d ${ml_dir} ]; then true; else
- # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
- pathcomp=""
- for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp" 1>&2
- mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
- fi
- if test ! -d "$pathcomp"; then
- exit $lasterr
- fi
- pathcomp="$pathcomp/"
- done
- fi
- if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
-
- # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
- dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
-
- case ${srcdir} in
- ".")
- echo Building symlink tree in `${PWDCMD-pwd}`/${ml_dir}/${ml_libdir}
- if [ "${with_target_subdir}" != "." ]; then
- ml_unsubdir="../"
- else
- ml_unsubdir=""
- fi
- (cd ${ml_dir}/${ml_libdir};
- ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
- if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
- if [ x"${MAKE}" = x ]; then
- (cd ${ml_dir}/${ml_libdir}; make distclean)
- else
- (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
- fi
- fi
- ml_newsrcdir="."
- ml_srcdiroption=
- multisrctop=${dotdot}
- ;;
- *)
- case "${srcdir}" in
- /*) # absolute path
- ml_newsrcdir=${srcdir}
- ;;
- *) # otherwise relative
- ml_newsrcdir=${dotdot}${srcdir}
- ;;
- esac
- ml_srcdiroption="-srcdir=${ml_newsrcdir}"
- multisrctop=
- ;;
- esac
-
- case "${progname}" in
- /*) ml_recprog=${progname} ;;
- *) ml_recprog=${dotdot}${progname} ;;
- esac
-
- # FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
- ML_POPDIR=`pwd`
- cd ${ml_dir}/${ml_libdir}
-
- if [ -f ${ml_newsrcdir}/configure ]; then
- ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
- fi
-
- # find compiler flag corresponding to ${ml_dir}
- for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
- dir=`echo $i | sed -e 's/;.*$//'`
- if [ "${dir}" = "${ml_dir}" ]; then
- flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
- break
- fi
- done
- ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags"'
-
- if [ "${with_target_subdir}" = "." ]; then
- CC_=$CC' '
- CXX_=$CXX' '
- else
- # Create a regular expression that matches any string as long
- # as ML_POPDIR.
- popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
- CC_=
- for arg in ${CC}; do
- case $arg in
- -[BIL]"${ML_POPDIR}"/*)
- CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
- "${ML_POPDIR}"/*)
- CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
- *)
- CC_="${CC_}${arg} " ;;
- esac
- done
-
- CXX_=
- for arg in ${CXX}; do
- case $arg in
- -[BIL]"${ML_POPDIR}"/*)
- CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
- "${ML_POPDIR}"/*)
- CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
- *)
- CXX_="${CXX_}${arg} " ;;
- esac
- done
-
- if test "x${LD_LIBRARY_PATH+set}" = xset; then
- LD_LIBRARY_PATH_=
- for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
- case "$arg" in
- "${ML_POPDIR}"/*)
- arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
- ;;
- esac
- if test "x$LD_LIBRARY_PATH_" != x; then
- LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
- else
- LD_LIBRARY_PATH_=$arg
- fi
- done
- ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
- fi
-
- if test "x${SHLIB_PATH+set}" = xset; then
- SHLIB_PATH_=
- for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
- case "$arg" in
- "${ML_POPDIR}"/*)
- arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
- ;;
- esac
- if test "x$SHLIB_PATH_" != x; then
- SHLIB_PATH_=$SHLIB_PATH_:$arg
- else
- SHLIB_PATH_=$arg
- fi
- done
- ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
- fi
- fi
-
- if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
- --with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
- ${ml_arguments} ${ml_srcdiroption} ; then
- true
- else
- exit 1
- fi
-
- cd ${ML_POPDIR}
-
- done
-
- cd ${ml_origdir}
-fi
-
-fi # ${ml_toplevel_p} = yes
-fi # ${enable_multilib} = yes
projects / deliverable / binutils-gdb.git / commitdiff
