ath9k_htc: add STBC TX support
authorOleksij Rempel <linux@rempel-privat.de>
Sun, 9 Jun 2013 16:51:24 +0000 (18:51 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 12 Jun 2013 19:06:53 +0000 (15:06 -0400)
All known ar7010+ar* device and current FW support STBC TX. This patch
make use of it and suggest to send STBC if peer support it.
I use wort "suggest" since currenly we have separate rate controller
in FW which will make decision based on rate and hardware.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/htc.h
drivers/net/wireless/ath/ath9k/htc_drv_init.c
drivers/net/wireless/ath/ath9k/htc_drv_main.c

index 0085e643132f4e794a62e57896cc032ca64a67ef..69581031f2cdfe159f26199c4189bfa4ee0f6546 100644 (file)
@@ -142,6 +142,7 @@ struct ath9k_htc_target_aggr {
 #define WLAN_RC_40_FLAG  0x02
 #define WLAN_RC_SGI_FLAG 0x04
 #define WLAN_RC_HT_FLAG  0x08
+#define ATH_RC_TX_STBC_FLAG 0x20
 
 struct ath9k_htc_rateset {
        u8 rs_nrates;
index 59f64367e8cac19f43bcbdc497b7a0c3b0d81bd9..bb0ba9e3e083730c2be54b44c6bbcf3a420285f3 100644 (file)
@@ -517,6 +517,9 @@ static void setup_ht_cap(struct ath9k_htc_priv *priv,
        ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
                tx_streams, rx_streams);
 
+       if (tx_streams >= 2)
+               ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+
        if (tx_streams != rx_streams) {
                ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
                ht_info->mcs.tx_params |= ((tx_streams - 1) <<
index 34869c2405aa509052bc7182c662be14c28c6695..eaa94feb4333b2d89f1cd224b930c6b1b93548ca 100644 (file)
@@ -627,6 +627,8 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv,
                trate->rates.ht_rates.rs_nrates = j;
 
                caps = WLAN_RC_HT_FLAG;
+               if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
+                       caps |= ATH_RC_TX_STBC_FLAG;
                if (sta->ht_cap.mcs.rx_mask[1])
                        caps |= WLAN_RC_DS_FLAG;
                if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
This page took 0.028164 seconds and 5 git commands to generate.