+2017-11-28 Nick Clifton <nickc@redhat.com>
+
+ PR 22506
+ * reloc.c (reloc_offset_in_range): Rename to
+ bfd_reloc_offset_in_range and export.
+ (bfd_perform_relocation): Rename function invocation.
+ (bfd_install_relocation): Likewise.
+ (bfd_final_link_relocate): Likewise.
+ * bfd-in2.h: Regenerate.
+ * coff-arm.c (coff_arm_reloc): Use bfd_reloc_offset_in_range.
+ * coff-i386.c (coff_i386_reloc): Likewise.
+ * coff-i860.c (coff_i860_reloc): Likewise.
+ * coff-m68k.c (mk68kcoff_common_addend_special_fn): Likewise.
+ * coff-m88k.c (m88k_special_reloc): Likewise.
+ * coff-mips.c (mips_reflo_reloc): Likewise.
+ * coff-x86_64.c (coff_amd64_reloc): Likewise.
+
2017-11-28 H.J. Lu <hongjiu.lu@intel.com>
* elf-m10300.c (mn10300_elf_check_relocs): Don't set
unsigned int addrsize,
bfd_vma relocation);
+bfd_boolean bfd_reloc_offset_in_range
+ (reloc_howto_type *howto,
+ bfd *abfd,
+ asection *section,
+ bfd_size_type offset);
+
bfd_reloc_status_type bfd_perform_relocation
(bfd *abfd,
arelent *reloc_entry,
x = ((x & ~howto->dst_mask) \
| (((x & howto->src_mask) + diff) & howto->dst_mask))
- if (diff != 0)
- {
- reloc_howto_type *howto = reloc_entry->howto;
- unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+ if (diff != 0)
+ {
+ reloc_howto_type *howto = reloc_entry->howto;
+ unsigned char *addr = (unsigned char *) data + reloc_entry->address;
- switch (howto->size)
- {
- case 0:
- {
- char x = bfd_get_8 (abfd, addr);
- DOIT (x);
- bfd_put_8 (abfd, x, addr);
- }
- break;
+ if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
- case 1:
- {
- short x = bfd_get_16 (abfd, addr);
- DOIT (x);
- bfd_put_16 (abfd, (bfd_vma) x, addr);
- }
- break;
+ switch (howto->size)
+ {
+ case 0:
+ {
+ char x = bfd_get_8 (abfd, addr);
+ DOIT (x);
+ bfd_put_8 (abfd, x, addr);
+ }
+ break;
- case 2:
- {
- long x = bfd_get_32 (abfd, addr);
- DOIT (x);
- bfd_put_32 (abfd, (bfd_vma) x, addr);
- }
- break;
+ case 1:
+ {
+ short x = bfd_get_16 (abfd, addr);
+ DOIT (x);
+ bfd_put_16 (abfd, (bfd_vma) x, addr);
+ }
+ break;
- default:
- abort ();
+ case 2:
+ {
+ long x = bfd_get_32 (abfd, addr);
+ DOIT (x);
+ bfd_put_32 (abfd, (bfd_vma) x, addr);
}
- }
+ break;
+
+ default:
+ abort ();
+ }
+ }
/* Now let bfd_perform_relocation finish everything up. */
return bfd_reloc_continue;
reloc_howto_type *howto = reloc_entry->howto;
unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+ if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
+
switch (howto->size)
{
case 0:
reloc_howto_type *howto = reloc_entry->howto;
unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+ if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
+
switch (howto->size)
{
case 0:
reloc_howto_type *howto = reloc_entry->howto;
unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+ if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
+
switch (howto->size)
{
case 0:
{
bfd_vma output_base = 0;
bfd_vma addr = reloc_entry->address;
- bfd_vma x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
+ bfd_vma x;
asection *reloc_target_output_section;
long relocation = 0;
+ if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
+
+ x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
+
/* Work out which section the relocation is targeted at and the
initial relocation command value. */
unsigned long vallo;
struct mips_hi *next;
+ if (! bfd_reloc_offset_in_range (reloc_entry->howto, abfd,
+ input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
+
/* Do the REFHI relocation. Note that we actually don't
need to know anything about the REFLO itself, except
where to find the low 16 bits of the addend needed by the
{
reloc_howto_type *howto = reloc_entry->howto;
unsigned char *addr = (unsigned char *) data + reloc_entry->address;
-
- /* FIXME: We do not have an end address for data, so we cannot
- accurately range check any addresses computed against it.
- cf: PR binutils/17512: file: 1085-1761-0.004.
- For now we do the best that we can. */
- if (addr < (unsigned char *) data
- || addr > ((unsigned char *) data) + input_section->size)
- {
- bfd_set_error (bfd_error_bad_value);
- return bfd_reloc_notsupported;
- }
+
+ if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
+ reloc_entry->address
+ * bfd_octets_per_byte (abfd)))
+ return bfd_reloc_outofrange;
switch (howto->size)
{
return flag;
}
+/*
+FUNCTION
+ bfd_reloc_offset_in_range
+
+SYNOPSIS
+ bfd_boolean bfd_reloc_offset_in_range
+ (reloc_howto_type *howto,
+ bfd *abfd,
+ asection *section,
+ bfd_size_type offset);
+
+DESCRIPTION
+ Returns TRUE if the reloc described by @var{HOWTO} can be
+ applied at @var{OFFSET} octets in @var{SECTION}.
+
+*/
+
/* HOWTO describes a relocation, at offset OCTET. Return whether the
relocation field is within SECTION of ABFD. */
-static bfd_boolean
-reloc_offset_in_range (reloc_howto_type *howto, bfd *abfd,
- asection *section, bfd_size_type octet)
+bfd_boolean
+bfd_reloc_offset_in_range (reloc_howto_type *howto,
+ bfd *abfd,
+ asection *section,
+ bfd_size_type octet)
{
bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section);
bfd_size_type reloc_size = bfd_get_reloc_size (howto);
if (howto && howto->special_function)
{
bfd_reloc_status_type cont;
+
+ /* Note - we do not call bfd_reloc_offset_in_range here as the
+ reloc_entry->address field might actually be valid for the
+ backend concerned. It is up to the special_function itself
+ to call bfd_reloc_offset_in_range if needed. */
cont = howto->special_function (abfd, reloc_entry, symbol, data,
input_section, output_bfd,
error_message);
/* Is the address of the relocation really within the section? */
octets = reloc_entry->address * bfd_octets_per_byte (abfd);
- if (!reloc_offset_in_range (howto, abfd, input_section, octets))
+ if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
/* Work out which section the relocation is targeted at and the
{
bfd_reloc_status_type cont;
+ /* Note - we do not call bfd_reloc_offset_in_range here as the
+ reloc_entry->address field might actually be valid for the
+ backend concerned. It is up to the special_function itself
+ to call bfd_reloc_offset_in_range if needed. */
/* XXX - The special_function calls haven't been fixed up to deal
with creating new relocations and section contents. */
cont = howto->special_function (abfd, reloc_entry, symbol,
/* Is the address of the relocation really within the section? */
octets = reloc_entry->address * bfd_octets_per_byte (abfd);
- if (!reloc_offset_in_range (howto, abfd, input_section, octets))
+ if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
/* Work out which section the relocation is targeted at and the
bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
/* Sanity check the address. */
- if (!reloc_offset_in_range (howto, input_bfd, input_section, octets))
+ if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
return bfd_reloc_outofrange;
/* This function assumes that we are dealing with a basic relocation
projects / deliverable / binutils-gdb.git / commitdiff
