static void print_statement_list
PARAMS ((lang_statement_union_type *, lang_output_section_statement_type *));
static void print_statements PARAMS ((void));
-static bfd_vma insert_pad
+static void insert_pad
PARAMS ((lang_statement_union_type **, fill_type,
unsigned int, asection *, bfd_vma));
static bfd_vma size_input_section
PARAMS ((lang_statement_union_type **, lang_output_section_statement_type *,
- fill_type, bfd_vma, boolean));
+ fill_type, bfd_vma));
static void lang_finish PARAMS ((void));
static void ignore_bfd_errors PARAMS ((const char *, ...));
static void lang_check PARAMS ((void));
config.map_file = map_save;
}
-static bfd_vma
-insert_pad (this_ptr, fill, power, output_section_statement, dot)
- lang_statement_union_type **this_ptr;
+static void
+insert_pad (ptr, fill, alignment_needed, output_section, dot)
+ lang_statement_union_type **ptr;
fill_type fill;
- unsigned int power;
- asection *output_section_statement;
+ unsigned int alignment_needed;
+ asection *output_section;
bfd_vma dot;
{
- /* Align this section first to the
- input sections requirement, then
- to the output section's requirement.
- If this alignment is > than any seen before,
- then record it too. Perform the alignment by
- inserting a magic 'padding' statement. */
-
- unsigned opb = bfd_arch_mach_octets_per_byte (ldfile_output_architecture,
- ldfile_output_machine);
- unsigned int alignment_needed = align_power (dot, power) - dot;
-
- if (alignment_needed != 0)
+ lang_statement_union_type *pad;
+ size_t ptr_off;
+
+ /* ptr_off is zero, but let's not be too fast and loose with
+ pointers. */
+ ptr_off = ((char *) &((lang_statement_union_type *) 0)->header.next
+ - (char *) 0);
+ if (ptr != &statement_list.head
+ && ((pad = (lang_statement_union_type *) ((char *) ptr - ptr_off))
+ ->header.type == lang_padding_statement_enum)
+ && pad->padding_statement.output_section == output_section)
{
- lang_statement_union_type *new =
- ((lang_statement_union_type *)
- stat_alloc (sizeof (lang_padding_statement_type)));
-
- /* Link into existing chain. */
- new->header.next = *this_ptr;
- *this_ptr = new;
- new->header.type = lang_padding_statement_enum;
- new->padding_statement.output_section = output_section_statement;
- new->padding_statement.output_offset =
- dot - output_section_statement->vma;
- new->padding_statement.fill = fill;
- new->padding_statement.size = alignment_needed * opb;
+ /* Use the existing pad statement. The above test on output
+ section is probably redundant, but it doesn't hurt to check. */
}
-
- /* Remember the most restrictive alignment. */
- if (power > output_section_statement->alignment_power)
+ else
{
- output_section_statement->alignment_power = power;
+ /* Make a new padding statement, linked into existing chain. */
+ pad = ((lang_statement_union_type *)
+ stat_alloc (sizeof (lang_padding_statement_type)));
+ pad->header.next = *ptr;
+ *ptr = pad;
+ pad->header.type = lang_padding_statement_enum;
+ pad->padding_statement.output_section = output_section;
+ pad->padding_statement.fill = fill;
}
- output_section_statement->_raw_size += alignment_needed * opb;
-
- return dot + alignment_needed;
+ pad->padding_statement.output_offset = dot - output_section->vma;
+ pad->padding_statement.size = alignment_needed;
+ output_section->_raw_size += alignment_needed;
}
/* Work out how much this section will move the dot point. */
static bfd_vma
-size_input_section (this_ptr, output_section_statement, fill, dot, relax)
+size_input_section (this_ptr, output_section_statement, fill, dot)
lang_statement_union_type **this_ptr;
lang_output_section_statement_type *output_section_statement;
fill_type fill;
bfd_vma dot;
- boolean relax ATTRIBUTE_UNUSED;
{
lang_input_section_type *is = &((*this_ptr)->input_section);
asection *i = is->section;
- unsigned opb = bfd_arch_mach_octets_per_byte (ldfile_output_architecture,
- ldfile_output_machine);
if (is->ifile->just_syms_flag == false)
{
+ unsigned opb = bfd_arch_mach_octets_per_byte (ldfile_output_architecture,
+ ldfile_output_machine);
+ unsigned int alignment_needed;
+ asection *o;
+
+ /* Align this section first to the input sections requirement,
+ then to the output section's requirement. If this alignment
+ is greater than any seen before, then record it too. Perform
+ the alignment by inserting a magic 'padding' statement. */
+
if (output_section_statement->subsection_alignment != -1)
- i->alignment_power =
- output_section_statement->subsection_alignment;
+ i->alignment_power = output_section_statement->subsection_alignment;
+
+ o = output_section_statement->bfd_section;
+ if (o->alignment_power < i->alignment_power)
+ o->alignment_power = i->alignment_power;
- dot = insert_pad (this_ptr, fill, i->alignment_power,
- output_section_statement->bfd_section, dot);
+ alignment_needed = align_power (dot, i->alignment_power) - dot;
+
+ if (alignment_needed != 0)
+ {
+ insert_pad (this_ptr, fill, alignment_needed * opb, o, dot);
+ dot += alignment_needed;
+ }
/* Remember where in the output section this input section goes. */
- i->output_offset = dot - output_section_statement->bfd_section->vma;
+ i->output_offset = dot - o->vma;
/* Mark how big the output section must be to contain this now. */
if (i->_cooked_size != 0)
dot += i->_cooked_size / opb;
else
dot += i->_raw_size / opb;
- output_section_statement->bfd_section->_raw_size =
- (dot - output_section_statement->bfd_section->vma) * opb;
+ o->_raw_size = (dot - o->vma) * opb;
}
else
{
}
}
-/* This variable indicates whether bfd_relax_section should be called
- again. */
-
-static boolean relax_again;
-
/* Make sure the new address is within the region. We explicitly permit the
current address to be at the exact end of the region when the address is
non-zero, in case the region is at the end of addressable memory and the
lang_statement_union_type **prev;
fill_type fill;
bfd_vma dot;
- boolean relax;
+ boolean *relax;
{
unsigned opb = bfd_arch_mach_octets_per_byte (ldfile_output_architecture,
ldfile_output_machine);
os->bfd_section->output_offset = 0;
}
- (void) lang_size_sections (os->children.head, os,
- &os->children.head,
- os->fill, dot, relax);
+ lang_size_sections (os->children.head, os, &os->children.head,
+ os->fill, dot, relax);
/* Put the section within the requested block size, or
align at the block boundary. */
dot = lang_size_sections (constructor_list.head,
output_section_statement,
&s->wild_statement.children.head,
- fill,
- dot, relax);
+ fill, dot, relax);
break;
case lang_data_statement_enum:
if (! bfd_relax_section (i->owner, i, &link_info, &again))
einfo (_("%P%F: can't relax section: %E\n"));
if (again)
- relax_again = true;
+ *relax = true;
}
- dot = size_input_section (prev,
- output_section_statement,
- output_section_statement->fill,
- dot, relax);
+ dot = size_input_section (prev, output_section_statement,
+ output_section_statement->fill, dot);
}
break;
case lang_input_statement_enum:
if (newdot != dot)
{
- /* The assignment changed dot. Insert a pad. */
if (output_section_statement == abs_output_section)
{
/* If we don't have an output section, then just adjust
the default memory address. */
lang_memory_region_lookup ("*default*")->current = newdot;
}
- else if (!relax)
+ else
{
- lang_statement_union_type *new =
- ((lang_statement_union_type *)
- stat_alloc (sizeof (lang_padding_statement_type)));
-
- /* Link into existing chain. */
- new->header.next = *prev;
- *prev = new;
- new->header.type = lang_padding_statement_enum;
- new->padding_statement.output_section =
- output_section_statement->bfd_section;
- new->padding_statement.output_offset =
- dot - output_section_statement->bfd_section->vma;
- new->padding_statement.fill = fill;
- new->padding_statement.size = (newdot - dot) * opb;
- output_section_statement->bfd_section->_raw_size +=
- new->padding_statement.size;
+ /* Insert a pad after this statement. We can't
+ put the pad before when relaxing, in case the
+ assignment references dot. */
+ insert_pad (&s->header.next, fill, (newdot - dot) * opb,
+ output_section_statement->bfd_section, dot);
+
+ /* Don't neuter the pad below when relaxing. */
+ s = s->header.next;
}
dot = newdot;
break;
case lang_padding_statement_enum:
- /* If we are relaxing, and this is not the first pass, some
- padding statements may have been inserted during previous
- passes. We may have to move the padding statement to a new
- location if dot has a different value at this point in this
- pass than it did at this point in the previous pass. */
- s->padding_statement.output_offset =
- dot - output_section_statement->bfd_section->vma;
+ if (relax)
+ {
+ /* If we are relaxing, and this is not the first pass,
+ we need to allow padding to shrink. If padding is
+ needed on this pass, it will be added back in. */
+ s->padding_statement.size = 0;
+ break;
+ }
+
dot += s->padding_statement.size / opb;
output_section_statement->bfd_section->_raw_size +=
s->padding_statement.size;
reset_memory_regions ()
{
lang_memory_region_type *p = lang_memory_region_list;
+ asection *o;
for (p = lang_memory_region_list;
p != (lang_memory_region_type *) NULL;
p->old_length = (bfd_size_type) (p->current - p->origin);
p->current = p->origin;
}
+
+ for (o = output_bfd->sections; o != NULL; o = o->next)
+ o->_raw_size = 0;
}
/* If the wild pattern was marked KEEP, the member sections
section positions, since they will affect SIZEOF_HEADERS. */
lang_record_phdrs ();
+ /* Size up the sections. */
+ lang_size_sections (statement_list.head,
+ abs_output_section,
+ &statement_list.head, 0, (bfd_vma) 0, NULL);
+
/* Now run around and relax if we can. */
if (command_line.relax)
{
- /* First time round is a trial run to get the 'worst case'
- addresses of the objects if there was no relaxing. */
- lang_size_sections (statement_list.head,
- abs_output_section,
- &(statement_list.head), 0, (bfd_vma) 0, false);
-
/* Keep relaxing until bfd_relax_section gives up. */
+ boolean relax_again;
+
do
{
reset_memory_regions ();
globals are, so can make better guess. */
lang_size_sections (statement_list.head,
abs_output_section,
- &(statement_list.head), 0, (bfd_vma) 0, true);
+ &(statement_list.head), 0, (bfd_vma) 0,
+ &relax_again);
}
while (relax_again);
}
- else
- {
- /* Size up the sections. */
- lang_size_sections (statement_list.head,
- abs_output_section,
- &(statement_list.head), 0, (bfd_vma) 0, false);
- }
/* See if anything special should be done now we know how big
everything is. */
projects / deliverable / binutils-gdb.git / commitdiff
