pinctrl: cygnus: add gpio/pinconf driver
authorRay Jui <rjui@broadcom.com>
Mon, 9 Mar 2015 20:45:00 +0000 (13:45 -0700)
committerLinus Walleij <linus.walleij@linaro.org>
Wed, 18 Mar 2015 01:02:19 +0000 (02:02 +0100)
This adds the initial support of the Broadcom Cygnus GPIO/PINCONF driver
that supports all 3 GPIO controllers on Cygnus including the ASIU GPIO
controller, the chipCommonG GPIO controller, and the always-on GPIO
controller. Basic PINCONF configurations such as bias pull up/down, and
drive strength are also supported in this driver.

Pins from the ASIU GPIO controller can be individually muxed to GPIO
function, through interaction with the Cygnus IOMUX controller

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/bcm/Kconfig
drivers/pinctrl/bcm/Makefile
drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c [new file with mode: 0644]

index eb1320152a8757795480e44dc4ee37192b799c35..cd11d4d9ad58f86c719eca0193c9fe08ffd16f21 100644 (file)
@@ -20,6 +20,28 @@ config PINCTRL_BCM2835
        select PINMUX
        select PINCONF
 
+config PINCTRL_CYGNUS_GPIO
+       bool "Broadcom Cygnus GPIO (with PINCONF) driver"
+       depends on OF_GPIO && ARCH_BCM_CYGNUS
+       select GPIOLIB_IRQCHIP
+       select PINCONF
+       select GENERIC_PINCONF
+       default ARCH_BCM_CYGNUS
+       help
+         Say yes here to enable the Broadcom Cygnus GPIO driver.
+
+         The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
+         GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
+         the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
+         supported by this driver.
+
+         All 3 Cygnus GPIO controllers support basic PINCONF functions such
+         as bias pull up, pull down, and drive strength configurations, when
+         these pins are muxed to GPIO.
+
+         Pins from the ASIU GPIO can be individually muxed to GPIO function,
+         through interaction with the Cygnus IOMUX controller.
+
 config PINCTRL_CYGNUS_MUX
        bool "Broadcom Cygnus IOMUX driver"
        depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
index bb6beb66d962c31df824304f94f1282ec46cc329..2b2f70ee804ccd607703a42698027f3435b9c760 100644 (file)
@@ -2,4 +2,5 @@
 
 obj-$(CONFIG_PINCTRL_BCM281XX)         += pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_BCM2835)          += pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_CYGNUS_GPIO)      += pinctrl-cygnus-gpio.o
 obj-$(CONFIG_PINCTRL_CYGNUS_MUX)       += pinctrl-cygnus-mux.o
diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c b/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c
new file mode 100644 (file)
index 0000000..4ad5c1a
--- /dev/null
@@ -0,0 +1,907 @@
+/*
+ * Copyright (C) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Broadcom Cygnus GPIO driver that supports 3
+ * GPIO controllers on Cygnus including the ASIU GPIO controller, the
+ * chipCommonG GPIO controller, and the always-on GPIO controller. Basic
+ * PINCONF such as bias pull up/down, and drive strength are also supported
+ * in this driver.
+ *
+ * Pins from the ASIU GPIO can be individually muxed to GPIO function,
+ * through the interaction with the Cygnus IOMUX controller
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "../pinctrl-utils.h"
+
+#define CYGNUS_GPIO_DATA_IN_OFFSET   0x00
+#define CYGNUS_GPIO_DATA_OUT_OFFSET  0x04
+#define CYGNUS_GPIO_OUT_EN_OFFSET    0x08
+#define CYGNUS_GPIO_IN_TYPE_OFFSET   0x0c
+#define CYGNUS_GPIO_INT_DE_OFFSET    0x10
+#define CYGNUS_GPIO_INT_EDGE_OFFSET  0x14
+#define CYGNUS_GPIO_INT_MSK_OFFSET   0x18
+#define CYGNUS_GPIO_INT_STAT_OFFSET  0x1c
+#define CYGNUS_GPIO_INT_MSTAT_OFFSET 0x20
+#define CYGNUS_GPIO_INT_CLR_OFFSET   0x24
+#define CYGNUS_GPIO_PAD_RES_OFFSET   0x34
+#define CYGNUS_GPIO_RES_EN_OFFSET    0x38
+
+/* drive strength control for ASIU GPIO */
+#define CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
+
+/* drive strength control for CCM/CRMU (AON) GPIO */
+#define CYGNUS_GPIO_DRV0_CTRL_OFFSET  0x00
+
+#define GPIO_BANK_SIZE 0x200
+#define NGPIOS_PER_BANK 32
+#define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
+
+#define CYGNUS_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
+#define CYGNUS_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
+
+#define GPIO_DRV_STRENGTH_BIT_SHIFT  20
+#define GPIO_DRV_STRENGTH_BITS       3
+#define GPIO_DRV_STRENGTH_BIT_MASK   ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
+
+/*
+ * Cygnus GPIO core
+ *
+ * @dev: pointer to device
+ * @base: I/O register base for Cygnus GPIO controller
+ * @io_ctrl: I/O register base for certain type of Cygnus GPIO controller that
+ * has the PINCONF support implemented outside of the GPIO block
+ * @lock: lock to protect access to I/O registers
+ * @gc: GPIO chip
+ * @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs
+ * @pinmux_is_supported: flag to indicate this GPIO controller contains pins
+ * that can be individually muxed to GPIO
+ * @pctl: pointer to pinctrl_dev
+ * @pctldesc: pinctrl descriptor
+ */
+struct cygnus_gpio {
+       struct device *dev;
+
+       void __iomem *base;
+       void __iomem *io_ctrl;
+
+       spinlock_t lock;
+
+       struct gpio_chip gc;
+       unsigned num_banks;
+
+       bool pinmux_is_supported;
+
+       struct pinctrl_dev *pctl;
+       struct pinctrl_desc pctldesc;
+};
+
+static inline struct cygnus_gpio *to_cygnus_gpio(struct gpio_chip *gc)
+{
+       return container_of(gc, struct cygnus_gpio, gc);
+}
+
+/*
+ * Mapping from PINCONF pins to GPIO pins is 1-to-1
+ */
+static inline unsigned cygnus_pin_to_gpio(unsigned pin)
+{
+       return pin;
+}
+
+/**
+ *  cygnus_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  Cygnus GPIO register
+ *
+ *  @cygnus_gpio: Cygnus GPIO device
+ *  @reg: register offset
+ *  @gpio: GPIO pin
+ *  @set: set or clear
+ */
+static inline void cygnus_set_bit(struct cygnus_gpio *chip, unsigned int reg,
+                                 unsigned gpio, bool set)
+{
+       unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
+       unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+       u32 val;
+
+       val = readl(chip->base + offset);
+       if (set)
+               val |= BIT(shift);
+       else
+               val &= ~BIT(shift);
+       writel(val, chip->base + offset);
+}
+
+static inline bool cygnus_get_bit(struct cygnus_gpio *chip, unsigned int reg,
+                                 unsigned gpio)
+{
+       unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
+       unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+
+       return !!(readl(chip->base + offset) & BIT(shift));
+}
+
+static void cygnus_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+       struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+       int i, bit;
+
+       chained_irq_enter(irq_chip, desc);
+
+       /* go through the entire GPIO banks and handle all interrupts */
+       for (i = 0; i < chip->num_banks; i++) {
+               unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
+                                         CYGNUS_GPIO_INT_MSTAT_OFFSET);
+
+               for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
+                       unsigned pin = NGPIOS_PER_BANK * i + bit;
+                       int child_irq = irq_find_mapping(gc->irqdomain, pin);
+
+                       /*
+                        * Clear the interrupt before invoking the
+                        * handler, so we do not leave any window
+                        */
+                       writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
+                              CYGNUS_GPIO_INT_CLR_OFFSET);
+
+                       generic_handle_irq(child_irq);
+               }
+       }
+
+       chained_irq_exit(irq_chip, desc);
+}
+
+
+static void cygnus_gpio_irq_ack(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned gpio = d->hwirq;
+       unsigned int offset = CYGNUS_GPIO_REG(gpio,
+                       CYGNUS_GPIO_INT_CLR_OFFSET);
+       unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+       u32 val = BIT(shift);
+
+       writel(val, chip->base + offset);
+}
+
+/**
+ *  cygnus_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *
+ *  @d: IRQ chip data
+ *  @unmask: mask/unmask GPIO interrupt
+ */
+static void cygnus_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned gpio = d->hwirq;
+
+       cygnus_set_bit(chip, CYGNUS_GPIO_INT_MSK_OFFSET, gpio, unmask);
+}
+
+static void cygnus_gpio_irq_mask(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+       cygnus_gpio_irq_set_mask(d, false);
+       spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void cygnus_gpio_irq_unmask(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+       cygnus_gpio_irq_set_mask(d, true);
+       spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned gpio = d->hwirq;
+       bool level_triggered = false;
+       bool dual_edge = false;
+       bool rising_or_high = false;
+       unsigned long flags;
+
+       switch (type & IRQ_TYPE_SENSE_MASK) {
+       case IRQ_TYPE_EDGE_RISING:
+               rising_or_high = true;
+               break;
+
+       case IRQ_TYPE_EDGE_FALLING:
+               break;
+
+       case IRQ_TYPE_EDGE_BOTH:
+               dual_edge = true;
+               break;
+
+       case IRQ_TYPE_LEVEL_HIGH:
+               level_triggered = true;
+               rising_or_high = true;
+               break;
+
+       case IRQ_TYPE_LEVEL_LOW:
+               level_triggered = true;
+               break;
+
+       default:
+               dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
+                       type);
+               return -EINVAL;
+       }
+
+       spin_lock_irqsave(&chip->lock, flags);
+       cygnus_set_bit(chip, CYGNUS_GPIO_IN_TYPE_OFFSET, gpio,
+                      level_triggered);
+       cygnus_set_bit(chip, CYGNUS_GPIO_INT_DE_OFFSET, gpio, dual_edge);
+       cygnus_set_bit(chip, CYGNUS_GPIO_INT_EDGE_OFFSET, gpio,
+                      rising_or_high);
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       dev_dbg(chip->dev,
+               "gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n",
+               gpio, level_triggered, dual_edge, rising_or_high);
+
+       return 0;
+}
+
+static struct irq_chip cygnus_gpio_irq_chip = {
+       .name = "bcm-cygnus-gpio",
+       .irq_ack = cygnus_gpio_irq_ack,
+       .irq_mask = cygnus_gpio_irq_mask,
+       .irq_unmask = cygnus_gpio_irq_unmask,
+       .irq_set_type = cygnus_gpio_irq_set_type,
+};
+
+/*
+ * Request the Cygnus IOMUX pinmux controller to mux individual pins to GPIO
+ */
+static int cygnus_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned gpio = gc->base + offset;
+
+       /* not all Cygnus GPIO pins can be muxed individually */
+       if (!chip->pinmux_is_supported)
+               return 0;
+
+       return pinctrl_request_gpio(gpio);
+}
+
+static void cygnus_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned gpio = gc->base + offset;
+
+       if (!chip->pinmux_is_supported)
+               return;
+
+       pinctrl_free_gpio(gpio);
+}
+
+static int cygnus_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+       cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, false);
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
+
+       return 0;
+}
+
+static int cygnus_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+                                       int val)
+{
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+       cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, true);
+       cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
+
+       return 0;
+}
+
+static void cygnus_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+       cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
+}
+
+static int cygnus_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+       struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+       unsigned int offset = CYGNUS_GPIO_REG(gpio,
+                                             CYGNUS_GPIO_DATA_IN_OFFSET);
+       unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+
+       return !!(readl(chip->base + offset) & BIT(shift));
+}
+
+static int cygnus_get_groups_count(struct pinctrl_dev *pctldev)
+{
+       return 1;
+}
+
+/*
+ * Only one group: "gpio_grp", since this local pinctrl device only performs
+ * GPIO specific PINCONF configurations
+ */
+static const char *cygnus_get_group_name(struct pinctrl_dev *pctldev,
+                                        unsigned selector)
+{
+       return "gpio_grp";
+}
+
+static const struct pinctrl_ops cygnus_pctrl_ops = {
+       .get_groups_count = cygnus_get_groups_count,
+       .get_group_name = cygnus_get_group_name,
+       .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+       .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int cygnus_gpio_set_pull(struct cygnus_gpio *chip, unsigned gpio,
+                               bool disable, bool pull_up)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+
+       if (disable) {
+               cygnus_set_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio, false);
+       } else {
+               cygnus_set_bit(chip, CYGNUS_GPIO_PAD_RES_OFFSET, gpio,
+                              pull_up);
+               cygnus_set_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio, true);
+       }
+
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up);
+
+       return 0;
+}
+
+static void cygnus_gpio_get_pull(struct cygnus_gpio *chip, unsigned gpio,
+                                bool *disable, bool *pull_up)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->lock, flags);
+       *disable = !cygnus_get_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio);
+       *pull_up = cygnus_get_bit(chip, CYGNUS_GPIO_PAD_RES_OFFSET, gpio);
+       spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int cygnus_gpio_set_strength(struct cygnus_gpio *chip, unsigned gpio,
+                                   unsigned strength)
+{
+       void __iomem *base;
+       unsigned int i, offset, shift;
+       u32 val;
+       unsigned long flags;
+
+       /* make sure drive strength is supported */
+       if (strength < 2 ||  strength > 16 || (strength % 2))
+               return -ENOTSUPP;
+
+       if (chip->io_ctrl) {
+               base = chip->io_ctrl;
+               offset = CYGNUS_GPIO_DRV0_CTRL_OFFSET;
+       } else {
+               base = chip->base;
+               offset = CYGNUS_GPIO_REG(gpio,
+                                        CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET);
+       }
+
+       shift = CYGNUS_GPIO_SHIFT(gpio);
+
+       dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
+               strength);
+
+       spin_lock_irqsave(&chip->lock, flags);
+       strength = (strength / 2) - 1;
+       for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+               val = readl(base + offset);
+               val &= ~BIT(shift);
+               val |= ((strength >> i) & 0x1) << shift;
+               writel(val, base + offset);
+               offset += 4;
+       }
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       return 0;
+}
+
+static int cygnus_gpio_get_strength(struct cygnus_gpio *chip, unsigned gpio,
+                                   u16 *strength)
+{
+       void __iomem *base;
+       unsigned int i, offset, shift;
+       u32 val;
+       unsigned long flags;
+
+       if (chip->io_ctrl) {
+               base = chip->io_ctrl;
+               offset = CYGNUS_GPIO_DRV0_CTRL_OFFSET;
+       } else {
+               base = chip->base;
+               offset = CYGNUS_GPIO_REG(gpio,
+                                        CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET);
+       }
+
+       shift = CYGNUS_GPIO_SHIFT(gpio);
+
+       spin_lock_irqsave(&chip->lock, flags);
+       *strength = 0;
+       for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+               val = readl(base + offset) & BIT(shift);
+               val >>= shift;
+               *strength += (val << i);
+               offset += 4;
+       }
+
+       /* convert to mA */
+       *strength = (*strength + 1) * 2;
+       spin_unlock_irqrestore(&chip->lock, flags);
+
+       return 0;
+}
+
+static int cygnus_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+                                unsigned long *config)
+{
+       struct cygnus_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+       enum pin_config_param param = pinconf_to_config_param(*config);
+       unsigned gpio = cygnus_pin_to_gpio(pin);
+       u16 arg;
+       bool disable, pull_up;
+       int ret;
+
+       switch (param) {
+       case PIN_CONFIG_BIAS_DISABLE:
+               cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
+               if (disable)
+                       return 0;
+               else
+                       return -EINVAL;
+
+       case PIN_CONFIG_BIAS_PULL_UP:
+               cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
+               if (!disable && pull_up)
+                       return 0;
+               else
+                       return -EINVAL;
+
+       case PIN_CONFIG_BIAS_PULL_DOWN:
+               cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
+               if (!disable && !pull_up)
+                       return 0;
+               else
+                       return -EINVAL;
+
+       case PIN_CONFIG_DRIVE_STRENGTH:
+               ret = cygnus_gpio_get_strength(chip, gpio, &arg);
+               if (ret)
+                       return ret;
+               else
+                       *config = pinconf_to_config_packed(param, arg);
+
+               return 0;
+
+       default:
+               return -ENOTSUPP;
+       }
+
+       return -ENOTSUPP;
+}
+
+static int cygnus_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+                                unsigned long *configs, unsigned num_configs)
+{
+       struct cygnus_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+       enum pin_config_param param;
+       u16 arg;
+       unsigned i, gpio = cygnus_pin_to_gpio(pin);
+       int ret = -ENOTSUPP;
+
+       for (i = 0; i < num_configs; i++) {
+               param = pinconf_to_config_param(configs[i]);
+               arg = pinconf_to_config_argument(configs[i]);
+
+               switch (param) {
+               case PIN_CONFIG_BIAS_DISABLE:
+                       ret = cygnus_gpio_set_pull(chip, gpio, true, false);
+                       if (ret < 0)
+                               goto out;
+                       break;
+
+               case PIN_CONFIG_BIAS_PULL_UP:
+                       ret = cygnus_gpio_set_pull(chip, gpio, false, true);
+                       if (ret < 0)
+                               goto out;
+                       break;
+
+               case PIN_CONFIG_BIAS_PULL_DOWN:
+                       ret = cygnus_gpio_set_pull(chip, gpio, false, false);
+                       if (ret < 0)
+                               goto out;
+                       break;
+
+               case PIN_CONFIG_DRIVE_STRENGTH:
+                       ret = cygnus_gpio_set_strength(chip, gpio, arg);
+                       if (ret < 0)
+                               goto out;
+                       break;
+
+               default:
+                       dev_err(chip->dev, "invalid configuration\n");
+                       return -ENOTSUPP;
+               }
+       } /* for each config */
+
+out:
+       return ret;
+}
+
+static const struct pinconf_ops cygnus_pconf_ops = {
+       .is_generic = true,
+       .pin_config_get = cygnus_pin_config_get,
+       .pin_config_set = cygnus_pin_config_set,
+};
+
+/*
+ * Map a GPIO in the local gpio_chip pin space to a pin in the Cygnus IOMUX
+ * pinctrl pin space
+ */
+struct cygnus_gpio_pin_range {
+       unsigned offset;
+       unsigned pin_base;
+       unsigned num_pins;
+};
+
+#define CYGNUS_PINRANGE(o, p, n) { .offset = o, .pin_base = p, .num_pins = n }
+
+/*
+ * Pin mapping table for mapping local GPIO pins to Cygnus IOMUX pinctrl pins
+ */
+static const struct cygnus_gpio_pin_range cygnus_gpio_pintable[] = {
+       CYGNUS_PINRANGE(0, 42, 1),
+       CYGNUS_PINRANGE(1, 44, 3),
+       CYGNUS_PINRANGE(4, 48, 1),
+       CYGNUS_PINRANGE(5, 50, 3),
+       CYGNUS_PINRANGE(8, 126, 1),
+       CYGNUS_PINRANGE(9, 155, 1),
+       CYGNUS_PINRANGE(10, 152, 1),
+       CYGNUS_PINRANGE(11, 154, 1),
+       CYGNUS_PINRANGE(12, 153, 1),
+       CYGNUS_PINRANGE(13, 127, 3),
+       CYGNUS_PINRANGE(16, 140, 1),
+       CYGNUS_PINRANGE(17, 145, 7),
+       CYGNUS_PINRANGE(24, 130, 10),
+       CYGNUS_PINRANGE(34, 141, 4),
+       CYGNUS_PINRANGE(38, 54, 1),
+       CYGNUS_PINRANGE(39, 56, 3),
+       CYGNUS_PINRANGE(42, 60, 3),
+       CYGNUS_PINRANGE(45, 64, 3),
+       CYGNUS_PINRANGE(48, 68, 2),
+       CYGNUS_PINRANGE(50, 84, 6),
+       CYGNUS_PINRANGE(56, 94, 6),
+       CYGNUS_PINRANGE(62, 72, 1),
+       CYGNUS_PINRANGE(63, 70, 1),
+       CYGNUS_PINRANGE(64, 80, 1),
+       CYGNUS_PINRANGE(65, 74, 3),
+       CYGNUS_PINRANGE(68, 78, 1),
+       CYGNUS_PINRANGE(69, 82, 1),
+       CYGNUS_PINRANGE(70, 156, 17),
+       CYGNUS_PINRANGE(87, 104, 12),
+       CYGNUS_PINRANGE(99, 102, 2),
+       CYGNUS_PINRANGE(101, 90, 4),
+       CYGNUS_PINRANGE(105, 116, 10),
+       CYGNUS_PINRANGE(123, 11, 1),
+       CYGNUS_PINRANGE(124, 38, 4),
+       CYGNUS_PINRANGE(128, 43, 1),
+       CYGNUS_PINRANGE(129, 47, 1),
+       CYGNUS_PINRANGE(130, 49, 1),
+       CYGNUS_PINRANGE(131, 53, 1),
+       CYGNUS_PINRANGE(132, 55, 1),
+       CYGNUS_PINRANGE(133, 59, 1),
+       CYGNUS_PINRANGE(134, 63, 1),
+       CYGNUS_PINRANGE(135, 67, 1),
+       CYGNUS_PINRANGE(136, 71, 1),
+       CYGNUS_PINRANGE(137, 73, 1),
+       CYGNUS_PINRANGE(138, 77, 1),
+       CYGNUS_PINRANGE(139, 79, 1),
+       CYGNUS_PINRANGE(140, 81, 1),
+       CYGNUS_PINRANGE(141, 83, 1),
+       CYGNUS_PINRANGE(142, 10, 1)
+};
+
+/*
+ * The Cygnus IOMUX controller mainly supports group based mux configuration,
+ * but certain pins can be muxed to GPIO individually. Only the ASIU GPIO
+ * controller can support this, so it's an optional configuration
+ *
+ * Return -ENODEV means no support and that's fine
+ */
+static int cygnus_gpio_pinmux_add_range(struct cygnus_gpio *chip)
+{
+       struct device_node *node = chip->dev->of_node;
+       struct device_node *pinmux_node;
+       struct platform_device *pinmux_pdev;
+       struct gpio_chip *gc = &chip->gc;
+       int i, ret = 0;
+
+       /* parse DT to find the phandle to the pinmux controller */
+       pinmux_node = of_parse_phandle(node, "pinmux", 0);
+       if (!pinmux_node)
+               return -ENODEV;
+
+       pinmux_pdev = of_find_device_by_node(pinmux_node);
+       /* no longer need the pinmux node */
+       of_node_put(pinmux_node);
+       if (!pinmux_pdev) {
+               dev_err(chip->dev, "failed to get pinmux device\n");
+               return -EINVAL;
+       }
+
+       /* now need to create the mapping between local GPIO and PINMUX pins */
+       for (i = 0; i < ARRAY_SIZE(cygnus_gpio_pintable); i++) {
+               ret = gpiochip_add_pin_range(gc, dev_name(&pinmux_pdev->dev),
+                                            cygnus_gpio_pintable[i].offset,
+                                            cygnus_gpio_pintable[i].pin_base,
+                                            cygnus_gpio_pintable[i].num_pins);
+               if (ret) {
+                       dev_err(chip->dev, "unable to add GPIO pin range\n");
+                       goto err_put_device;
+               }
+       }
+
+       chip->pinmux_is_supported = true;
+
+       /* no need for pinmux_pdev device reference anymore */
+       put_device(&pinmux_pdev->dev);
+       return 0;
+
+err_put_device:
+       put_device(&pinmux_pdev->dev);
+       gpiochip_remove_pin_ranges(gc);
+       return ret;
+}
+
+/*
+ * Cygnus GPIO controller supports some PINCONF related configurations such as
+ * pull up, pull down, and drive strength, when the pin is configured to GPIO
+ *
+ * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
+ * local GPIO pins
+ */
+static int cygnus_gpio_register_pinconf(struct cygnus_gpio *chip)
+{
+       struct pinctrl_desc *pctldesc = &chip->pctldesc;
+       struct pinctrl_pin_desc *pins;
+       struct gpio_chip *gc = &chip->gc;
+       int i;
+
+       pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
+       if (!pins)
+               return -ENOMEM;
+
+       for (i = 0; i < gc->ngpio; i++) {
+               pins[i].number = i;
+               pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
+                                             "gpio-%d", i);
+               if (!pins[i].name)
+                       return -ENOMEM;
+       }
+
+       pctldesc->name = dev_name(chip->dev);
+       pctldesc->pctlops = &cygnus_pctrl_ops;
+       pctldesc->pins = pins;
+       pctldesc->npins = gc->ngpio;
+       pctldesc->confops = &cygnus_pconf_ops;
+
+       chip->pctl = pinctrl_register(pctldesc, chip->dev, chip);
+       if (!chip->pctl) {
+               dev_err(chip->dev, "unable to register pinctrl device\n");
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static void cygnus_gpio_unregister_pinconf(struct cygnus_gpio *chip)
+{
+       if (chip->pctl)
+               pinctrl_unregister(chip->pctl);
+}
+
+struct cygnus_gpio_data {
+       unsigned num_gpios;
+};
+
+static const struct cygnus_gpio_data cygnus_cmm_gpio_data = {
+       .num_gpios = 24,
+};
+
+static const struct cygnus_gpio_data cygnus_asiu_gpio_data = {
+       .num_gpios = 146,
+};
+
+static const struct cygnus_gpio_data cygnus_crmu_gpio_data = {
+       .num_gpios = 6,
+};
+
+static const struct of_device_id cygnus_gpio_of_match[] = {
+       {
+               .compatible = "brcm,cygnus-ccm-gpio",
+               .data = &cygnus_cmm_gpio_data,
+       },
+       {
+               .compatible = "brcm,cygnus-asiu-gpio",
+               .data = &cygnus_asiu_gpio_data,
+       },
+       {
+               .compatible = "brcm,cygnus-crmu-gpio",
+               .data = &cygnus_crmu_gpio_data,
+       }
+};
+
+static int cygnus_gpio_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct resource *res;
+       struct cygnus_gpio *chip;
+       struct gpio_chip *gc;
+       u32 ngpios;
+       int irq, ret;
+       const struct of_device_id *match;
+       const struct cygnus_gpio_data *gpio_data;
+
+       match = of_match_device(cygnus_gpio_of_match, dev);
+       if (!match)
+               return -ENODEV;
+       gpio_data = match->data;
+       ngpios = gpio_data->num_gpios;
+
+       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+       if (!chip)
+               return -ENOMEM;
+
+       chip->dev = dev;
+       platform_set_drvdata(pdev, chip);
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       chip->base = devm_ioremap_resource(dev, res);
+       if (IS_ERR(chip->base)) {
+               dev_err(dev, "unable to map I/O memory\n");
+               return PTR_ERR(chip->base);
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+       if (res) {
+               chip->io_ctrl = devm_ioremap_resource(dev, res);
+               if (IS_ERR(chip->io_ctrl)) {
+                       dev_err(dev, "unable to map I/O memory\n");
+                       return PTR_ERR(chip->io_ctrl);
+               }
+       }
+
+       spin_lock_init(&chip->lock);
+
+       gc = &chip->gc;
+       gc->base = -1;
+       gc->ngpio = ngpios;
+       chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
+       gc->label = dev_name(dev);
+       gc->dev = dev;
+       gc->of_node = dev->of_node;
+       gc->request = cygnus_gpio_request;
+       gc->free = cygnus_gpio_free;
+       gc->direction_input = cygnus_gpio_direction_input;
+       gc->direction_output = cygnus_gpio_direction_output;
+       gc->set = cygnus_gpio_set;
+       gc->get = cygnus_gpio_get;
+
+       ret = gpiochip_add(gc);
+       if (ret < 0) {
+               dev_err(dev, "unable to add GPIO chip\n");
+               return ret;
+       }
+
+       ret = cygnus_gpio_pinmux_add_range(chip);
+       if (ret && ret != -ENODEV) {
+               dev_err(dev, "unable to add GPIO pin range\n");
+               goto err_rm_gpiochip;
+       }
+
+       ret = cygnus_gpio_register_pinconf(chip);
+       if (ret) {
+               dev_err(dev, "unable to register pinconf\n");
+               goto err_rm_gpiochip;
+       }
+
+       /* optional GPIO interrupt support */
+       irq = platform_get_irq(pdev, 0);
+       if (irq) {
+               ret = gpiochip_irqchip_add(gc, &cygnus_gpio_irq_chip, 0,
+                                          handle_simple_irq, IRQ_TYPE_NONE);
+               if (ret) {
+                       dev_err(dev, "no GPIO irqchip\n");
+                       goto err_unregister_pinconf;
+               }
+
+               gpiochip_set_chained_irqchip(gc, &cygnus_gpio_irq_chip, irq,
+                                            cygnus_gpio_irq_handler);
+       }
+
+       return 0;
+
+err_unregister_pinconf:
+       cygnus_gpio_unregister_pinconf(chip);
+
+err_rm_gpiochip:
+       gpiochip_remove(gc);
+
+       return ret;
+}
+
+static struct platform_driver cygnus_gpio_driver = {
+       .driver = {
+               .name = "cygnus-gpio",
+               .of_match_table = cygnus_gpio_of_match,
+       },
+       .probe = cygnus_gpio_probe,
+};
+
+static int __init cygnus_gpio_init(void)
+{
+       return platform_driver_probe(&cygnus_gpio_driver, cygnus_gpio_probe);
+}
+arch_initcall_sync(cygnus_gpio_init);
This page took 0.050862 seconds and 5 git commands to generate.