#include "elf-bfd.h"
#include "symcat.h"
+/* A useful bit in the CP0 status register (PS_REGNUM). */
+/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
+#define ST0_FR (1 << 26)
+
/* The sizes of floating point registers. */
enum
return 4;
}
+/* Determine if a MIPS3 or later cpu is operating in MIPS{1,2} FPU
+ compatiblity mode. A return value of 1 means that we have
+ physical 64-bit registers, but should treat them as 32-bit registers. */
+
+static int
+mips2_fp_compat (void)
+{
+ /* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not
+ meaningful. */
+ if (REGISTER_RAW_SIZE (FP0_REGNUM) == 4)
+ return 0;
+
+#if 0
+ /* FIXME drow 2002-03-10: This is disabled until we can do it consistently,
+ in all the places we deal with FP registers. PR gdb/413. */
+ /* Otherwise check the FR bit in the status register - it controls
+ the FP compatiblity mode. If it is clear we are in compatibility
+ mode. */
+ if ((read_register (PS_REGNUM) & ST0_FR) == 0)
+ return 1;
+#endif
+
+ return 0;
+}
+
/* Indicate that the ABI makes use of double-precision registers
provided by the FPU (rather than combining pairs of registers to
form double-precision values). Do not use "TARGET_IS_MIPS64" to
static CORE_ADDR after_prologue (CORE_ADDR pc,
mips_extra_func_info_t proc_desc);
+static void mips_read_fp_register_single (int regno, char *rare_buffer);
+static void mips_read_fp_register_double (int regno, char *rare_buffer);
+
/* This value is the model of MIPS in use. It is derived from the value
of the PrID register. */
}
}
+/* Floating point register management.
+
+ Background: MIPS1 & 2 fp registers are 32 bits wide. To support
+ 64bit operations, these early MIPS cpus treat fp register pairs
+ (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp
+ registers and offer a compatibility mode that emulates the MIPS2 fp
+ model. When operating in MIPS2 fp compat mode, later cpu's split
+ double precision floats into two 32-bit chunks and store them in
+ consecutive fp regs. To display 64-bit floats stored in this
+ fashion, we have to combine 32 bits from f0 and 32 bits from f1.
+ Throw in user-configurable endianness and you have a real mess.
+
+ The way this works is:
+ - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit
+ double-precision value will be split across two logical registers.
+ The lower-numbered logical register will hold the low-order bits,
+ regardless of the processor's endianness.
+ - If we are on a 64-bit processor, and we are looking for a
+ single-precision value, it will be in the low ordered bits
+ of a 64-bit GPR (after mfc1, for example) or a 64-bit register
+ save slot in memory.
+ - If we are in 64-bit mode, everything is straightforward.
+
+ Note that this code only deals with "live" registers at the top of the
+ stack. We will attempt to deal with saved registers later, when
+ the raw/cooked register interface is in place. (We need a general
+ interface that can deal with dynamic saved register sizes -- fp
+ regs could be 32 bits wide in one frame and 64 on the frame above
+ and below). */
+
+/* Copy a 32-bit single-precision value from the current frame
+ into rare_buffer. */
+
+static void
+mips_read_fp_register_single (int regno, char *rare_buffer)
+{
+ int raw_size = REGISTER_RAW_SIZE (regno);
+ char *raw_buffer = alloca (raw_size);
+
+ if (read_relative_register_raw_bytes (regno, raw_buffer))
+ error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ if (raw_size == 8)
+ {
+ /* We have a 64-bit value for this register. Find the low-order
+ 32 bits. */
+ int offset;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ offset = 4;
+ else
+ offset = 0;
+
+ memcpy (rare_buffer, raw_buffer + offset, 4);
+ }
+ else
+ {
+ memcpy (rare_buffer, raw_buffer, 4);
+ }
+}
+
+/* Copy a 64-bit double-precision value from the current frame into
+ rare_buffer. This may include getting half of it from the next
+ register. */
+
+static void
+mips_read_fp_register_double (int regno, char *rare_buffer)
+{
+ int raw_size = REGISTER_RAW_SIZE (regno);
+
+ if (raw_size == 8 && !mips2_fp_compat ())
+ {
+ /* We have a 64-bit value for this register, and we should use
+ all 64 bits. */
+ if (read_relative_register_raw_bytes (regno, rare_buffer))
+ error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ }
+ else
+ {
+ if ((regno - FP0_REGNUM) & 1)
+ internal_error (__FILE__, __LINE__,
+ "mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register");
+
+ /* mips_read_fp_register_single will find the correct 32 bits from
+ each register. */
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ mips_read_fp_register_single (regno, rare_buffer + 4);
+ mips_read_fp_register_single (regno + 1, rare_buffer);
+ }
+ else
+ {
+ mips_read_fp_register_single (regno, rare_buffer);
+ mips_read_fp_register_single (regno + 1, rare_buffer + 4);
+ }
+ }
+}
+
static void
mips_print_register (int regnum, int all)
{
return;
}
- /* If an even floating point register, also print as double. */
+ /* If we have a actual 32-bit floating point register (or we are in
+ 32-bit compatibility mode), and the register is even-numbered,
+ also print it as a double (spanning two registers). */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
+ && (REGISTER_RAW_SIZE (regnum) == 4
+ || mips2_fp_compat ())
&& !((regnum - FP0_REGNUM) & 1))
- if (REGISTER_RAW_SIZE (regnum) == 4) /* this would be silly on MIPS64 or N32 (Irix 6) */
- {
- char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
+ {
+ char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
- read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum + 1, dbuffer + MIPS_REGSIZE);
- REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
+ mips_read_fp_register_double (regnum, dbuffer);
- printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered ("); ");
- }
+ printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
+ val_print (builtin_type_double, dbuffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ printf_filtered ("); ");
+ }
fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
/* The problem with printing numeric register names (r26, etc.) is that
/* If virtual format is floating, print it that way. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (FP_REGISTER_DOUBLE)
- { /* show 8-byte floats as float AND double: */
+ if (REGISTER_RAW_SIZE (regnum) == 8 && !mips2_fp_compat ())
+ {
+ /* We have a meaningful 64-bit value in this register. Show
+ it as a 32-bit float and a 64-bit double. */
int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
printf_filtered (" (float) ");
static int
do_fp_register_row (int regnum)
{ /* do values for FP (float) regs */
- char *raw_buffer[2];
- char *dbl_buffer;
- /* use HI and LO to control the order of combining two flt regs */
- int HI = (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
- int LO = (TARGET_BYTE_ORDER != BFD_ENDIAN_BIG);
+ char *raw_buffer;
double doub, flt1, flt2; /* doubles extracted from raw hex data */
int inv1, inv2, inv3;
- raw_buffer[0] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
- raw_buffer[1] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
- dbl_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ raw_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
- /* Get the data in raw format. */
- if (read_relative_register_raw_bytes (regnum, raw_buffer[HI]))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
- if (REGISTER_RAW_SIZE (regnum) == 4)
+ if (REGISTER_RAW_SIZE (regnum) == 4 || mips2_fp_compat ())
{
- /* 4-byte registers: we can fit two registers per row. */
- /* Also print every pair of 4-byte regs as an 8-byte double. */
- if (read_relative_register_raw_bytes (regnum + 1, raw_buffer[LO]))
- error ("can't read register %d (%s)",
- regnum + 1, REGISTER_NAME (regnum + 1));
-
- /* copy the two floats into one double, and unpack both */
- memcpy (dbl_buffer, raw_buffer, 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
- flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
- flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+ /* 4-byte registers: we can fit two registers per row. */
+ /* Also print every pair of 4-byte regs as an 8-byte double. */
+ mips_read_fp_register_single (regnum, raw_buffer);
+ flt1 = unpack_double (builtin_type_float, raw_buffer, &inv1);
+ mips_read_fp_register_single (regnum + 1, raw_buffer);
+ flt2 = unpack_double (builtin_type_float, raw_buffer, &inv2);
+
+ mips_read_fp_register_double (regnum, raw_buffer);
+ doub = unpack_double (builtin_type_double, raw_buffer, &inv3);
+
printf_filtered (" %-5s", REGISTER_NAME (regnum));
if (inv1)
printf_filtered (": <invalid float>");
regnum += 2;
}
else
- { /* eight byte registers: print each one as float AND as double. */
- int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
-
- memcpy (dbl_buffer, raw_buffer[HI], 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
- flt1 = unpack_double (builtin_type_float,
- &raw_buffer[HI][offset], &inv1);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+ {
+ /* Eight byte registers: print each one as float AND as double. */
+ mips_read_fp_register_single (regnum, raw_buffer);
+ flt1 = unpack_double (builtin_type_double, raw_buffer, &inv1);
+ mips_read_fp_register_double (regnum, raw_buffer);
+ doub = unpack_double (builtin_type_double, raw_buffer, &inv3);
+
printf_filtered (" %-5s: ", REGISTER_NAME (regnum));
if (inv1)
printf_filtered ("<invalid float>");
projects / deliverable / binutils-gdb.git / commitdiff
