Tony Luck [Fri, 17 Oct 2008 20:51:28 +0000 (13:51 -0700)]
Pull pv_ops-xen into release branch
Tony Luck [Fri, 17 Oct 2008 20:51:16 +0000 (13:51 -0700)]
Pull utrace into release branch
Tony Luck [Fri, 17 Oct 2008 20:51:01 +0000 (13:51 -0700)]
Pull compat into release branch
Tony Luck [Fri, 17 Oct 2008 20:47:53 +0000 (13:47 -0700)]
[IA64] Fix annoying IA64_TR_ALLOC_MAX message.
Madison cpus support 64 TR registers. Increase IA64_TR_ALLOC_MAX
to 64. Also fixup the messages that get printed when this limit
is exceeded. Repeating for every cpu is too noisy.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Christoph Hellwig [Mon, 1 Sep 2008 16:18:10 +0000 (18:18 +0200)]
[IA64] kill sys32_pipe
It's just a duplicate of the generic sys_pipe that still lacks the
recently added error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Christoph Hellwig [Mon, 1 Sep 2008 16:16:52 +0000 (18:16 +0200)]
[IA64] remove sys32_pause
It's just a duplicate of the native sys_pause, which we can use after
defining __ARCH_WANT_SYS_PAUSE.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:13 +0000 (11:18 +0900)]
ia64/pv_ops: paravirtualized instruction checker.
This patch implements a checker to detect instructions which
should be paravirtualized instead of direct writing raw instruction.
This patch does rough check so that it doesn't fully cover all cases,
but it can detects most cases of paravirtualization breakage of hand
written assembly codes.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Wed, 28 May 2008 08:13:53 +0000 (17:13 +0900)]
ia64/xen: a recipe for using xen/ia64 with pv_ops.
Recipe for using xen/ia64 with pv_ops domU.
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:11 +0000 (11:18 +0900)]
ia64/pv_ops: update Kconfig for paravirtualized guest and xen.
introduce CONFIG_PARAVIRT_GUEST, CONFIG_PARAVIRT for
paravirtualized guest.
introduce CONFIG_XEN, CONFIG_IA64_XEN_GUEST for xen.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:10 +0000 (11:18 +0900)]
ia64/xen: preliminary support for save/restore.
preliminary support for save/restore.
Although Save/restore isn't fully working yet, this patch is necessary
to compile.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:09 +0000 (11:18 +0900)]
ia64/xen: define xen machine vector for domU.
define xen machine vector for domU.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:08 +0000 (11:18 +0900)]
ia64/pv_ops/xen: implement xen pv_time_ops.
implement xen pv_time_ops to account steal time.
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:07 +0000 (11:18 +0900)]
ia64/pv_ops/xen: implement xen pv_irq_ops.
implement xen pv_irq_ops to paravirtualize irq handling
with xen event channel.
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:06 +0000 (11:18 +0900)]
ia64/pv_ops/xen: define the nubmer of irqs which xen needs.
define arch/ia64/include/asm/xen/irq.h to define the number of
irqs which xen needs.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:05 +0000 (11:18 +0900)]
ia64/pv_ops/xen: implement xen pv_iosapic_ops.
implement xen pv_iosapic_ops for xen paravirtualized
iosapic.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:04 +0000 (11:18 +0900)]
ia64/pv_ops/xen: paravirtualize entry.S for ia64/xen.
paravirtualize entry.S for ia64/xen by multi compile.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:03 +0000 (11:18 +0900)]
ia64/pv_ops/xen: paravirtualize ivt.S for xen.
paravirtualize ivt.S for xen by multi compile.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:02 +0000 (11:18 +0900)]
ia64/pv_ops/xen: paravirtualize DO_SAVE_MIN for xen.
paravirtualize DO_SAVE_MIN in minstate.h for xen.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:01 +0000 (11:18 +0900)]
ia64/pv_ops/xen: define xen paravirtualized instructions for hand written assembly code
define xen paravirtualized instructions for hand written assembly code.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:18:00 +0000 (11:18 +0900)]
ia64/pv_ops/xen: define xen pv_cpu_ops.
define xen pv_cpu_ops which implementes xen paravirtualized
privileged instructions.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:59 +0000 (11:17 +0900)]
ia64/pv_ops/xen: define xen pv_init_ops for various xen initialization.
This patch implements xen version of pv_init_ops to do various
xen initialization.
This patch also includes ia64 counter part of x86 xen early printk support
patches.
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:58 +0000 (11:17 +0900)]
ia64/pv_ops/xen: elf note based xen startup.
This patch enables elf note based xen startup for IA-64, which gives the
kernel an early hint for running on xen like x86 case.
In order to avoid the multi entry point, presumably extending booting
protocol(i.e. extending struct ia64_boot_param) would be necessary.
It probably means that elilo also needs modification.
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:57 +0000 (11:17 +0900)]
ia64/xen: introduce helper function to identify domain mode.
There are four operating modes Xen code may find itself running in:
- native
- hvm domain
- pv dom0
- pv domU
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:56 +0000 (11:17 +0900)]
ia64/xen: add definitions necessary for xen event channel.
Xen paravirtualizes interrupt as event channel.
This patch defines arch specific part of xen event channel.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:55 +0000 (11:17 +0900)]
ia64/xen: implement arch specific part of xen grant table.
Xen implements grant tables which is for sharing pages with
guest domains.
This patch implements arch specific part of grant table initialization.
and xen_alloc_vm_area()/xen_free_vm_area() which are helper functions
for xen grant table.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:54 +0000 (11:17 +0900)]
ia64/xen: xencomm conversion functions for hypercalls
On ia64/xen, pointer arguments for hypercall is passed
by pseudo physical address(guest physical address.)
So such hypercalls needs address conversion functions.
This patch implements concrete conversion functions for
such hypercalls.
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:53 +0000 (11:17 +0900)]
ia64/xen: implement the arch specific part of xencomm.
On ia64/xen, pointer argument for the hypercall is passed
by pseudo physical address (guest physical address.)
So it is necessary to convert virtual address into pseudo physical
address right before issuing hypercall. The frame work is called
xencomm. This patch implements arch specific part.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:52 +0000 (11:17 +0900)]
ia64/xen: define helper functions for xen hypercalls.
introduce helper functions for xen hypercalls which
traps to hypervisor.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:51 +0000 (11:17 +0900)]
ia64/xen: define helper functions for xen related address conversion.
Xen needs some address conversions between pseudo physical
address (guest phsyical address), guest machine address
(real machine address) and dma address.
Define helper functions for those address conversion.
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:50 +0000 (11:17 +0900)]
ia64/xen: add a necessary header file to compile include/xen/interface/xen.h
Create include/asm-ia64/pvclock-abi.h to compile which contains
the same definitions of include/asm-x86/pvclock-abi.h because ia64/xen
uses same structure.
Hopefully include/asm-x86/pvclock-abi.h would be moved to somewhere
more generic.
Another approach is to include include/asm-x86/pvclock-abi.h
from include/asm-ia64/pvclock-abi.h. But this would break
if/when x86 header files are moved under arch/x86.
So for now, same definitions are duplicated as suggested by Tony.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:49 +0000 (11:17 +0900)]
ia64/xen: define several constants for ia64/xen.
define several constants for ia64/xen.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:48 +0000 (11:17 +0900)]
ia64/xen: introduce definitions necessary for ia64/xen hypercalls.
import arch/ia64/include/asm/xen/interface.h to introduce
definitions necessary for ia64/xen hypercalls.
They are basic structures to communicate with xen hypervisor and
will be used later.
Cc: Robin Holt <holt@sgi.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:47 +0000 (11:17 +0900)]
ia64/xen: increase IA64_MAX_RSVD_REGIONS.
Xenlinux/ia64 needs to reserve one more region passed from xen hypervisor
as start info.
Cc: Robin Holt <holt@sgi.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:46 +0000 (11:17 +0900)]
ia64/xen: introduce sync bitops which is necessary for ia64/xen support.
define sync bitops which is necessary for ia64/xen.
This bit operation is used to communicate with VMM or other guest kernel
Even when this kernel is built for UP, VMM might be SMP so that those operation
must always use atomic operation.
Cc: Robin Holt <holt@sgi.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:45 +0000 (11:17 +0900)]
ia64/xen: reserve "break" numbers used for xen hypercalls.
reserve "break" numbers used for xen hypercalls to avoid
reuse for something else.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:44 +0000 (11:17 +0900)]
ia64: move function declaration, ia64_cpu_local_tick() from .c to .h
eliminate the function declaration ia64_cpu_local_tick() in
process.c by defining in arch/ia64/include/asm/timex.h
The same function will be used in a different .c file later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:43 +0000 (11:17 +0900)]
ia64/pv_ops: update native/inst.h to clobber predicate.
add CLOBBER_PRED() to clobber predicate register.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Isaku Yamahata [Fri, 17 Oct 2008 02:17:42 +0000 (11:17 +0900)]
ia64/pv_ops: avoid name conflict of get_irq_chip().
The macro get_irq_chip() is defined in linux/include/linux/irq.h
which cause name conflict with one in linux/arch/ia64/include/asm/paravirt.h.
rename the latter to __get_irq_chip().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Fri, 17 Oct 2008 16:50:12 +0000 (09:50 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits)
staging: at76_usb wireless driver
Staging: workaround build system bug
Staging: Lindent sxg.c
Staging: SLICOSS: Call pci_release_regions at driver exit
Staging: SLICOSS: Fix remaining type names
Staging: SLICOSS: Fix warnings due to static usage
Staging: SLICOSS: lots of checkpatch fixes
Staging: go7007 v4l fixes
Staging: Fix gcc warnings in sxg
Staging: add echo cancelation module
Staging: add wlan-ng prism2 usb driver
Staging: add w35und wifi driver
Staging: USB/IP: add host driver
Staging: USB/IP: add client driver
Staging: USB/IP: add common functions needed
Staging: add the go7007 video driver
Staging: add me4000 pci data collection driver
Staging: add me4000 firmware files
Staging: add sxg network driver
Staging: add Alacritech slicoss network driver
...
Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in
MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
Isaku Yamahata [Fri, 17 Oct 2008 02:17:41 +0000 (11:17 +0900)]
ia64/pv_ops: fix paravirtualization of ivt.S with CONFIG_SMP=n
When CONFIG_SMP=n, three instruction in ivt.S were missed to paravirtualize.
paravirtualize them.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Fri, 17 Oct 2008 16:33:39 +0000 (09:33 -0700)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits)
hwmon: (adm1026) Prevent log spamming
hwmon: (adm1026) Fix debug messages
hwmon: (adm1029) Use mask for fan_div value
hwmon: (adt7470) Add documentation
hwmon: (ibmaem) Automatically load on IBM systems via DMI
hwmon: (ibmpex) Automatically load on IBM systems via DMI
hwmon: (w83781d) Use new style driver binding
hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices
hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA
hwmon: (w83781d) Additional information about AS99127F PWM
hwmon: (w83781d) Detect alias chips
hwmon: (w83781d) Refactor beep enable handling
hwmon: Drop dead links to old National Semiconductor chip datasheets
hwmon: (w83791d) add support for thermal cruise mode
hwmon: (w83791d) add pwm_enable support
hwmon: (w83791d) add manual PWM support
hwmon: (w83791d) fan 4/5 pins can also be used for gpio
hwmon: (max1619) Use inline functions instead of macros
hwmon: (it87) Fix thermal sensor type values
hwmon: (lm78) Convert to a new-style i2c driver
...
Linus Torvalds [Fri, 17 Oct 2008 16:30:35 +0000 (09:30 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: Fix debugfs_create_dir's error checking method for sound/soc/
ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API
ALSA: kernel docs: fix sound/core/ kernel-doc
ALSA: Handle NULL jacks in snd_jack_report()
ALSA: hda - Fix PCM type of Nvidia HDMI devices
Linus Torvalds [Fri, 17 Oct 2008 16:29:55 +0000 (09:29 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: remove __generic_unplug_device() from exports
block: move q->unplug_work initialization
blktrace: pass zfcp driver data
blktrace: add support for driver data
block: fix current kernel-doc warnings
block: only call ->request_fn when the queue is not stopped
block: simplify string handling in elv_iosched_store()
block: fix kernel-doc for blk_alloc_devt()
block: fix nr_phys_segments miscalculation bug
block: add partition attribute for partition number
block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT
softirq: Add support for triggering softirq work on softirqs.
Linus Torvalds [Fri, 17 Oct 2008 16:09:48 +0000 (09:09 -0700)]
Merge branch 'for-linus' of git://www.jni.nu/cris
* 'for-linus' of git://www.jni.nu/cris:
CRIS: proper defconfig setup
[CRIS] Rename boot-linkscripts and fix the path to them.
Linus Torvalds [Fri, 17 Oct 2008 16:00:23 +0000 (09:00 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
[SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n
libiscsi: fix locking in iscsi_eh_device_reset
libiscsi: check reason why we are stopping iscsi session to determine error value
[SCSI] iscsi_tcp: return a descriptive error value during connection errors
[SCSI] libiscsi: rename host reset to target reset
[SCSI] iscsi class: fix endpoint id handling
[SCSI] libiscsi: Support drivers initiating session removal
[SCSI] libiscsi: fix data corruption when target has to resend data-in packets
[SCSI] sd: Switch kernel printing level for DIF messages
[SCSI] sd: Correctly handle all combinations of DIF and DIX
[SCSI] sd: Always print actual protection_type
[SCSI] sd: Issue correct protection operation
[SCSI] scsi_error: fix target reset handling
[SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events
[SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
[SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted
[SCSI] scsi_dh_alua: remove REQ_NOMERGE
[SCSI] lpfc 8.2.8 : update driver version to 8.2.8
[SCSI] lpfc 8.2.8 : Add MSI-X support
[SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED
...
Linus Torvalds [Fri, 17 Oct 2008 15:58:52 +0000 (08:58 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
ipv4: Add a missing rcu_assign_pointer() in routing cache.
[netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit
xen-netfront: Avoid unaligned accesses to IP header
lmc: copy_*_user under spinlock
[netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
Jean Delvare [Fri, 17 Oct 2008 15:51:20 +0000 (17:51 +0200)]
hwmon: (adm1026) Prevent log spamming
When debugging is enabled, the adm1026 driver currently logs the
message "Setting VID from GPIO11-15" 108 times each time you run
"sensors". Once should be enough.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Philip Pokorny <ppokorny@penguincomputing.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:20 +0000 (17:51 +0200)]
hwmon: (adm1026) Fix debug messages
* Add missing new-line to one debug message.
* Remove leading colon from 3 debug messages.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Philip Pokorny <ppokorny@penguincomputing.com>
Corentin Labbe [Fri, 17 Oct 2008 15:51:20 +0000 (17:51 +0200)]
hwmon: (adm1029) Use mask for fan_div value
This is my patch for testing correct values of fan div in adm1029 and
prevent a division by 0 for some (unlikely) register values.
Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Darrick J. Wong [Fri, 17 Oct 2008 15:51:20 +0000 (17:51 +0200)]
hwmon: (adt7470) Add documentation
Add at least the bare minimum of documentation for this chip.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Darrick J. Wong [Fri, 17 Oct 2008 15:51:19 +0000 (17:51 +0200)]
hwmon: (ibmaem) Automatically load on IBM systems via DMI
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Darrick J. Wong [Fri, 17 Oct 2008 15:51:19 +0000 (17:51 +0200)]
hwmon: (ibmpex) Automatically load on IBM systems via DMI
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfgang Grandegger [Fri, 17 Oct 2008 15:51:19 +0000 (17:51 +0200)]
hwmon: (w83781d) Use new style driver binding
This patch modifies the w83781d driver to use new style driver binding.
Substantial code modifications are required to deal with the new
interface, especially legacy device detection.
[JD: largely edited to make the patch smaller and to get the driver
to work again on ISA devices.]
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:19 +0000 (17:51 +0200)]
hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices
Upcoming changes to the I2C part of the w83781d driver will cause ISA
devices to no longer have a struct i2c_client at hand. So, we must
stop (ab)using it now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Wolfgang Grandegger [Fri, 17 Oct 2008 15:51:18 +0000 (17:51 +0200)]
hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA
Probing the ISA bus on systems without ISA bus may hang the system.
This patch makes the ISA bus related code depend on the kernel
configuration parameter CONFIG_ISA. It moves ISA bus related code
into one #ifdef CONFIG_ISA ... #endif block and adds some helper
function.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:18 +0000 (17:51 +0200)]
hwmon: (w83781d) Additional information about AS99127F PWM
This information was provided in lm-sensors ticket #2350:
http://www.lm-sensors.org/ticket/2350
This is IMHO still not enough to be able to safely implement fan
control support for the AS99127F, but this is valuable information so
I am adding it to the documentation.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:18 +0000 (17:51 +0200)]
hwmon: (w83781d) Detect alias chips
The W83781D and W83782D can be accessed either on the I2C bus or the
ISA bus. We must not access the same chip through both interfaces. So
far we were relying on the user passing the correct ignore parameter
to skip the registration of the I2C interface as suggested by
sensors-detect, but this is fragile: the user may load the w83781d
driver without running sensors-detect, and the i2c bus numbers are
not stable across reboots and hardware changes.
So, better detect alias chips in the driver directly, and skip any
I2C chip which is obviously an alias of the ISA chip. This is done
by comparing the value of 26 selected registers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:18 +0000 (17:51 +0200)]
hwmon: (w83781d) Refactor beep enable handling
We can handle the beep enable bit as any other beep mask bit for
slightly smaller code.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:17 +0000 (17:51 +0200)]
hwmon: Drop dead links to old National Semiconductor chip datasheets
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Marc Hulsman [Fri, 17 Oct 2008 15:51:17 +0000 (17:51 +0200)]
hwmon: (w83791d) add support for thermal cruise mode
Add support to set target temperature and tolerance for thermal
cruise mode.
Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Marc Hulsman [Fri, 17 Oct 2008 15:51:17 +0000 (17:51 +0200)]
hwmon: (w83791d) add pwm_enable support
Add support for pwm_enable.
Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Marc Hulsman [Fri, 17 Oct 2008 15:51:17 +0000 (17:51 +0200)]
hwmon: (w83791d) add manual PWM support
Add PWM manual control.
Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Marc Hulsman [Fri, 17 Oct 2008 15:51:16 +0000 (17:51 +0200)]
hwmon: (w83791d) fan 4/5 pins can also be used for gpio
Pins fan/pwm 4-5 can be in use as GPIO. If that is the case, do not
create their sysfs-interface.
Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Andrew Morton [Fri, 17 Oct 2008 15:51:16 +0000 (17:51 +0200)]
hwmon: (max1619) Use inline functions instead of macros
Macros evaluating their arguments more than once are evil.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:16 +0000 (17:51 +0200)]
hwmon: (it87) Fix thermal sensor type values
The it87 driver doesn't follow the standard sensor type values as
documented in Documentation/hwmon/sysfs-interface. It uses value 2 for
thermistors instead of value 4. This causes "sensors" to tell the user
that the chip is setup for a transistor while it is actually setup for
a thermistor.
Using value 4 for thermistors solves the problem. For compatibility
reasons, we still accept value 2 but emit a warning message so that
users update their configuration files.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:16 +0000 (17:51 +0200)]
hwmon: (lm78) Convert to a new-style i2c driver
The new-style lm78 driver implements the optional detect() callback
to cover the use cases of the legacy driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:15 +0000 (17:51 +0200)]
hwmon: (lm78) Stop abusing struct i2c_client for ISA devices
Upcoming changes to the I2C part of the lm78 driver will cause ISA
devices to no longer have a struct i2c_client at hand. So, we must
stop (ab)using it now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:15 +0000 (17:51 +0200)]
hwmon: (lm78) Prevent misdetection of Winbond chips
The LM78 detection is relatively weak, and sometimes recent Winbond
chips can be misdetected as an LM78. We have had repeated reports of
this happening. We have an explicit check against this for the ISA
access, do the same for I2C access now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:15 +0000 (17:51 +0200)]
hwmon: (lm78) Detect alias chips
The LM78 and LM79 can be accessed either on the I2C bus or the ISA
bus. We must not access the same chip through both interfaces. So far
we were relying on the user passing the correct ignore parameter to
skip the registration of the I2C interface as suggested by
sensors-detect, but this is fragile: the user may load the lm78
driver without running sensors-detect, and the i2c bus numbers are
not stable across reboots and hardware changes.
So, better detect alias chips in the driver directly, and skip any
I2C chip which is obviously an alias of the ISA chip. This is done
by comparing the value of 26 selected registers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:15 +0000 (17:51 +0200)]
hwmon: (lm78) Fix I/O resource conflict with PNP
Only request I/O ports 0x295-0x296 instead of the full I/O address
range. This solves a conflict with PNP resources on a few motherboards.
Also request the I/O ports in two parts (4 low ports, 4 high ports)
during device detection, otherwise the PNP resource make the request
(and thus the detection) fail.
This is the exact same fix that was applied to driver w83781d in
March 2008 to address the same problem:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=
2961cb22ef02850d90e7a12c28a14d74e327df8d
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:14 +0000 (17:51 +0200)]
hwmon: (lm85) Better label names
Label names ERROR1 and ERROR3 aren't exactly explicit. Change them for
better names that indicate what we are up to.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Jean Delvare [Fri, 17 Oct 2008 15:51:14 +0000 (17:51 +0200)]
hwmon: (lm85) Simplify RANGE_TO_REG
Function RANGE_TO_REG can easily be simplified. Credits go to Herbert
Poetzl for indirectly suggesting this to me. I tested that the new
implementation returns the same result as the original implementation
for all input values.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Jean Delvare [Fri, 17 Oct 2008 15:51:14 +0000 (17:51 +0200)]
hwmon: (lm85) Convert to a new-style i2c driver
The new-style lm85 driver implements the optional detect() callback
to cover the use cases of the legacy driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Jean Delvare [Fri, 17 Oct 2008 15:51:14 +0000 (17:51 +0200)]
hwmon: (lm85) Support different PWM frequency tables
The Analog Devices and SMSC devices supported by the lm85 driver do
not have the same PWM frequency table as the National Semiconductor
devices. Add support for per-device frequency tables.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Jean Delvare [Fri, 17 Oct 2008 15:51:13 +0000 (17:51 +0200)]
hwmon: (lm85) Select the closest PWM frequency
The LM85 and compatible chips only support 8 arbitrary PWM frequencies.
The algorithm to pick one of them based on the user input is not
optimum. Improve it to always pick the closest supported frequency.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Jean Delvare [Fri, 17 Oct 2008 15:51:13 +0000 (17:51 +0200)]
hwmon: (lm85) Implement the standard PWM frequency interface
Implement the standard PWM frequency interface: pwm[1-*]_freq in
units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq
in units of 0.1 Hz. The old naming was not only non-standard, it was
also confusing, because it suggested that the frequency value only
applied in automatic fan speed mode, which isn't true.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Jean Delvare [Fri, 17 Oct 2008 15:51:13 +0000 (17:51 +0200)]
hwmon: (lm85) Rework the device detection
Rework the device detection to make it clearer and faster in the
general case (when a known device is found.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Dmitry Torokhov [Fri, 17 Oct 2008 15:51:13 +0000 (17:51 +0200)]
hwmon: (ams) Simplify IRQ handling routine
Simplify the IRQ handling routine of ams driver.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Dmitry Torokhov [Fri, 17 Oct 2008 15:51:12 +0000 (17:51 +0200)]
hwmon: (ams) Fix locking issues
Use a separate mutex to serialize input device creation/removal,
otheriwse we deadlock if we try to remove input device while it is
being polled. Also do not take ams_info.lock when it is not needed.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Dmitry Torokhov [Fri, 17 Oct 2008 15:51:12 +0000 (17:51 +0200)]
hwmon: (ams) Fix permissions on 'joystick' module parameter
We should not allow writes to the 'joystick' module parameters since
writing there will not trigger creation of the input device. Disable
writes since we provide alternative way of enabling input device via
AMS device's sysfs attribute.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:12 +0000 (17:51 +0200)]
hwmon: (ams) Convert to a new-style i2c driver
The legacy i2c binding model is phasing out, so the ams driver needs
to be converted to a new-style i2c driver. Here is a naive approach of
this conversion. Basically it is moving the i2c device creation from
the ams driver to the i2c-powermac driver. This should work, but I
suspect we could come up with something cleaner by declaring the i2c
device as part of the platform setup. This could be done later by
someone more familiar with openfirmware-based platforms than I am
myself.
One nice thing brought by this conversion is that the ams driver
should be loaded automatically on systems where is is needed (at
least when the I2C interface to the chip is used) providing
coldplug-aware user-space environment.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Stelian Pop <stelian@popies.net>
Cc: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Ben Hutchings [Fri, 17 Oct 2008 15:51:12 +0000 (17:51 +0200)]
hwmon: (lm87) Add support for configuration through platform_data
The lm87 driver normally assumes that firmware configured the chip
correctly. Since this is not always the case, alllow platform code to
set the channel register value via platform_data. All other
configuration registers can be changed after driver initialisation.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Ben Hutchings [Fri, 17 Oct 2008 15:51:11 +0000 (17:51 +0200)]
hwmon: (lm87) Restore original configuration register on removal
This means that if we have to start the monitor when probed, we also
stop it on removal.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Ben Hutchings [Fri, 17 Oct 2008 15:51:11 +0000 (17:51 +0200)]
hwmon: (lm87) Fix masking of config register in lm87_init_client()
lm87_init_client() conditionally sets the Start bit and clears the
INT#_Clear bit in the Config 1 register. The condition should be that
either of these bits needs changing, but currently it checks the
(self-clearing) Initialization bit instead of INT#_Clear.
Fix the condition and also ensure we never set the Initialization bit.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 17 Oct 2008 15:51:11 +0000 (17:51 +0200)]
hwmon: (lm90) Don't spam the kernel log
Degrade the "Unsupported chip" message from info to debug level.
There's nothing wrong with this, so no need to bother the user.
Also make the message slightly more descriptive.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Ben Hutchings [Fri, 17 Oct 2008 15:51:11 +0000 (17:51 +0200)]
hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649
These Maxim chips are similar to MAX6657 but use unsigned temperature
values to allow for readings up to 145 degrees.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Ben Hutchings [Fri, 17 Oct 2008 15:51:10 +0000 (17:51 +0200)]
hwmon: (lm90) Rename temperature conversion functions to match usage
The encoding of temperatures varies between chips and modes. So do not
use "temp1" or "temp2" in the names of the conversion functions, but
specify the encoding.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
Nate Case [Fri, 17 Oct 2008 15:51:10 +0000 (17:51 +0200)]
hwmon: (lm90) Support ADT7461 in extended mode
Support ADT7461 in extended temperature range mode, which will change
the range of readings from 0..127 to -64..191 degC. Adjust the
register conversion functions accordingly.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
Nate Case [Fri, 17 Oct 2008 15:51:10 +0000 (17:51 +0200)]
hwmon: (lm90) Convert some macros to static functions
Use static functions instead of the TEMPx_FROM_REG* and TEMPx_TO_REG*
macros. This will ensure type safety and eliminate any side effects
from arguments passed in since the macros referenced 'val' multiple
times. This change should not affect functionality.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:10 +0000 (17:51 +0200)]
hwmon: (lm90) Update datasheet links
Update the links to the datasheet of some of the devices supported by
the lm90 driver. Also remove the links from the driver itself, so that
we don't have to update them twice each time they change.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:09 +0000 (17:51 +0200)]
hwmon: (lm90) Don't access nonexistent registers on Maxim chips
The Maxim chips supported by the lm90 driver have 8-bit high and low
remote limit values, not 11-bit as the other chips have. So stop reading
from and writing to registers that do not exist on these chips. Also
round the limit values set by the user properly.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:09 +0000 (17:51 +0200)]
hwmon: (lm90) Support the extra resolution bits of MAX6657
The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for
the local temperature measurement. Let the lm90 driver read them and
export them to user-space.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Jean Delvare [Fri, 17 Oct 2008 15:51:09 +0000 (17:51 +0200)]
hwmon: (lm90) Move 16-bit value read to a separate function
Move the code which aggregates two 8-bit register values into a 16-bit
value to a separate function. We'll need to do it a second time soon and
I don't want to duplicate the code.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Takashi Iwai [Fri, 17 Oct 2008 15:24:23 +0000 (17:24 +0200)]
Merge branch 'topic/asoc' into for-linus
Zhaolei [Fri, 17 Oct 2008 13:04:55 +0000 (21:04 +0800)]
ALSA: Fix debugfs_create_dir's error checking method for sound/soc/
debugfs_create_dir() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 17 Oct 2008 14:28:20 +0000 (16:28 +0200)]
Merge branches 'topic/asoc', 'topic/hda' and 'topic/misc-fixes' into for-linus
Jens Axboe [Fri, 17 Oct 2008 12:03:08 +0000 (14:03 +0200)]
block: remove __generic_unplug_device() from exports
The only out-of-core user is IDE, and that should be using
blk_start_queueing() instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Peter Zijlstra [Thu, 16 Oct 2008 11:44:57 +0000 (13:44 +0200)]
block: move q->unplug_work initialization
modprobe loop; rmmod loop effectively creates a blk_queue and destroys it
which results in q->unplug_work being canceled without it ever being
initialized.
Therefore, move the initialization of q->unplug_work from
blk_queue_make_request() to blk_alloc_queue*().
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Stefan Raspl [Thu, 16 Oct 2008 06:23:39 +0000 (08:23 +0200)]
blktrace: pass zfcp driver data
This patch writes the channel and fabric latencies in nanoseconds per
request via blktrace for later analysis. The utilization of the inbound
and outbound adapter queue is also reported.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Stefan Raspl [Thu, 16 Oct 2008 06:23:21 +0000 (08:23 +0200)]
blktrace: add support for driver data
This patch adds the new api call blk_add_driver_data() to blktrace.
It allows to trace device driver-specific binary data.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This page took 0.045103 seconds and 5 git commands to generate.