* gdb.base/return2.exp: return of long long and double fails for
68HC11; don't execute these tests on that platform.
* gdb.base/return.exp: Return of a double fails for 68hc11.
Eli Zaretskii [Mon, 16 Jul 2001 14:13:06 +0000 (14:13 +0000)]
* cli/cli-cmds.c (shell_escape) [GLOBAL_CURDIR]: Condition the
call to chdir on this symbol rather than on __DJGPP__.
(CANT_FORK) [__MSDOS__]: Move from here...
* defs.h (CANT_FORK) [__MSDOS__]: ...to here.
(GLOBAL_CURDIR) [__MSDOS__]: Define.
Elena Zannoni [Sun, 15 Jul 2001 20:45:32 +0000 (20:45 +0000)]
2001-07-15 Elena Zannoni <ezannoni@redhat.com>
* top.c (quit_cover, float_handler): Move definition up before use.
(gdb_init): Move to end of file, to avoid calls to not yet defined
functions.
Delete prototypes.
* utils.c (query): Remove tui hacks; tui must use the query_hook.
* top.c (command_loop): Remove tui insert_mode hacks; don't call
tuiCleanUp because this must be made with atexit by tui.
* symfile.c (symbol_file_command): Remove call to TUIDO
* stack.c (show_and_print_stack_frame_stub): Remove tui check;
not necessary when using the selected frame hooks.
(print_stack_frame_stub): Likewise.
(print_frame_info_base): Likewise.
(print_frame_info): Likewise.
(up_silently_command): Likewise.
(down_silently_command): Likewise.
(show_stack_frame): Likewise for TUIDO.
(select_frame): Likewise.
(select_and_print_frame): Likewise.
(stack_publish_stopped_with_no_frame): Remove.
(select_and_maybe_print_frame): Remove.
* main.c (captured_main): Remove tui_fileopen and tuiInit; tui
must use the initialize ui hook.
* infrun.c (normal_stop): Remove call to TUIDO; tui must use the
selected frame hooks.
* event-top.c (command_handler): Remove tui insert_mode hack.
* defs.h: Remove TUIDO; Only include tui.h.
* breakpoint.c (mention): Remove calls to TUIDO.
(delete_breakpoint): Remove tui hacks; tui must install
the breakpoint hooks.
Elena Zannoni [Fri, 13 Jul 2001 20:03:52 +0000 (20:03 +0000)]
2001-07-13 Elena Zannoni <ezannoni@redhat.com>
* remote-e7000.c (fetch_regs_from_dump): If register set is null,
generate an internal error.
(e7000_fetch_registers): Initialize variable 'wanted'.
(e7000_wait): Initialize variable 'wanted_nopc'.
(e7000_store_register): Fix sprintf compiler warnings.
(sub2_from_pc): Ditto.
(e7000_open): Close the descriptor, not the name.
(e7000_load): Fix compiler warnings.
(sub2_from_pc): Ditto.
* Makefile.in (remote-e7000.o): Can now compile with -Werror.
Mark Kettenis [Fri, 13 Jul 2001 18:27:21 +0000 (18:27 +0000)]
* i386bsd-nat.c: Include <signal.h>, <stddef.h> and
<sys/sysctl.h>.
(store_inferior_registers): Wrap long line.
(i386bsd_dr_get_status): Fix typo in comment.
(_initialize_i386bsd_nat): New function. * i386bsd-tdep.c: New
file. * config/i386/tm-fbsd.h (IN_SIGTRAMP): New define.
(i386bsd_in_sigtramp): New prototype.
(SIGTRAMP_START, SIGTRAMP_END): Redefine in terms...
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): ...these new
(external) variables.
(SIGCONTEXT_PC_OFFSET): Removed.
(FRAME_SAVED_PC): New define.
(i386bsd_frame_saved_pc): New function. * config/i386/fbsd.mt
(TDEPFILES): Add i386bsd-tdep.o.
Jeff Johnston [Thu, 12 Jul 2001 21:26:42 +0000 (21:26 +0000)]
2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
* cgen-asm.in: Include "xregex.h" always to enable the libiberty
regex support.
(@arch@_cgen_build_insn_regex): New routine from Graydon.
(@arch@_cgen_assemble_insn): Add Graydon's code to use regex
to verify if it is worth parsing the insn as insn "x". Also update
error message when insn is not a recognized format of the insn vs
when the insn is completely unrecognized.
Mark Kettenis [Thu, 12 Jul 2001 19:37:36 +0000 (19:37 +0000)]
* lin-lwp.c (stop_wait_callback): Add support for flushing
signals. Use that in favour of the old code to get rid of
superfluous SIGINTs.
(lin_lwp_wait): Use the new support in stop_wait_callback to
flush all but one SIGINT.
Mark Kettenis [Thu, 12 Jul 2001 18:22:37 +0000 (18:22 +0000)]
* config/arm/xm-linux.h, config/i386/xm-linux.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
Removed. Taken care of by autoconf and terminal.h.
* some support for funny-endian 16/32-bit insn sets
[cgen/ChangeLog]
2001-07-11 Frank Ch. Eigler <fche@redhat.com>
* desc-cpu.scm (-gen-mach-table-defns): Emit fourth field: the
mach->cpu insn-chunk-bitsize.
(-gen-cpu-open): In @arch@_cgen_rebuild_tables, process above new
field toward CGEN_CPU_TABLE->insn_chunk_bitsize.
* mach.scm (<cpu>): New field insn-chunk-bitsize.
(-cpu-parse, -cpu-read): Parse/initialize it.
* doc/rtl.texi (define-cpu): Document it.
[opcodes/ChangeLog]
2001-07-11 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
bfd_get_bits.
* cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
[include/opcode/ChangeLog]
2001-07-11 Frank Ch. Eigler <fche@redhat.com>
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
H.J. Lu [Wed, 11 Jul 2001 19:03:10 +0000 (19:03 +0000)]
2001-07-11 H.J. Lu <hjl@gnu.org>
* elf64-alpha.c (elf64_alpha_check_relocs): Only use the same
ALLOC|LOAD flags as the source section for debugging sections
when creating the reloc section.
* gdbserver/remote-utils.c (remote_open): Set gdbserver as "owner"
of SIGIO.
(input_interrupt): Don't block on read, in case we got redundant
SIGIO. Don't gripe about redundant SIGIO.
* gdbserver/low-hppabsd.c (mywait): Use waitpid(). Enable SIGIO
handler while waiting.
* gdbserver/low-linux.c (mywait): Likewise.
* gdbserver/low-nbsd.c (mywait): Likewise.
* gdbserver/low-sparc.c (mywait): Likewise.
Eli Zaretskii [Wed, 11 Jul 2001 10:11:31 +0000 (10:11 +0000)]
* go32-nat.c (info_dos_cmdlist): New variable.
(go32_info_dos_command): New function.
(_initialize_go32_nat): Convert all DOS-specific commands into
subcommands of "info dos". Suggested by Andrew Cagney
<ac131313@redhat.com>.
Mark Kettenis [Wed, 11 Jul 2001 09:14:51 +0000 (09:14 +0000)]
* thread-db.c (enable_thread_event_reporting): Correct warning
message about getting thread death breakpoint.
Reported by John S Kallal <jskallal@home.com>.
Mark Kettenis [Wed, 11 Jul 2001 08:43:41 +0000 (08:43 +0000)]
* i386-tdep.c (i386_extract_return_value): "Fix" comment.
(i386_store_return_value): Frob FPU status and tag word to make
sure the return value is the only value on the FPU stack.
Mark Kettenis [Wed, 11 Jul 2001 08:15:36 +0000 (08:15 +0000)]
* config/tm-linux.h: Do not include <signal.h>. Instead provide
reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
already defined.
* config/nm-linux.h: Include <signal.h>.
[__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
(__SIGRTMAX + 1) respectively.
John Healy [Tue, 10 Jul 2001 21:49:11 +0000 (21:49 +0000)]
2001-07-10 John Healy <jhealy@redhat.com>
* config/obj-elf.c (obj_elf_section): md_elf_section_change_data_hook
added to grab section information after it's been extracted from the
.section directive.
Jim Blandy [Tue, 10 Jul 2001 21:24:48 +0000 (21:24 +0000)]
Clean up the D10V port so that GDB and the target program no
longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
Andrew Cagney [Tue, 10 Jul 2001 21:06:34 +0000 (21:06 +0000)]
* remote-utils.h (struct serial): Declare as opaque. Remove
include of "serial.h".
* Makefile.in (remote_utils_h): Update.
* monitor.h (struct serial): Declare as opaque. Remove include of
"serial.h".
(struct monitor_ops): Replace serial_t with `struct serial *'.
* monitor.c (monitor_desc): Ditto.
David O'Brien [Tue, 10 Jul 2001 00:38:16 +0000 (00:38 +0000)]
2001-07-09 David O'Brien <obrien@FreeBSD.org>
* emultempl/elf32.em: Do not assuming that contents of the buffer
returned from basename function will remain unchanged accross other
function calls.
NOTE: DJ Delorie recomends doing a basename()->lbasename() conversion.
Approved by: DJ Delorie
<200107100030.UAA01223@envy.delorie.com>
projects / deliverable / binutils-gdb.git / log
