gas/
    * expr.c (add_to_result, subtract_from_result): Make global.
    * expr.h (add_to_result, subtract_from_result): Add prototypes.
    * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
    subtract_from_result to handle extra bit of precision for .sleb128
    directive operands.

    gas/testsuite/
    * gas/all/gas.exp (sleb128-7): Don't run for tic4x, tic54x.
    * gas/all/sleb128-2.s: Reformat, use _ at start of labels, remove
    cruft.
    * gas/all/sleb128-3.s: Likewise.
    * gas/all/sleb128-4.s: Likewise.
    * gas/all/sleb128-5.s: Likewise.
    * gas/all/sleb128-7.s: Likewise.
    * gas/all/sleb128-2.d: Handle data sections named $DATA$.
    * gas/all/sleb128-3.d: Likewise.
    * gas/all/sleb128-4.d: Likewise.
    * gas/all/sleb128-5.d: Likewise.
    * gas/all/sleb128-7.d: Likewise.

* scripttempl/armbpabi.sc: Replace DWARF sections with an
inclusion of DWARF.sc.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfxgate.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/epiphany_4x4.sc: Likewise.
* scripttempl/i386beos.sc: Likewise.
* scripttempl/i386go32.sc: Likewise.
* scripttempl/ia64vms.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/v850_rh850.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
* scripttempl/DWARF.sc: New.

* Makefile.am ($(MKDOC)): Append $(EXEEXT_FOR_BUILD) to temp file.
* Makefile.in: Regenerate.

* archive.c (_bfd_archive_close_and_cleanup): Clear parent
cache slot for archives.

daily update

*** empty log message ***

* mmo.c (mmo_write_chunk): Break out abfd->tdata.mmo_data to new
local variable mmop.

*** empty log message ***

daily update

gdb/

* ctf.c (_initialize_ctf): Include "completer.h".
Call add_target_with_completer instead of add_target.

gdb/testsuite/

* gdb.base/completion.exp: Test completion of command
'target ctf' if target ctf is supported.

* powerpc.cc (Stub_control::can_add_to_stub_group): Don't set
owner when sections are not adjacent and exceed group size.
(Target_powerpc::group_sections): Handle corner case.
(Target_powerpc::Branch_info::make_stub): Handle case where
stub table doesn't exist due to branches in non-exec sections.
(Target_powerpc::Relocate::relocate): Likewise.

daily update

*** empty log message ***

gdb/doc/
* gdb.texinfo (Auto-loading safe path): Add quick -iex using command
line below the sample output.

Re: "show configuration"/--configuration patch: mention --configuration too.

Clean up "show configuration" entry.

gdb/
Fix GDB regression related to PR binutils/14813.
* jit.c (mem_bfd_iovec_close): Return 0 for success.
* minidebug.c (lzma_close): Add return value comment.
* remote.c (remote_bfd_iovec_close): Return 0 for success.
* solib-spu.c (spu_bfd_iovec_close): Likewise.
* spu-linux-nat.c (spu_bfd_iovec_close): Likewise.

gdb/
* config.in: Regenerate.

* dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
const.
* dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
(struct die_reader_specs) <buffer>: Likewise.
(die_reader_func_ftype): Make 'info_ptr' const.
(struct line_header) <include_dirs, statement_program_start,
statement_program_end>: Now const.
(struct file_entry) <name>: Likewise.
(struct partial_die_info) <sibling>: Likewise.
(struct dwarf_block) <data>: Likewise.
(dwarf2_read_section): Remove cast.
(dwarf2_get_section_info): Make 'bufp' const.
(read_index_from_section): Constify.
(dw2_get_file_names_reader): Make 'info_ptr' const.
(dw2_get_primary_filename_reader): Likewise.
(read_comp_unit_head): Make 'info_ptr' and return type const.
(read_and_check_comp_unit_head, read_and_check_type_unit_head):
Likewise.
(read_abbrev_offset): Constify.
(dwarf2_create_include_psymtab): Make 'name' const.
(create_debug_types_hash_table): Update.
(read_cutu_die_from_dwo): Make 'result_info_ptr' const.
(init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
Constify.
(process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
(load_partial_comp_unit_reader): Make 'info_ptr' const.
(read_comp_units_from_section): Constify.
(peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
(locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
const.
(dwarf2_compute_name, setup_type_unit_groups): Constify.
(create_dwo_debug_info_hash_table): Make 'info_ptr' const.
(create_dwp_hash_table, dwarf2_ranges_read)
(dwarf2_record_block_ranges): Constify.
(read_die_and_children, read_die_and_siblings_1)
(read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
const.
(read_full_die_1, read_full_die): Make 'info_ptr' const.
(abbrev_table_read_table): Constify.
(load_partial_dies): Make 'info_ptr' const.
(read_partial_die, read_attribute_value, read_attribute): Make
'info_ptr' and return type const.
(read_address, read_initial_length)
(read_checked_initial_length_and_offset, read_offset)
(read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
const.
(read_direct_string): Make 'buf' and return type const.
(read_indirect_string_at_offset, read_indirect_string_from_dwz)
(read_indirect_string): Make return type const.
(read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
(read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
'info_ptr' const.
(read_str_index): Make return type const.
(add_include_dir): Make 'include_dir' const.
(add_file_name): Make 'name' const.
(dwarf_decode_line_header): Constify.
(psymtab_include_file_name): Make return type const.
(dwarf_decode_lines_1, dwarf_decode_lines): Constify.
(dwarf2_start_subfile): Make 'filename' const.
(dwarf2_const_value_attr): Make 'bytes' const.
(read_signatured_type_reader): Make 'info_ptr' const.
(decode_locdesc): Constify.
(skip_form_bytes): Make 'bytes', 'buffer_end', and return type
const.
(skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
'mac_end', and return type const.
(dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
(dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
type const.
(per_cu_header_read_in): Constify.
* symfile.h (dwarf2_get_section_info): Update.

* symtab.h (struct general_symbol_info) <value.bytes>: Make const.

NEWS: Document 'show configuration'.

Implement a new command to show GDB build-time configuration parameters.

* top.c (print_gdb_configuration): New function, displays the
details about GDB configure-time parameters.
(print_gdb_version): Mention "show configuration".

* cli/cli-cmds.c (show_configuration): New function.
(_initialize_cli_cmds): Add the "show configuration" command.

* main.c (captured_main) <print_configuration>: New static var.
<long_options>: Use it.
If --configuration was given, call print_gdb_configuration.

* doc/gdb.texinfo (Mode Options): Document '-configuration'.
(Help): Document "show configuration".
(Bug Reporting): Add requirements to include the configuration
details in bug reports.

*** empty log message ***

daily update

gdb/
Fix parsing tabs in ${gdb_target_obs}.
* configure.tgt (gdb_have_gcore): Replace case with for and if.

gdb/
* Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
(generated_files): Add gcore.
(install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
HAVE_NATIVE_GCORE_HOST.
(gcore): New.
* NEWS (Changes since GDB 7.6): Mention newly installed gcore.
* config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
Add HAVE_NATIVE_GCORE_HOST.
* configure: Regenerate.
* configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME.  New
AC_CONFIG_FILES for gcore.
* configure.tgt: Add gdb_have_gcore to the initial comment.  Set
gdb_have_gcore.
* gdb_gcore.sh: Rename to ...
* gcore.in: ... here.  Remove gcore.sh comment.  Use GDB_TRANSFORM_NAME
and GCORE_TRANSFORM_NAME substitutions.

gdb/doc/
* Makefile.in (MAN1S): Add gcore.1.
Remove "Host, target, and site specific Makefile fragments" comment.
(@host_makefile_frag@, HAVE_NATIVE_GCORE_TARGET): New.
(install-man1, uninstall-man1): Conditionalize gcore.1.
(gcore.1): New.
* gdb.texinfo (Man Pages): Add gcore man.
(gcore man): New node.

gdb/
* remote.c (unpush_and_perror): Add output message final dot.

gas/
    * read.c (convert_to_bignum): Add sign parameter. Use it
    instead of X_unsigned to determine sign of resulting bignum.
    (emit_expr): Pass extra argument to convert_to_bignum.
    (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
    X_extrabit to convert_to_bignum.
    (parse_bitfield_cons): Set X_extrabit.
    * expr.c (make_expr_symbol, expr_build_uconstant, operand):
    Initialise X_extrabit field as appropriate.
    (add_to_result): New.
    (subtract_from_result): New.
    (expr): Use above.
    * expr.h (expressionS): Add X_extrabit field.

    gas/testsuite/
    * gas/all/sleb128-2.s: New test.
    * gas/all/sleb128-3.s: Likewise.
    * gas/all/sleb128-4.s: Likewise.
    * gas/all/sleb128-5.s: Likewise.
    * gas/all/sleb128-7.s: Likewise.
    * gas/all/sleb128-2.d: New.
    * gas/all/sleb128-3.d: New.
    * gas/all/sleb123-4.d: New.
    * gas/all/sleb123-5.d: New.
    * gas/all/sleb123-7.d: New.
    * gas/all/gas.exp (sleb128-2, sleb128-3, sleb128-4, sleb128-5)
    (sleb128-7): Run new tests.

gdb/

* tracepoint.c (tfile_interp_line): Fit parameters line and
utpp in one line.

PR gold/15354
* powerpc.cc (Target_powerpc::make_brlt_section): Name section
.branch_lt to match bfd ld.  Adjust comments throughout file.

Do not overwrite so_list's so_name in solib_map_sections

gdb/ChangeLog:

        * solib.c (solib_map_sections): Remove code overwriting
        SO->SO_NAME with the bfd's filename.

*** empty log message ***

daily update

opcodes/
* rl78-dis.c (print_insn_rl78): Use alternative form as a GCC false
warning workaround.

Accept "set foo unlimited" in integer/uinteger/zuinteger_unlimited commands.

Currently, several commands take "0" or "-1" to mean "unlimited".

"show" knows when to print "unlimited":

 (gdb) show height
 Number of lines gdb thinks are in a page is 45.
 (gdb) set height 0
 (gdb) show height
 Number of lines gdb thinks are in a page is unlimited.

However, the user can't herself specify "unlimited" directly:

 (gdb) set height unlimited
 No symbol table is loaded.  Use the "file" command.
 (gdb)

This patch addresses that, by adjusting the set handler for all
integer/uinteger/zuinteger_unlimited commands to accept literal
"unlimited".  It also installs a completer.  Presently, we complete on
symbols by default, and at
<http://sourceware.org/ml/gdb-patches/2013-03/msg00864.html> I've
shown a WIP prototype that tried to keep that half working in these
commands.  In the end, it turned out to be more complicated than
justifiable, IMO.  It's super rare to want to pass the value of a
variable/symbol in the program to a GDB set/show knob.  That'll still
work, it's just that we won't assist with completion anymore.  This
patch just sticks with the simple, and completes on "unlimited", and
nothing else.  This simplification means that

  "set he<tab><tab>"

is all it takes to get to:

  "set height unlimited"

The patch then goes through all integer/uinteger/zuinteger_unlimited
commands in the tree, and updates both the online help and the manual
to mention that "unlimited" is accepted in addition to 0/-1.  In the
cases where the command had no online help text at all, this adds it.
I've tried to make the texts read in a way that "unlimited" is
suggested before "0" or "-1" is.

Tested on x86_64 Fedora 17.

gdb/
2013-04-10  Pedro Alves  <palves@redhat.com>

* cli/cli-decode.c (integer_unlimited_completer): New function.
(add_setshow_integer_cmd, add_setshow_uinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
completer.
* cli/cli-setshow.c: Include "cli/cli-utils.h".
(is_unlimited_literal): New function.
(do_set_command): Handle literal "unlimited" arguments.
* frame.c (_initialize_frame) <set backtrace limit>: Document
"unlimited".
* printcmd.c (_initialize_printcmd) <set print
max-symbolic-offset>: Add help text.
* record-full.c (_initialize_record_full) <set record full
insn-number-max>: Likewise.
* record.c (_initialize_record) <set record
instruction-history-size, set record function-call-history-size>:
Add help text.
* ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
help text.
* tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
Likewise.
* source.c (_initialize_source) <set listsize>: Add help text.
* utils.c (initialize_utils) <set height, set width>: Likewise.
<set pagination>: Mention "set height unlimited".
* valprint.c (_initialize_valprint) <set print elements, set print
repeats>: Document "unlimited".

gdb/doc/
2013-04-10  Pedro Alves  <palves@redhat.com>

* gdb.texinfo (Process Record and Replay): Document that "set
record full insn-number-max", "set record
instruction-history-size" and "set record
function-call-history-size" accept "unlimited".
(Backtrace): Document that "set backtrace limit" accepts
"unlimited".
(List): Document that "set listsize" accepts "unlimited".
(Print Settings)" Document that "set print max-symbolic-offset",
"set print elements" and "set print repeats" accept "unlimited".
(Starting and Stopping Trace Experiments): Document that "set
trace-buffer-size" accepts "unlimited".
(Remote Configuration): Document that "set tcp connect-timeout"
accepts "unlimited".
(Command History): Document that "set history size" accepts
"unlimited".
(Screen Size): Document that "set height" and "set width" accepts
"unlimited".  Adjust "set pagination"'s description to suggest
"set height unlimited" instead of "set height 0".

gdb/testsuite/
2013-04-10  Pedro Alves  <palves@redhat.com>

* gdb.base/completion.exp: Test "set height", "set listsize" and
"set trace-buffer-size" completion.
* gdb.base/setshow.exp: Test "set height unlimited".
* gdb.trace/trace-buffer-size.exp: Test "set trace-buffer-size
unlimited".

make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit"

Gareth mentions in PR gdb/15275:

 "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing()
 and therefore exits correctly."

It should, so to get out of tfind mode, as quit may detach instead of
kill, and we don't want to confuse the memory/register accesses
etc. of the detach process.  So we should push down the disconnect
tracing bits at least to quit_force.  But we can't as is, as that
would swallow the error thrown by answering "no" to:

  Trace is running but will stop on detach; detach anyway? (y or n)

So to address that, we split disconnect_tracing in two.  One part that
does the query, and another part that does the rest, and we make
quit_force call the latter.

Looking at quit_force, it does several things, some of which are a bit
independent of the others.  It first kills/detaches, and then writes
history, and then runs the final cleanups.  It seems better to me to
do each of these things even if the previous thing throws.  E.g., as
is, if something throws while detaching, then we skip writing history.

Tested on x86_64 Fedora 17.

gdb/
2013-04-10  Pedro Alves  <palves@redhat.com>

* cli/cli-cmds.c (quit_command): Call query_if_trace_running
instead of disconnect_tracing.
* infcmd.c (detach_command, disconnect_command): Call
query_if_trace_running.  Adjust.
* top.c: Include "tracepoint.h".
(quit_target): Delete.  Contents moved ...
(quit_force): ... here.  Wrap each stage of teardown in
TRY_CATCH.  Call disconnect_tracing before detaching.

gas/
2013-04-10  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
register being PC when is_t or writeback, and use distinct
diagnostic for the latter case.

gas/testsuite/
2013-04-10  Jan Beulich <jbeulich@suse.com>

* gas/testsuite/gas/arm/ldst-pc.s: Add index, non-writeback
forms of various loads and stores with PC as base.
* gas/testsuite/gas/arm/ldst-pc.d: Update accordingly.

gas/
2013-04-10  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (parse_operands): Re-write
po_barrier_or_imm().
(do_barrier): Remove bogus constraint().
(do_t_barrier): Remove.

gas/testsuite/
2013-04-10  Jan Beulich <jbeulich@suse.com>

* gas/arm/barrier-bad.d: Change title.
* gas/arm/barrier-bad.s: Add immediate form of ISB and DSB as
well as one symbolic form of DSB.
* gas/arm/barrier-bad.l: Update accordingly.
* gas/arm/barrier-bad-thumb.d: Adjust title. Use barrier-bad.s as
source. Pass -mthumb to gas.
* gas/arm/barrier-bad-thumb.l: Remove.
* gas/arm/barrier-bad-thumb.s: Remove.
* gas/arm/barrier-thumb.d: Adjust title. Use barrier.s as source.
Pass -mthumb to gas.
* gas/arm/barrier-thumb.s: Remove.

2013-04-10  Venkataramanan Kumar  <venkataramanan.kumar@linaro.org>
        * ld-aarch64/gc-plt1.s: New file.
        * ld-aarch64/gc-plt2.s: Likewise.
        * ld-aarch64/gc-plt-hidden.s: Likewise.
        * ld-aarch64/gc-plt-main.s: Likewise.
        * ld-aarch64/gc-relocs-257.s: Likewise.
        * ld-aarch64/gc-plt-relocs.d: Update expected objdump.
        * ld-aarch64/gc-relocs-257.d: Likewise.
        * ld-aarch64/gc-relocs-257-dyn.d: Likewise.
        * ld-aarch64/aarch64-elf.exp: Add test.

gdb/

2013-04-10  Hui Zhu  <hui@codesourcery.com>
    Yao Qi  <yao@codesourcery.com>

* configure.ac: Check libbabeltrace is installed.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in (LIBBABELTRACE): New.
(CLIBS): Add LIBBABELTRACE.
* ctf.c: Include "exec.h".
(CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
(CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
(ctf_save_metadata_header): Define new type aliases in
metadata.
(ctf_write_header): Define event type "tsv_def" and "tp_def"
in metadata.  Start a new faked packet for trace status.
(ctf_write_status): Write trace status to CTF.
(ctf_write_uploaded_tsv): Write TSV to CTF.
(ctf_write_uploaded_tp): Write tracepoint definition to CTF.
(ctf_write_definition_end): End the faked packet.

(ctx, ctf_iter, trace_dirname): New.
(start_pos): New variable.
(ctf_destroy, ctf_open_dir, ctf_open): New.
(SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
macros.
(ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
(ctf_fetch_registers, ctf_xfer_partial): New.
(ctf_get_trace_state_variable_value): New.
(ctf_get_tpnum_from_frame_event): New.
(ctf_get_traceframe_address): New.
(ctf_trace_find, ctf_has_stack): New.
(ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
(ctf_get_trace_status, ctf_read_status): New.
(_initialize_ctf): New.
* tracepoint.c (get_tracepoint_number): New
(get_uploaded_tsv): Remove 'static'.
  (struct traceframe_info, trace_regblock_size): Move it to ...
* tracepoint.h: ... here.
(get_tracepoint_number): Declare it.
(get_uploaded_tsv): Declare it.

* NEWS: Mention new configure option.

gdb/doc/

2013-04-10  Yao Qi  <yao@codesourcery.com>

* gdb.texinfo (Trace Files): Add "target ctf".

gdb/testsuite/

2013-04-10  Yao Qi  <yao@codesourcery.com>

* gdb.trace/actions.exp: Save trace data to CTF.
Change to ctf target if GDB supports, read CTF data in ctf
target, and check the actions of tracepoints.
* gdb.trace/while-stepping.exp: Likewise.
* gdb.trace/report.exp: Test GDB saves trace data to CTF
format and read CTF trace file if GDB supports.
* gdb.trace/tstatus.exp: Save trace data to CTF.  If ctf
target is supported, change to ctf target, read trace data and
check output of command "tstatus".
* gdb.trace/tsv.exp: Save trace frame to CTF.  If GDB supports,
read CTF data by target ctf and call check_tsv.

gdb/testsuite/

* gdb.trace/actions.exp (check_tracepoint): New.
(top level): Start the tracing and check the actions of
tracepoints.  Save trace data to tfile format.  Restart GDB
and read trace file in tfile target.  Check the actions of
tracepoints again.
* gdb.trace/while-stepping.exp: Likewise.

gdb/testsuite/

* gdb.trace/report.exp: Use standard_output_file for saved
trace file.

2013-04-10  Pedro Alves  <palves@redhat.com>
    Hui Zhu  <hui@codesourcery.com>

* breakpoint.c (dprintf_re_set): New.
(initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
to dprintf_re_set.

2013-04-10  Hui Zhu  <hui@codesourcery.com>

* gdb.base/Makefile.in (EXECUTABLES): Add dprintf-pending.
(MISCELLANEOUS): Add dprintf-pendshr.sl.
* gdb.base/dprintf-pending.c, gdb.base/dprintf-pending.exp: New.

Remove solib-svr4.o from gdb_target_obs for ppc-aix.

gdb/ChangeLog:

        * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
        Remove solib-svr4.o from the list.

daily update

*** empty log message ***

Fix build failure in varobj.c:update_dynamic_varobj_children...

... when !HAVE_PYTHON.

gdb/ChangeLog:

        * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
        Use gdb_assert_not_reached instead of invalid boolean expression.

PR ld/12494
* bfd/elf32-avr.c: Consider all sections to determine if linker
relaxation can safely delete a ret after a call/jmp

* gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
ATmega2564RFR2
* gas/doc/c-avr.texi (-mmcu documentation): Likewise.

gdb/testsuite/
* gdb.server/server-kill.exp (tstatus): Permit also ECONNRESET
response.

  * bfd.c (typedef bfd, Error reporting, Miscellaneous): Add INODEs.

        * bfd.texinfo (typedef bfd, Error reporting, Miscellaneous):
        Add menu items.

Avoid potencially-stale errno usage.

The current throw_perror_with_name/TARGET_CLOSE_ERROR calls assume
errno is still set to the right error, although remote_unpush_target
is called in between, which may well change errno.

Tested on x86_64 Fedora 17 w/ gdbserver.

gdb/
2013-04-09  Pedro Alves  <palves@redhat.com>

* remote.c (unpush_and_perror): New function.
(readchar, remote_serial_write): Use it.

gas/
2013-04-09  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (do_vmrs): Accept all control registers.
Use local variable Rt in more places.
(do_vmsr): Accept all control registers.

gas/testsuite/
2013-04-09  Jan Beulich <jbeulich@suse.com>

* gas/arm/vfp1xD.s: Add VMRS/VMSR tests with FPINST, FPINST2,
and C15.
* gas/arm/vfp1xD.d: Update accordingly.

gas/
2013-04-09  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
if there was none specified for moves between scalar and core
register.

gas/testsuite/
2013-04-09  Jan Beulich <jbeulich@suse.com>

* gas/arm/neon-omit.s: Add tests for suffix less VMOV.
* gas/arm/neon-omit.d: Update accordingly.

gas/
2013-04-09  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
NEON_ALL_LANES case.

gas/testsuite/
2013-04-09  Jan Beulich <jbeulich@suse.com>

* gas/arm/neon-addressing-bad.s: Add test for further invalid VST
operands.
* gas/arm/neon-addressing-bad.l: Update accordingly.

gdb/
* NEWS: Mention new btrace RSP packets.

* symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
long.

daily update

*** empty log message ***

* maint.c (print_bfd_section_info): Print the section index.
* symmisc.c (dump_msymbols): Print the section index.

PR symtab/8424:
* blockframe.c (find_pc_partial_function_gnu_ifunc): Check
SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
* breakpoint.c (resolve_sal_pc): Update.
* elfread.c (elf_gnu_ifunc_record_cache): Update.
* findvar.c (struct minsym_lookup_data) <objfile>: New field.
(minsym_lookup_iterator_cb): Use it.
(default_read_var_value): Update.
* hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
Update.
* infcmd.c (jump_command): Update.
* linespec.c (minsym_found): Update.
* maint.c (maintenance_translate_address): Update.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
(prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
* parse.c (write_exp_msymbol): Update.
* printcmd.c (address_info): Update.
* psymtab.c (find_pc_sect_psymbol): Update.
(fixup_psymbol_section): Check SYMBOL_SECTION, not
SYMBOL_OBJ_SECTION.
(add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
Don't initialize SYMBOL_OBJ_SECTION.
* spu-tdep.c (spu_catch_start): Update.
* stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
* symmisc.c (dump_msymbols, print_symbol): Update.
* symtab.c (fixup_section): Don't set 'obj_section'.  Change
how fallback section is computed.
(fixup_symbol_section): Update.
(find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
Update.
(allocate_symbol, initialize_symbol, allocate_template_symbol):
Initialize SYMBOL_SECTION.
* symtab.h (struct general_symbol_info) <section>: Update comment.
<obj_section>: Remove.
(SYMBOL_OBJ_SECTION): Add 'objfile' argument.  Rewrite.
(SYMBOL_OBJFILE): New macro.

* coffread.c (record_minimal_symbol): Update.
* dbxread.c (record_minimal_symbol): Update.
* elfread.c (record_minimal_symbol): Update.
* machoread.c (macho_symtab_add_minsym): Update.
* mdebugread.c (record_minimal_symbol, parse_partial_symbols):
Update.
* minsyms.c (prim_record_minimal_symbol): Update.
(prim_record_minimal_symbol_full): Remove 'bfd_section'
argument.
(prim_record_minimal_symbol_and_info): Likewise.
* minsyms.h (prim_record_minimal_symbol_full)
(prim_record_minimal_symbol_and_info): Update.
* symtab.c (allocate_symbol, initialize_symbol)
(allocate_template_symbol): Initialize SYMBOL_SECTION.
* xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
Update.

PR symtab/8423:
* solib-som.c (som_solib_section_offsets): Use BFD section
indices.  Set offsets for all sections.
* somread.c (som_symtab_read): Compute BFD section for
symbol.  Use prim_record_minimal_symbol_and_info.
(som_symfile_read): Fix comment.
(struct find_section_offset_arg): New.
(find_section_offset, set_section_index): New functions.
(som_symfile_offsets): Use set_section_index to compute
section indices.
bfd/
* som.c (bfd_section_from_som_symbol): No longer static.
* som.h (bfd_section_from_som_symbol): Declare.

* coffread.c (cs_to_section): Use gdb_bfd_section_index.
* elfread.c (record_minimal_symbol, elf_symtab_read): Use
gdb_bfd_section_index.
* gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
New functions.
* gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
Declare.
* machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
Update.
* objfiles.c (add_to_objfile_sections_full): New function.
(add_to_objfile_sections): Use it.
(build_section_table): Rewrite.
(objfile_relocate1): Use gdb_bfd_section_index.  Update.
* objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
(struct objfile) <sections>: Update comment.
(ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
is NULL.
(ALL_OBJSECTIONS): Use it.
* solib-dsbt.c (dsbt_relocate_main_executable): Update.
* solib-frv.c (frv_relocate_main_executable): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Use gdb_bfd_section_index.
* symfile.c (build_section_addr_info_from_section_table):
Use gdb_bfd_section_index.
(build_section_addr_info_from_bfd, place_section): Likewise.
* symtab.c (fixup_section): Update.
* xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.

* minsyms.h (struct bound_minimal_symbol): New.
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
Remove objfile argument.
(lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
Return bound_minimal_symbol.
* minsyms.c (lookup_minimal_symbol_by_pc_1)
(lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
Return bound_minimal_symbol.
(in_gnu_ifunc_stub): Update.
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
Remove 'objfile_p' argument.
(lookup_solib_trampoline_symbol_by_pc): Update.
* ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
stack.c, symtab.c, tui/tui-disasm.c: Update.

* ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
Use symbol's obstack, not an objfile.
* coffread.c (process_coff_symbol): Update.
* dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
* jv-lang.c (add_class_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (prim_record_minimal_symbol_full)
(terminate_minimal_symbol_table): Update.
* psymtab.c (add_psymbol_to_bcache): Clear entire symbol.  Update.
* stabsread.c (define_symbol, read_enum_type): Update.
* symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
Handle Ada specially.
(symbol_set_language): Add 'obstack' argument.
(symbol_set_names): Update.
(symbol_natural_name, symbol_demangled_name): Always use
ada_decode_symbol.
* symtab.h (struct general_symbol_info)
<language_specific::obstack>: New field.
<ada_mangled>: New field.
(SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
(symbol_set_language): Update.

* symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
Take an obstack, not an objfile.
(symbol_set_names): Update.
* symtab.h (symbol_set_demangled_name): Update.

* coffread.c (process_coff_symbol, coff_read_enum_type): Call
allocate_symbol.
* dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
(read_func_scope): Call allocate_template_symbol.
(new_symbol_full): Call allocate_symbol.
* jit.c (finalize_symtab): Call allocate_symbol.
* jv-lang.c (add_class_symbol): Call allocate_symbol.
* mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
* stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
(common_block_end): Call allocate_symbol.
* symtab.c (allocate_symbol, initialize_symbol)
(allocate_template_symbol): New functions.
* symtab.c (allocate_symbol, initialize_symbol)
(allocate_template_symbol): Declare.
* xcoffread.c (process_xcoff_symbol): Call initialize_symbol.

gas/testsuite/
2013-04-08  Jan Beulich <jbeulich@suse.com>

* gas/i386/x86-64-opcode.s: Flesh out LOOP and J*CXZ sections.
Correct comments in Jcc section.
* gas/i386/x86-64-opcode.d: Refresh.
* gas/i386/ilp32/x86-64-opcode.d: Refresh.

opcodes/
2013-04-08  Jan Beulich <jbeulich@suse.com>

* i386-opc.tbl: Fold 64-bit and non-64-bit jecxz entries.
* i386-tbl.h: Re-generate.

* dwarf.c (process_debug_info): Check dwarf_cutoff_level.

* dwarf-mode.el: Bump version number.
(dwarf-mode): Remove autoload.
(dwarf-die-reference): Relax regexp.

create_breapoint / explicit mode: Error out if there's garbage after the breakpoint location.

If !PARSE_CONDITION_AND_THREAD, then ARG is just the location, nothing
else.  The fact that the describing comment of create_breakpoint
doesn't mention this just looks like an oversight of when extra_string
was added.  "parse_condition_and_thread" has been a misnomer ever
since extra_string was added -- better rename it avoid more confusion.
This makes it "parse_arg", as that'll remain stable even if/when more
explicit parameters are added.

gdb/
2013-04-08  Pedro Alves  <palves@redhat.com>
    Keith Seitz  <keiths@redhat.com>

* breakpoint.c (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg".  Update
describing comment.  If !PARSE_ARG, then error out if ARG is not
the empty string after extracting the location.
* breakpoint.h (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg".

gdb/testsuite/
2013-04-08  Pedro Alves  <palves@redhat.com>

* gdb.mi/mi-break.exp (test_error): Add tests with garbage after
the location.

Add const to lm_addr_check.

* solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.

gas/
2013-04-08  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
PC-relative VSTR.

gas/
2013-04-08  Jan Beulich <jbeulich@suse.com>

* gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
entry to sp_fiq.

Handle big-endian for some aarch64 tests

2013-04-08  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

* ld-aarch64/gc-tls-relocs.d: Handle big endian format.
* ld-aarch64/gc-got-relocs.d: Likewise.

daily update

*** empty log message ***

gdb/
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.

gdb/doc/
* Makefile.in (gdb.1, gdbserver.1, gdbinit.5): Use $(srcdir).

gdb/doc/
* Makefile.in (install-man1, install-man5, uninstall-man1)
(uninstall-man5): Replace $(MANS) by $(MAN1S) and $(MAN5S) respectively.

gdb/gdbserver/
* Makefile.in (install-only): Fix make install regression.

daily update

*** empty log message ***

Increase the accuracy of sparc instruction aliases.

Make current with UA2011 specification.

Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.

For 'lzd':

Add 'lzcnt' as primary instruction, and make 'lzd' an alias.

Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':

The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers.  Mark the latter now as aliases.

For 'flush':

Support "[address]" syntax as well as plain "address".

Rework 'mov' aliases for 'wr':

Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.

Add missing cbcond aliases:

c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu

Add 'd' suffix VIS logical ops:

The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example.  And thus 'fzero' is now an alias.

Add modern opcodes for condition code setting edge instructions:

They are now edgeN{,l}cc instead of plain edgeN{,l}.

Add modern opcodes for VIS comparisons:

All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.

The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.

Update existing test cases as needed, and add several new ones.

include/opcode/

* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.

opcodes/

* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops.  Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases.  Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases.  Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.

gas/testsuite/

* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.

gdb/doc/
* Makefile.in (POD2MAN1, POD2MAN5): Replace $(VERSION) by ../version.in.

gdb/doc/
* gdb.texinfo (gdbserver man): Rename tty to comm.  Swap --attach
parameters order.  Remove "On some targets" for --attach.  Document the
--multi parameter and extended-remote command.  Document all the
options.

Unbreak Windows-hosted cross debugger builds.

* windows-nat.c (windows_get_absolute_argv0): Move from here...
* mingw-hdep.c (windows_get_absolute_argv0): ...to here.
Include main.h.

* windows-nat.h (windows_get_absolute_argv0): Move prototype from
here...
* main.h (windows_get_absolute_argv0): ...to here.

* elf32-ppc.c (ppc_elf_check_relocs): Use SYMBOLIC_BIND.
* elf64-ppc.c (ppc64_elf_check_relocs, dec_dynrel_count): Likewise.

*** empty log message ***

daily update

* dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
(read_cutu_die_from_dwo): Add comments.
(read_structure_type): Update comment.
(read_enumeration_type, read_namespace_type): Update comment.
(read_die_type, get_die_type_at_offset, get_die_type): Update comment.

gdb/doc/
* gdb.texinfo (gdb man): Mention option -p.  Include Fortran to
the list of supported languages.

gdb/
Convert man pages to texinfo, new gdbinit.5 texinfo page.
* Makefile.in (gdb.z): Remove.
(install-only): Remove $(man1dir) and gdb.1 installation.
* gdb.1: Remove.

gdb/gdbserver/
Convert man pages to texinfo, new gdbinit.5 texinfo page.
* Makefile.in (install-only): Remove $(man1dir) and gdbserver.1
installation.
* gdbserver.1: Remove.

gdb/doc/
Convert man pages to texinfo, new gdbinit.5 texinfo page.
* Makefile.in (mandir, man1dir, man5dir, SYSTEM_GDBINIT, MANCONF,
(TEXI2POD, POD2MAN1, POD2MAN5, MAN1S, MAN5S, MANS, man): New.
(diststuff): Add man.
(install-man, install-man1, install-man5, uninstall-man, uninstall-man1)
(uninstall-man5): New.
(STAGESTUFF): Add *.1 and *.5.
(GDBvn.texi): Add SYSTEM_GDBINIT.
(gdb.1, gdbserver.1, gdbinit.5): New.
(maintainer-clean realclean): Add $(MANS).
(install): Add install-man.
(uninstall): Add uninstall-man.
* gdb.texinfo (@include gdb-cfg.texi): Wrap it by @c man begin INCLUDE.
(@copying): Wrap it by @c man begin COPYRIGHT.
(Top): Add Man Pages.
(Man Pages, gdb man, gdbserver man, gdbinit man): New.

gdb/
Fix compatibility with Linux kernel 3.8.3.
* linux-tdep.c (linux_find_memory_regions_full): Move variable number
to more inner block.  Remove parsing of NUMBER from outer block.
Parse NUMBER only if KEYWORD has been identified.

gdb/
Fix variable name shadowing.
* linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
filename to mapsfilename and update its uses.

Avoid warning in "make tags".

* Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
empty.  See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
details of the problem.

* elflink.c (elf_link_add_object_symbols): Revert accidental commit.

PR binutils/15324
* configure.in: Add strnlen to AC_CHECK_DECLS, sort.
* dwarf.c (strnlen): Provide fallback decl.
* config.in: Regnerate.
* configure: Regenerate.

*** empty log message ***