Russell King [Fri, 4 Dec 2009 17:33:54 +0000 (17:33 +0000)]
Merge branch 'for-rmk' of git://git.fluff.org/bjdooks/linux into devel-stable
Conflicts:
arch/arm/Kconfig
Mark Brown [Fri, 27 Nov 2009 16:43:54 +0000 (16:43 +0000)]
ARM: S3C6410: Correct names of IISv4 data output pin definitions
The naming of the defines suggests that there are three IISv4 ports
with one data line each when in fact there is a single IISv4 port
with three data lines.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 3 Dec 2009 21:53:10 +0000 (21:53 +0000)]
ARM: Merge next-s3c64xx-updates
Merge branch 'next-s3c64xx-updates' into for-rmk
Conflicts:
arch/arm/plat-s3c/dev-hsmmc2.c
arch/arm/plat-s3c/include/plat/sdhci.h
Ben Dooks [Thu, 3 Dec 2009 21:33:01 +0000 (21:33 +0000)]
ARM: Merge next-s3c24xx-dev-rtp
Merge branch 'next-s3c24xx-dev-rtp' into for-rmk
Conflicts:
arch/arm/mach-s3c2440/mach-anubis.c
Ben Dooks [Thu, 3 Dec 2009 21:31:20 +0000 (21:31 +0000)]
ARM: Merge next-s3c24xx-simtec
Merge branch 'next-s3c24xx-simtec' into for-rmk
Russell King [Tue, 1 Dec 2009 18:22:54 +0000 (18:22 +0000)]
Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable
Maurus Cuelenaere [Mon, 23 Nov 2009 12:34:46 +0000 (13:34 +0100)]
ARM: S3C64XX: add HSMMC2 support
This adds support for the third SDHCI controller.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Fri, 20 Nov 2009 12:04:13 +0000 (13:04 +0100)]
ARM: S3C64XX: add support for all group 0 external interrupts
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Fri, 20 Nov 2009 12:04:08 +0000 (13:04 +0100)]
ARM: S3C64XX: fix USB OTG compilation
This adds the S3C_VA_USB_HSPHY mapping.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Tue, 3 Nov 2009 14:42:12 +0000 (14:42 +0000)]
ARM: S3C64XX: Redo voltage ranges for cpufreq
The documentation for the S3C6410 CPU voltage scaling is rather
unclear, with omitted values for several speed settings. Originally
the code was using only quoted values, resulting in some fairly odd
settings. The S3C6410 is also unusual in that the both the maximum
and minimum voltages quoted scale as the frequency rises, rather
than just the minimum voltage.
Clean this up a bit by always using the specified typical settings
as the minimum voltage (ignoring any specified minimum voltage) in
order to avoid running near the edge of the processor capabilities.
Also use the next quoted maximum voltages rather than the typical
voltages where no maximum voltage is quoted, allowing operation on
a greater range of systems.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Tue, 3 Nov 2009 14:42:11 +0000 (14:42 +0000)]
ARM: S3C64XX: Separate out regulator and frequency latencies
Currently the transition latency reported by the S3C64xx cpufreq
driver includes both the time for the CPU to reclock itself and
the time for a regulator to change voltage. This means that if
a regulator is not in use then the transition latency reported
is excessively high.
In future the regulator API will be extended to report latencies
so the driver will be able to query the performance of a given
regulator.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Tue, 3 Nov 2009 14:42:07 +0000 (14:42 +0000)]
ARM: S3C64XX: Provide logging when CPU frequencies are eliminated due to clocks
This provides symmetry with the voltage based checks done for the
regulator.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Tue, 3 Nov 2009 14:42:06 +0000 (14:42 +0000)]
ARM: SMDK6410: Hook up regulator supplies for WM8580
DVDD is supplied by supplies derived from the PMIC, AVDD and PVDD are
supplied from the main wall supply on the base board which runs at
5V. No option is currently supported for running without a PMIC card,
the assumption is that the regulator API will be built out when no
soft PMIC card is in use.
To ease merge issues since this uses the newly added dev_name supply
configuration from the regulator API (currently in -next only) the
fixed voltage regulator is ifdefed out when the regulator API is not
enabled.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
arnaud.patard@rtp-net.org [Tue, 17 Nov 2009 13:54:59 +0000 (14:54 +0100)]
ARM: H1940: Convert h1940 bluetooth driver to rfkill
Better using standard interfaces to enable/disable bluetooth
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
arnaud.patard@rtp-net.org [Tue, 17 Nov 2009 13:54:58 +0000 (14:54 +0100)]
ARM: H1940: add lcd/backlight device definition
Add lcd and backlight device definition. The pwm backlight stuff does
not allow to really set maximum pwm as with my custom driver but it's
better to use standard driver instead of out of tree driver.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
[ben-linux@fluff.org: tidy header]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
arnaud.patard@rtp-net.org [Tue, 17 Nov 2009 13:54:57 +0000 (14:54 +0100)]
ARM: H1940: enable rtc
Enable S3C2410 rtc on h1940
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
[ben-linux@fluff.org: tidy header]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
arnaud.patard@rtp-net.org [Tue, 17 Nov 2009 13:54:56 +0000 (14:54 +0100)]
ARM: H1940: add mmc device
Add mmc host support to h1940
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
[ben-linux@fluff.org: tidy description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 28 Sep 2009 15:29:48 +0000 (16:29 +0100)]
ARM: N30: Use s3c_i2c0_set_platdata() to set I2C platform data
Fix mach-n30.c to use the s3c_i2c0_set_platdata() call to register the
platform data with the system to get rid of any reliance on having a real
device structure available in memory.
Since s3c_i2c0_set_platdata() copies the data, mark the original as
__initdata so it is thrown away.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 28 Sep 2009 15:20:32 +0000 (16:20 +0100)]
ARM: AT2440EVB: Remove duplicated s3c_device_sdi.name set
The AT2440EVB should not be changing the s3c_device_sdi.name as this is
part of the initialisation process done by the CPU detection process
and actually present in arch/arm/plat-s3c24xx/s3c24xx.c.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 28 Sep 2009 10:59:49 +0000 (13:59 +0300)]
ARM: S3C: Add NAND device platform data set call
Ben Dooks [Mon, 28 Sep 2009 03:45:47 +0000 (12:45 +0900)]
ARM: H1940: Correct name of the local platform devices for LED and Bluetooth
The mach-h1940.c file was using s3c_device_ where it really should be
calling these local definitions h1940_device to ensure they are not
mistaken for real s3c_devices when the device change is done.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 13 Nov 2009 22:54:14 +0000 (22:54 +0000)]
ARM: S3C: Update Simtec copyright statements from , to - [2]
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are not consecutive. However, referencing [1] it
is the correct thing to replace these with A-B or A-C as apropriate.
[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
section 4iii 'Year of publication'
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 13 Nov 2009 22:54:13 +0000 (22:54 +0000)]
ARM: S3C: Update Simtec copyright statements from , to -
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are consecutive. Tidy these up to be A-B or A-C
as appropriate and to comply better with copyright standards [1]
[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
section 4iii 'Year of publication'
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 13 Nov 2009 22:54:12 +0000 (22:54 +0000)]
ARM: S3C: Fix Simtec copyright statements in Documentation/S3C24XX
The (c) alone is not a sufficient copyright statement, nor is it a
good replacement for the proper encircled © symbol [1]. Add the
word copyright to the apropriate places and remove the (c) symbol.
[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
section 4 'What does a notice consist of?'
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 13 Nov 2009 22:34:22 +0000 (22:34 +0000)]
ARM: S3C24XX: Add documentation for arch/arm/plat-s3c24xx/include/plat/mci.h
Add documentation for the platform data structure in the SD/MMC driver
header file arch/arm/plat-s3c24xx/include/plat/mci.h.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 13 Nov 2009 22:34:21 +0000 (22:34 +0000)]
ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.
Add a driver to provide DVS for the Simtec Osiris module to reduce
the power consumption whilst idling.
The DVS driver alters the voltage supplied to the ARM core depending
on the frequency it is running at. The driver itself does not do any
of the frequency alteration, which is left up to the cpufreq driver.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 13 Nov 2009 22:34:20 +0000 (22:34 +0000)]
ARM: S3C24XX: machine support for Simtec Audio
Add the platform/machine support for the audio devices fitted to
the Simtec range of boards since the move to ASoC.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:24 +0000 (08:41 +0100)]
SMDKC100: add SDHCI controllers 0, 1 and 2 support
Add required machine definitions for SDHCI controller 0, 1 and 2. SMDKC100
has 2 SDHCI/MMC ports. Port 1 is directly connected to controller 0. Port
1 can be conntected to controler 1 or 2, depending on jumper setup.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:23 +0000 (08:41 +0100)]
ARM: S5PC1xx: add platform helpers for SDHCI host controllers
Samsung S5PC100 has 3 SDHCI controllers compatible with the one known from
previous SoCs series. Add required platform setup and support code that
the devices can be used with sdhci-s3c driver.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:22 +0000 (08:41 +0100)]
SMDKC100: add I2C0 and I2C1 buses support
Add required machine definitions for I2C 0 and 1 bus controllers.
Currently no I2C device are defined yet.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:21 +0000 (08:41 +0100)]
ARM: S5PC1xx: add platform helpers for i2c adapter devices
Samsung S5PC100 has I2C bus controller compatible with the one known from
previous SoCs series. Add required platform setup and support code that
it can be used with s3c2410-i2c driver.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:20 +0000 (08:41 +0100)]
SMDKC100: enable S3C FrameBuffer
Add required machine definitions for s3c-fb device.
A 800x480 lcd device (simmilar to the one known from SMDK6410 boards) has
been defined. The lcd controller is attached to GPIO lines and can be
enabled/disabled with platform-lcd driver.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Pawel Osciak [Tue, 17 Nov 2009 07:41:19 +0000 (08:41 +0100)]
ARM: S5PC1xx: add platform helpers for s3c-fb device
Samsung S5PC100 has LCD-controller compatible with the one known from
previous SoCs series. Add required platform setup and support code that
it can be used with s3c-fb driver.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Pawel Osciak [Tue, 17 Nov 2009 07:41:18 +0000 (08:41 +0100)]
ARM: S3C: Prepare s3c64xx-specific s3c-fb register definition for reuse
S5PC1xx Samsung SOC series has very similar frame buffer hardware, so a lot
of the code can be shared. Moved s3c64xx-specific s3c-fb register
definitions from mach-s3c6400 to common platform directory as regs-fb-v4.h.
The new v4 file will be common for S3C6400, S3C6410, S5PC100 and possibly
others. Some s3c64xx series specific defines (palette handling) were left
in s3c-6400/mach/regs-fb.h, because it is handled differently in S5PC1xx
series.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:17 +0000 (08:41 +0100)]
ARM: S5PC1XX: add cpu idle and system reset support
Add CPU idle support by a call to SoC build-in power management core.
Add system reset support by a simple write to system controll register.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:16 +0000 (08:41 +0100)]
ARM: S5PC1xx: add gpiolib and external/gpio interrupt support
Add support for gpiolib calls. This is based on the gpiolib implementation
from plat-s3c64xx tree.
Add support for external interrupts for GPIO H banks.
Add support for GPIO interrupts for all banks.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:15 +0000 (08:41 +0100)]
ARM: S5PC1XX: GPIO registers rename
S5PC100 and S5PC110 GPIO registers differs in many places, rename all
previously defined registers to be S5PC100 specific.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:14 +0000 (08:41 +0100)]
ARM: S5PC1XX: add GPIO L banks to register definition
Add GPIO L0-L4 banks to register definition.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:13 +0000 (08:41 +0100)]
ARM: S5PC1XX: clocks reimplementation
Clocks hierarchy has been completely reimplemented to match the S5PC100
specification.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:12 +0000 (08:41 +0100)]
ARM: S5PC1XX: clock registers rename
S5PC100 and S5PC110 clock registers differs in many places, rename all
previously defined registers to be S5PC100 specific. Remove all power
management registers. They will be added later to a separate file.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kyungmin Park [Tue, 17 Nov 2009 07:41:11 +0000 (08:41 +0100)]
ARM: S5PC1XX: registers rename
S5PC110 and S5PC100 register maps differs in many places, rename all
defined registers to be S5PC100 specific. PA_SYS register known from
S3C64XX series has been renamed to more adequate PA_CLK. Also system map
has been also updated to cover more integrated peripherals.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Tue, 10 Nov 2009 00:14:58 +0000 (00:14 +0000)]
ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves
We inted to re-organise the plat-s3c/plat-s3c24xx/plat-s3c64xx into a
more generic plat-samsung with less code in the other plat- directories
to make it easier to port new devices and try and clear up some of the
naming issues with newer devices.
Start by creating a small arch/arm/plat-samsung with no actuall code in
so we can move items in as we process them.
Add this to arch/arm to allow it to build things once support is added.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Saeed Bishara [Tue, 24 Nov 2009 17:33:53 +0000 (19:33 +0200)]
RTC: let Dove soc select the rtc-mv driver.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Lennert Buytenhek [Tue, 24 Nov 2009 17:33:52 +0000 (19:33 +0200)]
ARM: Add Tauros2 L2 cache controller support
Support for the Tauros2 L2 cache controller as used with the PJ1
and PJ4 CPUs.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Saeed Bishara [Thu, 6 Aug 2009 12:12:43 +0000 (15:12 +0300)]
ARM: add base support for Marvell Dove SoC
The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Uwe Kleine-König [Thu, 26 Nov 2009 11:55:19 +0000 (11:55 +0000)]
ARM: fix "offest" -> "offset" typo
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 24 Nov 2009 10:00:10 +0000 (10:00 +0000)]
Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Sascha Hauer [Wed, 18 Nov 2009 14:21:44 +0000 (15:21 +0100)]
mxc: mx1/mx2 DMA: add a possibility to create an endless DMA transfer
This is useful for audio where we do not want to setup a new scatterlist
after playing 4GB of audio data. This would cause skips in the playback.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 12 Nov 2009 13:09:39 +0000 (14:09 +0100)]
i.MX31 clock: rename SSI clocks to driver name
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 29 Oct 2009 16:18:02 +0000 (17:18 +0100)]
mxc: iomux v3: remove resource handling
The current model does not allow to put a pad into different modes
once a pins is allocated. Remove the resource handling.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 12 Nov 2009 13:02:22 +0000 (14:02 +0100)]
mx3: Add SSI pins to iomux table
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Mon, 23 Nov 2009 18:16:37 +0000 (19:16 +0100)]
mx31moboard: support for usbh1 and usbh2
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Mon, 23 Nov 2009 18:16:36 +0000 (19:16 +0100)]
mx31moboard: SPI corrections
Adds requirement for ADC on mc13783 and moves the spidev declaration
to marxbot file.
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Mon, 23 Nov 2009 18:16:35 +0000 (19:16 +0100)]
mx31: pins used for mx31moboard USB
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Nelson Elhage [Fri, 2 Oct 2009 20:32:47 +0000 (16:32 -0400)]
ARM: Clean up linker script using new linker script macros.
This patch is mostly a straightforward translation. The primary side
effect to the resulting vmlinux should be to increase the alignment on
the initramfs to the standard PAGE_SIZE from 32 bytes.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tim Abbott [Fri, 2 Oct 2009 20:32:46 +0000 (16:32 -0400)]
ARM: convert to use __HEAD and HEAD_TEXT macros.
This has the consequence of changing the section name used for head
code from ".text.head" to ".head.text". Since this commit changes all
users in the architecture, this change should be harmless.
The .text.head output section is eliminated and the head text code is
included at the start of the .init output section.
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Daniel Mack [Sat, 21 Nov 2009 19:17:18 +0000 (20:17 +0100)]
ARM: MX3: fix CPU revision number detection
The macro mx31_revision() used to take the global variable system_rev to
determine the CPU revision number. However, this number is expected to
be set by the bootloader and is usually zero (at least on my MX31 based
boards here). More than that, it is usually taken to identify the
board's revision, not the CPU's.
Fix that by reading the the CPU's SREV register instead.
Right now, mx31_read_cpu_rev() is called from mx31_clocks_init() which
is admittedly not a good place for it. However, we need to enable the
IIM clock first, and the clock code also has conditional code that
depends on mx31_revision() returning the right thing.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Sat, 21 Nov 2009 17:40:40 +0000 (18:40 +0100)]
ARM: MX3: lilly1131: move MC13783 device registration
Register the MC13783 device in the module code.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Russell King [Fri, 20 Nov 2009 23:53:11 +0000 (23:53 +0000)]
Merge branch 'next' of git://git./linux/kernel/git/djbw/xscaleiop into devel-stable
Russell King [Fri, 20 Nov 2009 17:51:21 +0000 (17:51 +0000)]
Merge branch 'for-rmk' of git://github.com/at91linux/linux-2.6-at91 into devel-stable
Conflicts:
arch/arm/mach-at91/Kconfig
Russell King [Fri, 20 Nov 2009 13:07:57 +0000 (13:07 +0000)]
ARM: PNX4008: fix watchdog device driver name
The PNX core code calls the device 'pnx4008-watchdog' not 'watchdog'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Russell King [Wed, 18 Nov 2009 18:03:19 +0000 (18:03 +0000)]
[ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled
d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to
always be defined. Solve this by providing invalid definitions for
these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Fri, 20 Nov 2009 04:29:34 +0000 (20:29 -0800)]
Merge branch 'i2c-pnx-fixes' of git://git.fluff.org/bjdooks/linux
* 'i2c-pnx-fixes' of git://git.fluff.org/bjdooks/linux:
i2c: i2c-pnx: Added missing mach/i2c.h and linux/io.h header file includes
i2c: i2c-pnx: Made buf type unsigned to prevent sign extension
i2c: i2c-pnx: Limit minimum jiffie timeout to 2
Linus Torvalds [Fri, 20 Nov 2009 04:29:05 +0000 (20:29 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Trivial cleanup of jbd compatibility layer removal
ocfs2: Refresh documentation
ocfs2: return f_fsid info in ocfs2_statfs()
ocfs2: duplicate inline data properly during reflink.
ocfs2: Move ocfs2_complete_reflink to the right place.
ocfs2: Return -EINVAL when a device is not ocfs2.
Kevin Wells [Wed, 11 Nov 2009 23:25:52 +0000 (00:25 +0100)]
i2c: i2c-pnx: Added missing mach/i2c.h and linux/io.h header file includes
Added missing mach/i2c.h and linux/io.h header file includes
Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kevin Wells [Wed, 11 Nov 2009 23:23:00 +0000 (00:23 +0100)]
i2c: i2c-pnx: Made buf type unsigned to prevent sign extension
Made buf type unsigned to prevent sign extension
Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kevin Wells [Wed, 11 Nov 2009 23:28:13 +0000 (00:28 +0100)]
i2c: i2c-pnx: Limit minimum jiffie timeout to 2
Limit minimum jiffie timeout to 2 to prevent early timeout on systems
with low tick rates
Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Torvalds [Thu, 19 Nov 2009 22:32:38 +0000 (14:32 -0800)]
Linux 2.6.32-rc8
Linus Torvalds [Thu, 19 Nov 2009 21:43:19 +0000 (13:43 -0800)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
SUNRPC: Address buffer overrun in rpc_uaddr2sockaddr()
NFSv4: Fix a cache validation bug which causes getcwd() to return ENOENT
Alan Cox [Thu, 19 Nov 2009 13:30:36 +0000 (13:30 +0000)]
vt: Fix use of "new" in a struct field
As this struct is exposed to user space and the API was added for this
release it's a bit of a pain for the C++ world and we still have time to
fix it. Rename the fields before we end up with that pain in an actual
release.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Olivier Goffart
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Woodhouse [Thu, 19 Nov 2009 02:18:44 +0000 (02:18 +0000)]
Fix handling of the HP/Acer 'DMAR at zero' BIOS error for machines with <4GiB RAM.
Commit
86cf898e1d0fca245173980e3897580db38569a8 ("intel-iommu: Check for
'DMAR at zero' BIOS error earlier.") was supposed to work by pretending
not to detect an IOMMU if it was actually being reported by the BIOS at
physical address zero.
However, the intel_iommu_init() function is called unconditionally, as
are the corresponding functions for other IOMMU hardware.
So the patch only worked if you have RAM above the 4GiB boundary. It
caused swiotlb to be initialised when no IOMMU was detected during early
boot, and thus the later IOMMU init would refuse to run.
But if you have less RAM than that, swiotlb wouldn't get set up and the
IOMMU _would_ still end up being initialised, even though we never
claimed to detect it.
This patch also sets the dmar_disabled flag when the error is detected
during the initial detection phase -- so that the later call to
intel_iommu_init() will return without doing anything, regardless of
whether swiotlb is used or not.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Mack [Thu, 19 Nov 2009 11:02:11 +0000 (12:02 +0100)]
ARM: MX3: add NOR flash support via physmap mtd driver
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 19 Nov 2009 11:02:10 +0000 (12:02 +0100)]
ARM: MX3: add support for GPIO LEDs on litekit db
The names are chosen to match the silkscreen.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 19 Nov 2009 11:02:09 +0000 (12:02 +0100)]
ARM: MX3: add USB functions for mx31litekit
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 19 Nov 2009 11:02:08 +0000 (12:02 +0100)]
ARM: MX3: add SPI devices for mx31lite
Some header files were reordered while I was at it.
The only device currently registered is the ATLAS PMIC (MC13783) chip.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 19 Nov 2009 11:02:07 +0000 (12:02 +0100)]
ARM: MX3: add MMC/SDHC support to mx31lite-db.c
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 19 Nov 2009 11:02:06 +0000 (12:02 +0100)]
ARM: MX3: modularize 'mx31lite' code
This commit splits the support code for LogicPD's mx31lite hardware
into module and board specific parts.
This introduces a new mandatory coreparam called 'mx31lite_baseboard'
which specifies the base board support to use. For now, only the LiteKit
development board is supported, and developers of own boards are
encouraged to use that as reference.
The UART support moved to the board code.
Some comments were amended along the way.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linus Torvalds [Thu, 19 Nov 2009 02:49:49 +0000 (18:49 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Fix stale cpufreq_cpu_governor pointer
[CPUFREQ] Resolve time unit thinko in ondemand/conservative govs
[CPUFREQ] speedstep-ich: fix error caused by
394122ab144dae4b276d74644a2f11c44a60ac5c
[CPUFREQ] Fix use after free on governor restore
[CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in notification message
[CPUFREQ] powernow-k8: Fix test in get_transition_latency()
[CPUFREQ] longhaul: select Longhaul version 2 for capable CPUs
Linus Torvalds [Wed, 18 Nov 2009 21:31:52 +0000 (22:31 +0100)]
strcmp: fix overflow and possibly signedness error
Doing the strcmp return value as
signed char __res = *cs - *ct;
is wrong for two reasons. The subtraction can overflow because __res
doesn't use a type big enough. Moreover the compared bytes should be
interpreted as unsigned char as specified by POSIX.
The same problem is fixed in strncmp.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 19 Nov 2009 01:08:16 +0000 (17:08 -0800)]
Merge branch 'agp-fixes' of git://git./linux/kernel/git/airlied/agp-2.6
* 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge()
Linus Torvalds [Thu, 19 Nov 2009 00:58:34 +0000 (16:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
ima: replace GFP_KERNEL with GFP_NOFS
David Woodhouse [Wed, 18 Nov 2009 10:22:46 +0000 (10:22 +0000)]
agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge()
We should set this before calling agp_add_bridge() so that it's done
before we map the scratch page too.
This should probably fix the regression reported as k.o. bug #14627.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 18 Nov 2009 23:00:21 +0000 (15:00 -0800)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
OMAP: cs should be positive in gpmc_cs_free()
omap: fix unlikely(x) < y
omap3: clock: Fixed dpll3_m2x2 rate calculation
omap3: clock: Fix the DPLL freqsel computations
omap: Fix keymap for zoom2 according to matrix keypad framwork
Linus Torvalds [Wed, 18 Nov 2009 22:59:49 +0000 (14:59 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: tlv320aic23 fix rate selection
ASoC: OMAP3 Pandora: update for TWL4030 codec changes
ASoC: Modifying the license string GPLv2 for OMAP3 EVM
ALSA: hda - Fix quirk for VAIO type G
ALSA: usb - Quirk to disable master volume control in PCM2702
Linus Torvalds [Wed, 18 Nov 2009 22:54:45 +0000 (14:54 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
cxgb3: fix premature page unmap
ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts
vlan: Fix register_vlan_dev() error path
gro: Fix illegal merging of trailer trash
sungem: Fix Serdes detection.
net: fix mdio section mismatch warning
ppp: fix BUG on non-linear SKB (multilink receive)
ixgbe: Fixing EEH handler to handle more than one error
net: Fix the rollback test in dev_change_name()
Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation."
TI Davinci EMAC : Fix Console Hang when bringing the interface down
smsc911x: Fix Console Hang when bringing the interface down.
mISDN: fix error return in HFCmulti_init()
forcedeth: mac address fix
r6040: fix version printing
Bluetooth: Fix regression with L2CAP configuration in Basic Mode
Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET
Bluetooth: Set general bonding security for ACL by default
r8169: Fix receive buffer length when MTU is between 1515 and 1536
can: add the missing netlink get_xstats_size callback
...
Mimi Zohar [Wed, 18 Nov 2009 21:16:06 +0000 (16:16 -0500)]
ima: replace GFP_KERNEL with GFP_NOFS
While running fsstress tests on the NFSv4 mounted ext3 and ext4
filesystem, the following call trace was generated on the nfs
server machine.
Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a
potential deadlock.
=================================
[ INFO: inconsistent lock state ]
2.6.31-31.el6.x86_64 #1
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes:
(jbd2_handle){+.+.?.}, at: [<
ffffffff811edd5e>] jbd2_journal_start+0xfe/0x13f
{RECLAIM_FS-ON-W} state was registered at:
[<
ffffffff81091e40>] mark_held_locks+0x65/0x99
[<
ffffffff81091f31>] lockdep_trace_alloc+0xbd/0xf5
[<
ffffffff81126fdd>] kmem_cache_alloc+0x40/0x185
[<
ffffffff812344d7>] ima_iint_insert+0x3d/0xf1
[<
ffffffff812345b0>] ima_inode_alloc+0x25/0x44
[<
ffffffff811484ac>] inode_init_always+0xec/0x271
[<
ffffffff81148682>] alloc_inode+0x51/0xa1
[<
ffffffff81148700>] new_inode+0x2e/0x94
[<
ffffffff811b2f08>] ext4_new_inode+0xb8/0xdc9
[<
ffffffff811be611>] ext4_create+0xcf/0x175
[<
ffffffff8113e2cd>] vfs_create+0x82/0xb8
[<
ffffffff8113f337>] do_filp_open+0x32c/0x9ee
[<
ffffffff811309b9>] do_sys_open+0x6c/0x12c
[<
ffffffff81130adc>] sys_open+0x2e/0x44
[<
ffffffff81011e42>] system_call_fastpath+0x16/0x1b
[<
ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 90371
hardirqs last enabled at (90371): [<
ffffffff8112708d>]
kmem_cache_alloc+0xf0/0x185
hardirqs last disabled at (90370): [<
ffffffff81127026>]
kmem_cache_alloc+0x89/0x185
softirqs last enabled at (89492): [<
ffffffff81068ecf>]
__do_softirq+0x1bf/0x1eb
softirqs last disabled at (89477): [<
ffffffff8101312c>] call_softirq+0x1c/0x30
other info that might help us debug this:
2 locks held by kswapd2/75:
#0: (shrinker_rwsem){++++..}, at: [<
ffffffff810f98ba>] shrink_slab+0x44/0x177
#1: (&type->s_umount_key#25){++++..}, at: [<
ffffffff811450ba>]
Reported-by: Muni P. Beerakam <mbeeraka@in.ibm.com>
Reported-by: Amit K. Arora <amitarora@in.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Roel Kluin [Tue, 17 Nov 2009 22:39:06 +0000 (14:39 -0800)]
OMAP: cs should be positive in gpmc_cs_free()
The index `cs' is signed, test whether it is negative before we release
gpmc_cs_mem[cs].
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Roel Kluin [Tue, 17 Nov 2009 22:39:03 +0000 (14:39 -0800)]
omap: fix unlikely(x) < y
The closing parenthesis was not in the right location.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Takashi Iwai [Wed, 18 Nov 2009 15:38:58 +0000 (16:38 +0100)]
Merge branch 'fix/asoc' into for-linus
Takashi Iwai [Wed, 18 Nov 2009 15:38:49 +0000 (16:38 +0100)]
Merge branch 'fix/hda' into for-linus
Linus Torvalds [Wed, 18 Nov 2009 15:38:19 +0000 (07:38 -0800)]
Merge branch 'sh/for-2.6.32' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fixup last users of irq_chip->typename
uio: pm_runtime_disable is needed if failed
Linus Torvalds [Wed, 18 Nov 2009 15:37:51 +0000 (07:37 -0800)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: option.c: add support for D-Link DWM-162-U5
USB: usbmon: fix bug in mon_buff_area_shrink
USB: xhci: Fix scratchpad deallocation.
USB: xhci: Fix TRB physical to virtual address translation.
USB: xhci: Fix bug memory free after failed initialization.
USB: cdc_acm: Fix memory leak after hangup
USB: cdc_acm: Fix race condition when opening tty
USB: ohci: quirk AMD prefetch for USB 1.1 ISO transfer
Linus Torvalds [Wed, 18 Nov 2009 15:37:38 +0000 (07:37 -0800)]
Merge git://git./linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
tty: cp210x: Fix carrier handling
tty_port: If we are opened non blocking we still need to raise the carrier
Troy Kisky [Tue, 17 Nov 2009 20:51:01 +0000 (13:51 -0700)]
ASoC: tlv320aic23 fix rate selection
Fix the ordering of sr_valid_mask array.
The lower bit of the index represents USB
not bosr.
Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grazvydas Ignotas [Sat, 7 Nov 2009 21:16:12 +0000 (23:16 +0200)]
ASoC: OMAP3 Pandora: update for TWL4030 codec changes
A while ago TWL4030 had it's playback stream name changed, but
pandora needs it for it's playback path. Update to correct stream
name so that playback works again.
Also mark VIBRA output as not connected.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Anuj Aggarwal [Tue, 17 Nov 2009 16:13:42 +0000 (21:43 +0530)]
ASoC: Modifying the license string GPLv2 for OMAP3 EVM
Correcting the license string from GPLv2 -> GPL v2.
Found the problem while building OMAP3 ASoC driver as
module.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Divy Le Ray [Tue, 17 Nov 2009 16:38:28 +0000 (16:38 +0000)]
cxgb3: fix premature page unmap
unmap Rx page only when guaranteed that this page won't be
used anymore to allocate rx page chunks.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Mitchell [Tue, 17 Nov 2009 14:56:55 +0000 (14:56 +0000)]
ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts
The TRT bit shifts were reversed for EMAC4 and non-EMAC4 during the
port from ibm_emac to ibm_newemac. This patch corrects that error.
Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
Acked-by: Feng Kan <fkan@appliedmicro.com>
Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Fri, 13 Nov 2009 20:25:01 +0000 (21:25 +0100)]
imx: copy constants from mx3x.h to mx35.h using the appropriate namespace
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Fri, 13 Nov 2009 20:24:48 +0000 (21:24 +0100)]
imx: copy constants from mx3x.h to mx31.h using the appropriate namespace
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This page took 0.045529 seconds and 5 git commands to generate.