bfd/
* elf32-i386.c (elf_i386_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(elf_i386_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf32-ppc.c (ppc_elf_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(ppc_elf_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf-vxworks.c (elf_vxworks_create_dynamic_sections): New function.
* elf-vxworks.h (elf_vxworks_create_dynamic_sections): Declare.
ld/testsuite/
* ld-i386/ld-i386/vxworks1-lib.nd: New test.
* ld-i386/i386.exp: Run it.
* ld-powerpc/ld-powerpc/vxworks1-lib.nd: New test.
* ld-powerpc/powerc.exp: Run it.
bfd/
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
Randolph Chung [Wed, 1 Mar 2006 05:43:03 +0000 (05:43 +0000)]
2006-03-01 Randolph Chung <tausq@debian.org>
* hppa-tdep.h (unwind_table_entry): Update field names to match HP
runtime specification.
* hppa-tdep.c (internalize_unwinds, hppa_frame_cache): Likewise.
(unwind_command): Likewise.
Randolph Chung [Wed, 1 Mar 2006 05:19:13 +0000 (05:19 +0000)]
2006-03-01 Randolph Chung <tausq@debian.org>
* hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Use
TDEP->is_elf to determine if we are working with a SOM binary.
(null_symtab_and_line): Remove unused variable.
* config/pa/hppa64.mt: Use tm-hppa.h.
* config/pa/tm-hppa64.h: Remove file.
Nick Clifton [Tue, 28 Feb 2006 16:09:01 +0000 (16:09 +0000)]
* objcopy.c (use_alt_mach_code): Change type to unsigned long.
(copy_object): If bfd_alt_mach_code fails emit a more helpful message
and if the target architecture is ELF use the alternative as replacement
value for the e_machine number.
(copy_main): Use strtoul to parse the number provided with the
--alt-mach-code switch.
* doc/binutils.texi (--alt-mach-code): Document that this switch can now
set the absolute e_machine value.
Jan Beulich [Tue, 28 Feb 2006 07:55:36 +0000 (07:55 +0000)]
gas/
2006-02-28 Jan Beulich <jbeulich@novell.com>
PR/1070
* macro.c (getstring): Don't treat parentheses special anymore.
(get_any_string): Don't consider '(' and ')' as quoting anymore.
Special-case '(', ')', '[', and ']' when dealing with non-quoting
characters.
gas/testsuite/
2006-02-28 Jan Beulich <jbeulich@novell.com>
* gas/macros/paren[sd]: New.
* gas/macros/macros.exp: Run new test.
Carlos O'Donell [Mon, 27 Feb 2006 16:26:26 +0000 (16:26 +0000)]
bfd/doc/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add html target.
* Makefile.in: Regenerate.
bfd/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add html target.
binutils/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add html target.
gas/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* doc/Makefile.am: Add html target.
* doc/Makefile.in: Regenerate.
* po/Make-in: Add html target.
gprof/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add html target.
ld/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add html target.
* Makefile.in: Regenerate.
* po/Make-in: Add html target.
opcodes/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add html target.
etc/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: TEXI2HTML uses makeinfo. Define
HTMLFILES. Add html targets.
* configure.texi: Use ifnottex. Add alternative
image format specifier as jpg.
* standards.texi: Use ifnottex.
intl/
2006-10-14 Carlos O'Donell <carlos@codesourcery.com>
* i386.h (i386_optab): Support Intel Merom New Instructions.
opcodes/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
Intel Merom New Instructions.
(THREE_BYTE_0): Likewise.
(THREE_BYTE_1): Likewise.
(three_byte_table): Likewise.
(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
THREE_BYTE_1 for entry 0x3a.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(print_insn): Handle 3-byte opcodes used by Intel Merom New
Instructions.
David S. Miller [Sat, 25 Feb 2006 01:36:12 +0000 (01:36 +0000)]
2006-02-24 David S. Miller <davem@sunset.davemloft.net>
* gas/sparc/rdhpr.s: New test.
* gas/sparc/rdhpr.d: New test.
* gas/sparc/wrhpr.s: New test.
* gas/sparc/wrhpr.d: New test.
* gas/sparc/window.s: New test.
* gas/sparc/window.d: New test.
* gas/sparc/rdpr.s: Add case for reading %gl register.
* gas/sparc/rdpr.d: Likewise.
* gas/sparc/wrpr.s: Add case for writing %gl register.
* gas/sparc/wrpr.d: Likewise.
* gas/sparc/sparc.exp: Update for new tests.
David S. Miller [Sat, 25 Feb 2006 01:34:09 +0000 (01:34 +0000)]
2006-02-24 David S. Miller <davem@sunset.davemloft.net>
* config/tc-sparc.c (priv_reg_table): Add entry for "gl".
(hpriv_reg_table): New table for hyperprivileged registers.
(sparc_ip): New cases '$' and '%' for wrhpr/rdhpr hyperprivileged
register encoding.
David S. Miller [Sat, 25 Feb 2006 01:33:24 +0000 (01:33 +0000)]
2006-02-24 David S. Miller <davem@sunset.davemloft.net>
* sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
(v9_hpriv_reg_names): New table.
(print_insn_sparc): Allow values up to 16 for '?' and '!'.
New cases '$' and '%' for read/write hyperprivileged register.
* sparc-opc.c (sparc_opcodes): Add new entries for UA2005
window handling and rdhpr/wrhpr instructions.
[gas]
* config/tc-m32c.h (md_apply_fix): Define to m32c_apply_fix.
(tc_gen_reloc): Don't define.
* config/tc-m32c.c (rl_for, relaxable): New convenience macros.
(OPTION_LINKRELAX): New.
(md_longopts): Add it.
(m32c_relax): New.
(md_parse_options): Set it.
(md_assemble): Emit relaxation relocs as needed.
(md_convert_frag): Emit relaxation relocs as needed.
(md_cgen_lookup_reloc): Add LAB_8_8 and LAB_8_16.
(m32c_apply_fix): New.
(tc_gen_reloc): New.
(m32c_force_relocation): Force out jump relocs when relaxing.
(m32c_fix_adjustable): Return false if relaxing.
[bfd]
* elf32-m32c.c (m32c_elf_howto_table): Add relaxation relocs.
(m32c_elf_relocate_section): Don't relocate them.
(compare_reloc): New.
(relax_reloc): Remove.
(m32c_offset_for_reloc): New.
(m16c_addr_encodings): New.
(m16c_jmpaddr_encodings): New.
(m32c_addr_encodings): New.
(m32c_elf_relax_section): Relax jumps and address displacements.
(m32c_elf_relax_delete_bytes): Adjust for internal syms. Fix up
short jumps.
Wu Zhou [Fri, 24 Feb 2006 07:26:10 +0000 (07:26 +0000)]
* f-exp.y: Symbol '%' is not used as the modulus operator in
Fortran. Delete this from Fortran expression.
It is now used by Fortran 90 and later to access the member
of derived type. Add this into Fortran expression.
* f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT.
Print each elements in the derived type.
* f-typeprint.c (print_equivalent_f77_float_type): Add a parameter
level into the function definition to do indented printing. And
call fprintfi_filtered instead to do indented printing.
(f_type_print_base): Replace fprintf_filtered with the indented
version (fprintfi_filtered).
(f_type_print_base): Call indented print_equivalent_f77_float_type.
(f_type_print_base): Add code to handle TYPE_CODE_STRUCT. Print
the definition of the derived type.
Mark Kettenis [Tue, 21 Feb 2006 21:02:25 +0000 (21:02 +0000)]
* configure.ac: Introduce ---enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror.
* configure regenerate.
Andrew Stubbs [Tue, 21 Feb 2006 19:46:48 +0000 (19:46 +0000)]
2006-02-21 Andrew Stubbs <andrew.stubbs@st.com>
* defs.h (directory_switch): Add prototype.
* main.c (captured_main): Use directory_switch() instead of
directory_command() to add directories from the -d switch.
* source.c (directory_switch): New function.
(add_path): Use buildargv() to parse spaces in filenames properly.
Strip multiple trailing '/' rather than just one.
Andrew Stubbs [Tue, 21 Feb 2006 19:13:20 +0000 (19:13 +0000)]
2006-02-21 Andrew Stubbs <andrew.stubbs@st.com>
* symfile.c (add_symbol_file_command): Use buildargv(), instead of
hand decoding the command line, to allow use of quotes and spaces.
(_initialize_symfile): Reorganize the help message for add-symbol-file
such that 'help files' shows a better message.
Andrew Stubbs [Tue, 21 Feb 2006 18:22:27 +0000 (18:22 +0000)]
2006-02-21 Andrew Stubbs <andrew.stubbs@st.com>
* symfile.c (generic_load): Use buildargv() and tilde_expand()
to parse file names with quoting, spaces and tildes properly.
(load_command): Quote all special characters before calling
target_load() such that buildargv() doesn't break file names.
(_initialize_symfile): Mention the load offset in the help for
the load command.
* remote-sim.c: Include readline.h.
(gdbsim_load): Use buildargv and tilde_expand() to parse file
names with quoting, spaces and tildes properly.
* target.h (target_load): Comment the parameters better.
* Makefile.in (remote_sim.o): Add readline.h dependency.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* win32_nat.c (cygwin_load_start): New variable.
(cygwin_load_end): Ditto.
(have_saved_context): Ditto.
(saved_context): Ditto.
(max_dll_name_len): Delete obsolete variable.
(do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll if we
are in a cygwin signal rather than a windows signal.
(solib_symbols_add): Detect and store beginning and end of cygwin DLL if dll
being loaded is the cygwin DLL.
(register_loaded_dll): Remove calculation of max_dll_name_len.
(win32_clear_solib): Ditto.
(handle_load_dll): Delete obsolete variable. Remove unneeded call to
solib_add.
(handle_output_debug_string): Detect and store signal information sent by
Cygwin here.
(handle_exception): Silently pass on errors in the cygwin DLL. Return -1 on
first pass exception.
(win32_continue): Remove spurious clearing of continue_status.
(get_win32_debug_event): Deal differently first chance exception.
Fred Fish [Sun, 19 Feb 2006 20:53:34 +0000 (20:53 +0000)]
Reviewed and approved by Daniel Jacobowitz
2006-02-19 Fred Fish <fnf@specifix.com>
* gdb.base/pc-fp.exp (get_valueofx): Don't print environment
specifix hex value as part of results.
* gdb.base/shreloc.exp (get_msym_addrs): Ditto.
projects / deliverable / binutils-gdb.git / log
