gdb/linux-record: Fix sizes of sigaction and sigset_t
The values were mistakenly set to size of glibc's sigset_t (128 bytes)
and sigaction (140 or 152 bytes) instead of the kernel ones. The kernel
has 4 or 8 byte old_sigset_t, 8 byte sigset_t, 16 or 32 byte old_sigaction,
20 or 32 byte sigaction.
i386 and arm wrongly set them to 2, when it should be 4. size_[ug]id is used
by getgroups32 etc syscalls, while size_old_[ug]id is used for getgroups16
and friends.
* gdb.reverse/fstatat-reverse.c: New test.
* gdb.reverse/fstatat-reverse.exp: New file.
* gdb.reverse/getresuid-reverse.c: New test.
* gdb.reverse/getresuid-reverse.exp: New file.
* gdb.reverse/pipe-reverse.c: New test.
* gdb.reverse/pipe-reverse.exp: New file.
* gdb.reverse/readv-reverse.c: New test.
* gdb.reverse/readv-reverse.exp: New file.
* gdb.reverse/recvmsg-reverse.c: New test.
* gdb.reverse/recvmsg-reverse.exp: New file.
* gdb.reverse/time-reverse.c: New test.
* gdb.reverse/time-reverse.exp: New file.
* gdb.reverse/waitpid-reverse.c: New test.
* gdb.reverse/waitpid-reverse.exp: New file.
Simon Marchi [Fri, 30 Oct 2015 15:50:00 +0000 (11:50 -0400)]
gdbserver/proc-service.c: Change CORE_ADDR cast to uintptr_t
Fixes on i386:
../../../binutils-gdb/gdb/gdbserver/proc-service.c: In function ps_pdread:
../../../binutils-gdb/gdb/gdbserver/proc-service.c:83:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
../../../binutils-gdb/gdb/gdbserver/proc-service.c: In function ps_pdwrite:
../../../binutils-gdb/gdb/gdbserver/proc-service.c:93:30: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
I could have kept both casts:
(CORE_ADDR) (uintptr_t) addr
but it's cleaner this way. The uintptr_t implicitely gets promoted to a
CORE_ADDR, which is at least as long as uintptr_t.
gdb/gdbserver/ChangeLog:
* proc-service.c (ps_pdread): Change CORE_ADDR cast to uintptr_t.
(ps_pdwrite): Likewise.
Pedro Alves [Thu, 29 Oct 2015 16:18:30 +0000 (16:18 +0000)]
mdebugread.c: Address class -> address class index
This fixes this error in C++ mode:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/mdebugread.c:654:11: error: invalid conversion from ‘int’ to ‘address_class’ [-fpermissive]
theclass = mdebug_register_index;
^
The "theclass" local is of type enum address_class, however, what it
really holds is an address class index. Class index values by design
match the address class values up until LOC_FINAL_VALUE, but extend
beyond that, so it's not really right to store an address class index
in an enum address_class.
The fix is really the same making the 'theclass' local be of type int,
but while we're at it, we get rid of the goto, and thus the local
becomes the 'aclass_index' parameter in the new add_data_symbol
function.
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* mdebugread.c (add_data_symbol): New function, factored out from
...
(parse_symbol): ... here. Delete 'theclass' local.
Simon Marchi [Thu, 29 Oct 2015 17:41:14 +0000 (13:41 -0400)]
Add a cast in jit_target_read_impl
We could change the signature of the function. However, it would
require changing gdb_target_read in jit-reader.h, which is an exported
interface. It's probably better to just add a cast in our code than to
break other people's code.
Pedro Alves [Thu, 29 Oct 2015 15:25:08 +0000 (15:25 +0000)]
Add cast to VEC_iterate
Fixes this in C++:
../../src/gdb/break-catch-sig.c: In function ‘int VEC_gdb_signal_type_iterate(const VEC_gdb_signal_type*, unsigned int, gdb_signal_type*)’:
../../src/gdb/common/vec.h:576:12: error: invalid conversion from ‘int’ to ‘gdb_signal_type {aka gdb_signal}’ [-fpermissive]
*ptr = 0; \
^
../../src/gdb/common/vec.h:417:1: note: in expansion of macro ‘DEF_VEC_FUNC_P’
DEF_VEC_FUNC_P(T) \
^
../../src/gdb/break-catch-sig.c:37:1: note: in expansion of macro ‘DEF_VEC_I’
DEF_VEC_I (gdb_signal_type);
^
I actually carried a different fix in the C++ branch that removed this
assignment and then adjusted all callers that depended on it. The
thinking was that this is for the case where we're returning false,
indicating end of iteration. But that results in a much larger and
tricker patch; looking back it seems quite pointless. I looked at the
history of GCC's C++ conversion and saw that they added this same cast
to their version of vec.h, FWIW. (GCC's vec.h is completely different
nowadays, having been converted to templates meanwhile.)
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* common/vec.h (DEF_VEC_FUNC_P) [iterate]: Cast 0 to type T.
Pedro Alves [Thu, 29 Oct 2015 17:23:34 +0000 (17:23 +0000)]
gnu-v2-abi.c: Add casts
I looked at changing these is_destructor_name/is_constructor_name
interfaces in order to detangle the boolean result from the ctor/dtor
kind return, but then realized that this design goes all the way down
to the libiberty demangler interfaces. E.g, include/demangle.h:
~~~
/* Return non-zero iff NAME is the mangled form of a constructor name
in the G++ V3 ABI demangling style. Specifically, return an `enum
gnu_v3_ctor_kinds' value indicating what kind of constructor
it is. */
extern enum gnu_v3_ctor_kinds
is_gnu_v3_mangled_ctor (const char *name);
enum gnu_v3_dtor_kinds {
gnu_v3_deleting_dtor = 1,
gnu_v3_complete_object_dtor,
gnu_v3_base_object_dtor,
/* These are not part of the V3 ABI. Unified destructors are generated
as a speed-for-space optimization when the -fdeclone-ctor-dtor option
is used, and are always internal symbols. */
gnu_v3_unified_dtor,
gnu_v3_object_dtor_group
};
~~~
H.J. Lu [Thu, 29 Oct 2015 15:47:12 +0000 (08:47 -0700)]
Make GOT entry size target-dependent
The GOT entry size is target-dependent. This patch adds a got_entry_size
function to Sized_target class so that a target can provide a value
different from default.
PR gold/19184
* incremental.cc (Got_plt_view_info): Add got_entry_size.
(Local_got_offset_visitor::visit): Replace got_entry_size_
with info_.got_entry_size.
(Local_got_offset_visitor::got_entry_size_): Removed.
(Global_got_offset_visitor::visit): Replace got_entry_size_
with info_.got_entry_size.
(Global_got_offset_visitor::got_entry_size_): Removed.
(Output_section_incremental_inputs::write_got_plt): Initialize
view_info.got_entry_size.
* target.h (Sized_target::got_entry_size): New virtual function.
* x86_64.cc (Target_x86_64::got_entry_size): New function.
Ed Schouten [Thu, 29 Oct 2015 13:49:03 +0000 (13:49 +0000)]
Add support for AArch64 CloudABI binaries.
ld * Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
CloudABI on aarch64. For this target we have to make sure we use
ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
* configure.tgt (targ_emul): Likewise.
* emulparams/aarch64cloudabi.sh: New file.
* emulparams/aarch64cloudabib.sh: New file.
* Makefile.in: Regenerate.
bfd * config.bfd (targ_defvec): Add support for CloudABI on aarch64.
For this target we have to make sure we use ELFOSABI_CLOUDABI
instead of ELFOSABI_NONE.
* configure.ac (tb): Likewise.
* elfnn-aarch64.c: Likewise.
* targets.c (_bfd_target_vector): Likewise.
* configure: Regenerate.
gas * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
Pedro Alves [Thu, 29 Oct 2015 12:55:03 +0000 (12:55 +0000)]
bfd/libhppa.h: Make C++ compatible
Fixes this when GDB is built in C++ mode:
In file included from /home/pedro/gdb/mygit/src/gdb/../bfd/som.h:27:0,
from /home/pedro/gdb/mygit/src/gdb/somread.c:31:
/home/pedro/gdb/mygit/src/gdb/../bfd/libhppa.h: In function ‘int bfd_hppa_insn2fmt(bfd*, int)’:
/home/pedro/gdb/mygit/src/gdb/../bfd/libhppa.h:380:42: error: invalid conversion from ‘int’ to ‘hppa_opcode_type’ [-fpermissive]
#define get_opcode(insn) (((insn) >> 26) & 0x3f)
^
/home/pedro/gdb/mygit/src/gdb/../bfd/libhppa.h:465:30: note: in expansion of macro ‘get_opcode’
enum hppa_opcode_type op = get_opcode (insn);
^
bfd/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
Pedro Alves [Thu, 29 Oct 2015 12:55:02 +0000 (12:55 +0000)]
gdbserver: enum gdb_signal casts
This is code parsing RSP signal numbers, checking whether the numbers
are indeed valid/known GDB signals, and then converting to host signal
numbers. I considered adding temporary enum gdb_signal variables
instead, but didn't really like the result.
gdb/gdbserver/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* server.c (handle_v_cont, process_serial_event): Add enum
gdb_signal casts to signal parsing code.
Pedro Alves [Thu, 29 Oct 2015 12:55:02 +0000 (12:55 +0000)]
gdbserver: btrace enums
Fixes:
../../../src/gdb/gdbserver/linux-low.c: In function ‘int linux_low_read_btrace(btrace_target_info*, buffer*, int)’:
../../../src/gdb/gdbserver/linux-low.c:6827:48: error: invalid conversion from ‘int’ to ‘btrace_read_type’ [-fpermissive]
err = linux_read_btrace (&btrace, tinfo, type);
^
In file included from ../../../src/gdb/gdbserver/linux-low.c:98:0:
../../../src/gdb/gdbserver/../nat/linux-btrace.h:116:26: error: initializing argument 3 of ‘btrace_error linux_read_btrace(btrace_data*, btrace_target_info*, btrace_read_type)’ [-fpermissive]
extern enum btrace_error linux_read_btrace (struct btrace_data *btrace,
^
The cyclic dependency the comment talks about is no longer relevant:
https://sourceware.org/ml/gdb-patches/2015-10/msg00643.html
gdb/gdbserver/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_low_read_btrace): Change type of 'type'
parameter.
* server.c (handle_qxfer_btrace): Change type of 'type'
local.
* target.h (struct target_ops) <read_btrace>: Change type of
'type' parameter. Update comment.
Pedro Alves [Thu, 29 Oct 2015 12:55:01 +0000 (12:55 +0000)]
Add cast to exception_none
Fixes, in C++ mode:
../../src/gdb/common/common-exceptions.c:23:69: error: invalid conversion from ‘int’ to ‘return_reason’ [-fpermissive]
const struct gdb_exception exception_none = { 0, GDB_NO_ERROR, NULL };
^
(I considered adding an enum value for '0', but the code and comments
around return_reason and its uses explain how 0 is special/internal,
so I'm leaving it be.)
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
Pedro Alves [Thu, 29 Oct 2015 12:55:01 +0000 (12:55 +0000)]
compile: Rename struct type_map_instance::gcc_type field
Fixes:
src/gdb/compile/compile-c-types.c:36:12: error: declaration of ‘gcc_type type_map_instance::gcc_type’ [-fpermissive]
gcc_type gcc_type;
^
In file included from src/gdb/../include/gcc-c-interface.h:23:0,
from src/gdb/compile/compile-internal.h:21,
from src/gdb/compile/compile-c-types.c:23:
src/gdb/../include/gcc-interface.h:32:28: error: changes meaning of ‘gcc_type’ from ‘typedef long long unsigned int gcc_type’ [-fpermissive]
typedef unsigned long long gcc_type;
^
src/gdb/compile/compile-c-types.c: In function ‘gcc_type convert_qualified(compile_c_instance*, type*)’:
src/gdb/compile/compile-c-types.c:310:19: error: invalid conversion from ‘int’ to ‘gcc_qualifiers’ [-fpermissive]
quals);
^
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
Pedro Alves [Thu, 29 Oct 2015 12:55:01 +0000 (12:55 +0000)]
Don't assume break/continue inside a TRY block works
In C++, this:
try
{
break;
}
catch (..)
{}
is invalid. However, because our TRY/CATCH macros support it in C,
the C++ version of those macros support it too. To catch such
assumptions, this adds a (disabled) hack that maps TRY/CATCH to raw
C++ try/catch. Then it goes through all instances that building on
x86_64 GNU/Linux trips on, fixing them.
This isn't strictly necessary yet, but I think it's nicer to try to
keep the tree in a state where it's easier to eliminate the TRY/CATCH
macros.
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Don't
assume that "break" breaks out of a TRY/CATCH.
* python/py-framefilter.c (py_print_single_arg): Don't assume
"continue" breaks out of a TRY/CATCH.
* python/py-value.c (valpy_binop_throw): New function, factored
out from ...
(valpy_binop): ... this.
(valpy_richcompare_throw): New function, factored
out from ...
(valpy_richcompare): ... this.
* solib.c (solib_read_symbols): Don't assume "break" breaks out
of a TRY/CATCH.
* common/common-exceptions.h [USE_RAW_CXX_TRY]
<TRY/CATCH/END_CATCH>: Define as 1-1 wrappers around try/catch.
Nick Clifton [Thu, 29 Oct 2015 10:45:10 +0000 (10:45 +0000)]
Fix reporting of command line options that need an argument, but which occur as the last option on the command line.
PR ld/19146
* lexsup.c (parse_args): Correct error message for an option that
is missing its argument if that option is the last one on the
command line.
Alan Modra [Thu, 29 Oct 2015 05:46:22 +0000 (16:16 +1030)]
Re: Orphan output section with multiple input sections
The last patch missed handling the case where the ideal place to put
an orphan was after a non-existent output section statement, as can
happen when not using the builtin linker scripts. This patch uses the
updated flags for that case too, and extends the support to mmo and pe.
PR ld/19162
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Pass
updated flags to lang_output_section_find_by_flags.
* emultempl/mmo.em (mmo_place_orphan): Merge flags for any
other input sections that might match a new output section to
decide placement.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* ldlang.c (lang_output_section_find_by_flags): Add sec_flags param.
* ldlang.h (lang_output_section_find_by_flags): Update prototype.
Simon Dardis [Wed, 28 Oct 2015 16:52:17 +0000 (09:52 -0700)]
Move encoded as 'or' in binutils.
A patch (http://sourceware.org/ml/binutils/2015-07/msg00376.html)
submitted to binutils will be encoding move as an 'or' instruction over
[d]addu in assembly and various code stubs. This patch for gdb addresses
that change for the mips specific parts of gdb.
gdb/ChangeLog:
* mips-linux-tdep.c (mips_linux_in_dynsym_stub): Recognise 'or'
as move along with [d]addu.
H.J. Lu [Wed, 28 Oct 2015 16:15:17 +0000 (09:15 -0700)]
Check R_386_GOT32/R_386_GOT32X without base register
The R_386_GOT32 and R_386_GOT32X relocations may be used without base
register:
movl bar@GOT, %eax
Its calculation is G + A, instead of G + A - GOT, and it can only used
to generate non-PIC executable. Include the .got.plt section address
for R_386_GOT32 and R_386_GOT32X relocations without base register.
Don't allow R_386_GOT32 and R_386_GOT32X relocations without base
register when making a PIC output.
PR gold/19177
* i386.cc (Target_i386::Relocate::relocate): Check R_386_GOT32
and R_386_GOT32X relocations without base register.
Yao Qi [Mon, 5 Oct 2015 10:15:58 +0000 (11:15 +0100)]
Pass noaliases_p to aarch64_decode_insn
Nowadays aarch64_decode_insn is a public interface used by both
opcodes and gdb. However, its behaviour relies on a global variable
no_aliases, which isn't a good practise. On the other hand, In default,
no_aliases is zero, but in GDB, we do want no alias when decoding
instructions for prologue analysis (patches to be posted), so that we
can handle both instructions "add" and "mov" (an alias of "add") as
"add". The code in GDB can be simplified.
This patch adds a new argument in aarch64_decode_insn, and pass no_aliases
to it. In GDB side, always pass 1 to it.
* aarch64-dis.c (aarch64_decode_insn): Add one argument
noaliases_p. Update comments. Pass noaliases_p rather than
no_aliases to aarch64_opcode_decode.
(print_insn_aarch64_word): Pass no_aliases to
aarch64_decode_insn.
gdb:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Pass 1 to
aarch64_decode_insn.
Nick Clifton [Wed, 28 Oct 2015 13:52:11 +0000 (13:52 +0000)]
Fix recent STM324LXX patch to compile on 32-bit hosts.
* elf32-arm.c (create_instruction_branch_absolute): Replace
pointer parameters with a simple integer parameter.
(stm32l4xx_create_replacing_stub_ldmia): Update calls to
create_instruction_branch_absolute.
(stm32l4xx_create_replacing_stub_ldmdb): Likewise.
(stm32l4xx_create_replacing_stub_vldm): Likewise.
(elf32_arm_write_section): Use pointer type for veneer addresses.
Pedro Alves [Tue, 27 Oct 2015 17:25:09 +0000 (17:25 +0000)]
Make host_address_to_string/gdb_print_host_address cast parameter to 'void *'
Fixes a set of errors like:
../../src/gdb/symfile-debug.c: In function ‘int debug_qf_map_symtabs_matching_filename(objfile*, const char*, const char*, int (*)(symtab*, void*), void*)’:
../../src/gdb/symfile-debug.c:137:39: error: invalid conversion from ‘int (*)(symtab*, void*)’ to ‘const void*’ [-fpermissive]
host_address_to_string (callback),
^
Note this has to work with data and function pointers. In C++11 we
may perhaps do something a bit safer, but we're not there yet, and I
don't think it really matters. For now just always do a simple
C-style cast in host_address_to_string itself. No point in adding a
void * cast to each and every caller.
gdb/ChangeLog:
2015-10-27 Pedro Alves <palves@redhat.com>
* common/print-utils.c (host_address_to_string): Rename to ...
(host_address_to_string_1): ... this.
* common/print-utils.h (host_address_to_string): Reimplement as
wrapper around host_address_to_string_1.
* utils.c (gdb_print_host_address): Rename to ...
(gdb_print_host_address_1): ... this.
* utils.h (gdb_print_host_address): Reimplement as wrapper macro
around host_address_to_string_1.
Pedro Alves [Tue, 27 Oct 2015 17:25:09 +0000 (17:25 +0000)]
target_read_memory&co: no longer return target_xfer_status
Years ago, these functions used to return errno/EIO. Later, through a
series of changes that intended to remove native/remote differences,
they ended up returning a target_xfer_status in disguise.
Unlike target_xfer_partial&co, the point of target_read_memory&co is
to either fully succeed or fail. On error, they always return
TARGET_XFER_E_IO. So there's no real point in casting the return of
target_read_memory to a target_xfer_status to pass it to memory_error.
Instead, it results in clearer code to simply decouple
target_read_memory&co's return from target_xfer_status.
This fixes build errors like this in C++ mode:
../../src/gdb/corefile.c: In function ‘void read_stack(CORE_ADDR, gdb_byte*, ssize_t)’:
../../src/gdb/corefile.c:276:34: error: invalid conversion from ‘int’ to ‘target_xfer_status’ [-fpermissive]
memory_error (status, memaddr);
^
../../src/gdb/corefile.c:216:1: error: initializing argument 1 of ‘void memory_error(target_xfer_status, CORE_ADDR)’ [-fpermissive]
gdb/ChangeLog:
2015-10-27 Pedro Alves <palves@redhat.com>
* alpha-tdep.c (alpha_read_insn): Always pass TARGET_XFER_E_IO to
memory_error. Rename local 'status' to 'res'.
* c-lang.c (c_get_string): Always pass TARGET_XFER_E_IO to
memory_error.
* corefile.c (read_stack, read_code, write_memory): Always pass
TARGET_XFER_E_IO to memory_error.
* disasm.c (dis_asm_memory_error): Always pass TARGET_XFER_E_IO to
memory_error. Rename parameter 'status' to 'err'.
(dump_insns): Rename local 'status' to 'err'.
* mips-tdep.c (mips_fetch_instruction): Rename parameter 'statusp'
to 'errp'. Rename local 'status' to 'err'. Always pass
TARGET_XFER_E_IO to memory_error.
(mips_breakpoint_from_pc): Rename local 'status' to 'err'.
* target.c (target_read_memory, target_read_raw_memory)
(target_read_stack, target_read_code, target_write_memory)
(target_write_raw_memory): Return -1 on error instead of
TARGET_XFER_E_IO.
* valprint.c (val_print_string): Rename local 'errcode' to 'err'.
Always pass TARGET_XFER_E_IO to memory_error. Update comment.
Simon Marchi [Tue, 27 Oct 2015 17:11:45 +0000 (13:11 -0400)]
guile: Change return value of gdbscm_with_guile for const char *
The documentation of gdbscm_with_guile says that it returns a statically
allocated string (IOW, a const char *). We can reflect that in its
return value type, and get rid of C++ build errors.
Initially fixes:
/home/simark/src/binutils-gdb/gdb/guile/scm-disasm.c: In function ‘void* gdbscm_disasm_read_memory_worker(void*)’:
/home/simark/src/binutils-gdb/gdb/guile/scm-disasm.c:93:12: error: invalid conversion from ‘const void*’ to ‘void*’ [-fpermissive]
return "seek error";
gdb/ChangeLog:
* guile/guile-internal.h (gdbscm_with_guile): Change return
types to const char *.
* guile/scm-safe-call.c (gdbscm_with_guile): Likewise.
(struct c_data) <func>: Likewise.
(struct c_data) <result>: Change type to const char *.
(scscm_eval_scheme_string): Change return type to
const char *.
(scscm_source_scheme_script): Likewise.
(gdbscm_safe_eval_string): Change type of result variable to
const char * and remove cast.
(gdbscm_safe_source_script): Likewise.
* guile/scm-disasm.c (gdbscm_disasm_read_memory_worker):
Change return type to const char *.
(gdbscm_disasm_read_memory): Change type of status to
const char *.
Pedro Alves [Tue, 27 Oct 2015 16:03:24 +0000 (16:03 +0000)]
source.c:openp: save/restore errno
openp's return is documented as:
~~~
If a file is found, return the descriptor.
Otherwise, return -1, with errno set for the last name we tried to open. */
~~~
By inspection, I noticed that there are function calls after the ones
that first set errno, and those may clobber errno. It's safer to save
errno when see an open fail, and restore it on exit.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-10-27 Pedro Alves <palves@redhat.com>
* source.c (openp): New local 'last_errno'. Use it to
save/restore errno.
Simon Marchi [Tue, 27 Oct 2015 14:53:24 +0000 (10:53 -0400)]
ctf.c: Fix int/enum implicit cast
This patch was taken directly from Pedro's branch.
Right now, SET_INT32_FIELD is used to set enum fields. This works in C,
but not C++. Therefore, define the new SET_ENUM_FIELD, which casts the
value to the right enum type.
gdb/ChangeLog:
* ctf.c (SET_ENUM_FIELD): New macro.
(ctf_read_status): Use it.
(ctf_read_tp): Use it.
Vinay Kumar [Tue, 27 Oct 2015 14:49:02 +0000 (14:49 +0000)]
Display system registers by their names when disassembling RL78 instructions.
PR binutils/19158
opcodes * rl78-decode.opc: Add 's' print operator to instructions that
access system registers.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78_common): Decode all system
registers.
tests * gas/rl78/pr19158.s: New test source file.
* gas/rl78/pr19158.d: New test case.
* gas/rl78/rl78.exp: Run the new test.
Vinay Kumar [Tue, 27 Oct 2015 14:00:40 +0000 (14:00 +0000)]
Fix RL78 disassembly so that SP+OFFSET addressing always shows the offset, even when zero.
PR binutils/19157
opcodes * rl78-decode.opc: Add 'a' print operator to mov instructions
using stack pointer plus index addressing.
* rl78-decode.c: Regenerate.
tests * gas/rl78: New directory.
* gas/rl78/rl78.exp: New test driver.
* gas/rl78/pr19157.s: New test source file.
* gas/rl78/pr19157.d: New test case.
Simon Marchi [Tue, 27 Oct 2015 13:34:30 +0000 (09:34 -0400)]
Add scm_t_dynwind_flags casts
There is a handful of calls to
scm_dynwind_begin (0);
where the parameter is an enum, scm_t_dynwind_flags. In C++, we have no
choice but to add an explicit cast, since there is no enum value that
represents 0 (no flags set).
Simon Marchi [Tue, 27 Oct 2015 13:33:29 +0000 (09:33 -0400)]
Introduce ax_raw_byte and use it
This patch was taken directly from Pedro's branch.
ax_simple is used to append an agent expression operator to an agent
expression string. Therefore, it takes an enum agent_op as input.
There is an instance where it's called to append a raw byte, unrelated
to the enum. It makes the build fail in C++ mode.
This patch introduces ax_raw_byte for that purpose and uses it.
gdb/ChangeLog:
* ax.h (ax_raw_byte): New declaration.
* ax-general.c (ax_raw_byte): New function.
(ax_simple): Use ax_raw_byte.
* ax-gdb.c (gen_printf): Likewise.
Laurent Alfonsi [Tue, 27 Oct 2015 13:20:33 +0000 (13:20 +0000)]
Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time workaround for a bug in the bus matrix / memory controller for some of the STM32 Cortex-M4 based products (STM32L4xx).
bfd * bfd-in2.h: Regenerate.
* bfd-in.h (bfd_arm_stm32l4xx_fix): New enum. Specify how
STM32L4XX instruction scanning should be done.
(bfd_elf32_arm_set_stm32l4xx_fix)
(bfd_elf32_arm_stm32l4xx_erratum_scan)
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): Add prototypes.
(bfd_elf32_arm_set_target_relocs): Add stm32l4xx fix type argument
to prototype.
* elf32-arm.c (STM32L4XX_ERRATUM_VENEER_SECTION_NAME)
(STM32L4XX_ERRATUM_VENEER_ENTRY_NAME): Define macros.
(elf32_stm32l4xx_erratum_type): New enum.
(elf32_stm32l4xx_erratum_list): New struct. List of veneers or
jumps to veneers.
(_arm_elf_section_data): Add stm32l4xx_erratumcount,
stm32l4xx_erratumlist.
(elf32_arm_link_hash_table): Add stm32l4xx_erratum_glue_size,
stm32l4xx_fix and num_stm32l4xx_fixes fields.
(ctz): New function.
(popcount): New function.
(elf32_arm_link_hash_table_create): Initialize stm32l4xx_fix.
(put_thumb2_insn): New function.
(STM32L4XX_ERRATUM_LDM_VENEER_SIZE): Define. Size of a veneer for
LDM instructions.
(STM32L4XX_ERRATUM_VLDM_VENEER_SIZE): Define. Size of a veneer for
VLDM instructions.
(bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
glue section.
(record_stm32l4xx_erratum_veneer) : New function. Create a single
veneer, and its associated symbols.
(bfd_elf32_arm_add_glue_sections_to_bfd): Add STM32L4XX erratum glue.
(bfd_elf32_arm_set_stm32l4xx_fix): New function. Set the type of
erratum workaround required.
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): New function. Find
out where veneers and branches to veneers have been placed in
virtual memory after layout.
(is_thumb2_ldmia): New function.
(is_thumb2_ldmdb): Likewise.
(is_thumb2_vldm ): Likewise.
(stm32l4xx_need_create_replacing_stub): New function. Decide if a
veneer must be emitted.
(bfd_elf32_arm_stm32l4xx_erratum_scan): Scan the sections of an
input BFD for potential erratum-triggering insns. Record results.
(bfd_elf32_arm_set_target_relocs): Set stm32l4xx_fix field in
global hash table.
(elf32_arm_size_dynamic_sections): Collect glue information.
(create_instruction_branch_absolute): New function.
(create_instruction_ldmia): Likewise.
(create_instruction_ldmdb): Likewise.
(create_instruction_mov): Likewise.
(create_instruction_sub): Likewise.
(create_instruction_vldmia): Likewise.
(create_instruction_vldmdb): Likewise.
(create_instruction_udf_w): Likewise.
(create_instruction_udf): Likewise.
(push_thumb2_insn32): Likewise.
(push_thumb2_insn16): Likewise.
(stm32l4xx_fill_stub_udf): Likewise.
(stm32l4xx_create_replacing_stub_ldmia): New function. Expands the
replacing stub for ldmia instructions.
(stm32l4xx_create_replacing_stub_ldmdb): Likewise for ldmdb.
(stm32l4xx_create_replacing_stub_vldm): Likewise for vldm.
(stm32l4xx_create_replacing_stub): New function. Dispatches the
stub emission to the appropriate functions.
(elf32_arm_write_section): Output veneers, and branches to veneers.
ld * ld.texinfo: Description of the STM32L4xx erratum workaround.
* emultempl/armelf.em (stm32l4xx_fix): New.
(arm_elf_before_allocation): Choose the type of fix, scan for
erratum.
(gld${EMULATION_NAME}_finish): Fix veneer locations.
(arm_elf_create_output_section_statements): Propagate
stm32l4xx_fix value.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_STM32L4XX_FIX.
(PARSE_AND_LIST_LONGOPTS): Add entry for handling
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_OPTION): Add entry for helping on
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_ARGS_CASES): Treat OPTION_STM32L4XX_FIX.
Add support for 32-bit and 64-bit PowerPC AIX core files.
* configure.ac (powerpc64-*-aix[5-9].*): Match powerpc64 running
aix for core file support.
* configure: Regenerate.
* rs6000-core.c: Check for __ld_info64 if compiling 64-bit gdb.
Added BFD64 check if we are using old core file format for 32-bit gdb.
Set sizeof CORE_COMMONSZ appropriately in case of either new or
old core file format.
(read_hdr): Added BFD64 check for 64-bit support.
(rs6000coff_core_p): Likewise.
(rs6000coff_core_file_matches_executable_p): Likewise.
(rs6000coff_core_file_failing_command): Likewise.
(rs6000coff_core_file_failing_signal): Likewise.
Add support for debugging core files generated by binaries in
Large Memory model.
(rs6000coff_core_p): If Large Memory Model is used, then the .data
segment should start from BDATAORG which has been defined in the
system header files.
Jan Kratochvil [Tue, 27 Oct 2015 05:08:45 +0000 (06:08 +0100)]
Fix access_to_packed_array.exp typos/errors
Running ./gdb.ada/access_to_packed_array.exp ...
ERROR: tcl error sourcing ./gdb.ada/access_to_packed_array.exp.
ERROR: extra characters after close-quote
while executing
"gdb_test "print pack.a" "\\(0 => 1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\)")"
(file "./gdb.ada/access_to_packed_array.exp" line 29)
invoked from within
"source ./gdb.ada/access_to_packed_array.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source ./gdb.ada/access_to_packed_array.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
Unrelated to the typos I have changed the print expectations s/"x"/" = x"/
as for example expectation "3" should not match " = 43".
2015-10-27 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.ada/access_to_packed_array.exp: Fix typos erroring the testfile.
Alan Modra [Tue, 27 Oct 2015 01:31:55 +0000 (12:01 +1030)]
Evaluate __start_* and __stop_* symbol PROVIDE expressions early
Makes these symbols defined before bfd_elf_size_dynamic_sections, to
avoid horrible hacks elsewhere. The exp_fold_tree undefweak change
is necessary to define undefweak symbols early too. The comment was
wrong. PROVIDE in fact defines undefweak symbols, via
bfd_elf_record_link_assignment.
PR ld/19175
* ldlang.c (lang_insert_orphan): Evaluate __start_* and __stop_*
symbol PROVIDE expressions.
* ldexp.c (exp_fold_tree_1 <etree_provide>): Define undefweak
references.
H.J. Lu [Mon, 26 Oct 2015 23:32:34 +0000 (16:32 -0700)]
Check symbol defined by assignment in linker script
Symbol symbol defined by an assignment in a linker script has type
bfd_link_hash_new. elf_i386_convert_load and elf_x86_64_convert_load
should check bfd_link_hash_new to see if a symbol is defined by a linker
script.
Simon Marchi [Mon, 26 Oct 2015 19:05:50 +0000 (15:05 -0400)]
guile: Simplify ioscm_make_gdb_stdio_port
As pointed out by Pedro, it's clearer to do it this way. We can trust
that scm_mode_bits won't try to modify our string, even though it takes
a non-const char *.
gdb/ChangeLog:
* guile/scm-ports.c (ioscm_make_gdb_stdio_port): Do not pass a
local char array to scm_mode_bits, use a cast instead.
Simon Marchi [Mon, 26 Oct 2015 16:58:32 +0000 (12:58 -0400)]
tui: Simplify tui_alloc_content
I stumbled upon this while doing some cxx-conversion work. Since the
x-family alloc functions throw on failure, it is useless to test their
result for failure. The else branch of != NULL is basically dead code.
I changed the type of element_block_ptr to struct tui_win_element, which
seems obvious (this is actually what raised the flag, casting the result
of xmalloc to struct tui_win_element* wouldn't work).
gdb/ChangeLog:
* tui/tui-data.c (tui_alloc_content): Don't check xmalloc
result. Change type of element_block_ptr. Change allocation to
use XNEWVEC.
H.J. Lu [Mon, 26 Oct 2015 13:10:23 +0000 (06:10 -0700)]
Properly convert address load of __start_XXX/__stop_XXX
Since __start_XXX and __stop_XXX symbols aren't defined when address
load is being converted, we need to check if there is an XXX output
section to get their section and value. This patch adds a new function,
bfd_link_get_defined_symbol, to search for the XXX output section to
check if __start_XXX and __stop_XXX symbols are defined.
bfd/
PR ld/19171
* elf32-i386.c (elf_i386_convert_load): Call
bfd_link_get_defined_symbol to check if a symbol is defined.
* elf64-x86-64.c (elf_x86_64_convert_load): Call
bfd_link_get_defined_symbol to get defined symbol section and
value.
* linker.c (bfd_link_get_defined_symbol): New function.
* bfd-in2.h: Regenerated.
Luis Machado [Mon, 26 Oct 2015 13:17:29 +0000 (11:17 -0200)]
Do not pass NULL for the string in catch_errors
I caught a segmentation fault while running gdb.reverse/sigall-reverse.exp,
in a mingw32 GDB, in this code path. It boils down to the code trying to
strlen () a NULL pointer. I tracked things down and it looks like
record_full_message_wrapper_safe is the only offender.
gdb/ChangeLog:
2015-10-26 Luis Machado <lgustavo@codesourcery.com>
* record-full.c (record_full_message_wrapper_safe): Pass empty string to
catch_errors call instead of NULL.
Simon Marchi [Mon, 26 Oct 2015 12:41:38 +0000 (08:41 -0400)]
Fix constness problem in ioscm_make_gdb_stdio_port
ioscm_make_gdb_stdio_port passes const char pointers (literal strings) to
scm_mode_bits, which takes a non-const char pointer. Ideally, we would
change scm_mode_bits to take a const char pointer, but it's not part of
an API we control.
Instead, it's easy enough to build the string to pass to scm_mode_bits in
a (non-const) char array and pass that.
gdb/ChangeLog:
* guile/scm-ports.c (ioscm_make_gdb_stdio_port): Pass non-const
char pointer to scm_mode_bits.
Simon Marchi [Mon, 26 Oct 2015 12:41:36 +0000 (08:41 -0400)]
scm-symbol.c: Add (domain_enum) casts
We currently pass integers as domain_enums to lookup_symbol. The
most obvious fix is to add casts there.
I first thought of changing the type of the domain variables to
domain_enum. However, because we pass a pointer to them to
gdbscm_parse_function_args, which expects them to be integers (because
of the format string), I don't think it would be correct. If the enum
does not have the same size as an int, gdbscm_parse_function_args could
write past the memory of domain, overwriting something else on the
stack.
Jan Kratochvil [Sun, 25 Oct 2015 11:16:10 +0000 (12:16 +0100)]
Fix compile.exp error message expectation
commit cdaec3f3e7ea9118204f0e579bd3257234fbae63
Author: Luis Machado <lgustavo@codesourcery.com>
Date: Thu Aug 27 02:00:16 2015 -0300
Mention language in compile error message
projects / deliverable / binutils-gdb.git / log
