source.c:openp: save/restore errno

openp's return is documented as:

~~~
   If a file is found, return the descriptor.
   Otherwise, return -1, with errno set for the last name we tried to open.  */
~~~

By inspection, I noticed that there are function calls after the ones
that first set errno, and those may clobber errno.  It's safer to save
errno when see an open fail, and restore it on exit.

Tested on x86_64 Fedora 20.

gdb/ChangeLog:
2015-10-27  Pedro Alves  <palves@redhat.com>

* source.c (openp): New local 'last_errno'.  Use it to
save/restore errno.

Fix RL78 disassembly of DE+offset addressing to always show the offset, even when zero.

PR binutils/19159
opcodes * rl78-decode.opc (MOV): Added offset to DE register in index
addressing mode.
* rl78-decode.c: Regenerate.

test * gas/rl78/pr19159.s: New test source file.
* gas/rl78/pr19159.d: New test case.
* gas/rl78/rl78.exp: Run the new test.

psymtab.c: Add casts

... as needed for C++.

gdb/ChangeLog:
2015-10-27  Pedro Alves  <palves@redhat.com>

* psymtab.c (dump_psymtab_addrmap_1): Add casts.

ctf.c: Fix int/enum implicit cast

This patch was taken directly from Pedro's branch.

Right now, SET_INT32_FIELD is used to set enum fields.  This works in C,
but not C++.  Therefore, define the new SET_ENUM_FIELD, which casts the
value to the right enum type.

gdb/ChangeLog:

* ctf.c (SET_ENUM_FIELD): New macro.
(ctf_read_status): Use it.
(ctf_read_tp): Use it.

Display system registers by their names when disassembling RL78 instructions.

PR binutils/19158
opcodes * rl78-decode.opc: Add 's' print operator to instructions that
access system registers.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78_common): Decode all system
registers.

tests * gas/rl78/pr19158.s: New test source file.
* gas/rl78/pr19158.d: New test case.
* gas/rl78/rl78.exp: Run the new test.

Fix RL78 disassembly so that SP+OFFSET addressing always shows the offset, even when zero.

PR binutils/19157
opcodes * rl78-decode.opc: Add 'a' print operator to mov instructions
using stack pointer plus index addressing.
* rl78-decode.c: Regenerate.

tests * gas/rl78: New directory.
* gas/rl78/rl78.exp: New test driver.
* gas/rl78/pr19157.s: New test source file.
* gas/rl78/pr19157.d: New test case.

Add scm_t_dynwind_flags casts

There is a handful of calls to

  scm_dynwind_begin (0);

where the parameter is an enum, scm_t_dynwind_flags.  In C++, we have no
choice but to add an explicit cast, since there is no enum value that
represents 0 (no flags set).

gdb/ChangeLog:

* guile/scm-breakpoint.c (gdbscm_set_breakpoint_stop_x): Add
scm_t_dynwind_flags casts.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
* guile/scm-ports.c (gdbscm_open_memory): Likewise.
* guile/scm-value.c (gdbscm_value_to_string): Likewise.

Introduce ax_raw_byte and use it

This patch was taken directly from Pedro's branch.

ax_simple is used to append an agent expression operator to an agent
expression string.  Therefore, it takes an enum agent_op as input.
There is an instance where it's called to append a raw byte, unrelated
to the enum.  It makes the build fail in C++ mode.

This patch introduces ax_raw_byte for that purpose and uses it.

gdb/ChangeLog:

* ax.h (ax_raw_byte): New declaration.
* ax-general.c (ax_raw_byte): New function.
(ax_simple): Use ax_raw_byte.
* ax-gdb.c (gen_printf): Likewise.

ada-lang.h: Add cast in GROW_VECT

The assignment requires a cast in C++.  We only use this macro for
vectors of chars, so adding (char *) diretly will do for now.

gdb/ChangeLog:

* ada-lang.h (GROW_VECT): Add cast.

Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time workaround for a bug in the bus matrix / memory controller for some of the STM32 Cortex-M4 based products (STM32L4xx).

bfd  * bfd-in2.h: Regenerate.
     * bfd-in.h (bfd_arm_stm32l4xx_fix): New enum. Specify how
     STM32L4XX instruction scanning should be done.
     (bfd_elf32_arm_set_stm32l4xx_fix)
     (bfd_elf32_arm_stm32l4xx_erratum_scan)
     (bfd_elf32_arm_stm32l4xx_fix_veneer_locations): Add prototypes.
     (bfd_elf32_arm_set_target_relocs): Add stm32l4xx fix type argument
     to prototype.
     * elf32-arm.c (STM32L4XX_ERRATUM_VENEER_SECTION_NAME)
     (STM32L4XX_ERRATUM_VENEER_ENTRY_NAME): Define macros.
     (elf32_stm32l4xx_erratum_type): New enum.
     (elf32_stm32l4xx_erratum_list): New struct. List of veneers or
     jumps to veneers.
     (_arm_elf_section_data): Add stm32l4xx_erratumcount,
     stm32l4xx_erratumlist.
     (elf32_arm_link_hash_table): Add stm32l4xx_erratum_glue_size,
     stm32l4xx_fix and num_stm32l4xx_fixes fields.
     (ctz): New function.
     (popcount): New function.
     (elf32_arm_link_hash_table_create): Initialize stm32l4xx_fix.
     (put_thumb2_insn): New function.
     (STM32L4XX_ERRATUM_LDM_VENEER_SIZE): Define. Size of a veneer for
     LDM instructions.
     (STM32L4XX_ERRATUM_VLDM_VENEER_SIZE): Define. Size of a veneer for
     VLDM instructions.
     (bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
     glue section.
     (record_stm32l4xx_erratum_veneer) : New function. Create a single
     veneer, and its associated symbols.
     (bfd_elf32_arm_add_glue_sections_to_bfd): Add STM32L4XX erratum glue.
     (bfd_elf32_arm_set_stm32l4xx_fix): New function. Set the type of
     erratum workaround required.
     (bfd_elf32_arm_stm32l4xx_fix_veneer_locations): New function. Find
     out where veneers and branches to veneers have been placed in
     virtual memory after layout.
     (is_thumb2_ldmia): New function.
     (is_thumb2_ldmdb): Likewise.
     (is_thumb2_vldm ): Likewise.
     (stm32l4xx_need_create_replacing_stub): New function. Decide if a
     veneer must be emitted.
     (bfd_elf32_arm_stm32l4xx_erratum_scan): Scan the sections of an
     input BFD for potential erratum-triggering insns. Record results.
     (bfd_elf32_arm_set_target_relocs): Set stm32l4xx_fix field in
     global hash table.
     (elf32_arm_size_dynamic_sections): Collect glue information.
     (create_instruction_branch_absolute): New function.
     (create_instruction_ldmia): Likewise.
     (create_instruction_ldmdb): Likewise.
     (create_instruction_mov): Likewise.
     (create_instruction_sub): Likewise.
     (create_instruction_vldmia): Likewise.
     (create_instruction_vldmdb): Likewise.
     (create_instruction_udf_w): Likewise.
     (create_instruction_udf): Likewise.
     (push_thumb2_insn32): Likewise.
     (push_thumb2_insn16): Likewise.
     (stm32l4xx_fill_stub_udf): Likewise.
     (stm32l4xx_create_replacing_stub_ldmia): New function. Expands the
     replacing stub for ldmia instructions.
     (stm32l4xx_create_replacing_stub_ldmdb): Likewise for ldmdb.
     (stm32l4xx_create_replacing_stub_vldm): Likewise for vldm.
     (stm32l4xx_create_replacing_stub): New function. Dispatches the
     stub emission to the appropriate functions.
     (elf32_arm_write_section): Output veneers, and branches to veneers.

ld   * ld.texinfo: Description of the STM32L4xx erratum workaround.
     * emultempl/armelf.em (stm32l4xx_fix): New.
     (arm_elf_before_allocation): Choose the type of fix, scan for
     erratum.
     (gld${EMULATION_NAME}_finish): Fix veneer locations.
     (arm_elf_create_output_section_statements): Propagate
     stm32l4xx_fix value.
     (PARSE_AND_LIST_PROLOGUE): Define OPTION_STM32L4XX_FIX.
     (PARSE_AND_LIST_LONGOPTS): Add entry for handling
     --fix-stm32l4xx-629360.
     (PARSE_AND_LIST_OPTION): Add entry for helping on
     --fix-stm32l4xx-629360.
     (PARSE_AND_LIST_ARGS_CASES): Treat OPTION_STM32L4XX_FIX.

tests * ld-arm/arm-elf.exp (armelftests_common): Add STM32L4XX
       tests.
     * ld-arm/stm32l4xx-cannot-fix-far-ldm.d: New.
     * ld-arm/stm32l4xx-cannot-fix-far-ldm.s: Likewise.
     * ld-arm/stm32l4xx-cannot-fix-it-block.d: Likewise.
     * ld-arm/stm32l4xx-cannot-fix-it-block.s: Likewise.
     * ld-arm/stm32l4xx-fix-all.d: Likewise.
     * ld-arm/stm32l4xx-fix-all.s: Likewise.
     * ld-arm/stm32l4xx-fix-it-block.d: Likewise.
     * ld-arm/stm32l4xx-fix-it-block.s: Likewise.
     * ld-arm/stm32l4xx-fix-ldm.d: Likewise.
     * ld-arm/stm32l4xx-fix-ldm.s: Likewise.
     * ld-arm/stm32l4xx-fix-vldm.d: Likewise.
     * ld-arm/stm32l4xx-fix-vldm.s: Likewise.

Add support to readelf for reading NetBSD ELF core notes.

binutils * binutils.c (process_netbsd_elf_note): New function.
(process_note): Call the new function for NetBSD core notes.

include * common.h (NT_NETBSD_MARCH): Define.

Add support for 32-bit and 64-bit PowerPC AIX core files.

* configure.ac (powerpc64-*-aix[5-9].*): Match powerpc64 running
aix for core file support.
* configure: Regenerate.
* rs6000-core.c: Check for __ld_info64 if compiling 64-bit gdb.
Added BFD64 check if we are using old core file format for 32-bit gdb.
Set sizeof CORE_COMMONSZ appropriately in case of either new or
old core file format.
(read_hdr): Added BFD64 check for 64-bit support.
(rs6000coff_core_p): Likewise.
(rs6000coff_core_file_matches_executable_p): Likewise.
(rs6000coff_core_file_failing_command): Likewise.
(rs6000coff_core_file_failing_signal): Likewise.
Add support for debugging core files generated by binaries in
Large Memory model.
(rs6000coff_core_p): If Large Memory Model is used, then the .data
segment should start from BDATAORG which has been defined in the
system header files.

Prevent overflowing the selected_cpu_name buffer in the ARM assembler.

* config/tc-arm.c (selected_cpu_name): Increase length of array to
accomodate "Samsung Exynos M1".
(arm_parse_cpu): Add assertion and length check to prevent
overfilling selected_cpu_name.

xfail pr19161 test on hppa-linux

HPPA linux needs libgcc.a for millicode routine $$dyncall.

* ld-gc/pr19161.d: xfail hppa-*-*.

Fix access_to_packed_array.exp typos/errors

Running ./gdb.ada/access_to_packed_array.exp ...
ERROR: tcl error sourcing ./gdb.ada/access_to_packed_array.exp.
ERROR: extra characters after close-quote
    while executing
"gdb_test "print pack.a" "\\(0 => 1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\)")"
    (file "./gdb.ada/access_to_packed_array.exp" line 29)
    invoked from within
"source ./gdb.ada/access_to_packed_array.exp"
    ("uplevel" body line 1)
    invoked from within
"uplevel #0 source ./gdb.ada/access_to_packed_array.exp"
    invoked from within
"catch "uplevel #0 source $test_file_name""

Unrelated to the typos I have changed the print expectations s/"x"/" = x"/
as for example expectation "3" should not match " = 43".

2015-10-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.ada/access_to_packed_array.exp: Fix typos erroring the testfile.

symtab.h (struct general_symbol_info> <ada_mangled>: Update comment.

gdb/ChangeLog:

* symtab.h (struct general_symbol_info> <ada_mangled>: Update comment.

Evaluate __start_* and __stop_* symbol PROVIDE expressions early

Makes these symbols defined before bfd_elf_size_dynamic_sections, to
avoid horrible hacks elsewhere.  The exp_fold_tree undefweak change
is necessary to define undefweak symbols early too.  The comment was
wrong.  PROVIDE in fact defines undefweak symbols, via
bfd_elf_record_link_assignment.

PR ld/19175
* ldlang.c (lang_insert_orphan): Evaluate __start_* and __stop_*
symbol PROVIDE expressions.
* ldexp.c (exp_fold_tree_1 <etree_provide>): Define undefweak
references.

target.c: Add a cast and change a type

Fixes some errors in C++ build.

gdb/ChangeLog:

* target.c (memory_xfer_partial): Change type of buf to gdb_byte
pointer.
(simple_search_memory): Cast return of memmem.

stap-probe.c: Add casts

gdb/ChangeLog:

* stap-probe.c (handle_stap_probe): Add (const char *) casts.

ctf_xfer_partial: Return TARGET_XFER_E_IO instead of -1 on error

Use the enum value instead of the corresponding int value.

gdb/ChangeLog:

* ctf.c (ctf_xfer_partial): Return TARGET_XFER_E_IO instead of
-1 on error.

Automatic date update in version.in

Check symbol defined by assignment in linker script

Symbol symbol defined by an assignment in a linker script has type
bfd_link_hash_new.  elf_i386_convert_load and elf_x86_64_convert_load
should check bfd_link_hash_new to see if a symbol is defined by a linker
script.

bfd/

PR ld/19175
* elf32-i386.c (elf_i386_convert_load): Check bfd_link_hash_new
instead of calling bfd_link_get_defined_symbol.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise.  Skip
relocation overflow for bfd_link_hash_new.
* linker.c (bfd_link_get_defined_symbol): Removed.
* bfd-in2.h: Regenerated.

ld/testsuite/

PR ld/19175
* ld-i386/i386.exp: Run pr19175.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr19175.d: New file.
* ld-i386/pr19175.s: Likewise.
* ld-i386/pr19175.t: Likewise.
* ld-x86-64/pr19175.d: Likewise.
* ld-x86-64/pr19175.s: Likewise.
* ld-x86-64/pr19175.t: Likewise.

PR symtab/17391 gdb internal error: assertion fails in regcache.c:178

gdb/ChangeLog:

* dwarf2-frame.c (dwarf2_restore_rule): Call dwarf_reg_to_regnum
instead of gdbarch_dwarf2_reg_to_regnum.
(dwarf2_frame_cache): Ditto.
(read_addr_from_reg): Call dwarf_reg_to_regnum_or_error instead of
gdbarch_dwarf2_reg_to_regnum.
(get_reg_value): Ditto.
(dwarf2_fetch_cfa_info): Ditto.
(dwarf2_frame_prev_register): Ditto.
* dwarf2loc.c: #include "complaints.h".
(dwarf_expr_read_addr_from_reg): Call dwarf_reg_to_regnum_or_error
instead of gdbarch_dwarf2_reg_to_regnum.
(dwarf_expr_get_reg_value): Ditto.
(read_pieced_value): Ditto.
(write_pieced_value): Ditto.
(dwarf2_evaluate_loc_desc_full): Ditto.
(dwarf_reg_to_regnum): New function.
(throw_bad_regnum_error): New function.
(dwarf_reg_to_regnum_or_error): Renamed from
dwarf2_reg_to_regnum_or_errorChange to take a ULONGEST regnum.
All callers updated.  Call throw_bad_regnum_error.
(locexpr_regname): Improve text of bad register number.
* dwarf2loc.h (dwarf_reg_to_regnum): Declare.
(dwarf_reg_to_regnum_or_error): Update prototype.
* dwarf2expr.c: #include "dwarf2loc.h".
(dwarf_block_to_sp_offset): Call dwarf_reg_to_regnum instead of
gdbarch_dwarf2_reg_to_regnum.
* gdbarch.sh (dwarf2_reg_to_regnum): Add comment.
* gdbarch.h: Regenerate.
* amd64-tdep.c (amd64_dwarf_reg_to_regnum): Remove warning for bad
register.
* avr-tdep.c (avr_dwarf_reg_to_regnum): Ditto.
* cris-tdep.c (cris_dwarf2_reg_to_regnum): Ditto.
* bfin-tdep.c (bfin_reg_to_regnum): Fix error checking.
* hppa-linux-tdep.c (hppa_dwarf_reg_to_regnum): Improve error checking.
Remove warning for bad register.
* hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Ditto.
* i386-tdep.c (i386_svr4_dwarf_reg_to_regnum): Renamed from
i386_svr4_reg_to_regnum.  Return -1 for bad registers.
(i386_svr4_reg_to_regnum): New function.
(i386_gdbarch_init): Update call to set_gdbarch_dwarf2_reg_to_regnum.
* microblaze-tdep.c (microblaze_dwarf2_reg_to_regnum): Don't assert
on bad registers, return -1.
* msp430-tdep.c (msp430_dwarf2_reg_to_regnum): Improve error checking.
Remove warning for bad register.
* nios2-tdep.c: Add static assert for NIOS2_NUM_REGS.
(nios2_dwarf_reg_to_regnum): Fix off-by-one error.
Remove warning for bad register.  Return -1 for bad register.
* rl78-tdep.c (rl78_dwarf_reg_to_regnum): Don't flag an internal error
for bad register, return -1.
* rx-tdep.c (rx_dwarf_reg_to_regnum): Ditto.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Fix error result.
* mep-tdep.c (mep_debug_reg_to_regnum): Ditto.
* mips-tdep.c (mips_stab_reg_to_regnum): Ditto.
(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Ditto.
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Remove warning
for bad regs.
* xtensa-tdep.c (xtensa_reg_to_regnum): Remove internal error for
bad regs.  Fix error result.
* stabsread.c (stab_reg_to_regnum): Watch for negative regno.
(reg_value_complaint): Update complaint text.
* mdebugread.c (reg_value_complaint): New function.
(mdebug_reg_to_regnum): Rewrite to watch for bad reg numbers.

gdb/testsuite/ChangeLog:

* lib/dwarf.exp (_location): Add support for DW_OP_regx.
* gdb.dwarf2/bad-regnum.c: New file.
* gdb.dwarf2/bad-regnum.exp: New file.

PR python/18938: source -s foo.py with foo.py a symlink to foo.notpy fails

gdb/ChangeLog:

PR python/18938
* cli/cli-cmds (source_script_fron_sctream): New arg file_to_open.
All callers updated.

gdb/testsuite/ChangeLog:

* gdb.python/python.exp: Add test for symlink from .py file to .notpy
file.

Print address map in output of "mt print psymbols"

gdb/ChangeLog:

* psymtab.c (struct dump_psymtab_addrmap_data): Define.
(dump_psymtab_addrmap_1, dump_psymtab_addrmap): New functions.
(maintenance_print_psymbols): Print address map.

Move __SIGRTMIN.

gdb/ChangeLog:

* nat/linux-nat.h (__SIGRTMIN): Move here from gdbserver/linux-low.c.

gdb/gdbserver/ChangeLog:

* linux-low.c (__SIGRTMIN): Move to nat/linux-nat.h.

musl: Move W_STOPCODE to common/gdb_wait.h.

gdb/ChangeLog:

* common/gdb_wait.h (W_STOPCODE): Define, moved here from
gdbserver/linux-low.c.
(WSETSTOP): Simplify.

gdb/gdbserver/ChangeLog:

* linux-low.c (W_STOPCODE): Moved to common/gdb_wait.h.

Add some casts for building on musl.

gdb/ChangeLog:

* linux-thread-db.c (find_new_threads_callback): Cast ti.ti_tid to
unsigned long for debug_printf.
(thread_db_pid_to_str): Ditto.

gdb/gdbserver/ChangeLog:

* thread-db.c (find_one_thread): Cast ti.ti_tid to unsigned long
for debug_printf.
(attach_thread, find_new_threads_callback): Ditto.

guile: Simplify ioscm_make_gdb_stdio_port

As pointed out by Pedro, it's clearer to do it this way.  We can trust
that scm_mode_bits won't try to modify our string, even though it takes
a non-const char *.

gdb/ChangeLog:

* guile/scm-ports.c (ioscm_make_gdb_stdio_port): Do not pass a
local char array to scm_mode_bits, use a cast instead.

tui: Simplify tui_alloc_content

I stumbled upon this while doing some cxx-conversion work.  Since the
x-family alloc functions throw on failure, it is useless to test their
result for failure.  The else branch of != NULL is basically dead code.

I changed the type of element_block_ptr to struct tui_win_element, which
seems obvious (this is actually what raised the flag, casting the result
of xmalloc to struct tui_win_element* wouldn't work).

gdb/ChangeLog:

* tui/tui-data.c (tui_alloc_content): Don't check xmalloc
result.  Change type of element_block_ptr.  Change allocation to
use XNEWVEC.

Properly convert address load of __start_XXX/__stop_XXX

Since __start_XXX and __stop_XXX symbols aren't defined when address
load is being converted, we need to check if there is an XXX output
section to get their section and value.  This patch adds a new function,
bfd_link_get_defined_symbol, to search for the XXX output section to
check if __start_XXX and __stop_XXX symbols are defined.

bfd/

PR ld/19171
* elf32-i386.c (elf_i386_convert_load): Call
bfd_link_get_defined_symbol to check if a symbol is defined.
* elf64-x86-64.c (elf_x86_64_convert_load): Call
bfd_link_get_defined_symbol to get defined symbol section and
value.
* linker.c (bfd_link_get_defined_symbol): New function.
* bfd-in2.h: Regenerated.

ld/testsuite/

PR ld/19171
* ld-i386/lea1.s: Add tests for address load of __start_XXX
and __stop_XXX.
* ld-i386/mov1.s: Likewise.
* ld-x86-64/lea1.s: Likewise.
* ld-x86-64/mov1.s: Likewise.
* ld-i386/lea1a.d: Updated.
* ld-i386/lea1b.d: Likewise.
* ld-i386/lea1c.d: Likewise.
* ld-i386/mov1a.d: Likewise.
* ld-i386/mov1b.d: Likewise.
* ld-x86-64/lea1a.d: Likewise.
* ld-x86-64/lea1b.d: Likewise.
* ld-x86-64/lea1c.d: Likewise.
* ld-x86-64/lea1d.d: Likewise.
* ld-x86-64/lea1e.d: Likewise.
* ld-x86-64/lea1f.d: Likewise.
* ld-x86-64/mov1a.d: Likewise.
* ld-x86-64/mov1b.d: Likewise.
* ld-x86-64/mov1c.d: Likewise.
* ld-x86-64/mov1d.d: Likewise.

Do not pass NULL for the string in catch_errors

I caught a segmentation fault while running gdb.reverse/sigall-reverse.exp,
in a mingw32 GDB, in this code path. It boils down to the code trying to
strlen () a NULL pointer. I tracked things down and it looks like
record_full_message_wrapper_safe is the only offender.

gdb/ChangeLog:

2015-10-26  Luis Machado  <lgustavo@codesourcery.com>

* record-full.c (record_full_message_wrapper_safe): Pass empty string to
catch_errors call instead of NULL.

Fix constness problem in ioscm_make_gdb_stdio_port

ioscm_make_gdb_stdio_port passes const char pointers (literal strings) to
scm_mode_bits, which takes a non-const char pointer.  Ideally, we would
change scm_mode_bits to take a const char pointer, but it's not part of
an API we control.

Instead, it's easy enough to build the string to pass to scm_mode_bits in
a (non-const) char array and pass that.

gdb/ChangeLog:

* guile/scm-ports.c (ioscm_make_gdb_stdio_port): Pass non-const
char pointer to scm_mode_bits.

symtab.c: Add cast

gdb/ChangeLog:

* symtab.c (default_make_symbol_completion_list_break_on_1): Add
cast.

gdbscm_memory_port_write: use local variable to avoid adding casts

By having a local variable of type (const gdb_byte *), we can avoid adding
two casts.

gdb/ChangeLog:

* guile/scm-ports.c (gdbscm_memory_port_write): Declare new
"data" local variable and use it.

scm-symbol.c: Add (domain_enum) casts

We currently pass integers as domain_enums to lookup_symbol.  The
most obvious fix is to add casts there.

I first thought of changing the type of the domain variables to
domain_enum.  However, because we pass a pointer to them to
gdbscm_parse_function_args, which expects them to be integers (because
of the format string), I don't think it would be correct.  If the enum
does not have the same size as an int, gdbscm_parse_function_args could
write past the memory of domain, overwriting something else on the
stack.

gdb/ChangeLog:

* guile/scm-symbol.c (gdbscm_lookup_global_symbol): Add
domain_enum cast.
(gdbscm_lookup_symbol): Likewise.

Automatic date update in version.in

Fix compile.exp error message expectation

commit cdaec3f3e7ea9118204f0e579bd3257234fbae63
Author: Luis Machado <lgustavo@codesourcery.com>
Date:   Thu Aug 27 02:00:16 2015 -0300
    Mention language in compile error message

regressed:

-PASS: gdb.compile/compile.exp: compile code globalvar
+FAIL: gdb.compile/compile.exp: compile code globalvar

Update the expected message.

gdb/testsuite/ChangeLog
2015-10-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.compile/compile.exp (compile code globalvar): Update expectation
for a change by "Mention language in compile error message".

Re-apply change for handling non-local references in nested functions.

gdb/ChangeLog:

* d-exp.y: Remove an obsolete comment and propagate the block
information to the produced expression.

tui-data.c: Remove unnecessary casts

The (void *) casts make the build fail in C++ mode and are unnecessary.

gdb/ChangeLog:

* tui/tui-data.c (tui_add_to_source_windows): Remove void *
cast.
(tui_add_content_elements): Likewise.

cli-setshow.c: Constify variable

Fixes:

/home/simark/src/binutils-gdb/gdb/cli/cli-setshow.c:390:13: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
  p = strchr (arg, ' ');
             ^
gdb/ChangeLog:

* cli/cli-setshow.c (do_set_command): Constify p.

Automatic date update in version.in

Replace (void *) cast with (gdb_byte *)

Fixes:

/home/simark/src/binutils-gdb/gdb/nat/linux-ptrace.c:207:6: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
   pc = (void *) (uintptr_t) l;
         ^

gdb/ChangeLog:

* nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Replace
(void *) cast with (gdb_byte *).

proc-service.c: Add (gdb_byte *) cast

A cast here is necessary, just as it's necessary in ps_pdwrite just
below.  The type of buf can't be changed, since it's fixed in the ps_pd*
API.

gdb/ChangeLog:

* proc-service.c (ps_pdread): Add cast.

sparc64-tdep.c: Don't assign using memcpy return

This:

  valbuf = memcpy (buf, valbuf, len);

causes a build failure in C++, because memcpy returns the value of
"buf" as a void *.  Instead of adding a cast, we can just do the
assignment separately.

gdb/ChangeLog:

* sparc64-tdep.c (sparc64_store_arguments): Split assignment of
valbuf.

ia64-tdep.c: Remove (void *) casts

Remove these (void *) casts, which cause a build failure in C++ mode.

gdb/ChangeLog:

* ia64-tdep.c (ia64_pseudo_register_write): Remove cast.
(ia64_push_dummy_call): Remove cast and change type of "to" to
array of gdb_byte.

Automatic date update in version.in

Add mmap casts in linux-btrace.c

gdb/ChangeLog:

* linux-btrace.c (linux_enable_pt): Add cast to mmap return.

Add cast to observer.sh

gdb/ChangeLog:

* observer.h (observer_${event}_notification_stub): Add cast.

Remove set_breakpoint_data definition in GDBServer.

This patch removes the now unused set_breakpoint_data function from mem_break.h

gdb/gdbserver/ChangeLog:

* mem-break.h (set_breakpoint_data): Remove.

Fix nto,spu and win32 builds of GDBServer.

This patch fixes the build that was broken by :
https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html

It implements the sw_breakpoint_from_kind operation on these targets and removes
the calls to set_breakpoint_data.

Compiliation tested on win32.

Not tested : nto, spu.

gdb/gdbserver/ChangeLog:

* nto-low.c (nto_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize.
(initialize_low): Remove set_breakpoint_data call.
* spu-low.c (spu_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Iniitalize.
(initialize_low): Remove set_breakpoint_data call.
* win32-low.c (win32_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize.
(initialize_low): Remove set_breakpoint_data call.

Refactor default_breakpoint_kind_from_pc to be used by all targets in GDBServer.

This patch moves default_breakpoint_kind_from_pc to target.c and creates a macro
so that all targets can easily use it.

This allows the breakpoint_kind_from_pc operation to be left unimplemented in
targets that do not need it.

This is preparation to fix the win32/nto/spu build that was broken by this
patch: https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html

No regression on Ubuntu 14.04 x86-64 with gdbserver-{native-extended}

gdb/gdbserver/ChangeLog:

* linux-low.c (default_breakpoint_kind_from_pc): Move to target.c.
* mem-break.c (set_breakpoint_at): Use target_breakpoint_kind_from_pc.
* target.c (default_breakpoint_kind_from_pc): Moved from linux-low.c
* target.h (target_breakpoint_kind_from_pc): New macro.

Handle __start_* and __stop_* symbols in --gc-sections

PR ld/11133
PR ld/19161
PR ld/19167
* elflink.c (_bfd_elf_gc_mark_hook): Delete code handling __start_*
and __stop_* symbol refs.
(_bfd_elf_gc_mark_rsec): Add start_stop parameter.  Handle __start_*
and __stop_* symbol refs here..
(_bfd_elf_gc_mark_reloc): ..and here.
* elf-bfd.h (_bfd_elf_gc_mark_hook): Update prototype.
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Update
_bfd_elf_gc_mark_rsec call.

Add a test for PR ld/19167

PR ld/19167
* ld-gc/gc.exp: Run pr19167 test.
* ld-gc/pr19167.d: New file.
* ld-gc/pr19167a.s: Likewise.
* ld-gc/pr19167b.s: Likewise.

Initialize field insn_count correctly

This patch initialize dsd.insn_count, otherwise, it triggers the assert
below on testings we did recently.

gdb:

2015-10-23  Yao Qi  <yao.qi@linaro.org>

* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Set
dsd.insn_count to zero.

Automatic date update in version.in

Re: Always keep sections marked with SEC_KEEP

Revert bba037e0, it breaks the gc-sections model.  Instead fix the
underlying problem which is that _bfd_elf_gc_mark_hook is too late to
be setting SEC_KEEP.

PR ld/11133
PR ld/19161
* elflink.c (elf_gc_sweep): Revert last patch.
(_bfd_elf_gc_mark_hook): Don't set SEC_KEEP here.

Always keep sections marked with SEC_KEEP

SEC_KEEP check in elf_gc_sweep was missing in commit:

commit bde6f3eb6dff94cea1d471e15c6154d55d49820f
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Fri Jan 8 01:43:23 2010 +0000

    Set SEC_KEEP on section XXX for undefined __start_XXX/__stop_XXX

    bfd/

    2010-01-07  H.J. Lu  <hongjiu.lu@intel.com>

      PR ld/11133
      * elflink.c (_bfd_elf_gc_mark_hook): Check section XXX for
      undefined __start_XXX/__stop_XXX in all input files and set
      SEC_KEEP.

This patch adds SEC_KEEP check to elf_gc_sweep.

bfd/

PR ld/19161
* elflink.c (elf_gc_sweep): Always keep sections marked with
SEC_KEEP.

ld/testsuite/

PR ld/19161
* ld-gc/gc.exp: Run pr19161 test.
* ld-gc/pr19161-1.c: New file.
* ld-gc/pr19161-2.c: Likewise.
* ld-gc/pr19161.d: Likewise.

garbage collect gdb/infrun.c:stop_after_trap

No longer used anywhere.

gdb/ChangeLog:
2015-10-22  Pedro Alves  <palves@redhat.com>

* infrun.c (stop_after_trap): Delete.
(clear_proceed_status, handle_signal_stop, struct
infcall_control_state, save_infcall_control_state)
(restore_infcall_control_state): Remove references to
stop_after_trap.

Fix inconsistent breakpoint kinds between breakpoints and tracepoints in GDBServer.

This patch fixes a regression introduced by :
https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html

Tests : gdb.trace/trace-break.exp and gdb.trace/trace-mt.exp would fail on x86
with gdbserver-{native,extended}.

Before this patch, the breakpoint kind set by GDB with a Z packet and the one
set in the case of a tracepoint would be inconsistent on targets that did not
implement breakpoint_kind_from_pc. On x86 for example a breakpoint set by GDB
would have a kind of 1 but a breakpoint set by a tracepoint would have a kind of
0.

This created a missmatch when trying to insert a tracepoint and a breakpoint at
the same location. One of the two breakpoints would be removed with debug
message : "Inconsistent breakpoint kind".

This patch fixes the issue by changing the default 0 breakpoint kind to be
the size of the breakpoint according to sw_breakpoint_from_kind.

The default breakpoint kind must be the breakpoint length to keep consistency
between breakpoints set via GDB and the ones set internally by GDBServer.

No regression on Ubuntu 14.04 x86-64 with gdbserver-{native-extended}

gdb/gdbserver/ChangeLog:

* linux-low.c (default_breakpoint_kind_from_pc): New function.
(linux_breakpoint_kind_from_pc): Use default_breakpoint_kind_from_pc for
the default breakpoint kind.

Add cast in python.c

gdb/ChangeLog:

* python/python.c (_initialize_python): Add cast.

Add cast in nto-tdep.c

gdb/ChangeLog:

* nto-tdep.c (nto_inferior_data): Add cast.

gdb/Windows: use windows_wait/windows_resume directly in initial startup

Explation below based on what Joel wrote at:

  https://sourceware.org/ml/gdb-patches/2015-10/msg00274.html

The merge async/sync code paths patch broke attaching on Windows.

This is what we observe, after attaching to any process.  At first, it
seems like everything worked fine, since the process stops, and we get
the prompt back:

    (gdb) att 3156
    Attaching to program `C:\[...]\foo.exe', process 3156
    [New Thread 3156.0xcd8]
    [New Thread 3156.0xfe4]
    0x7770000d in ntdll!DbgBreakPoint () from C:\Windows\SysWOW64\ntdll.dll
    (gdb)

However, enter any commands at all, and GDB appears to be hanging.
For instance:

    (gdb) set lang ada
    [nothing happens]

Despite appearances, GDB is not reading from the prompt.  It is
blocked waiting for an event from the inferior.  And since our
inferior is stopped, there aren't going to be any events to read.

In chronological order, what happens is that windows_attach calls
do_initial_windows_stuff, which performs the inferior creation,
and repeatedly waits until we get the first SIGTRAP:

  while (1)
    {
      stop_after_trap = 1;
      wait_for_inferior ();
      tp = inferior_thread ();
      if (tp->suspend.stop_signal != GDB_SIGNAL_TRAP)
        resume (tp->suspend.stop_signal);
      else
        break;
    }

The call to wait_for_inferior triggers a call to do_target_wait to get
the event, followed by handle_inferior_event to process it.  However,
because the first couple of events are "spurious" events, GDB resumes
the execution, and prepares the inferior to wait again:

    case TARGET_WAITKIND_SPURIOUS:
      [...]
      resume (GDB_SIGNAL_0);
      prepare_to_wait (ecs);

And prepare_to_wait just does...

  ecs->wait_some_more = 1;
  if (!target_is_async_p ())
    mark_infrun_async_event_handler ();

... which as a result sets the infrun_async_event_handler "ready"
flag to 1.

We get a couple of spurious events before we get the initial SIGTRAP,
at which point we exit the "while (1)" loop above, after which we
reach the end of the attach_command, followed by the normal
end-of-command processing (normal_stop, bp handling, printing the GDB
prompt), back finally to the root of the event loop.

Notice that, at this point, nothing has unset the "ready" flag for the
infrun_async_event_handler.  So, when another cycle of
gdb_do_one_event from the event loop, we eventually call
check_async_event_handlers, which finds that the infrun async event
handler is "ready", and therefore calls it's associated "proc"
callback, which does...

      inferior_event_handler (INF_REG_EVENT, NULL);

... triggering a blocking call to target_wait, thus hanging forever.

The fix is to use windows_wait and windows_resume directly, similarly
to gdbserver.  This will also allow getting rid of 'stop_after_trap'.

gdb/ChangeLog:
2015-10-22  Pedro Alves  <palves@redhat.com>

* windows-nat.c (do_initial_windows_stuff): Rewrite loop using
windows_wait and windows_resume directly instead of
wait_for_inferior and resume.

Add support for MSP430 silicon errata to the assembler.

* config/tc-msp430.c (PUSH_1X_WORKAROUND): Delete.
(OPTION_SILICON_ERRATA): Define.
(OPTION_SILICON_WARN): Define.
(md_parse_opton): Handle silicon errata options.
(md_longopts): Add silicon errata options.
(ms_show_usage): Report silicon errata options.
(msp430_srcoperand): Handle silicon errata.
(msp430_operands): Likewise. Improve nop insertion.
(msp430_fix_adjustable): Update warning generation.
* doc/c-msp430.texi: Document silicon errata options.

tests * gas/msp430/errata_fixes.s: New test source file.
* gas/msp430/errata_fixes.d: New test control file.
* gas/msp430/errata_warns.s: New test source file.
* gas/msp430/errata_warns.d: New test control file.
* gas/msp430/errata_warns.l: New test message file.
* gas/msp430/msp430.exp: Run the new tests.
* gas/msp430/bad.l: Update expected warning messages
* gas/msp430/msp430.exp: Run the new tests.

Properly check --enable-compressed-debug-sections={yes,all}

gas/

* configure.ac: Properly check
--enable-compressed-debug-sections={yes,all}.
* configure: Regenerated.

ld/

* configure.ac: Properly check
--enable-compressed-debug-sections={yes,all}.
* configure: Regenerated.

bfd/mmo.c: handle "objcopy --extract-symbols" generating and reading back.

bfd:
* mmo.c (struct mmo_data_struct): New members
symbol_consistency_override_calculated and ignore_symbol_consistency.
(mmo_section_has_contents, mmo_ignore_symbol_consistency): New
functions.
(mmo_create_symbol): Check with mmo_ignore_symbol_consistency if to
report an error for unexpected value of Main.
(mmo_write_symbols_and_terminator): Similar.

Allow mmix-knuth-mmixware adjustments to objcopy --extract-symbols test.

* ld-scripts/script.exp (extract_symbol_test): Allow nm output of
objcopy --extract-symbols result to differ from original on
mmix-knuth-mmixware.

binutils/objcopy.c (setup_section): missing extract_symbol part

* objcopy.c (setup_section): Don't omit bfd_copy_private_bfd_data
call when extract_symbol.

xtensa: Fix implicit enum conversions

XTREG is used with raw numbers, like:

...
  XTREG( 78,312,32, 4, 4,0x02d7,0x0007,-2, 2,0x1000,excsave7,    0,0,0,0,0,0)
  XTREG( 79,316, 8, 4, 4,0x02e0,0x0007,-2, 2,0x1000,cpenable,    0,0,0,0,0,0)
  XTREG( 80,320,22, 4, 4,0x02e2,0x000b,-2, 2,0x1000,interrupt,   0,0,0,0,0,0)
  XTREG( 81,324,22, 4, 4,0x02e2,0x000d,-2, 2,0x1000,intset,      0,0,0,0,0,0)
...

So just add the explicit cast to the macro.

In file included from /home/pedro/gdb/mygit/src/gdb/xtensa-config.c:25:0:
/home/pedro/gdb/mygit/src/gdb/xtensa-tdep.h:289:2: error: invalid conversion from â€˜int’ to â€˜call_abi_t’ [-fpermissive]
  }
  ^

gdb/ChangeLog:

* xtensa-tdep.h (XTREG): Add casts.
(XTREG_END): Likewise.

solib-spu: Add gdb_byte* cast

Fixes this error:

/home/simark/src/binutils-gdb/gdb/solib-spu.c: In function â€˜file_ptr spu_bfd_iovec_pread(bfd*, void*, void*, file_ptr, file_ptr)’:
/home/simark/src/binutils-gdb/gdb/solib-spu.c:299:55: error: invalid conversion from â€˜void*’ to â€˜gdb_byte* {aka unsigned char*}’ [-fpermissive]
   ret = target_read_memory (addr + offset, buf, nbytes);
                                                       ^
In file included from /home/simark/src/binutils-gdb/gdb/target.h:65:0,
                 from /home/simark/src/binutils-gdb/gdb/exec.h:23,
                 from /home/simark/src/binutils-gdb/gdb/gdbcore.h:29,
                 from /home/simark/src/binutils-gdb/gdb/solib-spu.c:23:
/home/simark/src/binutils-gdb/gdb/target/target.h:35:12: note:   initializing argument 2 of â€˜int target_read_memory(CORE_ADDR, gdb_byte*, ssize_t)’
 extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr,

gdb/ChangeLog:

* solib-spu.c (spu_bfd_iovec_pread): Add (gdb_byte *) cast.

rs6000: Add cast for int to enum conversion

Fixes this error:

/home/pedro/gdb/mygit/src/gdb/rs6000-tdep.c:3091:1: error: invalid conversion from â€˜int’ to â€˜bfd_architecture’ [-fpermissive]
 };
 ^
/home/pedro/gdb/mygit/src/gdb/rs6000-tdep.c: In function â€˜void powerpc_set_vector_abi(char*, int, cmd_list_element*)’:
/home/pedro/gdb/mygit/src/gdb/rs6000-tdep.c:6063:28: error: invalid conversion from â€˜int’ to â€˜powerpc_vector_abi’ [-fpermissive]
  powerpc_vector_abi_global = vector_abi;
                            ^

gdb/ChangeLog:

* rs6000-tdep.c (variants): Add (enum bfd_architecture) cast.

mips: fix void*/gdb_byte* compilation errors

The error in mips64_linux_get_longjmp_target is fixed by changing "buf"
to be a gdb_byte*, as usual.  supply_32bit_reg and mips64_fill_gregset
do some more complicated things however, so it's safer just to add the
explicit cast and avoid changing the code too much.

gdb/ChangeLog:

* mips-linux-tdep.c (mips64_linux_get_longjmp_target): Change type of
buf to gdb_byte*.
(supply_32bit_reg): Add cast.
(mips64_fill_gregset): Likewise.

Handle --enable-compressed-debug-sections=ld,gas

gas/

PR gas/19109
* configure.ac: Handle --enable-compressed-debug-sections=*,gas,*.
* configure: Regenerated.

ld/

PR gas/19109
* configure.ac: Handle --enable-compressed-debug-sections=*,ld,*.
* configure: Regenerated.

Gold: Don't fail on R_X86_64_[REX_]GOTPCRELX relocations

This patch updates gold to treat the R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX relocations proposed in

https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0

the same as R_X86_64_GOTPCREL.  FIXME: Gold should perform the
transformations as suggested.

elfcpp/

* x86_64.h (R_X86_64_GOTPCRELX): New.
(R_X86_64_REX_GOTPCRELX): Likewise.

gold/

* x86_64.cc (Target_x86_64<size>::Scan::get_reference_flags):
Treat R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX the same
as R_X86_64_GOTPCREL.
(Target_x86_64<size>::Scan::local): Likewise.
(Target_x86_64<size>::Scan::possible_function_pointer_reloc):
Likewise.
(Target_x86_64<size>::Scan::global): Likewise.
(Target_x86_64<size>::Relocate::relocate): Likewise.
(Target_x86_64<size>::Relocatable_size_for_reloc::get_size_for_reloc):
Likewise.

Gold: Don't fail on R_386_GOT32X relocation

This patch updates gold to treat the R_386_GOT32X relocation proposed in

https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I

the same as R_386_GOT32.  FIXME: Gold should perform the transformations
as suggested.

elfcpp/

* i386.h (R_386_GOT32X): New.

gold/

* i386.cc (Target_i386::Scan::get_reference_flags(): Treat
R_386_GOT32X the same as R_386_GOT32.
(Target_i386::Scan::local): Likewise.
(Target_i386::Scan::possible_function_pointer_reloc): Likewise.
(Target_i386::Scan::global): Likewise.
(Target_i386::Relocate::relocate): Likewise.
(Target_i386::Relocatable_size_for_reloc::get_size_for_reloc):
Likewise.

Add "-z call-nop=PADDING" option to ld

The ld linker can transform indirect call to a locally defined function,
foo, via its GOT slot, to either "NOP call foo" or "call foo NOP" where
NOP is a 1-byte NOP padding.  This patch adds a "-z call-nop=PADDING"
option to x86 ld to control 1-byte NOP padding for x86 call instruction.
PADDING is one of prefix-addr, prefix-nop, suffix-nop, prefix-NUMBER or
suffix-NUMBER.

bfd/

* elf32-i386.c (elf_i386_convert_load): Use call_nop_byte and
check call_nop_as_suffix for 1-byte NOP padding to pad call.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise.

include/

* bfdlink.h (bfd_link_info): Add call_nop_as_suffix and
call_nop_byte.

ld/

* ld/ld.texinfo: Document "-z call-nop=PADDING" option.
* emulparams/call_nop.sh: New file.
* emulparams/elf_i386_be.sh: Source
${srcdir}/emulparams/call_nop.sh.
* emulparams/elf_i386_chaos.sh: Likewise.
* emulparams/elf_i386_ldso.sh: Likewise.
* emulparams/elf_i386_vxworks.sh: Likewise.
* emulparams/elf_iamcu.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.call_nop_byte if $CALL_NOP_BYTE isn't empty.

ld/testsuite/

* ld-i386/call3.s: New file.
* ld-i386/call3a.d: Likewise.
* ld-i386/call3b.d: Likewise.
* ld-i386/call3c.d: Likewise.
* ld-i386/call3d.d: Likewise.
* ld-i386/call3e.d: Likewise.
* ld-i386/call3f.d: Likewise.
* ld-i386/call3g.d: Likewise.
* ld-i386/call3h.d: Likewise.
* ld-i386/load1-nacl.d: Likewise.
* ld-x86-64/call1.s: Likewise.
* ld-x86-64/call1a.d: Likewise.
* ld-x86-64/call1b.d: Likewise.
* ld-x86-64/call1c.d: Likewise.
* ld-x86-64/call1d.d: Likewise.
* ld-x86-64/call1e.d: Likewise.
* ld-x86-64/call1f.d: Likewise.
* ld-x86-64/call1g.d: Likewise.
* ld-x86-64/call1h.d: Likewise.
* ld-x86-64/call1i.d: Likewise.
* ld-x86-64/load1a-nacl.d: Likewise.
* ld-x86-64/load1b-nacl.d: Likewise.
* ld-x86-64/load1c-nacl.d: Likewise.
* ld-x86-64/load1d-nacl.d: Likewise.

Add R_X86_64_[REX_]GOTPCRELX support to gas and ld

This patch adds support for the R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX relocations proposed in

https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0

to gas and ld.  It updates gas to generate R_X86_64_GOTPCRELX,
R_X86_64_REX_GOTPCRELX if there is a REX prefix, relocation for memory
operand, foo@GOTPCREL(%rip).  With the locally defined symbol, foo, we
convert

  mov foo@GOTPCREL(%rip), %reg

to

   lea foo(%rip), %reg

and convert

   call/jmp *foo@GOTPCREL(%rip)
to

   nop call foo/jmp foo nop

When PIC is false, convert

   test %reg, foo@GOTPCREL(%rip)
to

test $foo, %reg

and convert

   binop foo@GOTPCREL(%rip), %reg

to

   binop $foo, %reg

where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.

bfd/

* elf64-x86-64.c: Include opcode/i386.h.
(x86_64_elf_howto_table): Add R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(R_X86_64_standard): Replace R_X86_64_PLT32_BND with
R_X86_64_REX_GOTPCRELX.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_x86_64_check_relocs): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.  Replace need_convert_mov_to_lea with
need_convert_load.
(elf_x86_64_gc_sweep_hook): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_convert_mov_to_lea): Renamed to ...
(elf_x86_64_convert_load): This.  Replace need_convert_mov_to_lea
with need_convert_load.  Support R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX transformations.
* reloc.c (BFD_RELOC_X86_64_GOTPCRELX): New.
(BFD_RELOC_X86_64_REX_GOTPCRELX): Likewise.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.

gas/

* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
(tc_gen_reloc): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
true for BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.

gas/testsuite/

* gas/i386/i386.exp: Run x86-64-gotpcrel.
* gas/i386/x86-64-gotpcrel.d: New file.
* gas/i386/x86-64-gotpcrel.s: Likewise.
* gas/i386/ilp32/x86-64-gotpcrel.d: Likewise.
* gas/i386/x86-64-localpic.d: Replace R_X86_64_GOTPCREL with
R_X86_64_REX_GOTPCRELX.
* gas/i386/ilp32/x86-64-localpic.d: Likewise.

include/elf/

* x86-64.h (R_X86_64_GOTPCRELX): New.
(R_X86_64_REX_GOTPCRELX): Likewise.

ld/testsuite/

* ld-ifunc/ifunc-5r-local-x86-64.d: Replace R_X86_64_GOTPCREL
with R_X86_64_REX_GOTPCRELX.
* ld-x86-64/plt-main1.rd: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
* ld-x86-64/gotpcrel1.dd: New file.
* ld-x86-64/gotpcrel1.out: Likewise.
* ld-x86-64/gotpcrel1a.S: Likewise.
* ld-x86-64/gotpcrel1b.c: Likewise.
* ld-x86-64/gotpcrel1c.c: Likewise.
* ld-x86-64/gotpcrel1d.S: Likewise.
* ld-x86-64/load1.s: Likewise.
* ld-x86-64/load1a.d: Likewise.
* ld-x86-64/load1b.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/x86-64.exp: Run load1a, load1b, load1c and load1d
tests.  Run gotpcrel1 test.

Add R_386_GOT32X support to gas and ld

This patch adds support for the R_386_GOT32X relocation proposed in

https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I

to gas and ld.  It updates gas to generate R_386_GOT32X relocation for
memory operand, foo@GOT[(%reg)].  We must encode "mov foo@GOT, %eax"
with the 0x8b opcode, instead of the 0xb8 opcode, so that it can be
transformed to "lea foo, %eax".  With the locally defined symbol, foo,
we convert

   mov foo@GOT[(%reg1)], %reg2
to
   lea foo[@GOTOFF(%reg1)], %reg2

and convert

   call/jmp *foo@GOT[(%reg)]
to

   nop call foo/jmp foo nop

When PIC is false, convert

   test %reg1, foo@GOT[(%reg2)]
to
   test $foo, %reg1

and convert

binop foo@GOT[(%reg1)], %reg2

to

binop $foo, %reg2

where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.

bfd/

* elf32-i386.c: Include opcode/i386.h.
(elf_howto_table): Add R_386_GOT32X.
(R_386_ext2): Replace R_386_IRELATIVE with R_386_GOT32X.
(elf_i386_reloc_type_lookup): Handle BFD_RELOC_386_GOT32X.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_i386_check_relocs): Handle R_386_GOT32X.  Replace
need_convert_mov_to_lea with need_convert_load.
(elf_i386_gc_sweep_hook): Handle R_386_GOT32X.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_convert_mov_to_lea): Renamed to ...
(elf_i386_convert_load): This.  Replace need_convert_mov_to_lea
with need_convert_load.  Support R_386_GOT32X transformations.
* reloc.c (BFD_RELOC_386_GOT32X): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.

gas/

* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_GOT32X.
(tc_gen_reloc): Likewise.
(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
"test %reg, mem" and "binop mem, %reg" where binop is one of
adc, add, and, cmp, or, sbb, sub, xor instructions.  Set
fx_tcbit if the REX prefix is generated.  Set fx_tcbit2 if
BFD_RELOC_386_GOT32X should be generated.
(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
is set.

gas/testsuite/

* gas/i386/got.d: New file.
* gas/i386/got.s: Likewise.
* gas/i386/i386.exp: Run got.
* gas/i386/localpic.d: Replace R_386_GOT32 with R_386_GOT32X.
* gas/i386/mixed-mode-reloc32.d: Likewise.
* gas/i386/reloc32.d: Likewise.

include/elf/

* i386.h (R_386_GOT32X): New relocation.

ld/testsuite/

* ld-i386/branch1.d: New file.
* ld-i386/branch1.s: Likewise.
* ld-i386/call1.d: Likewise.
* ld-i386/call1.s: Likewise.
* ld-i386/call2.d: Likewise.
* ld-i386/call2.s: Likewise.
* ld-i386/got1.dd: Likewise.
* ld-i386/got1.out: Likewise.
* ld-i386/got1a.S: Likewise.
* ld-i386/got1b.c: Likewise.
* ld-i386/got1c.c: Likewise.
* ld-i386/got1d.S: Likewise.
* ld-i386/jmp1.d: Likewise.
* ld-i386/jmp1.s: Likewise.
* ld-i386/jmp2.d: Likewise.
* ld-i386/jmp2.s: Likewise.
* ld-i386/load1.d: Likewise.
* ld-i386/load1.s: Likewise.
* ld-i386/load2.d: Likewise.
* ld-i386/load2.s: Likewise.
* ld-i386/load3.d: Likewise.
* ld-i386/load3.s: Likewise.
* ld-i386/load4.s: Likewise.
* ld-i386/load4a.d: Likewise.
* ld-i386/load4b.d: Likewise.
* ld-i386/load5.s: Likewise.
* ld-i386/load5a.d: Likewise.
* ld-i386/load5b.d: Likewise.
* ld-i386/load6.d: Likewise.
* ld-i386/load6.s: Likewise.
* ld-i386/i386.exp: Run branch1, call1, call2, jmp1, jmp2,
load1, load2, load3, load4a, load4b, load5a, load5b and load6
tests.  Run got1 test.

S/390: ifunc: Redirect local function calls to the IPLT.

bfd/ChangeLog:

* elf32-s390.c (elf_s390_check_relocs): Set the non_got_ref marker
only when linking an executable.
(elf_s390_relocate_section): Redirect PC-relative relocs to a IPLT
slot.
* elf64-s390.c (elf_s390_check_relocs): Set the non_got_ref marker
only when linking an executable.
(elf_s390_relocate_section): Redirect PC-relative relocs to a IPLT
slot.

S/390: ifunc: Fix function pointers to hidden ifunc symbols.

bfd/ChangeLog:
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Set the PLT
reference counters for local IFUNC calls.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.

S/390: ifunc: Handle GOTOFF relocs on ifunc symbols.

Normally a GOTOFF reloc only uses the GOT pointer to address something
relativ to it without actually requiring a GOT or PLT slot.  Things
change if the target is an ifunc symbol though.

bfd/ChangeLog:

* elf32-s390.c (elf_s390_check_relocs): Fallthrough to the PLT
slot allocating code for GOTOFF relocs on ifunc symbols.
(elf_s390_gc_sweep_hook): Decrement plt refcount for GOTOFF relocs
on ifunc symbols.
(elf_s390_relocate_section): Redirect a GOTOFF reloc to an iplt
slot.

S/390: ifunc: Fix PR18841.

In order to get the ifunc relocs properly sorted the correct class
needs to be returned.  The code mimics what has been done for x86.

bfd/ChangeLog:

PR ld/18841
* elf32-s390.c (elf_s390_reloc_type_class): Return
reloc_class_ifunc for ifunc symbols.
* elf64-s390.c (elf_s390_reloc_type_class): Likewise.

S/390: ifunc: Fix for undefined ifunc symbols.

bfd/ChangeLog:

* elf32-s390.c (elf_s390_finish_dynamic_symbol): Call
elf_s390_finish_ifunc_symbol only for actually defined symbols.
* elf64-s390.c (elf_s390_finish_dynamic_symbol): Likewise.

S/390: ifunc: Enable the ifunc tests.

ld/testsuite/ChangeLog:

* ld-ifunc/ifunc.exp: Run ifunc tests on s390* targets.

S/390: Get rid of superfluous parameter to s390_elf_allocate_ifunc_dyn_relocs.

bfd/ChangeLog:
* elf-s390-common.c (s390_elf_allocate_ifunc_dyn_relocs): Remove
`head' parameter.
* elf32-s390.c (allocate_dynrelocs): Don't use last parameter.
* elf64-s390.c (allocate_dynrelocs): Don't use last parameter.

Run add-symbol test on mips

* binutils-all/add-symbol.d: Run test on mips.  Support either
order of NEW and NEWDATA symbols.

Fix tests for PR 18500, revisited

Correct commit a846e9c1.

PR gas/18500
* gas/arm/vfpv2-ldr_immediate.d: Use parentheses, not brackets,
to select alternatives.
* gas/arm/vfpv3-ldr_immediate.d: Likewise.
* gas/arm/vfpv3xd-ldr_immediate.d: Likewise.

Automatic date update in version.in

Fix accessing a function's fields (parameters) from Python (PR 18073)

Since 7.4, gdb doesn't allow calling .fields() on a function type, even
though the documentation states it should return a list corresponding to
the function's parameters.  This patch restores the intended behaviour
and adds a test for it.

Reg-tested on Arch Linux x86-64.

gdb/ChangeLog:

PR python/18073
* python/py-type.c (typy_get_composite): Allow returning a
function type.

gdb/testsuite/ChangeLog:

PR python/18073
* gdb.python/py-type.c (C::a_method): New.
(C::a_const_method): New.
(C::a_static_method): New.
(a_function): New.
* gdb.python/py-type.exp (test_fields): Test getting fields
from function and method.

fort_dyn_array: add basic fortran dyn array support

Fortran provide types whose values may be dynamically allocated
or associated with a variable under explicit program control.
The purpose of this commit is:

  * to read allocated/associated DWARF tags and store them in
    the dynamic property list of main_type.

  * enable GDB to print the value of a dynamic array in Fortran
    in case the type is allocated or associated (pointer to
    dynamic array).

Examples:
    (gdb) p vla_not_allocated
    $1 = <not allocated>

    (gdb) p vla_allocated
    $1 = (1, 2, 3)

    (gdb) p vla_ptr_not_associated
    $1 = <not associated>

    (gdb) p vla_ptr_associated
    $1 = (1, 2, 3)

Add basic test coverage for most dynamic array use-cases in Fortran.
The commit contains the following tests:
  * Ensure that values of Fortran dynamic arrays
    can be evaluated correctly in various ways and states.
  * Ensure that Fortran primitives can be evaluated
    correctly when used as a dynamic array.
  * Dynamic arrays passed to subroutines and handled
    in different ways inside the routine.
  * Ensure that the ptype of dynamic arrays in
    Fortran can be printed in GDB correctly.
  * Ensure that dynamic arrays in different states
    (allocated/associated) can be evaluated.
  * Dynamic arrays passed to functions and returned from
    functions.
  * History values of dynamic arrays can be accessed and
    printed again with the correct values.
  * Dynamic array evaluations using MI protocol.
  * Sizeof output of dynamic arrays in various states.

The patch was tested using the test suite on Ubuntu 12.04 64bit.

gdb/ChangeLog:

        * dwarf2read.c (set_die_type): Add read of
        DW_AT_allocated and DW_AT_associated.
        * f-typeprint.c: New include of typeprint.h
        (f_print_type): Add check for allocated/associated
        status of type.
        (f_type_print_varspec_suffix): Add check for
        allocated/associated status of type.
        * gdbtypes.c (create_array_type_with_stride):
        Add check for valid data location of type in
        case allocated or associated attributes are set.
        Length of an array should be only calculated if
        allocated or associated is resolved as true.
        (is_dynamic_type_internal): Add check for allocated/
        associated.
        (resolve_dynamic_array): Evaluate allocated/associated
        properties.
        * gdbtypes.h (enum dynamic_prop_node_kind): <DYN_PROP_ALLOCATED>
        <DYN_PROP_ASSOCIATED>: New enums.
        (TYPE_ALLOCATED_PROP, TYPE_ASSOCIATED_PROP): New macros.
        (type_not_allocated): New function.
        (type_not_associated): New function.
        * valarith.c (value_subscripted_rvalue): Add check for
        allocated/associated.
        * valprint.c: New include of typeprint.h.
        (valprint_check_validity): Add check for allocated/associated.
        (value_check_printable): Add check for allocated/
        associated.
        * typeprint.h (val_print_not_allocated): New function.
        (val_print_not_associated): New function.
        * typeprint.c (val_print_not_allocated): New function.
        (val_print_not_associated): New function.

gdb/testsuite/ChangeLog:

        * gdb.fortran/vla-alloc-assoc.exp: New file.
        * gdb.fortran/vla-datatypes.exp: New file.
        * gdb.fortran/vla-datatypes.f90: New file.
        * gdb.fortran/vla-history.exp: New file.
        * gdb.fortran/vla-ptype-sub.exp: New file.
        * gdb.fortran/vla-ptype.exp: New file.
        * gdb.fortran/vla-sizeof.exp: New file.
        * gdb.fortran/vla-sub.f90: New file.
        * gdb.fortran/vla-value-sub-arbitrary.exp: New file.
        * gdb.fortran/vla-value-sub-finish.exp: New file.
        * gdb.fortran/vla-value-sub.exp: New file.
        * gdb.fortran/vla-value.exp: New file.
        * gdb.fortran/vla-ptr-info.exp: New file.
        * gdb.mi/mi-vla-fortran.exp: New file.
        * gdb.mi/vla.f90: New file.

Adjust timeout in gdb.base/freebpcmd.exp.

2015-10-21  Sandra Loosemore  <sandra@codesourcery.com>

gdb/testsuite/
* gdb.base/freebpcmd.exp: Use with_timeout_factor instead
of hardwired timeout value.

Fix tests for PR 18500 so that they will pass for big-endian ARM toolchains.

PR gas/18500
* gas/arm/vfpv3xd-ldr_immediate.d: Update test for big-endian ARM
toolchains.
* gas/arm/vfpv3-ldr_immediate.d: Likewise.
* gas/arm/vfpv2-ldr_immediate.d: Likewise.

Support software breakpoints for ARM linux in GDBServer.

This patch enables software breakpoints via GDB's Z0 packets on ARM.

No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }

gdb/gdbserver/ChangeLog:

* linux-arm-low.c (arm_supports_z_point_type): Add software
breakpoint support.

Refactor the breakpoint definitions in linux-arm-low.c.

Before arm_sw_breakpoint_from_kind would use an #ifdef to return the right
arm_breakpoint from the abi or eabi breakpoint type.

arm_breakpoint_at would also check for the arm_breakpoint ||
arm_eabi_breakpoint.

Thus the selected arm_breakpoint would be what arm_sw_breakpoint_from_kind
returned and arm_breakpoint was arm_abi_breakpoint.

This patch makes it more clear by naming those for what they are : 2 separate
entities: arm_abi_breakpoint and arm_eabi_breakpoint and set the current used
one as arm_breakpoint.

This allows a cleaner arm_sw_breakpoint_from_kind as it just returns
arm_breakpoint rather than having the #ifdef in that function.

Any other reference to the arm_breakpoint can now also be clear of #ifdefs...

No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }

gdb/gdbserver/ChangeLog:

* linux-arm-low.c: Refactor breakpoint definitions.
(arm_breakpoint_at): Adjust for arm_abi_breakpoint.
(arm_sw_breakpoint_from_kind): Adjust for arm_breakpoint.

Implement breakpoint_kind_from_pc and sw_breakpoint_from_kind for ARM in GDBServer.

ARM can have multiple breakpoint types based on the instruction set
it's currently in: arm, thumb or thumb2.

GDBServer needs to know what breakpoint is to be inserted at location
when inserting a breakpoint.

This is handled by the breakpoint_kind_from_pc and sw_breakpoint_from_kind
target ops introduced in a previous patch, this patch adds the
arm_breakpoint_kind_from_pc and arm_sw_breakpoint_from_kind implementation so
that the proper breakpoint type is returned based on the pc.

Also in order to share some code with GDB a new file called arm.c have been
introduced in arch/.

While this file does not contain much yet future patches will add more
to it thus the inclusion at this stage.

No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }

gdb/ChangeLog:

* Makefile.in: Add arm.c/o.
* arch/arm.c: New file.
* arch/arm.h: (IS_THUMB_ADDR): Move macro from arm-tdep.c.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* arm-tdep.c (int thumb_insn_size): Move to arm.c.
(IS_THUMB_ADDR): Move to arm.h.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* configure.tgt: Add arm.o to all ARM configs.

gdb/gdbserver/ChangeLog:

* Makefile.in: Add arm.c/o.
* configure.srv: Likewise.
* linux-arm-low.c (arm_breakpoint_kinds): New enum.
(arm_breakpoint_kind_from_pc): New function.
(arm_sw_breakpoint_from_kind): Return proper kind.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize.

Support breakpoint kinds for software breakpoints in GDBServer.

There's two ways to set breakpoints in GDBServer.

 - GDBServer setting its own breakpoints, through API set_breakpoint_at.

 - GDBServer setting breakpoints according to the information in Z
   packets, through API set_gdb_breakpoint.

Before this patch the breakpoint kinds were a concept unique to GDB and Z
packets, as GDBServer never had to set different kinds of breakpoint on its
own.

This patch teaches GDBServer to handle breakpoint kinds for its own
breakpoints. It generalizes the breakpoint kind as per Z packets to
represent different kinds of breakpoints directly set by GDBServer also.

GDBServer now querys breakpoint_kind_from_pc to know what breakpoint kind to
set on its own.

As the kind is now a differentiating factor equivalent to size for the
breakpoint struct and that it's size can be queried using
sw_breakpoint_from_kind, the size field has been replaced with the kind field.
All references to size are now replaced by kind or a call to bp_size that wraps
sw_breakpoing_from_kind and returns the size of the breakpoint in memory.

To fetch the software breakpoint data bp_opcode is called and wraps the
sw_breakpoint_from_kind call.

No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }

gdb/gdbserver/ChangeLog:

* linux-low.c (initialize_low): Ajdust for breakpoint global variables
removal.
* mem-break.c : Remove breakpoint_data/breakpoint_len global variables.
(struct raw_breakpoint) <size>: Remove.
(struct raw_breakpoint) <kind>: Add.
(bp_size): New function.
(bp_opcode): Likewise.
(find_raw_breakpoint_at): Adjust for kind.
(insert_memory_breakpoint): Adjust for kind call bp_size,bp_opcode.
(remove_memory_breakpoint): Adjust for kind call bp_size.
(set_raw_breakpoint_at): Adjust for kind.
(set_breakpoint): Likewise.
(set_breakpoint_at): Call breakpoint_kind_from_pc.
(delete_raw_breakpoint): Adjust for kind.
(delete_breakpoint): Likewise.
(find_gdb_breakpoint): Likewise.
(set_gdb_breakpoint_1): Likewise.
(set_gdb_breakpoint): Likewise.
(delete_gdb_breakpoint_1): Likewise.
(delete_gdb_breakpoint): Likewise.
(uninsert_raw_breakpoint): Likewise.
(reinsert_raw_breakpoint): Likewise.
(set_breakpoint_data): Remove.
(validate_inserted_breakpoint): Adjust for kind call bp_size,bp_opcode.
(check_mem_read): Adjust for kind call bp_size.
(check_mem_write): Adjust for kind call bp_size,bp_opcode.
(clone_one_breakpoint): Adjust for kind.
* mem-break.h (set_gdb_breakpoint): Likewise.
(delete_gdb_breakpoint): Likewise.
* server.c (process_serial_event): Likewise.

Add the target_ops needed for software breakpoints in GDBServer.

This patch is in preparation for software breakpoints on ARM linux.  It
refactors breakpoint and breakpoint_len into breakpoint_kind_from_pc and
sw_breakpoint_from kind to prepare the case where we have multiple types of
breakpoints.

Kind is the type of breakpoint (hardware or software) to be inserted, usually it
is the lenght of the software breakpoint but can be something else depending on
the target.

This patch introduces the linux_target_ops breakpoint_kind_from_pc and
sw_breakpoint_from_kind.

breakpoint_kind_from_pc returns the breakpoint kind and adjusts the PC to the
real memory location in case a flag was present in the PC. E.g the instruction
mode on ARM.

sw_breakpoint_from_kind returns the software breakpoint for this kind as a
string of bytes, the length of the breakpoint is adjusted for the breakpoint's
size in memory.

For targets that have only one kind of breakpoint, the default value 0 is
returned by linux_breakpoint_kind_from_pc so that not all targets need to
implement the breakpoint_kind_from_pc operation.

No regressions, tested on Ubuntu 14.04 on ARMv7 and x86
With gdbserver-{native,extended} / { -marm -mthumb }

Also since the target_ops have been changed compilation was tested on
affected archs namely : aarch64, arm, bfin, cris, crisv32, m32r,
m68k, mips, nios2, ppc, s390, sparc, tic6x, tile, x86, steins.

Not tested : sh

gdb/gdbserver/ChangeLog:

* linux-aarch64-low.c (aarch64_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-arm-low.c (arm_breakpoint_kind_from_pc): New function.
(arm_sw_breakpoint_from_kind): New function.
* linux-bfin-low.c (bfin_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-cris-low.c (cris_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-crisv32-low.c (cris_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-low.c (linux_wait_1): Call breakpoint_kind_from_pc
and sw_breakpoint_from_kind to increment the pc.
(linux_breakpoint_kind_from_pc): New function.
(linux_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize field.
(initialize_low): Call breakpoint_kind_from_pc and
sw_breakpoint_from_kind to replace breakpoint_data/len.
* linux-low.h (struct linux_target_ops) <breakpoint_kind_from_pc>:
New field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Likewise.
* linux-m32r-low.c (m32r_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-m68k-low.c (m68k_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-mips-low.c (mips_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-nios2-low.c (nios2_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-ppc-low.c (ppc_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-s390-low.c (s390_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-sh-low.c (sh_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-sparc-low.c (sparc_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-tic6x-low.c (tic6x_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-tile-low.c (tile_sw_breakpoint_from_kind): New function.
* linux-x86-low.c (x86_sw_breakpoint_from_kind): New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.
* linux-xtensa-low.c (xtensa_sw_breakpoint_from_kind) New function.
(struct linux_target_ops) <breakpoint>: Remove.
(struct linux_target_ops) <breakpoint_len>: Remove.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize field.
(struct linux_target_ops) <sw_breakpoint_from_kind>: Initialize field.

Fix typo in spelling of author's name.

Remove checking vCont;s in exec_cmd_expect_vCont_count

Nowadays, in the range-stepping tests, we check not only the number of
vCont;r packets but also the number of vCont;s packets, because we think
the remote target which can do range stepping must support single step.

However, if we turn displaced stepping on, the remote target (GDBserver)
can do range stepping, and support single step, but GDB may decide to
resume instructions in the scratchpad rather than single step them one
by one for displaced stepping.  For example, when aarch64 GDB debugs
arm linux program with aarch64 GDBserver, GDBserver supports both range
stepping and single step, but GDB (with the gdbarch for arm-linux)
decides resume instructions in the scratchpad, so in the RSP traffic,
there is no vCont;s packet at all, and some range-stepping.exp tests
fail,

FAIL: gdb.base/range-stepping.exp: multi insns: next: vCont;s=1 vCont;r=1

This patch is to get rid of the checking to the number of vCont;s in
exec_cmd_expect_vCont_count.

gdb/testsuite:

2015-10-21  Yao Qi  <yao.qi@linaro.org>

* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Remove argument exp_vCont_s.
* gdb.base/range-stepping.exp: Callers updated.
* gdb.trace/range-stepping.exp: Likewise.

[nto] Improve ABI sniffing.

Use qnx specific notes to figure out the OS.

gdb/ChangeLog:
* gdb/nto-tdep.c (QNX_NOTE_NAME, QNX_INFO_SECT_NAME): New defines.
(nto_sniff_abi_note_section): New function.
(nto_elf_osabi_sniffer): Use new function to recognize nto specific
binary.