daily update

PR 10141
* options.h (class General_options): Add -z lazy and -z now.  Sort
-z options into alphabetical order.
* layout.cc (Layout::finish_dynamic_section): Handle -z now.

gdb/
PR gdb/9988:
* buildsym.c (block_compar): New function.
(end_symtab): Replace the bubble sort by a qsort based code.

* linux-low.c (usr_fetch_inferior_registers): Remove check for regno 0.
* proc-service.c (ps_lgetregs): Pass -1 to fetch all registers.
* regcache.c (get_regcache): Likewise.
* spu-low.c (spu_fetch_registers): Remove 0 to -1 conversion.
* win32-low.c (child_fetch_inferior_registers): Remove check for
regno 0.

2009-05-07  Sami Wagiaalla  <swagiaal@redhat.com>

* MAINTAINERS (Write After Approval): Add self.

    * gas/app, gas/as.c, gas/as.h, gas/atof-generic.c, gas/cgen.c,
        gas/config/atof-ieee.c, gas/config/obj-aout.c,
        gas/config/obj-coff.c, gas/config/obj-ecoff.c,
        gas/config/obj-elf.c, gas/config/obj-som.c, gas/config/tc-alpha.c,
        gas/config/tc-arc.c, gas/config/tc-arm.c, gas/config/tc-cr16.c,
        gas/config/tc-cris.c, gas/config/tc-crx.c, gas/config/tc-d30v.c,
        gas/config/tc-dlx.c, gas/config/tc-hppa.c, gas/config/tc-i370.c,
        gas/config/tc-i386-intel.c, gas/config/tc-i386.c,
        gas/config/tc-i860.c, gas/config/tc-i960.c, gas/config/tc-ia64.c,
        gas/config/tc-iq2000.c, gas/config/tc-m32c.c,
        gas/config/tc-m32r.c, gas/config/tc-m68hc11.c,
        gas/config/tc-m68k.c, gas/config/tc-maxq.c, gas/config/tc-mcore.c,
        gas/config/tc-mep.c, gas/config/tc-mips.c, gas/config/tc-mmix.c,
        gas/config/tc-mn10300.c, gas/config/tc-moxie.c,
        gas/config/tc-ns32k.c, gas/config/tc-pj.c, gas/config/tc-ppc.c,
        gas/config/tc-s390.c, gas/config/tc-score.c,
        gas/config/tc-score7.c, gas/config/tc-sh.c, gas/config/tc-sparc.c,
        gas/config/tc-spu.c, gas/config/tc-tic30.c, gas/config/tc-vax.c,
        gas/config/tc-xtensa.c, gas/config/xtensa-relax.c,
        gas/dw2gencfi.c, gas/dwarf2dbg.c, gas/ehopt.c, gas/expr.c,
        gas/frags.c, gas/input-file.c, gas/read.c, gas/sb.c,
        gas/subsegs.c, gas/symbols.c, gas/write.c: Change the name of the
        gas macro `assert' to `gas_assert'.

* spu-tdep.c (spu_get_longjmp_target): New function.
(spu_gdbarch_init): Install it.

2009-06-22  H.J. Lu  <hongjiu.lu@intel.com>

PR server/10306
* remote.c (getpkt_or_notif_sane_1): Initialize val to -1.

    * config/tc-arm.c (implicit_it_mode): New enum.
        (implicit_it_mode): New global.
        (it_instruction_type): New enum.
        (arm_parse_it_mode): New function.
        (arm_long_opts): New option added.
        (arm_it): New field.
        (it_state): New enum.
        (now_it): New macro.
        (check_it_blocks_finished): New function.
        (insns[]): Use the IT Thumb opcodes for ARM too.
        (arm_cleanup): Call check_it_blocks_finished.
        (now_it_compatible): New function.
        (conditional_insn): New function.
        (set_it_insn_type): New macro.
        (set_it_insn_type_last): New macro.
        (do_it): Call automatic IT machinery functions.
        (do_t_add_sub): Likewise
        (do_t_arit3): Likewise.
        (do_t_arit3c): Likewise.
        (do_t_blx): Likewise.
        (do_t_branch): Likewise.
        (do_t_bkpt): Likewise.
        (do_t_branch23): Likewise.
        (do_t_bx): Likewise.
        (do_t_bxj): Likewise.
        (do_t_cps): Likewise.
        (do_t_cpsi): Likewise.
        (do_t_cbz): Likewise.
        (do_t_it): Likewise.
        (encode_thumb2_ldmstm): Likewise.
        (do_t_ldst): Likewise.
        (do_t_mov_cmp): Likewise.
        (do_t_mvn_tst): Likewise.
        (do_t_mul): Likewise.
        (do_t_neg): Likewise.
        (do_t_setend): Likewise.
        (do_t_shift): Likewise.
        (do_t_tb): Likewise.
        (output_it_inst): New function.
        (new_automatic_it_block): New function.
        (close_automatic_it_block): New function.
        (now_it_add_mask): New function.
        (it_fsm_pre_encode): New function.
        (handle_it_state): New function.
        (it_fsm_post_encode): New function.
        (force_automatic_it_block_close): New function.
        (in_it_block): New function.
        (md_assemble): Call automatic IT block machinery functions.
        (arm_frob_label): Likewise.
        (arm_opts): New element.
        * config/tc-arm.h (it_state): New enum.
        (current_it): New struct.
        (arm_segment_info_type): New member added.
        * doc/c-arm.texi: New option -mimplicit-it documented.

        * gas/arm/arm-it-auto.d: New test.
        * gas/arm/arm-it-auto.s: New file.
        * gas/arm/arm-it-auto-2.d: New test case.
        * gas/arm/arm-it-auto-2.s: New file.
        * gas/arm/arm-it-auto-3.d: New test case.
        * gas/arm/arm-it-auto-3.s: New file.
        * gas/arm/arm-it-bad.d: New test case.
        * gas/arm/arm-it-bad.l: New file.
        * gas/arm/arm-it-bad.s: New file.
        * gas/arm/arm-it-bad-2.d: New test case.
        * gas/arm/arm-it-bad-2.l: New file.
        * gas/arm/arm-it-bad-2.s: New file.
        * gas/arm/arm-it-bad-3.d: New test case.
        * gas/arm/arm-it-bad-3.l: New file.
        * gas/arm/arm-it-bad-3.s: New file.
        * gas/arm/thumb2_it_auto.d: New test.
        * gas/arm/thumb2_it_bad.l: Error message updated.
        * gas/arm/thumb2_it_bad_auto.d: New test.
        * gas/arm/thumb2_it.d: Comment added.
        * gas/arm/thumb2_it_bad.d: Comment added.

    * po/fi.po: Updated Finish translation.

2009-06-22  Christophe Lyon  <christophe.lyon@st.com>

bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use PLT address as
destination for defined dynamic symbols when deciding whether to
insert a stub or not.
(allocate_dynrelocs): Make sure functions are not marked as Thumb
when actually accessed through a PLT, even when generating a
shared lib.

ld/testsuite:
* ld-arm/farcall-mixed-app.s: Add new references to check more
modes switching.
* ld-arm/farcall-mixed-lib1.s: Likewise.
* ld-arm/farcall-mixed-app-v5.d: Update expected result.
* farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.

* ld-pe/pe-run.exp (proc test_direct_link_dll):  Fix incorrect
line-wrapping.

    * readelf.c (target_specific_reloc_handling): New function:
        Processes relocs in a target specific manner.
        (debug_apply_relocations): Use the new function.
        * dwarf.c (display_debug_loc): End the dump with a blank line.
        (struct debug_display): Enable reloc processing for .debug_aranges
        and .debug_loc sections.

(committed as obvious)
2009-06-22  Tristan Gingold  <gingold@adacore.com>

* darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
instead of "%p".

2009-06-22  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_canonicalize_reloc): Append a sentinel to
the relocs array.

* elfcpp.h (SHN_X86_64_LCOMMON): Define enum constant.
(enum SHT): Add SHT_X86_64_UNWIND.
(enum SHF): Add SHT_X86_64_LARGE.

Fix ChangeLog e-mail address.

* layout.cc (Layout::make_output_section): Call
Target::new_output_section.
(Layout::attach_allocated_section_to_segment): Put large section
sections in a separate load segment with the large segment flag
set.
(Layout::segment_precedes): Sort large data segments after other
load segments.
(align_file_offset): New static function.
(Layout::set_segment_offsets): Use align_file_offset.
* output.h (class Output_section): Add is_small_section_ and
is_large_section_ fields.
(Output_section::is_small_section): New function.
(Output_section::set_is_small_section):  New function.
(Output_section::is_large_section): New function.
(Output_section::set_is_large_section): New function.
(Output_section::is_large_data_section): New function.
(class Output_segment): Add is_large_data_segment_ field.
(Output_segment::is_large_data_segment): New function.
(Output_segment::set_is_large_data_segment): New function.
* output.cc (Output_section::Output_section): Initialize new
fields.
(Output_segment::Output_segment): Likewise.
(Output_segment::add_output_section): Add assertion that large
data sections always go in large data segments.  Force small data
sections to the end of the list of data sections.  Force small BSS
sections to the start of the list of BSS sections.  For large BSS
sections to the end of the list of BSS sections.
* symtab.h (class Symbol): Declare is_common_shndx.
(Symbol::is_defined): Check Symbol::is_common_shndx.
(Symbol::is_common): Likewise.
(class Symbol_table): Define enum Commons_section_type.  Update
declarations.  Add small_commons_ and large_commons_ fields.
* symtab.cc (Symbol::is_common_shndx): New function.
(Symbol_table::Symbol_table): Initialize new fields.
(Symbol_table::add_from_object): Put small and large common
symbols in the right list.
(Symbol_table::sized_finalized_symbol): Check
Symbol::is_common_shndx.
(Symbol_table::sized_write_globals): Likewise.
* common.cc (Symbol_table::do_allocate_commons): Allocate new
common symbol lists.  Don't call do_allocate_commons_list if the
list is empty.
(Symbol_table::do_allocate_commons_list): Remove is_tls
parameter.  Add comons_section_type parameter.  Change all
callers.  Handle small and large common symbols.
* object.cc (Sized_relobj::do_finalize_local_symbols): Check
Symbol::is_common_shndx.
* resolve.cc (symbol_to_bits): Likewise.
* target.h (Target::small_common_shndx): New function.
(Target::small_common_section_flags): New function.
(Target::large_common_shndx): New function.
(Target::large_common_section_flags): New function.
(Target::new_output_section): New function.
(Target::Target_info): Add small_common_shndx, large_common_shndx,
small_common_section_flags, and large_common_section_flags
fields.
(Target::do_new_output_section): New virtual function.
* arm.cc (Target_arm::arm_info): Initialize new fields.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info) [all versions]:
Likewise.
* sparc.c (Target_sparc::sparc_info) [all versions]: Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
(Target_x86_64::do_new_output_section): New function.
* configure.ac: Define conditional MCMODEL_MEDIUM.
* testsuite/Makefile.am (check_PROGRAMS): Add large.
(large_SOURCES, large_CFLAGS, large_DEPENDENCIES): Define.
(large_LDFLAGS): Define.
* testsuite/large.c: New file.
* testsuite/testfile.cc (Target_test::test_target_info):
Initialize new fields.
* configure, testsuite/Makefile.in: Rebuild.

cpu/
* m32c.opc (parse_lab_5_3): Use correct enum.
opcodes/
* m32c-asm.c: Regenerate.

include/elf/
* ppc.h (R_PPC_RELAX*): Define as enum.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Handle R_PPC_RELAX* in switch.
* elf32-v850.c (v850_elf_relocate_section): Warning fix.

* score-dis.c (print_insn_score48, print_insn_score32): Move default
case label to proper lexical block.
* score7-dis.c (print_insn_score32): Likewise.

*** empty log message ***

* elf64-ppc.c (ppc64_elf_edit_opd): Avoid gcc warning.

daily update

2009-06-21  Michael Snyder  <msnyder@vmware.com>

* inferior.h: Update ancient comment.

merge from gcc

*** empty log message ***

daily update

* mloop.in: Add missing # comment marker.
* mloop2.in: Ditto.
* mloopx.in: Ditto.

2009-06-19  H.J. Lu  <hongjiu.lu@intel.com>

* elflink.c (elf_link_add_object_symbols): Avoid warning
from -Wjump-misses-init in gcc 4.5.0.

PR 10302
* doc/as.texinfo (Section <ELF "M,S" flag>): Clarify tail merge.

2009-06-19  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_check_relocs): Properly check local
symbol on error.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.

* solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
NULL pointer.
(scan_dyntag): Skip if input bfd isn't elf flavoured.
(locate_base): Call elf_locate_base even without an exec_bfd.

*** empty log message ***

daily update

Fix typo in bug number

bfd/

2009-06-19  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_tls_transition): Add a parameter,
r_symndx.  Report local symbol name on error.
(elf_i386_check_relocs): Updated.  Report local symbol name on
error.
(elf_i386_gc_sweep_hook): Updated.
(elf_i386_relocate_section): Likewise.

* elf64-x86-64.c (elf64_x86_64_tls_transition): Add a parameter,
r_symndx.  Report local symbol name on error.
(elf64_x86_64_check_relocs): Updated.  Report local symbol name
on error.
(elf64_x86_64_gc_sweep_hook): Updated.
(elf64_x86_64_relocate_section): Likewise.

ld/testsuite/

2009-06-19  H.J. Lu  <hongjiu.lu@intel.com>

* ld-i386/i386.exp: Run tlsgd2.

* ld-i386/tlsgd2.d: New.
* ld-i386/tlsgd2.s: Likewise.

* ld-x86-64/tlsgd3.d: Updated.

2009-06-19  Samuel Bronson  <naesten@gmail.com>

PR cli/9930:
* cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
for prefix commands to avoid duplicates in the output.

2009-06-19  Samuel Bronson  <naesten@gmail.com>

PR cli/9930:
* cli/cli-decode.c (apropos_cmd): Fix avoidance of double
printing.

* breakpoint.c (expand_line_sal_maybe): When explicit_line,
skip prologue on each sals.
(skip_prologue_sal): Return explicit_line and explicit_pc
unmodified.

    * ar.c (usage): Do not use #ifdef inside _("...).
        * nm.c (usage): Likewise.

2009-06-19  Tristan Gingold  <gingold@adacore.com>

* darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
line.

2009-06-19  Tristan Gingold  <gingold@adacore.com>

* machoread.c (macho_symtab_read): Adjust for bfd changes.
* darwin-nat.h (struct darwin_exception_msg): New type to describe
a mach exception.
(struct private_thread_info): New type to describe the state of the
thread.
(DEF_VEC_I thread_t): Removed, replaced by ...
(DEF_VEC_O darwin_thread_t): ... this new type.
(struct darwin_inferior): Renamed to ...
(struct private_inferior): ... this type.  Fields added.
(darwin_not_port): Moved into the private inferior structure.
* darwin-nat.c: Add includes, improve comments.
Rewrite to handle multiple threads and processes.
(darwin_resume_to): New function and protype.
(darwin_resume, darwin_wait_to, darwin_wait): Ditto.
(darwin_kill_inferior): Add ops argument.
(darwin_pid_to_str): New function.
(darwin_thread_alive): Ditto.
(darwin_inf, darwin_not_port): Removed.
(darwin_inf_fake_stop): New variable.
(msgin, msgout, msg_state, exc_msg): Removed.
(mach_check_error): Use warning instead of error.
(darwin_ptrace): Adjust debug level.
(cmp_thread_t): Fix names (typo).
(darwin_check_new_threads): Argument is now an inferior,
adjust for new structures, add no change check, ignore dead ports,
handle first thread case.
(find_inferior_task_it): New function.
(find_inferior_notify_it): Ditto.
(darwin_find_inferior_by_task): Ditto.
(darwin_find_inferior_by_notify): Ditto.
(darwin_find_thread): Ditto.
(darwin_suspend_inferior): Ditto.
(darwin_resume_inferior): Ditto.
(catch_exception_raise_state): Removed.
(catch_exception_raise_state_identity): Removed.
(darwin_suspend_inferior_it): New function.
(darwin_resume_inferior_it): Ditto.
(darwin_dump_message): New function, extracted from darwin_wait.
(darwin_decode_exception_message): New function.
(darwin_encode_reply): New function.
(catch_exception_raise): Removed.
(darwin_send_reply): New function, extracted from darwin_resume.
(darwin_resume_thread): New function, extracted from darwin_resume.
(struct resume_inferior_threads_param): New type.
(darwin_resume_inferior_threads_it): New function.
(darwin_resume_inferior_threads): New function.
(darwin_suspend_inferior_threads): New function.
(darwin_resume): Mostly rewritten to handle multiple threads and
some corner cases.
(darwin_decode_message): New function extracted from darwin_wait.
(cancel_breakpoint): New function.
(darwin_wait): Mostly rewritten.  Handle multiple threads.
(darwin_mourn_inferior): Adjust for per process structures.
(darwin_reply_to_all_pending_messages): New function.
(darwin_stop_inferior): Adjust for per inferior structures.
(darwin_attach_pid): Ditto.
(darwin_init_thread_list): Ditto.
(darwin_attach): Ditto.
(darwin_detach): Ditto.
(darwin_files_info): Now empty.
(darwin_pid_to_str): Adjust returns string to match one expected by
the testsuite.
(darwin_read_write_inferior): Rename err variable to match other uses.
Adjust debug message.  Handle submaps.
(darwin_xfer_memory): Adjust for per inferior structures.
(set_enable_mach_exceptions): Ditto.
(darwin_pid_to_exec_file): New function.
(darwin_get_ada_task_ptid): Ditto.
(darwin_supports_multi_process): Ditto.
(_initialize_darwin_inferior): Remove useless assertion, adjust for
per inferior structures.  Add new target operations.

2009-06-19  Aleksandar Ristovski  <aristovski@qnx.com>
    Pedro Alves <pedro@codesourcery.com>

* target.h (struct target_ops) <supports_multi_process>: New
callback.
(target_supports_multi_process): New.
* server.c (handle_query): Even if GDB reports support, only
enable multi-process if the target also supports it.  Report
multi-process support only if the target backend supports it.
* linux-low.c (linux_supports_multi_process): New function.
(linux_target_ops): Install it as target_supports_multi_process
callback.

    * config/tc-s390.c (md_gather_operands): Accept an instruction
        without operands if all operands are tagged as optional.

    * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
        MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
        * s390-opc.txt (nopr, nop): Use new instruction format.

2009-06-19  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_print_private_header): Fix format character.

2009-06-19  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_scan_read_symtab_symbols): Add prototype.
(bfd_mach_o_version): Use bfd_mach_o_get_data instead of direct access.
(bfd_mach_o_valid): Ditto.
(bfd_mach_o_wide_p): Ditto.
(bfd_mach_o_canonicalize_reloc): Ditto.
(bfd_mach_o_build_commands): Ditto.
(bfd_mach_o_scan_read_thread): Ditto.
(bfd_mach_o_flatten_sections): Ditto.
(bfd_mach_o_scan_start_address): Ditto.
(bfd_mach_o_lookup_section): Ditto.
(bfd_mach_o_core_fetch_environment): Ditto.
(bfd_mach_o_write_contents): Ditto.  Handle reexport_dylib.
(bfd_mach_o_scan_write_relocs): Adjust for bfd_mach_o_get_data.
(bfd_mach_o_scan_write_symtab): Ditto.
Use macros instead of hard-coded values.
(bfd_mach_o_scan_read_symtab_symbol): Make the function static.
Use bfd_mach_o_get_data instead of direct access.  Use macros
instead of hard-coded values.
(bfd_mach_o_scan_read_symtab_strtab): Make the function static.
Remove sym argument and get section from mdata.
Move code into the else branch.
(bfd_mach_o_scan_read_symtab_symbols): Make the function static.
Remove sym argument and get section from mdata.  Adjust code.
(bfd_mach_o_scan_read_dylib): Move assertion into the created
switch (which replaces consecutive if statements).
(bfd_mach_o_scan_read_dysymtab): Rename seg to cmd.  Load
module table, table of content, indirect symbols and external
referenced symbols.
(bfd_mach_o_scan_read_symtab): Renames seg to symtab.  Set symtab
field.
(bfd_mach_o_scan_read_linkedit): New function.
(bfd_mach_o_scan_read_str): Ditto.
(bfd_mach_o_count_symbols): Simplify the code by using the symtab
field of mdata.
(bfd_mach_o_get_symtab_upper_bound): Remove check as
bfd_mach_o_count_symbols never returns an error.
(bfd_mach_o_canonicalize_symtab): Simplify the code by using the
symtab field (there might be only one symtab).
(bfd_mach_o_scan_read_command): Handle reexported dylib.
Handle sub frameworks, sub umbrella, sub library and sub client.
Read code signature and segment split info commands.
(bfd_mach_o_scan): Reindent.
(bfd_mach_o_xlat_name): New type.
(bfd_mach_o_print_flags): New function.
(bfd_mach_o_get_name): Ditto.
(bfd_mach_o_cpu_name): New variable.
(bfd_mach_o_filetype_name, bfd_mach_o_header_flags_name)
(bfd_mach_o_section_type_name)
(bfd_mach_o_section_attribute_name)
(bfd_mach_o_load_command_name): New variables.
(bfd_mach_o_print_private_header): New function.
(bfd_mach_o_print_section_map): New function extracted from
bfd_mach_o_print_private_bfd_data.
(bfd_mach_o_print_section): Ditto.  Print more infos.
(bfd_mach_o_print_segment): Ditto.
(bfd_mach_o_print_dysymtab): Ditto.
(bfd_mach_o_bfd_print_private_bfd_data): Reworked.  Handle
load weak dylib, reexport dylib and id dylib.
Handle code signature and segment_split info.
Handle sub frameworks, sub umbrella, sub library and sub client.
(bfd_mach_o_section_get_nbr_indirect): New function.

* mach-o.h (BFD_MACH_O_REFERENCE_MASK): New macro.  Add comment.
(bfd_mach_o_header_flags): New enum to define header flags.
(bfd_mach_o_section_attribute): New enum to replace ...
(BFD_MACH_O_S_ATTR_LOC_RELOC, BFD_MACH_O_S_ATTR_EXT_RELOC,
BFD_MACH_O_S_ATTR_SOME_INSTRUCTIONS, BFD_MACH_O_S_ATTR_DEBUG,
BFD_MACH_O_S_SELF_MODIFYING_CODE, BFD_MACH_O_S_ATTR_LIVE_SUPPORT,
BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, BFD_MACH_O_S_ATTR_STRIP_STATIC_SYMS,
BFD_MACH_O_S_ATTR_NO_TOC, BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS): ...
these removed macros.
(BFD_MACH_O_NLIST_SIZE, BFD_MACH_O_NLIST_64_SIZE): New macros.
(bfd_mach_o_dylib_module): New type.
(BFD_MACH_O_DYLIB_MODULE_SIZE, BFD_MACH_O_DYLIB_MODULE_64_SIZE): New
macros.
(bfd_mach_o_dylib_table_of_content): New type.
(BFD_MACH_O_TABLE_OF_CONTENT_SIZE): New macro.
(bfd_mach_o_dylib_reference): New type.
(BFD_MACH_O_REFERENCE_SIZE): New macro.
(bfd_mach_o_dysymtab_command): Add fields for loaded and decoded
modules, toc, references and indirect syms.
(BFD_MACH_O_INDIRECT_SYMBOL_SIZE): New macro.
(bfd_mach_o_dylinker_command): Remove cmd and cmdsize fields (were
unused).  Add comment.
(bfd_mach_o_dylib_command): Ditto.
(bfd_mach_o_prebound_dylib_command): Ditto.
(bfd_mach_o_linkedit_command): New type.
(bfd_mach_o_str_command): New type.
(bfd_mach_o_load_command): Add linkedit and str fields.
(mach_o_data_struct): Add symtab field.
(bfd_get_mach_o_data): Renamed to ...
(bfd_mach_o_get_data): ... this new macro.
(bfd_mach_o_scan_read_symtab_symbol,
bfd_mach_o_scan_read_symtab_strtab,
bfd_mach_o_scan_read_symtab_symbols): Prototypes removed.

* mach-o-i386.c (bfd_mach_o_i386_mkobject): Use bfd_mach_o_get_data
instead of direct access.

* elf32-ppc.c (ppc_elf_check_relocs): Allow local symbols for
R_PPC_PLTREL24 relocs.
(ppc_elf_relocate_section): Likewise.

* elf32-ppc.c (find_plt_ent): Pass pointer to plist rather than
pointer to sym hash.  Update all uses.
(update_plt_info): Likewise.  Don't check addend here.

*** empty log message ***

daily update

2009-06-14  Hui Zhu  <teawater@gmail.com>
    Michael Snyder  <msnyder@vmware.com>

* infrun.c (handle_inferior_event): Reverse-next through
          trampoline.

2009-06-18  Hui Zhu  <teawater@gmail.com>
    Michael Snyder  <msnyder@vmware.com>

* infrun.c (handle_inferior_event): Improve reverse stepping
through function epilogue.

* gas/cfi/cfi-common-7.s: Skip a multiple of four.
* gas/cfi/cfi-common-7.d: Adjust.

    PR 10169
        * gas/tc-arm.c (do_t_ssat): Move common code from here...
        (do_t_usat): ... and here to...
        (do_t_ssat_usat): New function: ... here.  Add code to check that
        the shift value, if present, is in range.

        * gas/arm/thumb2_bad_reg.s: Add tests for SSAT and USAT with an
        out of range shift.
        * gas/arm/thumb2_bad_reg.l: Update expected error messages.

2009-06-18  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_check_relocs): Remove isymbuf and use
bfd_sym_from_r_symndx.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.

* elf-bfd.h (struct sym_sec_cache): Delete.
(struct sym_cache): New.
(bfd_section_from_r_symndx): Delete prototype.
(bfd_sym_from_r_symndx): Define prototype.
* elf.c (bfd_section_from_r_symndx): Delete, replace with..
(bfd_sym_from_r_symndx): ..new function.
* elf32-arm.c: Update all uses of struct sym_sec_cache and
bfd_section_from_r_symndx to new struct and function.
* elf32-bfin.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-m32r.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-m68hc1x.h: Likewise.
* elf32-m68k.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-sh.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elf64-x86-64.c: Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-sparc.h: Likewise.

2009-06-18  Paul Pluzhnikov  <ppluzhnikov@google.com>

* dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
dwarf_frame_size.

2009-06-18  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_check_relocs): Cache or free isymbuf.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.

    * elflink.c (elf_link_sort_relocs): Return early if there are no
        relocs to sort.

Fix formatting of recent entry

    PR 10288
        * arm-dis.c (print_insn_coprocessor): Check that a user specified
        ARM architecture supports the matched instruction.
        (print_insn_arm): Likewise.
        (select_arm_features): New function.  Fills in the fields of an
        arm_feature_set structure based on a given arm machine number.
        (print_insn): Initialise an arm_feature_set structure.

        * objdump.c (disassemble_bytes): Set the
        USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure
        if the user has invoked the -m switch.
        * doc/binutils.texi: Document the additional behaviour of
        objdump's -m switch for ARM targets.

        * dis-asm.h (USER_SPECIFIED_MACHINE_TYPE): New value for the flags
        field of struct disassemble_info.

        * gas/arm/align.s: Add labels so that COFF based targets can
        correctly locate THUMB code.
        * gas/arm/copro.d: Do not pass --architecture switch to objdump.

* ld-pe/pe-run.exp (proc test_direct_link_dll):  Always pass
--enable-auto-import to the linker.
* ld-pe/vers-script-1.d:  Replace '\$' by '_' in all symbol names.
* ld-pe/vers-script-3.d:  Likewise.
* ld-pe/vers-script-4.d:  Likewise.
* ld-pe/vers-script-dll.c:  Likewise.
* lib/ld-lib.exp (proc is_pecoff_format):  Also return true for
"*-*-cegcc*" targets.

2009-06-18  Dave Korn  <dave.korn.cygwin@gmail.com>

Merge cegcc and mingw32ce target name changes from CeGCC project,
replacing "arm-*-" by "arm*-*-" where needed.

  2008-09-24  Pedro Alves  <pedroalves@users.sourceforge.net>

ld/
* configure.tgt (arm*-*-cegcc*): Set LIB_PATH to
${tooldir}/lib/w32api.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

bfd/
* config.bfd: Add arm*-*-cegcc* target.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

binutils/
* configure.in: Add arm*-*-cegcc* and arm*-*-mingw32ce* targets.
* configure: Regenerate.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

gas/
* configure.tgt: Add arm*-*-cegcc* target.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

ld/
* configure.tgt: Add arm*-*-cegcc* target.

  2007-12-17  Pedro Alves  <pedro_alves@portugalmail.pt>

bfd/
* config.bfd: Add arm-*-mingw32ce* target.

  2007-12-17  Pedro Alves  <pedro_alves@portugalmail.pt>

gas/
* configure.tgt: Add arm-*-mingw32ce* target.

  2007-12-17  Pedro Alves  <pedro_alves@portugalmail.pt>

ld/
* configure.tgt: Add arm-*-mingw32ce* target.

2009-06-17  H.J. Lu  <hongjiu.lu@intel.com>

* elf-bfd.h (_bfd_elf_allocate_ifunc_dyn_relocs): New.
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Likewise.
* elf32-i386.c (elf_i386_allocate_dynrelocs): Use it.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Likewise.

2009-06-17  H.J. Lu  <hongjiu.lu@intel.com>

* elf-bfd.h (_bfd_elf_create_ifunc_dyn_reloc): New.
* elf-ifunc.c (_bfd_elf_create_ifunc_dyn_reloc): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Use it.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.

2009-06-17  H.J. Lu  <hongjiu.lu@intel.com>

* elf-bfd.h (elf_dyn_relocs): New.

* elf32-i386.c (elf_i386_dyn_relocs): Removed.
(elf_i386_link_hash_entry): Replace elf_i386_dyn_relocs with
elf_dyn_relocs.
(elf_i386_copy_indirect_symbol): Likewise.
(elf_i386_check_relocs): Likewise.
(elf_i386_gc_sweep_hook): Likewise.
(elf_i386_allocate_dynrelocs): Likewise.
(elf_i386_readonly_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.

* elf64-x86-64.c (elf64_x86_64_dyn_relocs): Removed.
(elf64_x86_64_link_hash_entry): Replace elf64_x86_64_dyn_relocs
with elf_dyn_relocs.
(elf64_x86_64_copy_indirect_symbol): Updated.
(elf64_x86_64_check_relocs): Likewise.
(elf64_x86_64_gc_sweep_hook): Likewise.
(elf64_x86_64_adjust_dynamic_symbol): Likewise.
(elf64_x86_64_allocate_dynrelocs): Likewise.
(elf64_x86_64_readonly_dynrelocs): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.

*** empty log message ***

daily update

* lib/gdb.exp (gdb_compile): Also force unbuffered mode for DJGPP
target.

* dwarf2read.c (zlib_decompress_section): Use a cleanup.

* gdbarch.sh (pointer_to_address): Change to type 'm'.
(address_to_pointer): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

* inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
(signed_pointer_to_address): Likewise.
(unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
* findvar.c (unsigned_pointer_to_address): Likewise.
(signed_pointer_to_address): Likewise.
(unsigned_address_to_pointer, address_to_signed_pointer): Likewise.

* avr-tdep.c (avr_address_to_pointer): Likewise.
(avr_pointer_to_address): Likewise.
* iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
(iq2000_address_to_pointer): Likewise.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
(m32c_m16c_pointer_to_address): Likewise.
* spu-tdep.c (spu_pointer_to_address): Likewise.
* xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Likewise.

ChangeLog:

* printcmd.c (print_scalar_formatted): Always truncate
unsigned data types.

* cli-dump.c (struct callback_data): Change type of load_offset
to CORE_ADDR.
(restore_binary_file): Update type casts.
(restore_command): Parse load_offset as address, not long.

* utils.c (string_to_core_addr): Do not sign-extend value.
* varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
before comparing against requested frame address.

testsuite/ChangeLog:

* gdb.base/dump.exp: Handle SPU like 64-bit platforms.

* gdbarch.sh (gcore_bfd_target): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.

* gcore.c (default_gcore_target): Make return value const.
Call gdbarch_gcore_bfd_target if present.
(default_gcore_arch, default_gcore_mach): Use target_gdbarch.

* corelow.c (core_read_description): Call gdbarch_core_read_description
on core_gdbarch instead of current_gdbarch.

* ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.

* gdbtypes.c (create_string_type): Receive character type as argument.
* gdbtypes.h (create_string_type): Add character type argument.
        * dwarf2read.c (read_tag_string_type): Pass character type to
create_string_type.

* value.h (value_string): Add character type argument.
* valops.c (value_string): Add character type argument.  Pass it to
create_string_type.  Do not allocate space in inferior.
* valarith.c (value_concat): Pass character type to value_string.

* value.h (value_typed_string): Rename to ...
(value_cstring): ... this.
* valops.c (value_typed_string): Rename to ...
(value_cstring): ... this.
* c-lang.c (evaluate_subexp_c): Update.

* python/python-value.c (builtin_type_pychar): New define.
(convert_value_from_python): Call value_cstring instead
of value_from_string.
* value.c (value_from_string): Remove.
* value.h (value_from_string): Remove.

* eval.c (evaluate_subexp_standard): Pass character type to
value_string.  Pass expression architecture to value_nsstring
and lookup_child_selector.
* objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
(lookup_child_selector): Likewise.
(value_nsstring): Likewise.
* objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
Pass character type to value_string..
(lookup_child_selector): Likewise.
(value_nsstring): Add GDBARCH parameter, use it instead of
objfile architecture.  Pass architecture to lookup_objc_class
and lookup_child_selector. Pass character type to value_string.
(end_msglist): Pass architecture to lookup_objc_class.
* objc-exp.y: Pass architecture to lookup_objc_class.

* gdbtypes.h (struct language_defn): Add forward declaration.
(lookup_typename): Add LANGUAGE and GDBARCH parameters.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
* gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
Use them instead of current_language and current_gdbarch.
(lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
Pass them to lookup_typename.
(lookup_signed_typename): Likewise.

* c-exp.y: Pass parse_language and parse_gdbarch to
lookup_unsigned_typename and lookup_signed_typename.
* objc-exp.y: Likewise.
* m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.

* c-lang.c (evaluate_subexp_c): Pass expression language and
gdbarch to lookup_typename.
* printcmd.c (printf_command): Pass current language and
gdbarch to lookup_typename.
* python/python-type.c (typy_lookup_typename): Likewise.
Include "language.h".

* sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
Use it instead of current_gdbarch.  Pass architecture to
sparc32_gregset_supplies_p.
(sparc64_fpregset_supplies_p): Add GDBARCH parameter.  Use it instead
of current_gdbarch.  Pass architecture to sparc32_fpregset_supplies_p.
* sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
sparc64nbsd_fpregset_supplies_p): Likewise.
* sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
Add GDBARCH parameter.
(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
(sparc_fetch_inferior_registers): Pass regcache architecture to
sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
(sparc_store_inferior_registers): Likewise.
* sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
Add GDBARCH parameter.
(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.

* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
of current_gdbarch.
* aix-thread.c (pd_enable): Likewise.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* bsd-uthread.c (bsd_uthread_activate): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
* nto-procfs.c (procfs_open): Likewise.
* procfs.c (invalidate_cache, procfs_insert_watchpoint,
info_proc_mappings, info_mappings_callback): Likewise.
* record.c (record_open): Likewise.
* rs6000-nat.c (ARCH64): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
(darwin_bfd_open): Likewise.
* memattr.c (mem_info_command): Likewise.

* windows-nat.c (win32_resume): Use current regcache architecture
instead of current_gdbarch.

* dbug-rom.c (dbug_regname): Remove check against number of
registers in current_gdbarch.
* solib-pa64.c (read_dynamic_info): Remove unused variable.

* dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
use it instead of current_gdbarch.
* frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
* arm-tdep.c (arm_skip_prologue): Pass architecture to
deprecated_pc_in_call_dummy.

* symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
Use it instead of current_gdbarch.
* symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
* breakpoint.c (expand_line_sal_maybe): Pass architecture to
skip_prologue_using_sal.
* arm-tdep.c (skip_prologue_using_sal): Likewise.
* lm32-tdep.c (lm32_skip_prologue): Likewise.
* m32-tdep.c (m32c_skip_prologue): Likewise.
* mips-tdep.c (mips_skip_prologue): Likewise.
* moxie-tdep.c (moxie_skip_prologue): Likewise.
* mt-tdep.c (mt_frame_unwind_cache): Likewise.
* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
* frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
it to skip_prologue_using_sal.  Update call sites ...
(frv_skip_prologue, frv_frame_unwind_cache): ... here.

* mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
(check_for_saved): Use it instead of current_gdbarch.
(mn10300_analyze_prologue): Set it.

* value.c (using_struct_return): Add GDBARCH parameter.  Use it
instead of current_gdbarch.
* value.h (using_struct_return): Add GDBARCH parameter.
* eval.c (evaluate_subexp_standard): Pass architecture to
using_struct_return.
* infcall.c (call_function_by_hand): Likewise.
* stack.c (return_command): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

* symtab.c (in_prologue): Add GDBARCH parameter.  Use it instead of
current_gdbarch.
* symtab.h (in_prologue): Add GDBARCH parameter.
* infrun.c (handle_inferior_event): Pass architecture to in_prologue.

* eval.c (evaluate_subexp_standard): Use expression architecture
instead of current_gdbarch.

* c-lang.c (evaluate_subexp_c): Use expression architecture and
language instead of current_gdbarch and current_language.

* printcmd.c (do_one_display): Use expression architecture instead
of current_gdbarch.

* infcmd.c (print_return_value): Use architecture of stop_regcache
instead of current_gdbarch.
(print_vector_info, print_float_info): Remove GDBARCH argument,
use frame architecture instead.
(vector_info, float_info): Update calls.

* objc-lang.c (objc_skip_trampoline): Use frame architecture
instead of current_gdbarch.

* parse.c (write_dollar_variable): Use parse architecture instead
of current_gdbarch.

* source.c (line_info): Use objfile architecture instead of
current_gdbarch.

* symtab.c (find_function_start_sal): Use gdbarch instead of
current_gdbarch.
(print_msymbol_info): Use objfile architecture instead of
current_gdbarch.

* valops.c (value_assign): Use frame architecture instead of
current_gdbarch.

* buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.

* coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
calling record_line.
(enter_linenos): Likewise.
* dbxread.c (process_one_symbol): Likewise.
* dwarf2read.c (dwarf_decode_lines): Likewise.
* mdebugread.c (psymtab_to_symtab_1): Likewise.
* xcoffread.c (enter_line_range): Likewise.

* ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
architecture instead of current_gdbarch.
(gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
(gen_expr): Pass expression to get_struct_ref.

* symtab.h (struct symbol_ops): Add GDBARCH parameter to
tracepoint_var_ref callback.
* ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
symbol operation callback.
* dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
Use it instead of current_gdbarch.
(locexpr_tracepoint_var_ref): Add GDBARCH parameter.  Pass it to
dwarf2_tracepoint_var_ref.
(loclist_tracepoint_var_ref): Likewise.

* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
Use it instead of address bits of current_gdbarch.
* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
* arm-tdep.c (thumb_analyze_prologue): Pass address bits to
make_pv_area.
(arm_scan_prologue): Likewise.
* m32c-tdep.c (m32c_analyze_prologue): Likewise.
* mep-tdep.c (mep_analyze_prologue): Likewise.
* mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
* s390-tdep.c (s390_analyze_prologue): Likewise.

ChangeLog:

* mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
frame architecture instead of current_gdbarch.
(mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_list_register_values): Likewise.  Pass selected
frame to get_register.
(get_register): Add FRAME argument, use it as frame to retrieve
registers from (instead of selected frame).  Use frame architecture
instead of current_gdbarch.
(mi_cmd_data_write_register_values): Use current regcache
architecture instead of current_gdbarch.

testsuite/ChangeLog:

* gdb.mi/gdb680.exp: Update test for error message.

* tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
use frame architecture instead.  Replace current_gdbarch uses.
(tui_show_registers): Update call.
(tui_get_register): Remove GDBARCH parameter; use frame architecture
instead.
(tui_show_register_group): Update call.
(tui_check_register_values): Likewise.
(tui_register_format): Remove GDBARCH parameter; use frame
architecture instead.  Replace current_gdbarch uses.
(tui_get_register): Update call.

* gdbarch.sh (construct_inferior_arguments): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* infcmd.c (get_inferior_args): Call construct_inferior_arguments
directly instead of gdbarch_construct_inferior_arguments.
(construct_inferior_arguments): Remove GDBARCH argument.
* inferior.h (construct_inferior_arguments): Likewise.

* symfile.c (section_is_mapped): Use objfile architecture instead
of current_gdbarch.
(TARGET_LONG_BYTES): Remove.
(read_target_long_array): Add SIZE argument.  Use it instead of
TARGET_LONG_BYTES.
(simple_read_overlay_table): Retrieve long size from objfile
architecture; pass it to read_target_long_array.
(simple_read_overlay_region_table): Likewise.
(simple_overlay_update_1): Likewise.

* infrun.c (cleanup_displaced_step_closure): Remove.
(displaced_step_clear_cleanup): Move to before displaced_step_prepare.
(displaced_step_prepare): Use displaced_step_clear_cleanup instead
of cleanup_displaced_step_closure.
(handle_inferior_event, keep_going): Use thread architecture instead
of current_gdbarch.

ChangeLog:

* infrun.c (handle_inferior_event): Use current frame architecture
or thread architecture instead of current_gdbarch.  Pass to
handle_step_into_function and handle_step_into_function_backward.
(handle_step_into_function): Add GDBARCH parameter.  Use it instead
of current_gdbarch.
(handle_step_into_function_backward): Likewise.
(insert_step_resume_breakpoint_at_frame): Use frame architecture
instead of current_gdbarch.
(insert_step_resume_breakpoint_at_caller): Likewise.

testsuite/ChangeLog:

* gdb.base/annota1.exp: Allow multiple occurrences of the
frames-invalid annotation.
* gdb.cp/annota2.exp: Likewise.

2009-06-17  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-arm.c (create_got_section): Get existing .rela.got
section.
* elf32-hppa.c (elf32_hppa_create_dynamic_sections): Likewise.
* elf32-lm32.c (create_got_section): Likewise.
* elf32-m32r.c (create_got_section): Likewise.
* elf32-ppc.c (ppc_elf_create_got): Likewise.
* elf32-s390.c (create_got_section): Likewise.
* elf32-sh.c (create_got_section): Likewise.
* elf32-xtensa.c (elf_xtensa_create_dynamic_sections): Likewise.
* elf64-s390.c (create_got_section): Likewise.
* elfxx-sparc.c (create_got_section): Likewise.

* elflink.c (_bfd_elf_create_got_section): Properly initialize
the GOT size.

2009-06-17  Michael Eager <eager@eagercon.com>

        * COPYING.LIBGLOSS: Add Xilinx license.

Undo accidental checkin of bogus change

* infcmd.c (post_create_inferior): Call breakpoint_re_set after target
is pushed for watchpoint promotion to hardware watchpoint.

*** empty log message ***

daily update

2009-06-16  Paul Pluzhnikov  <ppluzhnikov@google.com>

* dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
(dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
(dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
(dwarf_ranges_section, dwarf_frame_section)
(dwarf_eh_frame_section): Removed.
(dwarf2_resize_section): Likewise.
(dwarf2_read_section): Now static, use bfd_mmap() if possible.
(dwarf2_get_section_info): New function.
(munmap_section_buffer): Likewise.
(dwarf2_per_objfile_cleanup): Likewise.
(section_is_p): Signature change.
* dwarf2-frame.c (dwarf2_build_frame_info): Use
dwarf2_get_section_info instead of dwarf2_read_section.

2009-06-16  Paul Pluzhnikov  <ppluzhnikov@google.com>

* solib.c (symbol_add_stub): New FLAGS parameter.
(solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
directly.
(solib_add): Defer breakpoint_re_set until after all solibs.
* bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
* rs6000-nat.c (objfile_symbol_add): Adjust.
* symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
(new_symfile_objfile): Likewise.
(symbol_file_add_with_addrs_or_offsets): Likewise.
(symbol_file_add_from_bfd): Likewise.
(symbol_file_add): Likewise.
* symfile.h (enum symfile_add_flags): New. Adjust prototypes.
* symfile-mem.c (symbol_file_add_from_memory): Adjust.
* windows-nat.c (safe_symbol_file_add_stub): Adjust.
* machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.

* linespec.c (collect_methods): Delete.
(add_matching_methods): Reove destructor special case.
(find_method): Call find_methods directly instead of
collect_methods.
* valops.c (value_struct_elt): Remove destructor
special cases.
(check_field): Likewise.
(value_struct_elt_for_reference): Likewise.
(destructor_name_p): Remove misleading comment about dtors
being "special cases".
* gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
* gdbtypes.c (get_destructor_fn_field): Likewise.

* mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
TARGET_OJECT_MEMORY reads to the topmost target, not the the
flattened current_target.

2009-06-16  H.J. Lu  <hongjiu.lu@intel.com>

* elf-bfd.h (ELF_LOCAL_SYMBOL_HASH): New.

* elf32-i386.c (elf_i386_local_hash): Removed.
(elf_i386_local_htab_hash): Use ELF_LOCAL_SYMBOL_HASH.
(elf_i386_get_local_sym_hash): Likewise.

* elf64-x86-64.c (elf64_x86_64_local_hash): Removed.
(elf64_x86_64_local_htab_hash): Use ELF_LOCAL_SYMBOL_HASH.
(elf64_x86_64_get_local_sym_hash): Likewise.
* elfxx-ia64.c (elfNN_ia64_local_htab_hash): Likewise.
(get_local_sym_hash): Likewise.

2009-06-16  H.J. Lu  <hongjiu.lu@intel.com>

* elfxx-ia64.c (elfNN_ia64_link_hash_table): Remove got_sec,
rel_got_sec and plt_sec.
(elfNN_ia64_relax_section): Updated.
(elfNN_ia64_create_dynamic_sections): Likewise.
(get_got): Likewise.
(allocate_dynrel_entries): Likewise.
(elfNN_ia64_size_dynamic_sections): Likewise.
(set_got_entry): Likewise.
(elfNN_ia64_choose_gp): Likewise.
(elfNN_ia64_relocate_section): Likewise.
(elfNN_ia64_finish_dynamic_symbol): Likewise.
(elfNN_ia64_finish_dynamic_sections): Likewise.

* elf32-spu.c (needs_ovl_stub): Respect .brinfo lrlive bits
also for calls.