* coff-solib.c (coff_solib_add): If readsyms is zero don't read
symbols but do any other needed work for shared libs.
* irix5-nat.c: Ditto.
* osfsolib.c (solib_add): Ditto.
* solib.c (solib_add): Ditto.
* win32-nat.c (child_solib_add): Ditto.
* xcoffsolib.c (solib_add): Ditto.
* irix5-nat.c (sharedlibrary_command): Pass 1 as readsyms to
solib_add to force reading of shared library symbols.
* osfsolib.c (sharedlibrary_command;): Ditto.
* pa64solib.c (pa64_solib_sharedlibrary_command): Ditto.
* solib.c (sharedlibrary_command): Ditto.
* somsolib.c (som_solib_sharedlibrary_command): Ditto.
* xcoffsolib.c (sharedlibrary_command): Ditto.
Stephane Carrez [Thu, 1 Nov 2001 09:56:17 +0000 (09:56 +0000)]
* config/tc-m68hc11.c (build_jump_insn): Allocate worst case storage
for bra/bsr and use frag_variant(), this ensure that the possible
16-bit BFD_RELOC_16 will be in the same frag.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
Corinna Vinschen [Wed, 31 Oct 2001 20:59:22 +0000 (20:59 +0000)]
* gdb.base/miscexprs.c (main): Add usage of preprocessor
symbol `STORAGE' to allow to choose the storage class of
the local datastructures.
* gdb.base/miscexprs.exp: Handle setting a `-DSTORAGE=...'
compiler directive.
* win32-nat.c (register_loaded_dll): Attempt to ensure that the case of the
loaded DLL matches the on-disk case since the debugging API does not seem to
ensure this. Calculate max name length here.
(handle_load_dll): Move max name length calculation to register_loaded_dll.
Richard Earnshaw [Wed, 31 Oct 2001 14:48:23 +0000 (14:48 +0000)]
General cleanup of feature definitions.
* tc-arm.c (ARM_EXT_LONGMUL, ARM_EXT_HALFWORD, ARM_EXT_THUMB): Delete.
(ARM_2UP, ARM_ALL, ARM_3UP, ARM_6UP): Delete.
(FPU_CORE, FPU_FPA10, FPA_FPA11, FPU_ALL, FPA_MEMMULTI): Delete.
(ARM_EXT_V{1,2,2S,3,3M,4,4T,5T,5ExP}): New defines.
(ARM_EXT_V{5,5E}): Synchronize with above.
(ARM_ARCH_V*): Define a complete set in terms of above features.
(ARM_{1,2,3,250,6,7,8,9,STRONG}): Define in terms of architecture.
(FPU_FPA_EXT_V[12]): Define.
(FPU_ARCH_FPE, FPU_ARCH_FPA): Define in terms of above.
(FPU_ANY): Define.
(FPU_DEFAULT): Default to FPA.
(CPU_DEFAULT): For XScale, this is now just ARM_ARCH_XSCALE; for
Thumb, this is now ARM_ARCH_V5T.
(insns): Rework for new feature defines.
(tinsns): Likewise.
(opcode_select, do_ldst, md_begin, md_parse_option): Likewise.
Fred Fish [Tue, 30 Oct 2001 17:34:30 +0000 (17:34 +0000)]
2001-10-30 Fred Fish <fnf@redhat.com>
* somsolib.c (som_solib_add): A megabyte is 1024*1024 bytes.
* pa64solib.c (add_to_solist): Ditto.
* win32-nat.c (_initialize_inftarg): Remove unnecessary
initialization of auto_solib_add, it defaults to 1.
Fred Fish [Tue, 30 Oct 2001 04:05:36 +0000 (04:05 +0000)]
Changes approved by kev@cygnus.com, ezannoni@cygnus.com, eliz@is.elta.co.il.
Changelog:
2001-10-27 Fred Fish <fnf@redhat.com>
* symfile.c (auto_solib_add): Update comment to note that
this variable is now just used as a boolean to control shlib
autoloading, and clarify when it is used.
* symfile.h (auto_solib_add): Ditto.
* symfile.c (auto_solib_limit): New variable that holds the
autoloading threshold instead of overloading auto_solib_add.
* symfile.h (auto_solib_limit): Ditto.
* pa64solib.c (pa64_solib_total_st_size): Update comment to
note that the new auto_solib_limit variable is used instead
of overloading auto_solib_add variable.
(_initialize_pa64_solib): Ditto.
* somsolib.c (som_solib_total_st_size): Ditto.
(_initialize_som_solib): Ditto.
* pa64solib.c (_initialize_pa64_solib): Add new set/show
commands for auto-solib-limit variable.
* somsolib.c (_initialize_som_solib): Ditto
* pa64solib.c (add_to_solist): Check that auto_solib_add is
set and use auto_solib_limit as the threshold size instead
of auto_solib_add.
* somsolib.c (som_solib_add): Ditto, and also change warning
text about size threshold exceeded.
doc/ChangeLog:
2001-10-28 Fred Fish <fnf@redhat.com>
* gdb.texinfo (auto-solib-add): Change docs to match
implementation change.
(auto-solib-limit): Add docs for new variable.
Mark Kettenis [Mon, 29 Oct 2001 23:54:56 +0000 (23:54 +0000)]
* config/i386/tm-i386v.h: Don't include "regcache.h".
(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, FRAME_CHAIN,
FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_NUM_ARGS):
Remove macros. The versions from "tm-i386.h" should work fine
(and in most cases even better).
Mark Kettenis [Mon, 29 Oct 2001 23:49:31 +0000 (23:49 +0000)]
* i386-tdep.c (i386_extract_return_value): Use
convert_typed_floating to extract floating-point value from
register buffer.
(i386_store_return_value): Use convert_typed_floating to store
floating-point return balue in register buffer
(i386_register_virtual_type): Change type of floating-point
registers to builtin_type_i387_ext.
(i386_register_convert_to_virtual): Use convert_typed_floating to
do the conversion.
(i386_register_convert_to_raw): Likewise.
Corinna Vinschen [Mon, 29 Oct 2001 18:20:22 +0000 (18:20 +0000)]
* gdb.base/call-ar-st.c (print_double_array): Match for loop
with new double_array size.
(main): Change storage class of all local variables to static.
Reduce size of double_array to 9.
* gdb.base/call-ar-st.exp: Increase timeout value.
Change expected output for double array to match new size in
call-ar-st.c.
Mark Kettenis [Sun, 28 Oct 2001 22:06:27 +0000 (22:06 +0000)]
* doublest.c: Improve comments a bit.
(floatformat_from_length): New function.
(NAN): Define to 0.0 if not already defined.
(extract_floating): Rewrite to use floatformat_from_length. Warn
instead of error if LEN doesn't match a known floating-point type,
and return NaN (or 0.0 if NaN isn't available) in that case.
(store_floating): Likewise, but zero out the target byte-stream if
LEN doesn't match a known floating-point type.
(extract_typed_floating): Reformat a bit.
(store_typed_floating): Reformat a bit. Add comment about zeroing
out padding in the target buffer.
* doublest.h (extract_floating, store_floating): Fix comment about
deprecation of these functions. Add parameter names to prototypes.
Orjan Friberg [Fri, 26 Oct 2001 14:54:24 +0000 (14:54 +0000)]
2001-10-26 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c (constraint): Loop through the whole cris_spec_regs
struct, not just the NUM_SPECREGS first entries.
(bdap_prefix): Read PC before autoincrement.
Corinna Vinschen [Fri, 26 Oct 2001 09:29:31 +0000 (09:29 +0000)]
* win32-nat.c (DebugSetProcessKillOnExit): New static function
pointer to Windows' DebugSetProcessKillOnExit() function.
(DebugActiveProcessStop): Ditto for DebugActiveProcessStop().
(has_detach_ability): New function.
(child_attach): If system has detach ability, enable it.
(child_detach): If system has detach ability, actually
detach from process.
Change tty output to Linux format.
Andrew Cagney [Fri, 26 Oct 2001 04:37:54 +0000 (04:37 +0000)]
Chirp fixes:
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
Jim Blandy [Wed, 24 Oct 2001 17:10:18 +0000 (17:10 +0000)]
Isolate STABS readers' use of the `textlow' and `texthigh' fields
of `struct partial_symtab' to only a few locations. This change
is not supposed to affect the way the values are computed, only
where they live.
* dbxread.c (struct symloc): Add `textlow' and `texthigh' fields
to the reader-specific structure.
* mdebugread.c (struct symloc): Same.
* dbxread.c (TEXTLOW, TEXTHIGH): New accessor macros.
* mdebugread.c (TEXTLOW, TEXTHIGH): Same.
* dbxread.c (dbx_symfile_read): After we've built all our partial
symbol tables, set each partial symtab's `textlow' and `texthigh'
fields from our reader-specific structure.
* mdebugread.c (mdebug_build_psymtabs): Same.
* dbxread.c (start_psymtab): Initialize the reader-specific
structure's `textlow' and `texthigh' from the new psymtab's.
* mdebugread.c (parse_partial_symbols, new_psymtab): Same.
* dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab): Use
the reader-specific `textlow' and `texthigh', not the generic
psymtab fields.
* mdebugread.c (parse_lines, parse_partial_symbols,
psymtab_to_symtab_1): Same.
* partial-stab.h: Same.
Chris Demetriou [Tue, 23 Oct 2001 19:20:28 +0000 (19:20 +0000)]
[opcodes/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
projects / deliverable / binutils-gdb.git / log
