Pedro Alves [Tue, 13 Dec 2011 17:22:11 +0000 (17:22 +0000)]
gdb/doc/
2011-12-13 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main. Mention the need to get past the initial breakpoint.
gdb/testsuite/
2011-12-13 Pedro Alves <pedro@codesourcery.com>
Doug Evans <dje@google.com>
* lib/gdb.exp (gdb_run_cmd, runto_main, gdb_compile)
(clean_restart): Remove references to the gdb_stub target board
variable.
(gdb_step_for_stub): Delete.
Pedro Alves [Tue, 13 Dec 2011 16:11:26 +0000 (16:11 +0000)]
2011-12-13 Pedro Alves <pedro@codesourcery.com>
PR remote/13492
* i386-low.c (i386_low_stopped_data_address): Avoid fetching
DR_CONTROL unless necessary. Extend comments.
* linux-x86-low.c (x86_linux_prepare_to_resume): Don't write to
DR0-3 if not used. If any watchpoint was set, clear DR_STATUS.
* dwarf2.c (bfd_dwarf2_cleanup_debug_info): Accept stash as an
argument like other functions to support formats other than ELF.
* elf-bfd.h (bfd_dwarf2_cleanup_debug_info): Move to bfd-in.h.
* elf.c (_bfd_elf_close_and_cleanup): Pass dwarf2_find_line_info
in tdata as a parameter.
* libbfd-in.h (bfd_dwarf2_cleanup_debug_info): Move from
elf-bfd.h.
* libbfd.h (bfd_dwarf2_cleanup_debug_info): Regenerate.
* mach-o-target.c (bfd_mach_o_close_and_cleanup): Remove the
fallback macro.
(bfd_mach_o_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Add the definition
which calls _bfd_dwarf2_find_nearest_line.
(bfd_mach_o_close_and_cleanup): Likewise.
* mach-o.h (mach_o_data_struct): Add dwarf2_find_line_info.
(bfd_mach_o_find_nearest_line): Add declaration.
(bfd_mach_o_close_and_cleanup): Add declaration.
Alan Modra [Tue, 13 Dec 2011 08:19:02 +0000 (08:19 +0000)]
* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
Joel Brobecker [Sun, 11 Dec 2011 17:37:56 +0000 (17:37 +0000)]
[Ada] Make the exception_support_info data per inferior.
The ada-lang module was using a static global called "exception_info"
for all inferiors. But each inferior might be different, and thus
this patch makes this data per-inferior.
gdb/ChangeLog:
* ada-lang.c (struct ada_inferior_data) [exception_info]:
New field.
(exception_info): Delete.
(ada_exception_support_info_sniffer): Get exception_support_info
data from our per-inferior data. Adjust code accordingly.
(ada_unhandled_exception_name_addr_from_raise): Likewise.
(ada_exception_name_addr_1, ada_exception_sym_name): Ditto.
(ada_executable_changed_observer): Delete.
(_initialize_ada_language): Remove call to
observer_attach_executable_changed.
Joel Brobecker [Sun, 11 Dec 2011 17:36:10 +0000 (17:36 +0000)]
Warn if missing debug info for Ada exception catchpoints
This patch should help the user understand why the debugger is not
able to insert Ada exception catchpoints when the Ada runtime was
stripped of debugging info, as is often the case on many GNU/Linux
distros:
(gdb) catch exception
Your Ada runtime appears to be missing some debugging information.
Cannot insert Ada exception catchpoint in this configuration.
gdb/ChangeLog:
* ada-lang.c (ada_has_this_exception_support): Raise an error
if we could find the Ada exception hook in the Ada runtime,
but no debugging info for that hook.
gdb/testsuite/ChangeLog:
* gdb.ada/catch_ex.exp, gdb.ada/mi_catch_ex.exp: Adjust
expected output for unsupported case.
Joel Brobecker [Sun, 11 Dec 2011 17:35:34 +0000 (17:35 +0000)]
Ada exception catchpoint support cleanup.
This patch cleans up a bit the way we detect which type of runtime
the program uses with respect to Ada exceptions. It also removes
an unnecessary check in ada_exception_sal which is already performed
by ada_exception_support_info_sniffer.
Some of the changes are preparation work for detecting the situation
where the Ada runtime is found, but lacking debugging info.
gdb/ChangeLog:
* ada-lang.c (ada_has_this_exception_support): New function,
extracted out of ada_exception_sal and ada_exception_sal.
(ada_exception_support_info_sniffer): Simplify by using
ada_has_this_exception_support.
(ada_exception_sal): Replace unnecessary checks by assertions.
Minor simplifications.
Dave Anglin [Sun, 11 Dec 2011 15:42:10 +0000 (15:42 +0000)]
PR binutils/13476
* elf32-hppa.c (final_link_relocate): Convert R_PARISC_TLS_GD21L,
R_PARISC_TLS_LDM21L and R_PARISC_TLS_IE21L relocations to
R_PARISC_DPREL21L when not doing a shared link. Likewise convert
R_PARISC_TLS_GD14R, R_PARISC_TLS_LDM14R and R_PARISC_TLS_IE14R to
R_PARISC_DPREL14R. Handle R_PARISC_TLS_GD21L, R_PARISC_TLS_LDM21L
and R_PARISC_TLS_IE21L with R_PARISC_DLTIND21L.
David Daney [Sun, 11 Dec 2011 02:05:40 +0000 (02:05 +0000)]
2011-12-10 David Daney <david.daney@cavium.com>
* elfxx-mips.c (mips_elf_link_hash_table.rld_value): Remove.
(mips_elf_link_hash_table.rld_symbol): New field;
(MIPS_ELF_RLD_MAP_SIZE): New macro.
(_bfd_mips_elf_add_symbol_hook): Remember __rld_obj_head symbol
in rld_symbol.
(_bfd_mips_elf_create_dynamic_sections): Remember __rld_map symbol
in rld_symbol.
(_bfd_mips_elf_size_dynamic_sections): Set correct size for .rld_map.
(_bfd_mips_elf_finish_dynamic_symbol): Remove .rld_map handling.
(_bfd_mips_elf_finish_dynamic_sections): Use rld_symbol to
calculate DT_MIPS_RLD_MAP value.
(_bfd_mips_elf_link_hash_table_create): Initialize rld_symbol,
quit initializing rld_value.
Jan Kratochvil [Sat, 10 Dec 2011 15:58:14 +0000 (15:58 +0000)]
gdb/testsuite/
* gdb.cp/static-method.exp (have_gcc_45682_fixed, info addr A::func()):
New variable, new test.
(list static-method.cc:xxx::(anonymous namespace)::A::func)
(list 'static-method.cc:xxx::(anonymous namespace)::A::func')
(list 'static-method.cc':'xxx::(anonymous namespace)::A::func')
(list static-method.cc:'xxx::(anonymous namespace)::A::func'): KFAIL
them if HAVE_GCC_45682_FIXED is not set.
Andrew Pinski [Thu, 8 Dec 2011 20:47:27 +0000 (20:47 +0000)]
bfd:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
* mips-tdep.c (extended_offset): Correct calculation.
(unpack_mips16): Correct bitfield positions used for extraction
of the immediate argument; fix sign-extension of same.
(extended_mips16_next_pc): Correct B instruction's offset
calculation. Correct register decoding of the BEQZ and BNEZ
as well as jump-register instructions. Handle compact jumps.
* gas/config/tc-arm.c (ARM_IT_MAX_OPERANDS): New define.
(arm_it): Use ARM_IT_MAX_OPERANDS.
(neon_select_shape): Ensure we have matched all operands.
* gas/testsuite/gas/arm/neon-suffix-bad.l: Add testcase.
* gas/testsuite/gas/arm/neon-suffix-bad.s: Likewise.
Pedro Alves [Wed, 7 Dec 2011 15:00:34 +0000 (15:00 +0000)]
2011-12-07 Pedro Alves <pedro@codesourcery.com>
* gdb.ada/catch_ex.exp: Skip as unsupported if "catch exception"
throws "Cannot insert catchpoints in this configuration".
* gdb.ada/mi_catch_ex.exp: Likewise.
David Daney [Wed, 7 Dec 2011 03:50:10 +0000 (03:50 +0000)]
2011-12-06 David Daney <david.daney@cavium.com>
* readelf.c (dynamic_section_mips_val): Factor out trailing '\n'
from printed strings and move it to the end of the function.
Use BFD_VMA_FMT for printf format specifier for dynamic tag value.
Use print_vma() to print dynamic tag values.
Jan Kratochvil [Tue, 6 Dec 2011 23:29:47 +0000 (23:29 +0000)]
gdb/gdbserver/
Fix overlapping memcpy.
* mem-break.c (set_raw_breakpoint_at): New variable buf. Use it for
the read_inferior_memory transfer.
(delete_fast_tracepoint_jump): New variable buf. Use it for the
write_inferior_memory transfer.
(set_fast_tracepoint_jump): New variable buf. Use it for the
read_inferior_memory and write_inferior_memory transfers.
(uninsert_fast_tracepoint_jumps_at, reinsert_fast_tracepoint_jumps_at)
(delete_raw_breakpoint, uninsert_raw_breakpoint): New variable buf.
Use it for the write_inferior_memory transfer.
(check_mem_read, check_mem_write): New gdb_asserts for overlapping
buffers.
* mips-tdep.c (mips_pc_is_mips16): Reverse the order of checks
performed to determine whether an address refers to standard
MIPS or MIPS16 code.
(mips16_next_pc): Use mips_pc_is_mips16 instead of
is_mips16_addr.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
Joel Brobecker [Tue, 6 Dec 2011 14:00:37 +0000 (14:00 +0000)]
fix incorrect assumption in gdb.ada/watch_arg
The testcase is assuming that the parameter being watched isn't being
modified. But the way the test program is written, this is not true
at all. So this changes fixes the code to still reference the variable,
but in a way that does not modify its value.
gdb/testsuite:
* gdb.ada/watch_arg/pck.ads, gdb.ada/watch_arg/pck.adb: New files.
* gdb.ada/watch_arg/watch.adb: Adjust code to avoid modification
of parameter X in procedure Foo.
* tc-arm.c (aeabi_set_public_attributes): Correctly set
Tag_ARM_ISA_use and Tag_Thumb_ISA_use.
* gas/arm/attr-any-armv4t.d: New test.
* gas/arm/attr-any-armv4t.s: New file.
* gas/arm/attr-any-thumbv6.d: New test.
* gas/arm/attr-any-thumbv6.s: New file.
projects / deliverable / binutils-gdb.git / log
