* gas/config/tc-arm.c (do_t_mov_cmp): In unified syntax encode movs as
lsls and not adds.
* gas/testsuite/gas/arm/thumb2_it_auto.d: Update for change in movs encoding.
gas/arm/thumb2_it.d: Likewise.
gas/arm/thumb32.d: Likewise.
Joel Brobecker [Fri, 28 May 2010 01:32:08 +0000 (01:32 +0000)]
Cache the TSD type in inferior-data (performance).
This is something I noticed while looking at ada_find_any_type.
Use of that function is expensive, since it causes a global lookup.
Reviewing some of the uses, I found that we were calling it to get
a specific type everytime we print a tagged type (the equivalent of
classes in C++); and not only that, we did it 4 times [1]!
Since the type in question (ada__tags__type_specific_data) is guarantied
to remain the same througout the entire life of the inferior, the solution
was to cache that type in inferior private data. This patch creates
an ada-land private-data area, and uses it to store that type after
the first time we look it up.
[1]: The problem is mitigated in AdaCore's tree because we use an Ada
symbol cache which we are thinking of contributing to the FSF tree.
But that's still pretty bad, regardless.
2010-05-27 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_inferior_data): New struct.
(ada_inferior_data): New static global.
(ada_inferior_data_cleanup, get_ada_inferior_data, ada_inferior_exit)
(ada_get_tsd_type): New functions.
(ada_tag_name_2): Use ada_get_tsd_type instead of ada_find_any_type
to look the tsd type up.
(_initialize_ada_language): Attach ada_inferior_exit to inferior_exit
event. Set ada_inferior_data.
Tom Tromey [Thu, 27 May 2010 19:06:12 +0000 (19:06 +0000)]
* arm-tdep.c (push_stack_item): 'contents' now const.
(arm_push_dummy_call): Make 'val' const. Use value_contents, not
value_contents_writeable. Introduce new temporary.
Joel Brobecker [Thu, 27 May 2010 17:37:45 +0000 (17:37 +0000)]
Replace call to value_contents_raw by call to value_contents.
This is something that Tom spotted. It shouldn't make much of a difference
in practice with the current code, but Tom is planning on making some
changes (bitwise optimized-out tracking) in value_contents...
2010-05-27 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ensure_lval): Replace call to value_contents_raw
by call to value_contents.
Tristan Gingold [Thu, 27 May 2010 13:43:44 +0000 (13:43 +0000)]
2010-05-27 Tristan Gingold <gingold@adacore.com>
* vms-misc.c: Define __NEW_STARLET. Remove trailing spaces.
(VMS_TIME_FACTOR, VMS_TIME_OFFSET): New macros.
(vms_time_to_time_t): Use them instead of local const.
(vms_time_t_to_vms_time): New function.
(vms_get_time): Likewise.
(vms_raw_get_time): Likewise.
* vms.h (vms_time_t_to_vms_time): New declaration.
(vms_get_time): Likewise.
(vms_raw_get_time): Likewise.
Nick Clifton [Thu, 27 May 2010 10:40:36 +0000 (10:40 +0000)]
* config/tc-arm.c (encode_thumb2_ldmstm): Make warning about
writeback when base register is in register list an error, and
correct check.
(do_t_ldmstm): Change warnings.
* gas/arm/thumb2_ldmstm.d: Add new testcases.
* gas/arm/thumb2_ldmstm.s: Likeiwse.
* gas/arm/thumb2_ldmstm_bad.d: Add testcases to check for
UNPREDICTABLE ldm/stm.
* gas/arm/thumb2_ldmstm_bad.l: Likewise.
* gas/arm/thumb2_ldmstm_bad.s: Likewise.
Doug Evans [Thu, 27 May 2010 03:40:45 +0000 (03:40 +0000)]
Allow python to find its files if moved from original location.
* acinclude.m4 (GDB_AC_DEFINE_RELOCATABLE): New function.
(GDB_AC_WITH_DIR): Call it.
* configure.ac: Define WITH_PYTHON_PATH if we can find the
python installation directory.
* config.in: Regenerate.
* configure: Regenerate.
* defs.h (python_libdir): Declare.
* main.c (python_libdir): Define.
(captured_main): Initialize python_libdir.
* python/python.c (_initialize_python): #ifdef WITH_PYTHON_PATH,
call Py_SetProgramName to make sure python can find its libraries
and modules.
Ozkan Sezer [Wed, 26 May 2010 22:40:24 +0000 (22:40 +0000)]
2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
gdb/
* ser-tcp.c (net_open): Check error return from socket() call by its
equality to -1 not by it being negative.
(net_close): Likewise.
gdb/gdbserver/
* gdbreplay.c (remote_open): Check error return from socket() call by
its equality to -1 not by it being negative.
* remote-utils.c (remote_open): Likewise.
sim/arm/
* communicate.c (MYread_char): Check error return from accept() call
by its equality to -1 not by it being negative.
(MYread_charwait): Likewise.
* main.c (main): Likewise for both socket() and accept() calls.
sim/common/
* dv-sockser.c (dv_sockser_init): Check error return from socket()
call by its equality to -1 not by it being negative.
(connected_p): Likewise for accept() call.
sim/cris/
* dv-rv.c (hw_rv_init_socket): Check error return from socket() call
by its equality to -1 not by it being negative.
(hw_rv_write): Likewise.
(hw_rv_handle_incoming): Likewise.
(hw_rv_poll_once): Likewise.
* rvdummy.c (setupsocket): Likewise.
(main): Likewise for accept() call as returned from setupsocket().
sim/m32c/
* main.c (setup_tcp_console): Check error return from socket() call
by its equality to -1 not by it being negative.
Doug Kwan [Wed, 26 May 2010 18:53:46 +0000 (18:53 +0000)]
2010-05-27 Doug Kwan <dougkwan@google.com>
* object.cc (Sized_relobj::do_finalize_local_symbols): Use offset
from start of output section instead of address for a local symbol
in a merged or relaxed section when doing a relocatable link.
gdb/doc/
2010-05-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (General Query Packets) <qSupported>: Describe the
`qRelocInsn' feature.
(Relocate instruction reply packet): New subsection
of `Tracepoint Packets'.
(Tracepoint Packets): Mention that packets QTDP and QTStart
support the qRelocInsn request, and add cross reference to new
subsection.
Tristan Gingold [Wed, 26 May 2010 08:55:22 +0000 (08:55 +0000)]
2010-05-26 Tristan Gingold <gingold@adacore.com>
* vms-alpha.c: Update comments.
(alpha_vms_write_exec): Set lnkflags. Write the GST.
(alpha_vms_link_output_symbol): New function.
(alpha_vms_bfd_final_link): Generate the VMS symbol table.
Set dst_section private field.
(alpha_vms_bfd_final_link): Remove code that set dst_section.
Dave Korn [Wed, 26 May 2010 05:16:31 +0000 (05:16 +0000)]
Merge from gcc:
2010-05-18 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
* configure: Regenerate.
2010-05-07 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
a platform that supports LTO.
* configure: Regenerate.
2010-04-27 Dave Korn <dave.korn.cygwin AT gmail.com>
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
Doug Evans [Tue, 25 May 2010 15:27:17 +0000 (15:27 +0000)]
Add python gdb.GdbError and gdb.string_to_argv.
* NEWS: Document them.
* python/py-cmd.c (cmdpy_function): Don't print a traceback if
the exception is gdb.GdbError. Print a second traceback if there's
an error computing the error message.
(gdbpy_string_to_argv): New function.
* python/py-utils.c (gdbpy_obj_to_string): New function.
(gdbpy_exception_to_string): New function.
* python/python-internal.h (gdbpy_string_to_argv): Declare.
(gdbpy_obj_to_string, gdbpy_exception_to_string): Declare.
(gdbpy_gdberror_exc): Declare.
* python/python.c (gdbpy_gdberror_exc): New global.
(_initialize_python): Initialize gdbpy_gdberror_exc and create
gdb.GdbError.
(GdbMethods): Add string_to_argv.
Nick Clifton [Tue, 25 May 2010 14:12:43 +0000 (14:12 +0000)]
2010-05-21 Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
bfd/
* config.bfd (sh-*-uclinux* | sh[12]-*-uclinux*): Add
bfd_elf32_shl_vec, and FDPIC vectors to targ_selvecs.
* configure.in: Handle FDPIC vectors.
* elf32-sh-relocs.h: Add FDPIC and movi20 relocations.
* elf32-sh.c (DEFAULT_STACK_SIZE): Define.
(SYMBOL_FUNCDESC_LOCAL): Define. Use it instead of
SYMBOL_REFERENCES_LOCAL for function descriptors.
(fdpic_object_p): New.
(sh_reloc_map): Add FDPIC and movi20 relocations.
(sh_elf_info_to_howto, sh_elf_relocate_section): Handle new invalid
range.
(struct elf_sh_plt_info): Add got20 and short_plt. Update all
definitions.
(FDPIC_PLT_ENTRY_SIZE, FDPIC_PLT_LAZY_OFFSET): Define.
(fdpic_sh_plt_entry_be, fdpic_sh_plt_entry_le, fdpic_sh_plts): New.
(FDPIC_SH2A_PLT_ENTRY_SIZE, FDPIC_SH2A_PLT_LAZY_OFFSET): Define.
(fdpic_sh2a_plt_entry_be, fdpic_sh2a_plt_entry_le)
(fdpic_sh2a_short_plt_be, fdpic_sh2a_short_plt_le, fdpic_sh2a_plts):
New.
(get_plt_info): Handle FDPIC.
(MAX_SHORT_PLT): Define.
(get_plt_index, get_plt_offset): Handle short_plt.
(union gotref): New.
(struct elf_sh_link_hash_entry): Add funcdesc, rename tls_type to
got_type and adjust all uses. Add GOT_FUNCDESC.
(struct sh_elf_obj_tdata): Add local_funcdesc. Rename
local_got_tls_type to local_got_type.
(sh_elf_local_got_type): Renamed from sh_elf_local_got_tls_type. All
users changed.
(sh_elf_local_funcdesc): Define.
(struct elf_sh_link_hash_table): Add sfuncdesc, srelfuncdesc, fdpic_p,
and srofixup.
(sh_elf_link_hash_newfunc): Initialize new fields.
(sh_elf_link_hash_table_create): Set fdpic_p.
(sh_elf_omit_section_dynsym): New.
(create_got_section): Create .got.funcdesc, .rela.got.funcdesc
and .rofixup.
(allocate_dynrelocs): Allocate local function descriptors and space
for R_SH_FUNCDESC-related relocations, and for rofixups.
Handle GOT_FUNCDESC. Create fixups. Handle GOT entries which
require function descriptors.
(sh_elf_always_size_sections): Handle PT_GNU_STACK and __stacksize.
(sh_elf_modify_program_headers): New.
(sh_elf_size_dynamic_sections): Allocate function descriptors for
local symbols. Allocate .got.funcdesc contents. Allocate rofixups.
Handle local GOT entries of type GOT_FUNCDESC. Create fixups for
local GOT entries. Ensure that FDPIC libraries always have a PLTGOT
entry in the .dynamic section.
(sh_elf_add_dyn_reloc, sh_elf_got_offset, sh_elf_initialize_funcdesc)
(sh_elf_add_rofixup, sh_elf_osec_to_segment)
(sh_elf_osec_readonly_p, install_movi20_field): New functions.
(sh_elf_relocate_section): Handle new relocations, R_SH_FUNCDESC,
R_SH_GOTFUNCDESC and R_SH_GOTOFFFUNCDESC. Use sh_elf_got_offset
and .got.plt throughout to find _GLOBAL_OFFSET_TABLE_. Add rofixup
read-only section warnings. Handle undefined weak symbols. Generate
fixups for R_SH_DIR32 and GOT entries. Check for cross-segment
relocations and clear EF_SH_PIC. Handle 20-bit relocations.
Always generate R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
(sh_elf_gc_sweep_hook): Handle R_SH_FUNCDESC, R_SH_GOTOFF20,
R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20, and R_SH_GOTOFFFUNCDESC.
Handle 20-bit relocations.
(sh_elf_copy_indirect_symbol): Copy function descriptor reference
counts.
(sh_elf_check_relocs): Handle new relocations. Make symbols
dynamic for FDPIC relocs. Account for rofixups. Error for FDPIC
symbol mismatches. Allocate a GOT for R_SH_DIR32. Allocate fixups
for R_SH_DIR32.
(sh_elf_copy_private_data): Copy PT_GNU_STACK size.
(sh_elf_merge_private_data): Copy initial flags. Do not clobber
non-mach flags. Set EF_SH_PIC for FDPIC. Reject FDPIC mismatches.
(sh_elf_finish_dynamic_symbol): Do not handle got_funcdesc entries
here. Rename sgot to sgotplt and srel to srelplt. Handle short_plt,
FDPIC descriptors, and got20. Create R_SH_FUNCDESC_VALUE for FDPIC.
Use install_movi20_field. Rename srel to srelgot. Always generate
R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
(sh_elf_finish_dynamic_sections): Fill in the GOT pointer in rofixup.
Do not fill in reserved GOT entries for FDPIC. Correct DT_PLTGOT.
Rename sgot to sgotplt. Assert that the right number of rofixups
and dynamic relocations were allocated.
(sh_elf_use_relative_eh_frame, sh_elf_encode_eh_address): New.
(elf_backend_omit_section_dynsym): Use sh_elf_omit_section_dynsym.
(elf_backend_can_make_relative_eh_frame)
(elf_backend_can_make_lsda_relative_eh_frame)
(elf_backend_encode_eh_address): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME, TARGET_LITTLE_SYM)
(TARGET_LITTLE_NAME, elf_backend_modify_program_headers, elf32_bed):
Redefine for FDPIC vector.
* reloc.c: Add SH FDPIC and movi20 relocations.
* targets.c (_bfd_target_vector): Add FDPIC vectors.
* configure, bfd-in2.h, libbfd.h: Regenerated.
binutils/
* readelf.c (get_machine_flags): Handle EF_SH_PIC and EF_SH_FDPIC.
gas/
* config/tc-sh.c (sh_fdpic): New.
(sh_check_fixup): Handle relocations on movi20.
(parse_exp): Do not reject PIC operators here.
(build_Mytes): Check for unhandled PIC operators here. Use
sh_check_fixup for movi20.
(enum options): Add OPTION_FDPIC.
(md_longopts, md_parse_option, md_show_usage): Add --fdpic.
(sh_fix_adjustable, md_apply_fix): Handle FDPIC and movi20 relocations.
(sh_elf_final_processing): Handle --fdpic.
(sh_uclinux_target_format): New.
(sh_parse_name): Handle FDPIC relocation operators.
* config/tc-sh.h (TARGET_FORMAT): Define specially for TE_UCLINUX.
(sh_uclinux_target_format): Declare for TE_UCLINUX.
* configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): Set
em=uclinux.
* doc/c-sh.texi (SH Options): Document --fdpic.
gas/testsuite/
* gas/sh/basic.exp: Run new tests. Handle uClinux like Linux.
* gas/sh/fdpic.d: New file.
* gas/sh/fdpic.s: New file.
* gas/sh/reg-prefix.d: Force big-endian.
* gas/sh/sh2a-pic.d: New file.
* gas/sh/sh2a-pic.s: New file.
* lib/gas-defs.exp (is_elf_format): Include sh*-*-uclinux*.
ld/
* Makefile.am (ALL_EMULATIONS): Add eshelf_fd.o and eshlelf_fd.o.
(eshelf_fd.c, eshlelf_fd.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-uclinux*): Add shelf_fd and shlelf_fd
emulations.
* emulparams/shelf_fd.sh: New file.
* emulparams/shlelf_fd.sh: New file.
* emulparams/shlelf_linux.sh: Update comment.
ld/testsuite/
* ld-sh/sh.exp: Handle uClinux like Linux.
* lib/ld-lib.exp (is_elf_format): Include sh*-*-uclinux*.
* ld-sh/fdpic-funcdesc-shared.d: New file.
* ld-sh/fdpic-funcdesc-shared.s: New file.
* ld-sh/fdpic-funcdesc-static.d: New file.
* ld-sh/fdpic-funcdesc-static.s: New file.
* ld-sh/fdpic-gotfuncdesc-shared.d: New file.
* ld-sh/fdpic-gotfuncdesc-shared.s: New file.
* ld-sh/fdpic-gotfuncdesc-static.d: New file.
* ld-sh/fdpic-gotfuncdesc-static.s: New file.
* ld-sh/fdpic-gotfuncdesci20-shared.d: New file.
* ld-sh/fdpic-gotfuncdesci20-shared.s: New file.
* ld-sh/fdpic-gotfuncdesci20-static.d: New file.
* ld-sh/fdpic-gotfuncdesci20-static.s: New file.
* ld-sh/fdpic-goti20-shared.d: New file.
* ld-sh/fdpic-goti20-shared.s: New file.
* ld-sh/fdpic-goti20-static.d: New file.
* ld-sh/fdpic-goti20-static.s: New file.
* ld-sh/fdpic-gotofffuncdesc-shared.d: New file.
* ld-sh/fdpic-gotofffuncdesc-shared.s: New file.
* ld-sh/fdpic-gotofffuncdesc-static.d: New file.
* ld-sh/fdpic-gotofffuncdesc-static.s: New file.
* ld-sh/fdpic-gotofffuncdesci20-shared.d: New file.
* ld-sh/fdpic-gotofffuncdesci20-shared.s: New file.
* ld-sh/fdpic-gotofffuncdesci20-static.d: New file.
* ld-sh/fdpic-gotofffuncdesci20-static.s: New file.
* ld-sh/fdpic-gotoffi20-shared.d: New file.
* ld-sh/fdpic-gotoffi20-shared.s: New file.
* ld-sh/fdpic-gotoffi20-static.d: New file.
* ld-sh/fdpic-gotoffi20-static.s: New file.
* ld-sh/fdpic-plt-be.d: New file.
* ld-sh/fdpic-plt-le.d: New file.
* ld-sh/fdpic-plt.s: New file.
* ld-sh/fdpic-plti20-be.d: New file.
* ld-sh/fdpic-plti20-le.d: New file.
* ld-sh/fdpic-stack-default.d: New file.
* ld-sh/fdpic-stack-size.d: New file.
* ld-sh/fdpic-stack.s: New file.
Tristan Gingold [Tue, 25 May 2010 12:41:16 +0000 (12:41 +0000)]
2010-05-25 Tristan Gingold <gingold@adacore.com>
* vms-alpha.c (struct vms_symbol_entry): Field section is
now an asection pointer. Ditto for code_section.
(_bfd_vms_slurp_egsd): Adjust for above change.
(vms_get_symbol_info): Ditto.
(alpha_vms_convert_symbol): Ditto. Remove special dwarf2 case.
Remove commented out code.
(alpha_vms_get_synthetic_symtab): Simplify thanks to the above
change.
(alpha_vms_get_sym_value): Remove struct alpha_vms_link_hash_entry
parameter. Simplify the code.
(_bfd_vms_slurp_etir): Adjust for above change.
Nick Clifton [Tue, 25 May 2010 10:14:16 +0000 (10:14 +0000)]
PR ld/11624
* archive.c (_bfd_calloc_wrapper): New function.
(_bfd_add_bfd_to_archive_cache): Use it.
* configure.in: Add alpha*-*-*vms* to list of natives.
* configure: Regenerate.
* vms-misc.c: Define globalref if necessary.
(vms_convert_to_var_unix_filename): Rename to
_bfd_vms_convert_to_var_unix_filename and export.
* vms.h: Add prototype for _bfd_vms_convert_to_var_unix_filename.
* vms-alpha.c (vms_close_and_cleanup): Update invocation of
vms_convert_to_var_unix_filename.
Kai Tietz [Tue, 25 May 2010 10:03:01 +0000 (10:03 +0000)]
2010-05-25 Kai Tietz <kai.tietz@onevision.com>
* emultempl/pep.em (gld_${EMULATION_NAME}_before_parse): Enable by
default auto_import.
(gld${EMULATION_NAME}_handle_option): Warn about v1.
(pep_find_data_imports): Remove superflous warnings about
auto-import.
(gld_${EMULATION_NAME}_get_script): Don't merge for auto-import
and active pseudo-relocation-v2 rdata into data section.
Tristan Gingold [Mon, 24 May 2010 10:41:52 +0000 (10:41 +0000)]
2010-05-24 Tristan Gingold <gingold@adacore.com>
* vms-alpha.c (struct vms_private_data_struct): Add section_max
field.
(_bfd_vms_slurp_egsd): Put PSC into the sections array.
(vms_new_section_hook): Do not put section in the sections
array.
Doug Kwan [Sun, 23 May 2010 07:43:39 +0000 (07:43 +0000)]
2010-05-23 Doug Kwan <dougkwan@google.com>
* arm.cc (Arm_input_section::do_output_offset): Use convert_types
instead of a cast.
(Target_arm::apply_cortex_a8_workaround): Rewrite a conditional branch
with a direct branch, not a conditional branch, to a stub.
* merge.cc (Output_merge_base::record_input_section): New method
defintion.
(Output_merge_data::do_add_input_section): Record input section if
keeps-input-sections flag is set.
(Output_merge_string::do_add_input_section): Ditto.
* merge.h (Output_merge_base::Output_merge_base): Initialize new data
members KEEPS_INPUT_SECTIONS_, FIRST_RELOBJ_, FIRST_SHNDX_ and
INPUT_SECTIONS_.
(Output_merge_base::keeps_input_sections,
Output_merge_base::set_keeps_input_sections,
Output_merge_base::first_relobj, Output_merge_base::first_shndx): New
method definitions.
(Output_merge_base::Input_sections): New type declaration.
(Output_merge_base::input_sections_begin,
Output_merge_base::input_sections_end,
Output_merge_base::do_set_keeps_input_sections): New method definitions.
(Output_merge_base::bool keeps_input_sections_,
Output_merge_base::first_relobj_, Output_merge_base::first_shndx_,
Output_merge_base::input_sections_): New data members.
(Output_merge_data::do_set_keeps_input_sections): New method
defintion.
(Output_merge_string::do_set_keeps_input_sections): Ditto.
* output.cc (Output_section::Input_section::relobj): Move method
defintion from class declaration to here and handle merge sections.
(Output_section::Input_section::shndx): Ditto.
(Output_section::Output_section): Remove initializations of removed
data members and initialize new data member LOOKUP_MAPS_.
(Output_section::add_input_section): Set keeps-input-sections flag
for a newly created merge output section as appropriate. Adjust code
to use Output_section_lookup_maps class.
(Output_section::add_relaxed_input_section): Adjst code for lookup
maps code refactoring.
(Output_section::add_merge_input_section): Add a new parameter
KEEPS_INPUT_SECTION. Adjust code to use Output_section_lookup_maps
class. If adding input section to a newly created merge output
section fails, remove the new merge section.
(Output_section::convert_input_sections_in_list_to_relaxed_input_sections):
Adjust code for use of the Output_section_lookup_maps class.
(Output_section::find_merge_section): Ditto.
(Output_section::build_lookup_maps): New method defintion.
(Output_section::find_relaxed_input_section): Adjust code to use
Output_section_lookup_maps class.
(Output_section::get_input_sections): Export merge sections. Adjust
code to use Output_section_lookup_maps class.
(Output_section:::add_script_input_section): Adjust code to use
Output_section_lookup_maps class. Update lookup maps for merge
sections also.
(Output_section::discard_states): Use Output_section_lookup_maps.
(Output_section::restore_states): Same.
* output.h (Merge_section_properties): Move class defintion out of
Output_section.
(Output_section_lookup_maps): New class.
(Output_section::Input_section::is_merge_section): New method
defintion.
(Output_section::Input_section::relobj): Move defintion out of class
defintion. Declare method only.
(Output_section::Input_section::shndx): Ditto.
(Output_section::Input_section::output_merge_base): New method defintion.
(Output_section::Input_section::u2_.pomb): New union field.
(Output_section::Merge_section_by_properties_map,
Output_section::Output_section_data_by_input_section_map,
Output_section::Ouptut_relaxed_input_section_by_input_section_map):
Remove types.
(Output_section::add_merge_input_section): Add new parameter
KEEPS_INPUT_SECTIONS.
(Output_section::build_lookup_maps): New method declaration.
(Output_section::merge_section_map_,
Output_section::merge_section_by_properties_map_,
Output_section::relaxed_input_section_map_,
Output_section::is_relaxed_input_section_map_valid_): Remove data
members.
(Output_section::lookup_maps_): New data member.
Tom Tromey [Fri, 21 May 2010 21:00:27 +0000 (21:00 +0000)]
gdb
* eval.c (evaluate_subexp_standard) <BINOP_SUBSCRIPT>: Call
evaluate_subexp, not evaluate_subexp_with_coercion.
gdb/testsuite
* gdb.dwarf2/pieces.exp (pieces_test_f2): New proc.
Call it.
Tom Tromey [Fri, 21 May 2010 20:39:50 +0000 (20:39 +0000)]
gdb
* dwarf2loc.c (read_pieced_value): Work properly when 'v' has an
offset.
(write_pieced_value): Likewise.
gdb/testsuite
* gdb.dwarf2.pieces.exp: New file.
* gdb.dwarf2.pieces.S: New file.
* gdb.dwarf2.pieces.c: New file.
Joel Brobecker [Thu, 20 May 2010 19:18:58 +0000 (19:18 +0000)]
lib/gdb.exp: New gdb_test_no_output function.
This new testsuite routine allows us to test commands that are not
expected to generate any output.
2010-05-20 Pedro Alves <pedro@codesourcery.com>
Joel Brobecker <brobecker@adacore.com>
* lib/gdb.exp (gdb_test_no_output): New function.
* lib/gdb.ada/arrayidx.exp: Use gdb_test_no_output instead of gdb_test
when testing commands that should produce no output.