s390: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-s390.c (allocate_dynrelocs): Discard dynamic
relocations if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(elf_s390_relocate_section): Don't generate dynamic relocation
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
* elf64-s390.c (allocate_dynrelocs): Discard dynamic
relocations if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(elf_s390_relocate_section): Don't generate dynamic relocation
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.

nios2: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-nios2.c (nios2_elf32_relocate_section): Don't generate
dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(allocate_dynrelocs): Discard dynamic relocations if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.

microblaze: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-microblaze.c (microblaze_elf_relocate_section): Don't
generate dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is
true.
(allocate_dynrelocs): Discard dynamic relocations if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.

m68k: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-m68k.c (elf_m68k_check_relocs): Don't allocate dynamic
relocations if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(elf_m68k_adjust_dynamic_symbol): Don't make symbol dynamic if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(elf_m68k_relocate_section): Don't generate dynamic relocation
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.

hppa: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-hppa.c (ensure_undef_dynamic): Don't make undefined
symbol dynamic if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(allocate_dynrelocs): Discard dynamic relocations if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(elf32_hppa_relocate_section): Don't generate dynamic
relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.

ia64: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elfnn-ia64.c (elfNN_ia64_check_relocs): Don't allocate
dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(allocate_fptr): Don't allocate function pointer if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(allocate_dynrel_entries): Don't allocate dynamic relocation
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(set_got_entry): Don't set GOT entry if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(set_pltoff_entry): Don't set PLTOFF entry if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(elfNN_ia64_relocate_section): Don't install dynamic relocation
UNDEFWEAK_NO_DYNAMIC_RELOC is true.

mips: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elfxx-mips.c (mips_elf_calculate_relocation): Don't generate
dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(allocate_dynrelocs): Don't allocate dynamic relocations if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.

arm: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-arm.c (elf32_arm_final_link_relocate): Don't generate
dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(allocate_dynrelocs_for_symbol): Discard dynamic relocations
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.

tile: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elf32-tilepro.c (allocate_dynrelocs): Discard dynamic
relocations if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(tilepro_elf_relocate_section): Don't generate dynamic
relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
* elfxx-tilegx.c (allocate_dynrelocs): Discard dynamic
relocations if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(tilegx_elf_relocate_section): Don't generate dynamic
relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.

aarch64: Check UNDEFWEAK_NO_DYNAMIC_RELOC

Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero.  FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.

PR ld/22269
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Don't
generate dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is
true.
(elfNN_aarch64_allocate_dynrelocs): Discard dynamic relocations
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.

Move UNDEFWEAK_NO_DYNAMIC_RELOC to elf-bfd.h

Move UNDEFWEAK_NO_DYNAMIC_RELOC to elf-bfd.h so that it can be used by
other ELF linker backends.

* elf32-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Moved to ...
* elf-bfd.h (UNDEFWEAK_NO_DYNAMIC_RELOC): Here.
* elf64-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Removed.

Fix build failure in linux-osdata.c

Commit

  Use std::vector in linux_xfer_osdata_processgroups
  b129dcac882da87767cb863ad8b2572f90e9e5bc

broke the build with older gcc (at least 4.7 and 4.8):

In file included from /usr/include/c++/4.7/algorithm:63:0,
                 from /home/emaisin/src/binutils-gdb/gdb/nat/linux-osdata.c:40:
/usr/include/c++/4.7/bits/stl_algo.h: In instantiation of ‘_RandomAccessIterator std::__unguarded_partition(_RandomAccessIterator, _RandomAccessIterator, const _Tp&) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<pid_pgid_entry*, std::vector<pid_pgid_entry> >; _Tp = pid_pgid_entry]’:
/usr/include/c++/4.7/bits/stl_algo.h:2315:70:   required from ‘_RandomAccessIterator std::__unguarded_partition_pivot(_RandomAccessIterator, _RandomAccessIterator) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<pid_pgid_entry*, std::vector<pid_pgid_entry> >]’
/usr/include/c++/4.7/bits/stl_algo.h:2347:54:   required from ‘void std::__introsort_loop(_RandomAccessIterator, _RandomAccessIterator, _Size) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<pid_pgid_entry*, std::vector<pid_pgid_entry> >; _Size = long int]’
/usr/include/c++/4.7/bits/stl_algo.h:5483:4:   required from ‘void std::sort(_RAIter, _RAIter) [with _RAIter = __gnu_cxx::__normal_iterator<pid_pgid_entry*, std::vector<pid_pgid_entry> >]’
/home/emaisin/src/binutils-gdb/gdb/nat/linux-osdata.c:480:57:   required from here
/usr/include/c++/4.7/bits/stl_algo.h:2277:4: error: passing ‘const pid_pgid_entry’ as ‘this’ argument of ‘bool pid_pgid_entry::operator<(const pid_pgid_entry&)’ discards qualifiers [-fpermissive]

Making the operator< method const fixes it.

gdb/ChangeLog:

* nat/linux-osdata.c (struct pid_pgid_entry) <operator<>: Make
const.

gdbserver: use std::list for all_threads

Remove the usage of inferior_list for the all_threads list in
gdbserver.  The entry field in thread_info is removed, and replaced by a
simple ptid field.

I added some functions to iterate (for_each_thread) and find threads
(find_thread).  However, changing all the users of find_inferior & co to
use these new functions would have made the patch way too big.  So I
opted instead to make find_inferior & co some shims, so that the
existing code only needs to be updated minimally.  We can then update
the existing code to use the new functions incrementally (I've started
to do the work, but I'll post it afterwards, see [1] if you want a peek).

This patch has been built-tested on all relevant platforms, except
lynx.  I also regtested using the native-gdbserver and
native-extended-gdbserver boards on x86.

[1] https://github.com/simark/binutils-gdb/commits/kill-inferior-list-entry

gdb/gdbserver/ChangeLog:

* inferiors.h: (struct inferior_list): Remove.
(struct inferior_list_entry); Remove.
(add_inferior_to_list, clear_inferior_list, one_inferior_p,
A_I_NEXT, ALL_INFERIORS_TYPE, ALL_INFERIORS, remove_inferior,
get_first_inferior): Remove.
(for_each_inferior, for_each_inferior_with_data, find_inferior,
find_inferior_id, find_inferior_in_random): Change signature.
* inferiors.c (all_threads): Change type to
std::list<thread_info *>.
(get_thread): Remove macro.
(find_inferior, find_inferior_id): Change signature, implement
using find_thread.
(find_inferior_in_random): Change signature, implement using
find_thread_in_random.
(for_each_inferior, for_each_inferior_with_data): Change
signature, implement using for_each_thread.
(add_inferior_to_list, remove_inferior): Remove.
(add_thread, get_first_thread, thread_of_pid,
find_any_thread_of_pid, free_one_thread, remove_thread): Update.
(get_first_inferior, one_inferior_p, clear_inferior_list):
Remove.
(clear_inferiors, get_thread_process): Update.
* gdbthread.h: Include <list>.
(struct thread_info) <entry>: Remove field.
<id>: New field.
(all_threads): Change type to std::list<thread_info *>.
(get_first_inferior): Add doc.
(find_thread, for_each_thread, find_thread_in_random): New
functions.
(current_ptid, pid_of, ptid_of, lwpid_of): Update.
* linux-arm-low.c (update_registers_callback): Update.
* linux-low.c (second_thread_of_pid_p): Update.
(kill_one_lwp_callback, linux_detach_lwp_callback,
delete_lwp_callback, status_pending_p_callback, same_lwp,
find_lwp_pid, num_lwps, iterate_over_lwps_filter,
iterate_over_lwps, not_stopped_callback,
resume_stopped_resumed_lwps, count_events_callback,
select_singlestep_lwp_callback, select_event_lwp_callback,
unsuspend_one_lwp, linux_wait_1, send_sigstop_callback,
suspend_and_send_sigstop_callback, wait_for_sigstop,
stuck_in_jump_pad_callback, move_out_of_jump_pad_callback,
lwp_running, linux_set_resume_request, resume_status_pending_p,
need_step_over_p, start_step_over, linux_resume_one_thread,
proceed_one_lwp, unsuspend_and_proceed_one_lwp,
reset_lwp_ptrace_options_callback): Update.
* linux-mips-low.c (update_watch_registers_callback): Update.
* regcache.c (regcache_invalidate_one, regcache_invalidate):
Update.
(free_register_cache_thread_one): Remove.
(regcache_release): Update.
* server.c (handle_btrace_enable_bts, handle_btrace_enable_pt,
handle_qxfer_threads_worker): Update.
(handle_query): Update, use list iterator.
(visit_actioned_threads, handle_pending_status,
queue_stop_reply_callback, gdb_wants_all_threads_stopped,
clear_pending_status_callback, set_pending_status_callback,
find_status_pending_thread_callback, handle_status,
process_serial_event): Update.
* target.c (thread_search_callback): Update.
* thread-db.c (thread_db_get_tls_address): Update.
* tracepoint.c (tracepoint_finished_step, tracepoint_was_hit):
Update.
* win32-i386-low.c (update_debug_registers_callback): Update.
* win32-low.c (delete_thread_info, child_delete_thread,
continue_one_thread, suspend_one_thread,
get_child_debug_event): Adjust.

gdbserver: Use std::list for all_processes

Remove the usage of inferior_list for the all_processes list in
gdbserver, replace it with an std::list. The entry field in process_info
is removed, and replaced by a simple pid field.

The pid_of macro, used for both processes and threads, is replaced with
separate functions.  For completeness, I changed ptid_of and lwpid_of to
functions as well.

gdb/gdbserver/ChangeLog:

* gdbthread.h (ptid_of, pid_of, lwpid_of): New functions.
* inferiors.h: Include <list>.
(struct process_info) <entry>: Remove field.
<pid>: New field.
(pid_of): Change macro to function.
(ptid_of, lwpid_of): Remove macro.
(all_processes): Change type to std::list<process_info *>.
(ALL_PROCESSES): Remove macro.
(for_each_process, find_process): New function.
* inferiors.c (all_processes): Change type to
std::list<process_info *>.
(find_thread_process): Adjust.
(add_process): Likewise.
(remove_process): Likewise.
(find_process_pid): Likewise.
(get_first_process): Likewise.
(started_inferior_callback): Remove.
(have_started_inferiors_p): Adjust.
(attached_inferior_callback): Remove.
(have_attached_inferiors_p): Adjust.
* linux-low.c (check_zombie_leaders): Likewise.
* linux-x86-low.c (x86_arch_setup_process_callback): Remove.
(x86_linux_update_xmltarget): Adjust.
* server.c (handle_query): Likewise.
(gdb_reattached_process): Remove.
(handle_status): Adjust.
(kill_inferior_callback): Likewise.
(detach_or_kill_inferior): Remove.
(print_started_pid): Likewise.
(print_attached_pid): Likewise.
(detach_or_kill_for_exit): Update.
(process_serial_event): Likewise.
* linux-arm-low.c (arm_new_fork): Likewise.

gdbserver: Use std::list for all_dlls

As a small step towards removing inferior_list/inferior_list_entry, this
patch replaces the usage of inferior_list for the list of dlls by an
std::list.  The dll_info type now uses an std::string for name and has a
simple constructor.

I am able to build gdbserver with mingw on Linux, but I am not able to
test this on a Windows machine (the only platform that uses this code).

gdb/gdbserver/ChangeLog:

* dll.h: Include <list>.
(struct dll_info): Add constructor.
<entry>: Remove field.
(all_dlls): Change type to std::list<dll_info>.
* dll.c: Include <algorithm>.
(get_dll): Remove macro.
(all_dlls): Change type to std::list<dll_info *>.
(free_one_dll): Remove.
(match_dll): Likewise.
(loaded_dll): Adjust.
(unloaded_dll): Adjust to all_dlls type change, use
std::find_if.  Inline code from match_dll.
(clear_dlls): Adjust to all_dlls type change.
* server.c (emit_dll_description): Remove.
(handle_qxfer_libraries): Adjust to all_dlls type change,
integrate emit_dll_description's functionality.

Make to_traceframe_info return a unique_ptr

Since this target method returns an allocated object, return a
unique_ptr.  It allows getting rid a some cleanups here and there.

I had to shuffle the includes around.  First, target.h now needs to
include tracepoint.h, to get the definition of traceframe_info_up.
However, the definition of enum trace_find_type was later in target, so
I had to move it to tracepoint.h, so that the declaration of tfind_1
could know about it.  I then had to remove the include of target.h from
tracepoint.h, which caused a circular dependency (it was probably
included to get enum trace_find_type in the first place anyway).

Regression tested on the buildbot.

gdb/ChangeLog:

* target.h: Include tracepoint.h.
(enum trace_find_type): Move to tracepoint.h.
(struct target_ops) <to_traceframe_info>: Return a unique ptr.
* tracepoint.h: Don't include target.h
(enum trace_find_type): Move from target.h.
(parse_traceframe_info): Return a unique ptr.
* tracepoint.c (current_traceframe_info): Change type to unique
ptr.
(free_traceframe_info): Remove.
(clear_traceframe_info): Don't manually free
current_traceframe_info.
(free_result): Remove.
(parse_traceframe_info): Return a unique ptr.
(get_traceframe_info): Adjust to unique ptr.
* ctf.c (ctf_traceframe_info): Return a unique ptr.
* remote.c (remote_traceframe_info): Return a unique ptr.
* tracefile-tfile.c (tfile_traceframe_info): Return a unique
ptr.
* target-debug.h (target_debug_print_traceframe_info_up): New
macro.
* target-delegates.c: Regenerate.

Use std::vector for traceframe_info::memory

Straightforward change from a VEC to std::vector.  This allows making
the destruction of a traceframe_info trivial.

I added a constructor with parameters to mem_range to be able to
emplace_back directly with the values.  It is necessary to leave a
default constructor there because mem_range is still used in a VEC.

gdb/ChangeLog:

* memrange.h (struct mem_range): Add constructors.
* tracepoint.h (struct traceframe_info) <memory>: Change type to
std::vector<mem_range>.
* tracepoint.c (free_traceframe_info): Don't manually free
vector.
(traceframe_info_start_memory): Adjust to vector change.
(traceframe_available_memory): Likewise.
* tracefile-tfile.c (build_traceframe_info): Likewise.
* ctf.c (ctf_traceframe_info): Likewise.

Use std::vector for traceframe_info::tvars

Straightforward change to get rid of a VEC.  We need to new/delete
traceframe_info instead of malloc/free it.  I found three places that
allocate a traceframe_info (ctf_traceframe_info, tfile_traceframe_info
and parse_traceframe_info) and only one that frees it
(free_traceframe_info).

gdb/ChangeLog:

* tracepoint.h (struct traceframe_info) <tvars>: Change type to
std::vector<int>.
* tracepoint.c (free_traceframe_info): Deallocate with delete.
(traceframe_info_start_tvar): Adjust to vector change.
(parse_traceframe_info): Allocate with new.
* ctf.c (ctf_traceframe_info): Allocate with new, adjust to
vector change.
* tracefile-tfile.c (build_traceframe_info): Adjust to vector
change.
tfile_traceframe_info): Allocate with new.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to vector
change.

Rename traceframe_info variable to current_traceframe_info

... so it doesn't shadow the traceframe_info type.  It think it's a
clearer name anyway.

gdb/ChangeLog:

* tracepoint.c (traceframe_info): Rename to...
(current_traceframe_info): ...this.
(clear_traceframe_info): Adjust.
(get_traceframe_info): Adjust.

Use std::vector in linux_xfer_osdata_processgroups

This simplifies the code quite a bit, by removing the array of PID_T
that's actually an array of pairs of PID_T.

This code is only used to implement "info os procgroups".  I tested by hand
as well as by running gdb.base/info-os.exp for unix, native-gdbserver
and native-extended-gdbserver.

gdb/ChangeLog:

* nat/linux-osdata.c: Include algorithm.
(compare_processes): Remove.
(struct pid_pgid_entry): New struct.
(linux_xfer_osdata_processgroups): Use std::vector instead of
XNEWVEC.

Replace psymbol_allocation_list with std::vector

psymbol_allocation_list is basically a vector implementation.  We can
replace it with an std::vector, now that objfile has been C++-ified.

I sent this to the buildbot, there are a few suspicious failures, but
I don't think they are related to this patch.  For example on powerpc:

new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit

I get the same failures when testing manually on gcc112, without this
patch.

gdb/ChangeLog:

* objfiles.h: Don't include symfile.h.
(struct partial_symbol): Remove forward-declaration.
(struct objfile) <global_psymbols, static_psymbols>: Change type
to std::vector<partial_symbol *>.
* objfiles.c (objfile::objfile): Don't memset those fields.
(objfile::~objfile): Don't free those fields.
* psympriv.h (struct psymbol_allocation_list): Remove
forward-declaration.
(add_psymbol_to_list): Change psymbol_allocation_list parameter
to std::vector.
(start_psymtab_common): Change parameters to std::vector.
* psymtab.c: Include algorithm.
(require_partial_symbols): Call shrink_to_fit.
(find_pc_sect_psymbol): Adjust to vector change.
(match_partial_symbol): Likewise.
(lookup_partial_symbol): Likewise.
(psym_relocate): Likewise.
(dump_psymtab): Likewise.
(recursively_search_psymtabs): Likewise.
(compare_psymbols): Remove.
(sort_pst_symbols): Adjust to vector change.
(start_psymtab_common): Likewise.
(end_psymtab_common): Likewise.
(psymbol_bcache_full): De-constify return value.
(add_psymbol_to_bcache): Likewise.
(extend_psymbol_list): Remove.
(append_psymbol_to_list): Adjust to vector change.
(add_psymbol_to_list): Likewise.
(init_psymbol_list): Likewise.
(maintenance_info_psymtabs): Likewise.
(maintenance_check_psymtabs): Likewise.
* symfile.h (struct psymbol_allocation_list): Remove.
* symfile.c (reread_symbols): Adjust to vector change.
* dbxread.c (start_psymtab): Change type of parameters.
(dbx_symfile_read): Adjust to vector change.
(read_dbx_symtab): Likewise.
(start_psymtab): Change type of parameters.
* dwarf2read.c (dwarf2_build_psymtabs): Adjust to vector change.
(create_partial_symtab): Likewise.
(add_partial_symbol): Likewise.
(write_one_signatured_type): Likewise.
(recursively_write_psymbols): Likewise.
* mdebugread.c (parse_partial_symbols): Likewise.
* xcoffread.c (xcoff_start_psymtab): Change type of parameters.
(scan_xcoff_symtab): Adjust to vector change.
(xcoff_initial_scan): Likewise.

ada: Use std::string in print_dynamic_range_bound

Replace this usage of GROW_VECT with an std::string.  I don't think
there's a reason for this variable to be static, other than it was
cumbersome to manage its lifetime (i.e. use a cleanup) before.

Tested by comparing the gdb.ada/*.exp test results before and after the
patch.

gdb/ChangeLog:

* ada-typeprint.c (print_dynamic_range_bound): Use std::string.

Automatic date update in version.in

Skip a few tests on targets that can't use the "run" commmand.

These tests want to use raw "run", so skip them on targets that can't
do that.

Also adds a small utility procedure that clearly conveys intent instead of
explicitly checking use_gdb_stub in the testcases.

This makes sure these testcases continue to be skipped with
--target_board=native-gdbserver once that board stops setting
is_remote.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* lib/gdb.exp (target_can_use_run_cmd): New procedure.
* gdb.base/annota1.exp: Use it instead of is_remote.
* gdb.base/annota3.exp: Use it instead of is_remote.
* gdb.cp/annota2.exp: Use it instead of is_remote.
* gdb.cp/annota3.exp: Use it instead of is_remote.
* gdb.multi/bkpt-multi-exec.exp: Use it instead of is_remote.

Fix gdb.base/testenv.exp against --target_board=native-extended-gdbserver

Currently we get:

  Running ..../src/gdb/testsuite/gdb.base/testenv.exp ...
  FAIL: gdb.base/testenv.exp: test no TEST_GDB var
  FAIL: gdb.base/testenv.exp: test with one TEST_GDB var
  FAIL: gdb.base/testenv.exp: test with two TEST_GDB var
  FAIL: gdb.base/testenv.exp: test with one TEST_GDB var, after unset
  FAIL: gdb.base/testenv.exp: test with TEST_GDB_GLOBAL
  FAIL: gdb.base/testenv.exp: test with TEST_GDB_GLOBAL unset

The problem is that the testcase relies on stdio.  While we could fix
this for gdbserver by read output from inferior_spawn_id, a better fix
it to not rely on stdio at all.  That's what this commit does.
Instead, it reads variables off of the inferior to extract the
necessary information.

Along the way, most of the .exp file is reimplemented/cleaned up using
more modern mechanisms.  E.g., with_test_prefix, proc_with_prefix,
save_vars, etc.  Also, a missing check for "is_remote host" is added.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/testenv.exp: Check use_gdb_stub instead of is_remote.
(test_num_test_vars, run_and_count_vars, find_env)
(test_set_unset_env, test_inherit_env_var): New procedures.
(top level): Use them.

Don't run gdb.gdb/ selftests if use_gdb_stub is true

If we make the native-gdbserver board be !is_remote, then the few
tests that use the selftest-support.exp routines to debug gdb itself
start running, and fail, with something like:

  Running ..../src/gdb/testsuite/gdb.gdb/selftest.exp ...
  ERROR: tcl error sourcing ..../src/gdb/testsuite/gdb.gdb/selftest.exp.
  ERROR: gdbserver does not support run [....] without extended-remote
      while executing
  "error "gdbserver does not support $command without extended-remote""
      (procedure "gdb_test_multiple" line 25)
      invoked from within
  "gdb_test_multiple "run $INTERNAL_GDBFLAGS" "$description" {
  -re "Starting program.*Breakpoint \[0-9\]+,.*$function \\(\\).* at .*main.c:.*$gdb..."
      (procedure "selftest_setup" line 45)

This commit makes sure those tests continue to be skipped.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* lib/selftest-support.exp (selftest_setup): Extend comments, and
also skip on stub-like targets.

Make gdb.base/find-unmapped.exp pass on remote targets

Currently, with --target_board=native-extended-gdbserver, we get:

  Running .../src/gdb/testsuite/gdb.base/find-unmapped.exp ...
  FAIL: gdb.base/find-unmapped.exp: find global_var_0, global_var_2, 0xff
  FAIL: gdb.base/find-unmapped.exp: find global_var_1, global_var_2, 0xff
  FAIL: gdb.base/find-unmapped.exp: find global_var_2, (global_var_2 + 16), 0xff

This commit makes the test pass there, and also enables in on
--target_board=native-gdbserver, and other remote targets.

I've filed PR gdb/22293 to track the missing-warning problem.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

PR gdb/22293
* gdb.base/find-unmapped.exp: Don't skip if is_remote target.
(top level): Move some tests to ...
(test_not_found): ... this new procedure.
(top level): Call it.

Simplify tic6x and s390x expedite registers

Nowadays, we have six tic6x expedite registers, which are duplicated.

tic6x-c64xp-expedite = A15,PC
tic6x-c64x-expedite = A15,PC
tic6x-c62x-expedite = A15,PC
tic6x-c64xp-linux-expedite = A15,PC
tic6x-c64x-linux-expedite = A15,PC
tic6x-c62x-linux-expedite = A15,PC

in features/Makefile, we have

   echo "expedite:$(if $($*-expedite),$($*-expedite),$($(firstword $(subst -, ,$(notdir $*)))-expedite))" \
        >> $(outdir)/$*.tmp

which means for a given bar/foo-baz.xml, we'll look for either
bar/foo-baz-expedite or foo-expedite.  We can define only one generic
expedite register for all different ti6cx and s390x target descriptions.
Actually, we've done that for x86 target descriptions.

Re-run 'make GDB=/path/build/gdb all' to regenerate regformats/*.dat files,
and they are not changed.

gdb:

2017-10-13  Yao Qi  <yao.qi@linaro.org>

* features/Makefile: Remove tic6x-*-expedite, add tic6x-expedite.
Remove s390x-*-expedite, add s390x-expedite.

Regenerate features/s390-gs-linux64.c and features/s390x-gs-linux64.c

gdb:

2017-10-13  Yao Qi  <yao.qi@linaro.org>

* features/s390-gs-linux64.c: Regenerated.
* features/s390x-gs-linux64.c: Regenerated.

PR22263 testcase

A number of targets need dynamic relocs in PIEs for reasons other than
relocating thread variables.  The PR is about text relocations, and,
reading between the lines, unnecessary dynamic tprel relocations.
Change the test to check for those conditions rather than no dynamic
relocations

PR ld/22263
* testsuite/ld-elf/tls.exp: Link with -z text.
* testsuite/ld-elf/pr22263-1.rd: Test for tprel relocs.

Change objfile to use new/delete

This changes objfiles to use new and delete rather than xmalloc and
free.  Simon noticed that it uses a non-POD and so shouldn't be
allocated with XCNEW; and I wanted to be able to use another non-POD as
a member; this patch is the result.

Regression tested by the buildbot.

2017-10-13  Tom Tromey  <tom@tromey.com>

* compile/compile-object-run.c (do_module_cleanup): Use delete.
* solib.c (update_solib_list, reload_shared_libraries_1): Use
delete.
* symfile.c (symbol_file_add_with_addrs): Use new.
(symbol_file_add_separate): Update comment.
(syms_from_objfile_1, remove_symbol_file_command): Use delete.
* jit.c (jit_object_close_impl): Use new.
(jit_unregister_code): Use delete.
* objfiles.c (objfile::objfile): Rename from allocate_objfile.
(~objfile): Rename from free_objfile.
(free_objfile_separate_debug, do_free_objfile_cleanup)
(free_all_objfiles, objfile_purge_solibs): Use delete.
* objfiles.h (struct objfile): Add constructor and destructor.
Use DISABLE_COPY_AND_ASSIGN.  Add initializers to data members.
(allocate_objfile, free_objfile): Don't declare.
(struct objstats): Add initializers.

Fix gdb.base/term.exp on non-"target native" boards

With --target_board=native-extended-gdbserver, we get:

  Running .../src/gdb/testsuite/gdb.base/term.exp ...
  FAIL: gdb.base/term.exp: info terminal at breakpoint

  (gdb) info terminal
  No saved terminal information.

Fix it by running the test everywhere, and expecting different output
on non-native targets.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/term.exp: Don't skip if is_remote target.  Instead,
expect different "info terminal" output if testing with a
non-native target.

Remove is_remote kfail from gdb.python/py-evthreads.exp

This testcase works fine with gdbserver nowadays.  So remove the
kfail.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>
    Simon Marchi  <simon.marchi@polymtl.ca>

PR python/12966
* gdb.python/py-evthreads.exp: Remove is_remote target kfail.

Fix gdb.python/py-evthreads.exp with --target_board=native-extended-gdbserver

Fixes:
  Running ..../src/gdb/testsuite/gdb.python/py-evthreads.exp ...
  FAIL: gdb.python/py-evthreads.exp: run to breakpoint 1
  FAIL: gdb.python/py-evthreads.exp: reached breakpoint 2
  FAIL: gdb.python/py-evthreads.exp: thread 2
  FAIL: gdb.python/py-evthreads.exp: reached breakpoint 3
  FAIL: gdb.python/py-evthreads.exp: thread 3
  FAIL: gdb.python/py-evthreads.exp: continue thread 1
  [... cascading time outs ...]

By following the usual pattern that makes sure that non-stop is enabled
before connecting to gdbserver.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.python/py-evthreads.exp: Start GDB with "set non-stop on"
already.

kfail gdb.python/py-evsignal.exp on RSP targets properly

Fixes, with --target_board=native-extended-gdbserver:

   Running ..../src/gdb/testsuite/gdb.python/py-evsignal.exp ...
   FAIL: gdb.python/py-evsignal.exp: signal Thread 3

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.python/py-evsignal.exp: Check gdb_protocol instead of
is_remote.

Skip gdb.threads/thread_events.exp on RSP targets properly

Fixes, with --target_board=native-extended-gdbserver:

  Running ..../src/gdb/testsuite/gdb.threads/thread_events.exp ...
  FAIL: gdb.threads/thread_events.exp: continue to after_join_func with messages enabled (saw 0, expected 1)

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.threads/thread_events.exp: Check gdb_protocol instead of
is_remote.

Tweak gdb.base/corefile.exp is_remote check

1. Otherwise, when we make native-gdbserver board no longer is_remote,
   we get:

  Running .../src/gdb/testsuite/gdb.base/corefile.exp ...
  ERROR: tcl error sourcing .../src/gdb/testsuite/gdb.base/corefile.exp.
  ERROR: gdbserver does not support attach 9327 without extended-remote
      while executing
  "error "gdbserver does not support $command without extended-remote""

  That's fixed by using can_spawn_for_attach instead.

2. The gdb_protocol check fixes this current problem with
   --target_board=extended-remote-gdbserver:

     Running .../src/gdb/testsuite/gdb.base/corefile.exp ...
     FAIL: gdb.base/corefile.exp: run: with core
     FAIL: gdb.base/corefile.exp: run: core file is cleared
     FAIL: gdb.base/corefile.exp: attach: with core
     FAIL: gdb.base/corefile.exp: attach: core file is cleared

   gdb.log:
     (...)
     attach 10859
     Don't know how to attach.  Try "help target".
     (...)

The fix for #2 alone would fix #1 too, but can_spawn_for_attach
expresses the requirement directly, so I still left it there.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/corefile.exp (corefile_test_run): Skip if gdb_protocol
is set.
(corefile_test_attach): Likewise.  Check can_spawn_for_attach
instead of is_remote.

Fix is_remote check in gdb.base/remote.exp

1. Otherwise, when the native-gdbserver board stops setting is_remote,
   this test would stop running there.

2. Makes the test run with --target_board=native-extended-gdbserver
   too.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/remote.exp: Check gdb_protocol instead of is_remote.
(top level): Add comment.

gdb.base/remote.exp: Fix typo and add missing return

(Dropped 'u' while at it because we're supposed to prefer American
English spelling...)

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/remote.exp (top level): Fix comment typo and add
missing return.

Make gdb.base/solib-nodir.exp work with --target_board=native-extended-gdbserver

Fixes:
 Running .../src/gdb/testsuite/gdb.base/solib-nodir.exp ...
 FAIL: gdb.base/solib-nodir.exp: library loaded

... by using the new "set cwd" command.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>
    Simon Marchi <simon.marchi@polymtl.ca>

* gdb.base/solib-nodir.exp: Split is_remote and skip_shlib_tests
calls and add comments.  Skip test if use_gdb_stub is set.
(top level): Use "set cwd" command instead of "cd" command.

Eliminate is_remote check in gdb.base/shlib-call.exp

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/shlib-call.exp (top level): Use gdb_run_cmd and remove
is_remote target check.

Remove simple_displaced_step_copy_insn

Nothing uses this function.  Remove it, and adjust comments referring to
it.

gdb/ChangeLog:

* arch-utils.h (simple_displaced_step_copy_insn): Remove.
* arch-utils.c (simple_displaced_step_copy_insn): Remove.
* gdbarch.sh (displaced_step_copy_insn): Adjust comment.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn):
Adjust comment.
* i386-tdep.c (i386_displaced_step_copy_insn): Adjust comment.
(i386_displaced_step_fixup): Adjust comment.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Adjust comment.

FT32: support for FT32B processor - part 1

FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.

Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.

bfd/ChangeLog:

2017-10-12  James Bowman  <james.bowman@ftdichip.com>

* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.

gas/ChangeLog:

2017-10-12  James Bowman  <james.bowman@ftdichip.com>

* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.

include/ChangeLog:

2017-10-12  James Bowman  <james.bowman@ftdichip.com>

* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.

opcodes/ChangeLog:

2017-10-12  James Bowman  <james.bowman@ftdichip.com>

* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.

sim/ChangeLog:

2017-10-12  James Bowman  <james.bowman@ftdichip.com>

* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.

Add myself as ft32 maintainer for sim.

sim/ChangeLog:
2017-10-12  James Bowman  <james.bowman@ftdichip.com>

* MAINTAINERS (ft32): Add myself.

Eliminate is_remote check in gdb.base/scope.exp

This commit makes --target_board=native-gdbserver (and in principle
all other is_remote boards) pass all the same gdb.base/scope.exp tests
as native testing.

I first wrote the gdb.base/scope.exp change described in the ChangeLog
below and in the new comments in the patch, knowing that gdb_file_cmd
was the right thing to use here.

However, that revealed that the native-extended-gdbserver board should
be overriding gdb_file_cmd+gdb_reload instead of gdb_load, as is
hinted at by the comments on top of the default implementations in
testsuite/lib/gdb.exp, because otherwise a gdb_run_cmd after
gdb_file_cmd misses setting "set remote exec-file".  However, if we do
that and remove gdb_load, then we regress gdb.base/dbx.exp, so for now
keep the gdb_load override as well.

gdb/testsuite/ChangeLog:
2017-10-13  Pedro Alves  <palves@redhat.com>

* gdb.base/scope.exp: Use build_executable + clean_restart +
gdb_file_cmd instead of prepare_for_testing and no longer skip
"before run" tests on is_remote target boards.  Update comments.
* boards/native-extended-gdbserver.exp
(extended_gdbserver_load_last_file): New, factored out from ...
(gdb_load): ... this.  Move further below and add comment.
(extended_gdbserver_gdb_file_cmd, gdb_file_cmd, gdb_reload): New.

Automatic date update in version.in

Remove references to gdb64 in the testsuite

I'm not sure whether this gdb64 was ever a thing in the upstream repo,
but it certainly doesn't exist nowadays.

AFAICT, this came in with the original big merge with the HP tree:
https://sourceware.org/ml/gdb-patches/1999-q2/msg00149.html

gdb/testsuite/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>

* gdb.base/attach.exp: Remove references to gdb64.
* gdb.base/dbx.exp: Remove references to gdb64.

Remove is_remote check in labels.exp

This works fine with remote target boards.

gdb/testsuite/ChangeLog:
2017-10-12  Simon Marchi  <simon.marchi@polymtl.ca>
    Pedro Alves  <palves@redhat.com>

* gdb.base/label.exp: Remove is_remote target check.

Make gdb.base/auvx.exp work with --target_board=native-extended-gdbserver

Currently we get:
 Running .../src/gdb/testsuite/gdb.base/auxv.exp ...
 WARNING: can't generate a core file - core tests suppressed - check ulimit -c

After this commit we get all the same PASSes as when native testing.

The problem is that the testcase wants to create a core dump in a
temporary directory and it is using the "cd" command to start the
inferior with that directory as current directory, but that command
only affects the inferior's cwd when native debugging.  Fix it by
using using the new "set cwd" command instead, which works with
gdbserver as well.

This still won't work with stub-like targets, because with those when
we connect the inferior is already running.  It'd be possible to make
it work by making the inferior itself change dirs, but we'll need to
make the native-gdbserver board no longer set is_remote first.

gdb/testsuite/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>

* gdb.base/auvx.exp (coredir): Update comment.
(top level) <core_works>: Use "set cwd" command instead of "cd"
command.

Add a compile-time test for PR ld/22263

This compile-time test requires a target C compiler to run.  It fails
on many targets where ELF backend linkers incorrectly check bfd_link_pic
for TLS relocations, which should check bfd_link_executable instead.

PR ld/22263
* testsuite/ld-elf/pr22263-1.rd: New file.
* testsuite/ld-elf/pr22263-1a.c: Likewise.
* testsuite/ld-elf/pr22263-1b.c: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.

Use bool in pv_area

This updates a couple of member functions in pv_area to return bool.

gdb/ChangeLog
2017-10-12  Tom Tromey  <tom@tromey.com>

* prologue-value.h (pv_area::store_would_trash): Return bool.
(pv_area::find_reg): Likewise.
* prologue-value.c (pv_area::store_would_trash): Return bool.
(pv_area::find_reg): Likewise.

C++-ify prologue-value's pv_area

This patch is an initial C++-ification of pv_area, from
prologue-value.  It turns pv_area into a class with a constructor and
destructor; renames the data members; and changes various functions to
be member functions.  This allows the removal of
make_cleanup_free_pv_area.

gdb/ChangeLog
2017-10-12  Tom Tromey  <tom@tromey.com>

* s390-linux-tdep.c (s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue): Update.
* rx-tdep.c (check_for_saved, rx_analyze_prologue): Update.
* rl78-tdep.c (rl78_analyze_prologue, check_for_saved): Update.
* prologue-value.h (class pv_area): Move from prologue-value.c.
Change names of members.  Add constructor, destructor, member
functions.
(make_pv_area, free_pv_area, make_cleanup_free_pv_area)
(pv_area_store, pv_area_fetch, pv_area_store_would_trash)
(pv_area_fetch, pv_area_scan): Don't declare.
* prologue-value.c (struct pv_area::area_entry): Now member of
pv_area.
(struct pv_area): Move to prologue-value.h.
(pv_area::pv_area): Rename from make_pv_area.
(pv_area::~pv_area): Rename from free_pv_area.
(do_free_pv_area_cleanup, make_cleanup_free_pv_area): Remove.
(clear_entries, find_entry, overlaps, store_would_trash, store)
(fetch, find_reg, scan): Now member of pv_area.
Remove "area" argument.  Update.
* msp430-tdep.c (check_for_saved, msp430_analyze_prologue):
Update.
* mn10300-tdep.c (push_reg, check_for_saved)
(mn10300_analyze_prologue): Update.
* mep-tdep.c (is_arg_spill, check_for_saved)
(mep_analyze_prologue): Update.
* m32c-tdep.c (m32c_pv_push, m32c_srcdest_fetch)
(m32c_srcdest_store, m32c_pv_enter, m32c_is_arg_spill)
(m32c_is_struct_return, m32c_analyze_prologue): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_analyze_prologue):
Update.
* arc-tdep.c (arc_is_in_prologue, arc_analyze_prologue): Update.
* aarch64-tdep.c (aarch64_analyze_prologue): Update.

linux low: Make the arch code free arch_process_info

For the same reason as the previous patch, we need to make the
arch-specific code free the arch_process_info structure it allocates.

gdb/gdbserver/ChangeLog:

* linux-low.h (struct linux_target_ops) <delete_process>: New
field.
* linux-low.c (linux_mourn): Call the_low_target.delete_process.
* linux-aarch64-low.c (aarch64_linux_delete_process): New.
(struct linux_target_ops): Add delete_process callback.
* linux-arm-low.c (arm_delete_process): New.
(struct linux_target_ops): Add delete_process callback.
* linux-bfin-low.c (struct linux_target_ops): Likewise.
* linux-crisv32-low.c (struct linux_target_ops): Likewise.
* linux-m32r-low.c (struct linux_target_ops): Likewise.
* linux-mips-low.c (mips_linux_delete_process): New.
(struct linux_target_ops): Add delete_process callback.
* linux-ppc-low.c (struct linux_target_ops): Likewise.
* linux-s390-low.c (struct linux_target_ops): Likewise.
* linux-sh-low.c (struct linux_target_ops): Likewise.
* linux-tic6x-low.c (struct linux_target_ops): Likewise.
* linux-tile-low.c (struct linux_target_ops): Likewise.
* linux-x86-low.c (x86_linux_delete_process): New.
(struct linux_target_ops): Add delete_process callback.
* linux-xtensa-low.c (struct linux_target_ops): Likewise.

lwp_info: Make the arch code free arch_lwp_info

I have the goal of "poisoning" the XNEW/xfree-family of functions, so
that we catch their usages with non-POD types.  A few things need to be
fixed in the mean time, this is one.

The common lwp code in linux-nat.c and gdbserver/linux-low.c xfrees the
private lwp data of type arch_lwp_info.  However, that type is opaque
from its point of view, as its defined differently in each arch-specific
implementation.  This trips on the std::is_pod<T> check, since the
compiler can't tell whether the type is POD or not if it doesn't know
about it.

My initial patch [1] made a class hierarchy with a virtual destructor.
However, as Pedro pointed out, we only have one native architecture at
the time built in gdb and gdbserver, so that's overkill.  Instead, we
can move the responsibility of free'ing arch_lwp_info to the arch code
(which is also the one that allocated it in the first place).  This is
what this patch does.

Also, I had the concern that if we wanted to use C++ features in these
structures, we would have a problem with the one-definition rule.
However, since a build will only have one version of arch_lwp_info,
that's not a problem.

There are changes in arch-specific files, I was only able to built-test
this patch with the following cross-compilers:

  aarch64-linux-gnu
  alpha-linux-gnu
  arm-linux-gnueabihf
  hppa-linux-gnu
  m68k-linux-gnu
  mips64el-linux-gnuabi64
  powerpc64-linux-gnu
  s390x-linux-gnu
  sh4-linux-gnu
  sparc64-linux-gnu
  x86_64-linux-gnu
  x86_64-w64-mingw32

A buildbot run didn't find any regression.

[1] https://sourceware.org/ml/gdb-patches/2017-08/msg00255.html

gdb/ChangeLog:

* linux-nat.h (linux_nat_set_delete_thread): New declaration.
* linux-nat.c (linux_nat_delete_thread): New variable.
(lwp_free): Invoke linux_nat_delete_thread if set.
(linux_nat_set_delete_thread): New function.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Assign
thread delete callback.
* arm-linux-nat.c (arm_linux_delete_thread): New function.
(_initialize_arm_linux_nat): Assign thread delete callback.
* s390-linux-nat.c (s390_delete_thread): New function.
(_initialize_s390_nat): Assign thread delete callback.
* x86-linux-nat.c (x86_linux_add_target): Likewise.
* nat/aarch64-linux.c (aarch64_linux_delete_thread): New
function.
* nat/aarch64-linux.h (aarch64_linux_delete_thread): New
declaration.
* nat/x86-linux.c (x86_linux_delete_thread): New function.
* nat/x86-linux.h (x86_linux_delete_thread): New declaration.

gdb/gdbserver/ChangeLog:

* linux-aarch64-low.c (the_low_target): Add thread delete
callback.
* linux-arm-low.c (arm_delete_thread): New function.
(the_low_target): Add thread delete callback.
* linux-bfin-low.c (the_low_target): Likewise.
* linux-crisv32-low.c (the_low_target): Likewise.
* linux-low.c (delete_lwp): Invoke delete_thread callback if
set.
* linux-low.h (struct linux_target_ops) <delete_thread>: New
field.
* linux-m32r-low.c (the_low_target): Add thread delete callback.
* linux-mips-low.c (mips_linux_delete_thread): New function.
(the_low_target): Add thread delete callback.
* linux-ppc-low.c (the_low_target): Likewise.
* linux-s390-low.c (the_low_target): Likewise.
* linux-sh-low.c (the_low_target): Likewise.
* linux-tic6x-low.c (the_low_target): Likewise.
* linux-tile-low.c (the_low_target): Likewise.
* linux-x86-low.c (the_low_target): Likewise.
* linux-xtensa-low.c (the_low_target): Likewise.

Run gdb.base/catch-fork-static.exp on remote target boards

Another case of a stale check.  We support following forks in the
remote protocol nowadays.

gdb/testsuite/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>
    Simon Marchi  <simon.marchi@polymtl.ca>

* gdb.base/catch-fork-static.exp: No longer skip on is_remote
target boards.

checkpoint.exp: Check for non-"target native" instead of isnative/is_remote

This gets rid of a number of FAILs with
--target_board=native-extended-gdbserver.

The fact that checkpointing does not work has nothing to do with
dejagnu's native and remote concepts.  It only works with native Linux
targets because the implementation is currently baked with
linux-nat.c.

gdb/testsuite/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>
    Simon Marchi  <simon.marchi@polymtl.ca>

* gdb.base/checkpoint.exp: Don't check is_remote or isnative.
Instead skip if there's any gdb_protocol set.

Remove is_remote target check from gdb.base/dprintf-non-stop.exp

1. is_remote is not the right check.

2. Both Simon & Pedro ran it continuously for some time against
   native-gdbserver and didn't see a failure.

3. The test has been running against native-extended-gdbserver anyway.

gdb/testsuite/ChangeLog:
2017-10-12  Simon Marchi  <simon.marchi@polymtl.ca>
    Pedro Alves  <palves@redhat.com>

* gdb.base/dprintf-non-stop.exp: Remove is_remote target check.

Tighten remote check in gdb.base/argv0-symlink.exp

Check for gdbserver instead of dejagnu remote.  Unlike what the
comment says, the test actually fails with target remote + gdbserver
(it does pass with extended-remote).  The result is:

 FAIL -> KFAIL with --target_board=native-gdbserver
 KPASS -> PASS with --target_board=native-extended-gdbserver

gdb/testsuite/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>
    Simon Marchi  <simon.marchi@polymtl.ca>

* gdb.base/argv0-symlink.exp: kfail on remote gdbserver,
instead of on dejagnu remote boards.

Enable gdb.base/inferior-died.exp on is_remote target boards

We support follow-fork in the remote protocol nowadays.

Also, the right way to enable non-stop mode is to do it before
connecting, and for use_gdb_stub boards, that means we have to do it
at gdb_load time.  The "modern" pattern for that is to pass non-stop
in GDBFLAGS.

This makes the test pass with --target_board=native-gdbserver.

gdb/testsuite/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>
    Simon Marchi <simon.marchi@polymtl.ca>

* gdb.base/inferior-died.exp: Remove is_remote and isnative
checks.  Use build_executable + clean_restart instead of
prepare_for_testing.  Pass "set non-stop on" via GDBFLAGS instead
of enabling non-stop after starting gdb.

Enable gdb.threads/non-ldr-exc-*.exp on is_remote target boards

This commit makes the gdb.threads/non-ldr-exc-*.exp tests run (and
pass) with --target_board=native-gdbserver.

(These tests were already running with
--target_board=native-extended-gdbserver, because that board is not
is_remote.)

The "No exec event support in the remote protocol." comment is stale.
It's actually supported.

gdb/ChangeLog:
2017-10-12  Pedro Alves  <palves@redhat.com>

* gdb.threads/non-ldr-exc-1.exp: No longer skip if is_remote target.
* gdb.threads/non-ldr-exc-2.exp: Ditto.
* gdb.threads/non-ldr-exc-3.exp: Ditto.
* gdb.threads/non-ldr-exc-4.exp: Ditto.

ld whitespace fixes

* pe-dll.c: Formatting, whitespace fixes.
* NEWS: Whitespace fixes.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* deffilep.y: Likewise.
* genscripts.sh: Likewise.
* ld.texinfo: Likewise.
* ldgram.y: Likewise.
* ldlang.c: Likewise.
* ldlex.l: Likewise.
* lexsup.c: Likewise.
* plugin.c: Likewise.
* emulparams/arc-endianness.sh: Likewise.
* emulparams/elf32_x86_64.sh: Likewise.
* emulparams/elf64mmix.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/h8300elf.sh: Likewise.
* emulparams/h8300elf_linux.sh: Likewise.
* emulparams/vxworks.sh: Likewise.
* emultempl/aarch64elf.em: Likewise.
* emultempl/aix.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/avrelf.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/m68kcoff.em: Likewise.
* emultempl/m68kelf.em: Likewise.
* emultempl/metagelf.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/nds32elf.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/sh64elf.em: Likewise.
* emultempl/spu_ovl.S: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/tic6xdsbt.em: Likewise.
* emultempl/ticoff.em: Likewise.
* emultempl/vms.em: Likewise.
* po/Make-in: Likewise.
* scripttempl/DWARF.sc: Likewise.
* scripttempl/aix.sc: Likewise.
* scripttempl/alpha.sc: Likewise.
* scripttempl/alphavms.sc: Likewise.
* scripttempl/aout.sc: Likewise.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/armaout.sc: Likewise.
* scripttempl/armbpabi.sc: Likewise.
* scripttempl/armcoff.sc: Likewise.
* scripttempl/avr.sc: Likewise.
* scripttempl/crisaout.sc: Likewise.
* scripttempl/delta68.sc: Likewise.
* scripttempl/dlx.sc: Likewise.
* scripttempl/elf.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32cr16c.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf32xc16x.sc: Likewise.
* scripttempl/elf32xc16xl.sc: Likewise.
* scripttempl/elf32xc16xs.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfarcv2.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfmicroblaze.sc: Likewise.
* scripttempl/elfxgate.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/epiphany_4x4.sc: Likewise.
* scripttempl/epocpe.sc: Likewise.
* scripttempl/h8300.sc: Likewise.
* scripttempl/h8300h.sc: Likewise.
* scripttempl/h8300hn.sc: Likewise.
* scripttempl/h8300s.sc: Likewise.
* scripttempl/h8300sn.sc: Likewise.
* scripttempl/h8300sx.sc: Likewise.
* scripttempl/h8300sxn.sc: Likewise.
* scripttempl/h8500.sc: Likewise.
* scripttempl/h8500b.sc: Likewise.
* scripttempl/h8500c.sc: Likewise.
* scripttempl/h8500m.sc: Likewise.
* scripttempl/h8500s.sc: Likewise.
* scripttempl/hppaelf.sc: Likewise.
* scripttempl/i386beos.sc: Likewise.
* scripttempl/i386coff.sc: Likewise.
* scripttempl/i386go32.sc: Likewise.
* scripttempl/i386msdos.sc: Likewise.
* scripttempl/i860coff.sc: Likewise.
* scripttempl/i960.sc: Likewise.
* scripttempl/ia64vms.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/m68kaux.sc: Likewise.
* scripttempl/m68kcoff.sc: Likewise.
* scripttempl/m88kbcs.sc: Likewise.
* scripttempl/mcorepe.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mips.sc: Likewise.
* scripttempl/mipsbsd.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/moxie.sc: Likewise.
* scripttempl/nds32elf.sc: Likewise.
* scripttempl/nw.sc: Likewise.
* scripttempl/pe.sc: Likewise.
* scripttempl/pep.sc: Likewise.
* scripttempl/pj.sc: Likewise.
* scripttempl/ppcpe.sc: Likewise.
* scripttempl/psos.sc: Likewise.
* scripttempl/riscix.sc: Likewise.
* scripttempl/sh.sc: Likewise.
* scripttempl/sparccoff.sc: Likewise.
* scripttempl/st2000.sc: Likewise.
* scripttempl/tic30aout.sc: Likewise.
* scripttempl/tic30coff.sc: Likewise.
* scripttempl/tic4xcoff.sc: Likewise.
* scripttempl/tic54xcoff.sc: Likewise.
* scripttempl/tic80coff.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/v850_rh850.sc: Likewise.
* scripttempl/vanilla.sc: Likewise.
* scripttempl/visium.sc: Likewise.
* scripttempl/w65.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
* scripttempl/z80.sc: Likewise.
* scripttempl/z8000.sc: Likewise.
* configure: Regenerate.

Force the AArch64 linker backend to refuse to link when it encounters unresoleable relocations.

* reloc.c (enum bfd_reloc_status): Start values at 2.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (aarch64_relocate): Invert sense of function, so
that a TRUE return indicates success.  Compare the result of
calling _bfd_aarch64_elf_put_addend against bfd_reloc_ok.
(build_one_stub): Change sense of tests against aarch64_relocate
return value.
(elfNN_aarch64_tls_relax): Return bfd_reloc_notsupported, rather
than FALSE, when an error is detected.
(elfNN_aarch64_final_link_relocate): Likewise.

* testsuite/ld-aarch64/pcrel_pic_defined.d: Expect errors not
warnings.  Expect errors about unsupported relocations.
* testsuite/ld-aarch64/pcrel_pic_undefined.d: Likewise.

x86: Add _bfd_x86_elf_hide_symbol

When there is no dynamic interpreter in PIE, make the undefined weak
symbol dynamic so that PC relative branch to the undefined weak symbol
will land to address 0.

* elf32-i386.c (elf_backend_hide_symbol): New.
* elf64-x86-64.c (elf_backend_hide_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_hide_symbol): Likewise.
* elfxx-x86.h (_bfd_x86_elf_hide_symbol): Likewise.

ld: Update tests for warning of "-z dynamic-undefined-weak ignored"

Update tests to expect warning of "-z dynamic-undefined-weak ignored"
from

commit 22b1ee183d19a92cc57859c04307d31c06792d13
Author: Alan Modra <amodra@gmail.com>
Date:   Thu Oct 12 13:19:10 2017 +1030

    Set dynamic_undefined_weak to zero for static PIEs

* testsuite/ld-elf/pr22269b.d: Expect warning of
"-z dynamic-undefined-weak ignored".
* testsuite/ld-i386/pr19636-1j.d: Likewise.
* testsuite/ld-i386/pr19636-1k.d: Likewise.
* testsuite/ld-i386/pr19636-1l.d: Likewise.
* testsuite/ld-x86-64/pr19636-2j.d: Likewise.
* testsuite/ld-x86-64/pr19636-2k.d: Likewise.
* testsuite/ld-x86-64/pr19636-2l.d: Likewise.
* testsuite/ld-x86-64/pr19636-2m.d: Likewise.

Set dynamic_undefined_weak to zero for static PIEs

I believe we should be warning if ld is given both --no-dynamic-linker
and -z dynamic-undefined-weak.  The two options are contradictory, the
first says an executable has no dynamic interpreter to resolve dynamic
symbols, while the second is asking for dynamic symbols to be emitted.
(And even if a static PIE's relocation code, which is needed to
process R_*_RELATIVE relocs, could process symbols, there are no
DT_NEEDED dynamic objects to define such symbols.)

I also think that dynamic_undefined_weak is the right flag to control
whether undefined weaks are made dynamic, whether in static PIEs or
anywhere else.  So force it to 0 for static PIEs, fixing PR 22269 for
powerpc and any other target where the backend usually defaults to
undefined weaks being made dynamic.

This patch introduces regressions.  I'd normally not do that, but
these are all in very recently added test cases, or expose bugs in the
x86 backend.  The test cases were added after I'd made it known that
this patch or one like it was imminent.

PR 22269
* emultempl/elf32.em (after_parse): Warn on --no-dynamic-linker
-z dynamic-undefined-weak combination.  Set dynamic_undefined_weak
to zero when nointerp.

_bfd_elf_link_hash_hide_symbol calls in generic ELF code

This function shouldn't be called directly, except from backend code.

bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Call
elf_backend_hide_symbol, not _bfd_elf_link_hash_hide_symbol.
(bfd_elf_define_start_stop): Likewise.
ld/
* emultempl/elf32.em (before_allocation): Call
elf_backend_hide_symbol, not _bfd_elf_link_hash_hide_symbol.
Formatting.

Fix remaining targets using wrong .interp conditions

* elf32-nds32.c (nds32_elf_size_dynamic_sections): Set .interp
when executable rather than non-PIC.
* elf32-score.c (s3_bfd_score_elf_size_dynamic_sections): Likewise.
* elf32-score7.c (s7_bfd_score_elf_size_dynamic_sections): Likewise.

Automatic date update in version.in

Remove cleanups from TUI

This removes the last cleanups from the TUI, by using std::string
rather than manual memory management.

Regression tested against gdb.tui/*.exp on Fedora 26 x86-64.

gdb/ChangeLog
2017-10-09  Tom Tromey  <tom@tromey.com>

* tui/tui-win.c (tui_set_win_height, parse_scrolling_args): Use
std::string.
* tui/tui-layout.c (enum tui_status): Use std::string.

Constify add_prefix_cmd

This changes add_prefix_cmd to accept a const-taking function as an
argument; then fixes up all the callers.

In a couple of spots I had to add a non-const overload of a function,
because the function is passed to two different command-adding
"constructors".  These overloads are temporary; once constification is
complete they can be removed.

This patch also fixes a typo I happened to notice while constifying.

Note that this touches a couple of files (gnu-nat.c and go32-nat.c)
that I can't build.  So, while I made a best-effort there, I am not
certain they will still compile.

Tested by rebuilding.

gdb/ChangeLog
2017-10-11  Tom Tromey  <tom@tromey.com>

* gdbthread.h (thread_command): Constify.
* inferior.h (detach_command): Constify.
* top.h (set_history, show_history): Constify.
* arm-tdep.c (set_arm_command, show_arm_command): Constify.
* serial.c (serial_set_cmd, serial_show_cmd): Constify.
* bsd-kvm.c (bsd_kvm_cmd): Constify.
* printcmd.c (set_command): Constify.
(non_const_set_command): New function.
* dcache.c (set_dcache_command, show_dcache_command): Constify.
* breakpoint.c (enable_command, disable_command, delete_command)
(catch_command, tcatch_command, set_breakpoint_cmd)
(show_breakpoint_cmd): Constify.
* macrocmd.c (macro_command): Constify.
* infcmd.c (unset_command, kill_command, detach_command)
(info_proc_cmd): Constify.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify.
* auto-load.c (show_auto_load_cmd, set_auto_load_cmd)
(info_auto_load_cmd): Constify.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Constify.
* ada-lang.c (set_ada_command, show_ada_command)
(maint_set_ada_cmd, maint_show_ada_cmd): Constify.
* guile/guile.c (set_guile_command, show_guile_command)
(info_guile_command): Constify.
* tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd):
Constify.
* skip.c (skip_command): Constify.
* compile/compile.c (_initialize_compile): Constify.
* dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd): Constify.
* remote.c (set_remote_cmd, show_remote_cmd, remote_command):
Constify.
* python/python.c (user_show_python, user_set_python): Constify.
* mips-tdep.c (set_mips_command, show_mips_command)
(set_mipsfpu_command): Constify.
* record-btrace.c (cmd_record_btrace_start)
(cmd_set_record_btrace, cmd_show_record_btrace)
(cmd_set_record_btrace_bts, cmd_show_record_btrace_bts)
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command):
Constify.
* symfile.c (overlay_command): Constify.
* spu-tdep.c (set_spu_command, show_spu_command): Constify.
* cli/cli-logging.c (set_logging_command, show_logging_command):
Constify.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Constify.
* cli/cli-decode.c (struct cmd_list_element): Change type of
"fun".
* cli/cli-cmds.c (info_command, show_command, set_debug)
(show_debug): Constify.
(show_command): Add non-const overload.
* top.c (set_history, show_history): Constify.
* sh-tdep.c (set_sh_command, show_sh_command): Constify.
* command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype.
* target.c (target_command): Constify.
* sparc64-tdep.c (info_adi_command): Constify.
* record-full.c (cmd_record_full_start): Constify.
(set_record_full_command): Constify.  Fix typo.
(show_record_full_command): Constify.
* thread.c (thread_command, thread_apply_command): Constify.
* memattr.c (dummy_cmd): Constify.
* value.c (function_command): Constify.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify.
* probe.c (info_probes_command): Constify.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify.
* gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd)
(show_thread_cmd, set_thread_default_cmd)
(show_thread_default_cmd): Constify.
(check_empty): Constify.
* tracepoint.c (tfind_command): Constify.
* cp-support.c (maint_cplus_command): Constify.
* windows-tdep.c (info_w32_command): Constify.
* record.c (cmd_record_start, set_record_command)
(show_record_command, info_record_command, cmd_record_goto):
Constify.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Constify.
* utils.c (set_internal_problem_cmd, show_internal_problem_cmd):
Constify.
(add_internal_problem_command): Remove casts.
* arc-tdep.c (maintenance_print_arc_command): Constify.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Constify.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd)
(maintenance_show_cmd, set_per_command_cmd)
(show_per_command_cmd, maintenance_check_command): Constify.
* language.c (set_check, show_check): Constify.
* typeprint.c (show_print_type, set_print_type): Constify.
* go32-nat.c (go32_info_dos_command): Constify.

Remove prepare_re_set_context

prepare_re_set_context returns a null cleanup and doesn't seem
generally useful.  This patch removes it plus a few more cleanups; and
changes breakpoint_re_set to use scoped_restore rather than its own
manual mechanism.

2017-10-11  Tom Tromey  <tom@tromey.com>

* breakpoint.c (prepare_re_set_context): Remove.
(breakpoint_re_set_one): Update.  Don't use cleanups.
(breakpoint_re_set): Use scoped_restore, std::string, and
scoped_restore_current_language.

Remove some cleanups from breakpoint.c

This removes some cleanups from breakpoint.c, replacing them with C++
data structures.

2017-10-11  Tom Tromey  <tom@tromey.com>

* breakpoint.c (commands_command_1): Use std::string.
(cleanup_executing_breakpoints): Remove.
(bpstat_do_actions_1): Use scoped_restore.
(bpstat_check_watchpoint): Use std::string.
(decode_static_tracepoint_spec): Likewise.
(break_range_command): Likewise.
(watch_command_1): Likewise.
(compare_breakpoints): Change argument types.
(clear_command): Use std::vector.
(cleanup_executing_breakpoints): Remove.
(update_global_location_list): Use unique_xmalloc_ptr.
(strace_command): Remove unused declaration.

Add 2 testcases for PR ld/22269

Since undefined weak symbols in static PIE are always resolved to 0 at
run-time, linker should resolve them as 0 at link-time, regardless of
whether "-z dynamic-undefined-weak" is used.  "-z dynamic-undefined-weak"
only makes undefined weak symbols dynamic, but doesn't change undefined
weak symbol resolution in static PIE at link-time.  These tests currently
pass on x86, but fails on many other targets.

The framework to resolve weak symbols in static PE at link-time is
posted at

https://sourceware.org/ml/binutils/2017-10/msg00087.html

which requires users/hjl/check_relocs branch to call check_relocs after
opening all inputs.  I will submit backend patches for failling targets
after merging users/hjl/check_relocs branch next.

* PR ld/22269
* testsuite/ld-elf/pr22269.s: New file.
* testsuite/ld-elf/pr22269a.d: Likewise.
* testsuite/ld-elf/pr22269b.d: Likewise.

x86: Run PR ld/19636 tests with -z dynamic-undefined-weak

"-z dynamic-undefined-weak" makes undefined weak symbols dynamic, but
undefined weak symbols are still resolved to 0 at link-time if there
is no dynamic linker in executable.

* testsuite/ld-i386/i386.exp: Run pr19636-1j, pr19636-1k,
pr19636-1l, pr19636-3h and pr19636-3i.
* testsuite/ld-i386/pr19636-1j.d: New file.
* testsuite/ld-i386/pr19636-1k.d: Likewise.
* testsuite/ld-i386/pr19636-1l.d: Likewise.
* testsuite/ld-i386/pr19636-3h.d: Likewise.
* testsuite/ld-i386/pr19636-3i.d: Likewise.
* testsuite/ld-x86-64/pr19636-1h.d: Likewise.
* testsuite/ld-x86-64/pr19636-1i.d: Likewise.
* testsuite/ld-x86-64/pr19636-1j.d: Likewise.
* testsuite/ld-x86-64/pr19636-2j.d: Likewise.
* testsuite/ld-x86-64/pr19636-2k.d: Likewise.
* testsuite/ld-x86-64/pr19636-2l.d: Likewise.
* testsuite/ld-x86-64/pr19636-2m.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr19636-1h, pr19636-1i,
pr19636-1j, pr19636-2j, pr19636-2k, pr19636-2l and pr19636-2m.

Add native target for FreeBSD/arm.

gdb/ChangeLog:

* Makefile.in (ALLDEPFILES): Add arm-fbsd-nat.c.
* NEWS: Mention new FreeBSD/arm native configuration.
* configure.host: Add arm*-*-freebsd*.
* configure.nat: Likewise.
* arm-fbsd-nat.c: New file.

Add FreeBSD/arm architecture.

Support for collecting and supplying general purpose and floating
point registers is provided along with signal frame unwinding.  While
FreeBSD/arm kernels do populate NT_FPREGSET notes, they are always
zero-filled, so this implementation ignores them.  Recent FreeBSD/arm
kernels generate NT_ARM_VFP notes which are used to supply
floating-point registers.  As with Linux, the AT_HWCAP feature flags
are used to determine the correct target description.

gdb/ChangeLog:

* Makefile.in (ALL_TARGET_OBS): Add arm-fbsd-tdep.o.
(ALLDEPFILES): Add arm-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/arm target.
* configure.tgt: Add arm*-*-freebsd*.
* arm-fbsd-tdep.c: New file.
* arm-fbsd-tdep.h: New file.

Disable the inclusion of logical input files in the assembler listing output unless high level source listing has been enabled.

PR 21977
* listing.c (listing_newline): Use the name of the current
physical input file, rather than the current logical input file,
unless including high level source in the listing.
* input-scrub.c (as_where_physical): New function.  Returns the
name of the current physical input file.
* as.h: Add prototype for as_where_physical.

GDB: Remove Linux core PRPSINFO note writer override

Revert parts of commit b3ac9c77560a ("Put more info in NT_PRPSINFO Linux
notes"), <https://sourceware.org/ml/binutils/2013-02/msg00024.html>, and
remove support for a Linux core PRPSINFO note writer override, now that
all variants are handled automatically within BFD itself.

gdb/
* linux-tdep.c (linux_make_corefile_notes): Remove call to
`gdbarch_elfcore_write_linux_prpsinfo'.
* gdbarch.sh (elfcore_write_linux_prpsinfo): Remove architecture
method.
(elf_internal_linux_prpsinfo): Remove declaration.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.

ELF/BFD: Handle both variants of the 64-bit Linux core PRPSINFO note

Fix commit 70a38d42c5b3 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and handle both variants of the 64-bit Linux core PRPSINFO note across
all targets.

The 64-bit Linux core PRPSINFO note matches the 64-bit kernel structure,
defined as follows:

(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
    char pr_state;
    char pr_sname;
    char pr_zomb;
    char pr_nice;
    unsigned long pr_flag;
    __kernel_uid_t pr_uid;
    __kernel_gid_t pr_gid;
    pid_t pr_pid;
    pid_t pr_ppid;
    pid_t pr_pgrp;
    pid_t pr_sid;
    char pr_fname[16];
    char pr_psargs[80];
}
(gdb)

where the individual data types of most members are the same across all
64-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'.  These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for the SuperH target.

The default is already handled, as from the commit referred.  Add the
other variant then and provide a backend flag to switch between the two
cases possible, with the 32-bit one being the default and the 16-bit one
explicitly selected.  Set the flag in the SuperH target backend.  This
arrangement is analogous to how the 32-bit Linux core PRPSINFO note is
handled.

bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo64_ugid16'
member.
* elf-linux-core.h (elf_external_linux_prpsinfo64): Rename to...
(elf_external_linux_prpsinfo64_ugid32): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid32_out): ... this.
(elf_external_linux_prpsinfo64_ugid16): New structure.
(swap_linux_prpsinfo64_ugid16_out): New function.
* elfxx-target.h [!elf_backend_linux_prpsinfo64_ugid16]
(elf_backend_linux_prpsinfo64_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo64_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo64): Handle both variants
of the 64-bit Linux core PRPSINFO note.
* elf64-sh64.c (elf_backend_linux_prpsinfo64_ugid16): Define.

ELF/BFD,GDB: Handle both variants of the 32-bit Linux core PRPSINFO note

Fix commit 70a38d42c5b3 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and commit b3ac9c77560a ("Put more info in NT_PRPSINFO Linux notes"),
<https://sourceware.org/ml/binutils/2013-02/msg00024.html>, and handle
both variants of the 32-bit Linux core PRPSINFO note across all targets.

The 32-bit Linux core PRPSINFO note matches the 32-bit kernel structure,
defined as follows:

(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
    char pr_state;
    char pr_sname;
    char pr_zomb;
    char pr_nice;
    unsigned long pr_flag;
    __kernel_uid_t pr_uid;
    __kernel_gid_t pr_gid;
    pid_t pr_pid;
    pid_t pr_ppid;
    pid_t pr_pgrp;
    pid_t pr_sid;
    char pr_fname[16];
    char pr_psargs[80];
}
(gdb)

where the individual data types of most members are the same across all
32-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'.  These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for a few targets, mostly
earlier ports of Linux, specifically: ARM, CRIS, FR-V, M32R, m68k,
MN10300/AM33, s390, SuperH, SPARC and i386.

The default is the same as the PowerPC variant already handled, as from
the commits referred.  Make the special PowerPC case generic then,
removing the GDB part, and provide a backend flag to switch between the
two cases possible, with the 32-bit one being the default and the 16-bit
one explicitly selected.  Set the flag in the target backends affected.

bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo32_ugid16'
member.
(elfcore_write_ppc_linux_prpsinfo32): Remove prototype.
* elf32-ppc.c (elfcore_write_ppc_linux_prpsinfo32): Remove.
(elf_external_ppc_linux_prpsinfo32)
(swap_ppc_linux_prpsinfo32_out): Move to...
* elf-linux-core.h (elf_external_linux_prpsinfo32_ugid32)
(swap_linux_prpsinfo32_ugid32_out): ... these.
(elf_external_linux_prpsinfo32): Rename to...
(elf_external_linux_prpsinfo32_ugid16): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid16_out): ... this.
* elfxx-target.h [!elf_backend_linux_prpsinfo32_ugid16]
(elf_backend_linux_prpsinfo32_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo32_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo32): Handle both variants
of the 32-bit Linux core PRPSINFO note.
* elf32-am33lin.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-arm.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-cris.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-frv.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-i386.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m32r.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m68k.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-s390.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sh.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sparc.c (elf_backend_linux_prpsinfo32_ugid16): Define.

gdb/
* ppc-linux-tdep.c (ppc_linux_init_abi): Remove call to
`set_gdbarch_elfcore_write_linux_prpsinfo'.

ELF/BFD: Fix padding in `elf_external_linux_prpsinfo64'

Fix commit 70a38d42c5b3 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and move the padding of the `elf_external_linux_prpsinfo64' structure to
match the corresponding 64-bit Linux kernel `elf_prpsinfo' structure.

The 64-bit kernel structure is defined as follows:

(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
    char pr_state;
    char pr_sname;
    char pr_zomb;
    char pr_nice;
    unsigned long pr_flag;
    __kernel_uid_t pr_uid;
    __kernel_gid_t pr_gid;
    pid_t pr_pid;
    pid_t pr_ppid;
    pid_t pr_pgrp;
    pid_t pr_sid;
    char pr_fname[16];
    char pr_psargs[80];
}
(gdb) print /x &((struct elf_prpsinfo *)0)->pr_nice
$1 = 0x3
(gdb) print /x &((struct elf_prpsinfo *)0)->pr_flag
$2 = 0x8
(gdb) print /x &((struct elf_prpsinfo *)0)->pr_uid
$3 = 0x10
(gdb) print sizeof(((struct elf_prpsinfo *)0)->pr_flag)
$4 = 8
(gdb)

with implicit padding present before the `pr_flag' member, to correctly
align it to a multiple of 8.  Conversely `elf_external_linux_prpsinfo64'
has padding after its `pr_flag' member:

(top-gdb) ptype struct elf_external_linux_prpsinfo64
type = struct elf_external_linux_prpsinfo64 {
    char pr_state;
    char pr_sname;
    char pr_zomb;
    char pr_nice;
    char pr_flag[8];
    char gap[4];
    char pr_uid[4];
    char pr_gid[4];
    char pr_pid[4];
    char pr_ppid[4];
    char pr_pgrp[4];
    char pr_sid[4];
    char pr_fname[16];
    char pr_psargs[80];
}
(top-gdb) print /x &((struct elf_external_linux_prpsinfo64 *)0)->pr_nice
$1 = 0x3
(top-gdb) print /x &((struct elf_external_linux_prpsinfo64 *)0)->pr_flag
$2 = 0x4
(top-gdb) print /x &((struct elf_external_linux_prpsinfo64 *)0)->pr_uid
$3 = 0x10
(top-gdb)

and consequently `pr_flag' is misplaced.  Move `gap' ahead of `pr_flag'
then.

bfd/
* elf-linux-core.h (elf_external_linux_prpsinfo64): Move the
`gap' member ahead of `pr_flag'.

Garbage collect reattach_breakpoints

Not used anywhere.

gdb/ChangeLog:
2017-10-11  Pedro Alves  <palves@redhat.com>

* breakpoint.c (reattach_breakpoints): Delete.
* breakpoint.h (reattach_breakpoints): Delete.

Use std::vector for symtab_fns

Simple replacement of VEC with std::vector.

gdb/ChangeLog:

* symfile.c (registered_sym_fns): Make struct, not typedef.
(DEF_VEC_O (registered_sym_fns)): Remove.
(symtab_fns): Change type to std::vector.
(add_symtab_fns): Adjust.
(find_sym_fns): Adjust.

arc: Pass proper CPU value to the disassembler

There was a problem with generation of the disassembler options for ARC in GDB,
because a BFD architecture name was used as a CPU name, but they have different
meaning even if some architectures have same name as respective CPUs.  Target
description specifies a BFD architecture, which is different from ARC CPU, as
accepted by the disassembler (and most other ARC tools), because CPU values are
much more fine grained - there can be multiple CPU values per single BFD
architecture.  As a result this code should translate architecture to some CPU
value.  Since there is no info on exact CPU configuration, it is best to use
the most feature-rich CPU, so that the disassembler will recognize all
instructions available to the specified architecture.

gdb/ChangeLog
yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

* arc-tdep.c (arc_gdbarch_init): Pass proper cpu value to disassembler.
* arc-tdep.h (arc_arch_is_em): New function.
(arc_arch_is_hs): Likewise.

gdb/testsuite/ChangeLog
yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

* gdb.arch/arc-tdesc-cpu.exp: New file.
* gdb.arch/arc-tdesc-cpu.xml: Likewise.

Rename _doprnt -> _bfd_doprnt to fix DJGPP bfd build (and likely others)

Building bfd/ for DJGPP, I see:

 ../../src/bfd/bfd.c:642:1: error: conflicting types for '_doprnt'
  _doprnt (FILE *stream, const char *format, va_list ap)
  ^~~~~~~
 In file included from ../../src/bfd/sysdep.h:37:0,
  from ../../src/bfd/bfd.c:367:
 /usr/lib64/gcc/i586-pc-msdosdjgpp/6.1.0/include-fixed/stdio.h:171:5: note: previous declaration of '_doprnt' was here
  int _doprnt(const char *_fmt, va_list _args, FILE *_f);
      ^~~~~~~

Possible fixes the build on other systems too -- _doprnt was/is an
exported symbol on old Unix/BSD systems too.

bfd/ChangeLog:
2017-10-11  Pedro Alves  <palves@redhat.com>

* bfd.c (_doprnt): Rename to ...
(_bfd_doprnt): ... this.
(error_handler_internal): Adjust.

Display more information when decoding DW_AT_endianity, DW_AT_decimal_sign, DW_AT_defaulted and DW_AT_discr_list DWARF attributes.

* dwarf.c (read_and_display_attr_value): Handle DW_AT_endianity,
DW_END_default, DW_END_big, DW_END_little, DW_ATE_UCS,
DW_ATE_ASCII, DW_CC_pass_by_reference, DW_CC_pass_by_value,
DW_CC_GNU_renesas_sh, DW_CC_GNU_borland_fastcall_i386,
DW_AT_decimal_sign, DW_AT_defaulted, DW_AT_discr_list.
(get_TAG_name): Report user generated tag values.
* testsuite/binutils-all/dwarf-attributes.S: New test.
* testsuite/binutils-all/dwarf-attributes.W. Expected output from
readelf.
* testsuite/binutils-all/readelf.exp: Run the new test.

Remove unnecessary parentheses in declarations

GCC commit a94975e57 ("C++ warning on vexing parse") introduces new
warnings "unnecessary parentheses in the declaration of ...".  These
cause the build of binutils and gdb to fail.  This patch removes those
parentheses for a successful build.

gdb/ChangeLog:
2017-10-11  Egeyar Bagcioglu  <egeyar.bagcioglu@oracle.com>

* macrotab.h (macro_lookup_inclusion): Remove unnecessary
parentheses in the declaration.
(macro_lookup_inclusion): Likewise.
(macro_lookup_definition): Likewise.
* p-lang.h (pascal_builtin_types): Likewise.
* tui/tui-data.c (tui_win_list): Likewise.
* tui/tui-data.h (tui_win_list): Likewise.
* utils.h (make_cleanup_free_section_addr_info): Likewise.

Flash memory size not aligned to address

(This patch is from Mark Rages <markrages@gmail.com>.)

The Nordic nRF52 memory map, reported from black magic probe:

Num Enb Low Addr High Addr Attrs
0 y 0x00000000 0x00080000 flash blocksize 0x1000 nocache
1 y 0x10001000 0x10001210 flash blocksize 0x210 nocache
2 y 0x20000000 0x20010000 rw nocache

The region at 0x10001000 is "UICR" and it is a section of flash that is
erased all at once.

Notice the odd size: 0x210 is the size of the region defined in the
datasheet.

But because the block size was listed as 0x210, gdb was insisting on
issuing two erase commands divisible by 0x210, starting below 0x10001000.

This patch fixes it by doing the alignment computation from the start of
the region, not from address 0.

gdb/ChangeLog:

* target-memory.c (block_boundaries): Fix for block address not
aligned on block size.

ld internationalization fixes

* emultempl/aarch64elf.em: Wrap einfo strings in _().  Formatting.
* emultempl/aix.em: Likewise.
* emultempl/armcoff.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/avrelf.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/cr16elf.em: Likewise.
* emultempl/elf-generic.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/genelf.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/lnk960.em: Likewise.
* emultempl/m68hc1xelf.em: Likewise.
* emultempl/m68kcoff.em: Likewise.
* emultempl/m68kelf.em: Likewise.
* emultempl/metagelf.em: Likewise.
* emultempl/mipself.em: Likewise.
* emultempl/mmix-elfnmmo.em: Likewise.
* emultempl/mmo.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/nds32elf.em: Likewise.
* emultempl/nios2elf.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/riscvelf.em: Likewise.
* emultempl/s390.em: Likewise.
* emultempl/scoreelf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/sunos.em: Likewise.
* emultempl/tic6xdsbt.em: Likewise.
* emultempl/v850elf.em: Likewise.
* emultempl/vms.em: Likewise.
* emultempl/vxworks.em: Likewise.
* ldcref.c: Likewise.
* ldlang.c: Likewise.
* ldlex.l: Likewise.
* ldmain.c: Likewise.
* pe-dll.c: Likewise.
* plugin.c: Likewise.

Automatic date update in version.in

x86: Set GOT refcount to 1

Since x86 check_relocs is called after opening all inputs and garbage
collection, they never see the removed sections.  There is no need
for incrementing GOT refcount.  But since PLT refcount is also used in

  /* Don't create the PLT entry if there are only function pointer
     relocations which can be resolved at run-time.  */
  else if (htab->elf.dynamic_sections_created
           && (h->plt.refcount > eh->func_pointer_refcount
               || eh->plt_got.refcount > 0))
    {

we must increment it.

* elf32-i386.c (elf_i386_check_relocs): Set GOT refcount to 1
instead of incrementing it.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.

get_integer_valueof: Don't output value in test name

The get_integer_valueof outputs the value it has read as part of the
test name.  This causes test names to vary from run to run, and adds
some noise when diffing test results.  e.g.:

-PASS: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: get integer valueof "mypid" (28770)
+PASS: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: get integer valueof "mypid" (32238)

This patch removes that, since it's probably not very useful.

gdb/testsuite/ChangeLog:

* lib/gdb.exp (get_integer_valueof): Don't output read value in test name.

Bump dwarf-mode version number

Bump the dwarf-mode version number, so it can be installed by package.el
users who installed an earlier verision.

2017-10-10  Tom Tromey  <tom@tromey.com>

* dwarf-mode.el: Bump to version 1.4.

Asynchronous insertion for dwarf-mode.el

I was recently examining a very large .debug file.  I tried to use
dwarf-mode, but it blocked Emacs for a very long time while reading
output.

This patch changes dwarf-mode to run the objdump process asynchronously.
This way, I can still do other things in Emacs while waiting for the
dumping to finish.

2017-10-10  Tom Tromey  <tom@tromey.com>

* dwarf-mode.el (dwarf--process, dwarf--deletion-region): New
defvar.
(dwarf--check-running, dwarf--sentinel, dwarf--invoke)
(dwarf--filter): New functions.
(dwarf-do-insert-substructure, dwarf-do-refresh): Call
dwarf--check-running, dwarf--invoke.
(dwarf-browse): Initialize new variables.

Set lexical-binding in dwarf-mode

Emacs has had lexical binding for a while, and it's a good practice to
use it; so enable it in dwarf-mode.el.

2017-10-10  Tom Tromey  <tom@tromey.com>

* dwarf-mode.el: Set lexical-binding.

Bind keys in dwarf-mode-map definition

It's bad Emacs style to define keys from a top-level form.  Instead, one
should define a mode map separately and binding keys in the definition.
This lets users completely override the map by defining it before
loading the mode.

2017-10-10  Tom Tromey  <tom@tromey.com>

* dwarf-mode.el (dwarf-mode-map): New defvar.

Eliminate catch_exceptions/catch_exceptions_with_msg

This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays.  This results in a good number of simplifications.

(I checked that Insight doesn't use those functions.)

The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.

I.e., before:
 -thread-select 123456789
 &"Thread ID 123456789 not known.\n"
 ^error,msg="Thread ID 123456789 not known."
 (gdb)

After:
 -thread-select 123456789
 ^error,msg="Thread ID 123456789 not known."
 (gdb)

gdb/ChangeLog
2017-10-10  Pedro Alves <palves@redhat.com>
    Tom Tromey  <tom@tromey.com>

* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here.  Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type.  Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.

gdb/testsuite/ChangeLog
2017-10-10  Pedro Alves <palves@redhat.com>

* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.

Eliminate catch_errors

If you want to use catch_errors with a function with parameters, then
currently you have to manually write a "capture" struct wrapping the
arguments and marshall/unmarshall that.

https://sourceware.org/ml/gdb-patches/2017-09/msg00834.html proposed
adjusting catch_errors to use gdb::function_view, which would allow
passing lambdas with automatic captures.  However, it seems like using
TRY/CATCH directly instead ends up producing clearer and easier to
debug code.  This is what this commit does.

Note that removing catch_errors exposes further cleanup opportunities
around no longer having to follow catch_errors callback type, and also
removes a few cleanups.

I didn't do anything to save/restore current_uiout because I think
that should be the responsibility of the code that changes
current_uiout in the first place.

(Another approach could be to make catch_errors a variadic template
like:

  template<typename Function, typename... Args>
  int catch_errors (const char *errstring, return_mask mask,
    Function &&func, Args... args);

and then with:

  extern void function_with_args (int, int);
  extern void function_with_no_args ();

calls to the above functions would be wrapped like this:

  catch_errors ("some error happened", RETURN_MASK_ERROR,
                function_with_args, arg1, arg2);

  catch_errors ("some error happened", RETURN_MASK_ERROR,
                function_with_no_args);

but I'm thinking that that doesn't improve much if at all either.)

gdb/ChangeLog
2017-10-10  Pedro Alves  <palves@redhat.com>
    Tom Tromey  <tom@tromey.com>

* breakpoint.c (breakpoint_cond_eval): Change return type to bool
and reverse logic.
(WP_DELETED, WP_VALUE_CHANGED, WP_VALUE_NOT_CHANGED, WP_IGNORE):
No longer macros.  Instead ...
(enum wp_check_result): They're now values of this new
enumeration.
(watchpoint_check): Change return type to wp_check_result and
parameter type to bpstat.
(bpstat_check_watchpoint): Use TRY/CATCH instead of catch_errors.
(bpstat_check_breakpoint_conditions): Use TRY/CATCH instead of
catch_errors.  Reverse logic of watchpoint_check call.
(breakpoint_re_set_one): Now returns void and takes a breakpoint
pointer as parameter.
(breakpoint_re_set): Use TRY/CATCH instead of catch_errors.
* common/common-exceptions.c (throw_exception_sjlj): Update
comments to avoid mentioning catch_errors.
* exceptions.c (catch_errors): Delete.
* exceptions.h: Update comments to avoid mentioning catch_errors.
(catch_errors_ftype, catch_errors): Delete.
* infrun.c (normal_stop): Use TRY/CATCH instead of catch_errors.
(hook_stop_stub): Delete.
(restore_selected_frame): Change return type to void, and
parameter type to const frame_id &.
(restore_infcall_control_state): Use TRY/CATCH instead of
catch_errors.
* main.c (captured_command_loop): Return void and remove
parameter.  Remove references to catch_errors.
(captured_main): Use TRY/CATCH instead of catch_errors.
* objc-lang.c (objc_submethod_helper_data)
(find_objc_msgcall_submethod_helper): Delete.
(find_objc_msgcall_submethod): Use TRY/CATCH instead of
catch_errors.
* record-full.c (record_full_message): Return void.
(record_full_message_args, record_full_message_wrapper): Delete.
(record_full_message_wrapper_safe): Return bool and use TRY/CATCH
instead of catch_errors.
* solib-aix.c (solib_aix_open_symbol_file_object): Change
parameter type to int.
* solib-darwin.c (open_symbol_file_object): Ditto.
* solib-dsbt.c (open_symbol_file_object): Ditto.
* solib-frv.c (open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* solib-target.c (solib_target_open_symbol_file_object): Ditto.
* solib.c (update_solib_list): Use TRY/CATCH instead of
catch_errors.
* solist.h (struct target_so_ops) <open_symbol_file_object>:
Change type.
* symmisc.c (struct print_symbol_args): Remove.
(dump_symtab_1): Use TRY/CATCH instead of catch_errors.
(print_symbol): Change type.
* windows-nat.c (handle_load_dll, handle_unload_dll): Return void
and remove parameters.
(catch_errors): New.
(get_windows_debug_event): Adjust.

gdb/testsuite/ChangeLog:
2017-10-10  Pedro Alves  <palves@redhat.com>

* lib/selftest-support.exp (selftest_setup): Update for
captured_command_loop's prototype change.

[ARM] PR ld/21402, only override the symbol dynamic decision on undefined weak symbol.

Similar as aarch64 backend, arm backend only overrides the decision on undefined
weak symbols. arm backend part already emits necessary relative relocation for
this case.

bfd/

PR ld/21402
* elf32-arm.c (allocate_dynrelocs_for_symbol): Only make undefined weak
symbols into dynamic.

ld/

PR ld/21402
* testsuite/ld-arm/tls-app.d: Update address.
* testsuite/ld-arm/tls-app.r: Remove relocations.
* testsuite/ld-arm/unresolved-1-dyn.d: Update.

Improve the speed of the --dwarf-start option by skipping processing of any comp unit that ends before the specified start address.

PR 22249
* dwarf.c (process_debug_info): Skip any comp unit that ends
before dwarf_start_die.