Nick Roberts [Tue, 14 Feb 2006 09:20:07 +0000 (09:20 +0000)]
Use more functions from gdb-ui.el.
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui
Bob Wilson [Tue, 14 Feb 2006 00:58:05 +0000 (00:58 +0000)]
* config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
from 1, not 0, in error messages.
(md_assemble): Simplify special-case check for ENTRY instructions.
(tinsn_has_invalid_symbolic_operands): Do not include opcode and
operand in error message.
Fred Fish [Mon, 13 Feb 2006 10:41:26 +0000 (10:41 +0000)]
Reviewed and approved by Jim Blandy
2006-02-12 Fred Fish <fnf@specifix.com>
* gdb.base/scope.exp (test_at_main): Use gdb_test_multiple
to handle cases where it takes two "next" commands to skip
past the init call.
* NEWS: Mention native Windows support.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
* Makefile.in (mingw-hdep.o, posix-hdep.o): New dependencies.
(ALLDEPFILES): Add mingw-hdep.c and posix-hdep.c.
* configure.ac: Add gdb_host_obs to CONFIG_OBS. Set gdb_host_obs
to posix-hdep.o by default.
* configure: Regenerated.
* configure.host: Document gdb_host_obs. Add an entry for
i[34567]86-*-mingw32*.
* mingw-hdep.c, posix-hdep.c: New files.
* utils.c (safe_strerror): Remove, moved to posix-hdep.o.
Joel Brobecker [Fri, 10 Feb 2006 20:56:15 +0000 (20:56 +0000)]
* defs.h (gdb_osabi): New enum value GDB_OSABI_AIX.
* osabi.c (gdb_osabi_name): Add name of new value GDB_OSABI_AIX.
* rs6000-tdep.h: New file.
* rs6000-tdep.c: Include "rs6000-tdep.h".
(rs6000_gdbarch_init): Remove enabling of software single step.
Will be done in the AIX-specific initialization routine.
* rs6000-aix-tdep.c: New file.
* config/powerpc/aix.mt (TDEPFILES): Add rs6000-aix-tdep.o.
* Makefile.in (rs6000_tdep_h): New variable.
(rs6000-tdep.o): Update dependencies.
(rs6000-aix-tdep.o): New rule.
Nick Roberts [Fri, 10 Feb 2006 03:54:33 +0000 (03:54 +0000)]
(GDB/MI Breakpoint Table Commands): Add fullname and
times fields where needed. Fix typos. Update general form given
for output of -break-insert.
(GDB/MI): Abbreviate some unnecessarily long fullnames.
* dwarf2read.c (struct dwarf2_per_cu_data): Reduce length to
30 bits. Add load_all_dies flag.
(load_partial_dies): Load all DIEs if per_cu->load_all_dies is set.
Load DW_TAG_member by default. Remove internal_error call.
(find_partial_die): Reload the compilation unit if we can not find
a DIE in the cache. Call internal_error here if we still can not
find the DIE.
Wu Zhou [Wed, 8 Feb 2006 05:41:06 +0000 (05:41 +0000)]
* ppc-linux-nat.c (PTRACE_GET_DEBUGREG, PTRACE_SET_DEBUGREG,
PTRACE_GETSIGINFO): Define.
(last_stopped_data_address): New.
(ppc_linux_check_watch_resources): New function.
(ppc_linux_region_ok_for_hw_watchpoint): New function.
(ppc_linux_insert_watchpoint): New function.
(ppc_linux_remove_watchpoint): New function.
(ppc_linux_stopped_data_address): New function.
(ppc_linux_stopped_by_watchpoint): New function.
(_initialize_ppc_linux_nat): Set the above hardware watchpoint
related target vectors.
* rs6000-tdep.c (rs6000_gdbarch_init): Set PPC architectures
to have nonsteppable watchpoint.
* target.c (default_region_ok_for_hw_watchpoint,
debug_to_region_ok_for_hw_watchpoint): New prototypes.
(update_current_target): Inherit to_region_ok_for_hw_watchpoint
and set default to_region_ok_for_hw_watchpoint.
(default_region_ok_for_hw_watchpoint): New function.
(debug_to_region_ok_for_hw_watchpoint): New function.
(setup_target_debug): Set to_region_ok_for_hw_watchpoint of
debug_target.
* target.h (struct target_ops): Add a new target vector
to_region_ok_for_hw_watchpoint.
(TARGET_REGION_OK_FOR_HW_WATCHPOINT): Define this if it is not
defined anyplace else.
* MAINTAINERS: Update file based on maintainers survey. Add
a note to Past Maintainers. Move unresponsive or inactive
maintainers to Authorized Committers or Past Maintainers as
appropriate. Correct Jim Kingdon's email address. Remove
vacant areas of responsibility.
Paul Brook [Tue, 7 Feb 2006 03:50:20 +0000 (03:50 +0000)]
2006-02-07 Paul Brook <paul@codesourcery.com>
ld/
* emultempl/armelf.em: Include elf/arm.h.
(arm_elf_finish): Set low address bit if enty point is a Thumb
function.
ld/testsuite/
* ld-arm/arm-elf.exp: Add thumb-entry test.
* ld-arm/thumb-entry.d: New test.
* ld-arm/thumb-entry.s: New test.
From Vladimir Prus <ghost@cs.msu.su>:
gdb/
* breakpoint.c (print_one_breakpoint): For MI-like UI, output
fullname field.
gdb/doc/
* gdb.texinfo (Breakpoint table commands): Document the fullname
field in -break-list output.
gdb/testsuite/
* gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Test for the fullname
field.
bfd/
* elfxx-mips.c (mips_elf_initialize_tls_index): If a TLS symbol
has already been assigned a GOT index, copy that index to the
current hash table entry.
ld/testsuite/
* ld-mips-elf/tls-hidden2a.s, ld-mips-elf/tls-hidden2b.s,
* ld/testsuite/ld-mips-elf/tls-hidden2.d,
* ld/testsuite/ld-mips-elf/tls-hidden2-got.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
Mark Kettenis [Thu, 2 Feb 2006 22:15:01 +0000 (22:15 +0000)]
* solib-svr4.h (struct link_map_offsets): Remove r_debug_size and
r_map_size members. Add r_version_offset, r_version_size and
r_ldsomap_offset members.
* solib-svr4.c (solib_svr4_r_map): Renamed from
fetch_link_map_member. Simplify using read_memory_typed_address.
(solib_svr4_r_ldsomap): New function.
(open_symbol_file_object): Use solib_svr_r_map.
(svr4_current_sos): Use solib_svr4_r_map and look for the dynamic
linker by using solib_svr4_r_ldsomap.
(svr4_ilp32_fetch_link_map_offsets)
(svr4_lp64_fetch_link_map_offsets): Adjust for changes to `struct
link_map_offsets'.
* solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Adjust for
changes to `struct link_map_offsets'.
* mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets)
(mipsnbsd_lp64_fetch_link_map_offsets): Adjust for changes to
`struct link_map_offsets'.
* printcmd.c (printf_command): Make format string checking
stricter. Add separate cases for long_arg, ptr_arg, and
long_double_arg.
* utils.c (xstrvprintf): Improve the error message issued
for a bad format string.
* Makefile.in (GDB_WARN_CFLAGS_NO_FORMAT, INTERNAL_CFLAGS_BASE):
New variables.
(gnu-v3-abi.o, monitor.o, procfs.o, linux-thread-db.o): Remove
$(NO_WERROR_CFLAGS).
(printcmd.o): Likewise. Use $(GDB_WARN_CFLAGS_NO_FORMAT) and
enable -Werror.
gdb/
* Makefile.in (gdbtypes_h, gdbtypes.o, utils.o): Update.
* defs.h (hashtab_obstack_allocate, dummy_obstack_deallocate): Add
prototypes.
* dwarf2read.c (read_subroutine_type): Use TYPE_ZALLOC.
(hashtab_obstack_allocate, dummy_obstack_deallocate): Moved to...
* utils.c (hashtab_obstack_allocate, dummy_obstack_deallocate):
...here.
* gdbtypes.c: Include "hashtab.h".
(build_gdbtypes): Remove extra prototype.
(struct type_pair, type_pair_hash, type_pair_eq)
(create_copied_types_hash, copy_type_recursive): New.
* gdbtypes.h: Include "hashtab.h".
(TYPE_ZALLOC): New.
(create_copied_types_hash, copy_type_recursive): New prototypes.
* objfiles.c (free_objfile): Call preserve_values.
* symfile.c (reread_symbols): Likewise.
(clear_symtab_users): Remove calls to clear_value_history and
clear_internalvars.
* value.c (clear_value_history, clear_internalvars): Removed.
(preserve_one_value, preserve_values): New functions.
* value.h (clear_value_history, clear_internalvars): Removed.
(preserve_values): New prototype.
* tracepoint.c (_initialize_tracepoint): Do not initialize convenience
variables here.
gdb/doc/
* gdb.texinfo (Files): Remove obsolete bits from the description
of "symbol-file".
Danny Smith [Wed, 1 Feb 2006 21:28:29 +0000 (21:28 +0000)]
* deffilep.y (def_image_name): If the image name does not have
a suffix, append the default.
* ld.texinfo: Document NAME, LIBRARY usage in PE-COFF .def files.
projects / deliverable / binutils-gdb.git / log
