Jakub Jelinek [Mon, 22 Dec 2003 10:49:59 +0000 (10:49 +0000)]
* objdump.c (disassemble_bytes): Subtract rel_offset from printed
reloc address.
(disassemble_section): Set rel_offset to section->vma instead of
pinfo->buffer_vma.
Jim Blandy [Mon, 22 Dec 2003 03:43:19 +0000 (03:43 +0000)]
* breakpoint.c (bpstat_do_actions): To ensure that
clear_proceed_status doesn't free the command tree we're
evaluating out from under us, zero the bpstat's pointer to it, and
take care of freeing it ourselves.
* cli/cli-script.c (make_cleanup_free_command_lines): Make this
function externally visible.
* cli/cli-script.h (make_cleanup_free_command_lines): New
declaration.
Kevin Buettner [Fri, 19 Dec 2003 00:34:26 +0000 (00:34 +0000)]
* frv-tdep.c (skip_prologue_using_sal): New function. Taken verbatim
from mips-tdep.c.
(frv_analyze_prologue): Rework to account for intermixed prologue /
body instructions.
Nick Clifton [Thu, 18 Dec 2003 18:03:08 +0000 (18:03 +0000)]
(input_file_open): Remove call to stat(). Add a check for getc() failing, and
catch the case where the failure is due to an attempt to read a directory.
* ld-mips-elf/reloc-1[ab].s: New source files.
* ld-mips-elf/reloc-1-{n32,n64,rel}.d: New tests.
* ld-mips-elf/reloc-2[ab].s: New source files.
* ld-mips-elf/reloc-2.{d,ld}: New test.
* ld-mips-elf/reloc-3[ab].s: New source files.
* ld-mips-elf/reloc-3-{r,srec}.d: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
bfd/
* elf32-mips.c (elf_mips_howto_table_rel): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc. Use
_bfd_mips_elf_hi16_reloc for R_MIPS_HI16 and R_MIPS_GNU_REL_HI16,
_bfd_mips_elf_lo16_reloc for R_MIPS_LO16 and R_MIPS_GNU_REL_LO16,
and _bfd_mips_elf_got16_reloc for R_MIPS_GOT16. Change rightshift
to 16 for R_MIPS_HI16 and R_MIPS_GNU_REL_HI16.
(mips_elf_generic_reloc, struct mips_hi16, mips_elf_hi16_reloc)
(mips_elf_lo16_reloc, mips_elf_got16_reloc): Delete.
(_bfd_mips_elf32_gprel16_reloc): Remove special case.
(mips_elf_gprel32_reloc, mips32_64bit_reloc): Likewise.
* elf64-mips.c (mips_elf64_howto_table_rel): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc. Use
_bfd_mips_elf_hi16_reloc for R_MIPS_HI16, _bfd_mips_elf_lo16_reloc
for R_MIPS_LO16 and _bfd_mips_elf_got16_reloc for R_MIPS_GOT16.
Change R_MIPS_HI16's rightshift to 16.
(mips_elf64_howto_table_rela): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc.
Use _bfd_mips_elf_generic_reloc for R_MIPS_GOT16 as well.
(mips_elf64_hi16_reloc, mips_elf64_got16_reloc): Delete.
(mips_elf64_shift6_reloc): Remove special case. Use
_bfd_mips_elf_generic_reloc instead of returning bfd_reloc_continue.
* elfn32-mips.c (prev_reloc_section): Delete.
(prev_reloc_address, prev_reloc_addend): Delete.
(elf_mips_howto_table_rel, elf_mips_howto_table_rela): As for
elf64-mips.c
(GET_RELOC_ADDEND, SET_RELOC_ADDEND): Delete.
(mips_elf_generic_reloc, struct mips_hi16, mips_elf_hi16_reloc)
(mips_elf_lo16_reloc, mips_elf_got16_reloc): Delete.
(mips_elf_gprel16_reloc): Delete use of GET_RELOC_ADDEND.
(mips_elf_literal_reloc, mips_elf_gprel32_reloc): Likewise.
(mips16_jump_reloc, mips16_gprel_reloc): Likewise.
(mips_elf_shift6_reloc): Likewise. Delete use of SET_RELOC_ADDEND.
* elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Use
_bfd_relocate_contents to install an in-place addend.
(mips_hi16): New structure.
(mips_hi16_list): Moved from elf32-mips.c.
(_bfd_mips_elf_hi16_reloc, _bfd_mips_elf_got16_reloc): New functions.
(_bfd_mips_elf_lo16_reloc, _bfd_mips_elf_generic_reloc): New functions.
(mips_elf_calculate_relocation): Assume addend is unshifted.
(_bfd_mips_elf_relocate_section): Don't apply the howto rightshift
on top of the usual high-part shift. Don't shift the addend right
before calling mips_elf_calculate_relocation.
gas/
* config/tc-mips.c (mips_need_elf_addend_fixup): Delete.
(md_apply_fix3): Remove bfd_install_relocation workarounds.
(tc_gen_reloc): Likewise. Factor handling of pc-relative relocations
and treat fx_addnumber as relative to the relocation address.
gas/testsuite/
* gas/mips/mips16-jalx.d: Use -mabi=o64.
* gas/mips/mips16.d: Likewise.
* gas/mips/elf-rel17.[sd]: New test.
* gas/mips/mips.exp: Run it.
Jeff Johnston [Wed, 17 Dec 2003 21:47:47 +0000 (21:47 +0000)]
2003-12-17 Jeff Johnston <jjohnstn@redhat.com>
* linespec.h (decode_line_1): Add new not_found_ptr parameter.
* linespec.c (decode_line_1): Add new parameter. Pass on
new parameter to decode_variable and symtab_from_filename
functions.
(decode_variable): Add new not_found_ptr parameter. Throw exception
rather than failing if the not_found_ptr is non-null and the
function is not found.
(symtab_from_filename): Add new not_found_ptr parametr. Throw
exception rather than failing if the not_found_ptr is non-null and
the source file is not found.
* breakpoint.c: Change all callers of decode_line_1 to add default
extra parameter for decode_line_1 calls.
* tracepoint.c: Ditto.
* cli/cli-cmds.c: Ditto.
Michael Chastain [Wed, 17 Dec 2003 20:13:54 +0000 (20:13 +0000)]
2003-12-11 Michael Chastain <mec.gnu@mindspring.com>
* rlmbutil.h: Require HAVE_MBSTATE_T for HANDLE_MULTIBYTE.
Revert requirement of HAVE_MBRTOWC. Delete macro definitions
that attempted to fake mbstate_t if HAVE_MBSRTOCWS is defined
and HAVE_MBSTATE_T is not defined.
* config/tc-z8k.c (struct z8k_exp): Remove, not used anywhere.
(ctrl_table): Add "flags" keyword and some comments.
(flag_table): Convert to uppercase.
(get_flags_operand): Be case insensitive.
(get_interrupt_operand): Be case insensitive. Support notation
where the inperrupt arguments are separated by commas.
(get_operands): Check whether get_flags_operand consumed all
arguments. Return failure if get_ctrl_operand didn't recognize a
valid control register.
(get_specific): Add case CLASS_CTRL: Test for valid control
register for ldctlb opcode.
(build_bytes): Check for valid control registers.
* mmix-opc.c (mmix_opcodes): Use GO_INSN_BYTE, PUSHGO_INSN_BYTE,
SETL_INSN_BYTE, INCH_INSN_BYTE, INCMH_INSN_BYTE, INCML_INSN_BYTE
and SWYM_INSN_BYTE instead of raw numbers.
Alan Modra [Sat, 13 Dec 2003 08:23:05 +0000 (08:23 +0000)]
* read.c: Remove unneeded prototypes.
(s_comm): Split out code to..
(s_comm_internal): ..here. Tidy error returns. Rearrange so that
"name" from input line may be used in more places. Merge code
testing for valid size from elf_common. Merge code from
s_lcomm_internal. Call comm_parse_extra.
(bss_alloc): New function, split out of s_lcomm_internal and
elf_common.
(parse_align): Likewise.
(s_lcomm_internal): Rewrite.
(s_lcomm, s_lcomm_bytes): Use s_comm_internal.
* read.h (bss_alloc, parse_align, s_comm_internal): Declare.
* config/obj-elf.c (elf_common): Split out code to..
(elf_common_parse): ..here. Remove code common to s_comm_internal,
parse_align and bss_alloc. Rearrange and Tidy.
* config/tc-alpha.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Define.
Kevin Buettner [Sat, 13 Dec 2003 03:51:56 +0000 (03:51 +0000)]
From David Mosberger <davidm@hpl.hp.com>:
* libunwind-frame.c (unw_find_dyn_list_p): Replace most arguments
with a single unw_dyn_info_t pointer.
(libunwind_find_dyn_list): Likewise.
* libunwind-frame.h: Likewise.
* ia64-tdep.c (ia64_find_unwind_table): Switch to using
UNW_INFO_FORMAT_REMOTE_TABLE so we can avoid having to read in the
entire unwind-table at once. Support for this table format has
been added to libunwind v0.95.
(ia64_find_proc_info_x): Adjust for remote-unwind-table changes.
(ia64_get_dyn_info_list): Adjust for interface change for
libunwind_find_dyn_list().
Jeff Johnston [Fri, 12 Dec 2003 19:04:46 +0000 (19:04 +0000)]
2003-12-12 Jeff Johnston <jjohnstn@redhat.com>
* breakpoint.c (breakpoint_enabled): New function to test whether
breakpoint is active and enabled.
(insert_bp_location, insert_breakpoints): Call new function to test
for enabled breakpoint.
(remove_breakpoint, breakpoint_here_p, breakpoint_thread_match)
(bpstat_should_step, bpstat_have_active_hw_watchpoints)
(disable_breakpoints_in_shlibs, hw_watchpoint_used_count)
(disable_watchpoints_before_interactive_call_start)
(breakpoint_re_set_one): Ditto.
(bpstat_stop_status): Use new function and simplify test.
projects / deliverable / binutils-gdb.git / log
