* tuiIO.c (tui_cont_sig): Update cursor position on the screen to
leave it in the command window.
(tui_redisplay_readline): Save cursor position to restore the
cursor after we go back from background.
* tuiData.h (TuiCommandInfo): Add start_line member.
* tuiStack.c (tuiUpdateLocatorFilename): Use const char*.
* tuiStack.h (tuiUpdateLocatorFilename): Update prototype.
* tuiWin.c (_initialize_tuiWin): Don't cast table of enum in calls
to add_set_enum_cmd.
* tui.c (tui_show_source): New function.
(tuiGetLowDisassemblyAddress): Use CORE_ADDR for newLow.
(tui_switch_mode): Prep or deprep readline terminal;
make sure the \n we return does not redo the last command.
* tui.h (tui_show_source): Declare.
(tui_out_new, tui_install_hooks, tui_remove_hooks): Likewise.
(tui_active, tui_initialize_io, tui_initialize_readline): Likewise.
Mark Kettenis [Mon, 23 Jul 2001 19:21:57 +0000 (19:21 +0000)]
* configure.in (AC_CHECK_FUNCS): Add setpggrp.
(AC_FUNC_SETPGRP): Add.
* aclocal.m4, configure, config.in: Regenerated.
* inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
SETPGRP_ARGS. Always use setpgid if it is available, fall back on
setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
distinguish between the two setpgrp flavours.
* config/xm-sysv4.h, config/arm/xm-linux.h,
config/i386/xm-i386aix.h, config/i386/xm-sco.h,
config/i386/xm-linux.h, config/i386/xm-ptx.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
* config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
Eli Zaretskii [Mon, 23 Jul 2001 16:10:24 +0000 (16:10 +0000)]
Add new DJGPP-specific commands and document them in the manual.
Make the function which reads memory regions be more defensive
about buggy DPMI providers.
Alan Modra [Mon, 23 Jul 2001 12:50:22 +0000 (12:50 +0000)]
* config/tc-hppa.c (pa_parse_nonneg_cmpsub_cmpltr): Remove
"isbranch" param as all calls have it set.
(pa_parse_neg_cmpsub_cmpltr): Likewise.
(pa_parse_nonneg_add_cmpltr): Likewise. Remember result of
strcasecmp in "nullify" var.
(pa_parse_neg_add_cmpltr): Likewise.
(pa_ip): Don't "save_s" unnecessarily. Update calls to above
functions. Don't print wrong conditions in error messages.
Alan Modra [Mon, 23 Jul 2001 07:54:04 +0000 (07:54 +0000)]
* ldcref.c (check_section_sym_xref): New function.
(check_nocrossrefs): Call it.
(check_nocrossref): Interate over h->refs here instead of..
(check_refs): ..here. Pass in the symbol name, section, and bfd
rather than hash_entry pointers.
(struct check_refs_info): Keep symbol name rather than hash entry.
Remove "same".
(check_reloc_refs): Tweak for above changes in check_refs_info.
Only report references to section syms when symname is NULL to
prevent duplicate messages for the same reloc.
* Makefile.in (SIM_OBJS): Remove sim-resume.o
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
* tuiIO.c (tui_initialize_io): Install tui_cont_sig signal handler
if SIGCONT is defined.
(tui_cont_sig): New function when SIGCONT is defined.
(tui_setup_io): Save tty setting to restore by SIGCONT.
* utils.c (init_page_info): Use tui_get_command_dimension.
* printcmd.c (disassemble_command): Simplify tui specific code,
use tui_is_window_visible, tui_show_assembly.
* tui.c (tui_change_windows): New function.
(tui_delete_other_windows): New function.
(tui_initialize_readline): Bind them to C-X 1 and C-X 2.
(tui_enable): Enable the keypad; call tui_update_variables.
(strcat_to_buf_with_fmt): Remove.
* tui.h: Remove old declarations, add the new ones.
* tui.c (tui_switch_mode): New function.
(tui_initialize_readline): New function.
(tui_enable): New function.
(tui_disable): New function.
(tuiGetLowDisassemblyAddress): Use CORE_ADDR, cleanup.
(tui_vSelectSourceSymtab): Remove.
(tuiInitWindows): Remove.
(_initialize_tui): Remove.
(_tuiReset): Keep but put arround #if 0.
* tuiIO.h: Remove old declarations and add the new ones.
* tuiIO.c: New management for curses and gdb terminal interactions.
(tui_tputs): Remove.
(tuiTermSetup, tuiTermUnsetup): Remove, must use normal curses ops.
(tuiBufferGetc, tui_vStartNewLines, _updateCommandInfo): Remove.
(tui_owns_terminal): Remove.
(tui_redisplay_readline): New function.
(tui_puts): New function.
(tui_prep_terminal): New function.
(tui_deprep_terminal): New function.
(tui_getc): Rename of tuiGetc, simplify and fix.
(tui_setup_io): New function.
(tui_initialize_io): New function.
* tuiGeneralWin.c (boxWin): Use the tui configuration variables.
* tuiWin.h: Declare the new variables.
* tuiWin.c (_initialize_tuiWin): Create TUI configuration variables.
(tui_update_variables): New function.
(translate): New function.
(tui_border_kind_enums, tui_border_mode_enums): New tables.
(tui_border_mode_translate): New table.
(tui_border_kind_translate_*): New tables.
(tui_active_border_mode): New variables.
(tui_border_*): New variables.
* tuiDisassem.c (tuiSetDisassemContent): Use CORE_ADDR for address.
(tuiShowDisassem): Use TuiLineOrAddress type.
(tuiShowDisassemAndUpdateSource): Likewise.
(tuiVerticalDisassemScroll): Likewise.
(tuiShowDisassemAsIs): Remove.
* tuiDisassem.h (tuiSetDisassemContent): Update prototype.
* tuiData.c (initWinInfo): Use CORE_ADDR for address.
(clearWinDetail): Likewise.
(displayableWinContentOf): Fix address conversion.
(tuiNextWin): Fix crash when the window is not yet created.
(partialWinByName): Likewise.
* tuiDisassem.c (tuiVerticalDisassemScroll): Use CORE_ADDR.
(tuiVerticalDisassemScroll): Likewise.
(tuiShowDisassemAndUpdateSource): Check for null symtab to
prevent a crash.
* gdb.base/remote.c (RANDOM_DATA_SIZE): New define, defaults to 48K
and defined to 1K for m68hc11.
(random_data): Reduce table to 1K for embedded platforms (68hc11).
* gdb.base/remote.exp (get_sizeof): New function from sizeof.exp.
(sizeof_random_data): New variable to tell the size of the data table;
don't test past this size; always run to main.
* tuiRegs.c (tuiDisplayRegistersFrom): Set scrollok to FALSE in
each register window.
(tuiCheckRegisterValues): Use REGISTER_RAW_SIZE to obtain the size
of the register to check.
(_tuiRegValueHasChanged): Likewise.
(_tuiRegisterName): Use REGISTER_NAME.
(tui_restore_gdbout): New function.
(_tuiRegisterFormat): Use do_registers_info with gdb_stdout redirected
to a string.
(START_SPECIAL_REGS): Define.
(_tuiGetRegisterRawValue): Use get_saved_register.
(_tuiDisplayRegister): Fix clearing of register window.
* source.c (find_source_lines): Remove tui test, must be replaced
by appropriate warning hook.
(print_source_lines): Remove tui hacks, must be replaced by cli.
(forward_search_command): Remove tui hacks, can be replaced by
appropriate calls to identify_source_line when tui scrolls.
(reverse_search_command): Likewise.
Nicholas Duffek [Tue, 17 Jul 2001 01:23:44 +0000 (01:23 +0000)]
* remote.c (init_remote_ops, init_remote_cisco_ops,
init_remote_async_ops): Set to_pid_to_str and
to_extra_thread_info correctly and in the same order as declared
in target.h.
DJ Delorie [Tue, 17 Jul 2001 01:19:19 +0000 (01:19 +0000)]
* rcparse.y (styles): use SUBLANG_SHIFT instead of 8 (or the more
correct 10).
* resrc.c (write_rc_resource): Likewise.
* windres.h (SUBLANG_SHIFT): Define - as 10.
Nicholas Duffek [Mon, 16 Jul 2001 23:32:14 +0000 (23:32 +0000)]
* remote.c (init_remote_ops, init_remote_cisco_ops,
init_remote_async_ops): Set to_pid_to_str and
to_extra_thread_info correctly and in the same order as declared
in target.h.
* tuiStack.c: Add missing includes.
(tuiShowFrameInfo): Don't crash when there is no symbol table
associated with the pc.
* tuiSource.c (_hasBreak): Check for null source file.
* tuiWin.c (tuiRefreshAll): Check for null winList[type].
(_tuiSetFocus): Check for null dataWin.
* tuiGeneralWin.c (refreshAll): Check for null list[type].
* tui.h: Cleanup to avoid inclusion of curses includes.
(TuiGenWinInfo, TuiGenWinInfoPtr): Move from here.
* tuiData.h: To here; include curses includes here.
(setTermHeightTo): Rename of setTermHeight to follow reality.
(setTermWidthTo): Likewise with setTermWidth.
* gdb.base/return2.exp: return of long long and double fails for
68HC11; don't execute these tests on that platform.
* gdb.base/return.exp: Return of a double fails for 68hc11.
Eli Zaretskii [Mon, 16 Jul 2001 14:13:06 +0000 (14:13 +0000)]
* cli/cli-cmds.c (shell_escape) [GLOBAL_CURDIR]: Condition the
call to chdir on this symbol rather than on __DJGPP__.
(CANT_FORK) [__MSDOS__]: Move from here...
* defs.h (CANT_FORK) [__MSDOS__]: ...to here.
(GLOBAL_CURDIR) [__MSDOS__]: Define.
Elena Zannoni [Sun, 15 Jul 2001 20:45:32 +0000 (20:45 +0000)]
2001-07-15 Elena Zannoni <ezannoni@redhat.com>
* top.c (quit_cover, float_handler): Move definition up before use.
(gdb_init): Move to end of file, to avoid calls to not yet defined
functions.
Delete prototypes.
projects / deliverable / binutils-gdb.git / log
