* command.h (add_setshow_auto_boolean_cmd): Replace
add_set_auto_boolean_cmd.
* cli/cli-decode.c (add_setshow_auto_boolean_cmd): Replace
add_set_auto_boolean_cmd.
* cli/cli-decode.h (add_set_auto_boolean_cmd): Delete declaration.
* mips-tdep.c (_initialize_mips_tdep): Update ``set mips
mask-address'' command.
(show_mask_address): Add cmd parameter.
* remote.c (add_packet_config_cmd): Update.  Change type of
set_func and show_func to cmd_sfunc_ftype.
(_initialize_remote): Update `set remote Z-packet'
(show_remote_protocol_qSymbol_packet_cmd): Add cmd parameter.
(show_remote_protocol_e_packet_cmd): Ditto.
(show_remote_protocol_E_packet_cmd): Ditto.
(show_remote_protocol_P_packet_cmd): Ditto.
(show_remote_protocol_Z_software_bp_packet_cmd): Ditto.
(show_remote_protocol_Z_hardware_bp_packet_cmd): Ditto.
(show_remote_protocol_Z_write_wp_packet_cmd): Ditto.
(show_remote_protocol_Z_read_wp_packet_cmd): Ditto.
(show_remote_protocol_Z_access_wp_packet_cmd): Ditto.
(show_remote_protocol_Z_packet_cmd): Ditto.
(show_remote_protocol_binary_download_cmd): Ditto.
(show_remote_cmd): Pass NULL to all of above.

* config/i386/tm-i386.h (PUSH_ARGUMENTS, STORE_STRUCT_RETURN,
DEPRECATED_EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE,
DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS, PUSH_DUMMY_FRAME,
POP_FRAME): Remove defines.
(i386_push_arguments, i386_store_struct_return,
i386_extract_return_value, i386_store_return_value,
i386_extract_struct_value_address, i386_push_dummy_frame,
i386_pop_frame): Renove prototypes.
* i386-tdep.c (i386_gdbarch_init): Adjust for removal of the
macros mentioned above.

* cli/cli-decode.c (add_setshow_boolean_cmd): Replace
add_set_boolean_cmd.
(add_setshow_cmd): New function.
* command.h (add_setshow_boolean_cmd): Replace
add_set_boolean_cmd.
* remote-rdi.c (_initialize_remote_rdi): Update ``set rdiheartbeat''
and ``set rdiromatzero''.
* maint.c (_initialize_maint_cmds): Update commented out code.
* cli/cli-decode.h (add_set_boolean_cmd): Delete declaration.
* target.c (initialize_targets): Update `set
trust-readonly-sections'.
* remote.c (_initialize_remote): Update `set remotebreak'.

* config/i386/tm-i386.h (FUNCTION_START_OFFSET, INNER_THAN,
BREAKPOINT, DECR_PC_AFTER_BREAK): Removed.
* i386-tdep.c (i386_skip_prologue): Adjust function signature to
fit into multi-arch framework.
(i386_breakpoint_from_pc): New function.
(i386_gdbarch_init): Adjust for removal of the macros mentioned
above.

* config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION,
FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS,
FRAME_ARGS_SKIP, FRAME_INIT_SAVED_REGS): Remove defines.
(i386_frameless_function_invocation, i386_frame_num_args,
i386_frame_init_saved_regs): Remove prototypes.
* i386-tdep.c (i386_gdbarch_init): Adjust for removal of the
macros mentioned above.

* cli/cli-decode.c (set_cmd_cfunc): Update.
(set_cmd_sfunc): Update.
* command.h (cmd_cfunc_ftype, cmd_sfunc_ftype): Declare.
(set_cmd_sfunc, set_cmd_cfunc): Update.
* cli/cli-decode.h: Update.

* i386-sol2-tdep.c (i386_sol2_osabi_sniffer): New function.
(_initialize_i386_sol2_tdep): Register i386_sol2_osabi_sniffer.

* defs.h (auto_boolean): Declare enum.
* command.h (cmd_auto_boolean): Delete enum.
* mips-tdep.c (mask_address_var): Update.
(mips_mask_address_p): Update.
(show_mask_address): Update.
* remote.c (struct packet_config): Update.
(update_packet_config): Update.
(show_packet_config_cmd): Update.
(packet_ok): Update.
(add_packet_config_cmd): Update.
(_initialize_remote):
* command.h: Update.
* cli/cli-setshow.c (parse_auto_binary_operation): Update.
(do_setshow_command): Update.
* cli/cli-decode.c (add_set_auto_boolean_cmd): Update.
* cli/cli-decode.h: Update.

2002-06-15  H.J. Lu  (hjl@gnu.org)

* nm.c (print_size): New variable. Initialize to 0.
(long_options): Add 'S'/"print-size".
(main): Handle 'S'.
(print_symbol_info_bsd): Print size only if print_size is not
0.

* doc/binutils.texi: Document -S/--print-size.

* config/i386/tm-cygwin.h, config/i386/tm-fbsd.h,
config/i386/tm-go32.h, config/i386/tm-i386gnu.h,
config/i386/tm-i386sol2.h, config/i386/tm-i386v4.h,
config/i386/tm-linux.h, config/i386/tm-nbsd.h,
config/i386/tm-obsd.h (HAVE_I387_REGS): Remove define.
* config/i386/tm-i386.h: Unconditionally define FLOAT_INFO.

* i386-tdep.c (i386_coff_osabi_sniffer): Add "coff-go32" to the
list of DJGPP COFF targets.

Clean up the mess I made from my last checkin.

* config/i386/tm-i386.h (REGISTER_SIZE): Remove define.
(NUM_GREGS, NUM_FREGS, NUM_SSE_REGS): Remove defines.
(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove defines.
(FP0_REGNUM): Remove define.
(MAX_REGISTER_RAW_SIZE, MAX_REGISTER_VIRTUAL_SIZE,
MAX_REGISTER_VIRTUAL_SIZE): Remove define.
(i386_register_virtual_size): Remove protoype.
* i386-tdep.c (i386_register_virtual_size): Removed.
(i386_extract_return_value, i386_store_return_value): Use
FP0_REGNUM instead of NUM_FREGS to determine whether the
floating-point registers are available.
(i386_gdbarch_init): Tweak FIXME about FPU registers.
Adjust for removal of macros mentioned above.

* i386-tdep.c (i386_gdbarch_init): Tewak

* i386v4-nat.c: Include "i386-tdep.h".  Reformat and tweak various
comments.
(fill_gregset, supply_gregset, supply_fpregset, fill_fpregset):
Remove prototypes.
(supply_gregset, fill_gregset): Remove use of register keyword and
remove declaration for regmap.  Use I386_NUM_GREGS instead of
NUM_REGS and NUM_FREGS.
(FPREGSET_FSAVE_OFFSET): Remove.
(supply_fpregset, fill_fpregset): Use FPO_REGNUM instead of
NUM_FREGS to determine whether the floating-point registers are
available.

* i386gnu-nat.c (supply_gregset, gnu_fetch_registers,
gnu_store_registers): Replace usage of NUM_GREGS with
I386_NUM_GREGS.

* i386-linux-nat.c (OLD_CANNOT_FETCH_REGISTER,
OLD_CANNOT_STORE_REGISTER, supply_gregset, fill_gregset): Replace
usage of NUM_GREGS with I386_NUM_GREGS.

* i386-linux-nat.c (fill_gregset): Remove redundant parentheses.

* i386bsd-nat.c: Include "i386-tdep.h".
(supply_gregset, fill_gregset): Replace usage of NUM_GREGS with
I386_NUM_GREGS.

* i386v-nat.c: Remove copnditional inclusion of <asm/debugreg.h>,
and associated comment.  They no longer make any sense, since we
don't use this file anymore on Linux.

* config/i386/tm-i386.h (MAX_NUM_REGS): Removed.
* i386-tdep.c (i386_register_offset, i386_register_size): Use
I386_SSE_NUM_REGS instead of MAX_NUM_REGS for the number of
elements in these arrays.
(_initialize_i386_tdep): Use I386_SSE_NUM_REGS instead of
MAX_NUM_REGS.

* osabi.h (gdb_osabi): Add GDB_OSABI_LYNXOS.
* osabi.c (gdb_osabi_names): Add entry for "LynxOS".

Fix for transfers across segments.

daily update

*** empty log message ***

+ * gdbarch.sh (DEPRECATED_EXTRACT_RETURN_VALUE): Rename
+ EXTRACT_RETURN_VALUE.
+ (DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS): Rename
+ EXTRACT_STRUCT_VALUE_ADDRESS.
+ * gdbarch.h, gdbarch.c: Regenerate.
+
+ * values.c (value_being_returned): Handle
+ DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS.
+ (EXTRACT_RETURN_VALUE): Define as DEPRECATED_EXTRACT_RETURN_VALUE.
+
+ * arm-linux-tdep.c (arm_linux_init_abi): Update.
+ * arm-tdep.c (arm_gdbarch_init): Update.
+ * avr-tdep.c (avr_gdbarch_init): Update.
+ * cris-tdep.c (cris_gdbarch_init): Update.
+ * d10v-tdep.c (d10v_gdbarch_init): Update.
+ * ia64-tdep.c (ia64_gdbarch_init): Update.
+ * m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
+ * rs6000-tdep.c (rs6000_gdbarch_init): Update.
+ * s390-tdep.c (s390_gdbarch_init): Update.
+ * sh-tdep.c (sh_gdbarch_init): Update.
+ * s390-tdep.c (s390_gdbarch_init): Update.
+ * sparc-tdep.c (sparc_gdbarch_init): Update.
+ * ns32k-tdep.c (ns32k_gdbarch_init): Update.
+ * v850-tdep.c (v850_gdbarch_init): Update.
+ * vax-tdep.c (vax_gdbarch_init): Update.
+ * x86-64-tdep.c (x86_64_gdbarch_init): Update.
+ * xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
+
+ * config/arc/tm-arc.h: Update.
+ * config/d30v/tm-d30v.h: Update.
+ * config/fr30/tm-fr30.h: Update.
+ * config/h8300/tm-h8300.h: Update.
* config/h8500/tm-h8500.h: Update.
* config/i386/tm-i386.h: Update.
* config/i386/tm-ptx.h: Update.
* config/i386/tm-symmetry.h: Update.
* config/i960/tm-i960.h: Update.
* config/m32r/tm-m32r.h: Update.
* config/m68k/tm-delta68.h: Update.
* config/m68k/tm-linux.h: Update.
* config/m68k/tm-m68k.h: Update.
* config/m88k/tm-m88k.h: Update.
* config/mcore/tm-mcore.h: Update.
* config/mips/tm-mips.h: Update.
* config/mn10200/tm-mn10200.h: Update.
* config/pa/tm-hppa.h: Update.
* config/pa/tm-hppa64.h: Update.
* config/sparc/tm-sp64.h: Update.
* config/sparc/tm-sparc.h: Update.
* config/sparc/tm-sparclet.h: Update.
* config/z8k/tm-z8k.h: Update.

* Makefile.in (i386_linux_tdep_h): Define.
(i386_tdep_h, i387_tdep_h): Define.
(i386-linux-nat.o): Add $(i386_linux_tdep_h),
$(i386_tdep_h) and $(i387_tdep_h).
* i386-linux-nat.c: Include "i386-linux-tdep.h".

* config/i386/tm-i386.h (START_INFERIOR_TRAPS_EXPECTED): Removed.
Already covered by the default.

* config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT,
TARGET_LONG_DOUBLE_BIT): Remove.  * i386-tdep.c
(i386_gdbarch_init): Initialize long_double_format and long_double
bit.

* config/i386/i386sol2.mt (TDEPFILES): Add i386-sol2-tdep.o and
i386bsd-tdep.o.  Remove solib.o, solib-svr4.o and solib-legacy.o.
Move these to ...
* config/i386/i386sol2.mh: ... here.
* config/i386/tm-i386sol2.h (STAB_REG_TO_REGNUM): Remove define.
(sigtramp_saved_pc, I386V4_SIGTRAMP_SAVED_PC): Don't #undef.
(SIGCONTEXT_PC_OFFSET): Remove define.
(IN_SIGTRAMP): Remove define.
* i386-sol2-tdep.c: New file.

* config/i386/i386nw.mt (TM_FILE): Change to tm-i386.h.
* config/i386/tm-i386nw.h: Removed.

* config/i386/tm-fbsd.h (STAB_REG_TO_REGNUM,
USE_STRUCT_CONVENTION): Remove defines.
(JB_ELEMENT_SIZE, JB_PC, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
(IN_SIGTRAMP): Remove define.
(i386bsd_in_sigtramp): Remove prototype.
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): Turn into a
function.  Update comment accordingly
(SIGTRAMP_START, SIGTRAMP): Adjust definition accordingly.
(FRAME_SAVED_PC): Remove define.
(i386bsd_frame_saved_pc): Remove prototype.
* config/i386/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC,
GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
(IN_SIGTRAMP): Remove define.
(i386bsd_in_sigtramp): Remove prototype.
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): Turn into a
function.  Update comment accordingly
(SIGTRAMP_START, SIGTRAMP): Adjust definition accordingly.
(FRAME_SAVED_PC): Remove define.
(i386bsd_frame_saved_pc): Remove prototype.
* config/i386/tm-nbsdaout.h (i386nbsd_aout_use_struct_convention):
Remove prototype.
(USE_STRUCT_CONVENTION): Remove prototype.
* i386bsd-nat.c (i386bsd_sigcontext_pc_offset): Remove
declaration.
(_initialize_i386bsd_nat): Revise logic to determine some
constants at compile time when compiling a native GDB.  Warn if
things don't match up with what we expect.
* i386bsd-tdep.c (i386bsd_sigtramp_start, i386bsd_sigtramp_end):
Remove variables.
(i386bsd_in_sigtramp): Rename tp i386bsd_pc_in_sigtramp.  Rewrite
to use date stored in `struct gdbarch_tdep'.
(i386bsd_sigcontext_offset): Remove varaible.
(i386bsd_sigtramp_saved_pc): Make public.  Rewrite to use data
stored in `struct gdbarch_tdep'.
(i386bsd_frame_saved_pc): Make static.
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): New functions.
(i386bsd_sc_pc_offset, i386nbsd_sc_pc_offset,
i386fbsd_sigtramp_start, i386fbsd_sigtramp_end,
i386fbsd4_sc_pc_offset): New variables.
(i386bsd_init_abi, i386nbsd_init_abi, i386nbsdelf_init_abi,
i386fbsdaout_init_abi, i386fbsd_init_abi, i386fbsd4_init_abi): New
functions.
(i386bsd_aout_osabi_sniffer, _initialize_i386bsd_tdep): New
functions.
* i386fbsd-nat.c (_initialize_i386fbsd_nat): Fix type in comment.
Modify the value of i386fbsd_sigtramp_start and
i386fbsd_sigtramp_end instead of i386bsd_sigtramp_start and
i386fbsd_sigtramp_end.
* i386nbsd-tdep.c: (i386nbsd_aout_use_struct_convention): Remove
function.

* config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): Move
define to i386-linux-tdep.h.
(NUM_REGS, MAX_NUM_REGS, REGISTER_BYTES, REGISTER_NAME,
REGISTER_BYTE, REGISTER_RAW_SIZE, STAB_REG_TO_REGNUM): Remove
defines.
(i386_linux_register_name, i386_linux_register_byte,
i386_linux_register_raw_size): Remove prototypes.
(i386_linux_svr4_fetch_link_map_offsets): Remove prototype.
(SVR4_FETCH_LINK_MAP_OFFSETS): Remove define.
(IN_SIGTRAMP, FRAME_CHAIN, FRAME_SAVED_PC, SAVED_PC_AFTER_CALL,
TARGET_WRITE_PC): Remove defines.
(i386_linux_in_sigtramp, i386_linux_frame_chain,
i386_linux_frame_saved_pc, i386_linux_saved_pc_after_call,
i386_linux_write_pc): Remove prototypes.
(JB_ELEMENT_SIZE, JB_PC, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
* i386-linux-tdep.h: New file.
* i386-linux-nat.c: Include "i386-linux-tdep.h".
* i386-linux-tdep.c: Include "i386-tdep.h" and
"i386-linux-tdep.h".
(i386_linux_register_name, i386_linux_register_byte,
i386_linux_register_raw_size, i386_linux_in_sigtramp,
i386_linux_write_pc, i386_linux_svr4_fetch_link_map_offsets):
Make static.
(i386_linux_init_abi): New function.
(_initialize_i386_linux_tdep): New function.

* config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Remove define.
(i386_saved_pc_after_call): Remove prototype.
(MAX_NUM_REGS): Increase to deal with Linux's orig_eax "register".
(REGISTER_NAME, STAB_REG_TO_REGNUM, SDB_REG_TO_REGNUM,
DWARF_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM): Remove defines.
(i386_register_name, i386_stab_reg_to_regnum,
i386_dwarf_reg_to_regnum): Remove prototypes.
(SIZEOF_GREGS, SIZEOF_FPU_REGS, SIZEOF_FPU_CTL_REGS,
SIZEOF_SSE_REGS): Remove defines.
(REGISTER_BYTES): Remove define.
(REGISTER_BYTE, REGISTER_RAW_SIZE): Remove defines.
(i386_register_byte, i386_register_raw_size): Remove prototypes.
(FRAME_CHAIN, FRAME_SAVED_PC): Remove defines.
(i386_frame_chain, i386_frame_saved_pc): Remove prototypes.
* config/i386/tm-i386v4.h (FRAME_CHAIN_VALID): Remove define.
(JB_ELEMENT_SIZE, JB_PC, JB_EBX, JB_ESI, JB_EDI, JB_EBP, JB_ESP,
JB_EDX, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
(I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP): Remove defines.
(sigtramp_saved_pc): Remove define.
(i386v4_sigtramp_saved_pc): Remove prototype.
* config/i386/tm-go32.h (FRAME_CHAIN,
FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC): Remove defines.
(i386go32_frame_saved_pc): Remove prototype.
(JB_ELEMENT_SIZE, JB_PC, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
* i386-tdep.h: Include "osabi.h".
(enum i386_abi): Removed.
(enum struct_return): New enum.
(struct gdbarch_tdep): Remove abi member, add osabi, jb_pc_offset,
struct_return, sigtramp_saved_pc, sigtramp_start, sigtramp_end and
sc_pc_offset members.
(i386_gdbarch_register_os_abi): Remove prototype.
(I386_NUM_GREGS, I386_NUM_FREGS, I386_NUM_XREGS,
I386_SSE_NUM_REGS): New defines.
(I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS,
I386_SSE_SIZEOF_REGS): New defines.
(i386_register_name, i386_register_byte, i386_register_raw_size):
New prototypes.
(i386_elf_init_abi, i386_svr4_init_abi): New prototypes.
(i386bsd_sigtramp_saved_pc): New prototype.
* i386-tdep.c: Don't include "elf-bfd.h".
(i386_stab_reg_to_regnum, i386_dwarf_reg_to_regnum,
i386_frame_chain, i386_saved_pc_after_call): Make static.
(i386_frame_saved_pc): Rewrite to call architecture dependent
function to deal with signal handlers.  Make static.
(i386go32_frame_saved_pc): Removed.
[GET_LONGJMP_TARGET] (JB_PC, JB_ELEMENT_SIZE, get_longjmp_target):
Removed.
(i386_get_longjmp_target): New function.
(default_struct_convention, pcc_struct_convention,
reg_struct_convention, valid_conventions, struct_convention): New
variables.
(i386_use_struct_convention): New function.
(i386v4_sigtramp_saved_pc): Renamed to
i386_svr4_sigtramp_saved_pc.  Made static.  Moved.
(i386_pc_in_sigtramp): New function.
(i386_abi_names): Removed.
(ABI_TAG_OS_GNU_LINUX, ABI_TAG_OS_GNU_HURD,
ABI_TAG_OS_GNU_SOLARIS, ABI_TAG_OS_FREEBSD, ABI_TAG_OS_NETBSD):
Removed.
(process_note_sections, i386_elf_abi_from_note, i386_elf_abi,
i386_gdbarch_register_os_abi): Removed.
(struct i386_abi_handler): Removed.
(i386_abi_handler_list): Removed.
(i386_svr4_pc_in_sigtramp, i386_go32_pc_in_sigtramp): New
functions.
(i386_elf_init_abi, i386_svr4_init_abi, i386_go32_init_abi,
i386_nw_init_abi): New functions.
(i386_gdbarch_init): Rewritten to use generic OS ABI framework.
Use set_gdbarch_xxx() calls instead of relying on macros for a
number of calls.
(i386_coff_osabi_sniffer, i386_nlm_osabi_sniffer): New functions.
(_initialize_i386_tdep): Add new 'struct-convcention' command.
Register the various architecture variants defined in this file.

2002-06-14  Chris Demetriou  <cgd@broadcom.com>
            Ed Satterthwaite  <ehs@broadcom.com>

* mips3d.igen: New file which contains MIPS-3D ASE instructions.
* Makefile.in (IGEN_INCLUDE): Add mips3d.igen.
* mips.igen: Include mips3d.igen.
(mips3d): New model name for MIPS-3D ASE instructions.
(CVT.W.fmt): Don't use this instruction for word (source) format
instructions.
* cp1.c (fp_binary_r, fp_add_r, fp_mul_r, fpu_inv1, fpu_inv1_32)
(fpu_inv1_64, fp_recip1, fp_recip2, fpu_inv_sqrt1, fpu_inv_sqrt1_32)
(fpu_inv_sqrt1_64, fp_rsqrt1, fp_rsqrt2): New functions.
(NR_FRAC_GUARD, IMPLICIT_1): New macros.
* sim-main.h (fmt_pw, CompareAbs, AddR, MultiplyR, Recip1, Recip2)
(RSquareRoot1, RSquareRoot2): New macros.
(fp_add_r, fp_mul_r, fp_recip1, fp_recip2, fp_rsqrt1)
(fp_rsqrt2): New functions.
* configure.in: Add MIPS-3D support to mipsisa64 simulator.
* configure: Regenerate.

2002-06-14  Daniel Jacobowitz  <drow@mvista.com>

        * gdbtypes.h (TYPE_FLAG_VARARGS): Update comment.
        (struct main_type): Remove arg_types member.  Update comments for
        struct field.
        (TYPE_ARG_TYPES): Remove.
        (TYPE_FN_FIELD_ARGS): Update.
        (smash_to_method_type): Update prototype.

        * c-typeprint.c (cp_type_print_method_args): Take method type
        instead of argument list.  Use new argument layout.  Simplify.
        (c_type_print_args): Use new argument layout.  Simplify.
        (c_type_print_base): Update call to cp_type_print_method_args.
        * dwarf2read.c (dwarf2_add_member_fn): Remove unneeded type
        argument; use die->type instead.  Update call to
        smash_to_method_type.
        (read_structure_scope): Update call to dwarf2_add_member_fn.
        * gdbtypes.c (allocate_stub_method): Update comment.
        (smash_to_method_type): Take new NARGS and VARARGS arguments.
        Use new argument layout.
        (check_stub_method): Use new argument layout.  Don't count
        void as an argument.
        (print_arg_types): Update comments.  Use new argument layout.
        (recursive_dump_type): Don't print arg_types member.
        * hpread.c (hpread_read_struct_type): Use new argument layout.
        (fixup_class_method_type): Likewise.
        (hpread_type_lookup): Likewise.
        * stabsread.c (read_type): Update calls to read_args and
        smash_to_method_type.
        (read_args): Use new argument layout.  Simplify.
        * valops.c (typecmp): Use new argument layout.  Update parameters
        and comments.  Simplify.
        (hand_function_call): Use new argument layout.
        (search_struct_method): Update call to typecmp.
        (find_overload_match): Use new argument layout.

2002-06-14  H.J. Lu  <hjl@gnu.org>
            Daniel Jacobowitz  <drow@mvista.com>

        * dwarf2dbg.h (dwarf2_directive_file): Return char *.
        * dwarf2dbg.c (dwarf2_directive_file): Return filename.
        * config/tc-mips.c (s_mips_file): Call s_app_file_string
        and new_logical_line for the first .file directive.
        * read.c (s_app_file_string): New function.
        (s_app_file): Call it.
        * read.h (s_app_file_string): Add declaration.

2002-06-14  Daniel Jacobowitz  <drow@mvista.com>

        * configure.in: Remove MIPS_STABS_ELF.
        * configure: Regenerated.
        * config.in: Regenerated.
        * config/obj-elf.h (ECOFF_DEBUGGING): Define to mips_flag_mdebug
        for MIPS targets.
        * config/tc-mips.c (mips_pseudo_table): Remove #ifdef around
        ".extern".
        (pdr_seg): Declare unconditionally.
        (md_begin): Always generate .pdr unless ECOFF_DEBUGGING or not ELF.
        (s_mips_end): Likewise.  Generate stabs function markers.
        (s_mips_ent): Generate stabs function markers.
        (s_mips_frame): Always generate .pdr unless ECOFF_DEBUGGING or not
        ELF.
        (s_mips_mask): Likewise.
        (mips_flag_mdebug): New.
        (md_longopts): Add "mdebug" and "no-mdebug".
        (md_parse_options): Add OPTION_MDEBUG and OPTION_NO_MDEBUG.
        (mips_after_parse_args): Set mips_flag_mdebug.
        * doc/as.texinfo: Add "-mdebug" and "-no-mdebug" for MIPS.

2002-06-14  Daniel Jacobowitz  <drow@mvista.com>

        * gas/mips/lineno.d: Use --gstabs.
        * gas/mips/mips.exp (lineno.s): Remove XFAIL.

Enable 16 byte alignment for .bss, .data and .text sections so that sse and
sse2 code will work.

fix attribution in previous changelog entry

2002-06-13  Chris Demetriou  <cgd@broadcom.com>

* cp1.c (FP_PS_upper, FP_PS_lower, FP_PS_cat, FPQNaN_PS): New macros.
(value_fpr, store_fpr, fp_cmp, fp_unary, fp_binary, fp_mac)
(fp_inv_sqrt, fpu_format_name): Add paired-single support.
(convert): Note that this function is not used for paired-single
format conversions.
(ps_lower, ps_upper, pack_ps, convert_ps): New functions.
* mips.igen (FMT, MOVtf.fmt): Add paired-single support.
(check_fmt_p): Enable paired-single support.
(ALNV.PS, CVT.PS.S, CVT.S.PL, CVT.S.PU, PLL.PS, PLU.PS, PUL.PS)
(PUU.PS): New instructions.
(CVT.S.fmt): Don't use this instruction for paired-single format
destinations.
* sim-main.h (FP_formats): New value 'fmt_ps.'
(ps_lower, ps_upper, pack_ps, convert_ps): New prototypes.
(PSLower, PSUpper, PackPS, ConvertPS): New macros.

*** empty log message ***

daily update

Individual processor configurations for sh-elf / sh-linux:

gcc:
* config.gcc: Add support for sh[234]*-*-elf*, sh[2346lbe]*-*-linux*.
* config/sh/linux.h (TARGET_DEFAULT): Use TARGET_CPU_DEFAULT.
* sh.h (SELECT_SH1, SELECT_SH2, SELECT_SH3, SELECT_SH3E): New macros.
(SELECT_SH4_NOFPU, SELECT_SH4_SINGLE_ONLY, SELECT_SH4): Likewise.
(SELECT_SH4_SINGLE, SELECT_SH5_64, SELECT_SH5_64_NOFPU): Likewise.
(SELECT_SH5_32, SELECT_SH5_32_NOFPU, SELECT_SH5_COMPACT): Likewise.
(SELECT_SH5_COMPACT_NOFPU): Likewise.
(TARGET_SWITCHES): Use them.
(TARGET_CPU_DEFAULT): Define if not already defined.
(TARGET_DEFAULT): Use it.
(LINK_DEFAULT_CPU_EMUL): Value now depends on TARGET_CPU_DEFAULT.
* config/sh/t-linux (MULTILIB_OPTIONS): Use MULTILIB_ENDIAN.
* config/sh/t-monolib: New file.

bfd:
config.bfd: Add support for sh[1234]l*-*-elf* | sh3el*-*-elf*,
sh[1234]*-elf*.

ld:
* configure.tgt: Add support for sh[1234]*le*-*-elf, sh[1234]*-*-elf.

Still outstanding:
config.sub:
* config.sub: Add support for sh[12], sh3e, sh[1234]le, sh3ele,
shle, sh[1234]le, sh3ele, sh64le.

2002-06-13  Daniel Jacobowitz  <drow@mvista.com>

        * NEWS: Mention multithreaded debug support for gdbserver.

2002-06-13  Daniel Jacobowitz  <drow@mvista.com>

        * MAINTAINERS: Mention NEWS.

2002-06-13  Daniel Jacobowitz  <drow@mvista.com>

        * gdbserver/regcache.c: Add comment.

2002-06-13  Daniel Jacobowitz  <drow@mvista.com>

        * mips-tdep.c (PROC_SYMBOL): Add warning comment.
        (struct mips_objfile_private, compare_pdr_entries): New.
        (non_heuristic_proc_desc): Read the ".pdr" section if it
        is present.

Display the symbol's size and use it for sorting.

* config/tc-mips.c (md_apply_fix3): Don't subtract the symbol's
value twice for RELA relocations.

2002-06-12  H.J. Lu <hjl@gnu.org>

* emultempl/elf32.em (gld${EMULATION_NAME}_try_needed): Return
false if xvec doesn't match.

*** empty log message ***

daily update

2002-06-12  Chris Demetriou  <cgd@broadcom.com>

        * mips.igen: Fix formatting of function calls in
        many FP operations.

2002-06-12  Chris Demetriou  <cgd@broadcom.com>

        * mips.igen (MOVN, MOVZ): Trace result.
        (TNEI): Print "tnei" as the opcode name in traces.
        (CEIL.W): Add disassembly string for traces.
        (RSQRT.fmt): Make location of disassembly string consistent
        with other instructions.

2002-06-12  Chris Demetriou  <cgd@broadcom.com>

        * mips.igen (X): Delete unused function.

* arm-tdep.c (arm_push_arguments): Rewrite using a two-pass loop.
(arm_debug): New static variable.
(_initialize_arm_tdep): Add ``set debug arm'' command.

Add the file include/gdb/sim-arm.h defining an enum that specifies the
register numbering used by the GDB<->SIM interface.

2002-06-11  John David Anglin  <dave@hiauly1.hia.nrc.ca>

* ld-scripts/cross1.t: Add .hash, .dynstr and .dynsym sections to
script.

* elflink.h (elf_bfd_final_link): Improve error handling for missing
dynamic sections.

* elf64-hppa.c (allocate_global_data_opd): We don't need an opd entry
for a symbol that has no output section.
(allocate_dynrel_entries): Correct comment.
(elf64_hppa_finalize_dynreloc): Likewise.  Don't create an opd entry
unless we want one.
(elf64_hppa_finalize_opd): Prevent segfault if dyn_h is NULL.
(elf64_hppa_finalize_dlt): Likewise.  Prevent segfault for symbols
with no section.  Remove unnecessary parentheses.

* symbols.c (resolve_symbol_value): Initialise final_val.
* subsegs.c (subsegs_print_statistics): Cast frchp to void *.

Change default csect alignment to 4 bytes.

Add and fix tests to reflect changing text alignment to 4 bytes.

Change text alignement to 4 bytes.

* Makefile.in (CFLAGS_FOR_TARGET): Add -O2.

2002-06-09  Aldy Hernandez  <aldyh@redhat.com>

        * MAINTAINERS: Add self.

missed 2 in 2002.  oops.

002-06-09  Aldy Hernandez  <aldyh@redhat.com>

        * sim-fpu.c (unpack_fpu): Initialize exponent for
        sim_fpu_class_zero.
        (i2fpu): Same.
        (sim_fpu_sqrt): Same.

*** empty log message ***

daily update

* gdb/source.c (source_info): Mention whether the symtab has
information about preprocessor macros.

* gdb/testsuite/lib/gdb.exp (get_debug_format): Tolerate message
saying whether preprocessor macro information is present.

* gdb/doc/gdb.texinfo (Symbols): Update documentation for `info
source' command.

* macscp.exp, macscp1.c, macscp2.h, macscp3.h, macscp4.h: New
tests.

Call the command `info macro', not `show macro'.

* gdb/macrocmd.c (info_macro_command): Renamed from `show_macro_command'.
Fix error message.
(_initialize_macrocmd): Register `info_macro_command' in
`infolist', not `showlist'.

* gdb/doc/gdb.texinfo (Macros): Call the command `info macro', not
`show macro'.

2002-06-11  Daniel Jacobowitz  <drow@mvista.com>

        * mips-tdep.c (MIPS_FPU_TYPE, FP_REGISTER_DOUBLE, MIPS_EABI)
        (MIPS_LAST_FP_ARG_REGNUM, MIPS_LAST_ARG_REGNUM)
        (MIPS_DEFAULT_SAVED_REGSIZE, MIPS_REGS_HAVE_HOME_P)
        (MIPS_DEFAULT_STACK_ARGSIZE, GDB_TARGET_IS_MIPS64)
        (MIPS_DEFAULT_MASK_ADDRESS_P): Remove obsolete definitions.  Define
        unconditionally.
        (set_mipsfpu_single_command, set_mipsfpu_double_command)
        (set_mipsfpu_none_command): Remove if (GDB_MULTI_ARCH).
        (_initialize_mips_tdep): Remove dead code.
        * config/mips/tm-irix5.h (MIPS_LAST_ARG_REGNUM)
        (MIPS_DEFAULT_STACK_ARGSIZE, MIPS_REGS_HAVE_HOME_P): Remove.
        * config/mips/tm-irix6.h (MIPS_LAST_ARG_REGNUM)
        (MIPS_DEFAULT_STACK_ARGSIZE, MIPS_REGS_HAVE_HOME_P): Remove.
        * config/mips/tm-mips.h (MIPS_EABI, MIPS_LAST_ARG_REGNUM,
        MIPS_LAST_FP_ARG_REGNUM): Remove.

2002-06-11  Daniel Jacobowitz  <drow@mvista.com>

* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN.  Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'.  Remove PID member.  Use generic inferior
list header.  All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach.  Use
add_process and add_thread.  Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update.  Use WNOHANG.  Wait for cloned processes also.  Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it.  Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead.  Call supply_register.
(usr_store_inferior_registers): Likewise.  Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it.  Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily.  Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static.  Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads.  Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid.  Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly.  Use
set_desired_inferior.  Support proposed ``Hs'' packet.  Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.

* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field.  Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.

* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc.  Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.

Import latest version of texi2pod.pl from FSF GCC sources.

Revoke adding mh-s390xpic. Doesn't make any sense because it is not
referenced from anywhere.

AJ found the problem and created the patch.

2002-06-11  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * ld-undefined/undefined.exp: Add s390x to dwarf2 xfails.

2002-06-11  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * mh-s390xpic: New file.

* dwarf2cfi.c: Reindented (using 'indent dwarf2cfi.c')

2002-06-11  Michal Ludvig  <mludvig@suse.cz>

* dwarf2cfi.c (unwind_tmp_obstack_init): New.
(unwind_tmp_obstack_free, parse_frame_info)
(update_context, cfi_read_fp, cfi_write_fp)
(cfi_frame_chain, cfi_init_extra_frame_info)
(cfi_virtual_frame_pointer): Use the above function.

* v850-tdep.c (v850_type_is_scalar): New function.
(v850_use_struct_convention): Match current gcc implementation
as close as possible.
(v850_push_arguments): Fix stack_offset handling.  Don't write
struct_addr into register.  This is done by v850_store_struct_return.
(v850_extract_return_value): Care for structs.
(v850_store_return_value): Ditto.
(v850_store_struct_return): Actually write address.

2002-06-11  Michal Ludvig  <mludvig@suse.cz>

* x86-64-tdep.c (x86_64_skip_prologue): Fix to work on functions
without debug information too.

Make print_float_info() multi-arch pure.  Add ui_file and frame parameters.

Force gdbarch.c to be initialized first.

*** empty log message ***

daily update

* infrun.c (struct inferior_status): Replace fields
selected_frame_address and selected_level with field
selected_frame_id.
(save_inferior_status): Update.  Use get_frame_id.
(struct restore_selected_frame_args): Delete.
(restore_selected_frame): Update.  Use frame_find_by_id.
(restore_inferior_status): Update.

* breakpoint.h (struct breakpoint): Change type of
watchpoint_frame to frame_id.
* breakpoint.c (insert_breakpoints): Use frame_find_by_id.  Remove
call to get_current_frame.
(do_enable_breakpoint): Use frame_find_by_id.  Remove call to
get_current_frame.
(watchpoint_check): Use frame_find_by_id.

* frame.h (record_selected_frame): Delete declaration.
* stack.c (record_selected_frame): Delete function.

* frame.h (struct frame_id): Define.
(get_frame_id): Declare.
(frame_find_by_id): Declare.
* frame.c (frame_find_by_id): New function.
(get_frame_id): New function.

ser-e7kpc.c: Fix duplicated define and call of _initialize_ser_e7000pc

* ld-mips-elf/region1a.s,
* ld-mips-elf/region1b.s,
* ld-mips-elf/region1.t,
* ld-mips-elf/region1.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.

* ldlang.c (lang_size_sections_1): Skip removed output sections.

* section.c (_bfd_strip_section_from_output): Set SEC_EXCLUDE
for removed output sections.

Use htab_create_alloc with calloc, not htab_alloc.

*** empty log message ***

daily update

2002-06-09  Daniel Jacobowitz  <drow@mvista.com>

        * signals/signals.c (target_signal_from_host): Fix #ifdef
        SIGRTMIN case.
        (do_target_signal_to_host): Likewise.

2002-06-09  Daniel Jacobowitz  <drow@mvista.com>

        * mips-tdep.c (mips_find_abi_section): New function.
        (mips_gdbarch_init): Call it.

* config/tc-avr.c (mcu_types): Update.

* gdbint.texinfo (Coding): Add section ``Per-architecture module
data''.

* solib-svr4.c (init_fetch_link_map_offsets): Simply return
legacy_fetch_link_map_offsets.  Adjust comment to reflect reality
after Andrew's 2002-06-08 gdbarch change.

* i386-linux-nat.c (suppy_gregset): Don't supply
I386_LINUX_ORIG_EAX_REGNUM if there isn't room for it in GDB's
register cache.
(fill_gregset): Don't fetch it under the same circumstances.

Move include/callback.h and include/remote-sim.h to include/gdb/.
Update accordingly.

* osabi.h (gdb_osabi): Add GDB_OSABI_GO32 and GDB_OSABI_NETWARE.
* osabi.c (gdb_osabi_names): Add "DJGPP" and "NetWare".

2002-06-08  H.J. Lu <hjl@gnu.org>

* elf.c (copy_private_bfd_data): Don't cast to bfd_size_type to
work around a long long bug in gcc 2.96 on mips.