Add procfs_find_LDT_entry declaration (procfs.h).

Add a declaration for procfs_find_LDT_entry in order to prevent
a compiler warning about this function missing one. This also
helps making sure that declaration and definition remain consistent.

gdb/ChangeLog:

        * procfs.h (procfs_find_LDT_entry): Add declaration.
        * sol-thread.c (ps_lgetLDT): Delete local declaration of
        function procfs_find_LDT_entry.

Make procfs.c:proc_get_LDT_entry static

This function is not used outside of procfs.c.

gdb/ChangeLog:

        * procfs.c (proc_get_LDT_entry): Make static.

Fix declaration of proc_find_memory_regions

This function is used as a target_ops callback. The function
implemention was recently changed, but the declaration wasn't
updated accordingly.

This fixes a build failure on Solaris.

gdb/ChangeLog:

        * procfs.c (proc_find_memory_regions): Fix declaration.

    * amd64-tdep.c (amd64_return_value): Revert previous change
        that used TYPE_LENGTH directly.
        * bfin-tdep.c (bfin_extract_return_value): Likewise.
        (bfin_store_return_value): Likewise.
        * cris-tdep.c (cris_store_return_value): Likewise.
        (cris_extract_return_value): Likewise.
        * h8300-tdep.c (h8300_extract_return_value): Likewise.
        * hppa-tdep.c (hppa64_return_value): Likewise.
        * lm32-tdep.c (lm32_store_return_value): Likewise.
        * microblaze-tdep.c (microblaze_store_return_value): Likewise.
        * spu-tdep.c (spu_value_from_register): Likewise.
        * vax-tdep.c (vax_return_value): Likewise.

* gdbtypes.c (lookup_array_range_type): Expand parameters
LOW_BOUND and HIGH_BOUND to LONGEST.
(lookup_string_range_type): Likewise.
* gdbtypes.h (lookup_array_range_type): Likewise.
(lookup_string_range_type): Likewise.
* valops.c (value_cstring): Expand parameter LEN to ssize_t.
Expand HIGHBOUND to ssize_t.
(value_string): Likewise.
* value.h (value_cstring): Expand parameter LEN to ssize_t.
(value_string): Likewise.

daily update

*** empty log message ***

gdb/
PR breakpoints/13898
* breakpoint.h (tracepoint_breakpoint_ops): Forward declaration.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Set breakpoint_ops
per breakpoint type.

* procfs.c: Add gdb_bfd header.
* rs6000-nat.c: Likewise.
* solib-pa64.c: Likewise.
* spu-linux-nat.c: Likewise.
* windows-nat.c: Likewise.

* f-lang.h (BLANK_COMMON_NAME_LOCAL): Remove.

* dwarf2read.c (mark_common_block_symbol_computed): New function.
(read_common_block): Handle child DIEs with
DW_AT_data_member_location.
(new_symbol_full): Add special case for common blocks.
gdb/testsuite
* gdb.dwarf2/dw2-common-block.S: New file.
* gdb.dwarf2/dw2-common-block.exp: New file.

2012-09-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Tom Tromey  <tromey@redhat.com>
* dwarf2read.c (read_common_block): Rewrite.
(new_symbol_full): Handle DW_TAG_common_block.
* f-lang.c (head_common_list, find_common_for_function):
Remove.
* f-lang.h (struct common_entry, struct saved_f77_common,
SAVED_F77_COMMON, SAVED_F77_COMMON_PTR, COMMON_ENTRY,
COMMON_ENTRY_PTR, head_common_list, find_common_for_function,
BLANK_COMMON_NAME_LOCAL): Remove.
(struct common_block): New.
* f-valprint.c (list_all_visible_commons): Remove.
(info_common_command_for_block): New function.
(info_common_command): Use it.
* stack.c (iterate_over_block_locals): Special case for
COMMON_BLOCK_DOMAIN.
* symtab.h (enum domain_enum_tag) <COMMON_BLOCK_DOMAIN>: New
constant.
(struct general_symbol_info) <value.common_block>: New field.
(SYMBOL_VALUE_COMMON_BLOCK): New define.
gdb/testsuite
2012-09-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
* gdb.fortran/common-block.exp: New file.
* gdb.fortran/common-block.f90: New file.

2012-09-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Tom Tromey  <tromey@redhat.com>

* f-lang.c (allocate_saved_bf_node,
allocate_saved_function_node, allocate_saved_f77_common_node,
allocate_common_entry_node, tail_common_list, current_common,
saved_bf_list, saved_bf_list_end, current_head_bf_list,
tmp_bf_ptr, add_common_block, add_common_entry,
find_first_common_named, patch_common_entries,
patch_all_commons_by_name, ADD_BF_SYMNUM, clear_bf_list,
global_remote_debug, get_bf_for_fcn, saved_function_list,
saved_function_list_end, clear_function_list, struct saved_fcn,
struct saved_bf_symnum, SAVED_FUNCTION, SAVED_FUNCTION_PTR,
SAVED_BF, SAVED_BF_PTR): Remove.
* f-lang.h (tail_common_list, current_common,
UNINITIALIZED_SECNUM, COMMON_NEEDS_PATCHING,
BLANK_COMMON_NAME_ORIGINAL, BLANK_COMMON_NAME_MF77,
DEFAULT_UPPER_BOUND, DEFAULT_LOWER_BOUND, real_main_name,
real_main_c_value): Remove.
* f-valprint.c (there_is_a_visible_common_named): Remove.

sourceware.org/ml/gdb-patches/2012-09/msg00403.html

gdb/ChangeLog

        * breakpoint.c (update_global_location_list): Ignore previous
        duplicate status of a breakpoint when starting a new scan for
        duplicate breakpoints.

gdb/testsuite/ChangeLog

        * gdb.base/duplicate-bp.c: New file.
        * gdb.base/duplicate-bp.exp: New file.

Adding PR number tp ChangeLog

Fix changelog format.

* arm-tdep.c (arm_skip_prologue): Extending producer check to support LLVM compiler.

    * amd64-tdep.c (amd64_return_value): Use TYPE_LENGTH directly.
        * bfin-tdep.c (bfin_extract_return_value): Likewise.
        (bfin_store_return_value): Likewise.
        * cris-tdep.c (cris_store_return_value): Likewise.
        (cris_extract_return_value): Likewise.
        * h8300-tdep.c (h8300_extract_return_value): Likewise.
        * hppa-tdep.c (hppa64_return_value): Likewise.
        * lm32-tdep.c (lm32_store_return_value): Likewise.
        * microblaze-tdep.c (microblaze_store_return_value): Likewise.
        * spu-tdep.c (spu_value_from_register): Likewise.
        * vax-tdep.c (vax_return_value): Likewise.

gdb/testsuite:
* gdb.mi/mi2-cli.exp:  Avoid line number in test summary.

Revert:
2012-09-21  Yao Qi  <yao@codesourcery.com>

* gdb.mi/mi2-cli.exp: Remove redundant '\'.

gdb/ChangeLog:

* breakpoint.c (invalidate_bp_value_on_memory_change): Expand
parameter LEN to ssize_t.

gdb/doc/ChangeLog:

observer.texi (memory_changed): Expand parameter LEN to ssize_t.

*** empty log message ***

daily update

Add missing Cpu flags in bd and bt cores

gas/testsuite/

2012-09-25  Saravanan Ekanathan <saravanan.ekanathan@amd.com>

* gas/i386/arch-10-bdver1.d: New file to test bdver1 core.
* gas/i386/x86-64-arch-2-bdver1.d: Likewise.
* gas/i386/i386.exp: Run bdver1 testcases.
* gas/i386/arch-10-bdver2.d: Updated -march flags.
* gas/i386/arch-10-btver1.d: Likewise.
* gas/i386/arch-10-btver2.d: Likewise.
* gas/i386/x86-64-arch-2-bdver2.d: Likewise.
* gas/i386/x86-64-arch-2-btver1.d: Likewise.
* gas/i386/x86-64-arch-2-btver2.d: Likewise.

opcodes/

2012-09-25  Saravanan Ekanathan <saravanan.ekanathan@amd.com>

* gas/i386/arch-10-bdver1.d: New file to test bdver1 core.
* gas/i386/x86-64-arch-2-bdver1.d: Likewise.
* gas/i386/i386.exp: Run bdver1 testcases.
* gas/i386/arch-10-bdver2.d: Updated -march flags.
* gas/i386/arch-10-btver1.d: Likewise.
* gas/i386/arch-10-btver2.d: Likewise.
* gas/i386/x86-64-arch-2-bdver2.d: Likewise.
* gas/i386/x86-64-arch-2-btver1.d: Likewise.
* gas/i386/x86-64-arch-2-btver2.d: Likewise.

* ada-valprint.c (ada_val_print_1): Eliminate single-use
variable LEN.
* alpha-tdep.c (alpha_extract_return_value): Use TYPE_LENGTH
directly.
(alpha_store_return_value): Likewise.
* amd64-tdep.c (amd64_classify_aggregate): Likewise.
(amd64_push_arguments): Likewise.
* ax-gdb.c (gen_trace_static_fields): Likewise.
(gen_traced_pop): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
* findcmd.c (parse_find_args): Use local variable for type
instead of length.
* findvar.c (default_read_var_value): Use TYPE_LENGTH directly.
* h8300-tdep.c (h8300h_extract_return_value): Likewise.
(h8300_store_return_value): Likewise.
* i386-darwin-tdep.c (i386_darwin_push_dummy_call): Likewise.
Use i386_darwin_arg_type_alignment directly.
* infcall.c (call_function_by_hand): Use TYPE_LENGTH directly.
* lm32-tdep.c (lm32_push_dummy_call): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise.
(m68hc11_extract_return_value): Likewise.
* mep-tdep.c (mep_push_dummy_call): Likewise.
* printcmd.c (float_type_from_length): Likewise.
* s390-tdep.c (s390_value_from_register): Likewise.
* stack.c (read_frame_arg): Likewise.
* tracepoint.c (encode_actions_1): Likewise.
* valops.c (value_fetch_lazy): Use local variable for type
instead of length.  Use TYPE_LENGTH directly.
* value.c (value_contents_equal): Use TYPE_LENGTH directly.

Fix typo in skip_prologue_sal's comment.

gdb/ChangeLog:

        * symtab.c (skip_prologue_sal): Fix typo in comment.

Fix ChangeLog entry order (merge error).

Small typo in comment inside create_sals_line_offset

gdb/ChangeLog:

        * linespec.c (create_sals_line_offset): Fix typo in comment.

gdb/ChangeLog:

* c-typeprint.c (c_type_print_varspec_suffix): Remove cast and
use plongest to print the array size.

testsuite/ChangeLog:

* gdb.base/longest-types.c: New test case.
* gdb.base/longest-types.exp: New test case.

* object.h (Sized_relobj_file::adjust_local_symbol,
do_adjust_local_symbol): New functions.
* object.cc (Sized_relobj_file::do_count_local_symbols): Use the above.
* powerpc.cc (Powerpc_relobj::do_adjust_local_symbol): New function.
(Powerpc_relobj::scan_opd_relocs): Warn on unexpected opd relocs
and irregular opd entry spacing.
(Powerpc_relobj::do_read_relocs): Add opd size checks.
(Global_symbol_visitor_opd): New functor.
(Target_powerpc::do_finalize_sections): Omit global symbols defined
on deleted opd entries.

gdb/testsuite:
* gdb.mi/mi2-cli.exp: Check breakpoint notification.

*** empty log message ***

daily update

Forgot to include ChangeLog in last checkin.

2012-09-24  Steve Ellcey  <sellcey@mips.com>

* mips/basic.exp: Add mips*-mti-elf* target.
* configure.ac: Add mips*-mti-elf* target.
* configure: Regenerate.

* m2-typeprint.c (m2_enum): Expand LASTVAL to LONGEST.
* p-valprint.c (pascal_type_print_base): Likewise.

*** empty log message ***

daily update

gas/testsuite/
2012-09-23  Maciej W. Rozycki  <macro@codesourcery.com>

* gas/mips/hilo-diff-eb.d: New test.
* gas/mips/hilo-diff-eb-n32.d: New test.
* gas/mips/hilo-diff-eb-n64.d: New test.
* gas/mips/hilo-diff-el.d: New test.
* gas/mips/hilo-diff-el-n32.d: New test.
* gas/mips/hilo-diff-el-n64.d: New test.
* gas/mips/mips16@hilo-diff-eb.d: New test.
* gas/mips/mips16@hilo-diff-eb-n32.d: New test.
* gas/mips/mips16@hilo-diff-eb-n64.d: New test.
* gas/mips/mips16@hilo-diff-el.d: New test.
* gas/mips/mips16@hilo-diff-el-n32.d: New test.
* gas/mips/mips16@hilo-diff-el-n64.d: New test.
* gas/mips/micromips@hilo-diff-eb.d: New test.
* gas/mips/micromips@hilo-diff-eb-n32.d: New test.
* gas/mips/micromips@hilo-diff-eb-n64.d: New test.
* gas/mips/micromips@hilo-diff-el.d: New test.
* gas/mips/micromips@hilo-diff-el-n32.d: New test.
* gas/mips/micromips@hilo-diff-el-n64.d: New test.
* gas/mips/hilo-diff.s: New test source.
* gas/mips/mips.exp: Run the new tests.

gas/
* config/tc-mips.h (TC_FORCE_RELOCATION): Remove comment.
* config/tc-mips.c (calculate_reloc): New function.
(append_insn): Use it.  Do not resolve compound relocations here.
(mips16_macro_build, mips16_ip): Use calculate_reloc.
(mips16_immed_extend): New function, split out from...
(mips16_immed): ...here.
(mips_frob_file): Handle null symbols.
(mips_force_relocation): Remove NEWABI handling.
(read_reloc_insn, write_reloc_insn): New functions.
(md_apply_fix): Report TLS relocations against constants.
Use read_reloc_insn, calculate_reloc and write_reloc_insn.
Report relocations against constants that can't be resolved
at assembly time.

gas/testsuite/
* gas/mips/elf-rel22.s, gas/mips/elf-rel22.d: Add more tests.
* gas/mips/elf-rel29.s, gas/mips/elf-rel29.d,
gas/mips/micromips@elf-rel29.d, gas/mips/elf-rel30.s,
gas/mips/elf-rel30.l: New tests.
* gas/mips/mips.exp: Run them.

gas/
2012-09-23  Maciej W. Rozycki  <macro@codesourcery.com>

* config/tc-mips.c (append_insn) <BFD_RELOC_MIPS_JMP>: Don't
mark as incomplete for constant expressions.
<BFD_RELOC_MIPS16_JMP>: Likewise.

gas/
2012-09-23  Richard Sandiford  <rdsandiford@googlemail.com>
    Maciej W. Rozycki  <macro@codesourcery.com>

* config/tc-mips.h (mips_record_label): Delete.
(mips_add_dot_label): Declare.
(tc_new_dot_label): Use it.
* config/tc-mips.c (mips_assembling_insn): New variable.
(md_assemble): Call mips_mark_labels.  Set mips_assembling_insn
while the main part of the function is executing.
(mips_compressed_mark_label): New function, split out from...
(mips_compressed_mark_labels): ...here.
(append_insn): Don't call mips_mark_labels here.
(mips_record_label): Make local.
(mips_add_dot_label): New function.

gas/testsuite/
* gas/mips/dot-1.s, gas/mips/dot-1.d, gas/mips/micromips@dot-1.d,
gas/mips/mips16@dot-1.d: New test.
* gas/mips/mips.exp: Run it.

Fix typo in previous commit.

gas/
* config/tc-mips.c (SEXT_16BIT): New macro.
(mips16_immed): Take the reloc type as a parameter.  Do not impose
a signed vs. unsigned distinction on the value when a relocation
operator was used.
(mips16_macro_build, mips16_ip, md_convert_frag): Pass the reloc
type to mips16_immed.
(macro): Use SEXT_16BIT.

gas/
* config/tc-mips.c (read_insn, write_insn, read_compressed_insn):
New functions.
(install_insn, md_apply_fix, md_convert_frag, mips_handle_align):
Use them, and write_compressed_insn.

gas/
* config/tc-mips.c (mips_cl_insn): Remove use_extend and extend.
(MIPS16_EXTEND): New macro.
(mips16_opcode_length): New function.
(insn_length): Use it.
(create_insn): Update after mips_cl_insn change.
(write_compressed_insn): New function.
(install_insn): Use it.
(append_insn): Use insn_length to check for unextended MIPS16
instructions.
(mips16_macro_build): Update call to mips16_immed.
(mips16_ip): Likewise.  Use MIPS16_EXTEND to force an extended
instruction.
(mips16_immed): Remove use_extend and extend; install EXTEND
opcodes in the upper 16 bits of *INSN instead.  Keep the
instruction extended if it already is.  Replace warn, small
and ext with a forced_insn_length-like parameter.
(md_convert_frag): Update call mips16_immed.
Use write_compressed_insn.

*** empty log message ***

daily update

gdb/testsuite/

* remote.c (remote_get_trace_status): Remove setting default
values of fields of 'ts'.

daily update

*** empty log message ***

gdb/
Fix internal error on canonicalization of clang types.
* cp-name-parser.y (operator): New comment at make_operator call for
new, delete, new[] and delete[].
(exp): Use "sizeof ".  Add new comment at make_operator call.

gdb/testsuite/
Fix internal error on canonicalization of clang types.
* gdb.dwarf2/dw2-canonicalize-type.S: New file.
* gdb.dwarf2/dw2-canonicalize-type.exp: New file.
* lib/gdb.exp (gdb_file_cmd): Catch also GDB internal error.

gdb/
Fix disassemble without parameters in tailcall frame.
* cli/cli-cmds.c (disassemble_current_function): Use
get_frame_address_in_block.

gdb/testsuite/
Fix disassemble without parameters in tailcall frame.
* gdb.arch/amd64-entry-value.exp (down, disassemble): New tests.

* c-typeprint.c (c_type_print_base) <TYPE_CODE_STRUCT,
TYPE_CODE_UNION>: Unify, removing a goto.

* c-typeprint.c (cp_type_print_derivation_info): Fix comment.

sourceware.org/ml/gdb-patches/2012-08/msg00715.html

gdb/ChangeLog

        * findvar.c (read_frame_register_value): Mark the result value as
        optimized out if any of the input registers have been optimized out.

gdb/testsuite/ChangeLog

        * gdb.dwarf2/dw2-op-out-param.S: New file.
        * gdb.dwarf2/dw2-op-out-param.exp: New file.

2012-09-21  Steve Ellcey  <sellcey@mips.com>

* configure.ac: Add mips*-mti-elf* target.
* configure: Regenerate.

* python/python.c (finalize_python): Only define if HAVE_PYTHON.

gdb/testsuite:
* gdb.mi/mi2-cli.exp: Remove redundant '\'.

* eval.c (evaluate_subexp_standard): Eliminate single-use
variable LOWER.

gdb/testsuite:

* gdb.mi/mi-cli.exp: Remove.
* gdb.mi/mi2-cli.exp: Merged from mi-cli.exp.

gdb/testsuite:
* gdb.mi/mi-reverse.exp: Fix the typo in expected output of
"=record-started" notification.

gdb/doc:
2012-09-21  Yao Qi  <yao@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

* gdb.texinfo (GDB/MI Async Records): Document notification
'record-started' and 'record-stopped'.
* observer.texi (GDB Observers): New observer 'record-changed'.
gdb:
2012-09-21  Yao Qi  <yao@codesourcery.com>

* mi/mi-interp.c: Declare mi_record_changed.
(mi_interpreter_init): Call observer_attach_record_changed.
(mi_record_changed): New.
* record.c (record_open): Call observer_notify_record_changed.
(cmd_record_stop): Call observer_notify_record_changed.
* NEWS: Mention it.

gdb/testsuite:
2012-09-21  Yao Qi  <yao@codesourcery.com>

* gdb.mi/mi-record-changed.exp: New.
* gdb.mi/mi-reverse.exp: Adjust expected output.

daily update

*** empty log message ***

* NEWS: Update.
* python/python.c (finalize_python): New function.
(_initialize_python): Make a final cleanup.
testsuite
* gdb.python/python.exp: Test atexit.register.

* boards/dwarf4-gdb-index.exp: New file.

* gdb.base/callfuncs.exp (do_function_calls): Set unwindonsignal to on
while running the tests.

Add x86-64-arch-2-1/x86-64-arch-2-2 tests

* gas/i386/i386.exp: Run x86-64-arch-2-1 and x86-64-arch-2-2.

* gas/i386/x86-64-arch-2-1.l: New file.
* gas/i386/x86-64-arch-2-1.s: Likewise.
* gas/i386/x86-64-arch-2-2.l: Likewise.
* gas/i386/x86-64-arch-2-2.s: Likewise.

* corefile.c (core_sym_class): Allow for ".constprop.N" cloned
functions.

Replace CpuSSE3 with CpuCX16 for cmpxchg16b

gas/

* config/tc-i386.c (cpu_arch): Add .cx16.
* doc/c-i386.texi: Document .cx16.

gas/testsuite/

* gas/i386/x86-64-arch-2.s: Add test for cmpxchg16b.
* gas/i386/x86-64-arch-2.d: Update correspondingly.
* gas/i386/x86-64-arch-2-bdver2.d: Likewise.
* gas/i386/x86-64-arch-2-btver1.d: Likewise.
* gas/i386/x86-64-arch-2-btver2.d: Likewise.
* gas/i386/x86-64-arch-2-lzcnt.d: Likewise.
* gas/i386/x86-64-arch-2-prefetchw.d: Likewise.
* gas/i386/ilp32/x86-64-arch-2.d: Likewise.

opcodes/

* i386-gen.c (cpu_flag_init): Add CpuCX16 to CPU_NOCONA_FLAGS,
CPU_CORE_FLAGS, CPU_CORE2_FLAGS, CPU_COREI7_FLAGS,
CPU_BDVER1_FLAGS, CPU_BDVER2_FLAGS, CPU_BTVER1_FLAGS,
CPU_BTVER2_FLAGS.  Add CPU_CX16_FLAGS.
(cpu_flags): Add CpuCX16.
* i386-opc.h (CpuCX16): New.
(i386_cpu_flags): Add cpucx16.
* i386-opc.tbl: Replace CpuSSE3 with CpuCX16 for cmpxchg16b.
* i386-tbl.h: Regenerate.
* i386-init.h: Likewise.

Fix computation of got relocations for .got sections greater than
0x8000 bytes.

* configure.ac (host_libs): Add libbacktrace.
(target_libraries): Add libbacktrace.
* Makefile.def (host_modules): Add libbacktrace.
(target_modules): Likewise.
* configure, Makefile.in: Rebuild.

*** empty log message ***

daily update

2012-09-19  Steve Ellcey  <sellcey@mips.com>

* mt-sde: Change -mcode-xonly to -mcode-readable=pcrel.

Fix spacing in last checkin.

2012-09-19  Steve Ellcey  <sellcey@mips.com>

* configure.tgt: Add mips*-mti-elf* target.

2012-09-19  Steve Ellcey  <sellcey@mips.com>

* config.bfd: Add mips*-mti-elf* target.

* buildsym.h (param_symbols): Delete, unused.
(context_stack): Delete member "params", unused.
* buildsym.c (push_context): Update.
* dwarf2read.c (read_func_scope): Update.

gdb/
* sh-tdep.c (sh_register_convert_to_virtual)
(sh_register_convert_to_raw): Add a gdbarch parameter.  Update
all callers.  Just do a memcpy if not the little-endian case.

gdb/
* h8300-tdep.c (h8300_gdbarch_init): Invoke
set_gdbarch_double_format and set_gdbarch_long_double_format.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Invoke
set_gdbarch_double_format.
* sh-tdep.c (sh_gdbarch_init): Likewise.

gdb/
* NEWS: Document the removal of SH's 'regs' command.
* sh-tdep.c (_initialize_sh_tdep): Remove the deprecated 'regs'
command.

gdb/doc/
* gdb.texinfo: Document the removal of SH's 'regs' command.

2012-09-19  Chris Schlumberger-Socha  <chris.schlumberger-socha@arm.com>

* ld-aarch64/emit-relocs-309-low.d: Replace symbol with regexp.
* ld-aarch64/emit-relocs-309-up.d: Likewise.

* ld-scripts/assign-loc.d: New file.  Test for assigning absolute
symbol to location counter.
* ld-scripts/assign-loc.t: New file.  Linker script for above test.
* ld-scripts/expr.exp: Add new assignment test.

Properly handle common symbol and weak function

bfd/

PR ld/14591
* elf-bfd.h (_bfd_elf_merge_symbol): Add an argument to return
if the old symbol is weak.

* elf32-sh-symbian.c (sh_symbian_relocate_section): Update
_bfd_elf_merge_symbol call.

* elflink.c (_bfd_elf_merge_symbol): Add an argument to return
if the old symbol is weak.
(_bfd_elf_add_default_symbol): Update _bfd_elf_merge_symbol
call.
(elf_link_add_object_symbols): Don't update symbol type from a
weak definition.  Update symbol type from a common symbol when
overriding a weak symbol.

ld/testsuite/

PR ld/14591
* ld-elf/comm-data.exp (run_ld_link_tests): Add comm-data3a and
comm-data3b tests.

* ld-ifunc/ifunc.exp (run_ld_link_exec_tests): New.

* ld-elf/comm-data3.sd: New file.
* ld-elf/comm-data3a.s: Likewise.
* ld-elf/comm-data3b.s: Likewise.
* ld-ifunc/ifunc-17a-i386.d: Likewise.
* ld-ifunc/ifunc-17a-x86-64.d: Likewise.
* ld-ifunc/ifunc-17a.s: Likewise.
* ld-ifunc/ifunc-17b-i386.d: Likewise.
* ld-ifunc/ifunc-17b-x86-64.d: Likewise.
* ld-ifunc/ifunc-17b.s: Likewise.
* ld-ifunc/ifunc-common-1.out: Likewise.
* ld-ifunc/ifunc-common-1a.c: Likewise.
* ld-ifunc/ifunc-common-1b.c: Likewise.

*** empty log message ***

daily update

gdb/ChangeLog:
2012-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>

* infcmd.c (_initialize_infcmd): Register `j' as an alias for
`jump'.

gdb/doc/ChangeLog:
2012-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.texinfo (jump): Mention new alias `j' for `jump'.

wrong language used when re-setting breakpoint

The debugger sometimes fails to re-set a breakpoint as follow,
causing it to become disabled:

    (gdb) b nested_sub
    Breakpoint 1 at 0x401cec: file foo.adb, line 7.
    (gdb) b do_nothing
    Breakpoint 2 at 0x401cdc: file pck.adb, line 4.
    (gdb) run
    Starting program: /[...]/foo
    Error in re-setting breakpoint 1: Function "nested_sub" not defined.

    Breakpoint 2, pck.do_nothing () at pck.adb:4
    4             null;

This only happens on machines where the debug-file-directory is
a valid directory name.

The reason behind the error is that the linespec code that re-sets
the breakpoints uses the current_language global when iterating
over a symtab's symbols. However, the that global gets switched from
Ada to C during the startup phase, probably as a side-effect of stopping
in some system code for which debugging info is available. The fix
is to make sure that we use the correct language.

gdb/ChangeLog:

        * linespec.c (iterate_over_all_matching_symtabs): Use the correct
        language when iterating over symbols.

gdb/testsuite/ChangeLog:

        * gdb.ada/bp_reset: New testcase.

2012-09-18  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
opcodes:
* arm-dis.c: Changed ldra and strl-form mnemonics
to lda and stl-form.
gas:
* config/tc-arm.c: Changed ldra and strl-form mnemonics
to lda and stl-form for armv8.
gas/testsuite:
* gas/arm/armv8-a-bad.l: Updated for changed mnemonics.
* gas/arm/armv8-a-bad.s: Likewise.
* gas/arm/armv8-a.d: Likewise.
* gas/arm/armv8-a.s: Likewise.
* gas/arm/inst.s: Added test for ldrt encoding compatibly with ldralt.
* gas/arm/inst.d: Updated.

opcodes/
* micromips-opc.c (micromips_opcodes): Correct the encoding of
the "swxc1" instruction.

gas/testsuite/
* gas/mips/micromips.d: Correct the disassembly of SWXC1.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips@24k-triple-stores-1.d: Likewise.
* gas/mips/micromips@mips4-fp.d: Likewise.

gdb/doc:

* gdb.texinfo (GDB/MI Async Records): Document new MI
notifications '=tsv-created' and '=tsv-deleted'.
* observer.texi (GDB Observers): New observer tsv_created and
tsv_deleted.

gdb:

* mi/mi-interp.c: Declare mi_tsv_created and mi_tsv_deleted.
(mi_interpreter_init): Call observer_attach_tsv_created and
observer_attach_tsv_deleted.
(mi_tsv_created, mi_tsv_deleted): New.
* tracepoint.c (delete_trace_state_variable): Call
observer_notify_tsv_deleted.
(trace_variable_command): Call observer_notify_tsv_created.
(delete_trace_variable_command): Call
observer_notify_tsv_deleted.
(create_tsv_from_upload): Call observer_notify_tsv_created.
* NEWS: Mention it.

gdb/testsuite:

gdb.trace/mi-tsv-changed.exp: New.

gdb/doc:

* observer.texi (GDB Observers): New observer 'traceframe_changed'.
* gdb.texinfo (GDB/MI Async Records): Mention new MI notification
'=traceframe-changed'.

gdb:

* tracepoint.c (tfind_1): Call observer_notify_traceframe_changed
if traceframe changed.

* mi/mi-cmds.c (mi_cmd mi_cmds): Adjust for command
"trace-find".
* mi/mi-interp.c: Declare 'mi_traceframe_changed'.
(mi_interpreter_init): Hook mi_traceframe_changed to observer
'traceframe_changed'.
(mi_traceframe_changed): New.
* mi/mi-main.h (struct mi_suppress_notification) <traceframe>:
New field.

* NEWS: Mention the new MI notification.

gdb/testsuite:

* gdb.trace/mi-traceframe-changed.exp: New.

Ignore discarded section when converting mov to lea

* elf32-i386.c (elf_i386_convert_mov_to_lea): Ignore discarded
section.
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Likewise.

*** empty log message ***

daily update

Moved the Changelog entries for breakpoint.c and remote.c out of Changelog
and into gdb/Changelog.

Assemble all sources files in each test

* ld-elf/shared.exp (build_cxx_tests): Move out the commented out
test.

* lib/ld-lib.exp (run_ld_link_exec_tests): Assemble all sources
files in each test.

Correcting error in gdb/Changelog from previous commit.

Updated gdb/Changelog:

* MAINTAINERS (Write After Approval): Add "Mike Wrighton".