From 7b4e9ced69a120e7e7446e3303d2307aa29d891c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 21 Jan 2011 14:03:28 +0000 Subject: [PATCH] ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas Signed-off-by: Russell King --- drivers/video/amba-clcd.c | 95 ++++++++++++++++++++++++++++++++++----- include/linux/amba/clcd.h | 82 ++++++++++++++++++++++++++------- 2 files changed, 149 insertions(+), 28 deletions(-) diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index aedbb345f8a9..8bd370697533 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -120,8 +120,23 @@ static void clcdfb_enable(struct clcd_fb *fb, u32 cntl) static int clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) { + u32 caps; int ret = 0; + if (fb->panel->caps && fb->board->caps) + caps = fb->panel->caps & fb->board->caps; + else { + /* Old way of specifying what can be used */ + caps = fb->panel->cntl & CNTL_BGR ? + CLCD_CAP_BGR : CLCD_CAP_RGB; + /* But mask out 444 modes as they weren't supported */ + caps &= ~CLCD_CAP_444; + } + + /* Only TFT panels can do RGB888/BGR888 */ + if (!(fb->panel->cntl & CNTL_LCDTFT)) + caps &= ~CLCD_CAP_888; + memset(&var->transp, 0, sizeof(var->transp)); var->red.msb_right = 0; @@ -133,6 +148,13 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) case 2: case 4: case 8: + /* If we can't do 5551, reject */ + caps &= CLCD_CAP_5551; + if (!caps) { + ret = -EINVAL; + break; + } + var->red.length = var->bits_per_pixel; var->red.offset = 0; var->green.length = var->bits_per_pixel; @@ -140,23 +162,61 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) var->blue.length = var->bits_per_pixel; var->blue.offset = 0; break; + case 16: - var->red.length = 5; - var->blue.length = 5; + /* If we can't do 444, 5551 or 565, reject */ + if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) { + ret = -EINVAL; + break; + } + /* - * Green length can be 5 or 6 depending whether - * we're operating in RGB555 or RGB565 mode. + * Green length can be 4, 5 or 6 depending whether + * we're operating in 444, 5551 or 565 mode. */ - if (var->green.length != 5 && var->green.length != 6) - var->green.length = 6; + if (var->green.length == 4 && caps & CLCD_CAP_444) + caps &= CLCD_CAP_444; + if (var->green.length == 5 && caps & CLCD_CAP_5551) + caps &= CLCD_CAP_5551; + else if (var->green.length == 6 && caps & CLCD_CAP_565) + caps &= CLCD_CAP_565; + else { + /* + * PL110 officially only supports RGB555, + * but may be wired up to allow RGB565. + */ + if (caps & CLCD_CAP_565) { + var->green.length = 6; + caps &= CLCD_CAP_565; + } else if (caps & CLCD_CAP_5551) { + var->green.length = 5; + caps &= CLCD_CAP_5551; + } else { + var->green.length = 4; + caps &= CLCD_CAP_444; + } + } + + if (var->green.length >= 5) { + var->red.length = 5; + var->blue.length = 5; + } else { + var->red.length = 4; + var->blue.length = 4; + } break; case 32: - if (fb->panel->cntl & CNTL_LCDTFT) { - var->red.length = 8; - var->green.length = 8; - var->blue.length = 8; + /* If we can't do 888, reject */ + caps &= CLCD_CAP_888; + if (!caps) { + ret = -EINVAL; break; } + + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; default: ret = -EINVAL; break; @@ -168,7 +228,20 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) * the bitfield length defined above. */ if (ret == 0 && var->bits_per_pixel >= 16) { - if (fb->panel->cntl & CNTL_BGR) { + bool bgr, rgb; + + bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0; + rgb = caps & CLCD_CAP_RGB && var->red.offset == 0; + + if (!bgr && !rgb) + /* + * The requested format was not possible, try just + * our capabilities. One of BGR or RGB must be + * supported. + */ + bgr = caps & CLCD_CAP_BGR; + + if (bgr) { var->blue.offset = 0; var->green.offset = var->blue.offset + var->blue.length; var->red.offset = var->green.offset + var->green.length; diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h index 2e511219a161..24d26efd1432 100644 --- a/include/linux/amba/clcd.h +++ b/include/linux/amba/clcd.h @@ -53,6 +53,7 @@ #define CNTL_LCDBPP8 (3 << 1) #define CNTL_LCDBPP16 (4 << 1) #define CNTL_LCDBPP16_565 (6 << 1) +#define CNTL_LCDBPP16_444 (7 << 1) #define CNTL_LCDBPP24 (5 << 1) #define CNTL_LCDBW (1 << 4) #define CNTL_LCDTFT (1 << 5) @@ -66,6 +67,32 @@ #define CNTL_LDMAFIFOTIME (1 << 15) #define CNTL_WATERMARK (1 << 16) +enum { + /* individual formats */ + CLCD_CAP_RGB444 = (1 << 0), + CLCD_CAP_RGB5551 = (1 << 1), + CLCD_CAP_RGB565 = (1 << 2), + CLCD_CAP_RGB888 = (1 << 3), + CLCD_CAP_BGR444 = (1 << 4), + CLCD_CAP_BGR5551 = (1 << 5), + CLCD_CAP_BGR565 = (1 << 6), + CLCD_CAP_BGR888 = (1 << 7), + + /* connection layouts */ + CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444, + CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551, + CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565, + CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888, + + /* red/blue ordering */ + CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 | + CLCD_CAP_RGB565 | CLCD_CAP_RGB888, + CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 | + CLCD_CAP_BGR565 | CLCD_CAP_BGR888, + + CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB, +}; + struct clcd_panel { struct fb_videomode mode; signed short width; /* width in mm */ @@ -73,6 +100,7 @@ struct clcd_panel { u32 tim2; u32 tim3; u32 cntl; + u32 caps; unsigned int bpp:8, fixedtimings:1, grayscale:1; @@ -96,6 +124,11 @@ struct clcd_fb; struct clcd_board { const char *name; + /* + * Optional. Hardware capability flags. + */ + u32 caps; + /* * Optional. Check whether the var structure is acceptable * for this display. @@ -155,34 +188,35 @@ struct clcd_fb { static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) { + struct fb_var_screeninfo *var = &fb->fb.var; u32 val, cpl; /* * Program the CLCD controller registers and start the CLCD */ - val = ((fb->fb.var.xres / 16) - 1) << 2; - val |= (fb->fb.var.hsync_len - 1) << 8; - val |= (fb->fb.var.right_margin - 1) << 16; - val |= (fb->fb.var.left_margin - 1) << 24; + val = ((var->xres / 16) - 1) << 2; + val |= (var->hsync_len - 1) << 8; + val |= (var->right_margin - 1) << 16; + val |= (var->left_margin - 1) << 24; regs->tim0 = val; - val = fb->fb.var.yres; + val = var->yres; if (fb->panel->cntl & CNTL_LCDDUAL) val /= 2; val -= 1; - val |= (fb->fb.var.vsync_len - 1) << 10; - val |= fb->fb.var.lower_margin << 16; - val |= fb->fb.var.upper_margin << 24; + val |= (var->vsync_len - 1) << 10; + val |= var->lower_margin << 16; + val |= var->upper_margin << 24; regs->tim1 = val; val = fb->panel->tim2; - val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS; - val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS; + val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS; + val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS; - cpl = fb->fb.var.xres_virtual; + cpl = var->xres_virtual; if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */ /* / 1 */; - else if (!fb->fb.var.grayscale) /* STN color */ + else if (!var->grayscale) /* STN color */ cpl = cpl * 8 / 3; else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */ cpl /= 8; @@ -194,10 +228,22 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) regs->tim3 = fb->panel->tim3; val = fb->panel->cntl; - if (fb->fb.var.grayscale) + if (var->grayscale) val |= CNTL_LCDBW; - switch (fb->fb.var.bits_per_pixel) { + if (fb->panel->caps && fb->board->caps && + var->bits_per_pixel >= 16) { + /* + * if board and panel supply capabilities, we can support + * changing BGR/RGB depending on supplied parameters + */ + if (var->red.offset == 0) + val &= ~CNTL_BGR; + else + val |= CNTL_BGR; + } + + switch (var->bits_per_pixel) { case 1: val |= CNTL_LCDBPP1; break; @@ -217,10 +263,12 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) * custom external wiring. */ if (amba_part(fb->dev) == 0x110 || - fb->fb.var.green.length == 5) + var->green.length == 5) val |= CNTL_LCDBPP16; - else + else if (var->green.length == 6) val |= CNTL_LCDBPP16_565; + else + val |= CNTL_LCDBPP16_444; break; case 32: val |= CNTL_LCDBPP24; @@ -228,7 +276,7 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) } regs->cntl = val; - regs->pixclock = fb->fb.var.pixclock; + regs->pixclock = var->pixclock; } static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) -- 2.34.1