From 8bff7c6b0f63c7ee9c5e3a076338d74125b8debb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 24 Sep 2008 13:05:10 +0200 Subject: [PATCH] libata: set queue SSD flag for SSD devices SSD devices should give an RPM setting of 1 in word 217 of the ID page. If we see such a device, tell the block layer about it. Signed-off-by: Jens Axboe --- drivers/ata/libata-scsi.c | 4 ++++ include/linux/ata.h | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b9d3ba423cb2..054370700abf 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -977,6 +977,10 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); } else { + if (ata_id_is_ssd(dev->id)) + queue_flag_set_unlocked(QUEUE_FLAG_NONROT, + sdev->request_queue); + /* ATA devices must be sector aligned */ blk_queue_update_dma_alignment(sdev->request_queue, ATA_SECT_SIZE - 1); diff --git a/include/linux/ata.h b/include/linux/ata.h index 8a12d718c169..c1c8b4a4ba26 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -88,6 +88,7 @@ enum { ATA_ID_DLF = 128, ATA_ID_CSFO = 129, ATA_ID_CFA_POWER = 160, + ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), ATA_ID_SERNO_LEN = 20, @@ -691,6 +692,11 @@ static inline int ata_id_is_cfa(const u16 *id) return 0; } +static inline int ata_id_is_ssd(const u16 *id) +{ + return id[ATA_ID_ROT_SPEED] == 0x01; +} + static inline int ata_drive_40wire(const u16 *dev_id) { if (ata_id_is_sata(dev_id)) -- 2.34.1