From f1c9e4462a0f426fe83af8c2aa98b4980911e801 Mon Sep 17 00:00:00 2001 From: Jeff Law Date: Thu, 20 Jul 1995 20:33:39 +0000 Subject: [PATCH] * gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds after the inferior gdb has started. 'cuz lynx may take a couple minutes to start the inferior gdb... * gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf after each command. * gdb.base/funcargs.exp: Likewise. * gdb.base/gdbvars.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.c++/demangle.exp: Likewise. * gdb.c++/inherit.exp: Likewise. * gdb.chill/chexp.exp: Likewise. * gdb.fortran/exprs.exp: Likewise. Just in case we can't get a version of expect that sets the tty modes right on lynx to avoid this problem. --- gdb/testsuite/ChangeLog | 17 ++- gdb/testsuite/gdb.base/a1-selftest.exp | 8 +- gdb/testsuite/gdb.base/gdbvars.exp | 117 ++++++++++++++++ gdb/testsuite/gdb.chill/chexp.exp | 6 +- gdb/testsuite/gdb.fortran/exprs.exp | 186 ++++++++++++------------- 5 files changed, 234 insertions(+), 100 deletions(-) create mode 100644 gdb/testsuite/gdb.base/gdbvars.exp diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 4c5c0301e3..27d12d8921 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,4 +1,19 @@ -Thu Jul 20 11:40:13 1995 Jeff Law (law@snake.cs.utah.edu) +Thu Jul 20 13:28:36 1995 Jeffrey A. Law + + * gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds + after the inferior gdb has started. + + * gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf + after each command. + * gdb.base/funcargs.exp: Likewise. + * gdb.base/gdbvars.exp: Likewise. + * gdb.base/interrupt.exp: Likewise. + * gdb.base/list.exp: Likewise. + * gdb.base/watchpoint.exp: Likewise. + * gdb.c++/demangle.exp: Likewise. + * gdb.c++/inherit.exp: Likewise. + * gdb.chill/chexp.exp: Likewise. + * gdb.fortran/exprs.exp: Likewise. * gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall test if we can't handle IO to/from the inferior. diff --git a/gdb/testsuite/gdb.base/a1-selftest.exp b/gdb/testsuite/gdb.base/a1-selftest.exp index 58ef0ac5c1..5a56a895c7 100644 --- a/gdb/testsuite/gdb.base/a1-selftest.exp +++ b/gdb/testsuite/gdb.base/a1-selftest.exp @@ -52,7 +52,7 @@ proc test_with_self {} { # entire symbol table. Set the timeout to 10 minutes, which should be # adequate for most environments (it *has* timed out with 5 min on a # SPARCstation SLC under moderate load, so this isn't unreasonable). - # After gdb is loaded, set the timeout to 30 seconds for the duration + # After gdb is started, set the timeout to 30 seconds for the duration # of this test, and then back to the original value. set timeout 600 @@ -60,8 +60,6 @@ proc test_with_self {} { return -1 } - set timeout 30 - # disassemble yourself send "x/10i main\n" expect { @@ -117,6 +115,10 @@ proc test_with_self {} { } } + # It may take a very long time for the inferior gdb to start (lynx), + # so we wait until after it's started to reset the timeout value. + set timeout 30 + # do we have a version number ? send "print version\n" expect { diff --git a/gdb/testsuite/gdb.base/gdbvars.exp b/gdb/testsuite/gdb.base/gdbvars.exp new file mode 100644 index 0000000000..d7c8253481 --- /dev/null +++ b/gdb/testsuite/gdb.base/gdbvars.exp @@ -0,0 +1,117 @@ +# Copyright (C) 1992 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Fred Fish. (fnf@cygnus.com) + +if $tracelevel then { + strace $tracelevel +} + +set prms_id 0 +set bug_id 0 + +proc test_convenience_variables {} { + global prompt + + gdb_test "set \$foo = 101" " = 101\[\r\n\]+" \ + "Set a new convenience variable" + + gdb_test "print \$foo" " = 101" \ + "Print contents of new convenience variable" + + gdb_test "set \$foo = 301" " = 301\[\r\n\]+" \ + "Set convenience variable to a new value" + + gdb_test "print \$foo" " = 301" \ + "Print new contents of convenience variable" + + gdb_test "set \$_ = 11" " = 11\[\r\n\]+" \ + "Set convenience variable \$_" + + gdb_test "print \$_" " = 11" \ + "Print contents of convenience variable \$_" + + gdb_test "print \$foo + 10" " = 311" \ + "Use convenience variable in arithmetic expression" + + gdb_test "print (\$foo = 32) + 4" " = 36" \ + "Use convenience variable assignment in arithmetic expression" + + gdb_test "print \$bar" " = void" \ + "Print contents of uninitialized convenience variable" +} + +proc test_value_history {} { + global prompt + + gdb_test "print 101" "\\\$1 = 101" \ + "Set value-history\[1\] using \$1" + + gdb_test "print 102" "\\\$2 = 102" \ + "Set value-history\[2\] using \$2" + + gdb_test "print 103" "\\\$3 = 103" \ + "Set value-history\[3\] using \$3" + + gdb_test "print \$\$" "\\\$4 = 102" \ + "Print value-history\[MAX-1\] using inplicit index \$\$" + + gdb_test "print \$\$" "\\\$5 = 103" \ + "Print value-history\[MAX-1\] again using implicit index \$\$" + + gdb_test "print \$" "\\\$6 = 103" \ + "Print value-history\[MAX\] using implicit index \$" + + gdb_test "print \$\$2" "\\\$7 = 102" \ + "Print value-history\[MAX-2\] using explicit index \$\$2" + + gdb_test "print \$0" "\\\$8 = 102" \ + "Print value-history\[MAX\] using explicit index \$0" + + gdb_test "print 108" "\\\$9 = 108" "" + + gdb_test "print \$\$0" "\\\$10 = 108" \ + "Print value-history\[MAX\] using explicit index \$\$0" + + gdb_test "print \$1" "\\\$11 = 101" \ + "Print value-history\[1\] using explicit index \$1" + + gdb_test "print \$2" "\\\$12 = 102" \ + "Print value-history\[2\] using explicit index \$2" + + gdb_test "print \$3" "\\\$13 = 103" \ + "Print value-history\[3\] using explicit index \$3" + + gdb_test "print \$-3" "\\\$14 = 100" \ + "Print (value-history\[MAX\] - 3) using implicit index \$" + + gdb_test "print \$1 + 3" "\\\$15 = 104" \ + "Use value-history element in arithmetic expression" +} + +# Start with a fresh gdb. + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir + +send "set print sevenbit-strings\n" ; expect -re ".*$prompt $" + +test_value_history +test_convenience_variables diff --git a/gdb/testsuite/gdb.chill/chexp.exp b/gdb/testsuite/gdb.chill/chexp.exp index 0f957a7fb6..19141b8429 100644 --- a/gdb/testsuite/gdb.chill/chexp.exp +++ b/gdb/testsuite/gdb.chill/chexp.exp @@ -248,19 +248,19 @@ proc test_float_literals_accepted {} { proc test_convenience_variables {} { global prompt - gdb_test "set \$foo := 101" " := 101" \ + gdb_test "set \$foo := 101" " := 101\[\r\n\]+" \ "Set a new convenience variable" gdb_test "print \$foo" " = 101" \ "Print contents of new convenience variable" - gdb_test "set \$foo := 301" " := 301" \ + gdb_test "set \$foo := 301" " := 301\[\r\n\]+" \ "Set convenience variable to a new value" gdb_test "print \$foo" " = 301" \ "Print new contents of convenience variable" - gdb_test "set \$_ := 11" " := 11" \ + gdb_test "set \$_ := 11" " := 11\[\r\n\]+" \ "Set convenience variable \$_" gdb_test "print \$_" " = 11" \ diff --git a/gdb/testsuite/gdb.fortran/exprs.exp b/gdb/testsuite/gdb.fortran/exprs.exp index 8c16bcf07b..28c86fe963 100644 --- a/gdb/testsuite/gdb.fortran/exprs.exp +++ b/gdb/testsuite/gdb.fortran/exprs.exp @@ -60,8 +60,8 @@ proc test_integer_literals_accepted {} { # Test various decimal values. - test_print_accept "p 123" "123" - test_print_accept "p -123" "-123" + gdb_test "p 123" " = 123" + gdb_test "p -123" " = -123" } proc test_character_literals_accepted {} { @@ -69,7 +69,7 @@ proc test_character_literals_accepted {} { # Test various character values. - test_print_accept "p 'a'" "'a'" + gdb_test "p 'a'" " = 'a'" } proc test_integer_literals_rejected {} { @@ -83,8 +83,8 @@ proc test_logical_literals_accepted {} { # Test the only possible values for a logical, TRUE and FALSE. - test_print_accept "p .TRUE." ".TRUE." - test_print_accept "p .FALSE." ".FALSE." + gdb_test "p .TRUE." " = .TRUE." + gdb_test "p .FALSE." " = .FALSE." } proc test_float_literals_accepted {} { @@ -92,84 +92,84 @@ proc test_float_literals_accepted {} { # Test various floating point formats - test_print_accept "p .44 .LT. .45" "1" - test_print_accept "p .44 .GT. .45" "0" - test_print_accept "p 0.44 .LT. 0.45" "1" - test_print_accept "p 0.44 .GT. 0.45" "0" - test_print_accept "p 44. .LT. 45." "1" - test_print_accept "p 44. .GT. 45." "0" - test_print_accept "p 44.0 .LT. 45.0" "1" - test_print_accept "p 44.0 .GT. 45.0" "0" - test_print_accept "p 10D20 .LT. 10D21" "1" - test_print_accept "p 10D20 .GT. 10D21" "0" - test_print_accept "p 10d20 .LT. 10d21" "1" - test_print_accept "p 10d20 .GT. 10d21" "0" - test_print_accept "p 10E20 .LT. 10E21" "1" - test_print_accept "p 10E20 .GT. 10E21" "0" - test_print_accept "p 10e20 .LT. 10e21" "1" - test_print_accept "p 10e20 .GT. 10e21" "0" - test_print_accept "p 10.D20 .LT. 10.D21" "1" - test_print_accept "p 10.D20 .GT. 10.D21" "0" - test_print_accept "p 10.d20 .LT. 10.d21" "1" - test_print_accept "p 10.d20 .GT. 10.d21" "0" - test_print_accept "p 10.E20 .LT. 10.E21" "1" - test_print_accept "p 10.E20 .GT. 10.E21" "0" - test_print_accept "p 10.e20 .LT. 10.e21" "1" - test_print_accept "p 10.e20 .GT. 10.e21" "0" - test_print_accept "p 10.0D20 .LT. 10.0D21" "1" - test_print_accept "p 10.0D20 .GT. 10.0D21" "0" - test_print_accept "p 10.0d20 .LT. 10.0d21" "1" - test_print_accept "p 10.0d20 .GT. 10.0d21" "0" - test_print_accept "p 10.0E20 .LT. 10.0E21" "1" - test_print_accept "p 10.0E20 .GT. 10.0E21" "0" - test_print_accept "p 10.0e20 .LT. 10.0e21" "1" - test_print_accept "p 10.0e20 .GT. 10.0e21" "0" - test_print_accept "p 10.0D+20 .LT. 10.0D+21" "1" - test_print_accept "p 10.0D+20 .GT. 10.0D+21" "0" - test_print_accept "p 10.0d+20 .LT. 10.0d+21" "1" - test_print_accept "p 10.0d+20 .GT. 10.0d+21" "0" - test_print_accept "p 10.0E+20 .LT. 10.0E+21" "1" - test_print_accept "p 10.0E+20 .GT. 10.0E+21" "0" - test_print_accept "p 10.0e+20 .LT. 10.0e+21" "1" - test_print_accept "p 10.0e+20 .GT. 10.0e+21" "0" - test_print_accept "p 10.0D-11 .LT. 10.0D-10" "1" - test_print_accept "p 10.0D-11 .GT. 10.0D-10" "0" - test_print_accept "p 10.0d-11 .LT. 10.0d-10" "1" - test_print_accept "p 10.0d-11 .GT. 10.0d-10" "0" - test_print_accept "p 10.0E-11 .LT. 10.0E-10" "1" - test_print_accept "p 10.0E-11 .GT. 10.0E-10" "0" - test_print_accept "p 10.0e-11 .LT. 10.0e-10" "1" - test_print_accept "p 10.0e-11 .GT. 10.0e-10" "0" + gdb_test "p .44 .LT. .45" " = 1" + gdb_test "p .44 .GT. .45" " = 0" + gdb_test "p 0.44 .LT. 0.45" " = 1" + gdb_test "p 0.44 .GT. 0.45" " = 0" + gdb_test "p 44. .LT. 45." " = 1" + gdb_test "p 44. .GT. 45." " = 0" + gdb_test "p 44.0 .LT. 45.0" " = 1" + gdb_test "p 44.0 .GT. 45.0" " = 0" + gdb_test "p 10D20 .LT. 10D21" " = 1" + gdb_test "p 10D20 .GT. 10D21" " = 0" + gdb_test "p 10d20 .LT. 10d21" " = 1" + gdb_test "p 10d20 .GT. 10d21" " = 0" + gdb_test "p 10E20 .LT. 10E21" " = 1" + gdb_test "p 10E20 .GT. 10E21" " = 0" + gdb_test "p 10e20 .LT. 10e21" " = 1" + gdb_test "p 10e20 .GT. 10e21" " = 0" + gdb_test "p 10.D20 .LT. 10.D21" " = 1" + gdb_test "p 10.D20 .GT. 10.D21" " = 0" + gdb_test "p 10.d20 .LT. 10.d21" " = 1" + gdb_test "p 10.d20 .GT. 10.d21" " = 0" + gdb_test "p 10.E20 .LT. 10.E21" " = 1" + gdb_test "p 10.E20 .GT. 10.E21" " = 0" + gdb_test "p 10.e20 .LT. 10.e21" " = 1" + gdb_test "p 10.e20 .GT. 10.e21" " = 0" + gdb_test "p 10.0D20 .LT. 10.0D21" " = 1" + gdb_test "p 10.0D20 .GT. 10.0D21" " = 0" + gdb_test "p 10.0d20 .LT. 10.0d21" " = 1" + gdb_test "p 10.0d20 .GT. 10.0d21" " = 0" + gdb_test "p 10.0E20 .LT. 10.0E21" " = 1" + gdb_test "p 10.0E20 .GT. 10.0E21" " = 0" + gdb_test "p 10.0e20 .LT. 10.0e21" " = 1" + gdb_test "p 10.0e20 .GT. 10.0e21" " = 0" + gdb_test "p 10.0D+20 .LT. 10.0D+21" " = 1" + gdb_test "p 10.0D+20 .GT. 10.0D+21" " = 0" + gdb_test "p 10.0d+20 .LT. 10.0d+21" " = 1" + gdb_test "p 10.0d+20 .GT. 10.0d+21" " = 0" + gdb_test "p 10.0E+20 .LT. 10.0E+21" " = 1" + gdb_test "p 10.0E+20 .GT. 10.0E+21" " = 0" + gdb_test "p 10.0e+20 .LT. 10.0e+21" " = 1" + gdb_test "p 10.0e+20 .GT. 10.0e+21" " = 0" + gdb_test "p 10.0D-11 .LT. 10.0D-10" " = 1" + gdb_test "p 10.0D-11 .GT. 10.0D-10" " = 0" + gdb_test "p 10.0d-11 .LT. 10.0d-10" " = 1" + gdb_test "p 10.0d-11 .GT. 10.0d-10" " = 0" + gdb_test "p 10.0E-11 .LT. 10.0E-10" " = 1" + gdb_test "p 10.0E-11 .GT. 10.0E-10" " = 0" + gdb_test "p 10.0e-11 .LT. 10.0e-10" " = 1" + gdb_test "p 10.0e-11 .GT. 10.0e-10" " = 0" } proc test_convenience_variables {} { global prompt - gdb_test "set \\\$foo = 101" " = 101" \ + gdb_test "set \$foo = 101" " = 101\[\r\n\]+" \ "Set a new convenience variable" - gdb_test "print \\\$foo" " = 101" \ + gdb_test "print \$foo" " = 101" \ "Print contents of new convenience variable" - gdb_test "set \\\$foo = 301" " = 301" \ + gdb_test "set \$foo = 301" " = 301\[\r\n\]+" \ "Set convenience variable to a new value" - gdb_test "print \\\$foo" " = 301" \ + gdb_test "print \$foo" " = 301" \ "Print new contents of convenience variable" - gdb_test "set \\\$_ = 11" " = 11" \ + gdb_test "set \$_ = 11" " = 11\[\r\n\]+" \ "Set convenience variable \$_" - gdb_test "print \\\$_" " = 11" \ + gdb_test "print \$_" " = 11" \ "Print contents of convenience variable \$_" - gdb_test "print \\\$foo + 10" " = 311" \ + gdb_test "print \$foo + 10" " = 311" \ "Use convenience variable in arithmetic expression" - gdb_test "print (\\\$foo = 32) + 4" " = 36" \ + gdb_test "print (\$foo = 32) + 4" " = 36" \ "Use convenience variable assignment in arithmetic expression" - gdb_test "print \\\$bar" " = VOID" \ + gdb_test "print \$bar" " = VOID" \ "Print contents of uninitialized convenience variable" } @@ -185,39 +185,39 @@ proc test_value_history {} { gdb_test "print 103" "\\\$3 = 103" \ "Set value-history\[3\] using \$3" - gdb_test "print \\\$\\\$" "\\\$4 = 102" \ + gdb_test "print \$\$" "\\\$4 = 102" \ "Print value-history\[MAX-1\] using inplicit index \$\$" - gdb_test "print \\\$\\\$" "\\\$5 = 103" \ + gdb_test "print \$\$" "\\\$5 = 103" \ "Print value-history\[MAX-1\] again using implicit index \$\$" - gdb_test "print \\\$" "\\\$6 = 103" \ + gdb_test "print \$" "\\\$6 = 103" \ "Print value-history\[MAX\] using implicit index \$" - gdb_test "print \\\$\\\$2" "\\\$7 = 102" \ + gdb_test "print \$\$2" "\\\$7 = 102" \ "Print value-history\[MAX-2\] using explicit index \$\$2" - gdb_test "print \\\$0" "\\\$8 = 102" \ + gdb_test "print \$0" "\\\$8 = 102" \ "Print value-history\[MAX\] using explicit index \$0" gdb_test "print 108" "\\\$9 = 108" "" - gdb_test "print \\\$\\\$0" "\\\$10 = 108" \ + gdb_test "print \$\$0" "\\\$10 = 108" \ "Print value-history\[MAX\] using explicit index \$\$0" - gdb_test "print \\\$1" "\\\$11 = 101" \ + gdb_test "print \$1" "\\\$11 = 101" \ "Print value-history\[1\] using explicit index \$1" - gdb_test "print \\\$2" "\\\$12 = 102" \ + gdb_test "print \$2" "\\\$12 = 102" \ "Print value-history\[2\] using explicit index \$2" - gdb_test "print \\\$3" "\\\$13 = 103" \ + gdb_test "print \$3" "\\\$13 = 103" \ "Print value-history\[3\] using explicit index \$3" - gdb_test "print \\\$-3" "\\\$14 = 100" \ + gdb_test "print \$-3" "\\\$14 = 100" \ "Print (value-history\[MAX\] - 3) using implicit index \$" - gdb_test "print \\\$1 + 3" "\\\$15 = 104" \ + gdb_test "print \$1 + 3" "\\\$15 = 104" \ "Use value-history element in arithmetic expression" } @@ -226,38 +226,38 @@ proc test_arithmetic_expressions {} { # Test unary minus with various operands -# test_print_accept "p -(TRUE)" "-1" "unary minus applied to bool" -# test_print_accept "p -('a')" "xxx" "unary minus applied to char" - test_print_accept "p -(1)" "-1" "unary minus applied to int" - test_print_accept "p -(1.0)" "-1" "unary minus applied to real" +# gdb_test "p -(TRUE)" " = -1" "unary minus applied to bool" +# gdb_test "p -('a')" " = xxx" "unary minus applied to char" + gdb_test "p -(1)" " = -1" "unary minus applied to int" + gdb_test "p -(1.0)" " = -1" "unary minus applied to real" # Test addition with various operands - test_print_accept "p .TRUE. + 1" "2" "bool plus int" - test_print_accept "p 1 + 1" "2" "int plus int" - test_print_accept "p 1.0 + 1" "2" "real plus int" - test_print_accept "p 1.0 + 2.0" "3" "real plus real" + gdb_test "p .TRUE. + 1" " = 2" "bool plus int" + gdb_test "p 1 + 1" " = 2" "int plus int" + gdb_test "p 1.0 + 1" " = 2" "real plus int" + gdb_test "p 1.0 + 2.0" " = 3" "real plus real" # Test subtraction with various operands - test_print_accept "p .TRUE. - 1" "0" "bool minus int" - test_print_accept "p 3 - 1" "2" "int minus int" - test_print_accept "p 3.0 - 1" "2" "real minus int" - test_print_accept "p 5.0 - 2.0" "3" "real minus real" + gdb_test "p .TRUE. - 1" " = 0" "bool minus int" + gdb_test "p 3 - 1" " = 2" "int minus int" + gdb_test "p 3.0 - 1" " = 2" "real minus int" + gdb_test "p 5.0 - 2.0" " = 3" "real minus real" # Test multiplication with various operands - test_print_accept "p .TRUE. * 1" "1" "bool times int" - test_print_accept "p 2 * 3" "6" "int times int" - test_print_accept "p 2.0 * 3" "6" "real times int" - test_print_accept "p 2.0 * 3.0" "6" "real times real" + gdb_test "p .TRUE. * 1" " = 1" "bool times int" + gdb_test "p 2 * 3" " = 6" "int times int" + gdb_test "p 2.0 * 3" " = 6" "real times int" + gdb_test "p 2.0 * 3.0" " = 6" "real times real" # Test division with various operands - test_print_accept "p .TRUE. / 1" "1" "bool divided by int" - test_print_accept "p 6 / 3" "2" "int divided by int" - test_print_accept "p 6.0 / 3" "2" "real divided by int" - test_print_accept "p 6.0 / 3.0" "2" "real divided by real" + gdb_test "p .TRUE. / 1" " = 1" "bool divided by int" + gdb_test "p 6 / 3" " = 2" "int divided by int" + gdb_test "p 6.0 / 3" " = 2" "real divided by int" + gdb_test "p 6.0 / 3.0" " = 2" "real divided by real" # Test modulo with various operands -- 2.34.1