ARM: tegra: Remove commas from unit addresses on Tegra124

[deliverable/linux.git] / arch / arm / boot / dts / tegra124-jetson-tk1.dts

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 9ce385e3aca5f394e2ee60a2b2487e17ecf8537e..e52b82449a79528bc362d96fabe7b2d688abd78e 100644 (file)
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -10,8 +10,8 @@
        compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
 
        aliases {
-               rtc0 = "/i2c@0,7000d000/pmic@40";
-               rtc1 = "/rtc@0,7000e000";
+               rtc0 = "/i2c@7000d000/pmic@40";
+               rtc1 = "/rtc@7000e000";
 
                /* This order keeps the mapping DB9 connector <-> ttyS0 */
                serial0 = &uartd;
@@ -27,7 +27,7 @@
                reg = <0x0 0x80000000 0x0 0x80000000>;
        };
 
-       pcie-controller@0,01003000 {
+       pcie-controller@01003000 {
                status = "okay";
 
                avddio-pex-supply = <&vdd_1v05_run>;
@@ -40,21 +40,21 @@
 
                /* Mini PCIe */
                pci@1,0 {
-                       phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>;
+                       phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
                        phy-names = "pcie-0";
                        status = "okay";
                };
 
                /* Gigabit Ethernet */
                pci@2,0 {
-                       phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>;
+                       phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
                        phy-names = "pcie-0";
                        status = "okay";
                };
        };
 
-       host1x@0,50000000 {
-               hdmi@0,54280000 {
+       host1x@50000000 {
+               hdmi@54280000 {
                        status = "okay";
 
                        hdmi-supply = <&vdd_5v0_hdmi>;
@@ -75,7 +75,7 @@
                vdd-supply = <&vdd_gpu>;
        };
 
-       pinmux: pinmux@0,70000868 {
+       pinmux: pinmux@70000868 {
                pinctrl-names = "boot";
                pinctrl-0 = <&state_boot>;
 
@@ -1400,12 +1400,12 @@
        };
 
        /* DB9 serial port */
-       serial@0,70006300 {
+       serial@70006300 {
                status = "okay";
        };
 
        /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-       i2c@0,7000c000 {
+       i2c@7000c000 {
                status = "okay";
                clock-frequency = <100000>;
 
@@ -1433,25 +1433,25 @@
        };
 
        /* Expansion GEN2_I2C_* */
-       i2c@0,7000c400 {
+       i2c@7000c400 {
                status = "okay";
                clock-frequency = <100000>;
        };
 
        /* Expansion CAM_I2C_* */
-       i2c@0,7000c500 {
+       i2c@7000c500 {
                status = "okay";
                clock-frequency = <100000>;
        };
 
        /* HDMI DDC */
-       hdmi_ddc: i2c@0,7000c700 {
+       hdmi_ddc: i2c@7000c700 {
                status = "okay";
                clock-frequency = <100000>;
        };
 
        /* Expansion PWR_I2C_*, on-board components */
-       i2c@0,7000d000 {
+       i2c@7000d000 {
                status = "okay";
                clock-frequency = <400000>;
 
@@ -1642,12 +1642,12 @@
        };
 
        /* Expansion TS_SPI_* */
-       spi@0,7000d400 {
+       spi@7000d400 {
                status = "okay";
        };
 
        /* Internal SPI */
-       spi@0,7000da00 {
+       spi@7000da00 {
                status = "okay";
                spi-max-frequency = <25000000>;
                spi-flash@0 {
@@ -1657,7 +1657,7 @@
                };
        };
 
-       pmc@0,7000e400 {
+       pmc@7000e400 {
                nvidia,invert-interrupt;
                nvidia,suspend-mode = <1>;
                nvidia,cpu-pwr-good-time = <500>;
@@ -1676,10 +1676,10 @@
        };
 
        /* Serial ATA */
-       sata@0,70020000 {
+       sata@70020000 {
                status = "okay";
 
-               phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>;
+               phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
                phy-names = "sata-0";
 
                hvdd-supply = <&vdd_3v3_lp0>;
@@ -1690,15 +1690,15 @@
                target-12v-supply = <&vdd_12v0_sata>;
        };
 
-       hda@0,70030000 {
+       hda@70030000 {
                status = "okay";
        };
 
-       usb@0,70090000 {
-               phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
-                      <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
-                      <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
-                      <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+       usb@70090000 {
+               phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+                      <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+                      <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+                      <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
                phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
 
                avddio-pex-supply = <&vdd_1v05_run>;
@@ -1713,7 +1713,7 @@
                status = "okay";
        };
 
-       padctl@0,7009f000 {
+       padctl@7009f000 {
                status = "okay";
 
                pads {
@@ -1800,7 +1800,7 @@
        };
 
        /* SD card */
-       sdhci@0,700b0400 {
+       sdhci@700b0400 {
                status = "okay";
                cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
                power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1810,40 +1810,40 @@
        };
 
        /* eMMC */
-       sdhci@0,700b0600 {
+       sdhci@700b0600 {
                status = "okay";
                bus-width = <8>;
                non-removable;
        };
 
        /* CPU DFLL clock */
-       clock@0,70110000 {
+       clock@70110000 {
                status = "okay";
                vdd-cpu-supply = <&vdd_cpu>;
                nvidia,i2c-fs-rate = <400000>;
        };
 
-       ahub@0,70300000 {
-               i2s@0,70301100 {
+       ahub@70300000 {
+               i2s@70301100 {
                        status = "okay";
                };
        };
 
        /* mini-PCIe USB */
-       usb@0,7d004000 {
+       usb@7d004000 {
                status = "okay";
        };
 
-       usb-phy@0,7d004000 {
+       usb-phy@7d004000 {
                status = "okay";
        };
 
        /* USB A connector */
-       usb@0,7d008000 {
+       usb@7d008000 {
                status = "okay";
        };
 
-       usb-phy@0,7d008000 {
+       usb-phy@7d008000 {
                status = "okay";
                vbus-supply = <&vdd_usb3_vbus>;
        };