ARM: tegra: Remove commas from unit addresses on Tegra124

[deliverable/linux.git] / arch / arm / boot / dts / tegra124-nyan.dtsi

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 0710a600cc69306ab1dc4619f0b8237851eba343..271505e0715fd3e9cbfcce6f2832b8dfb3c91487 100644 (file)
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -3,8 +3,8 @@
 
 / {
        aliases {
-               rtc0 = "/i2c@0,7000d000/pmic@40";
-               rtc1 = "/rtc@0,7000e000";
+               rtc0 = "/i2c@7000d000/pmic@40";
+               rtc1 = "/rtc@7000e000";
                serial0 = &uarta;
        };
 
@@ -16,8 +16,8 @@
                reg = <0x0 0x80000000 0x0 0x80000000>;
        };
 
-       host1x@0,50000000 {
-               hdmi@0,54280000 {
+       host1x@50000000 {
+               hdmi@54280000 {
                        status = "okay";
 
                        vdd-supply = <&vdd_3v3_hdmi>;
@@ -29,29 +29,29 @@
                                <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
                };
 
-               sor@0,54540000 {
+               sor@54540000 {
                        status = "okay";
 
                        nvidia,dpaux = <&dpaux>;
                        nvidia,panel = <&panel>;
                };
 
-               dpaux@0,545c0000 {
+               dpaux@545c0000 {
                        vdd-supply = <&vdd_3v3_panel>;
                        status = "okay";
                };
        };
 
-       serial@0,70006000 {
+       serial@70006000 {
                /* Debug connector on the bottom of the board near SD card. */
                status = "okay";
        };
 
-       pwm@0,7000a000 {
+       pwm@7000a000 {
                status = "okay";
        };
 
-       i2c@0,7000c000 {
+       i2c@7000c000 {
                status = "okay";
                clock-frequency = <100000>;
 
@@ -72,7 +72,7 @@
                };
        };
 
-       i2c@0,7000c400 {
+       i2c@7000c400 {
                status = "okay";
                clock-frequency = <100000>;
 
@@ -85,7 +85,7 @@
                };
        };
 
-       i2c@0,7000c500 {
+       i2c@7000c500 {
                status = "okay";
                clock-frequency = <400000>;
 
@@ -95,12 +95,12 @@
                };
        };
 
-       hdmi_ddc: i2c@0,7000c700 {
+       hdmi_ddc: i2c@7000c700 {
                status = "okay";
                clock-frequency = <100000>;
        };
 
-       i2c@0,7000d000 {
+       i2c@7000d000 {
                status = "okay";
                clock-frequency = <400000>;
 
@@ -301,7 +301,7 @@
                };
        };
 
-       spi@0,7000d400 {
+       spi@7000d400 {
                status = "okay";
 
                cros_ec: cros-ec@0 {
@@ -342,7 +342,7 @@
                };
        };
 
-       spi@0,7000da00 {
+       spi@7000da00 {
                status = "okay";
                spi-max-frequency = <25000000>;
 
@@ -353,7 +353,7 @@
                };
        };
 
-       pmc@0,7000e400 {
+       pmc@7000e400 {
                nvidia,invert-interrupt;
                nvidia,suspend-mode = <0>;
                nvidia,cpu-pwr-good-time = <500>;
@@ -364,16 +364,16 @@
                nvidia,sys-clock-req-active-high;
        };
 
-       hda@0,70030000 {
+       hda@70030000 {
                status = "okay";
        };
 
-       usb@0,70090000 {
-               phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-                      <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-                      <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-                      <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-                      <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+       usb@70090000 {
+               phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+                      <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+                      <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+                      <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+                      <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
                phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
                avddio-pex-supply = <&vdd_1v05_run>;
@@ -388,7 +388,7 @@
                status = "okay";
        };
 
-       padctl@0,7009f000 {
+       padctl@7009f000 {
                status = "okay";
 
                pads {
@@ -467,7 +467,7 @@
                reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
        };
 
-       sdhci@0,700b0000 { /* WiFi/BT on this bus */
+       sdhci@700b0000 { /* WiFi/BT on this bus */
                status = "okay";
                bus-width = <4>;
                no-1-8-v;
@@ -478,7 +478,7 @@
                keep-power-in-suspend;
        };
 
-       sdhci@0,700b0400 { /* SD Card on this bus */
+       sdhci@700b0400 { /* SD Card on this bus */
                status = "okay";
                cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
                power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -487,7 +487,7 @@
                vqmmc-supply = <&vddio_sdmmc3>;
        };
 
-       sdhci@0,700b0600 { /* eMMC on this bus */
+       sdhci@700b0600 { /* eMMC on this bus */
                status = "okay";
                bus-width = <8>;
                no-1-8-v;
@@ -495,14 +495,14 @@
        };
 
        /* CPU DFLL clock */
-       clock@0,70110000 {
+       clock@70110000 {
                status = "disabled";
                vdd-cpu-supply = <&vdd_cpu>;
                nvidia,i2c-fs-rate = <400000>;
        };
 
-       ahub@0,70300000 {
-               i2s@0,70301100 {
+       ahub@70300000 {
+               i2s@70301100 {
                        status = "okay";
                };
        };