ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3

This patch adds the bus device tree nodes for INT (Internal) block
to enable the AMBA bus frequency scaling and add the NoC (Network on Chip)
Probe Device Tree node to measure the bandwidth for AMBA AXI bus.

The WCORE bus bus is parent device in INT block using VDD_INT.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1bd507bfa750155579259b14195e08dab8adbb00..d32984c5ff932418b8f96c8ebf44ce144086b9a8 100644 (file)
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -56,6 +56,89 @@
        };
 };
 
+&bus_wcore {
+       devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+                       <&nocp_mem1_0>, <&nocp_mem1_1>;
+       vdd-supply = <&buck3_reg>;
+       exynos,saturation-ratio = <100>;
+       status = "okay";
+};
+
+&bus_noc {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_fsys_apb {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_fsys {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_fsys2 {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_mfc {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_gen {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_peri {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_g2d {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_g2d_acp {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_jpeg {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_jpeg_apb {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_disp1_fimd {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_disp1 {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_gscl_scaler {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
+&bus_mscl {
+       devfreq = <&bus_wcore>;
+       status = "okay";
+};
+
 &clock_audss {
        assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
                        <&clock_audss EXYNOS_MOUT_I2S>,
@@ -361,6 +444,22 @@
        cap-sd-highspeed;
 };
 
+&nocp_mem0_0 {
+       status = "okay";
+};
+
+&nocp_mem0_1 {
+       status = "okay";
+};
+
+&nocp_mem1_0 {
+       status = "okay";
+};
+
+&nocp_mem1_1 {
+       status = "okay";
+};
+
 &pinctrl_0 {
        hdmi_hpd_irq: hdmi-hpd-irq {
                samsung,pins = "gpx3-7";