Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*****************************************************************************/ |
2 | ||
3 | /* | |
4 | * istallion.c -- stallion intelligent multiport serial driver. | |
5 | * | |
6 | * Copyright (C) 1996-1999 Stallion Technologies | |
7 | * Copyright (C) 1994-1996 Greg Ungerer. | |
8 | * | |
9 | * This code is loosely based on the Linux serial driver, written by | |
10 | * Linus Torvalds, Theodore T'so and others. | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2 of the License, or | |
15 | * (at your option) any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; if not, write to the Free Software | |
24 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
25 | */ | |
26 | ||
27 | /*****************************************************************************/ | |
28 | ||
29 | #include <linux/config.h> | |
30 | #include <linux/module.h> | |
31 | #include <linux/slab.h> | |
32 | #include <linux/interrupt.h> | |
33 | #include <linux/tty.h> | |
34 | #include <linux/tty_flip.h> | |
35 | #include <linux/serial.h> | |
36 | #include <linux/cdk.h> | |
37 | #include <linux/comstats.h> | |
38 | #include <linux/istallion.h> | |
39 | #include <linux/ioport.h> | |
40 | #include <linux/delay.h> | |
41 | #include <linux/init.h> | |
42 | #include <linux/devfs_fs_kernel.h> | |
43 | #include <linux/device.h> | |
44 | #include <linux/wait.h> | |
45 | ||
46 | #include <asm/io.h> | |
47 | #include <asm/uaccess.h> | |
48 | ||
49 | #ifdef CONFIG_PCI | |
50 | #include <linux/pci.h> | |
51 | #endif | |
52 | ||
53 | /*****************************************************************************/ | |
54 | ||
55 | /* | |
56 | * Define different board types. Not all of the following board types | |
57 | * are supported by this driver. But I will use the standard "assigned" | |
58 | * board numbers. Currently supported boards are abbreviated as: | |
59 | * ECP = EasyConnection 8/64, ONB = ONboard, BBY = Brumby and | |
60 | * STAL = Stallion. | |
61 | */ | |
62 | #define BRD_UNKNOWN 0 | |
63 | #define BRD_STALLION 1 | |
64 | #define BRD_BRUMBY4 2 | |
65 | #define BRD_ONBOARD2 3 | |
66 | #define BRD_ONBOARD 4 | |
67 | #define BRD_BRUMBY8 5 | |
68 | #define BRD_BRUMBY16 6 | |
69 | #define BRD_ONBOARDE 7 | |
70 | #define BRD_ONBOARD32 9 | |
71 | #define BRD_ONBOARD2_32 10 | |
72 | #define BRD_ONBOARDRS 11 | |
73 | #define BRD_EASYIO 20 | |
74 | #define BRD_ECH 21 | |
75 | #define BRD_ECHMC 22 | |
76 | #define BRD_ECP 23 | |
77 | #define BRD_ECPE 24 | |
78 | #define BRD_ECPMC 25 | |
79 | #define BRD_ECHPCI 26 | |
80 | #define BRD_ECH64PCI 27 | |
81 | #define BRD_EASYIOPCI 28 | |
82 | #define BRD_ECPPCI 29 | |
83 | ||
84 | #define BRD_BRUMBY BRD_BRUMBY4 | |
85 | ||
86 | /* | |
87 | * Define a configuration structure to hold the board configuration. | |
88 | * Need to set this up in the code (for now) with the boards that are | |
89 | * to be configured into the system. This is what needs to be modified | |
90 | * when adding/removing/modifying boards. Each line entry in the | |
91 | * stli_brdconf[] array is a board. Each line contains io/irq/memory | |
92 | * ranges for that board (as well as what type of board it is). | |
93 | * Some examples: | |
94 | * { BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 }, | |
95 | * This line will configure an EasyConnection 8/64 at io address 2a0, | |
96 | * and shared memory address of cc000. Multiple EasyConnection 8/64 | |
97 | * boards can share the same shared memory address space. No interrupt | |
98 | * is required for this board type. | |
99 | * Another example: | |
100 | * { BRD_ECPE, 0x5000, 0, 0x80000000, 0, 0 }, | |
101 | * This line will configure an EasyConnection 8/64 EISA in slot 5 and | |
102 | * shared memory address of 0x80000000 (2 GByte). Multiple | |
103 | * EasyConnection 8/64 EISA boards can share the same shared memory | |
104 | * address space. No interrupt is required for this board type. | |
105 | * Another example: | |
106 | * { BRD_ONBOARD, 0x240, 0, 0xd0000, 0, 0 }, | |
107 | * This line will configure an ONboard (ISA type) at io address 240, | |
108 | * and shared memory address of d0000. Multiple ONboards can share | |
109 | * the same shared memory address space. No interrupt required. | |
110 | * Another example: | |
111 | * { BRD_BRUMBY4, 0x360, 0, 0xc8000, 0, 0 }, | |
112 | * This line will configure a Brumby board (any number of ports!) at | |
113 | * io address 360 and shared memory address of c8000. All Brumby boards | |
114 | * configured into a system must have their own separate io and memory | |
115 | * addresses. No interrupt is required. | |
116 | * Another example: | |
117 | * { BRD_STALLION, 0x330, 0, 0xd0000, 0, 0 }, | |
118 | * This line will configure an original Stallion board at io address 330 | |
119 | * and shared memory address d0000 (this would only be valid for a "V4.0" | |
120 | * or Rev.O Stallion board). All Stallion boards configured into the | |
121 | * system must have their own separate io and memory addresses. No | |
122 | * interrupt is required. | |
123 | */ | |
124 | ||
125 | typedef struct { | |
126 | int brdtype; | |
127 | int ioaddr1; | |
128 | int ioaddr2; | |
129 | unsigned long memaddr; | |
130 | int irq; | |
131 | int irqtype; | |
132 | } stlconf_t; | |
133 | ||
134 | static stlconf_t stli_brdconf[] = { | |
135 | /*{ BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },*/ | |
136 | }; | |
137 | ||
fe971071 | 138 | static int stli_nrbrds = ARRAY_SIZE(stli_brdconf); |
1da177e4 LT |
139 | |
140 | /* | |
141 | * There is some experimental EISA board detection code in this driver. | |
142 | * By default it is disabled, but for those that want to try it out, | |
143 | * then set the define below to be 1. | |
144 | */ | |
145 | #define STLI_EISAPROBE 0 | |
146 | ||
147 | /*****************************************************************************/ | |
148 | ||
149 | /* | |
150 | * Define some important driver characteristics. Device major numbers | |
151 | * allocated as per Linux Device Registry. | |
152 | */ | |
153 | #ifndef STL_SIOMEMMAJOR | |
154 | #define STL_SIOMEMMAJOR 28 | |
155 | #endif | |
156 | #ifndef STL_SERIALMAJOR | |
157 | #define STL_SERIALMAJOR 24 | |
158 | #endif | |
159 | #ifndef STL_CALLOUTMAJOR | |
160 | #define STL_CALLOUTMAJOR 25 | |
161 | #endif | |
162 | ||
163 | /*****************************************************************************/ | |
164 | ||
165 | /* | |
166 | * Define our local driver identity first. Set up stuff to deal with | |
167 | * all the local structures required by a serial tty driver. | |
168 | */ | |
169 | static char *stli_drvtitle = "Stallion Intelligent Multiport Serial Driver"; | |
170 | static char *stli_drvname = "istallion"; | |
171 | static char *stli_drvversion = "5.6.0"; | |
172 | static char *stli_serialname = "ttyE"; | |
173 | ||
174 | static struct tty_driver *stli_serial; | |
175 | ||
176 | /* | |
177 | * We will need to allocate a temporary write buffer for chars that | |
178 | * come direct from user space. The problem is that a copy from user | |
179 | * space might cause a page fault (typically on a system that is | |
180 | * swapping!). All ports will share one buffer - since if the system | |
181 | * is already swapping a shared buffer won't make things any worse. | |
182 | */ | |
183 | static char *stli_tmpwritebuf; | |
1da177e4 LT |
184 | |
185 | #define STLI_TXBUFSIZE 4096 | |
186 | ||
187 | /* | |
188 | * Use a fast local buffer for cooked characters. Typically a whole | |
189 | * bunch of cooked characters come in for a port, 1 at a time. So we | |
190 | * save those up into a local buffer, then write out the whole lot | |
191 | * with a large memcpy. Just use 1 buffer for all ports, since its | |
192 | * use it is only need for short periods of time by each port. | |
193 | */ | |
194 | static char *stli_txcookbuf; | |
195 | static int stli_txcooksize; | |
196 | static int stli_txcookrealsize; | |
197 | static struct tty_struct *stli_txcooktty; | |
198 | ||
199 | /* | |
200 | * Define a local default termios struct. All ports will be created | |
201 | * with this termios initially. Basically all it defines is a raw port | |
202 | * at 9600 baud, 8 data bits, no parity, 1 stop bit. | |
203 | */ | |
204 | static struct termios stli_deftermios = { | |
205 | .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), | |
206 | .c_cc = INIT_C_CC, | |
207 | }; | |
208 | ||
209 | /* | |
210 | * Define global stats structures. Not used often, and can be | |
211 | * re-used for each stats call. | |
212 | */ | |
213 | static comstats_t stli_comstats; | |
214 | static combrd_t stli_brdstats; | |
215 | static asystats_t stli_cdkstats; | |
216 | static stlibrd_t stli_dummybrd; | |
217 | static stliport_t stli_dummyport; | |
218 | ||
219 | /*****************************************************************************/ | |
220 | ||
221 | static stlibrd_t *stli_brds[STL_MAXBRDS]; | |
222 | ||
223 | static int stli_shared; | |
224 | ||
225 | /* | |
226 | * Per board state flags. Used with the state field of the board struct. | |
227 | * Not really much here... All we need to do is keep track of whether | |
228 | * the board has been detected, and whether it is actually running a slave | |
229 | * or not. | |
230 | */ | |
231 | #define BST_FOUND 0x1 | |
232 | #define BST_STARTED 0x2 | |
233 | ||
234 | /* | |
235 | * Define the set of port state flags. These are marked for internal | |
236 | * state purposes only, usually to do with the state of communications | |
237 | * with the slave. Most of them need to be updated atomically, so always | |
238 | * use the bit setting operations (unless protected by cli/sti). | |
239 | */ | |
240 | #define ST_INITIALIZING 1 | |
241 | #define ST_OPENING 2 | |
242 | #define ST_CLOSING 3 | |
243 | #define ST_CMDING 4 | |
244 | #define ST_TXBUSY 5 | |
245 | #define ST_RXING 6 | |
246 | #define ST_DOFLUSHRX 7 | |
247 | #define ST_DOFLUSHTX 8 | |
248 | #define ST_DOSIGS 9 | |
249 | #define ST_RXSTOP 10 | |
250 | #define ST_GETSIGS 11 | |
251 | ||
252 | /* | |
253 | * Define an array of board names as printable strings. Handy for | |
254 | * referencing boards when printing trace and stuff. | |
255 | */ | |
256 | static char *stli_brdnames[] = { | |
257 | "Unknown", | |
258 | "Stallion", | |
259 | "Brumby", | |
260 | "ONboard-MC", | |
261 | "ONboard", | |
262 | "Brumby", | |
263 | "Brumby", | |
264 | "ONboard-EI", | |
265 | (char *) NULL, | |
266 | "ONboard", | |
267 | "ONboard-MC", | |
268 | "ONboard-MC", | |
269 | (char *) NULL, | |
270 | (char *) NULL, | |
271 | (char *) NULL, | |
272 | (char *) NULL, | |
273 | (char *) NULL, | |
274 | (char *) NULL, | |
275 | (char *) NULL, | |
276 | (char *) NULL, | |
277 | "EasyIO", | |
278 | "EC8/32-AT", | |
279 | "EC8/32-MC", | |
280 | "EC8/64-AT", | |
281 | "EC8/64-EI", | |
282 | "EC8/64-MC", | |
283 | "EC8/32-PCI", | |
284 | "EC8/64-PCI", | |
285 | "EasyIO-PCI", | |
286 | "EC/RA-PCI", | |
287 | }; | |
288 | ||
289 | /*****************************************************************************/ | |
290 | ||
291 | #ifdef MODULE | |
292 | /* | |
293 | * Define some string labels for arguments passed from the module | |
294 | * load line. These allow for easy board definitions, and easy | |
295 | * modification of the io, memory and irq resoucres. | |
296 | */ | |
297 | ||
298 | static char *board0[8]; | |
299 | static char *board1[8]; | |
300 | static char *board2[8]; | |
301 | static char *board3[8]; | |
302 | ||
303 | static char **stli_brdsp[] = { | |
304 | (char **) &board0, | |
305 | (char **) &board1, | |
306 | (char **) &board2, | |
307 | (char **) &board3 | |
308 | }; | |
309 | ||
310 | /* | |
311 | * Define a set of common board names, and types. This is used to | |
312 | * parse any module arguments. | |
313 | */ | |
314 | ||
315 | typedef struct stlibrdtype { | |
316 | char *name; | |
317 | int type; | |
318 | } stlibrdtype_t; | |
319 | ||
320 | static stlibrdtype_t stli_brdstr[] = { | |
321 | { "stallion", BRD_STALLION }, | |
322 | { "1", BRD_STALLION }, | |
323 | { "brumby", BRD_BRUMBY }, | |
324 | { "brumby4", BRD_BRUMBY }, | |
325 | { "brumby/4", BRD_BRUMBY }, | |
326 | { "brumby-4", BRD_BRUMBY }, | |
327 | { "brumby8", BRD_BRUMBY }, | |
328 | { "brumby/8", BRD_BRUMBY }, | |
329 | { "brumby-8", BRD_BRUMBY }, | |
330 | { "brumby16", BRD_BRUMBY }, | |
331 | { "brumby/16", BRD_BRUMBY }, | |
332 | { "brumby-16", BRD_BRUMBY }, | |
333 | { "2", BRD_BRUMBY }, | |
334 | { "onboard2", BRD_ONBOARD2 }, | |
335 | { "onboard-2", BRD_ONBOARD2 }, | |
336 | { "onboard/2", BRD_ONBOARD2 }, | |
337 | { "onboard-mc", BRD_ONBOARD2 }, | |
338 | { "onboard/mc", BRD_ONBOARD2 }, | |
339 | { "onboard-mca", BRD_ONBOARD2 }, | |
340 | { "onboard/mca", BRD_ONBOARD2 }, | |
341 | { "3", BRD_ONBOARD2 }, | |
342 | { "onboard", BRD_ONBOARD }, | |
343 | { "onboardat", BRD_ONBOARD }, | |
344 | { "4", BRD_ONBOARD }, | |
345 | { "onboarde", BRD_ONBOARDE }, | |
346 | { "onboard-e", BRD_ONBOARDE }, | |
347 | { "onboard/e", BRD_ONBOARDE }, | |
348 | { "onboard-ei", BRD_ONBOARDE }, | |
349 | { "onboard/ei", BRD_ONBOARDE }, | |
350 | { "7", BRD_ONBOARDE }, | |
351 | { "ecp", BRD_ECP }, | |
352 | { "ecpat", BRD_ECP }, | |
353 | { "ec8/64", BRD_ECP }, | |
354 | { "ec8/64-at", BRD_ECP }, | |
355 | { "ec8/64-isa", BRD_ECP }, | |
356 | { "23", BRD_ECP }, | |
357 | { "ecpe", BRD_ECPE }, | |
358 | { "ecpei", BRD_ECPE }, | |
359 | { "ec8/64-e", BRD_ECPE }, | |
360 | { "ec8/64-ei", BRD_ECPE }, | |
361 | { "24", BRD_ECPE }, | |
362 | { "ecpmc", BRD_ECPMC }, | |
363 | { "ec8/64-mc", BRD_ECPMC }, | |
364 | { "ec8/64-mca", BRD_ECPMC }, | |
365 | { "25", BRD_ECPMC }, | |
366 | { "ecppci", BRD_ECPPCI }, | |
367 | { "ec/ra", BRD_ECPPCI }, | |
368 | { "ec/ra-pc", BRD_ECPPCI }, | |
369 | { "ec/ra-pci", BRD_ECPPCI }, | |
370 | { "29", BRD_ECPPCI }, | |
371 | }; | |
372 | ||
373 | /* | |
374 | * Define the module agruments. | |
375 | */ | |
376 | MODULE_AUTHOR("Greg Ungerer"); | |
377 | MODULE_DESCRIPTION("Stallion Intelligent Multiport Serial Driver"); | |
378 | MODULE_LICENSE("GPL"); | |
379 | ||
380 | ||
8d3b33f6 | 381 | module_param_array(board0, charp, NULL, 0); |
1da177e4 | 382 | MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]"); |
8d3b33f6 | 383 | module_param_array(board1, charp, NULL, 0); |
1da177e4 | 384 | MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]"); |
8d3b33f6 | 385 | module_param_array(board2, charp, NULL, 0); |
1da177e4 | 386 | MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]"); |
8d3b33f6 | 387 | module_param_array(board3, charp, NULL, 0); |
1da177e4 LT |
388 | MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]"); |
389 | ||
390 | #endif | |
391 | ||
392 | /* | |
393 | * Set up a default memory address table for EISA board probing. | |
394 | * The default addresses are all bellow 1Mbyte, which has to be the | |
395 | * case anyway. They should be safe, since we only read values from | |
396 | * them, and interrupts are disabled while we do it. If the higher | |
397 | * memory support is compiled in then we also try probing around | |
398 | * the 1Gb, 2Gb and 3Gb areas as well... | |
399 | */ | |
400 | static unsigned long stli_eisamemprobeaddrs[] = { | |
401 | 0xc0000, 0xd0000, 0xe0000, 0xf0000, | |
402 | 0x80000000, 0x80010000, 0x80020000, 0x80030000, | |
403 | 0x40000000, 0x40010000, 0x40020000, 0x40030000, | |
404 | 0xc0000000, 0xc0010000, 0xc0020000, 0xc0030000, | |
405 | 0xff000000, 0xff010000, 0xff020000, 0xff030000, | |
406 | }; | |
407 | ||
fe971071 | 408 | static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs); |
1da177e4 LT |
409 | |
410 | /* | |
411 | * Define the Stallion PCI vendor and device IDs. | |
412 | */ | |
413 | #ifdef CONFIG_PCI | |
414 | #ifndef PCI_VENDOR_ID_STALLION | |
415 | #define PCI_VENDOR_ID_STALLION 0x124d | |
416 | #endif | |
417 | #ifndef PCI_DEVICE_ID_ECRA | |
418 | #define PCI_DEVICE_ID_ECRA 0x0004 | |
419 | #endif | |
420 | ||
421 | static struct pci_device_id istallion_pci_tbl[] = { | |
422 | { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
423 | { 0 } | |
424 | }; | |
425 | MODULE_DEVICE_TABLE(pci, istallion_pci_tbl); | |
426 | ||
427 | #endif /* CONFIG_PCI */ | |
428 | ||
429 | /*****************************************************************************/ | |
430 | ||
431 | /* | |
432 | * Hardware configuration info for ECP boards. These defines apply | |
433 | * to the directly accessible io ports of the ECP. There is a set of | |
434 | * defines for each ECP board type, ISA, EISA, MCA and PCI. | |
435 | */ | |
436 | #define ECP_IOSIZE 4 | |
437 | ||
438 | #define ECP_MEMSIZE (128 * 1024) | |
439 | #define ECP_PCIMEMSIZE (256 * 1024) | |
440 | ||
441 | #define ECP_ATPAGESIZE (4 * 1024) | |
442 | #define ECP_MCPAGESIZE (4 * 1024) | |
443 | #define ECP_EIPAGESIZE (64 * 1024) | |
444 | #define ECP_PCIPAGESIZE (64 * 1024) | |
445 | ||
446 | #define STL_EISAID 0x8c4e | |
447 | ||
448 | /* | |
449 | * Important defines for the ISA class of ECP board. | |
450 | */ | |
451 | #define ECP_ATIREG 0 | |
452 | #define ECP_ATCONFR 1 | |
453 | #define ECP_ATMEMAR 2 | |
454 | #define ECP_ATMEMPR 3 | |
455 | #define ECP_ATSTOP 0x1 | |
456 | #define ECP_ATINTENAB 0x10 | |
457 | #define ECP_ATENABLE 0x20 | |
458 | #define ECP_ATDISABLE 0x00 | |
459 | #define ECP_ATADDRMASK 0x3f000 | |
460 | #define ECP_ATADDRSHFT 12 | |
461 | ||
462 | /* | |
463 | * Important defines for the EISA class of ECP board. | |
464 | */ | |
465 | #define ECP_EIIREG 0 | |
466 | #define ECP_EIMEMARL 1 | |
467 | #define ECP_EICONFR 2 | |
468 | #define ECP_EIMEMARH 3 | |
469 | #define ECP_EIENABLE 0x1 | |
470 | #define ECP_EIDISABLE 0x0 | |
471 | #define ECP_EISTOP 0x4 | |
472 | #define ECP_EIEDGE 0x00 | |
473 | #define ECP_EILEVEL 0x80 | |
474 | #define ECP_EIADDRMASKL 0x00ff0000 | |
475 | #define ECP_EIADDRSHFTL 16 | |
476 | #define ECP_EIADDRMASKH 0xff000000 | |
477 | #define ECP_EIADDRSHFTH 24 | |
478 | #define ECP_EIBRDENAB 0xc84 | |
479 | ||
480 | #define ECP_EISAID 0x4 | |
481 | ||
482 | /* | |
483 | * Important defines for the Micro-channel class of ECP board. | |
484 | * (It has a lot in common with the ISA boards.) | |
485 | */ | |
486 | #define ECP_MCIREG 0 | |
487 | #define ECP_MCCONFR 1 | |
488 | #define ECP_MCSTOP 0x20 | |
489 | #define ECP_MCENABLE 0x80 | |
490 | #define ECP_MCDISABLE 0x00 | |
491 | ||
492 | /* | |
493 | * Important defines for the PCI class of ECP board. | |
494 | * (It has a lot in common with the other ECP boards.) | |
495 | */ | |
496 | #define ECP_PCIIREG 0 | |
497 | #define ECP_PCICONFR 1 | |
498 | #define ECP_PCISTOP 0x01 | |
499 | ||
500 | /* | |
501 | * Hardware configuration info for ONboard and Brumby boards. These | |
502 | * defines apply to the directly accessible io ports of these boards. | |
503 | */ | |
504 | #define ONB_IOSIZE 16 | |
505 | #define ONB_MEMSIZE (64 * 1024) | |
506 | #define ONB_ATPAGESIZE (64 * 1024) | |
507 | #define ONB_MCPAGESIZE (64 * 1024) | |
508 | #define ONB_EIMEMSIZE (128 * 1024) | |
509 | #define ONB_EIPAGESIZE (64 * 1024) | |
510 | ||
511 | /* | |
512 | * Important defines for the ISA class of ONboard board. | |
513 | */ | |
514 | #define ONB_ATIREG 0 | |
515 | #define ONB_ATMEMAR 1 | |
516 | #define ONB_ATCONFR 2 | |
517 | #define ONB_ATSTOP 0x4 | |
518 | #define ONB_ATENABLE 0x01 | |
519 | #define ONB_ATDISABLE 0x00 | |
520 | #define ONB_ATADDRMASK 0xff0000 | |
521 | #define ONB_ATADDRSHFT 16 | |
522 | ||
523 | #define ONB_MEMENABLO 0 | |
524 | #define ONB_MEMENABHI 0x02 | |
525 | ||
526 | /* | |
527 | * Important defines for the EISA class of ONboard board. | |
528 | */ | |
529 | #define ONB_EIIREG 0 | |
530 | #define ONB_EIMEMARL 1 | |
531 | #define ONB_EICONFR 2 | |
532 | #define ONB_EIMEMARH 3 | |
533 | #define ONB_EIENABLE 0x1 | |
534 | #define ONB_EIDISABLE 0x0 | |
535 | #define ONB_EISTOP 0x4 | |
536 | #define ONB_EIEDGE 0x00 | |
537 | #define ONB_EILEVEL 0x80 | |
538 | #define ONB_EIADDRMASKL 0x00ff0000 | |
539 | #define ONB_EIADDRSHFTL 16 | |
540 | #define ONB_EIADDRMASKH 0xff000000 | |
541 | #define ONB_EIADDRSHFTH 24 | |
542 | #define ONB_EIBRDENAB 0xc84 | |
543 | ||
544 | #define ONB_EISAID 0x1 | |
545 | ||
546 | /* | |
547 | * Important defines for the Brumby boards. They are pretty simple, | |
548 | * there is not much that is programmably configurable. | |
549 | */ | |
550 | #define BBY_IOSIZE 16 | |
551 | #define BBY_MEMSIZE (64 * 1024) | |
552 | #define BBY_PAGESIZE (16 * 1024) | |
553 | ||
554 | #define BBY_ATIREG 0 | |
555 | #define BBY_ATCONFR 1 | |
556 | #define BBY_ATSTOP 0x4 | |
557 | ||
558 | /* | |
559 | * Important defines for the Stallion boards. They are pretty simple, | |
560 | * there is not much that is programmably configurable. | |
561 | */ | |
562 | #define STAL_IOSIZE 16 | |
563 | #define STAL_MEMSIZE (64 * 1024) | |
564 | #define STAL_PAGESIZE (64 * 1024) | |
565 | ||
566 | /* | |
567 | * Define the set of status register values for EasyConnection panels. | |
568 | * The signature will return with the status value for each panel. From | |
569 | * this we can determine what is attached to the board - before we have | |
570 | * actually down loaded any code to it. | |
571 | */ | |
572 | #define ECH_PNLSTATUS 2 | |
573 | #define ECH_PNL16PORT 0x20 | |
574 | #define ECH_PNLIDMASK 0x07 | |
575 | #define ECH_PNLXPID 0x40 | |
576 | #define ECH_PNLINTRPEND 0x80 | |
577 | ||
578 | /* | |
579 | * Define some macros to do things to the board. Even those these boards | |
580 | * are somewhat related there is often significantly different ways of | |
581 | * doing some operation on it (like enable, paging, reset, etc). So each | |
582 | * board class has a set of functions which do the commonly required | |
583 | * operations. The macros below basically just call these functions, | |
584 | * generally checking for a NULL function - which means that the board | |
585 | * needs nothing done to it to achieve this operation! | |
586 | */ | |
587 | #define EBRDINIT(brdp) \ | |
588 | if (brdp->init != NULL) \ | |
589 | (* brdp->init)(brdp) | |
590 | ||
591 | #define EBRDENABLE(brdp) \ | |
592 | if (brdp->enable != NULL) \ | |
593 | (* brdp->enable)(brdp); | |
594 | ||
595 | #define EBRDDISABLE(brdp) \ | |
596 | if (brdp->disable != NULL) \ | |
597 | (* brdp->disable)(brdp); | |
598 | ||
599 | #define EBRDINTR(brdp) \ | |
600 | if (brdp->intr != NULL) \ | |
601 | (* brdp->intr)(brdp); | |
602 | ||
603 | #define EBRDRESET(brdp) \ | |
604 | if (brdp->reset != NULL) \ | |
605 | (* brdp->reset)(brdp); | |
606 | ||
607 | #define EBRDGETMEMPTR(brdp,offset) \ | |
608 | (* brdp->getmemptr)(brdp, offset, __LINE__) | |
609 | ||
610 | /* | |
611 | * Define the maximal baud rate, and the default baud base for ports. | |
612 | */ | |
613 | #define STL_MAXBAUD 460800 | |
614 | #define STL_BAUDBASE 115200 | |
615 | #define STL_CLOSEDELAY (5 * HZ / 10) | |
616 | ||
617 | /*****************************************************************************/ | |
618 | ||
619 | /* | |
620 | * Define macros to extract a brd or port number from a minor number. | |
621 | */ | |
622 | #define MINOR2BRD(min) (((min) & 0xc0) >> 6) | |
623 | #define MINOR2PORT(min) ((min) & 0x3f) | |
624 | ||
625 | /* | |
626 | * Define a baud rate table that converts termios baud rate selector | |
627 | * into the actual baud rate value. All baud rate calculations are based | |
628 | * on the actual baud rate required. | |
629 | */ | |
630 | static unsigned int stli_baudrates[] = { | |
631 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, | |
632 | 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 | |
633 | }; | |
634 | ||
635 | /*****************************************************************************/ | |
636 | ||
637 | /* | |
638 | * Define some handy local macros... | |
639 | */ | |
640 | #undef MIN | |
641 | #define MIN(a,b) (((a) <= (b)) ? (a) : (b)) | |
642 | ||
643 | #undef TOLOWER | |
644 | #define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x)) | |
645 | ||
646 | /*****************************************************************************/ | |
647 | ||
648 | /* | |
649 | * Prototype all functions in this driver! | |
650 | */ | |
651 | ||
652 | #ifdef MODULE | |
653 | static void stli_argbrds(void); | |
654 | static int stli_parsebrd(stlconf_t *confp, char **argp); | |
655 | ||
656 | static unsigned long stli_atol(char *str); | |
657 | #endif | |
658 | ||
659 | int stli_init(void); | |
660 | static int stli_open(struct tty_struct *tty, struct file *filp); | |
661 | static void stli_close(struct tty_struct *tty, struct file *filp); | |
662 | static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count); | |
663 | static void stli_putchar(struct tty_struct *tty, unsigned char ch); | |
664 | static void stli_flushchars(struct tty_struct *tty); | |
665 | static int stli_writeroom(struct tty_struct *tty); | |
666 | static int stli_charsinbuffer(struct tty_struct *tty); | |
667 | static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); | |
668 | static void stli_settermios(struct tty_struct *tty, struct termios *old); | |
669 | static void stli_throttle(struct tty_struct *tty); | |
670 | static void stli_unthrottle(struct tty_struct *tty); | |
671 | static void stli_stop(struct tty_struct *tty); | |
672 | static void stli_start(struct tty_struct *tty); | |
673 | static void stli_flushbuffer(struct tty_struct *tty); | |
674 | static void stli_breakctl(struct tty_struct *tty, int state); | |
675 | static void stli_waituntilsent(struct tty_struct *tty, int timeout); | |
676 | static void stli_sendxchar(struct tty_struct *tty, char ch); | |
677 | static void stli_hangup(struct tty_struct *tty); | |
678 | static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos); | |
679 | ||
680 | static int stli_brdinit(stlibrd_t *brdp); | |
681 | static int stli_startbrd(stlibrd_t *brdp); | |
682 | static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); | |
683 | static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); | |
684 | static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); | |
685 | static void stli_brdpoll(stlibrd_t *brdp, volatile cdkhdr_t *hdrp); | |
686 | static void stli_poll(unsigned long arg); | |
687 | static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp); | |
688 | static int stli_initopen(stlibrd_t *brdp, stliport_t *portp); | |
689 | static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait); | |
690 | static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait); | |
691 | static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp); | |
692 | static void stli_dohangup(void *arg); | |
693 | static int stli_setport(stliport_t *portp); | |
694 | static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback); | |
695 | static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback); | |
696 | static void stli_dodelaycmd(stliport_t *portp, volatile cdkctrl_t *cp); | |
697 | static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp); | |
698 | static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts); | |
699 | static long stli_mktiocm(unsigned long sigvalue); | |
700 | static void stli_read(stlibrd_t *brdp, stliport_t *portp); | |
701 | static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp); | |
702 | static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp); | |
703 | static int stli_getbrdstats(combrd_t __user *bp); | |
704 | static int stli_getportstats(stliport_t *portp, comstats_t __user *cp); | |
705 | static int stli_portcmdstats(stliport_t *portp); | |
706 | static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp); | |
707 | static int stli_getportstruct(stliport_t __user *arg); | |
708 | static int stli_getbrdstruct(stlibrd_t __user *arg); | |
1da177e4 LT |
709 | static stlibrd_t *stli_allocbrd(void); |
710 | ||
711 | static void stli_ecpinit(stlibrd_t *brdp); | |
712 | static void stli_ecpenable(stlibrd_t *brdp); | |
713 | static void stli_ecpdisable(stlibrd_t *brdp); | |
714 | static char *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
715 | static void stli_ecpreset(stlibrd_t *brdp); | |
716 | static void stli_ecpintr(stlibrd_t *brdp); | |
717 | static void stli_ecpeiinit(stlibrd_t *brdp); | |
718 | static void stli_ecpeienable(stlibrd_t *brdp); | |
719 | static void stli_ecpeidisable(stlibrd_t *brdp); | |
720 | static char *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
721 | static void stli_ecpeireset(stlibrd_t *brdp); | |
722 | static void stli_ecpmcenable(stlibrd_t *brdp); | |
723 | static void stli_ecpmcdisable(stlibrd_t *brdp); | |
724 | static char *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
725 | static void stli_ecpmcreset(stlibrd_t *brdp); | |
726 | static void stli_ecppciinit(stlibrd_t *brdp); | |
727 | static char *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
728 | static void stli_ecppcireset(stlibrd_t *brdp); | |
729 | ||
730 | static void stli_onbinit(stlibrd_t *brdp); | |
731 | static void stli_onbenable(stlibrd_t *brdp); | |
732 | static void stli_onbdisable(stlibrd_t *brdp); | |
733 | static char *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
734 | static void stli_onbreset(stlibrd_t *brdp); | |
735 | static void stli_onbeinit(stlibrd_t *brdp); | |
736 | static void stli_onbeenable(stlibrd_t *brdp); | |
737 | static void stli_onbedisable(stlibrd_t *brdp); | |
738 | static char *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
739 | static void stli_onbereset(stlibrd_t *brdp); | |
740 | static void stli_bbyinit(stlibrd_t *brdp); | |
741 | static char *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
742 | static void stli_bbyreset(stlibrd_t *brdp); | |
743 | static void stli_stalinit(stlibrd_t *brdp); | |
744 | static char *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); | |
745 | static void stli_stalreset(stlibrd_t *brdp); | |
746 | ||
747 | static stliport_t *stli_getport(int brdnr, int panelnr, int portnr); | |
748 | ||
749 | static int stli_initecp(stlibrd_t *brdp); | |
750 | static int stli_initonb(stlibrd_t *brdp); | |
751 | static int stli_eisamemprobe(stlibrd_t *brdp); | |
752 | static int stli_initports(stlibrd_t *brdp); | |
753 | ||
754 | #ifdef CONFIG_PCI | |
755 | static int stli_initpcibrd(int brdtype, struct pci_dev *devp); | |
756 | #endif | |
757 | ||
758 | /*****************************************************************************/ | |
759 | ||
760 | /* | |
761 | * Define the driver info for a user level shared memory device. This | |
762 | * device will work sort of like the /dev/kmem device - except that it | |
763 | * will give access to the shared memory on the Stallion intelligent | |
764 | * board. This is also a very useful debugging tool. | |
765 | */ | |
766 | static struct file_operations stli_fsiomem = { | |
767 | .owner = THIS_MODULE, | |
768 | .read = stli_memread, | |
769 | .write = stli_memwrite, | |
770 | .ioctl = stli_memioctl, | |
771 | }; | |
772 | ||
773 | /*****************************************************************************/ | |
774 | ||
775 | /* | |
776 | * Define a timer_list entry for our poll routine. The slave board | |
777 | * is polled every so often to see if anything needs doing. This is | |
778 | * much cheaper on host cpu than using interrupts. It turns out to | |
779 | * not increase character latency by much either... | |
780 | */ | |
8d06afab | 781 | static DEFINE_TIMER(stli_timerlist, stli_poll, 0, 0); |
1da177e4 LT |
782 | |
783 | static int stli_timeron; | |
784 | ||
785 | /* | |
786 | * Define the calculation for the timeout routine. | |
787 | */ | |
788 | #define STLI_TIMEOUT (jiffies + 1) | |
789 | ||
790 | /*****************************************************************************/ | |
791 | ||
ca8eca68 | 792 | static struct class *istallion_class; |
1da177e4 LT |
793 | |
794 | #ifdef MODULE | |
795 | ||
796 | /* | |
797 | * Loadable module initialization stuff. | |
798 | */ | |
799 | ||
800 | static int __init istallion_module_init(void) | |
801 | { | |
802 | unsigned long flags; | |
803 | ||
804 | #ifdef DEBUG | |
805 | printk("init_module()\n"); | |
806 | #endif | |
807 | ||
808 | save_flags(flags); | |
809 | cli(); | |
810 | stli_init(); | |
811 | restore_flags(flags); | |
812 | ||
813 | return(0); | |
814 | } | |
815 | ||
816 | /*****************************************************************************/ | |
817 | ||
818 | static void __exit istallion_module_exit(void) | |
819 | { | |
820 | stlibrd_t *brdp; | |
821 | stliport_t *portp; | |
822 | unsigned long flags; | |
823 | int i, j; | |
824 | ||
825 | #ifdef DEBUG | |
826 | printk("cleanup_module()\n"); | |
827 | #endif | |
828 | ||
829 | printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle, | |
830 | stli_drvversion); | |
831 | ||
832 | save_flags(flags); | |
833 | cli(); | |
834 | ||
835 | /* | |
836 | * Free up all allocated resources used by the ports. This includes | |
837 | * memory and interrupts. | |
838 | */ | |
839 | if (stli_timeron) { | |
840 | stli_timeron = 0; | |
841 | del_timer(&stli_timerlist); | |
842 | } | |
843 | ||
844 | i = tty_unregister_driver(stli_serial); | |
845 | if (i) { | |
846 | printk("STALLION: failed to un-register tty driver, " | |
847 | "errno=%d\n", -i); | |
848 | restore_flags(flags); | |
849 | return; | |
850 | } | |
851 | put_tty_driver(stli_serial); | |
852 | for (i = 0; i < 4; i++) { | |
853 | devfs_remove("staliomem/%d", i); | |
ca8eca68 | 854 | class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, i)); |
1da177e4 LT |
855 | } |
856 | devfs_remove("staliomem"); | |
ca8eca68 | 857 | class_destroy(istallion_class); |
1da177e4 LT |
858 | if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"))) |
859 | printk("STALLION: failed to un-register serial memory device, " | |
860 | "errno=%d\n", -i); | |
735d5661 JJ |
861 | |
862 | kfree(stli_tmpwritebuf); | |
863 | kfree(stli_txcookbuf); | |
1da177e4 LT |
864 | |
865 | for (i = 0; (i < stli_nrbrds); i++) { | |
866 | if ((brdp = stli_brds[i]) == (stlibrd_t *) NULL) | |
867 | continue; | |
868 | for (j = 0; (j < STL_MAXPORTS); j++) { | |
869 | portp = brdp->ports[j]; | |
870 | if (portp != (stliport_t *) NULL) { | |
871 | if (portp->tty != (struct tty_struct *) NULL) | |
872 | tty_hangup(portp->tty); | |
873 | kfree(portp); | |
874 | } | |
875 | } | |
876 | ||
877 | iounmap(brdp->membase); | |
878 | if (brdp->iosize > 0) | |
879 | release_region(brdp->iobase, brdp->iosize); | |
880 | kfree(brdp); | |
881 | stli_brds[i] = (stlibrd_t *) NULL; | |
882 | } | |
883 | ||
884 | restore_flags(flags); | |
885 | } | |
886 | ||
887 | module_init(istallion_module_init); | |
888 | module_exit(istallion_module_exit); | |
889 | ||
890 | /*****************************************************************************/ | |
891 | ||
892 | /* | |
893 | * Check for any arguments passed in on the module load command line. | |
894 | */ | |
895 | ||
896 | static void stli_argbrds(void) | |
897 | { | |
898 | stlconf_t conf; | |
899 | stlibrd_t *brdp; | |
fe971071 | 900 | int i; |
1da177e4 LT |
901 | |
902 | #ifdef DEBUG | |
903 | printk("stli_argbrds()\n"); | |
904 | #endif | |
905 | ||
fe971071 | 906 | for (i = stli_nrbrds; i < ARRAY_SIZE(stli_brdsp); i++) { |
1da177e4 LT |
907 | memset(&conf, 0, sizeof(conf)); |
908 | if (stli_parsebrd(&conf, stli_brdsp[i]) == 0) | |
909 | continue; | |
910 | if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL) | |
911 | continue; | |
912 | stli_nrbrds = i + 1; | |
913 | brdp->brdnr = i; | |
914 | brdp->brdtype = conf.brdtype; | |
915 | brdp->iobase = conf.ioaddr1; | |
916 | brdp->memaddr = conf.memaddr; | |
917 | stli_brdinit(brdp); | |
918 | } | |
919 | } | |
920 | ||
921 | /*****************************************************************************/ | |
922 | ||
923 | /* | |
924 | * Convert an ascii string number into an unsigned long. | |
925 | */ | |
926 | ||
927 | static unsigned long stli_atol(char *str) | |
928 | { | |
929 | unsigned long val; | |
930 | int base, c; | |
931 | char *sp; | |
932 | ||
933 | val = 0; | |
934 | sp = str; | |
935 | if ((*sp == '0') && (*(sp+1) == 'x')) { | |
936 | base = 16; | |
937 | sp += 2; | |
938 | } else if (*sp == '0') { | |
939 | base = 8; | |
940 | sp++; | |
941 | } else { | |
942 | base = 10; | |
943 | } | |
944 | ||
945 | for (; (*sp != 0); sp++) { | |
946 | c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0'); | |
947 | if ((c < 0) || (c >= base)) { | |
948 | printk("STALLION: invalid argument %s\n", str); | |
949 | val = 0; | |
950 | break; | |
951 | } | |
952 | val = (val * base) + c; | |
953 | } | |
954 | return(val); | |
955 | } | |
956 | ||
957 | /*****************************************************************************/ | |
958 | ||
959 | /* | |
960 | * Parse the supplied argument string, into the board conf struct. | |
961 | */ | |
962 | ||
963 | static int stli_parsebrd(stlconf_t *confp, char **argp) | |
964 | { | |
965 | char *sp; | |
fe971071 | 966 | int i; |
1da177e4 LT |
967 | |
968 | #ifdef DEBUG | |
969 | printk("stli_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp); | |
970 | #endif | |
971 | ||
972 | if ((argp[0] == (char *) NULL) || (*argp[0] == 0)) | |
973 | return(0); | |
974 | ||
975 | for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) | |
976 | *sp = TOLOWER(*sp); | |
977 | ||
fe971071 | 978 | for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) { |
1da177e4 LT |
979 | if (strcmp(stli_brdstr[i].name, argp[0]) == 0) |
980 | break; | |
981 | } | |
fe971071 | 982 | if (i == ARRAY_SIZE(stli_brdstr)) { |
1da177e4 | 983 | printk("STALLION: unknown board name, %s?\n", argp[0]); |
fe971071 | 984 | return 0; |
1da177e4 LT |
985 | } |
986 | ||
987 | confp->brdtype = stli_brdstr[i].type; | |
988 | if ((argp[1] != (char *) NULL) && (*argp[1] != 0)) | |
989 | confp->ioaddr1 = stli_atol(argp[1]); | |
990 | if ((argp[2] != (char *) NULL) && (*argp[2] != 0)) | |
991 | confp->memaddr = stli_atol(argp[2]); | |
992 | return(1); | |
993 | } | |
994 | ||
995 | #endif | |
996 | ||
997 | /*****************************************************************************/ | |
998 | ||
1da177e4 LT |
999 | static int stli_open(struct tty_struct *tty, struct file *filp) |
1000 | { | |
1001 | stlibrd_t *brdp; | |
1002 | stliport_t *portp; | |
1003 | unsigned int minordev; | |
1004 | int brdnr, portnr, rc; | |
1005 | ||
1006 | #ifdef DEBUG | |
1007 | printk("stli_open(tty=%x,filp=%x): device=%s\n", (int) tty, | |
1008 | (int) filp, tty->name); | |
1009 | #endif | |
1010 | ||
1011 | minordev = tty->index; | |
1012 | brdnr = MINOR2BRD(minordev); | |
1013 | if (brdnr >= stli_nrbrds) | |
1014 | return(-ENODEV); | |
1015 | brdp = stli_brds[brdnr]; | |
1016 | if (brdp == (stlibrd_t *) NULL) | |
1017 | return(-ENODEV); | |
1018 | if ((brdp->state & BST_STARTED) == 0) | |
1019 | return(-ENODEV); | |
1020 | portnr = MINOR2PORT(minordev); | |
1021 | if ((portnr < 0) || (portnr > brdp->nrports)) | |
1022 | return(-ENODEV); | |
1023 | ||
1024 | portp = brdp->ports[portnr]; | |
1025 | if (portp == (stliport_t *) NULL) | |
1026 | return(-ENODEV); | |
1027 | if (portp->devnr < 1) | |
1028 | return(-ENODEV); | |
1029 | ||
1030 | ||
1031 | /* | |
1032 | * Check if this port is in the middle of closing. If so then wait | |
1033 | * until it is closed then return error status based on flag settings. | |
1034 | * The sleep here does not need interrupt protection since the wakeup | |
1035 | * for it is done with the same context. | |
1036 | */ | |
1037 | if (portp->flags & ASYNC_CLOSING) { | |
1038 | interruptible_sleep_on(&portp->close_wait); | |
1039 | if (portp->flags & ASYNC_HUP_NOTIFY) | |
1040 | return(-EAGAIN); | |
1041 | return(-ERESTARTSYS); | |
1042 | } | |
1043 | ||
1044 | /* | |
1045 | * On the first open of the device setup the port hardware, and | |
1046 | * initialize the per port data structure. Since initializing the port | |
1047 | * requires several commands to the board we will need to wait for any | |
1048 | * other open that is already initializing the port. | |
1049 | */ | |
1050 | portp->tty = tty; | |
1051 | tty->driver_data = portp; | |
1052 | portp->refcount++; | |
1053 | ||
1054 | wait_event_interruptible(portp->raw_wait, | |
1055 | !test_bit(ST_INITIALIZING, &portp->state)); | |
1056 | if (signal_pending(current)) | |
1057 | return(-ERESTARTSYS); | |
1058 | ||
1059 | if ((portp->flags & ASYNC_INITIALIZED) == 0) { | |
1060 | set_bit(ST_INITIALIZING, &portp->state); | |
1061 | if ((rc = stli_initopen(brdp, portp)) >= 0) { | |
1062 | portp->flags |= ASYNC_INITIALIZED; | |
1063 | clear_bit(TTY_IO_ERROR, &tty->flags); | |
1064 | } | |
1065 | clear_bit(ST_INITIALIZING, &portp->state); | |
1066 | wake_up_interruptible(&portp->raw_wait); | |
1067 | if (rc < 0) | |
1068 | return(rc); | |
1069 | } | |
1070 | ||
1071 | /* | |
1072 | * Check if this port is in the middle of closing. If so then wait | |
1073 | * until it is closed then return error status, based on flag settings. | |
1074 | * The sleep here does not need interrupt protection since the wakeup | |
1075 | * for it is done with the same context. | |
1076 | */ | |
1077 | if (portp->flags & ASYNC_CLOSING) { | |
1078 | interruptible_sleep_on(&portp->close_wait); | |
1079 | if (portp->flags & ASYNC_HUP_NOTIFY) | |
1080 | return(-EAGAIN); | |
1081 | return(-ERESTARTSYS); | |
1082 | } | |
1083 | ||
1084 | /* | |
1085 | * Based on type of open being done check if it can overlap with any | |
1086 | * previous opens still in effect. If we are a normal serial device | |
1087 | * then also we might have to wait for carrier. | |
1088 | */ | |
1089 | if (!(filp->f_flags & O_NONBLOCK)) { | |
1090 | if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0) | |
1091 | return(rc); | |
1092 | } | |
1093 | portp->flags |= ASYNC_NORMAL_ACTIVE; | |
1094 | return(0); | |
1095 | } | |
1096 | ||
1097 | /*****************************************************************************/ | |
1098 | ||
1099 | static void stli_close(struct tty_struct *tty, struct file *filp) | |
1100 | { | |
1101 | stlibrd_t *brdp; | |
1102 | stliport_t *portp; | |
1103 | unsigned long flags; | |
1104 | ||
1105 | #ifdef DEBUG | |
1106 | printk("stli_close(tty=%x,filp=%x)\n", (int) tty, (int) filp); | |
1107 | #endif | |
1108 | ||
1109 | portp = tty->driver_data; | |
1110 | if (portp == (stliport_t *) NULL) | |
1111 | return; | |
1112 | ||
1113 | save_flags(flags); | |
1114 | cli(); | |
1115 | if (tty_hung_up_p(filp)) { | |
1116 | restore_flags(flags); | |
1117 | return; | |
1118 | } | |
1119 | if ((tty->count == 1) && (portp->refcount != 1)) | |
1120 | portp->refcount = 1; | |
1121 | if (portp->refcount-- > 1) { | |
1122 | restore_flags(flags); | |
1123 | return; | |
1124 | } | |
1125 | ||
1126 | portp->flags |= ASYNC_CLOSING; | |
1127 | ||
1128 | /* | |
1129 | * May want to wait for data to drain before closing. The BUSY flag | |
1130 | * keeps track of whether we are still transmitting or not. It is | |
1131 | * updated by messages from the slave - indicating when all chars | |
1132 | * really have drained. | |
1133 | */ | |
1134 | if (tty == stli_txcooktty) | |
1135 | stli_flushchars(tty); | |
1136 | tty->closing = 1; | |
1137 | if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) | |
1138 | tty_wait_until_sent(tty, portp->closing_wait); | |
1139 | ||
1140 | portp->flags &= ~ASYNC_INITIALIZED; | |
1141 | brdp = stli_brds[portp->brdnr]; | |
1142 | stli_rawclose(brdp, portp, 0, 0); | |
1143 | if (tty->termios->c_cflag & HUPCL) { | |
1144 | stli_mkasysigs(&portp->asig, 0, 0); | |
1145 | if (test_bit(ST_CMDING, &portp->state)) | |
1146 | set_bit(ST_DOSIGS, &portp->state); | |
1147 | else | |
1148 | stli_sendcmd(brdp, portp, A_SETSIGNALS, &portp->asig, | |
1149 | sizeof(asysigs_t), 0); | |
1150 | } | |
1151 | clear_bit(ST_TXBUSY, &portp->state); | |
1152 | clear_bit(ST_RXSTOP, &portp->state); | |
1153 | set_bit(TTY_IO_ERROR, &tty->flags); | |
1154 | if (tty->ldisc.flush_buffer) | |
1155 | (tty->ldisc.flush_buffer)(tty); | |
1156 | set_bit(ST_DOFLUSHRX, &portp->state); | |
1157 | stli_flushbuffer(tty); | |
1158 | ||
1159 | tty->closing = 0; | |
1160 | portp->tty = (struct tty_struct *) NULL; | |
1161 | ||
1162 | if (portp->openwaitcnt) { | |
1163 | if (portp->close_delay) | |
1164 | msleep_interruptible(jiffies_to_msecs(portp->close_delay)); | |
1165 | wake_up_interruptible(&portp->open_wait); | |
1166 | } | |
1167 | ||
1168 | portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | |
1169 | wake_up_interruptible(&portp->close_wait); | |
1170 | restore_flags(flags); | |
1171 | } | |
1172 | ||
1173 | /*****************************************************************************/ | |
1174 | ||
1175 | /* | |
1176 | * Carry out first open operations on a port. This involves a number of | |
1177 | * commands to be sent to the slave. We need to open the port, set the | |
1178 | * notification events, set the initial port settings, get and set the | |
1179 | * initial signal values. We sleep and wait in between each one. But | |
1180 | * this still all happens pretty quickly. | |
1181 | */ | |
1182 | ||
1183 | static int stli_initopen(stlibrd_t *brdp, stliport_t *portp) | |
1184 | { | |
1185 | struct tty_struct *tty; | |
1186 | asynotify_t nt; | |
1187 | asyport_t aport; | |
1188 | int rc; | |
1189 | ||
1190 | #ifdef DEBUG | |
1191 | printk("stli_initopen(brdp=%x,portp=%x)\n", (int) brdp, (int) portp); | |
1192 | #endif | |
1193 | ||
1194 | if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0) | |
1195 | return(rc); | |
1196 | ||
1197 | memset(&nt, 0, sizeof(asynotify_t)); | |
1198 | nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK); | |
1199 | nt.signal = SG_DCD; | |
1200 | if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt, | |
1201 | sizeof(asynotify_t), 0)) < 0) | |
1202 | return(rc); | |
1203 | ||
1204 | tty = portp->tty; | |
1205 | if (tty == (struct tty_struct *) NULL) | |
1206 | return(-ENODEV); | |
1207 | stli_mkasyport(portp, &aport, tty->termios); | |
1208 | if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport, | |
1209 | sizeof(asyport_t), 0)) < 0) | |
1210 | return(rc); | |
1211 | ||
1212 | set_bit(ST_GETSIGS, &portp->state); | |
1213 | if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig, | |
1214 | sizeof(asysigs_t), 1)) < 0) | |
1215 | return(rc); | |
1216 | if (test_and_clear_bit(ST_GETSIGS, &portp->state)) | |
1217 | portp->sigs = stli_mktiocm(portp->asig.sigvalue); | |
1218 | stli_mkasysigs(&portp->asig, 1, 1); | |
1219 | if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, | |
1220 | sizeof(asysigs_t), 0)) < 0) | |
1221 | return(rc); | |
1222 | ||
1223 | return(0); | |
1224 | } | |
1225 | ||
1226 | /*****************************************************************************/ | |
1227 | ||
1228 | /* | |
1229 | * Send an open message to the slave. This will sleep waiting for the | |
1230 | * acknowledgement, so must have user context. We need to co-ordinate | |
1231 | * with close events here, since we don't want open and close events | |
1232 | * to overlap. | |
1233 | */ | |
1234 | ||
1235 | static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait) | |
1236 | { | |
1237 | volatile cdkhdr_t *hdrp; | |
1238 | volatile cdkctrl_t *cp; | |
1239 | volatile unsigned char *bits; | |
1240 | unsigned long flags; | |
1241 | int rc; | |
1242 | ||
1243 | #ifdef DEBUG | |
1244 | printk("stli_rawopen(brdp=%x,portp=%x,arg=%x,wait=%d)\n", | |
1245 | (int) brdp, (int) portp, (int) arg, wait); | |
1246 | #endif | |
1247 | ||
1248 | /* | |
1249 | * Send a message to the slave to open this port. | |
1250 | */ | |
1251 | save_flags(flags); | |
1252 | cli(); | |
1253 | ||
1254 | /* | |
1255 | * Slave is already closing this port. This can happen if a hangup | |
1256 | * occurs on this port. So we must wait until it is complete. The | |
1257 | * order of opens and closes may not be preserved across shared | |
1258 | * memory, so we must wait until it is complete. | |
1259 | */ | |
1260 | wait_event_interruptible(portp->raw_wait, | |
1261 | !test_bit(ST_CLOSING, &portp->state)); | |
1262 | if (signal_pending(current)) { | |
1263 | restore_flags(flags); | |
1264 | return -ERESTARTSYS; | |
1265 | } | |
1266 | ||
1267 | /* | |
1268 | * Everything is ready now, so write the open message into shared | |
1269 | * memory. Once the message is in set the service bits to say that | |
1270 | * this port wants service. | |
1271 | */ | |
1272 | EBRDENABLE(brdp); | |
1273 | cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; | |
1274 | cp->openarg = arg; | |
1275 | cp->open = 1; | |
1276 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
1277 | bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset + | |
1278 | portp->portidx; | |
1279 | *bits |= portp->portbit; | |
1280 | EBRDDISABLE(brdp); | |
1281 | ||
1282 | if (wait == 0) { | |
1283 | restore_flags(flags); | |
1284 | return(0); | |
1285 | } | |
1286 | ||
1287 | /* | |
1288 | * Slave is in action, so now we must wait for the open acknowledgment | |
1289 | * to come back. | |
1290 | */ | |
1291 | rc = 0; | |
1292 | set_bit(ST_OPENING, &portp->state); | |
1293 | wait_event_interruptible(portp->raw_wait, | |
1294 | !test_bit(ST_OPENING, &portp->state)); | |
1295 | if (signal_pending(current)) | |
1296 | rc = -ERESTARTSYS; | |
1297 | restore_flags(flags); | |
1298 | ||
1299 | if ((rc == 0) && (portp->rc != 0)) | |
1300 | rc = -EIO; | |
1301 | return(rc); | |
1302 | } | |
1303 | ||
1304 | /*****************************************************************************/ | |
1305 | ||
1306 | /* | |
1307 | * Send a close message to the slave. Normally this will sleep waiting | |
1308 | * for the acknowledgement, but if wait parameter is 0 it will not. If | |
1309 | * wait is true then must have user context (to sleep). | |
1310 | */ | |
1311 | ||
1312 | static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait) | |
1313 | { | |
1314 | volatile cdkhdr_t *hdrp; | |
1315 | volatile cdkctrl_t *cp; | |
1316 | volatile unsigned char *bits; | |
1317 | unsigned long flags; | |
1318 | int rc; | |
1319 | ||
1320 | #ifdef DEBUG | |
1321 | printk("stli_rawclose(brdp=%x,portp=%x,arg=%x,wait=%d)\n", | |
1322 | (int) brdp, (int) portp, (int) arg, wait); | |
1323 | #endif | |
1324 | ||
1325 | save_flags(flags); | |
1326 | cli(); | |
1327 | ||
1328 | /* | |
1329 | * Slave is already closing this port. This can happen if a hangup | |
1330 | * occurs on this port. | |
1331 | */ | |
1332 | if (wait) { | |
1333 | wait_event_interruptible(portp->raw_wait, | |
1334 | !test_bit(ST_CLOSING, &portp->state)); | |
1335 | if (signal_pending(current)) { | |
1336 | restore_flags(flags); | |
1337 | return -ERESTARTSYS; | |
1338 | } | |
1339 | } | |
1340 | ||
1341 | /* | |
1342 | * Write the close command into shared memory. | |
1343 | */ | |
1344 | EBRDENABLE(brdp); | |
1345 | cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; | |
1346 | cp->closearg = arg; | |
1347 | cp->close = 1; | |
1348 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
1349 | bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset + | |
1350 | portp->portidx; | |
1351 | *bits |= portp->portbit; | |
1352 | EBRDDISABLE(brdp); | |
1353 | ||
1354 | set_bit(ST_CLOSING, &portp->state); | |
1355 | if (wait == 0) { | |
1356 | restore_flags(flags); | |
1357 | return(0); | |
1358 | } | |
1359 | ||
1360 | /* | |
1361 | * Slave is in action, so now we must wait for the open acknowledgment | |
1362 | * to come back. | |
1363 | */ | |
1364 | rc = 0; | |
1365 | wait_event_interruptible(portp->raw_wait, | |
1366 | !test_bit(ST_CLOSING, &portp->state)); | |
1367 | if (signal_pending(current)) | |
1368 | rc = -ERESTARTSYS; | |
1369 | restore_flags(flags); | |
1370 | ||
1371 | if ((rc == 0) && (portp->rc != 0)) | |
1372 | rc = -EIO; | |
1373 | return(rc); | |
1374 | } | |
1375 | ||
1376 | /*****************************************************************************/ | |
1377 | ||
1378 | /* | |
1379 | * Send a command to the slave and wait for the response. This must | |
1380 | * have user context (it sleeps). This routine is generic in that it | |
1381 | * can send any type of command. Its purpose is to wait for that command | |
1382 | * to complete (as opposed to initiating the command then returning). | |
1383 | */ | |
1384 | ||
1385 | static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback) | |
1386 | { | |
1387 | unsigned long flags; | |
1388 | ||
1389 | #ifdef DEBUG | |
1390 | printk("stli_cmdwait(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d," | |
1391 | "copyback=%d)\n", (int) brdp, (int) portp, (int) cmd, | |
1392 | (int) arg, size, copyback); | |
1393 | #endif | |
1394 | ||
1395 | save_flags(flags); | |
1396 | cli(); | |
1397 | wait_event_interruptible(portp->raw_wait, | |
1398 | !test_bit(ST_CMDING, &portp->state)); | |
1399 | if (signal_pending(current)) { | |
1400 | restore_flags(flags); | |
1401 | return -ERESTARTSYS; | |
1402 | } | |
1403 | ||
1404 | stli_sendcmd(brdp, portp, cmd, arg, size, copyback); | |
1405 | ||
1406 | wait_event_interruptible(portp->raw_wait, | |
1407 | !test_bit(ST_CMDING, &portp->state)); | |
1408 | if (signal_pending(current)) { | |
1409 | restore_flags(flags); | |
1410 | return -ERESTARTSYS; | |
1411 | } | |
1412 | restore_flags(flags); | |
1413 | ||
1414 | if (portp->rc != 0) | |
1415 | return(-EIO); | |
1416 | return(0); | |
1417 | } | |
1418 | ||
1419 | /*****************************************************************************/ | |
1420 | ||
1421 | /* | |
1422 | * Send the termios settings for this port to the slave. This sleeps | |
1423 | * waiting for the command to complete - so must have user context. | |
1424 | */ | |
1425 | ||
1426 | static int stli_setport(stliport_t *portp) | |
1427 | { | |
1428 | stlibrd_t *brdp; | |
1429 | asyport_t aport; | |
1430 | ||
1431 | #ifdef DEBUG | |
1432 | printk("stli_setport(portp=%x)\n", (int) portp); | |
1433 | #endif | |
1434 | ||
1435 | if (portp == (stliport_t *) NULL) | |
1436 | return(-ENODEV); | |
1437 | if (portp->tty == (struct tty_struct *) NULL) | |
1438 | return(-ENODEV); | |
1439 | if ((portp->brdnr < 0) && (portp->brdnr >= stli_nrbrds)) | |
1440 | return(-ENODEV); | |
1441 | brdp = stli_brds[portp->brdnr]; | |
1442 | if (brdp == (stlibrd_t *) NULL) | |
1443 | return(-ENODEV); | |
1444 | ||
1445 | stli_mkasyport(portp, &aport, portp->tty->termios); | |
1446 | return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0)); | |
1447 | } | |
1448 | ||
1449 | /*****************************************************************************/ | |
1450 | ||
1451 | /* | |
1452 | * Possibly need to wait for carrier (DCD signal) to come high. Say | |
1453 | * maybe because if we are clocal then we don't need to wait... | |
1454 | */ | |
1455 | ||
1456 | static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp) | |
1457 | { | |
1458 | unsigned long flags; | |
1459 | int rc, doclocal; | |
1460 | ||
1461 | #ifdef DEBUG | |
1462 | printk("stli_waitcarrier(brdp=%x,portp=%x,filp=%x)\n", | |
1463 | (int) brdp, (int) portp, (int) filp); | |
1464 | #endif | |
1465 | ||
1466 | rc = 0; | |
1467 | doclocal = 0; | |
1468 | ||
1469 | if (portp->tty->termios->c_cflag & CLOCAL) | |
1470 | doclocal++; | |
1471 | ||
1472 | save_flags(flags); | |
1473 | cli(); | |
1474 | portp->openwaitcnt++; | |
1475 | if (! tty_hung_up_p(filp)) | |
1476 | portp->refcount--; | |
1477 | ||
1478 | for (;;) { | |
1479 | stli_mkasysigs(&portp->asig, 1, 1); | |
1480 | if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, | |
1481 | &portp->asig, sizeof(asysigs_t), 0)) < 0) | |
1482 | break; | |
1483 | if (tty_hung_up_p(filp) || | |
1484 | ((portp->flags & ASYNC_INITIALIZED) == 0)) { | |
1485 | if (portp->flags & ASYNC_HUP_NOTIFY) | |
1486 | rc = -EBUSY; | |
1487 | else | |
1488 | rc = -ERESTARTSYS; | |
1489 | break; | |
1490 | } | |
1491 | if (((portp->flags & ASYNC_CLOSING) == 0) && | |
1492 | (doclocal || (portp->sigs & TIOCM_CD))) { | |
1493 | break; | |
1494 | } | |
1495 | if (signal_pending(current)) { | |
1496 | rc = -ERESTARTSYS; | |
1497 | break; | |
1498 | } | |
1499 | interruptible_sleep_on(&portp->open_wait); | |
1500 | } | |
1501 | ||
1502 | if (! tty_hung_up_p(filp)) | |
1503 | portp->refcount++; | |
1504 | portp->openwaitcnt--; | |
1505 | restore_flags(flags); | |
1506 | ||
1507 | return(rc); | |
1508 | } | |
1509 | ||
1510 | /*****************************************************************************/ | |
1511 | ||
1512 | /* | |
1513 | * Write routine. Take the data and put it in the shared memory ring | |
1514 | * queue. If port is not already sending chars then need to mark the | |
1515 | * service bits for this port. | |
1516 | */ | |
1517 | ||
1518 | static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count) | |
1519 | { | |
1520 | volatile cdkasy_t *ap; | |
1521 | volatile cdkhdr_t *hdrp; | |
1522 | volatile unsigned char *bits; | |
1523 | unsigned char *shbuf, *chbuf; | |
1524 | stliport_t *portp; | |
1525 | stlibrd_t *brdp; | |
1526 | unsigned int len, stlen, head, tail, size; | |
1527 | unsigned long flags; | |
1528 | ||
1529 | #ifdef DEBUG | |
1530 | printk("stli_write(tty=%x,buf=%x,count=%d)\n", | |
1531 | (int) tty, (int) buf, count); | |
1532 | #endif | |
1533 | ||
1534 | if ((tty == (struct tty_struct *) NULL) || | |
1535 | (stli_tmpwritebuf == (char *) NULL)) | |
1536 | return(0); | |
1537 | if (tty == stli_txcooktty) | |
1538 | stli_flushchars(tty); | |
1539 | portp = tty->driver_data; | |
1540 | if (portp == (stliport_t *) NULL) | |
1541 | return(0); | |
1542 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1543 | return(0); | |
1544 | brdp = stli_brds[portp->brdnr]; | |
1545 | if (brdp == (stlibrd_t *) NULL) | |
1546 | return(0); | |
1547 | chbuf = (unsigned char *) buf; | |
1548 | ||
1549 | /* | |
1550 | * All data is now local, shove as much as possible into shared memory. | |
1551 | */ | |
1552 | save_flags(flags); | |
1553 | cli(); | |
1554 | EBRDENABLE(brdp); | |
1555 | ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr); | |
1556 | head = (unsigned int) ap->txq.head; | |
1557 | tail = (unsigned int) ap->txq.tail; | |
1558 | if (tail != ((unsigned int) ap->txq.tail)) | |
1559 | tail = (unsigned int) ap->txq.tail; | |
1560 | size = portp->txsize; | |
1561 | if (head >= tail) { | |
1562 | len = size - (head - tail) - 1; | |
1563 | stlen = size - head; | |
1564 | } else { | |
1565 | len = tail - head - 1; | |
1566 | stlen = len; | |
1567 | } | |
1568 | ||
1569 | len = MIN(len, count); | |
1570 | count = 0; | |
1571 | shbuf = (char *) EBRDGETMEMPTR(brdp, portp->txoffset); | |
1572 | ||
1573 | while (len > 0) { | |
1574 | stlen = MIN(len, stlen); | |
1575 | memcpy((shbuf + head), chbuf, stlen); | |
1576 | chbuf += stlen; | |
1577 | len -= stlen; | |
1578 | count += stlen; | |
1579 | head += stlen; | |
1580 | if (head >= size) { | |
1581 | head = 0; | |
1582 | stlen = tail; | |
1583 | } | |
1584 | } | |
1585 | ||
1586 | ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr); | |
1587 | ap->txq.head = head; | |
1588 | if (test_bit(ST_TXBUSY, &portp->state)) { | |
1589 | if (ap->changed.data & DT_TXEMPTY) | |
1590 | ap->changed.data &= ~DT_TXEMPTY; | |
1591 | } | |
1592 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
1593 | bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset + | |
1594 | portp->portidx; | |
1595 | *bits |= portp->portbit; | |
1596 | set_bit(ST_TXBUSY, &portp->state); | |
1597 | EBRDDISABLE(brdp); | |
1598 | ||
1599 | restore_flags(flags); | |
1600 | ||
1601 | return(count); | |
1602 | } | |
1603 | ||
1604 | /*****************************************************************************/ | |
1605 | ||
1606 | /* | |
1607 | * Output a single character. We put it into a temporary local buffer | |
1608 | * (for speed) then write out that buffer when the flushchars routine | |
1609 | * is called. There is a safety catch here so that if some other port | |
1610 | * writes chars before the current buffer has been, then we write them | |
1611 | * first them do the new ports. | |
1612 | */ | |
1613 | ||
1614 | static void stli_putchar(struct tty_struct *tty, unsigned char ch) | |
1615 | { | |
1616 | #ifdef DEBUG | |
1617 | printk("stli_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch); | |
1618 | #endif | |
1619 | ||
1620 | if (tty == (struct tty_struct *) NULL) | |
1621 | return; | |
1622 | if (tty != stli_txcooktty) { | |
1623 | if (stli_txcooktty != (struct tty_struct *) NULL) | |
1624 | stli_flushchars(stli_txcooktty); | |
1625 | stli_txcooktty = tty; | |
1626 | } | |
1627 | ||
1628 | stli_txcookbuf[stli_txcooksize++] = ch; | |
1629 | } | |
1630 | ||
1631 | /*****************************************************************************/ | |
1632 | ||
1633 | /* | |
1634 | * Transfer characters from the local TX cooking buffer to the board. | |
1635 | * We sort of ignore the tty that gets passed in here. We rely on the | |
1636 | * info stored with the TX cook buffer to tell us which port to flush | |
1637 | * the data on. In any case we clean out the TX cook buffer, for re-use | |
1638 | * by someone else. | |
1639 | */ | |
1640 | ||
1641 | static void stli_flushchars(struct tty_struct *tty) | |
1642 | { | |
1643 | volatile cdkhdr_t *hdrp; | |
1644 | volatile unsigned char *bits; | |
1645 | volatile cdkasy_t *ap; | |
1646 | struct tty_struct *cooktty; | |
1647 | stliport_t *portp; | |
1648 | stlibrd_t *brdp; | |
1649 | unsigned int len, stlen, head, tail, size, count, cooksize; | |
1650 | unsigned char *buf, *shbuf; | |
1651 | unsigned long flags; | |
1652 | ||
1653 | #ifdef DEBUG | |
1654 | printk("stli_flushchars(tty=%x)\n", (int) tty); | |
1655 | #endif | |
1656 | ||
1657 | cooksize = stli_txcooksize; | |
1658 | cooktty = stli_txcooktty; | |
1659 | stli_txcooksize = 0; | |
1660 | stli_txcookrealsize = 0; | |
1661 | stli_txcooktty = (struct tty_struct *) NULL; | |
1662 | ||
1663 | if (tty == (struct tty_struct *) NULL) | |
1664 | return; | |
1665 | if (cooktty == (struct tty_struct *) NULL) | |
1666 | return; | |
1667 | if (tty != cooktty) | |
1668 | tty = cooktty; | |
1669 | if (cooksize == 0) | |
1670 | return; | |
1671 | ||
1672 | portp = tty->driver_data; | |
1673 | if (portp == (stliport_t *) NULL) | |
1674 | return; | |
1675 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1676 | return; | |
1677 | brdp = stli_brds[portp->brdnr]; | |
1678 | if (brdp == (stlibrd_t *) NULL) | |
1679 | return; | |
1680 | ||
1681 | save_flags(flags); | |
1682 | cli(); | |
1683 | EBRDENABLE(brdp); | |
1684 | ||
1685 | ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr); | |
1686 | head = (unsigned int) ap->txq.head; | |
1687 | tail = (unsigned int) ap->txq.tail; | |
1688 | if (tail != ((unsigned int) ap->txq.tail)) | |
1689 | tail = (unsigned int) ap->txq.tail; | |
1690 | size = portp->txsize; | |
1691 | if (head >= tail) { | |
1692 | len = size - (head - tail) - 1; | |
1693 | stlen = size - head; | |
1694 | } else { | |
1695 | len = tail - head - 1; | |
1696 | stlen = len; | |
1697 | } | |
1698 | ||
1699 | len = MIN(len, cooksize); | |
1700 | count = 0; | |
1701 | shbuf = (char *) EBRDGETMEMPTR(brdp, portp->txoffset); | |
1702 | buf = stli_txcookbuf; | |
1703 | ||
1704 | while (len > 0) { | |
1705 | stlen = MIN(len, stlen); | |
1706 | memcpy((shbuf + head), buf, stlen); | |
1707 | buf += stlen; | |
1708 | len -= stlen; | |
1709 | count += stlen; | |
1710 | head += stlen; | |
1711 | if (head >= size) { | |
1712 | head = 0; | |
1713 | stlen = tail; | |
1714 | } | |
1715 | } | |
1716 | ||
1717 | ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr); | |
1718 | ap->txq.head = head; | |
1719 | ||
1720 | if (test_bit(ST_TXBUSY, &portp->state)) { | |
1721 | if (ap->changed.data & DT_TXEMPTY) | |
1722 | ap->changed.data &= ~DT_TXEMPTY; | |
1723 | } | |
1724 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
1725 | bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset + | |
1726 | portp->portidx; | |
1727 | *bits |= portp->portbit; | |
1728 | set_bit(ST_TXBUSY, &portp->state); | |
1729 | ||
1730 | EBRDDISABLE(brdp); | |
1731 | restore_flags(flags); | |
1732 | } | |
1733 | ||
1734 | /*****************************************************************************/ | |
1735 | ||
1736 | static int stli_writeroom(struct tty_struct *tty) | |
1737 | { | |
1738 | volatile cdkasyrq_t *rp; | |
1739 | stliport_t *portp; | |
1740 | stlibrd_t *brdp; | |
1741 | unsigned int head, tail, len; | |
1742 | unsigned long flags; | |
1743 | ||
1744 | #ifdef DEBUG | |
1745 | printk("stli_writeroom(tty=%x)\n", (int) tty); | |
1746 | #endif | |
1747 | ||
1748 | if (tty == (struct tty_struct *) NULL) | |
1749 | return(0); | |
1750 | if (tty == stli_txcooktty) { | |
1751 | if (stli_txcookrealsize != 0) { | |
1752 | len = stli_txcookrealsize - stli_txcooksize; | |
1753 | return(len); | |
1754 | } | |
1755 | } | |
1756 | ||
1757 | portp = tty->driver_data; | |
1758 | if (portp == (stliport_t *) NULL) | |
1759 | return(0); | |
1760 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1761 | return(0); | |
1762 | brdp = stli_brds[portp->brdnr]; | |
1763 | if (brdp == (stlibrd_t *) NULL) | |
1764 | return(0); | |
1765 | ||
1766 | save_flags(flags); | |
1767 | cli(); | |
1768 | EBRDENABLE(brdp); | |
1769 | rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->txq; | |
1770 | head = (unsigned int) rp->head; | |
1771 | tail = (unsigned int) rp->tail; | |
1772 | if (tail != ((unsigned int) rp->tail)) | |
1773 | tail = (unsigned int) rp->tail; | |
1774 | len = (head >= tail) ? (portp->txsize - (head - tail)) : (tail - head); | |
1775 | len--; | |
1776 | EBRDDISABLE(brdp); | |
1777 | restore_flags(flags); | |
1778 | ||
1779 | if (tty == stli_txcooktty) { | |
1780 | stli_txcookrealsize = len; | |
1781 | len -= stli_txcooksize; | |
1782 | } | |
1783 | return(len); | |
1784 | } | |
1785 | ||
1786 | /*****************************************************************************/ | |
1787 | ||
1788 | /* | |
1789 | * Return the number of characters in the transmit buffer. Normally we | |
1790 | * will return the number of chars in the shared memory ring queue. | |
1791 | * We need to kludge around the case where the shared memory buffer is | |
1792 | * empty but not all characters have drained yet, for this case just | |
1793 | * return that there is 1 character in the buffer! | |
1794 | */ | |
1795 | ||
1796 | static int stli_charsinbuffer(struct tty_struct *tty) | |
1797 | { | |
1798 | volatile cdkasyrq_t *rp; | |
1799 | stliport_t *portp; | |
1800 | stlibrd_t *brdp; | |
1801 | unsigned int head, tail, len; | |
1802 | unsigned long flags; | |
1803 | ||
1804 | #ifdef DEBUG | |
1805 | printk("stli_charsinbuffer(tty=%x)\n", (int) tty); | |
1806 | #endif | |
1807 | ||
1808 | if (tty == (struct tty_struct *) NULL) | |
1809 | return(0); | |
1810 | if (tty == stli_txcooktty) | |
1811 | stli_flushchars(tty); | |
1812 | portp = tty->driver_data; | |
1813 | if (portp == (stliport_t *) NULL) | |
1814 | return(0); | |
1815 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1816 | return(0); | |
1817 | brdp = stli_brds[portp->brdnr]; | |
1818 | if (brdp == (stlibrd_t *) NULL) | |
1819 | return(0); | |
1820 | ||
1821 | save_flags(flags); | |
1822 | cli(); | |
1823 | EBRDENABLE(brdp); | |
1824 | rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->txq; | |
1825 | head = (unsigned int) rp->head; | |
1826 | tail = (unsigned int) rp->tail; | |
1827 | if (tail != ((unsigned int) rp->tail)) | |
1828 | tail = (unsigned int) rp->tail; | |
1829 | len = (head >= tail) ? (head - tail) : (portp->txsize - (tail - head)); | |
1830 | if ((len == 0) && test_bit(ST_TXBUSY, &portp->state)) | |
1831 | len = 1; | |
1832 | EBRDDISABLE(brdp); | |
1833 | restore_flags(flags); | |
1834 | ||
1835 | return(len); | |
1836 | } | |
1837 | ||
1838 | /*****************************************************************************/ | |
1839 | ||
1840 | /* | |
1841 | * Generate the serial struct info. | |
1842 | */ | |
1843 | ||
1844 | static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp) | |
1845 | { | |
1846 | struct serial_struct sio; | |
1847 | stlibrd_t *brdp; | |
1848 | ||
1849 | #ifdef DEBUG | |
1850 | printk("stli_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp); | |
1851 | #endif | |
1852 | ||
1853 | memset(&sio, 0, sizeof(struct serial_struct)); | |
1854 | sio.type = PORT_UNKNOWN; | |
1855 | sio.line = portp->portnr; | |
1856 | sio.irq = 0; | |
1857 | sio.flags = portp->flags; | |
1858 | sio.baud_base = portp->baud_base; | |
1859 | sio.close_delay = portp->close_delay; | |
1860 | sio.closing_wait = portp->closing_wait; | |
1861 | sio.custom_divisor = portp->custom_divisor; | |
1862 | sio.xmit_fifo_size = 0; | |
1863 | sio.hub6 = 0; | |
1864 | ||
1865 | brdp = stli_brds[portp->brdnr]; | |
1866 | if (brdp != (stlibrd_t *) NULL) | |
1867 | sio.port = brdp->iobase; | |
1868 | ||
1869 | return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? | |
1870 | -EFAULT : 0; | |
1871 | } | |
1872 | ||
1873 | /*****************************************************************************/ | |
1874 | ||
1875 | /* | |
1876 | * Set port according to the serial struct info. | |
1877 | * At this point we do not do any auto-configure stuff, so we will | |
1878 | * just quietly ignore any requests to change irq, etc. | |
1879 | */ | |
1880 | ||
1881 | static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp) | |
1882 | { | |
1883 | struct serial_struct sio; | |
1884 | int rc; | |
1885 | ||
1886 | #ifdef DEBUG | |
1887 | printk("stli_setserial(portp=%p,sp=%p)\n", portp, sp); | |
1888 | #endif | |
1889 | ||
1890 | if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) | |
1891 | return -EFAULT; | |
1892 | if (!capable(CAP_SYS_ADMIN)) { | |
1893 | if ((sio.baud_base != portp->baud_base) || | |
1894 | (sio.close_delay != portp->close_delay) || | |
1895 | ((sio.flags & ~ASYNC_USR_MASK) != | |
1896 | (portp->flags & ~ASYNC_USR_MASK))) | |
1897 | return(-EPERM); | |
1898 | } | |
1899 | ||
1900 | portp->flags = (portp->flags & ~ASYNC_USR_MASK) | | |
1901 | (sio.flags & ASYNC_USR_MASK); | |
1902 | portp->baud_base = sio.baud_base; | |
1903 | portp->close_delay = sio.close_delay; | |
1904 | portp->closing_wait = sio.closing_wait; | |
1905 | portp->custom_divisor = sio.custom_divisor; | |
1906 | ||
1907 | if ((rc = stli_setport(portp)) < 0) | |
1908 | return(rc); | |
1909 | return(0); | |
1910 | } | |
1911 | ||
1912 | /*****************************************************************************/ | |
1913 | ||
1914 | static int stli_tiocmget(struct tty_struct *tty, struct file *file) | |
1915 | { | |
1916 | stliport_t *portp = tty->driver_data; | |
1917 | stlibrd_t *brdp; | |
1918 | int rc; | |
1919 | ||
1920 | if (portp == (stliport_t *) NULL) | |
1921 | return(-ENODEV); | |
1922 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1923 | return(0); | |
1924 | brdp = stli_brds[portp->brdnr]; | |
1925 | if (brdp == (stlibrd_t *) NULL) | |
1926 | return(0); | |
1927 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1928 | return(-EIO); | |
1929 | ||
1930 | if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, | |
1931 | &portp->asig, sizeof(asysigs_t), 1)) < 0) | |
1932 | return(rc); | |
1933 | ||
1934 | return stli_mktiocm(portp->asig.sigvalue); | |
1935 | } | |
1936 | ||
1937 | static int stli_tiocmset(struct tty_struct *tty, struct file *file, | |
1938 | unsigned int set, unsigned int clear) | |
1939 | { | |
1940 | stliport_t *portp = tty->driver_data; | |
1941 | stlibrd_t *brdp; | |
1942 | int rts = -1, dtr = -1; | |
1943 | ||
1944 | if (portp == (stliport_t *) NULL) | |
1945 | return(-ENODEV); | |
1946 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1947 | return(0); | |
1948 | brdp = stli_brds[portp->brdnr]; | |
1949 | if (brdp == (stlibrd_t *) NULL) | |
1950 | return(0); | |
1951 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1952 | return(-EIO); | |
1953 | ||
1954 | if (set & TIOCM_RTS) | |
1955 | rts = 1; | |
1956 | if (set & TIOCM_DTR) | |
1957 | dtr = 1; | |
1958 | if (clear & TIOCM_RTS) | |
1959 | rts = 0; | |
1960 | if (clear & TIOCM_DTR) | |
1961 | dtr = 0; | |
1962 | ||
1963 | stli_mkasysigs(&portp->asig, dtr, rts); | |
1964 | ||
1965 | return stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, | |
1966 | sizeof(asysigs_t), 0); | |
1967 | } | |
1968 | ||
1969 | static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) | |
1970 | { | |
1971 | stliport_t *portp; | |
1972 | stlibrd_t *brdp; | |
1973 | unsigned int ival; | |
1974 | int rc; | |
1975 | void __user *argp = (void __user *)arg; | |
1976 | ||
1977 | #ifdef DEBUG | |
1978 | printk("stli_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n", | |
1979 | (int) tty, (int) file, cmd, (int) arg); | |
1980 | #endif | |
1981 | ||
1982 | if (tty == (struct tty_struct *) NULL) | |
1983 | return(-ENODEV); | |
1984 | portp = tty->driver_data; | |
1985 | if (portp == (stliport_t *) NULL) | |
1986 | return(-ENODEV); | |
1987 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
1988 | return(0); | |
1989 | brdp = stli_brds[portp->brdnr]; | |
1990 | if (brdp == (stlibrd_t *) NULL) | |
1991 | return(0); | |
1992 | ||
1993 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
1994 | (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) { | |
1995 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1996 | return(-EIO); | |
1997 | } | |
1998 | ||
1999 | rc = 0; | |
2000 | ||
2001 | switch (cmd) { | |
2002 | case TIOCGSOFTCAR: | |
2003 | rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0), | |
2004 | (unsigned __user *) arg); | |
2005 | break; | |
2006 | case TIOCSSOFTCAR: | |
2007 | if ((rc = get_user(ival, (unsigned __user *) arg)) == 0) | |
2008 | tty->termios->c_cflag = | |
2009 | (tty->termios->c_cflag & ~CLOCAL) | | |
2010 | (ival ? CLOCAL : 0); | |
2011 | break; | |
2012 | case TIOCGSERIAL: | |
2013 | rc = stli_getserial(portp, argp); | |
2014 | break; | |
2015 | case TIOCSSERIAL: | |
2016 | rc = stli_setserial(portp, argp); | |
2017 | break; | |
2018 | case STL_GETPFLAG: | |
2019 | rc = put_user(portp->pflag, (unsigned __user *)argp); | |
2020 | break; | |
2021 | case STL_SETPFLAG: | |
2022 | if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0) | |
2023 | stli_setport(portp); | |
2024 | break; | |
2025 | case COM_GETPORTSTATS: | |
2026 | rc = stli_getportstats(portp, argp); | |
2027 | break; | |
2028 | case COM_CLRPORTSTATS: | |
2029 | rc = stli_clrportstats(portp, argp); | |
2030 | break; | |
2031 | case TIOCSERCONFIG: | |
2032 | case TIOCSERGWILD: | |
2033 | case TIOCSERSWILD: | |
2034 | case TIOCSERGETLSR: | |
2035 | case TIOCSERGSTRUCT: | |
2036 | case TIOCSERGETMULTI: | |
2037 | case TIOCSERSETMULTI: | |
2038 | default: | |
2039 | rc = -ENOIOCTLCMD; | |
2040 | break; | |
2041 | } | |
2042 | ||
2043 | return(rc); | |
2044 | } | |
2045 | ||
2046 | /*****************************************************************************/ | |
2047 | ||
2048 | /* | |
2049 | * This routine assumes that we have user context and can sleep. | |
2050 | * Looks like it is true for the current ttys implementation..!! | |
2051 | */ | |
2052 | ||
2053 | static void stli_settermios(struct tty_struct *tty, struct termios *old) | |
2054 | { | |
2055 | stliport_t *portp; | |
2056 | stlibrd_t *brdp; | |
2057 | struct termios *tiosp; | |
2058 | asyport_t aport; | |
2059 | ||
2060 | #ifdef DEBUG | |
2061 | printk("stli_settermios(tty=%x,old=%x)\n", (int) tty, (int) old); | |
2062 | #endif | |
2063 | ||
2064 | if (tty == (struct tty_struct *) NULL) | |
2065 | return; | |
2066 | portp = tty->driver_data; | |
2067 | if (portp == (stliport_t *) NULL) | |
2068 | return; | |
2069 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2070 | return; | |
2071 | brdp = stli_brds[portp->brdnr]; | |
2072 | if (brdp == (stlibrd_t *) NULL) | |
2073 | return; | |
2074 | ||
2075 | tiosp = tty->termios; | |
2076 | if ((tiosp->c_cflag == old->c_cflag) && | |
2077 | (tiosp->c_iflag == old->c_iflag)) | |
2078 | return; | |
2079 | ||
2080 | stli_mkasyport(portp, &aport, tiosp); | |
2081 | stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0); | |
2082 | stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1); | |
2083 | stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, | |
2084 | sizeof(asysigs_t), 0); | |
2085 | if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) | |
2086 | tty->hw_stopped = 0; | |
2087 | if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) | |
2088 | wake_up_interruptible(&portp->open_wait); | |
2089 | } | |
2090 | ||
2091 | /*****************************************************************************/ | |
2092 | ||
2093 | /* | |
2094 | * Attempt to flow control who ever is sending us data. We won't really | |
2095 | * do any flow control action here. We can't directly, and even if we | |
2096 | * wanted to we would have to send a command to the slave. The slave | |
2097 | * knows how to flow control, and will do so when its buffers reach its | |
2098 | * internal high water marks. So what we will do is set a local state | |
2099 | * bit that will stop us sending any RX data up from the poll routine | |
2100 | * (which is the place where RX data from the slave is handled). | |
2101 | */ | |
2102 | ||
2103 | static void stli_throttle(struct tty_struct *tty) | |
2104 | { | |
2105 | stliport_t *portp; | |
2106 | ||
2107 | #ifdef DEBUG | |
2108 | printk("stli_throttle(tty=%x)\n", (int) tty); | |
2109 | #endif | |
2110 | ||
2111 | if (tty == (struct tty_struct *) NULL) | |
2112 | return; | |
2113 | portp = tty->driver_data; | |
2114 | if (portp == (stliport_t *) NULL) | |
2115 | return; | |
2116 | ||
2117 | set_bit(ST_RXSTOP, &portp->state); | |
2118 | } | |
2119 | ||
2120 | /*****************************************************************************/ | |
2121 | ||
2122 | /* | |
2123 | * Unflow control the device sending us data... That means that all | |
2124 | * we have to do is clear the RXSTOP state bit. The next poll call | |
2125 | * will then be able to pass the RX data back up. | |
2126 | */ | |
2127 | ||
2128 | static void stli_unthrottle(struct tty_struct *tty) | |
2129 | { | |
2130 | stliport_t *portp; | |
2131 | ||
2132 | #ifdef DEBUG | |
2133 | printk("stli_unthrottle(tty=%x)\n", (int) tty); | |
2134 | #endif | |
2135 | ||
2136 | if (tty == (struct tty_struct *) NULL) | |
2137 | return; | |
2138 | portp = tty->driver_data; | |
2139 | if (portp == (stliport_t *) NULL) | |
2140 | return; | |
2141 | ||
2142 | clear_bit(ST_RXSTOP, &portp->state); | |
2143 | } | |
2144 | ||
2145 | /*****************************************************************************/ | |
2146 | ||
2147 | /* | |
2148 | * Stop the transmitter. Basically to do this we will just turn TX | |
2149 | * interrupts off. | |
2150 | */ | |
2151 | ||
2152 | static void stli_stop(struct tty_struct *tty) | |
2153 | { | |
2154 | stlibrd_t *brdp; | |
2155 | stliport_t *portp; | |
2156 | asyctrl_t actrl; | |
2157 | ||
2158 | #ifdef DEBUG | |
2159 | printk("stli_stop(tty=%x)\n", (int) tty); | |
2160 | #endif | |
2161 | ||
2162 | if (tty == (struct tty_struct *) NULL) | |
2163 | return; | |
2164 | portp = tty->driver_data; | |
2165 | if (portp == (stliport_t *) NULL) | |
2166 | return; | |
2167 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2168 | return; | |
2169 | brdp = stli_brds[portp->brdnr]; | |
2170 | if (brdp == (stlibrd_t *) NULL) | |
2171 | return; | |
2172 | ||
2173 | memset(&actrl, 0, sizeof(asyctrl_t)); | |
2174 | actrl.txctrl = CT_STOPFLOW; | |
2175 | #if 0 | |
2176 | stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0); | |
2177 | #endif | |
2178 | } | |
2179 | ||
2180 | /*****************************************************************************/ | |
2181 | ||
2182 | /* | |
2183 | * Start the transmitter again. Just turn TX interrupts back on. | |
2184 | */ | |
2185 | ||
2186 | static void stli_start(struct tty_struct *tty) | |
2187 | { | |
2188 | stliport_t *portp; | |
2189 | stlibrd_t *brdp; | |
2190 | asyctrl_t actrl; | |
2191 | ||
2192 | #ifdef DEBUG | |
2193 | printk("stli_start(tty=%x)\n", (int) tty); | |
2194 | #endif | |
2195 | ||
2196 | if (tty == (struct tty_struct *) NULL) | |
2197 | return; | |
2198 | portp = tty->driver_data; | |
2199 | if (portp == (stliport_t *) NULL) | |
2200 | return; | |
2201 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2202 | return; | |
2203 | brdp = stli_brds[portp->brdnr]; | |
2204 | if (brdp == (stlibrd_t *) NULL) | |
2205 | return; | |
2206 | ||
2207 | memset(&actrl, 0, sizeof(asyctrl_t)); | |
2208 | actrl.txctrl = CT_STARTFLOW; | |
2209 | #if 0 | |
2210 | stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0); | |
2211 | #endif | |
2212 | } | |
2213 | ||
2214 | /*****************************************************************************/ | |
2215 | ||
2216 | /* | |
2217 | * Scheduler called hang up routine. This is called from the scheduler, | |
2218 | * not direct from the driver "poll" routine. We can't call it there | |
2219 | * since the real local hangup code will enable/disable the board and | |
2220 | * other things that we can't do while handling the poll. Much easier | |
2221 | * to deal with it some time later (don't really care when, hangups | |
2222 | * aren't that time critical). | |
2223 | */ | |
2224 | ||
2225 | static void stli_dohangup(void *arg) | |
2226 | { | |
2227 | stliport_t *portp; | |
2228 | ||
2229 | #ifdef DEBUG | |
2230 | printk(KERN_DEBUG "stli_dohangup(portp=%x)\n", (int) arg); | |
2231 | #endif | |
2232 | ||
2233 | /* | |
2234 | * FIXME: There's a module removal race here: tty_hangup | |
2235 | * calls schedule_work which will call into this | |
2236 | * driver later. | |
2237 | */ | |
2238 | portp = (stliport_t *) arg; | |
2239 | if (portp != (stliport_t *) NULL) { | |
2240 | if (portp->tty != (struct tty_struct *) NULL) { | |
2241 | tty_hangup(portp->tty); | |
2242 | } | |
2243 | } | |
2244 | } | |
2245 | ||
2246 | /*****************************************************************************/ | |
2247 | ||
2248 | /* | |
2249 | * Hangup this port. This is pretty much like closing the port, only | |
2250 | * a little more brutal. No waiting for data to drain. Shutdown the | |
2251 | * port and maybe drop signals. This is rather tricky really. We want | |
2252 | * to close the port as well. | |
2253 | */ | |
2254 | ||
2255 | static void stli_hangup(struct tty_struct *tty) | |
2256 | { | |
2257 | stliport_t *portp; | |
2258 | stlibrd_t *brdp; | |
2259 | unsigned long flags; | |
2260 | ||
2261 | #ifdef DEBUG | |
2262 | printk(KERN_DEBUG "stli_hangup(tty=%x)\n", (int) tty); | |
2263 | #endif | |
2264 | ||
2265 | if (tty == (struct tty_struct *) NULL) | |
2266 | return; | |
2267 | portp = tty->driver_data; | |
2268 | if (portp == (stliport_t *) NULL) | |
2269 | return; | |
2270 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2271 | return; | |
2272 | brdp = stli_brds[portp->brdnr]; | |
2273 | if (brdp == (stlibrd_t *) NULL) | |
2274 | return; | |
2275 | ||
2276 | portp->flags &= ~ASYNC_INITIALIZED; | |
2277 | ||
2278 | save_flags(flags); | |
2279 | cli(); | |
2280 | if (! test_bit(ST_CLOSING, &portp->state)) | |
2281 | stli_rawclose(brdp, portp, 0, 0); | |
2282 | if (tty->termios->c_cflag & HUPCL) { | |
2283 | stli_mkasysigs(&portp->asig, 0, 0); | |
2284 | if (test_bit(ST_CMDING, &portp->state)) { | |
2285 | set_bit(ST_DOSIGS, &portp->state); | |
2286 | set_bit(ST_DOFLUSHTX, &portp->state); | |
2287 | set_bit(ST_DOFLUSHRX, &portp->state); | |
2288 | } else { | |
2289 | stli_sendcmd(brdp, portp, A_SETSIGNALSF, | |
2290 | &portp->asig, sizeof(asysigs_t), 0); | |
2291 | } | |
2292 | } | |
2293 | restore_flags(flags); | |
2294 | ||
2295 | clear_bit(ST_TXBUSY, &portp->state); | |
2296 | clear_bit(ST_RXSTOP, &portp->state); | |
2297 | set_bit(TTY_IO_ERROR, &tty->flags); | |
2298 | portp->tty = (struct tty_struct *) NULL; | |
2299 | portp->flags &= ~ASYNC_NORMAL_ACTIVE; | |
2300 | portp->refcount = 0; | |
2301 | wake_up_interruptible(&portp->open_wait); | |
2302 | } | |
2303 | ||
2304 | /*****************************************************************************/ | |
2305 | ||
2306 | /* | |
2307 | * Flush characters from the lower buffer. We may not have user context | |
2308 | * so we cannot sleep waiting for it to complete. Also we need to check | |
2309 | * if there is chars for this port in the TX cook buffer, and flush them | |
2310 | * as well. | |
2311 | */ | |
2312 | ||
2313 | static void stli_flushbuffer(struct tty_struct *tty) | |
2314 | { | |
2315 | stliport_t *portp; | |
2316 | stlibrd_t *brdp; | |
2317 | unsigned long ftype, flags; | |
2318 | ||
2319 | #ifdef DEBUG | |
2320 | printk(KERN_DEBUG "stli_flushbuffer(tty=%x)\n", (int) tty); | |
2321 | #endif | |
2322 | ||
2323 | if (tty == (struct tty_struct *) NULL) | |
2324 | return; | |
2325 | portp = tty->driver_data; | |
2326 | if (portp == (stliport_t *) NULL) | |
2327 | return; | |
2328 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2329 | return; | |
2330 | brdp = stli_brds[portp->brdnr]; | |
2331 | if (brdp == (stlibrd_t *) NULL) | |
2332 | return; | |
2333 | ||
2334 | save_flags(flags); | |
2335 | cli(); | |
2336 | if (tty == stli_txcooktty) { | |
2337 | stli_txcooktty = (struct tty_struct *) NULL; | |
2338 | stli_txcooksize = 0; | |
2339 | stli_txcookrealsize = 0; | |
2340 | } | |
2341 | if (test_bit(ST_CMDING, &portp->state)) { | |
2342 | set_bit(ST_DOFLUSHTX, &portp->state); | |
2343 | } else { | |
2344 | ftype = FLUSHTX; | |
2345 | if (test_bit(ST_DOFLUSHRX, &portp->state)) { | |
2346 | ftype |= FLUSHRX; | |
2347 | clear_bit(ST_DOFLUSHRX, &portp->state); | |
2348 | } | |
2349 | stli_sendcmd(brdp, portp, A_FLUSH, &ftype, | |
2350 | sizeof(unsigned long), 0); | |
2351 | } | |
2352 | restore_flags(flags); | |
2353 | ||
2354 | wake_up_interruptible(&tty->write_wait); | |
2355 | if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && | |
2356 | tty->ldisc.write_wakeup) | |
2357 | (tty->ldisc.write_wakeup)(tty); | |
2358 | } | |
2359 | ||
2360 | /*****************************************************************************/ | |
2361 | ||
2362 | static void stli_breakctl(struct tty_struct *tty, int state) | |
2363 | { | |
2364 | stlibrd_t *brdp; | |
2365 | stliport_t *portp; | |
2366 | long arg; | |
2367 | /* long savestate, savetime; */ | |
2368 | ||
2369 | #ifdef DEBUG | |
2370 | printk(KERN_DEBUG "stli_breakctl(tty=%x,state=%d)\n", (int) tty, state); | |
2371 | #endif | |
2372 | ||
2373 | if (tty == (struct tty_struct *) NULL) | |
2374 | return; | |
2375 | portp = tty->driver_data; | |
2376 | if (portp == (stliport_t *) NULL) | |
2377 | return; | |
2378 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2379 | return; | |
2380 | brdp = stli_brds[portp->brdnr]; | |
2381 | if (brdp == (stlibrd_t *) NULL) | |
2382 | return; | |
2383 | ||
2384 | /* | |
2385 | * Due to a bug in the tty send_break() code we need to preserve | |
2386 | * the current process state and timeout... | |
2387 | savetime = current->timeout; | |
2388 | savestate = current->state; | |
2389 | */ | |
2390 | ||
2391 | arg = (state == -1) ? BREAKON : BREAKOFF; | |
2392 | stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0); | |
2393 | ||
2394 | /* | |
2395 | * | |
2396 | current->timeout = savetime; | |
2397 | current->state = savestate; | |
2398 | */ | |
2399 | } | |
2400 | ||
2401 | /*****************************************************************************/ | |
2402 | ||
2403 | static void stli_waituntilsent(struct tty_struct *tty, int timeout) | |
2404 | { | |
2405 | stliport_t *portp; | |
2406 | unsigned long tend; | |
2407 | ||
2408 | #ifdef DEBUG | |
2409 | printk(KERN_DEBUG "stli_waituntilsent(tty=%x,timeout=%x)\n", (int) tty, timeout); | |
2410 | #endif | |
2411 | ||
2412 | if (tty == (struct tty_struct *) NULL) | |
2413 | return; | |
2414 | portp = tty->driver_data; | |
2415 | if (portp == (stliport_t *) NULL) | |
2416 | return; | |
2417 | ||
2418 | if (timeout == 0) | |
2419 | timeout = HZ; | |
2420 | tend = jiffies + timeout; | |
2421 | ||
2422 | while (test_bit(ST_TXBUSY, &portp->state)) { | |
2423 | if (signal_pending(current)) | |
2424 | break; | |
2425 | msleep_interruptible(20); | |
2426 | if (time_after_eq(jiffies, tend)) | |
2427 | break; | |
2428 | } | |
2429 | } | |
2430 | ||
2431 | /*****************************************************************************/ | |
2432 | ||
2433 | static void stli_sendxchar(struct tty_struct *tty, char ch) | |
2434 | { | |
2435 | stlibrd_t *brdp; | |
2436 | stliport_t *portp; | |
2437 | asyctrl_t actrl; | |
2438 | ||
2439 | #ifdef DEBUG | |
2440 | printk(KERN_DEBUG "stli_sendxchar(tty=%x,ch=%x)\n", (int) tty, ch); | |
2441 | #endif | |
2442 | ||
2443 | if (tty == (struct tty_struct *) NULL) | |
2444 | return; | |
2445 | portp = tty->driver_data; | |
2446 | if (portp == (stliport_t *) NULL) | |
2447 | return; | |
2448 | if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) | |
2449 | return; | |
2450 | brdp = stli_brds[portp->brdnr]; | |
2451 | if (brdp == (stlibrd_t *) NULL) | |
2452 | return; | |
2453 | ||
2454 | memset(&actrl, 0, sizeof(asyctrl_t)); | |
2455 | if (ch == STOP_CHAR(tty)) { | |
2456 | actrl.rxctrl = CT_STOPFLOW; | |
2457 | } else if (ch == START_CHAR(tty)) { | |
2458 | actrl.rxctrl = CT_STARTFLOW; | |
2459 | } else { | |
2460 | actrl.txctrl = CT_SENDCHR; | |
2461 | actrl.tximdch = ch; | |
2462 | } | |
2463 | ||
2464 | stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0); | |
2465 | } | |
2466 | ||
2467 | /*****************************************************************************/ | |
2468 | ||
2469 | #define MAXLINE 80 | |
2470 | ||
2471 | /* | |
2472 | * Format info for a specified port. The line is deliberately limited | |
2473 | * to 80 characters. (If it is too long it will be truncated, if too | |
2474 | * short then padded with spaces). | |
2475 | */ | |
2476 | ||
2477 | static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos) | |
2478 | { | |
2479 | char *sp, *uart; | |
2480 | int rc, cnt; | |
2481 | ||
2482 | rc = stli_portcmdstats(portp); | |
2483 | ||
2484 | uart = "UNKNOWN"; | |
2485 | if (brdp->state & BST_STARTED) { | |
2486 | switch (stli_comstats.hwid) { | |
2487 | case 0: uart = "2681"; break; | |
2488 | case 1: uart = "SC26198"; break; | |
2489 | default: uart = "CD1400"; break; | |
2490 | } | |
2491 | } | |
2492 | ||
2493 | sp = pos; | |
2494 | sp += sprintf(sp, "%d: uart:%s ", portnr, uart); | |
2495 | ||
2496 | if ((brdp->state & BST_STARTED) && (rc >= 0)) { | |
2497 | sp += sprintf(sp, "tx:%d rx:%d", (int) stli_comstats.txtotal, | |
2498 | (int) stli_comstats.rxtotal); | |
2499 | ||
2500 | if (stli_comstats.rxframing) | |
2501 | sp += sprintf(sp, " fe:%d", | |
2502 | (int) stli_comstats.rxframing); | |
2503 | if (stli_comstats.rxparity) | |
2504 | sp += sprintf(sp, " pe:%d", | |
2505 | (int) stli_comstats.rxparity); | |
2506 | if (stli_comstats.rxbreaks) | |
2507 | sp += sprintf(sp, " brk:%d", | |
2508 | (int) stli_comstats.rxbreaks); | |
2509 | if (stli_comstats.rxoverrun) | |
2510 | sp += sprintf(sp, " oe:%d", | |
2511 | (int) stli_comstats.rxoverrun); | |
2512 | ||
2513 | cnt = sprintf(sp, "%s%s%s%s%s ", | |
2514 | (stli_comstats.signals & TIOCM_RTS) ? "|RTS" : "", | |
2515 | (stli_comstats.signals & TIOCM_CTS) ? "|CTS" : "", | |
2516 | (stli_comstats.signals & TIOCM_DTR) ? "|DTR" : "", | |
2517 | (stli_comstats.signals & TIOCM_CD) ? "|DCD" : "", | |
2518 | (stli_comstats.signals & TIOCM_DSR) ? "|DSR" : ""); | |
2519 | *sp = ' '; | |
2520 | sp += cnt; | |
2521 | } | |
2522 | ||
2523 | for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++) | |
2524 | *sp++ = ' '; | |
2525 | if (cnt >= MAXLINE) | |
2526 | pos[(MAXLINE - 2)] = '+'; | |
2527 | pos[(MAXLINE - 1)] = '\n'; | |
2528 | ||
2529 | return(MAXLINE); | |
2530 | } | |
2531 | ||
2532 | /*****************************************************************************/ | |
2533 | ||
2534 | /* | |
2535 | * Port info, read from the /proc file system. | |
2536 | */ | |
2537 | ||
2538 | static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) | |
2539 | { | |
2540 | stlibrd_t *brdp; | |
2541 | stliport_t *portp; | |
2542 | int brdnr, portnr, totalport; | |
2543 | int curoff, maxoff; | |
2544 | char *pos; | |
2545 | ||
2546 | #ifdef DEBUG | |
2547 | printk(KERN_DEBUG "stli_readproc(page=%x,start=%x,off=%x,count=%d,eof=%x," | |
2548 | "data=%x\n", (int) page, (int) start, (int) off, count, | |
2549 | (int) eof, (int) data); | |
2550 | #endif | |
2551 | ||
2552 | pos = page; | |
2553 | totalport = 0; | |
2554 | curoff = 0; | |
2555 | ||
2556 | if (off == 0) { | |
2557 | pos += sprintf(pos, "%s: version %s", stli_drvtitle, | |
2558 | stli_drvversion); | |
2559 | while (pos < (page + MAXLINE - 1)) | |
2560 | *pos++ = ' '; | |
2561 | *pos++ = '\n'; | |
2562 | } | |
2563 | curoff = MAXLINE; | |
2564 | ||
2565 | /* | |
2566 | * We scan through for each board, panel and port. The offset is | |
2567 | * calculated on the fly, and irrelevant ports are skipped. | |
2568 | */ | |
2569 | for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) { | |
2570 | brdp = stli_brds[brdnr]; | |
2571 | if (brdp == (stlibrd_t *) NULL) | |
2572 | continue; | |
2573 | if (brdp->state == 0) | |
2574 | continue; | |
2575 | ||
2576 | maxoff = curoff + (brdp->nrports * MAXLINE); | |
2577 | if (off >= maxoff) { | |
2578 | curoff = maxoff; | |
2579 | continue; | |
2580 | } | |
2581 | ||
2582 | totalport = brdnr * STL_MAXPORTS; | |
2583 | for (portnr = 0; (portnr < brdp->nrports); portnr++, | |
2584 | totalport++) { | |
2585 | portp = brdp->ports[portnr]; | |
2586 | if (portp == (stliport_t *) NULL) | |
2587 | continue; | |
2588 | if (off >= (curoff += MAXLINE)) | |
2589 | continue; | |
2590 | if ((pos - page + MAXLINE) > count) | |
2591 | goto stli_readdone; | |
2592 | pos += stli_portinfo(brdp, portp, totalport, pos); | |
2593 | } | |
2594 | } | |
2595 | ||
2596 | *eof = 1; | |
2597 | ||
2598 | stli_readdone: | |
2599 | *start = page; | |
2600 | return(pos - page); | |
2601 | } | |
2602 | ||
2603 | /*****************************************************************************/ | |
2604 | ||
2605 | /* | |
2606 | * Generic send command routine. This will send a message to the slave, | |
2607 | * of the specified type with the specified argument. Must be very | |
2608 | * careful of data that will be copied out from shared memory - | |
2609 | * containing command results. The command completion is all done from | |
2610 | * a poll routine that does not have user context. Therefore you cannot | |
2611 | * copy back directly into user space, or to the kernel stack of a | |
2612 | * process. This routine does not sleep, so can be called from anywhere. | |
2613 | */ | |
2614 | ||
2615 | static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback) | |
2616 | { | |
2617 | volatile cdkhdr_t *hdrp; | |
2618 | volatile cdkctrl_t *cp; | |
2619 | volatile unsigned char *bits; | |
2620 | unsigned long flags; | |
2621 | ||
2622 | #ifdef DEBUG | |
2623 | printk(KERN_DEBUG "stli_sendcmd(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d," | |
2624 | "copyback=%d)\n", (int) brdp, (int) portp, (int) cmd, | |
2625 | (int) arg, size, copyback); | |
2626 | #endif | |
2627 | ||
2628 | save_flags(flags); | |
2629 | cli(); | |
2630 | ||
2631 | if (test_bit(ST_CMDING, &portp->state)) { | |
2632 | printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n", | |
2633 | (int) cmd); | |
2634 | restore_flags(flags); | |
2635 | return; | |
2636 | } | |
2637 | ||
2638 | EBRDENABLE(brdp); | |
2639 | cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; | |
2640 | if (size > 0) { | |
2641 | memcpy((void *) &(cp->args[0]), arg, size); | |
2642 | if (copyback) { | |
2643 | portp->argp = arg; | |
2644 | portp->argsize = size; | |
2645 | } | |
2646 | } | |
2647 | cp->status = 0; | |
2648 | cp->cmd = cmd; | |
2649 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
2650 | bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset + | |
2651 | portp->portidx; | |
2652 | *bits |= portp->portbit; | |
2653 | set_bit(ST_CMDING, &portp->state); | |
2654 | EBRDDISABLE(brdp); | |
2655 | restore_flags(flags); | |
2656 | } | |
2657 | ||
2658 | /*****************************************************************************/ | |
2659 | ||
2660 | /* | |
2661 | * Read data from shared memory. This assumes that the shared memory | |
2662 | * is enabled and that interrupts are off. Basically we just empty out | |
2663 | * the shared memory buffer into the tty buffer. Must be careful to | |
2664 | * handle the case where we fill up the tty buffer, but still have | |
2665 | * more chars to unload. | |
2666 | */ | |
2667 | ||
2668 | static void stli_read(stlibrd_t *brdp, stliport_t *portp) | |
2669 | { | |
2670 | volatile cdkasyrq_t *rp; | |
2671 | volatile char *shbuf; | |
2672 | struct tty_struct *tty; | |
2673 | unsigned int head, tail, size; | |
2674 | unsigned int len, stlen; | |
2675 | ||
2676 | #ifdef DEBUG | |
2677 | printk(KERN_DEBUG "stli_read(brdp=%x,portp=%d)\n", | |
2678 | (int) brdp, (int) portp); | |
2679 | #endif | |
2680 | ||
2681 | if (test_bit(ST_RXSTOP, &portp->state)) | |
2682 | return; | |
2683 | tty = portp->tty; | |
2684 | if (tty == (struct tty_struct *) NULL) | |
2685 | return; | |
2686 | ||
2687 | rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->rxq; | |
2688 | head = (unsigned int) rp->head; | |
2689 | if (head != ((unsigned int) rp->head)) | |
2690 | head = (unsigned int) rp->head; | |
2691 | tail = (unsigned int) rp->tail; | |
2692 | size = portp->rxsize; | |
2693 | if (head >= tail) { | |
2694 | len = head - tail; | |
2695 | stlen = len; | |
2696 | } else { | |
2697 | len = size - (tail - head); | |
2698 | stlen = size - tail; | |
2699 | } | |
2700 | ||
33f0f88f AC |
2701 | len = tty_buffer_request_room(tty, len); |
2702 | /* FIXME : iomap ? */ | |
1da177e4 LT |
2703 | shbuf = (volatile char *) EBRDGETMEMPTR(brdp, portp->rxoffset); |
2704 | ||
2705 | while (len > 0) { | |
2706 | stlen = MIN(len, stlen); | |
33f0f88f | 2707 | tty_insert_flip_string(tty, (char *)(shbuf + tail), stlen); |
1da177e4 LT |
2708 | len -= stlen; |
2709 | tail += stlen; | |
2710 | if (tail >= size) { | |
2711 | tail = 0; | |
2712 | stlen = head; | |
2713 | } | |
2714 | } | |
2715 | rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->rxq; | |
2716 | rp->tail = tail; | |
2717 | ||
2718 | if (head != tail) | |
2719 | set_bit(ST_RXING, &portp->state); | |
2720 | ||
2721 | tty_schedule_flip(tty); | |
2722 | } | |
2723 | ||
2724 | /*****************************************************************************/ | |
2725 | ||
2726 | /* | |
2727 | * Set up and carry out any delayed commands. There is only a small set | |
2728 | * of slave commands that can be done "off-level". So it is not too | |
2729 | * difficult to deal with them here. | |
2730 | */ | |
2731 | ||
2732 | static void stli_dodelaycmd(stliport_t *portp, volatile cdkctrl_t *cp) | |
2733 | { | |
2734 | int cmd; | |
2735 | ||
2736 | if (test_bit(ST_DOSIGS, &portp->state)) { | |
2737 | if (test_bit(ST_DOFLUSHTX, &portp->state) && | |
2738 | test_bit(ST_DOFLUSHRX, &portp->state)) | |
2739 | cmd = A_SETSIGNALSF; | |
2740 | else if (test_bit(ST_DOFLUSHTX, &portp->state)) | |
2741 | cmd = A_SETSIGNALSFTX; | |
2742 | else if (test_bit(ST_DOFLUSHRX, &portp->state)) | |
2743 | cmd = A_SETSIGNALSFRX; | |
2744 | else | |
2745 | cmd = A_SETSIGNALS; | |
2746 | clear_bit(ST_DOFLUSHTX, &portp->state); | |
2747 | clear_bit(ST_DOFLUSHRX, &portp->state); | |
2748 | clear_bit(ST_DOSIGS, &portp->state); | |
2749 | memcpy((void *) &(cp->args[0]), (void *) &portp->asig, | |
2750 | sizeof(asysigs_t)); | |
2751 | cp->status = 0; | |
2752 | cp->cmd = cmd; | |
2753 | set_bit(ST_CMDING, &portp->state); | |
2754 | } else if (test_bit(ST_DOFLUSHTX, &portp->state) || | |
2755 | test_bit(ST_DOFLUSHRX, &portp->state)) { | |
2756 | cmd = ((test_bit(ST_DOFLUSHTX, &portp->state)) ? FLUSHTX : 0); | |
2757 | cmd |= ((test_bit(ST_DOFLUSHRX, &portp->state)) ? FLUSHRX : 0); | |
2758 | clear_bit(ST_DOFLUSHTX, &portp->state); | |
2759 | clear_bit(ST_DOFLUSHRX, &portp->state); | |
2760 | memcpy((void *) &(cp->args[0]), (void *) &cmd, sizeof(int)); | |
2761 | cp->status = 0; | |
2762 | cp->cmd = A_FLUSH; | |
2763 | set_bit(ST_CMDING, &portp->state); | |
2764 | } | |
2765 | } | |
2766 | ||
2767 | /*****************************************************************************/ | |
2768 | ||
2769 | /* | |
2770 | * Host command service checking. This handles commands or messages | |
2771 | * coming from the slave to the host. Must have board shared memory | |
2772 | * enabled and interrupts off when called. Notice that by servicing the | |
2773 | * read data last we don't need to change the shared memory pointer | |
2774 | * during processing (which is a slow IO operation). | |
2775 | * Return value indicates if this port is still awaiting actions from | |
2776 | * the slave (like open, command, or even TX data being sent). If 0 | |
2777 | * then port is still busy, otherwise no longer busy. | |
2778 | */ | |
2779 | ||
2780 | static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp) | |
2781 | { | |
2782 | volatile cdkasy_t *ap; | |
2783 | volatile cdkctrl_t *cp; | |
2784 | struct tty_struct *tty; | |
2785 | asynotify_t nt; | |
2786 | unsigned long oldsigs; | |
2787 | int rc, donerx; | |
2788 | ||
2789 | #ifdef DEBUG | |
2790 | printk(KERN_DEBUG "stli_hostcmd(brdp=%x,channr=%d)\n", | |
2791 | (int) brdp, channr); | |
2792 | #endif | |
2793 | ||
2794 | ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr); | |
2795 | cp = &ap->ctrl; | |
2796 | ||
2797 | /* | |
2798 | * Check if we are waiting for an open completion message. | |
2799 | */ | |
2800 | if (test_bit(ST_OPENING, &portp->state)) { | |
2801 | rc = (int) cp->openarg; | |
2802 | if ((cp->open == 0) && (rc != 0)) { | |
2803 | if (rc > 0) | |
2804 | rc--; | |
2805 | cp->openarg = 0; | |
2806 | portp->rc = rc; | |
2807 | clear_bit(ST_OPENING, &portp->state); | |
2808 | wake_up_interruptible(&portp->raw_wait); | |
2809 | } | |
2810 | } | |
2811 | ||
2812 | /* | |
2813 | * Check if we are waiting for a close completion message. | |
2814 | */ | |
2815 | if (test_bit(ST_CLOSING, &portp->state)) { | |
2816 | rc = (int) cp->closearg; | |
2817 | if ((cp->close == 0) && (rc != 0)) { | |
2818 | if (rc > 0) | |
2819 | rc--; | |
2820 | cp->closearg = 0; | |
2821 | portp->rc = rc; | |
2822 | clear_bit(ST_CLOSING, &portp->state); | |
2823 | wake_up_interruptible(&portp->raw_wait); | |
2824 | } | |
2825 | } | |
2826 | ||
2827 | /* | |
2828 | * Check if we are waiting for a command completion message. We may | |
2829 | * need to copy out the command results associated with this command. | |
2830 | */ | |
2831 | if (test_bit(ST_CMDING, &portp->state)) { | |
2832 | rc = cp->status; | |
2833 | if ((cp->cmd == 0) && (rc != 0)) { | |
2834 | if (rc > 0) | |
2835 | rc--; | |
2836 | if (portp->argp != (void *) NULL) { | |
2837 | memcpy(portp->argp, (void *) &(cp->args[0]), | |
2838 | portp->argsize); | |
2839 | portp->argp = (void *) NULL; | |
2840 | } | |
2841 | cp->status = 0; | |
2842 | portp->rc = rc; | |
2843 | clear_bit(ST_CMDING, &portp->state); | |
2844 | stli_dodelaycmd(portp, cp); | |
2845 | wake_up_interruptible(&portp->raw_wait); | |
2846 | } | |
2847 | } | |
2848 | ||
2849 | /* | |
2850 | * Check for any notification messages ready. This includes lots of | |
2851 | * different types of events - RX chars ready, RX break received, | |
2852 | * TX data low or empty in the slave, modem signals changed state. | |
2853 | */ | |
2854 | donerx = 0; | |
2855 | ||
2856 | if (ap->notify) { | |
2857 | nt = ap->changed; | |
2858 | ap->notify = 0; | |
2859 | tty = portp->tty; | |
2860 | ||
2861 | if (nt.signal & SG_DCD) { | |
2862 | oldsigs = portp->sigs; | |
2863 | portp->sigs = stli_mktiocm(nt.sigvalue); | |
2864 | clear_bit(ST_GETSIGS, &portp->state); | |
2865 | if ((portp->sigs & TIOCM_CD) && | |
2866 | ((oldsigs & TIOCM_CD) == 0)) | |
2867 | wake_up_interruptible(&portp->open_wait); | |
2868 | if ((oldsigs & TIOCM_CD) && | |
2869 | ((portp->sigs & TIOCM_CD) == 0)) { | |
2870 | if (portp->flags & ASYNC_CHECK_CD) { | |
2871 | if (tty) | |
2872 | schedule_work(&portp->tqhangup); | |
2873 | } | |
2874 | } | |
2875 | } | |
2876 | ||
2877 | if (nt.data & DT_TXEMPTY) | |
2878 | clear_bit(ST_TXBUSY, &portp->state); | |
2879 | if (nt.data & (DT_TXEMPTY | DT_TXLOW)) { | |
2880 | if (tty != (struct tty_struct *) NULL) { | |
2881 | if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && | |
2882 | tty->ldisc.write_wakeup) { | |
2883 | (tty->ldisc.write_wakeup)(tty); | |
2884 | EBRDENABLE(brdp); | |
2885 | } | |
2886 | wake_up_interruptible(&tty->write_wait); | |
2887 | } | |
2888 | } | |
2889 | ||
2890 | if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) { | |
2891 | if (tty != (struct tty_struct *) NULL) { | |
33f0f88f AC |
2892 | tty_insert_flip_char(tty, 0, TTY_BREAK); |
2893 | if (portp->flags & ASYNC_SAK) { | |
2894 | do_SAK(tty); | |
2895 | EBRDENABLE(brdp); | |
1da177e4 | 2896 | } |
33f0f88f | 2897 | tty_schedule_flip(tty); |
1da177e4 LT |
2898 | } |
2899 | } | |
2900 | ||
2901 | if (nt.data & DT_RXBUSY) { | |
2902 | donerx++; | |
2903 | stli_read(brdp, portp); | |
2904 | } | |
2905 | } | |
2906 | ||
2907 | /* | |
2908 | * It might seem odd that we are checking for more RX chars here. | |
2909 | * But, we need to handle the case where the tty buffer was previously | |
2910 | * filled, but we had more characters to pass up. The slave will not | |
2911 | * send any more RX notify messages until the RX buffer has been emptied. | |
2912 | * But it will leave the service bits on (since the buffer is not empty). | |
2913 | * So from here we can try to process more RX chars. | |
2914 | */ | |
2915 | if ((!donerx) && test_bit(ST_RXING, &portp->state)) { | |
2916 | clear_bit(ST_RXING, &portp->state); | |
2917 | stli_read(brdp, portp); | |
2918 | } | |
2919 | ||
2920 | return((test_bit(ST_OPENING, &portp->state) || | |
2921 | test_bit(ST_CLOSING, &portp->state) || | |
2922 | test_bit(ST_CMDING, &portp->state) || | |
2923 | test_bit(ST_TXBUSY, &portp->state) || | |
2924 | test_bit(ST_RXING, &portp->state)) ? 0 : 1); | |
2925 | } | |
2926 | ||
2927 | /*****************************************************************************/ | |
2928 | ||
2929 | /* | |
2930 | * Service all ports on a particular board. Assumes that the boards | |
2931 | * shared memory is enabled, and that the page pointer is pointed | |
2932 | * at the cdk header structure. | |
2933 | */ | |
2934 | ||
2935 | static void stli_brdpoll(stlibrd_t *brdp, volatile cdkhdr_t *hdrp) | |
2936 | { | |
2937 | stliport_t *portp; | |
2938 | unsigned char hostbits[(STL_MAXCHANS / 8) + 1]; | |
2939 | unsigned char slavebits[(STL_MAXCHANS / 8) + 1]; | |
2940 | unsigned char *slavep; | |
2941 | int bitpos, bitat, bitsize; | |
2942 | int channr, nrdevs, slavebitchange; | |
2943 | ||
2944 | bitsize = brdp->bitsize; | |
2945 | nrdevs = brdp->nrdevs; | |
2946 | ||
2947 | /* | |
2948 | * Check if slave wants any service. Basically we try to do as | |
2949 | * little work as possible here. There are 2 levels of service | |
2950 | * bits. So if there is nothing to do we bail early. We check | |
2951 | * 8 service bits at a time in the inner loop, so we can bypass | |
2952 | * the lot if none of them want service. | |
2953 | */ | |
2954 | memcpy(&hostbits[0], (((unsigned char *) hdrp) + brdp->hostoffset), | |
2955 | bitsize); | |
2956 | ||
2957 | memset(&slavebits[0], 0, bitsize); | |
2958 | slavebitchange = 0; | |
2959 | ||
2960 | for (bitpos = 0; (bitpos < bitsize); bitpos++) { | |
2961 | if (hostbits[bitpos] == 0) | |
2962 | continue; | |
2963 | channr = bitpos * 8; | |
2964 | for (bitat = 0x1; (channr < nrdevs); channr++, bitat <<= 1) { | |
2965 | if (hostbits[bitpos] & bitat) { | |
2966 | portp = brdp->ports[(channr - 1)]; | |
2967 | if (stli_hostcmd(brdp, portp)) { | |
2968 | slavebitchange++; | |
2969 | slavebits[bitpos] |= bitat; | |
2970 | } | |
2971 | } | |
2972 | } | |
2973 | } | |
2974 | ||
2975 | /* | |
2976 | * If any of the ports are no longer busy then update them in the | |
2977 | * slave request bits. We need to do this after, since a host port | |
2978 | * service may initiate more slave requests. | |
2979 | */ | |
2980 | if (slavebitchange) { | |
2981 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
2982 | slavep = ((unsigned char *) hdrp) + brdp->slaveoffset; | |
2983 | for (bitpos = 0; (bitpos < bitsize); bitpos++) { | |
2984 | if (slavebits[bitpos]) | |
2985 | slavep[bitpos] &= ~slavebits[bitpos]; | |
2986 | } | |
2987 | } | |
2988 | } | |
2989 | ||
2990 | /*****************************************************************************/ | |
2991 | ||
2992 | /* | |
2993 | * Driver poll routine. This routine polls the boards in use and passes | |
2994 | * messages back up to host when necessary. This is actually very | |
2995 | * CPU efficient, since we will always have the kernel poll clock, it | |
2996 | * adds only a few cycles when idle (since board service can be | |
2997 | * determined very easily), but when loaded generates no interrupts | |
2998 | * (with their expensive associated context change). | |
2999 | */ | |
3000 | ||
3001 | static void stli_poll(unsigned long arg) | |
3002 | { | |
3003 | volatile cdkhdr_t *hdrp; | |
3004 | stlibrd_t *brdp; | |
3005 | int brdnr; | |
3006 | ||
3007 | stli_timerlist.expires = STLI_TIMEOUT; | |
3008 | add_timer(&stli_timerlist); | |
3009 | ||
3010 | /* | |
3011 | * Check each board and do any servicing required. | |
3012 | */ | |
3013 | for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) { | |
3014 | brdp = stli_brds[brdnr]; | |
3015 | if (brdp == (stlibrd_t *) NULL) | |
3016 | continue; | |
3017 | if ((brdp->state & BST_STARTED) == 0) | |
3018 | continue; | |
3019 | ||
3020 | EBRDENABLE(brdp); | |
3021 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
3022 | if (hdrp->hostreq) | |
3023 | stli_brdpoll(brdp, hdrp); | |
3024 | EBRDDISABLE(brdp); | |
3025 | } | |
3026 | } | |
3027 | ||
3028 | /*****************************************************************************/ | |
3029 | ||
3030 | /* | |
3031 | * Translate the termios settings into the port setting structure of | |
3032 | * the slave. | |
3033 | */ | |
3034 | ||
3035 | static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp) | |
3036 | { | |
3037 | #ifdef DEBUG | |
3038 | printk(KERN_DEBUG "stli_mkasyport(portp=%x,pp=%x,tiosp=%d)\n", | |
3039 | (int) portp, (int) pp, (int) tiosp); | |
3040 | #endif | |
3041 | ||
3042 | memset(pp, 0, sizeof(asyport_t)); | |
3043 | ||
3044 | /* | |
3045 | * Start of by setting the baud, char size, parity and stop bit info. | |
3046 | */ | |
3047 | pp->baudout = tiosp->c_cflag & CBAUD; | |
3048 | if (pp->baudout & CBAUDEX) { | |
3049 | pp->baudout &= ~CBAUDEX; | |
3050 | if ((pp->baudout < 1) || (pp->baudout > 4)) | |
3051 | tiosp->c_cflag &= ~CBAUDEX; | |
3052 | else | |
3053 | pp->baudout += 15; | |
3054 | } | |
3055 | pp->baudout = stli_baudrates[pp->baudout]; | |
3056 | if ((tiosp->c_cflag & CBAUD) == B38400) { | |
3057 | if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) | |
3058 | pp->baudout = 57600; | |
3059 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) | |
3060 | pp->baudout = 115200; | |
3061 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) | |
3062 | pp->baudout = 230400; | |
3063 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) | |
3064 | pp->baudout = 460800; | |
3065 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) | |
3066 | pp->baudout = (portp->baud_base / portp->custom_divisor); | |
3067 | } | |
3068 | if (pp->baudout > STL_MAXBAUD) | |
3069 | pp->baudout = STL_MAXBAUD; | |
3070 | pp->baudin = pp->baudout; | |
3071 | ||
3072 | switch (tiosp->c_cflag & CSIZE) { | |
3073 | case CS5: | |
3074 | pp->csize = 5; | |
3075 | break; | |
3076 | case CS6: | |
3077 | pp->csize = 6; | |
3078 | break; | |
3079 | case CS7: | |
3080 | pp->csize = 7; | |
3081 | break; | |
3082 | default: | |
3083 | pp->csize = 8; | |
3084 | break; | |
3085 | } | |
3086 | ||
3087 | if (tiosp->c_cflag & CSTOPB) | |
3088 | pp->stopbs = PT_STOP2; | |
3089 | else | |
3090 | pp->stopbs = PT_STOP1; | |
3091 | ||
3092 | if (tiosp->c_cflag & PARENB) { | |
3093 | if (tiosp->c_cflag & PARODD) | |
3094 | pp->parity = PT_ODDPARITY; | |
3095 | else | |
3096 | pp->parity = PT_EVENPARITY; | |
3097 | } else { | |
3098 | pp->parity = PT_NOPARITY; | |
3099 | } | |
3100 | ||
3101 | /* | |
3102 | * Set up any flow control options enabled. | |
3103 | */ | |
3104 | if (tiosp->c_iflag & IXON) { | |
3105 | pp->flow |= F_IXON; | |
3106 | if (tiosp->c_iflag & IXANY) | |
3107 | pp->flow |= F_IXANY; | |
3108 | } | |
3109 | if (tiosp->c_cflag & CRTSCTS) | |
3110 | pp->flow |= (F_RTSFLOW | F_CTSFLOW); | |
3111 | ||
3112 | pp->startin = tiosp->c_cc[VSTART]; | |
3113 | pp->stopin = tiosp->c_cc[VSTOP]; | |
3114 | pp->startout = tiosp->c_cc[VSTART]; | |
3115 | pp->stopout = tiosp->c_cc[VSTOP]; | |
3116 | ||
3117 | /* | |
3118 | * Set up the RX char marking mask with those RX error types we must | |
3119 | * catch. We can get the slave to help us out a little here, it will | |
3120 | * ignore parity errors and breaks for us, and mark parity errors in | |
3121 | * the data stream. | |
3122 | */ | |
3123 | if (tiosp->c_iflag & IGNPAR) | |
3124 | pp->iflag |= FI_IGNRXERRS; | |
3125 | if (tiosp->c_iflag & IGNBRK) | |
3126 | pp->iflag |= FI_IGNBREAK; | |
3127 | ||
3128 | portp->rxmarkmsk = 0; | |
3129 | if (tiosp->c_iflag & (INPCK | PARMRK)) | |
3130 | pp->iflag |= FI_1MARKRXERRS; | |
3131 | if (tiosp->c_iflag & BRKINT) | |
3132 | portp->rxmarkmsk |= BRKINT; | |
3133 | ||
3134 | /* | |
3135 | * Set up clocal processing as required. | |
3136 | */ | |
3137 | if (tiosp->c_cflag & CLOCAL) | |
3138 | portp->flags &= ~ASYNC_CHECK_CD; | |
3139 | else | |
3140 | portp->flags |= ASYNC_CHECK_CD; | |
3141 | ||
3142 | /* | |
3143 | * Transfer any persistent flags into the asyport structure. | |
3144 | */ | |
3145 | pp->pflag = (portp->pflag & 0xffff); | |
3146 | pp->vmin = (portp->pflag & P_RXIMIN) ? 1 : 0; | |
3147 | pp->vtime = (portp->pflag & P_RXITIME) ? 1 : 0; | |
3148 | pp->cc[1] = (portp->pflag & P_RXTHOLD) ? 1 : 0; | |
3149 | } | |
3150 | ||
3151 | /*****************************************************************************/ | |
3152 | ||
3153 | /* | |
3154 | * Construct a slave signals structure for setting the DTR and RTS | |
3155 | * signals as specified. | |
3156 | */ | |
3157 | ||
3158 | static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts) | |
3159 | { | |
3160 | #ifdef DEBUG | |
3161 | printk(KERN_DEBUG "stli_mkasysigs(sp=%x,dtr=%d,rts=%d)\n", | |
3162 | (int) sp, dtr, rts); | |
3163 | #endif | |
3164 | ||
3165 | memset(sp, 0, sizeof(asysigs_t)); | |
3166 | if (dtr >= 0) { | |
3167 | sp->signal |= SG_DTR; | |
3168 | sp->sigvalue |= ((dtr > 0) ? SG_DTR : 0); | |
3169 | } | |
3170 | if (rts >= 0) { | |
3171 | sp->signal |= SG_RTS; | |
3172 | sp->sigvalue |= ((rts > 0) ? SG_RTS : 0); | |
3173 | } | |
3174 | } | |
3175 | ||
3176 | /*****************************************************************************/ | |
3177 | ||
3178 | /* | |
3179 | * Convert the signals returned from the slave into a local TIOCM type | |
3180 | * signals value. We keep them locally in TIOCM format. | |
3181 | */ | |
3182 | ||
3183 | static long stli_mktiocm(unsigned long sigvalue) | |
3184 | { | |
3185 | long tiocm; | |
3186 | ||
3187 | #ifdef DEBUG | |
3188 | printk(KERN_DEBUG "stli_mktiocm(sigvalue=%x)\n", (int) sigvalue); | |
3189 | #endif | |
3190 | ||
3191 | tiocm = 0; | |
3192 | tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0); | |
3193 | tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0); | |
3194 | tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0); | |
3195 | tiocm |= ((sigvalue & SG_DSR) ? TIOCM_DSR : 0); | |
3196 | tiocm |= ((sigvalue & SG_DTR) ? TIOCM_DTR : 0); | |
3197 | tiocm |= ((sigvalue & SG_RTS) ? TIOCM_RTS : 0); | |
3198 | return(tiocm); | |
3199 | } | |
3200 | ||
3201 | /*****************************************************************************/ | |
3202 | ||
3203 | /* | |
3204 | * All panels and ports actually attached have been worked out. All | |
3205 | * we need to do here is set up the appropriate per port data structures. | |
3206 | */ | |
3207 | ||
3208 | static int stli_initports(stlibrd_t *brdp) | |
3209 | { | |
3210 | stliport_t *portp; | |
3211 | int i, panelnr, panelport; | |
3212 | ||
3213 | #ifdef DEBUG | |
3214 | printk(KERN_DEBUG "stli_initports(brdp=%x)\n", (int) brdp); | |
3215 | #endif | |
3216 | ||
3217 | for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { | |
b0b4ed72 TK |
3218 | portp = kzalloc(sizeof(stliport_t), GFP_KERNEL); |
3219 | if (!portp) { | |
1da177e4 LT |
3220 | printk("STALLION: failed to allocate port structure\n"); |
3221 | continue; | |
3222 | } | |
3223 | ||
1da177e4 LT |
3224 | portp->magic = STLI_PORTMAGIC; |
3225 | portp->portnr = i; | |
3226 | portp->brdnr = brdp->brdnr; | |
3227 | portp->panelnr = panelnr; | |
3228 | portp->baud_base = STL_BAUDBASE; | |
3229 | portp->close_delay = STL_CLOSEDELAY; | |
3230 | portp->closing_wait = 30 * HZ; | |
3231 | INIT_WORK(&portp->tqhangup, stli_dohangup, portp); | |
3232 | init_waitqueue_head(&portp->open_wait); | |
3233 | init_waitqueue_head(&portp->close_wait); | |
3234 | init_waitqueue_head(&portp->raw_wait); | |
3235 | panelport++; | |
3236 | if (panelport >= brdp->panels[panelnr]) { | |
3237 | panelport = 0; | |
3238 | panelnr++; | |
3239 | } | |
3240 | brdp->ports[i] = portp; | |
3241 | } | |
3242 | ||
3243 | return(0); | |
3244 | } | |
3245 | ||
3246 | /*****************************************************************************/ | |
3247 | ||
3248 | /* | |
3249 | * All the following routines are board specific hardware operations. | |
3250 | */ | |
3251 | ||
3252 | static void stli_ecpinit(stlibrd_t *brdp) | |
3253 | { | |
3254 | unsigned long memconf; | |
3255 | ||
3256 | #ifdef DEBUG | |
3257 | printk(KERN_DEBUG "stli_ecpinit(brdp=%d)\n", (int) brdp); | |
3258 | #endif | |
3259 | ||
3260 | outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); | |
3261 | udelay(10); | |
3262 | outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); | |
3263 | udelay(100); | |
3264 | ||
3265 | memconf = (brdp->memaddr & ECP_ATADDRMASK) >> ECP_ATADDRSHFT; | |
3266 | outb(memconf, (brdp->iobase + ECP_ATMEMAR)); | |
3267 | } | |
3268 | ||
3269 | /*****************************************************************************/ | |
3270 | ||
3271 | static void stli_ecpenable(stlibrd_t *brdp) | |
3272 | { | |
3273 | #ifdef DEBUG | |
3274 | printk(KERN_DEBUG "stli_ecpenable(brdp=%x)\n", (int) brdp); | |
3275 | #endif | |
3276 | outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR)); | |
3277 | } | |
3278 | ||
3279 | /*****************************************************************************/ | |
3280 | ||
3281 | static void stli_ecpdisable(stlibrd_t *brdp) | |
3282 | { | |
3283 | #ifdef DEBUG | |
3284 | printk(KERN_DEBUG "stli_ecpdisable(brdp=%x)\n", (int) brdp); | |
3285 | #endif | |
3286 | outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); | |
3287 | } | |
3288 | ||
3289 | /*****************************************************************************/ | |
3290 | ||
3291 | static char *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3292 | { | |
3293 | void *ptr; | |
3294 | unsigned char val; | |
3295 | ||
3296 | #ifdef DEBUG | |
3297 | printk(KERN_DEBUG "stli_ecpgetmemptr(brdp=%x,offset=%x)\n", (int) brdp, | |
3298 | (int) offset); | |
3299 | #endif | |
3300 | ||
3301 | if (offset > brdp->memsize) { | |
3302 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3303 | "range at line=%d(%d), brd=%d\n", | |
3304 | (int) offset, line, __LINE__, brdp->brdnr); | |
3305 | ptr = NULL; | |
3306 | val = 0; | |
3307 | } else { | |
3308 | ptr = brdp->membase + (offset % ECP_ATPAGESIZE); | |
3309 | val = (unsigned char) (offset / ECP_ATPAGESIZE); | |
3310 | } | |
3311 | outb(val, (brdp->iobase + ECP_ATMEMPR)); | |
3312 | return(ptr); | |
3313 | } | |
3314 | ||
3315 | /*****************************************************************************/ | |
3316 | ||
3317 | static void stli_ecpreset(stlibrd_t *brdp) | |
3318 | { | |
3319 | #ifdef DEBUG | |
3320 | printk(KERN_DEBUG "stli_ecpreset(brdp=%x)\n", (int) brdp); | |
3321 | #endif | |
3322 | ||
3323 | outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); | |
3324 | udelay(10); | |
3325 | outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); | |
3326 | udelay(500); | |
3327 | } | |
3328 | ||
3329 | /*****************************************************************************/ | |
3330 | ||
3331 | static void stli_ecpintr(stlibrd_t *brdp) | |
3332 | { | |
3333 | #ifdef DEBUG | |
3334 | printk(KERN_DEBUG "stli_ecpintr(brdp=%x)\n", (int) brdp); | |
3335 | #endif | |
3336 | outb(0x1, brdp->iobase); | |
3337 | } | |
3338 | ||
3339 | /*****************************************************************************/ | |
3340 | ||
3341 | /* | |
3342 | * The following set of functions act on ECP EISA boards. | |
3343 | */ | |
3344 | ||
3345 | static void stli_ecpeiinit(stlibrd_t *brdp) | |
3346 | { | |
3347 | unsigned long memconf; | |
3348 | ||
3349 | #ifdef DEBUG | |
3350 | printk(KERN_DEBUG "stli_ecpeiinit(brdp=%x)\n", (int) brdp); | |
3351 | #endif | |
3352 | ||
3353 | outb(0x1, (brdp->iobase + ECP_EIBRDENAB)); | |
3354 | outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); | |
3355 | udelay(10); | |
3356 | outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); | |
3357 | udelay(500); | |
3358 | ||
3359 | memconf = (brdp->memaddr & ECP_EIADDRMASKL) >> ECP_EIADDRSHFTL; | |
3360 | outb(memconf, (brdp->iobase + ECP_EIMEMARL)); | |
3361 | memconf = (brdp->memaddr & ECP_EIADDRMASKH) >> ECP_EIADDRSHFTH; | |
3362 | outb(memconf, (brdp->iobase + ECP_EIMEMARH)); | |
3363 | } | |
3364 | ||
3365 | /*****************************************************************************/ | |
3366 | ||
3367 | static void stli_ecpeienable(stlibrd_t *brdp) | |
3368 | { | |
3369 | outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR)); | |
3370 | } | |
3371 | ||
3372 | /*****************************************************************************/ | |
3373 | ||
3374 | static void stli_ecpeidisable(stlibrd_t *brdp) | |
3375 | { | |
3376 | outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); | |
3377 | } | |
3378 | ||
3379 | /*****************************************************************************/ | |
3380 | ||
3381 | static char *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3382 | { | |
3383 | void *ptr; | |
3384 | unsigned char val; | |
3385 | ||
3386 | #ifdef DEBUG | |
3387 | printk(KERN_DEBUG "stli_ecpeigetmemptr(brdp=%x,offset=%x,line=%d)\n", | |
3388 | (int) brdp, (int) offset, line); | |
3389 | #endif | |
3390 | ||
3391 | if (offset > brdp->memsize) { | |
3392 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3393 | "range at line=%d(%d), brd=%d\n", | |
3394 | (int) offset, line, __LINE__, brdp->brdnr); | |
3395 | ptr = NULL; | |
3396 | val = 0; | |
3397 | } else { | |
3398 | ptr = brdp->membase + (offset % ECP_EIPAGESIZE); | |
3399 | if (offset < ECP_EIPAGESIZE) | |
3400 | val = ECP_EIENABLE; | |
3401 | else | |
3402 | val = ECP_EIENABLE | 0x40; | |
3403 | } | |
3404 | outb(val, (brdp->iobase + ECP_EICONFR)); | |
3405 | return(ptr); | |
3406 | } | |
3407 | ||
3408 | /*****************************************************************************/ | |
3409 | ||
3410 | static void stli_ecpeireset(stlibrd_t *brdp) | |
3411 | { | |
3412 | outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); | |
3413 | udelay(10); | |
3414 | outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); | |
3415 | udelay(500); | |
3416 | } | |
3417 | ||
3418 | /*****************************************************************************/ | |
3419 | ||
3420 | /* | |
3421 | * The following set of functions act on ECP MCA boards. | |
3422 | */ | |
3423 | ||
3424 | static void stli_ecpmcenable(stlibrd_t *brdp) | |
3425 | { | |
3426 | outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR)); | |
3427 | } | |
3428 | ||
3429 | /*****************************************************************************/ | |
3430 | ||
3431 | static void stli_ecpmcdisable(stlibrd_t *brdp) | |
3432 | { | |
3433 | outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); | |
3434 | } | |
3435 | ||
3436 | /*****************************************************************************/ | |
3437 | ||
3438 | static char *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3439 | { | |
3440 | void *ptr; | |
3441 | unsigned char val; | |
3442 | ||
3443 | if (offset > brdp->memsize) { | |
3444 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3445 | "range at line=%d(%d), brd=%d\n", | |
3446 | (int) offset, line, __LINE__, brdp->brdnr); | |
3447 | ptr = NULL; | |
3448 | val = 0; | |
3449 | } else { | |
3450 | ptr = brdp->membase + (offset % ECP_MCPAGESIZE); | |
3451 | val = ((unsigned char) (offset / ECP_MCPAGESIZE)) | ECP_MCENABLE; | |
3452 | } | |
3453 | outb(val, (brdp->iobase + ECP_MCCONFR)); | |
3454 | return(ptr); | |
3455 | } | |
3456 | ||
3457 | /*****************************************************************************/ | |
3458 | ||
3459 | static void stli_ecpmcreset(stlibrd_t *brdp) | |
3460 | { | |
3461 | outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR)); | |
3462 | udelay(10); | |
3463 | outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); | |
3464 | udelay(500); | |
3465 | } | |
3466 | ||
3467 | /*****************************************************************************/ | |
3468 | ||
3469 | /* | |
3470 | * The following set of functions act on ECP PCI boards. | |
3471 | */ | |
3472 | ||
3473 | static void stli_ecppciinit(stlibrd_t *brdp) | |
3474 | { | |
3475 | #ifdef DEBUG | |
3476 | printk(KERN_DEBUG "stli_ecppciinit(brdp=%x)\n", (int) brdp); | |
3477 | #endif | |
3478 | ||
3479 | outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); | |
3480 | udelay(10); | |
3481 | outb(0, (brdp->iobase + ECP_PCICONFR)); | |
3482 | udelay(500); | |
3483 | } | |
3484 | ||
3485 | /*****************************************************************************/ | |
3486 | ||
3487 | static char *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3488 | { | |
3489 | void *ptr; | |
3490 | unsigned char val; | |
3491 | ||
3492 | #ifdef DEBUG | |
3493 | printk(KERN_DEBUG "stli_ecppcigetmemptr(brdp=%x,offset=%x,line=%d)\n", | |
3494 | (int) brdp, (int) offset, line); | |
3495 | #endif | |
3496 | ||
3497 | if (offset > brdp->memsize) { | |
3498 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3499 | "range at line=%d(%d), board=%d\n", | |
3500 | (int) offset, line, __LINE__, brdp->brdnr); | |
3501 | ptr = NULL; | |
3502 | val = 0; | |
3503 | } else { | |
3504 | ptr = brdp->membase + (offset % ECP_PCIPAGESIZE); | |
3505 | val = (offset / ECP_PCIPAGESIZE) << 1; | |
3506 | } | |
3507 | outb(val, (brdp->iobase + ECP_PCICONFR)); | |
3508 | return(ptr); | |
3509 | } | |
3510 | ||
3511 | /*****************************************************************************/ | |
3512 | ||
3513 | static void stli_ecppcireset(stlibrd_t *brdp) | |
3514 | { | |
3515 | outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); | |
3516 | udelay(10); | |
3517 | outb(0, (brdp->iobase + ECP_PCICONFR)); | |
3518 | udelay(500); | |
3519 | } | |
3520 | ||
3521 | /*****************************************************************************/ | |
3522 | ||
3523 | /* | |
3524 | * The following routines act on ONboards. | |
3525 | */ | |
3526 | ||
3527 | static void stli_onbinit(stlibrd_t *brdp) | |
3528 | { | |
3529 | unsigned long memconf; | |
3530 | ||
3531 | #ifdef DEBUG | |
3532 | printk(KERN_DEBUG "stli_onbinit(brdp=%d)\n", (int) brdp); | |
3533 | #endif | |
3534 | ||
3535 | outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); | |
3536 | udelay(10); | |
3537 | outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR)); | |
3538 | mdelay(1000); | |
3539 | ||
3540 | memconf = (brdp->memaddr & ONB_ATADDRMASK) >> ONB_ATADDRSHFT; | |
3541 | outb(memconf, (brdp->iobase + ONB_ATMEMAR)); | |
3542 | outb(0x1, brdp->iobase); | |
3543 | mdelay(1); | |
3544 | } | |
3545 | ||
3546 | /*****************************************************************************/ | |
3547 | ||
3548 | static void stli_onbenable(stlibrd_t *brdp) | |
3549 | { | |
3550 | #ifdef DEBUG | |
3551 | printk(KERN_DEBUG "stli_onbenable(brdp=%x)\n", (int) brdp); | |
3552 | #endif | |
3553 | outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR)); | |
3554 | } | |
3555 | ||
3556 | /*****************************************************************************/ | |
3557 | ||
3558 | static void stli_onbdisable(stlibrd_t *brdp) | |
3559 | { | |
3560 | #ifdef DEBUG | |
3561 | printk(KERN_DEBUG "stli_onbdisable(brdp=%x)\n", (int) brdp); | |
3562 | #endif | |
3563 | outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR)); | |
3564 | } | |
3565 | ||
3566 | /*****************************************************************************/ | |
3567 | ||
3568 | static char *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3569 | { | |
3570 | void *ptr; | |
3571 | ||
3572 | #ifdef DEBUG | |
3573 | printk(KERN_DEBUG "stli_onbgetmemptr(brdp=%x,offset=%x)\n", (int) brdp, | |
3574 | (int) offset); | |
3575 | #endif | |
3576 | ||
3577 | if (offset > brdp->memsize) { | |
3578 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3579 | "range at line=%d(%d), brd=%d\n", | |
3580 | (int) offset, line, __LINE__, brdp->brdnr); | |
3581 | ptr = NULL; | |
3582 | } else { | |
3583 | ptr = brdp->membase + (offset % ONB_ATPAGESIZE); | |
3584 | } | |
3585 | return(ptr); | |
3586 | } | |
3587 | ||
3588 | /*****************************************************************************/ | |
3589 | ||
3590 | static void stli_onbreset(stlibrd_t *brdp) | |
3591 | { | |
3592 | ||
3593 | #ifdef DEBUG | |
3594 | printk(KERN_DEBUG "stli_onbreset(brdp=%x)\n", (int) brdp); | |
3595 | #endif | |
3596 | ||
3597 | outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); | |
3598 | udelay(10); | |
3599 | outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR)); | |
3600 | mdelay(1000); | |
3601 | } | |
3602 | ||
3603 | /*****************************************************************************/ | |
3604 | ||
3605 | /* | |
3606 | * The following routines act on ONboard EISA. | |
3607 | */ | |
3608 | ||
3609 | static void stli_onbeinit(stlibrd_t *brdp) | |
3610 | { | |
3611 | unsigned long memconf; | |
3612 | ||
3613 | #ifdef DEBUG | |
3614 | printk(KERN_DEBUG "stli_onbeinit(brdp=%d)\n", (int) brdp); | |
3615 | #endif | |
3616 | ||
3617 | outb(0x1, (brdp->iobase + ONB_EIBRDENAB)); | |
3618 | outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); | |
3619 | udelay(10); | |
3620 | outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); | |
3621 | mdelay(1000); | |
3622 | ||
3623 | memconf = (brdp->memaddr & ONB_EIADDRMASKL) >> ONB_EIADDRSHFTL; | |
3624 | outb(memconf, (brdp->iobase + ONB_EIMEMARL)); | |
3625 | memconf = (brdp->memaddr & ONB_EIADDRMASKH) >> ONB_EIADDRSHFTH; | |
3626 | outb(memconf, (brdp->iobase + ONB_EIMEMARH)); | |
3627 | outb(0x1, brdp->iobase); | |
3628 | mdelay(1); | |
3629 | } | |
3630 | ||
3631 | /*****************************************************************************/ | |
3632 | ||
3633 | static void stli_onbeenable(stlibrd_t *brdp) | |
3634 | { | |
3635 | #ifdef DEBUG | |
3636 | printk(KERN_DEBUG "stli_onbeenable(brdp=%x)\n", (int) brdp); | |
3637 | #endif | |
3638 | outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR)); | |
3639 | } | |
3640 | ||
3641 | /*****************************************************************************/ | |
3642 | ||
3643 | static void stli_onbedisable(stlibrd_t *brdp) | |
3644 | { | |
3645 | #ifdef DEBUG | |
3646 | printk(KERN_DEBUG "stli_onbedisable(brdp=%x)\n", (int) brdp); | |
3647 | #endif | |
3648 | outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); | |
3649 | } | |
3650 | ||
3651 | /*****************************************************************************/ | |
3652 | ||
3653 | static char *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3654 | { | |
3655 | void *ptr; | |
3656 | unsigned char val; | |
3657 | ||
3658 | #ifdef DEBUG | |
3659 | printk(KERN_DEBUG "stli_onbegetmemptr(brdp=%x,offset=%x,line=%d)\n", | |
3660 | (int) brdp, (int) offset, line); | |
3661 | #endif | |
3662 | ||
3663 | if (offset > brdp->memsize) { | |
3664 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3665 | "range at line=%d(%d), brd=%d\n", | |
3666 | (int) offset, line, __LINE__, brdp->brdnr); | |
3667 | ptr = NULL; | |
3668 | val = 0; | |
3669 | } else { | |
3670 | ptr = brdp->membase + (offset % ONB_EIPAGESIZE); | |
3671 | if (offset < ONB_EIPAGESIZE) | |
3672 | val = ONB_EIENABLE; | |
3673 | else | |
3674 | val = ONB_EIENABLE | 0x40; | |
3675 | } | |
3676 | outb(val, (brdp->iobase + ONB_EICONFR)); | |
3677 | return(ptr); | |
3678 | } | |
3679 | ||
3680 | /*****************************************************************************/ | |
3681 | ||
3682 | static void stli_onbereset(stlibrd_t *brdp) | |
3683 | { | |
3684 | ||
3685 | #ifdef DEBUG | |
3686 | printk(KERN_ERR "stli_onbereset(brdp=%x)\n", (int) brdp); | |
3687 | #endif | |
3688 | ||
3689 | outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); | |
3690 | udelay(10); | |
3691 | outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); | |
3692 | mdelay(1000); | |
3693 | } | |
3694 | ||
3695 | /*****************************************************************************/ | |
3696 | ||
3697 | /* | |
3698 | * The following routines act on Brumby boards. | |
3699 | */ | |
3700 | ||
3701 | static void stli_bbyinit(stlibrd_t *brdp) | |
3702 | { | |
3703 | ||
3704 | #ifdef DEBUG | |
3705 | printk(KERN_ERR "stli_bbyinit(brdp=%d)\n", (int) brdp); | |
3706 | #endif | |
3707 | ||
3708 | outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); | |
3709 | udelay(10); | |
3710 | outb(0, (brdp->iobase + BBY_ATCONFR)); | |
3711 | mdelay(1000); | |
3712 | outb(0x1, brdp->iobase); | |
3713 | mdelay(1); | |
3714 | } | |
3715 | ||
3716 | /*****************************************************************************/ | |
3717 | ||
3718 | static char *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3719 | { | |
3720 | void *ptr; | |
3721 | unsigned char val; | |
3722 | ||
3723 | #ifdef DEBUG | |
3724 | printk(KERN_ERR "stli_bbygetmemptr(brdp=%x,offset=%x)\n", (int) brdp, | |
3725 | (int) offset); | |
3726 | #endif | |
3727 | ||
3728 | if (offset > brdp->memsize) { | |
3729 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3730 | "range at line=%d(%d), brd=%d\n", | |
3731 | (int) offset, line, __LINE__, brdp->brdnr); | |
3732 | ptr = NULL; | |
3733 | val = 0; | |
3734 | } else { | |
3735 | ptr = brdp->membase + (offset % BBY_PAGESIZE); | |
3736 | val = (unsigned char) (offset / BBY_PAGESIZE); | |
3737 | } | |
3738 | outb(val, (brdp->iobase + BBY_ATCONFR)); | |
3739 | return(ptr); | |
3740 | } | |
3741 | ||
3742 | /*****************************************************************************/ | |
3743 | ||
3744 | static void stli_bbyreset(stlibrd_t *brdp) | |
3745 | { | |
3746 | ||
3747 | #ifdef DEBUG | |
3748 | printk(KERN_DEBUG "stli_bbyreset(brdp=%x)\n", (int) brdp); | |
3749 | #endif | |
3750 | ||
3751 | outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); | |
3752 | udelay(10); | |
3753 | outb(0, (brdp->iobase + BBY_ATCONFR)); | |
3754 | mdelay(1000); | |
3755 | } | |
3756 | ||
3757 | /*****************************************************************************/ | |
3758 | ||
3759 | /* | |
3760 | * The following routines act on original old Stallion boards. | |
3761 | */ | |
3762 | ||
3763 | static void stli_stalinit(stlibrd_t *brdp) | |
3764 | { | |
3765 | ||
3766 | #ifdef DEBUG | |
3767 | printk(KERN_DEBUG "stli_stalinit(brdp=%d)\n", (int) brdp); | |
3768 | #endif | |
3769 | ||
3770 | outb(0x1, brdp->iobase); | |
3771 | mdelay(1000); | |
3772 | } | |
3773 | ||
3774 | /*****************************************************************************/ | |
3775 | ||
3776 | static char *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) | |
3777 | { | |
3778 | void *ptr; | |
3779 | ||
3780 | #ifdef DEBUG | |
3781 | printk(KERN_DEBUG "stli_stalgetmemptr(brdp=%x,offset=%x)\n", (int) brdp, | |
3782 | (int) offset); | |
3783 | #endif | |
3784 | ||
3785 | if (offset > brdp->memsize) { | |
3786 | printk(KERN_ERR "STALLION: shared memory pointer=%x out of " | |
3787 | "range at line=%d(%d), brd=%d\n", | |
3788 | (int) offset, line, __LINE__, brdp->brdnr); | |
3789 | ptr = NULL; | |
3790 | } else { | |
3791 | ptr = brdp->membase + (offset % STAL_PAGESIZE); | |
3792 | } | |
3793 | return(ptr); | |
3794 | } | |
3795 | ||
3796 | /*****************************************************************************/ | |
3797 | ||
3798 | static void stli_stalreset(stlibrd_t *brdp) | |
3799 | { | |
3800 | volatile unsigned long *vecp; | |
3801 | ||
3802 | #ifdef DEBUG | |
3803 | printk(KERN_DEBUG "stli_stalreset(brdp=%x)\n", (int) brdp); | |
3804 | #endif | |
3805 | ||
3806 | vecp = (volatile unsigned long *) (brdp->membase + 0x30); | |
3807 | *vecp = 0xffff0000; | |
3808 | outb(0, brdp->iobase); | |
3809 | mdelay(1000); | |
3810 | } | |
3811 | ||
3812 | /*****************************************************************************/ | |
3813 | ||
3814 | /* | |
3815 | * Try to find an ECP board and initialize it. This handles only ECP | |
3816 | * board types. | |
3817 | */ | |
3818 | ||
3819 | static int stli_initecp(stlibrd_t *brdp) | |
3820 | { | |
3821 | cdkecpsig_t sig; | |
3822 | cdkecpsig_t *sigsp; | |
3823 | unsigned int status, nxtid; | |
3824 | char *name; | |
3825 | int panelnr, nrports; | |
3826 | ||
3827 | #ifdef DEBUG | |
3828 | printk(KERN_DEBUG "stli_initecp(brdp=%x)\n", (int) brdp); | |
3829 | #endif | |
3830 | ||
3831 | if (!request_region(brdp->iobase, brdp->iosize, "istallion")) | |
3832 | return -EIO; | |
3833 | ||
3834 | if ((brdp->iobase == 0) || (brdp->memaddr == 0)) | |
3835 | { | |
3836 | release_region(brdp->iobase, brdp->iosize); | |
3837 | return(-ENODEV); | |
3838 | } | |
3839 | ||
3840 | brdp->iosize = ECP_IOSIZE; | |
3841 | ||
3842 | /* | |
3843 | * Based on the specific board type setup the common vars to access | |
3844 | * and enable shared memory. Set all board specific information now | |
3845 | * as well. | |
3846 | */ | |
3847 | switch (brdp->brdtype) { | |
3848 | case BRD_ECP: | |
3849 | brdp->membase = (void *) brdp->memaddr; | |
3850 | brdp->memsize = ECP_MEMSIZE; | |
3851 | brdp->pagesize = ECP_ATPAGESIZE; | |
3852 | brdp->init = stli_ecpinit; | |
3853 | brdp->enable = stli_ecpenable; | |
3854 | brdp->reenable = stli_ecpenable; | |
3855 | brdp->disable = stli_ecpdisable; | |
3856 | brdp->getmemptr = stli_ecpgetmemptr; | |
3857 | brdp->intr = stli_ecpintr; | |
3858 | brdp->reset = stli_ecpreset; | |
3859 | name = "serial(EC8/64)"; | |
3860 | break; | |
3861 | ||
3862 | case BRD_ECPE: | |
3863 | brdp->membase = (void *) brdp->memaddr; | |
3864 | brdp->memsize = ECP_MEMSIZE; | |
3865 | brdp->pagesize = ECP_EIPAGESIZE; | |
3866 | brdp->init = stli_ecpeiinit; | |
3867 | brdp->enable = stli_ecpeienable; | |
3868 | brdp->reenable = stli_ecpeienable; | |
3869 | brdp->disable = stli_ecpeidisable; | |
3870 | brdp->getmemptr = stli_ecpeigetmemptr; | |
3871 | brdp->intr = stli_ecpintr; | |
3872 | brdp->reset = stli_ecpeireset; | |
3873 | name = "serial(EC8/64-EI)"; | |
3874 | break; | |
3875 | ||
3876 | case BRD_ECPMC: | |
3877 | brdp->membase = (void *) brdp->memaddr; | |
3878 | brdp->memsize = ECP_MEMSIZE; | |
3879 | brdp->pagesize = ECP_MCPAGESIZE; | |
3880 | brdp->init = NULL; | |
3881 | brdp->enable = stli_ecpmcenable; | |
3882 | brdp->reenable = stli_ecpmcenable; | |
3883 | brdp->disable = stli_ecpmcdisable; | |
3884 | brdp->getmemptr = stli_ecpmcgetmemptr; | |
3885 | brdp->intr = stli_ecpintr; | |
3886 | brdp->reset = stli_ecpmcreset; | |
3887 | name = "serial(EC8/64-MCA)"; | |
3888 | break; | |
3889 | ||
3890 | case BRD_ECPPCI: | |
3891 | brdp->membase = (void *) brdp->memaddr; | |
3892 | brdp->memsize = ECP_PCIMEMSIZE; | |
3893 | brdp->pagesize = ECP_PCIPAGESIZE; | |
3894 | brdp->init = stli_ecppciinit; | |
3895 | brdp->enable = NULL; | |
3896 | brdp->reenable = NULL; | |
3897 | brdp->disable = NULL; | |
3898 | brdp->getmemptr = stli_ecppcigetmemptr; | |
3899 | brdp->intr = stli_ecpintr; | |
3900 | brdp->reset = stli_ecppcireset; | |
3901 | name = "serial(EC/RA-PCI)"; | |
3902 | break; | |
3903 | ||
3904 | default: | |
3905 | release_region(brdp->iobase, brdp->iosize); | |
3906 | return(-EINVAL); | |
3907 | } | |
3908 | ||
3909 | /* | |
3910 | * The per-board operations structure is all set up, so now let's go | |
3911 | * and get the board operational. Firstly initialize board configuration | |
3912 | * registers. Set the memory mapping info so we can get at the boards | |
3913 | * shared memory. | |
3914 | */ | |
3915 | EBRDINIT(brdp); | |
3916 | ||
3917 | brdp->membase = ioremap(brdp->memaddr, brdp->memsize); | |
3918 | if (brdp->membase == (void *) NULL) | |
3919 | { | |
3920 | release_region(brdp->iobase, brdp->iosize); | |
3921 | return(-ENOMEM); | |
3922 | } | |
3923 | ||
3924 | /* | |
3925 | * Now that all specific code is set up, enable the shared memory and | |
3926 | * look for the a signature area that will tell us exactly what board | |
3927 | * this is, and what it is connected to it. | |
3928 | */ | |
3929 | EBRDENABLE(brdp); | |
3930 | sigsp = (cdkecpsig_t *) EBRDGETMEMPTR(brdp, CDK_SIGADDR); | |
3931 | memcpy(&sig, sigsp, sizeof(cdkecpsig_t)); | |
3932 | EBRDDISABLE(brdp); | |
3933 | ||
3934 | #if 0 | |
3935 | printk("%s(%d): sig-> magic=%x rom=%x panel=%x,%x,%x,%x,%x,%x,%x,%x\n", | |
3936 | __FILE__, __LINE__, (int) sig.magic, sig.romver, sig.panelid[0], | |
3937 | (int) sig.panelid[1], (int) sig.panelid[2], | |
3938 | (int) sig.panelid[3], (int) sig.panelid[4], | |
3939 | (int) sig.panelid[5], (int) sig.panelid[6], | |
3940 | (int) sig.panelid[7]); | |
3941 | #endif | |
3942 | ||
3943 | if (sig.magic != ECP_MAGIC) | |
3944 | { | |
3945 | release_region(brdp->iobase, brdp->iosize); | |
3946 | return(-ENODEV); | |
3947 | } | |
3948 | ||
3949 | /* | |
3950 | * Scan through the signature looking at the panels connected to the | |
3951 | * board. Calculate the total number of ports as we go. | |
3952 | */ | |
3953 | for (panelnr = 0, nxtid = 0; (panelnr < STL_MAXPANELS); panelnr++) { | |
3954 | status = sig.panelid[nxtid]; | |
3955 | if ((status & ECH_PNLIDMASK) != nxtid) | |
3956 | break; | |
3957 | ||
3958 | brdp->panelids[panelnr] = status; | |
3959 | nrports = (status & ECH_PNL16PORT) ? 16 : 8; | |
3960 | if ((nrports == 16) && ((status & ECH_PNLXPID) == 0)) | |
3961 | nxtid++; | |
3962 | brdp->panels[panelnr] = nrports; | |
3963 | brdp->nrports += nrports; | |
3964 | nxtid++; | |
3965 | brdp->nrpanels++; | |
3966 | } | |
3967 | ||
3968 | ||
3969 | brdp->state |= BST_FOUND; | |
3970 | return(0); | |
3971 | } | |
3972 | ||
3973 | /*****************************************************************************/ | |
3974 | ||
3975 | /* | |
3976 | * Try to find an ONboard, Brumby or Stallion board and initialize it. | |
3977 | * This handles only these board types. | |
3978 | */ | |
3979 | ||
3980 | static int stli_initonb(stlibrd_t *brdp) | |
3981 | { | |
3982 | cdkonbsig_t sig; | |
3983 | cdkonbsig_t *sigsp; | |
3984 | char *name; | |
3985 | int i; | |
3986 | ||
3987 | #ifdef DEBUG | |
3988 | printk(KERN_DEBUG "stli_initonb(brdp=%x)\n", (int) brdp); | |
3989 | #endif | |
3990 | ||
3991 | /* | |
3992 | * Do a basic sanity check on the IO and memory addresses. | |
3993 | */ | |
3994 | if ((brdp->iobase == 0) || (brdp->memaddr == 0)) | |
3995 | return(-ENODEV); | |
3996 | ||
3997 | brdp->iosize = ONB_IOSIZE; | |
3998 | ||
3999 | if (!request_region(brdp->iobase, brdp->iosize, "istallion")) | |
4000 | return -EIO; | |
4001 | ||
4002 | /* | |
4003 | * Based on the specific board type setup the common vars to access | |
4004 | * and enable shared memory. Set all board specific information now | |
4005 | * as well. | |
4006 | */ | |
4007 | switch (brdp->brdtype) { | |
4008 | case BRD_ONBOARD: | |
4009 | case BRD_ONBOARD32: | |
4010 | case BRD_ONBOARD2: | |
4011 | case BRD_ONBOARD2_32: | |
4012 | case BRD_ONBOARDRS: | |
4013 | brdp->membase = (void *) brdp->memaddr; | |
4014 | brdp->memsize = ONB_MEMSIZE; | |
4015 | brdp->pagesize = ONB_ATPAGESIZE; | |
4016 | brdp->init = stli_onbinit; | |
4017 | brdp->enable = stli_onbenable; | |
4018 | brdp->reenable = stli_onbenable; | |
4019 | brdp->disable = stli_onbdisable; | |
4020 | brdp->getmemptr = stli_onbgetmemptr; | |
4021 | brdp->intr = stli_ecpintr; | |
4022 | brdp->reset = stli_onbreset; | |
4023 | if (brdp->memaddr > 0x100000) | |
4024 | brdp->enabval = ONB_MEMENABHI; | |
4025 | else | |
4026 | brdp->enabval = ONB_MEMENABLO; | |
4027 | name = "serial(ONBoard)"; | |
4028 | break; | |
4029 | ||
4030 | case BRD_ONBOARDE: | |
4031 | brdp->membase = (void *) brdp->memaddr; | |
4032 | brdp->memsize = ONB_EIMEMSIZE; | |
4033 | brdp->pagesize = ONB_EIPAGESIZE; | |
4034 | brdp->init = stli_onbeinit; | |
4035 | brdp->enable = stli_onbeenable; | |
4036 | brdp->reenable = stli_onbeenable; | |
4037 | brdp->disable = stli_onbedisable; | |
4038 | brdp->getmemptr = stli_onbegetmemptr; | |
4039 | brdp->intr = stli_ecpintr; | |
4040 | brdp->reset = stli_onbereset; | |
4041 | name = "serial(ONBoard/E)"; | |
4042 | break; | |
4043 | ||
4044 | case BRD_BRUMBY4: | |
4045 | case BRD_BRUMBY8: | |
4046 | case BRD_BRUMBY16: | |
4047 | brdp->membase = (void *) brdp->memaddr; | |
4048 | brdp->memsize = BBY_MEMSIZE; | |
4049 | brdp->pagesize = BBY_PAGESIZE; | |
4050 | brdp->init = stli_bbyinit; | |
4051 | brdp->enable = NULL; | |
4052 | brdp->reenable = NULL; | |
4053 | brdp->disable = NULL; | |
4054 | brdp->getmemptr = stli_bbygetmemptr; | |
4055 | brdp->intr = stli_ecpintr; | |
4056 | brdp->reset = stli_bbyreset; | |
4057 | name = "serial(Brumby)"; | |
4058 | break; | |
4059 | ||
4060 | case BRD_STALLION: | |
4061 | brdp->membase = (void *) brdp->memaddr; | |
4062 | brdp->memsize = STAL_MEMSIZE; | |
4063 | brdp->pagesize = STAL_PAGESIZE; | |
4064 | brdp->init = stli_stalinit; | |
4065 | brdp->enable = NULL; | |
4066 | brdp->reenable = NULL; | |
4067 | brdp->disable = NULL; | |
4068 | brdp->getmemptr = stli_stalgetmemptr; | |
4069 | brdp->intr = stli_ecpintr; | |
4070 | brdp->reset = stli_stalreset; | |
4071 | name = "serial(Stallion)"; | |
4072 | break; | |
4073 | ||
4074 | default: | |
4075 | release_region(brdp->iobase, brdp->iosize); | |
4076 | return(-EINVAL); | |
4077 | } | |
4078 | ||
4079 | /* | |
4080 | * The per-board operations structure is all set up, so now let's go | |
4081 | * and get the board operational. Firstly initialize board configuration | |
4082 | * registers. Set the memory mapping info so we can get at the boards | |
4083 | * shared memory. | |
4084 | */ | |
4085 | EBRDINIT(brdp); | |
4086 | ||
4087 | brdp->membase = ioremap(brdp->memaddr, brdp->memsize); | |
4088 | if (brdp->membase == (void *) NULL) | |
4089 | { | |
4090 | release_region(brdp->iobase, brdp->iosize); | |
4091 | return(-ENOMEM); | |
4092 | } | |
4093 | ||
4094 | /* | |
4095 | * Now that all specific code is set up, enable the shared memory and | |
4096 | * look for the a signature area that will tell us exactly what board | |
4097 | * this is, and how many ports. | |
4098 | */ | |
4099 | EBRDENABLE(brdp); | |
4100 | sigsp = (cdkonbsig_t *) EBRDGETMEMPTR(brdp, CDK_SIGADDR); | |
4101 | memcpy(&sig, sigsp, sizeof(cdkonbsig_t)); | |
4102 | EBRDDISABLE(brdp); | |
4103 | ||
4104 | #if 0 | |
4105 | printk("%s(%d): sig-> magic=%x:%x:%x:%x romver=%x amask=%x:%x:%x\n", | |
4106 | __FILE__, __LINE__, sig.magic0, sig.magic1, sig.magic2, | |
4107 | sig.magic3, sig.romver, sig.amask0, sig.amask1, sig.amask2); | |
4108 | #endif | |
4109 | ||
4110 | if ((sig.magic0 != ONB_MAGIC0) || (sig.magic1 != ONB_MAGIC1) || | |
4111 | (sig.magic2 != ONB_MAGIC2) || (sig.magic3 != ONB_MAGIC3)) | |
4112 | { | |
4113 | release_region(brdp->iobase, brdp->iosize); | |
4114 | return(-ENODEV); | |
4115 | } | |
4116 | ||
4117 | /* | |
4118 | * Scan through the signature alive mask and calculate how many ports | |
4119 | * there are on this board. | |
4120 | */ | |
4121 | brdp->nrpanels = 1; | |
4122 | if (sig.amask1) { | |
4123 | brdp->nrports = 32; | |
4124 | } else { | |
4125 | for (i = 0; (i < 16); i++) { | |
4126 | if (((sig.amask0 << i) & 0x8000) == 0) | |
4127 | break; | |
4128 | } | |
4129 | brdp->nrports = i; | |
4130 | } | |
4131 | brdp->panels[0] = brdp->nrports; | |
4132 | ||
4133 | ||
4134 | brdp->state |= BST_FOUND; | |
4135 | return(0); | |
4136 | } | |
4137 | ||
4138 | /*****************************************************************************/ | |
4139 | ||
4140 | /* | |
4141 | * Start up a running board. This routine is only called after the | |
4142 | * code has been down loaded to the board and is operational. It will | |
4143 | * read in the memory map, and get the show on the road... | |
4144 | */ | |
4145 | ||
4146 | static int stli_startbrd(stlibrd_t *brdp) | |
4147 | { | |
4148 | volatile cdkhdr_t *hdrp; | |
4149 | volatile cdkmem_t *memp; | |
4150 | volatile cdkasy_t *ap; | |
4151 | unsigned long flags; | |
4152 | stliport_t *portp; | |
4153 | int portnr, nrdevs, i, rc; | |
4154 | ||
4155 | #ifdef DEBUG | |
4156 | printk(KERN_DEBUG "stli_startbrd(brdp=%x)\n", (int) brdp); | |
4157 | #endif | |
4158 | ||
4159 | rc = 0; | |
4160 | ||
4161 | save_flags(flags); | |
4162 | cli(); | |
4163 | EBRDENABLE(brdp); | |
4164 | hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); | |
4165 | nrdevs = hdrp->nrdevs; | |
4166 | ||
4167 | #if 0 | |
4168 | printk("%s(%d): CDK version %d.%d.%d --> " | |
4169 | "nrdevs=%d memp=%x hostp=%x slavep=%x\n", | |
4170 | __FILE__, __LINE__, hdrp->ver_release, hdrp->ver_modification, | |
4171 | hdrp->ver_fix, nrdevs, (int) hdrp->memp, (int) hdrp->hostp, | |
4172 | (int) hdrp->slavep); | |
4173 | #endif | |
4174 | ||
4175 | if (nrdevs < (brdp->nrports + 1)) { | |
4176 | printk(KERN_ERR "STALLION: slave failed to allocate memory for " | |
4177 | "all devices, devices=%d\n", nrdevs); | |
4178 | brdp->nrports = nrdevs - 1; | |
4179 | } | |
4180 | brdp->nrdevs = nrdevs; | |
4181 | brdp->hostoffset = hdrp->hostp - CDK_CDKADDR; | |
4182 | brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR; | |
4183 | brdp->bitsize = (nrdevs + 7) / 8; | |
4184 | memp = (volatile cdkmem_t *) hdrp->memp; | |
4185 | if (((unsigned long) memp) > brdp->memsize) { | |
4186 | printk(KERN_ERR "STALLION: corrupted shared memory region?\n"); | |
4187 | rc = -EIO; | |
4188 | goto stli_donestartup; | |
4189 | } | |
4190 | memp = (volatile cdkmem_t *) EBRDGETMEMPTR(brdp, (unsigned long) memp); | |
4191 | if (memp->dtype != TYP_ASYNCTRL) { | |
4192 | printk(KERN_ERR "STALLION: no slave control device found\n"); | |
4193 | goto stli_donestartup; | |
4194 | } | |
4195 | memp++; | |
4196 | ||
4197 | /* | |
4198 | * Cycle through memory allocation of each port. We are guaranteed to | |
4199 | * have all ports inside the first page of slave window, so no need to | |
4200 | * change pages while reading memory map. | |
4201 | */ | |
4202 | for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) { | |
4203 | if (memp->dtype != TYP_ASYNC) | |
4204 | break; | |
4205 | portp = brdp->ports[portnr]; | |
4206 | if (portp == (stliport_t *) NULL) | |
4207 | break; | |
4208 | portp->devnr = i; | |
4209 | portp->addr = memp->offset; | |
4210 | portp->reqbit = (unsigned char) (0x1 << (i * 8 / nrdevs)); | |
4211 | portp->portidx = (unsigned char) (i / 8); | |
4212 | portp->portbit = (unsigned char) (0x1 << (i % 8)); | |
4213 | } | |
4214 | ||
4215 | hdrp->slavereq = 0xff; | |
4216 | ||
4217 | /* | |
4218 | * For each port setup a local copy of the RX and TX buffer offsets | |
4219 | * and sizes. We do this separate from the above, because we need to | |
4220 | * move the shared memory page... | |
4221 | */ | |
4222 | for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) { | |
4223 | portp = brdp->ports[portnr]; | |
4224 | if (portp == (stliport_t *) NULL) | |
4225 | break; | |
4226 | if (portp->addr == 0) | |
4227 | break; | |
4228 | ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr); | |
4229 | if (ap != (volatile cdkasy_t *) NULL) { | |
4230 | portp->rxsize = ap->rxq.size; | |
4231 | portp->txsize = ap->txq.size; | |
4232 | portp->rxoffset = ap->rxq.offset; | |
4233 | portp->txoffset = ap->txq.offset; | |
4234 | } | |
4235 | } | |
4236 | ||
4237 | stli_donestartup: | |
4238 | EBRDDISABLE(brdp); | |
4239 | restore_flags(flags); | |
4240 | ||
4241 | if (rc == 0) | |
4242 | brdp->state |= BST_STARTED; | |
4243 | ||
4244 | if (! stli_timeron) { | |
4245 | stli_timeron++; | |
4246 | stli_timerlist.expires = STLI_TIMEOUT; | |
4247 | add_timer(&stli_timerlist); | |
4248 | } | |
4249 | ||
4250 | return(rc); | |
4251 | } | |
4252 | ||
4253 | /*****************************************************************************/ | |
4254 | ||
4255 | /* | |
4256 | * Probe and initialize the specified board. | |
4257 | */ | |
4258 | ||
4259 | static int __init stli_brdinit(stlibrd_t *brdp) | |
4260 | { | |
4261 | #ifdef DEBUG | |
4262 | printk(KERN_DEBUG "stli_brdinit(brdp=%x)\n", (int) brdp); | |
4263 | #endif | |
4264 | ||
4265 | stli_brds[brdp->brdnr] = brdp; | |
4266 | ||
4267 | switch (brdp->brdtype) { | |
4268 | case BRD_ECP: | |
4269 | case BRD_ECPE: | |
4270 | case BRD_ECPMC: | |
4271 | case BRD_ECPPCI: | |
4272 | stli_initecp(brdp); | |
4273 | break; | |
4274 | case BRD_ONBOARD: | |
4275 | case BRD_ONBOARDE: | |
4276 | case BRD_ONBOARD2: | |
4277 | case BRD_ONBOARD32: | |
4278 | case BRD_ONBOARD2_32: | |
4279 | case BRD_ONBOARDRS: | |
4280 | case BRD_BRUMBY4: | |
4281 | case BRD_BRUMBY8: | |
4282 | case BRD_BRUMBY16: | |
4283 | case BRD_STALLION: | |
4284 | stli_initonb(brdp); | |
4285 | break; | |
4286 | case BRD_EASYIO: | |
4287 | case BRD_ECH: | |
4288 | case BRD_ECHMC: | |
4289 | case BRD_ECHPCI: | |
4290 | printk(KERN_ERR "STALLION: %s board type not supported in " | |
4291 | "this driver\n", stli_brdnames[brdp->brdtype]); | |
4292 | return(ENODEV); | |
4293 | default: | |
4294 | printk(KERN_ERR "STALLION: board=%d is unknown board " | |
4295 | "type=%d\n", brdp->brdnr, brdp->brdtype); | |
4296 | return(ENODEV); | |
4297 | } | |
4298 | ||
4299 | if ((brdp->state & BST_FOUND) == 0) { | |
4300 | printk(KERN_ERR "STALLION: %s board not found, board=%d " | |
4301 | "io=%x mem=%x\n", | |
4302 | stli_brdnames[brdp->brdtype], brdp->brdnr, | |
4303 | brdp->iobase, (int) brdp->memaddr); | |
4304 | return(ENODEV); | |
4305 | } | |
4306 | ||
4307 | stli_initports(brdp); | |
4308 | printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x " | |
4309 | "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], | |
4310 | brdp->brdnr, brdp->iobase, (int) brdp->memaddr, | |
4311 | brdp->nrpanels, brdp->nrports); | |
4312 | return(0); | |
4313 | } | |
4314 | ||
4315 | /*****************************************************************************/ | |
4316 | ||
4317 | /* | |
4318 | * Probe around trying to find where the EISA boards shared memory | |
4319 | * might be. This is a bit if hack, but it is the best we can do. | |
4320 | */ | |
4321 | ||
4322 | static int stli_eisamemprobe(stlibrd_t *brdp) | |
4323 | { | |
4324 | cdkecpsig_t ecpsig, *ecpsigp; | |
4325 | cdkonbsig_t onbsig, *onbsigp; | |
4326 | int i, foundit; | |
4327 | ||
4328 | #ifdef DEBUG | |
4329 | printk(KERN_DEBUG "stli_eisamemprobe(brdp=%x)\n", (int) brdp); | |
4330 | #endif | |
4331 | ||
4332 | /* | |
4333 | * First up we reset the board, to get it into a known state. There | |
4334 | * is only 2 board types here we need to worry about. Don;t use the | |
4335 | * standard board init routine here, it programs up the shared | |
4336 | * memory address, and we don't know it yet... | |
4337 | */ | |
4338 | if (brdp->brdtype == BRD_ECPE) { | |
4339 | outb(0x1, (brdp->iobase + ECP_EIBRDENAB)); | |
4340 | outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); | |
4341 | udelay(10); | |
4342 | outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); | |
4343 | udelay(500); | |
4344 | stli_ecpeienable(brdp); | |
4345 | } else if (brdp->brdtype == BRD_ONBOARDE) { | |
4346 | outb(0x1, (brdp->iobase + ONB_EIBRDENAB)); | |
4347 | outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); | |
4348 | udelay(10); | |
4349 | outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); | |
4350 | mdelay(100); | |
4351 | outb(0x1, brdp->iobase); | |
4352 | mdelay(1); | |
4353 | stli_onbeenable(brdp); | |
4354 | } else { | |
4355 | return(-ENODEV); | |
4356 | } | |
4357 | ||
4358 | foundit = 0; | |
4359 | brdp->memsize = ECP_MEMSIZE; | |
4360 | ||
4361 | /* | |
4362 | * Board shared memory is enabled, so now we have a poke around and | |
4363 | * see if we can find it. | |
4364 | */ | |
4365 | for (i = 0; (i < stli_eisamempsize); i++) { | |
4366 | brdp->memaddr = stli_eisamemprobeaddrs[i]; | |
4367 | brdp->membase = (void *) brdp->memaddr; | |
4368 | brdp->membase = ioremap(brdp->memaddr, brdp->memsize); | |
4369 | if (brdp->membase == (void *) NULL) | |
4370 | continue; | |
4371 | ||
4372 | if (brdp->brdtype == BRD_ECPE) { | |
4373 | ecpsigp = (cdkecpsig_t *) stli_ecpeigetmemptr(brdp, | |
4374 | CDK_SIGADDR, __LINE__); | |
4375 | memcpy(&ecpsig, ecpsigp, sizeof(cdkecpsig_t)); | |
4376 | if (ecpsig.magic == ECP_MAGIC) | |
4377 | foundit = 1; | |
4378 | } else { | |
4379 | onbsigp = (cdkonbsig_t *) stli_onbegetmemptr(brdp, | |
4380 | CDK_SIGADDR, __LINE__); | |
4381 | memcpy(&onbsig, onbsigp, sizeof(cdkonbsig_t)); | |
4382 | if ((onbsig.magic0 == ONB_MAGIC0) && | |
4383 | (onbsig.magic1 == ONB_MAGIC1) && | |
4384 | (onbsig.magic2 == ONB_MAGIC2) && | |
4385 | (onbsig.magic3 == ONB_MAGIC3)) | |
4386 | foundit = 1; | |
4387 | } | |
4388 | ||
4389 | iounmap(brdp->membase); | |
4390 | if (foundit) | |
4391 | break; | |
4392 | } | |
4393 | ||
4394 | /* | |
4395 | * Regardless of whether we found the shared memory or not we must | |
4396 | * disable the region. After that return success or failure. | |
4397 | */ | |
4398 | if (brdp->brdtype == BRD_ECPE) | |
4399 | stli_ecpeidisable(brdp); | |
4400 | else | |
4401 | stli_onbedisable(brdp); | |
4402 | ||
4403 | if (! foundit) { | |
4404 | brdp->memaddr = 0; | |
4405 | brdp->membase = NULL; | |
4406 | printk(KERN_ERR "STALLION: failed to probe shared memory " | |
4407 | "region for %s in EISA slot=%d\n", | |
4408 | stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); | |
4409 | return(-ENODEV); | |
4410 | } | |
4411 | return(0); | |
4412 | } | |
4413 | ||
4414 | static int stli_getbrdnr(void) | |
4415 | { | |
4416 | int i; | |
4417 | ||
4418 | for (i = 0; i < STL_MAXBRDS; i++) { | |
4419 | if (!stli_brds[i]) { | |
4420 | if (i >= stli_nrbrds) | |
4421 | stli_nrbrds = i + 1; | |
4422 | return i; | |
4423 | } | |
4424 | } | |
4425 | return -1; | |
4426 | } | |
4427 | ||
4428 | /*****************************************************************************/ | |
4429 | ||
4430 | /* | |
4431 | * Probe around and try to find any EISA boards in system. The biggest | |
4432 | * problem here is finding out what memory address is associated with | |
4433 | * an EISA board after it is found. The registers of the ECPE and | |
4434 | * ONboardE are not readable - so we can't read them from there. We | |
4435 | * don't have access to the EISA CMOS (or EISA BIOS) so we don't | |
4436 | * actually have any way to find out the real value. The best we can | |
4437 | * do is go probing around in the usual places hoping we can find it. | |
4438 | */ | |
4439 | ||
4440 | static int stli_findeisabrds(void) | |
4441 | { | |
4442 | stlibrd_t *brdp; | |
4443 | unsigned int iobase, eid; | |
4444 | int i; | |
4445 | ||
4446 | #ifdef DEBUG | |
4447 | printk(KERN_DEBUG "stli_findeisabrds()\n"); | |
4448 | #endif | |
4449 | ||
4450 | /* | |
4451 | * Firstly check if this is an EISA system. Do this by probing for | |
4452 | * the system board EISA ID. If this is not an EISA system then | |
4453 | * don't bother going any further! | |
4454 | */ | |
4455 | outb(0xff, 0xc80); | |
4456 | if (inb(0xc80) == 0xff) | |
4457 | return(0); | |
4458 | ||
4459 | /* | |
4460 | * Looks like an EISA system, so go searching for EISA boards. | |
4461 | */ | |
4462 | for (iobase = 0x1000; (iobase <= 0xc000); iobase += 0x1000) { | |
4463 | outb(0xff, (iobase + 0xc80)); | |
4464 | eid = inb(iobase + 0xc80); | |
4465 | eid |= inb(iobase + 0xc81) << 8; | |
4466 | if (eid != STL_EISAID) | |
4467 | continue; | |
4468 | ||
4469 | /* | |
4470 | * We have found a board. Need to check if this board was | |
4471 | * statically configured already (just in case!). | |
4472 | */ | |
4473 | for (i = 0; (i < STL_MAXBRDS); i++) { | |
4474 | brdp = stli_brds[i]; | |
4475 | if (brdp == (stlibrd_t *) NULL) | |
4476 | continue; | |
4477 | if (brdp->iobase == iobase) | |
4478 | break; | |
4479 | } | |
4480 | if (i < STL_MAXBRDS) | |
4481 | continue; | |
4482 | ||
4483 | /* | |
4484 | * We have found a Stallion board and it is not configured already. | |
4485 | * Allocate a board structure and initialize it. | |
4486 | */ | |
4487 | if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL) | |
4488 | return(-ENOMEM); | |
4489 | if ((brdp->brdnr = stli_getbrdnr()) < 0) | |
4490 | return(-ENOMEM); | |
4491 | eid = inb(iobase + 0xc82); | |
4492 | if (eid == ECP_EISAID) | |
4493 | brdp->brdtype = BRD_ECPE; | |
4494 | else if (eid == ONB_EISAID) | |
4495 | brdp->brdtype = BRD_ONBOARDE; | |
4496 | else | |
4497 | brdp->brdtype = BRD_UNKNOWN; | |
4498 | brdp->iobase = iobase; | |
4499 | outb(0x1, (iobase + 0xc84)); | |
4500 | if (stli_eisamemprobe(brdp)) | |
4501 | outb(0, (iobase + 0xc84)); | |
4502 | stli_brdinit(brdp); | |
4503 | } | |
4504 | ||
4505 | return(0); | |
4506 | } | |
4507 | ||
4508 | /*****************************************************************************/ | |
4509 | ||
4510 | /* | |
4511 | * Find the next available board number that is free. | |
4512 | */ | |
4513 | ||
4514 | /*****************************************************************************/ | |
4515 | ||
4516 | #ifdef CONFIG_PCI | |
4517 | ||
4518 | /* | |
4519 | * We have a Stallion board. Allocate a board structure and | |
4520 | * initialize it. Read its IO and MEMORY resources from PCI | |
4521 | * configuration space. | |
4522 | */ | |
4523 | ||
4524 | static int stli_initpcibrd(int brdtype, struct pci_dev *devp) | |
4525 | { | |
4526 | stlibrd_t *brdp; | |
4527 | ||
4528 | #ifdef DEBUG | |
4529 | printk(KERN_DEBUG "stli_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n", | |
4530 | brdtype, dev->bus->number, dev->devfn); | |
4531 | #endif | |
4532 | ||
4533 | if (pci_enable_device(devp)) | |
4534 | return(-EIO); | |
4535 | if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL) | |
4536 | return(-ENOMEM); | |
4537 | if ((brdp->brdnr = stli_getbrdnr()) < 0) { | |
4538 | printk(KERN_INFO "STALLION: too many boards found, " | |
4539 | "maximum supported %d\n", STL_MAXBRDS); | |
4540 | return(0); | |
4541 | } | |
4542 | brdp->brdtype = brdtype; | |
4543 | ||
4544 | #ifdef DEBUG | |
4545 | printk(KERN_DEBUG "%s(%d): BAR[]=%lx,%lx,%lx,%lx\n", __FILE__, __LINE__, | |
4546 | pci_resource_start(devp, 0), | |
4547 | pci_resource_start(devp, 1), | |
4548 | pci_resource_start(devp, 2), | |
4549 | pci_resource_start(devp, 3)); | |
4550 | #endif | |
4551 | ||
4552 | /* | |
4553 | * We have all resources from the board, so lets setup the actual | |
4554 | * board structure now. | |
4555 | */ | |
4556 | brdp->iobase = pci_resource_start(devp, 3); | |
4557 | brdp->memaddr = pci_resource_start(devp, 2); | |
4558 | stli_brdinit(brdp); | |
4559 | ||
4560 | return(0); | |
4561 | } | |
4562 | ||
4563 | /*****************************************************************************/ | |
4564 | ||
4565 | /* | |
4566 | * Find all Stallion PCI boards that might be installed. Initialize each | |
4567 | * one as it is found. | |
4568 | */ | |
4569 | ||
4570 | static int stli_findpcibrds(void) | |
4571 | { | |
4572 | struct pci_dev *dev = NULL; | |
4573 | int rc; | |
4574 | ||
4575 | #ifdef DEBUG | |
4576 | printk("stli_findpcibrds()\n"); | |
4577 | #endif | |
4578 | ||
4579 | while ((dev = pci_find_device(PCI_VENDOR_ID_STALLION, | |
4580 | PCI_DEVICE_ID_ECRA, dev))) { | |
4581 | if ((rc = stli_initpcibrd(BRD_ECPPCI, dev))) | |
4582 | return(rc); | |
4583 | } | |
4584 | ||
4585 | return(0); | |
4586 | } | |
4587 | ||
4588 | #endif | |
4589 | ||
4590 | /*****************************************************************************/ | |
4591 | ||
4592 | /* | |
4593 | * Allocate a new board structure. Fill out the basic info in it. | |
4594 | */ | |
4595 | ||
4596 | static stlibrd_t *stli_allocbrd(void) | |
4597 | { | |
4598 | stlibrd_t *brdp; | |
4599 | ||
b0b4ed72 TK |
4600 | brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL); |
4601 | if (!brdp) { | |
1da177e4 LT |
4602 | printk(KERN_ERR "STALLION: failed to allocate memory " |
4603 | "(size=%d)\n", sizeof(stlibrd_t)); | |
b0b4ed72 | 4604 | return NULL; |
1da177e4 LT |
4605 | } |
4606 | ||
1da177e4 LT |
4607 | brdp->magic = STLI_BOARDMAGIC; |
4608 | return(brdp); | |
4609 | } | |
4610 | ||
4611 | /*****************************************************************************/ | |
4612 | ||
4613 | /* | |
4614 | * Scan through all the boards in the configuration and see what we | |
4615 | * can find. | |
4616 | */ | |
4617 | ||
4618 | static int stli_initbrds(void) | |
4619 | { | |
4620 | stlibrd_t *brdp, *nxtbrdp; | |
4621 | stlconf_t *confp; | |
4622 | int i, j; | |
4623 | ||
4624 | #ifdef DEBUG | |
4625 | printk(KERN_DEBUG "stli_initbrds()\n"); | |
4626 | #endif | |
4627 | ||
4628 | if (stli_nrbrds > STL_MAXBRDS) { | |
4629 | printk(KERN_INFO "STALLION: too many boards in configuration " | |
4630 | "table, truncating to %d\n", STL_MAXBRDS); | |
4631 | stli_nrbrds = STL_MAXBRDS; | |
4632 | } | |
4633 | ||
4634 | /* | |
4635 | * Firstly scan the list of static boards configured. Allocate | |
4636 | * resources and initialize the boards as found. If this is a | |
4637 | * module then let the module args override static configuration. | |
4638 | */ | |
4639 | for (i = 0; (i < stli_nrbrds); i++) { | |
4640 | confp = &stli_brdconf[i]; | |
4641 | #ifdef MODULE | |
4642 | stli_parsebrd(confp, stli_brdsp[i]); | |
4643 | #endif | |
4644 | if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL) | |
4645 | return(-ENOMEM); | |
4646 | brdp->brdnr = i; | |
4647 | brdp->brdtype = confp->brdtype; | |
4648 | brdp->iobase = confp->ioaddr1; | |
4649 | brdp->memaddr = confp->memaddr; | |
4650 | stli_brdinit(brdp); | |
4651 | } | |
4652 | ||
4653 | /* | |
4654 | * Static configuration table done, so now use dynamic methods to | |
4655 | * see if any more boards should be configured. | |
4656 | */ | |
4657 | #ifdef MODULE | |
4658 | stli_argbrds(); | |
4659 | #endif | |
dbc6b5f5 | 4660 | if (STLI_EISAPROBE) |
1da177e4 LT |
4661 | stli_findeisabrds(); |
4662 | #ifdef CONFIG_PCI | |
4663 | stli_findpcibrds(); | |
4664 | #endif | |
4665 | ||
4666 | /* | |
4667 | * All found boards are initialized. Now for a little optimization, if | |
4668 | * no boards are sharing the "shared memory" regions then we can just | |
4669 | * leave them all enabled. This is in fact the usual case. | |
4670 | */ | |
4671 | stli_shared = 0; | |
4672 | if (stli_nrbrds > 1) { | |
4673 | for (i = 0; (i < stli_nrbrds); i++) { | |
4674 | brdp = stli_brds[i]; | |
4675 | if (brdp == (stlibrd_t *) NULL) | |
4676 | continue; | |
4677 | for (j = i + 1; (j < stli_nrbrds); j++) { | |
4678 | nxtbrdp = stli_brds[j]; | |
4679 | if (nxtbrdp == (stlibrd_t *) NULL) | |
4680 | continue; | |
4681 | if ((brdp->membase >= nxtbrdp->membase) && | |
4682 | (brdp->membase <= (nxtbrdp->membase + | |
4683 | nxtbrdp->memsize - 1))) { | |
4684 | stli_shared++; | |
4685 | break; | |
4686 | } | |
4687 | } | |
4688 | } | |
4689 | } | |
4690 | ||
4691 | if (stli_shared == 0) { | |
4692 | for (i = 0; (i < stli_nrbrds); i++) { | |
4693 | brdp = stli_brds[i]; | |
4694 | if (brdp == (stlibrd_t *) NULL) | |
4695 | continue; | |
4696 | if (brdp->state & BST_FOUND) { | |
4697 | EBRDENABLE(brdp); | |
4698 | brdp->enable = NULL; | |
4699 | brdp->disable = NULL; | |
4700 | } | |
4701 | } | |
4702 | } | |
4703 | ||
4704 | return(0); | |
4705 | } | |
4706 | ||
4707 | /*****************************************************************************/ | |
4708 | ||
4709 | /* | |
4710 | * Code to handle an "staliomem" read operation. This device is the | |
4711 | * contents of the board shared memory. It is used for down loading | |
4712 | * the slave image (and debugging :-) | |
4713 | */ | |
4714 | ||
4715 | static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp) | |
4716 | { | |
4717 | unsigned long flags; | |
4718 | void *memptr; | |
4719 | stlibrd_t *brdp; | |
4720 | int brdnr, size, n; | |
4721 | ||
4722 | #ifdef DEBUG | |
4723 | printk(KERN_DEBUG "stli_memread(fp=%x,buf=%x,count=%x,offp=%x)\n", | |
4724 | (int) fp, (int) buf, count, (int) offp); | |
4725 | #endif | |
4726 | ||
4727 | brdnr = iminor(fp->f_dentry->d_inode); | |
4728 | if (brdnr >= stli_nrbrds) | |
4729 | return(-ENODEV); | |
4730 | brdp = stli_brds[brdnr]; | |
4731 | if (brdp == (stlibrd_t *) NULL) | |
4732 | return(-ENODEV); | |
4733 | if (brdp->state == 0) | |
4734 | return(-ENODEV); | |
4735 | if (fp->f_pos >= brdp->memsize) | |
4736 | return(0); | |
4737 | ||
4738 | size = MIN(count, (brdp->memsize - fp->f_pos)); | |
4739 | ||
4740 | save_flags(flags); | |
4741 | cli(); | |
4742 | EBRDENABLE(brdp); | |
4743 | while (size > 0) { | |
4744 | memptr = (void *) EBRDGETMEMPTR(brdp, fp->f_pos); | |
4745 | n = MIN(size, (brdp->pagesize - (((unsigned long) fp->f_pos) % brdp->pagesize))); | |
4746 | if (copy_to_user(buf, memptr, n)) { | |
4747 | count = -EFAULT; | |
4748 | goto out; | |
4749 | } | |
4750 | fp->f_pos += n; | |
4751 | buf += n; | |
4752 | size -= n; | |
4753 | } | |
4754 | out: | |
4755 | EBRDDISABLE(brdp); | |
4756 | restore_flags(flags); | |
4757 | ||
4758 | return(count); | |
4759 | } | |
4760 | ||
4761 | /*****************************************************************************/ | |
4762 | ||
4763 | /* | |
4764 | * Code to handle an "staliomem" write operation. This device is the | |
4765 | * contents of the board shared memory. It is used for down loading | |
4766 | * the slave image (and debugging :-) | |
4767 | */ | |
4768 | ||
4769 | static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp) | |
4770 | { | |
4771 | unsigned long flags; | |
4772 | void *memptr; | |
4773 | stlibrd_t *brdp; | |
4774 | char __user *chbuf; | |
4775 | int brdnr, size, n; | |
4776 | ||
4777 | #ifdef DEBUG | |
4778 | printk(KERN_DEBUG "stli_memwrite(fp=%x,buf=%x,count=%x,offp=%x)\n", | |
4779 | (int) fp, (int) buf, count, (int) offp); | |
4780 | #endif | |
4781 | ||
4782 | brdnr = iminor(fp->f_dentry->d_inode); | |
4783 | if (brdnr >= stli_nrbrds) | |
4784 | return(-ENODEV); | |
4785 | brdp = stli_brds[brdnr]; | |
4786 | if (brdp == (stlibrd_t *) NULL) | |
4787 | return(-ENODEV); | |
4788 | if (brdp->state == 0) | |
4789 | return(-ENODEV); | |
4790 | if (fp->f_pos >= brdp->memsize) | |
4791 | return(0); | |
4792 | ||
4793 | chbuf = (char __user *) buf; | |
4794 | size = MIN(count, (brdp->memsize - fp->f_pos)); | |
4795 | ||
4796 | save_flags(flags); | |
4797 | cli(); | |
4798 | EBRDENABLE(brdp); | |
4799 | while (size > 0) { | |
4800 | memptr = (void *) EBRDGETMEMPTR(brdp, fp->f_pos); | |
4801 | n = MIN(size, (brdp->pagesize - (((unsigned long) fp->f_pos) % brdp->pagesize))); | |
4802 | if (copy_from_user(memptr, chbuf, n)) { | |
4803 | count = -EFAULT; | |
4804 | goto out; | |
4805 | } | |
4806 | fp->f_pos += n; | |
4807 | chbuf += n; | |
4808 | size -= n; | |
4809 | } | |
4810 | out: | |
4811 | EBRDDISABLE(brdp); | |
4812 | restore_flags(flags); | |
4813 | ||
4814 | return(count); | |
4815 | } | |
4816 | ||
4817 | /*****************************************************************************/ | |
4818 | ||
4819 | /* | |
4820 | * Return the board stats structure to user app. | |
4821 | */ | |
4822 | ||
4823 | static int stli_getbrdstats(combrd_t __user *bp) | |
4824 | { | |
4825 | stlibrd_t *brdp; | |
4826 | int i; | |
4827 | ||
4828 | if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t))) | |
4829 | return -EFAULT; | |
4830 | if (stli_brdstats.brd >= STL_MAXBRDS) | |
4831 | return(-ENODEV); | |
4832 | brdp = stli_brds[stli_brdstats.brd]; | |
4833 | if (brdp == (stlibrd_t *) NULL) | |
4834 | return(-ENODEV); | |
4835 | ||
4836 | memset(&stli_brdstats, 0, sizeof(combrd_t)); | |
4837 | stli_brdstats.brd = brdp->brdnr; | |
4838 | stli_brdstats.type = brdp->brdtype; | |
4839 | stli_brdstats.hwid = 0; | |
4840 | stli_brdstats.state = brdp->state; | |
4841 | stli_brdstats.ioaddr = brdp->iobase; | |
4842 | stli_brdstats.memaddr = brdp->memaddr; | |
4843 | stli_brdstats.nrpanels = brdp->nrpanels; | |
4844 | stli_brdstats.nrports = brdp->nrports; | |
4845 | for (i = 0; (i < brdp->nrpanels); i++) { | |
4846 | stli_brdstats.panels[i].panel = i; | |
4847 | stli_brdstats.panels[i].hwid = brdp->panelids[i]; | |
4848 | stli_brdstats.panels[i].nrports = brdp->panels[i]; | |
4849 | } | |
4850 | ||
4851 | if (copy_to_user(bp, &stli_brdstats, sizeof(combrd_t))) | |
4852 | return -EFAULT; | |
4853 | return(0); | |
4854 | } | |
4855 | ||
4856 | /*****************************************************************************/ | |
4857 | ||
4858 | /* | |
4859 | * Resolve the referenced port number into a port struct pointer. | |
4860 | */ | |
4861 | ||
4862 | static stliport_t *stli_getport(int brdnr, int panelnr, int portnr) | |
4863 | { | |
4864 | stlibrd_t *brdp; | |
4865 | int i; | |
4866 | ||
4867 | if ((brdnr < 0) || (brdnr >= STL_MAXBRDS)) | |
4868 | return((stliport_t *) NULL); | |
4869 | brdp = stli_brds[brdnr]; | |
4870 | if (brdp == (stlibrd_t *) NULL) | |
4871 | return((stliport_t *) NULL); | |
4872 | for (i = 0; (i < panelnr); i++) | |
4873 | portnr += brdp->panels[i]; | |
4874 | if ((portnr < 0) || (portnr >= brdp->nrports)) | |
4875 | return((stliport_t *) NULL); | |
4876 | return(brdp->ports[portnr]); | |
4877 | } | |
4878 | ||
4879 | /*****************************************************************************/ | |
4880 | ||
4881 | /* | |
4882 | * Return the port stats structure to user app. A NULL port struct | |
4883 | * pointer passed in means that we need to find out from the app | |
4884 | * what port to get stats for (used through board control device). | |
4885 | */ | |
4886 | ||
4887 | static int stli_portcmdstats(stliport_t *portp) | |
4888 | { | |
4889 | unsigned long flags; | |
4890 | stlibrd_t *brdp; | |
4891 | int rc; | |
4892 | ||
4893 | memset(&stli_comstats, 0, sizeof(comstats_t)); | |
4894 | ||
4895 | if (portp == (stliport_t *) NULL) | |
4896 | return(-ENODEV); | |
4897 | brdp = stli_brds[portp->brdnr]; | |
4898 | if (brdp == (stlibrd_t *) NULL) | |
4899 | return(-ENODEV); | |
4900 | ||
4901 | if (brdp->state & BST_STARTED) { | |
4902 | if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, | |
4903 | &stli_cdkstats, sizeof(asystats_t), 1)) < 0) | |
4904 | return(rc); | |
4905 | } else { | |
4906 | memset(&stli_cdkstats, 0, sizeof(asystats_t)); | |
4907 | } | |
4908 | ||
4909 | stli_comstats.brd = portp->brdnr; | |
4910 | stli_comstats.panel = portp->panelnr; | |
4911 | stli_comstats.port = portp->portnr; | |
4912 | stli_comstats.state = portp->state; | |
4913 | stli_comstats.flags = portp->flags; | |
4914 | ||
4915 | save_flags(flags); | |
4916 | cli(); | |
4917 | if (portp->tty != (struct tty_struct *) NULL) { | |
4918 | if (portp->tty->driver_data == portp) { | |
4919 | stli_comstats.ttystate = portp->tty->flags; | |
33f0f88f | 4920 | stli_comstats.rxbuffered = -1 /*portp->tty->flip.count*/; |
1da177e4 LT |
4921 | if (portp->tty->termios != (struct termios *) NULL) { |
4922 | stli_comstats.cflags = portp->tty->termios->c_cflag; | |
4923 | stli_comstats.iflags = portp->tty->termios->c_iflag; | |
4924 | stli_comstats.oflags = portp->tty->termios->c_oflag; | |
4925 | stli_comstats.lflags = portp->tty->termios->c_lflag; | |
4926 | } | |
4927 | } | |
4928 | } | |
4929 | restore_flags(flags); | |
4930 | ||
4931 | stli_comstats.txtotal = stli_cdkstats.txchars; | |
4932 | stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover; | |
4933 | stli_comstats.txbuffered = stli_cdkstats.txringq; | |
4934 | stli_comstats.rxbuffered += stli_cdkstats.rxringq; | |
4935 | stli_comstats.rxoverrun = stli_cdkstats.overruns; | |
4936 | stli_comstats.rxparity = stli_cdkstats.parity; | |
4937 | stli_comstats.rxframing = stli_cdkstats.framing; | |
4938 | stli_comstats.rxlost = stli_cdkstats.ringover; | |
4939 | stli_comstats.rxbreaks = stli_cdkstats.rxbreaks; | |
4940 | stli_comstats.txbreaks = stli_cdkstats.txbreaks; | |
4941 | stli_comstats.txxon = stli_cdkstats.txstart; | |
4942 | stli_comstats.txxoff = stli_cdkstats.txstop; | |
4943 | stli_comstats.rxxon = stli_cdkstats.rxstart; | |
4944 | stli_comstats.rxxoff = stli_cdkstats.rxstop; | |
4945 | stli_comstats.rxrtsoff = stli_cdkstats.rtscnt / 2; | |
4946 | stli_comstats.rxrtson = stli_cdkstats.rtscnt - stli_comstats.rxrtsoff; | |
4947 | stli_comstats.modem = stli_cdkstats.dcdcnt; | |
4948 | stli_comstats.hwid = stli_cdkstats.hwid; | |
4949 | stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals); | |
4950 | ||
4951 | return(0); | |
4952 | } | |
4953 | ||
4954 | /*****************************************************************************/ | |
4955 | ||
4956 | /* | |
4957 | * Return the port stats structure to user app. A NULL port struct | |
4958 | * pointer passed in means that we need to find out from the app | |
4959 | * what port to get stats for (used through board control device). | |
4960 | */ | |
4961 | ||
4962 | static int stli_getportstats(stliport_t *portp, comstats_t __user *cp) | |
4963 | { | |
4964 | stlibrd_t *brdp; | |
4965 | int rc; | |
4966 | ||
4967 | if (!portp) { | |
4968 | if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t))) | |
4969 | return -EFAULT; | |
4970 | portp = stli_getport(stli_comstats.brd, stli_comstats.panel, | |
4971 | stli_comstats.port); | |
4972 | if (!portp) | |
4973 | return -ENODEV; | |
4974 | } | |
4975 | ||
4976 | brdp = stli_brds[portp->brdnr]; | |
4977 | if (!brdp) | |
4978 | return -ENODEV; | |
4979 | ||
4980 | if ((rc = stli_portcmdstats(portp)) < 0) | |
4981 | return rc; | |
4982 | ||
4983 | return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ? | |
4984 | -EFAULT : 0; | |
4985 | } | |
4986 | ||
4987 | /*****************************************************************************/ | |
4988 | ||
4989 | /* | |
4990 | * Clear the port stats structure. We also return it zeroed out... | |
4991 | */ | |
4992 | ||
4993 | static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp) | |
4994 | { | |
4995 | stlibrd_t *brdp; | |
4996 | int rc; | |
4997 | ||
4998 | if (!portp) { | |
4999 | if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t))) | |
5000 | return -EFAULT; | |
5001 | portp = stli_getport(stli_comstats.brd, stli_comstats.panel, | |
5002 | stli_comstats.port); | |
5003 | if (!portp) | |
5004 | return -ENODEV; | |
5005 | } | |
5006 | ||
5007 | brdp = stli_brds[portp->brdnr]; | |
5008 | if (!brdp) | |
5009 | return -ENODEV; | |
5010 | ||
5011 | if (brdp->state & BST_STARTED) { | |
5012 | if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) | |
5013 | return rc; | |
5014 | } | |
5015 | ||
5016 | memset(&stli_comstats, 0, sizeof(comstats_t)); | |
5017 | stli_comstats.brd = portp->brdnr; | |
5018 | stli_comstats.panel = portp->panelnr; | |
5019 | stli_comstats.port = portp->portnr; | |
5020 | ||
5021 | if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t))) | |
5022 | return -EFAULT; | |
5023 | return 0; | |
5024 | } | |
5025 | ||
5026 | /*****************************************************************************/ | |
5027 | ||
5028 | /* | |
5029 | * Return the entire driver ports structure to a user app. | |
5030 | */ | |
5031 | ||
5032 | static int stli_getportstruct(stliport_t __user *arg) | |
5033 | { | |
5034 | stliport_t *portp; | |
5035 | ||
5036 | if (copy_from_user(&stli_dummyport, arg, sizeof(stliport_t))) | |
5037 | return -EFAULT; | |
5038 | portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr, | |
5039 | stli_dummyport.portnr); | |
5040 | if (!portp) | |
5041 | return -ENODEV; | |
5042 | if (copy_to_user(arg, portp, sizeof(stliport_t))) | |
5043 | return -EFAULT; | |
5044 | return 0; | |
5045 | } | |
5046 | ||
5047 | /*****************************************************************************/ | |
5048 | ||
5049 | /* | |
5050 | * Return the entire driver board structure to a user app. | |
5051 | */ | |
5052 | ||
5053 | static int stli_getbrdstruct(stlibrd_t __user *arg) | |
5054 | { | |
5055 | stlibrd_t *brdp; | |
5056 | ||
5057 | if (copy_from_user(&stli_dummybrd, arg, sizeof(stlibrd_t))) | |
5058 | return -EFAULT; | |
5059 | if ((stli_dummybrd.brdnr < 0) || (stli_dummybrd.brdnr >= STL_MAXBRDS)) | |
5060 | return -ENODEV; | |
5061 | brdp = stli_brds[stli_dummybrd.brdnr]; | |
5062 | if (!brdp) | |
5063 | return -ENODEV; | |
5064 | if (copy_to_user(arg, brdp, sizeof(stlibrd_t))) | |
5065 | return -EFAULT; | |
5066 | return 0; | |
5067 | } | |
5068 | ||
5069 | /*****************************************************************************/ | |
5070 | ||
5071 | /* | |
5072 | * The "staliomem" device is also required to do some special operations on | |
5073 | * the board. We need to be able to send an interrupt to the board, | |
5074 | * reset it, and start/stop it. | |
5075 | */ | |
5076 | ||
5077 | static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) | |
5078 | { | |
5079 | stlibrd_t *brdp; | |
5080 | int brdnr, rc, done; | |
5081 | void __user *argp = (void __user *)arg; | |
5082 | ||
5083 | #ifdef DEBUG | |
5084 | printk(KERN_DEBUG "stli_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n", | |
5085 | (int) ip, (int) fp, cmd, (int) arg); | |
5086 | #endif | |
5087 | ||
5088 | /* | |
5089 | * First up handle the board independent ioctls. | |
5090 | */ | |
5091 | done = 0; | |
5092 | rc = 0; | |
5093 | ||
5094 | switch (cmd) { | |
5095 | case COM_GETPORTSTATS: | |
5096 | rc = stli_getportstats(NULL, argp); | |
5097 | done++; | |
5098 | break; | |
5099 | case COM_CLRPORTSTATS: | |
5100 | rc = stli_clrportstats(NULL, argp); | |
5101 | done++; | |
5102 | break; | |
5103 | case COM_GETBRDSTATS: | |
5104 | rc = stli_getbrdstats(argp); | |
5105 | done++; | |
5106 | break; | |
5107 | case COM_READPORT: | |
5108 | rc = stli_getportstruct(argp); | |
5109 | done++; | |
5110 | break; | |
5111 | case COM_READBOARD: | |
5112 | rc = stli_getbrdstruct(argp); | |
5113 | done++; | |
5114 | break; | |
5115 | } | |
5116 | ||
5117 | if (done) | |
5118 | return(rc); | |
5119 | ||
5120 | /* | |
5121 | * Now handle the board specific ioctls. These all depend on the | |
5122 | * minor number of the device they were called from. | |
5123 | */ | |
5124 | brdnr = iminor(ip); | |
5125 | if (brdnr >= STL_MAXBRDS) | |
5126 | return(-ENODEV); | |
5127 | brdp = stli_brds[brdnr]; | |
5128 | if (!brdp) | |
5129 | return(-ENODEV); | |
5130 | if (brdp->state == 0) | |
5131 | return(-ENODEV); | |
5132 | ||
5133 | switch (cmd) { | |
5134 | case STL_BINTR: | |
5135 | EBRDINTR(brdp); | |
5136 | break; | |
5137 | case STL_BSTART: | |
5138 | rc = stli_startbrd(brdp); | |
5139 | break; | |
5140 | case STL_BSTOP: | |
5141 | brdp->state &= ~BST_STARTED; | |
5142 | break; | |
5143 | case STL_BRESET: | |
5144 | brdp->state &= ~BST_STARTED; | |
5145 | EBRDRESET(brdp); | |
5146 | if (stli_shared == 0) { | |
5147 | if (brdp->reenable != NULL) | |
5148 | (* brdp->reenable)(brdp); | |
5149 | } | |
5150 | break; | |
5151 | default: | |
5152 | rc = -ENOIOCTLCMD; | |
5153 | break; | |
5154 | } | |
5155 | ||
5156 | return(rc); | |
5157 | } | |
5158 | ||
5159 | static struct tty_operations stli_ops = { | |
5160 | .open = stli_open, | |
5161 | .close = stli_close, | |
5162 | .write = stli_write, | |
5163 | .put_char = stli_putchar, | |
5164 | .flush_chars = stli_flushchars, | |
5165 | .write_room = stli_writeroom, | |
5166 | .chars_in_buffer = stli_charsinbuffer, | |
5167 | .ioctl = stli_ioctl, | |
5168 | .set_termios = stli_settermios, | |
5169 | .throttle = stli_throttle, | |
5170 | .unthrottle = stli_unthrottle, | |
5171 | .stop = stli_stop, | |
5172 | .start = stli_start, | |
5173 | .hangup = stli_hangup, | |
5174 | .flush_buffer = stli_flushbuffer, | |
5175 | .break_ctl = stli_breakctl, | |
5176 | .wait_until_sent = stli_waituntilsent, | |
5177 | .send_xchar = stli_sendxchar, | |
5178 | .read_proc = stli_readproc, | |
5179 | .tiocmget = stli_tiocmget, | |
5180 | .tiocmset = stli_tiocmset, | |
5181 | }; | |
5182 | ||
5183 | /*****************************************************************************/ | |
5184 | ||
5185 | int __init stli_init(void) | |
5186 | { | |
5187 | int i; | |
5188 | printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion); | |
5189 | ||
5190 | stli_initbrds(); | |
5191 | ||
5192 | stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); | |
5193 | if (!stli_serial) | |
5194 | return -ENOMEM; | |
5195 | ||
5196 | /* | |
5197 | * Allocate a temporary write buffer. | |
5198 | */ | |
b0b4ed72 TK |
5199 | stli_tmpwritebuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); |
5200 | if (!stli_tmpwritebuf) | |
1da177e4 LT |
5201 | printk(KERN_ERR "STALLION: failed to allocate memory " |
5202 | "(size=%d)\n", STLI_TXBUFSIZE); | |
b0b4ed72 TK |
5203 | stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); |
5204 | if (!stli_txcookbuf) | |
1da177e4 LT |
5205 | printk(KERN_ERR "STALLION: failed to allocate memory " |
5206 | "(size=%d)\n", STLI_TXBUFSIZE); | |
5207 | ||
5208 | /* | |
5209 | * Set up a character driver for the shared memory region. We need this | |
5210 | * to down load the slave code image. Also it is a useful debugging tool. | |
5211 | */ | |
5212 | if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem)) | |
5213 | printk(KERN_ERR "STALLION: failed to register serial memory " | |
5214 | "device\n"); | |
5215 | ||
5216 | devfs_mk_dir("staliomem"); | |
ca8eca68 | 5217 | istallion_class = class_create(THIS_MODULE, "staliomem"); |
1da177e4 LT |
5218 | for (i = 0; i < 4; i++) { |
5219 | devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i), | |
5220 | S_IFCHR | S_IRUSR | S_IWUSR, | |
5221 | "staliomem/%d", i); | |
53f46542 GKH |
5222 | class_device_create(istallion_class, NULL, |
5223 | MKDEV(STL_SIOMEMMAJOR, i), | |
1da177e4 LT |
5224 | NULL, "staliomem%d", i); |
5225 | } | |
5226 | ||
5227 | /* | |
5228 | * Set up the tty driver structure and register us as a driver. | |
5229 | */ | |
5230 | stli_serial->owner = THIS_MODULE; | |
5231 | stli_serial->driver_name = stli_drvname; | |
5232 | stli_serial->name = stli_serialname; | |
5233 | stli_serial->major = STL_SERIALMAJOR; | |
5234 | stli_serial->minor_start = 0; | |
5235 | stli_serial->type = TTY_DRIVER_TYPE_SERIAL; | |
5236 | stli_serial->subtype = SERIAL_TYPE_NORMAL; | |
5237 | stli_serial->init_termios = stli_deftermios; | |
5238 | stli_serial->flags = TTY_DRIVER_REAL_RAW; | |
5239 | tty_set_operations(stli_serial, &stli_ops); | |
5240 | ||
5241 | if (tty_register_driver(stli_serial)) { | |
5242 | put_tty_driver(stli_serial); | |
5243 | printk(KERN_ERR "STALLION: failed to register serial driver\n"); | |
5244 | return -EBUSY; | |
5245 | } | |
5246 | return(0); | |
5247 | } | |
5248 | ||
5249 | /*****************************************************************************/ |