Commit | Line | Data |
---|---|---|
80619de8 AP |
1 | /* |
2 | * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver | |
3 | * | |
4 | * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> | |
5 | * | |
6 | * Thanks to Afatech who kindly provided information. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | * | |
22 | */ | |
23 | ||
24 | #include "af9015.h" | |
25 | #include "af9013.h" | |
26 | #include "mt2060.h" | |
27 | #include "qt1010.h" | |
28 | #include "tda18271.h" | |
29 | #include "mxl5005s.h" | |
30 | #if 0 | |
31 | #include "mc44s80x.h" | |
32 | #endif | |
33 | ||
34 | int dvb_usb_af9015_debug; | |
35 | module_param_named(debug, dvb_usb_af9015_debug, int, 0644); | |
36 | MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); | |
37 | int dvb_usb_af9015_remote; | |
38 | module_param_named(remote, dvb_usb_af9015_remote, int, 0644); | |
39 | MODULE_PARM_DESC(remote, "select remote"); | |
40 | int dvb_usb_af9015_dual_mode; | |
41 | module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); | |
42 | MODULE_PARM_DESC(dual_mode, "enable dual mode"); | |
43 | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); | |
44 | ||
45 | static DEFINE_MUTEX(af9015_usb_mutex); | |
46 | ||
47 | static struct af9015_config af9015_config; | |
48 | static struct dvb_usb_device_properties af9015_properties[2]; | |
49 | int af9015_properties_count = ARRAY_SIZE(af9015_properties); | |
50 | ||
51 | static struct af9013_config af9015_af9013_config[] = { | |
52 | { | |
53 | .demod_address = AF9015_I2C_DEMOD, | |
54 | .output_mode = AF9013_OUTPUT_MODE_USB, | |
55 | .api_version = { 0, 1, 9, 0 }, | |
56 | .gpio[0] = AF9013_GPIO_HI, | |
80619de8 AP |
57 | .gpio[3] = AF9013_GPIO_TUNER_ON, |
58 | ||
59 | }, { | |
60 | .output_mode = AF9013_OUTPUT_MODE_SERIAL, | |
61 | .api_version = { 0, 1, 9, 0 }, | |
62 | .gpio[0] = AF9013_GPIO_TUNER_ON, | |
63 | .gpio[1] = AF9013_GPIO_LO, | |
64 | } | |
65 | }; | |
66 | ||
67 | static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) | |
68 | { | |
69 | int act_len, ret; | |
70 | u8 buf[64]; | |
71 | u8 write = 1; | |
72 | u8 msg_len = 8; | |
73 | static u8 seq; /* packet sequence number */ | |
74 | ||
75 | if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) | |
76 | return -EAGAIN; | |
77 | ||
78 | buf[0] = req->cmd; | |
79 | buf[1] = seq++; | |
80 | buf[2] = req->i2c_addr; | |
81 | buf[3] = req->addr >> 8; | |
82 | buf[4] = req->addr & 0xff; | |
83 | buf[5] = req->mbox; | |
84 | buf[6] = req->addr_len; | |
85 | buf[7] = req->data_len; | |
86 | ||
87 | switch (req->cmd) { | |
88 | case GET_CONFIG: | |
89 | case BOOT: | |
90 | case READ_MEMORY: | |
91 | case RECONNECT_USB: | |
92 | case GET_IR_CODE: | |
93 | write = 0; | |
94 | break; | |
95 | case READ_I2C: | |
96 | write = 0; | |
97 | buf[2] |= 0x01; /* set I2C direction */ | |
98 | case WRITE_I2C: | |
99 | buf[0] = READ_WRITE_I2C; | |
100 | break; | |
101 | case WRITE_MEMORY: | |
102 | if (((req->addr & 0xff00) == 0xff00) || | |
103 | ((req->addr & 0xae00) == 0xae00)) | |
104 | buf[0] = WRITE_VIRTUAL_MEMORY; | |
105 | case WRITE_VIRTUAL_MEMORY: | |
106 | case COPY_FIRMWARE: | |
107 | case DOWNLOAD_FIRMWARE: | |
108 | break; | |
109 | default: | |
110 | err("unknown command:%d", req->cmd); | |
111 | ret = -1; | |
112 | goto error_unlock; | |
113 | } | |
114 | ||
115 | /* write requested */ | |
116 | if (write) { | |
117 | memcpy(&buf[8], req->data, req->data_len); | |
118 | msg_len += req->data_len; | |
119 | } | |
120 | deb_xfer(">>> "); | |
121 | debug_dump(buf, msg_len, deb_xfer); | |
122 | ||
123 | /* send req */ | |
124 | ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, | |
125 | &act_len, AF9015_USB_TIMEOUT); | |
126 | if (ret) | |
127 | err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); | |
128 | else | |
129 | if (act_len != msg_len) | |
130 | ret = -1; /* all data is not send */ | |
131 | if (ret) | |
132 | goto error_unlock; | |
133 | ||
134 | /* no ack for those packets */ | |
135 | if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) | |
136 | goto exit_unlock; | |
137 | ||
138 | /* receive ack and data if read req */ | |
139 | msg_len = 1 + 1 + req->data_len; /* seq + status + data len */ | |
140 | ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, | |
141 | &act_len, AF9015_USB_TIMEOUT); | |
142 | if (ret) { | |
143 | err("recv bulk message failed:%d", ret); | |
144 | ret = -1; | |
145 | goto error_unlock; | |
146 | } | |
147 | ||
148 | deb_xfer("<<< "); | |
149 | debug_dump(buf, act_len, deb_xfer); | |
150 | ||
151 | /* remote controller query status is 1 if remote code is not received */ | |
152 | if (req->cmd == GET_IR_CODE && buf[1] == 1) { | |
153 | buf[1] = 0; /* clear command "error" status */ | |
154 | memset(&buf[2], 0, req->data_len); | |
155 | buf[3] = 1; /* no remote code received mark */ | |
156 | } | |
157 | ||
158 | /* check status */ | |
159 | if (buf[1]) { | |
160 | err("command failed:%d", buf[1]); | |
161 | ret = -1; | |
162 | goto error_unlock; | |
163 | } | |
164 | ||
165 | /* read request, copy returned data to return buf */ | |
166 | if (!write) | |
167 | memcpy(req->data, &buf[2], req->data_len); | |
168 | ||
169 | error_unlock: | |
170 | exit_unlock: | |
171 | mutex_unlock(&af9015_usb_mutex); | |
172 | ||
173 | return ret; | |
174 | } | |
175 | ||
176 | static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) | |
177 | { | |
178 | return af9015_rw_udev(d->udev, req); | |
179 | } | |
180 | ||
181 | static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, | |
182 | u8 len) | |
183 | { | |
184 | struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, | |
185 | val}; | |
186 | return af9015_ctrl_msg(d, &req); | |
187 | } | |
188 | ||
189 | static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) | |
190 | { | |
191 | return af9015_write_regs(d, addr, &val, 1); | |
192 | } | |
193 | ||
194 | static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) | |
195 | { | |
196 | struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, 1, val}; | |
197 | return af9015_ctrl_msg(d, &req); | |
198 | } | |
199 | ||
200 | static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, | |
201 | u8 val) | |
202 | { | |
203 | struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; | |
204 | ||
205 | if (addr == af9015_af9013_config[0].demod_address || | |
206 | addr == af9015_af9013_config[1].demod_address) | |
207 | req.addr_len = 3; | |
208 | ||
209 | return af9015_ctrl_msg(d, &req); | |
210 | } | |
211 | ||
212 | static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, | |
213 | u8 *val) | |
214 | { | |
215 | struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; | |
216 | ||
217 | if (addr == af9015_af9013_config[0].demod_address || | |
218 | addr == af9015_af9013_config[1].demod_address) | |
219 | req.addr_len = 3; | |
220 | ||
221 | return af9015_ctrl_msg(d, &req); | |
222 | } | |
223 | ||
224 | static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], | |
225 | int num) | |
226 | { | |
227 | struct dvb_usb_device *d = i2c_get_adapdata(adap); | |
228 | int ret = 0, i = 0; | |
229 | u16 addr; | |
230 | u8 mbox, addr_len; | |
231 | struct req_t req; | |
232 | ||
233 | /* TODO: implement bus lock | |
234 | ||
235 | The bus lock is needed because there is two tuners both using same I2C-address. | |
236 | Due to that the only way to select correct tuner is use demodulator I2C-gate. | |
237 | ||
238 | ................................................ | |
239 | . AF9015 includes integrated AF9013 demodulator. | |
240 | . ____________ ____________ . ____________ | |
241 | .| uC | | demod | . | tuner | | |
242 | .|------------| |------------| . |------------| | |
243 | .| AF9015 | | AF9013/5 | . | MXL5003 | | |
244 | .| |--+----I2C-------|-----/ -----|-.-----I2C-------| | | |
245 | .| | | | addr 0x38 | . | addr 0xc6 | | |
246 | .|____________| | |____________| . |____________| | |
247 | .................|.............................. | |
248 | | ____________ ____________ | |
249 | | | demod | | tuner | | |
250 | | |------------| |------------| | |
251 | | | AF9013 | | MXL5003 | | |
252 | +----I2C-------|-----/ -----|-------I2C-------| | | |
253 | | addr 0x3a | | addr 0xc6 | | |
254 | |____________| |____________| | |
255 | */ | |
256 | if (mutex_lock_interruptible(&d->i2c_mutex) < 0) | |
257 | return -EAGAIN; | |
258 | ||
259 | while (i < num) { | |
260 | if (msg[i].addr == af9015_af9013_config[0].demod_address || | |
261 | msg[i].addr == af9015_af9013_config[1].demod_address) { | |
262 | addr = msg[i].buf[0] << 8; | |
263 | addr += msg[i].buf[1]; | |
264 | mbox = msg[i].buf[2]; | |
265 | addr_len = 3; | |
266 | } else { | |
267 | addr = msg[i].buf[0]; | |
268 | addr_len = 1; | |
269 | mbox = 0; | |
270 | } | |
271 | ||
272 | if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { | |
273 | if (msg[i].addr == | |
274 | af9015_af9013_config[0].demod_address) | |
275 | req.cmd = READ_MEMORY; | |
276 | else | |
277 | req.cmd = READ_I2C; | |
278 | req.i2c_addr = msg[i].addr; | |
279 | req.addr = addr; | |
280 | req.mbox = mbox; | |
281 | req.addr_len = addr_len; | |
282 | req.data_len = msg[i+1].len; | |
283 | req.data = &msg[i+1].buf[0]; | |
284 | ret = af9015_ctrl_msg(d, &req); | |
285 | i += 2; | |
286 | } else { | |
287 | if (msg[i].addr == | |
288 | af9015_af9013_config[0].demod_address) | |
289 | req.cmd = WRITE_MEMORY; | |
290 | else | |
291 | req.cmd = WRITE_I2C; | |
292 | req.i2c_addr = msg[i].addr; | |
293 | req.addr = addr; | |
294 | req.mbox = mbox; | |
295 | req.addr_len = addr_len; | |
296 | req.data_len = msg[i].len-addr_len; | |
297 | req.data = &msg[i].buf[addr_len]; | |
298 | ret = af9015_ctrl_msg(d, &req); | |
299 | i += 1; | |
300 | } | |
301 | if (ret) | |
302 | goto error; | |
303 | ||
304 | } | |
305 | ret = i; | |
306 | ||
307 | error: | |
308 | mutex_unlock(&d->i2c_mutex); | |
309 | ||
310 | return ret; | |
311 | } | |
312 | ||
313 | static u32 af9015_i2c_func(struct i2c_adapter *adapter) | |
314 | { | |
315 | return I2C_FUNC_I2C; | |
316 | } | |
317 | ||
318 | static struct i2c_algorithm af9015_i2c_algo = { | |
319 | .master_xfer = af9015_i2c_xfer, | |
320 | .functionality = af9015_i2c_func, | |
321 | }; | |
322 | ||
323 | static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) | |
324 | { | |
325 | int ret; | |
326 | u8 val, mask = 0x01; | |
327 | ||
328 | ret = af9015_read_reg(d, addr, &val); | |
329 | if (ret) | |
330 | return ret; | |
331 | ||
332 | mask <<= bit; | |
333 | if (op) { | |
334 | /* set bit */ | |
335 | val |= mask; | |
336 | } else { | |
337 | /* clear bit */ | |
338 | mask ^= 0xff; | |
339 | val &= mask; | |
340 | } | |
341 | ||
342 | return af9015_write_reg(d, addr, val); | |
343 | } | |
344 | ||
345 | static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) | |
346 | { | |
347 | return af9015_do_reg_bit(d, addr, bit, 1); | |
348 | } | |
349 | ||
350 | static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) | |
351 | { | |
352 | return af9015_do_reg_bit(d, addr, bit, 0); | |
353 | } | |
354 | ||
355 | static int af9015_init_endpoint(struct dvb_usb_device *d) | |
356 | { | |
357 | int ret; | |
358 | u16 frame_size; | |
359 | u8 packet_size; | |
360 | deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); | |
361 | ||
362 | #define TS_PACKET_SIZE 188 | |
363 | ||
364 | #define TS_USB20_PACKET_COUNT 348 | |
365 | #define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) | |
366 | ||
367 | #define TS_USB11_PACKET_COUNT 21 | |
368 | #define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) | |
369 | ||
370 | #define TS_USB20_MAX_PACKET_SIZE 512 | |
371 | #define TS_USB11_MAX_PACKET_SIZE 64 | |
372 | ||
373 | if (d->udev->speed == USB_SPEED_FULL) { | |
374 | frame_size = TS_USB11_FRAME_SIZE/4; | |
375 | packet_size = TS_USB11_MAX_PACKET_SIZE/4; | |
376 | } else { | |
377 | frame_size = TS_USB20_FRAME_SIZE/4; | |
378 | packet_size = TS_USB20_MAX_PACKET_SIZE/4; | |
379 | } | |
380 | ||
381 | ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ | |
382 | if (ret) | |
383 | goto error; | |
384 | ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ | |
385 | if (ret) | |
386 | goto error; | |
387 | ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ | |
388 | if (ret) | |
389 | goto error; | |
390 | ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ | |
391 | if (ret) | |
392 | goto error; | |
393 | ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ | |
394 | if (ret) | |
395 | goto error; | |
396 | if (af9015_config.dual_mode) { | |
397 | ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ | |
398 | if (ret) | |
399 | goto error; | |
400 | } | |
401 | ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ | |
402 | if (ret) | |
403 | goto error; | |
404 | if (af9015_config.dual_mode) { | |
405 | ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ | |
406 | if (ret) | |
407 | goto error; | |
408 | } | |
409 | /* EP4 xfer length */ | |
410 | ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); | |
411 | if (ret) | |
412 | goto error; | |
413 | ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); | |
414 | if (ret) | |
415 | goto error; | |
416 | /* EP5 xfer length */ | |
417 | ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); | |
418 | if (ret) | |
419 | goto error; | |
420 | ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); | |
421 | if (ret) | |
422 | goto error; | |
423 | ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ | |
424 | if (ret) | |
425 | goto error; | |
426 | ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ | |
427 | if (ret) | |
428 | goto error; | |
429 | ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ | |
430 | if (ret) | |
431 | goto error; | |
432 | if (af9015_config.dual_mode) { | |
433 | ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ | |
434 | if (ret) | |
435 | goto error; | |
436 | } | |
437 | ||
438 | /* enable / disable mp2if2 */ | |
439 | if (af9015_config.dual_mode) | |
440 | ret = af9015_set_reg_bit(d, 0xd50b, 0); | |
441 | else | |
442 | ret = af9015_clear_reg_bit(d, 0xd50b, 0); | |
443 | error: | |
444 | if (ret) | |
445 | err("endpoint init failed:%d", ret); | |
446 | return ret; | |
447 | } | |
448 | ||
449 | static int af9015_copy_firmware(struct dvb_usb_device *d) | |
450 | { | |
451 | int ret; | |
452 | u8 fw_params[4]; | |
453 | u8 val, i; | |
454 | struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), | |
455 | fw_params }; | |
456 | deb_info("%s:\n", __func__); | |
457 | ||
458 | fw_params[0] = af9015_config.firmware_size >> 8; | |
459 | fw_params[1] = af9015_config.firmware_size & 0xff; | |
460 | fw_params[2] = af9015_config.firmware_checksum >> 8; | |
461 | fw_params[3] = af9015_config.firmware_checksum & 0xff; | |
462 | ||
463 | /* wait 2nd demodulator ready */ | |
464 | msleep(100); | |
465 | ||
466 | ret = af9015_read_reg_i2c(d, 0x3a, 0x98be, &val); | |
467 | if (ret) | |
468 | goto error; | |
469 | else | |
470 | deb_info("%s: firmware status:%02x\n", __func__, val); | |
471 | ||
472 | if (val == 0x0c) /* fw is running, no need for download */ | |
473 | goto exit; | |
474 | ||
475 | /* set I2C master clock to fast (to speed up firmware copy) */ | |
476 | ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ | |
477 | if (ret) | |
478 | goto error; | |
479 | ||
480 | msleep(50); | |
481 | ||
482 | /* copy firmware */ | |
483 | ret = af9015_ctrl_msg(d, &req); | |
484 | if (ret) | |
485 | err("firmware copy cmd failed:%d", ret); | |
486 | deb_info("%s: firmware copy done\n", __func__); | |
487 | ||
488 | /* set I2C master clock back to normal */ | |
489 | ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ | |
490 | if (ret) | |
491 | goto error; | |
492 | ||
493 | /* request boot firmware */ | |
494 | ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address, | |
495 | 0xe205, 1); | |
496 | deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); | |
497 | if (ret) | |
498 | goto error; | |
499 | ||
500 | for (i = 0; i < 15; i++) { | |
501 | msleep(100); | |
502 | ||
503 | /* check firmware status */ | |
504 | ret = af9015_read_reg_i2c(d, | |
505 | af9015_af9013_config[1].demod_address, 0x98be, &val); | |
506 | deb_info("%s: firmware status cmd status:%d fw status:%02x\n", | |
507 | __func__, ret, val); | |
508 | if (ret) | |
509 | goto error; | |
510 | ||
511 | if (val == 0x0c || val == 0x04) /* success or fail */ | |
512 | break; | |
513 | } | |
514 | ||
515 | if (val == 0x04) { | |
516 | err("firmware did not run"); | |
517 | ret = -1; | |
518 | } else if (val != 0x0c) { | |
519 | err("firmware boot timeout"); | |
520 | ret = -1; | |
521 | } | |
522 | ||
523 | error: | |
524 | exit: | |
525 | return ret; | |
526 | } | |
527 | ||
528 | /* dump eeprom */ | |
529 | static int af9015_eeprom_dump(struct dvb_usb_device *d) | |
530 | { | |
531 | char buf[52], buf2[4]; | |
532 | u8 reg, val; | |
533 | ||
534 | for (reg = 0; ; reg++) { | |
535 | if (reg % 16 == 0) { | |
536 | if (reg) | |
537 | deb_info("%s\n", buf); | |
538 | sprintf(buf, "%02x: ", reg); | |
539 | } | |
540 | if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0) | |
541 | sprintf(buf2, "%02x ", val); | |
542 | else | |
543 | strcpy(buf2, "-- "); | |
544 | strcat(buf, buf2); | |
545 | if (reg == 0xff) | |
546 | break; | |
547 | } | |
548 | deb_info("%s\n", buf); | |
549 | return 0; | |
550 | } | |
551 | ||
552 | int af9015_download_ir_table(struct dvb_usb_device *d) | |
553 | { | |
554 | int i, packets = 0, ret; | |
555 | u16 addr = 0x9a56; /* ir-table start address */ | |
556 | struct req_t req = {WRITE_MEMORY, 0, 0, 0, 0, 1, NULL}; | |
557 | u8 *data = NULL; | |
558 | deb_info("%s:\n", __func__); | |
559 | ||
560 | data = af9015_config.ir_table; | |
561 | packets = af9015_config.ir_table_size; | |
562 | ||
563 | /* no remote */ | |
564 | if (!packets) | |
565 | goto exit; | |
566 | ||
567 | /* load remote ir-table */ | |
568 | for (i = 0; i < packets; i++) { | |
569 | req.addr = addr + i; | |
570 | req.data = &data[i]; | |
571 | ret = af9015_ctrl_msg(d, &req); | |
572 | if (ret) { | |
573 | err("ir-table download failed at packet %d with " \ | |
574 | "code %d", i, ret); | |
575 | return ret; | |
576 | } | |
577 | } | |
578 | ||
579 | exit: | |
580 | return 0; | |
581 | } | |
582 | ||
583 | static int af9015_init(struct dvb_usb_device *d) | |
584 | { | |
585 | int ret; | |
586 | deb_info("%s:\n", __func__); | |
587 | ||
588 | ret = af9015_init_endpoint(d); | |
589 | if (ret) | |
590 | goto error; | |
591 | ||
592 | ret = af9015_download_ir_table(d); | |
593 | if (ret) | |
594 | goto error; | |
595 | ||
596 | error: | |
597 | return ret; | |
598 | } | |
599 | ||
600 | static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) | |
601 | { | |
602 | int ret; | |
603 | deb_info("%s: onoff:%d\n", __func__, onoff); | |
604 | ||
605 | if (onoff) | |
606 | ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); | |
607 | else | |
608 | ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); | |
609 | ||
610 | return ret; | |
611 | } | |
612 | ||
613 | static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, | |
614 | int onoff) | |
615 | { | |
616 | int ret; | |
617 | u8 idx; | |
618 | ||
619 | deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", | |
620 | __func__, index, pid, onoff); | |
621 | ||
622 | ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); | |
623 | if (ret) | |
624 | goto error; | |
625 | ||
626 | ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); | |
627 | if (ret) | |
628 | goto error; | |
629 | ||
630 | idx = ((index & 0x1f) | (1 << 5)); | |
631 | ret = af9015_write_reg(adap->dev, 0xd504, idx); | |
632 | ||
633 | error: | |
634 | return ret; | |
635 | } | |
636 | ||
637 | static int af9015_download_firmware(struct usb_device *udev, | |
638 | const struct firmware *fw) | |
639 | { | |
640 | int i, len, packets, remainder, ret; | |
641 | struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; | |
642 | u16 addr = 0x5100; /* firmware start address */ | |
643 | u16 checksum = 0; | |
644 | ||
645 | deb_info("%s:\n", __func__); | |
646 | ||
647 | /* calc checksum */ | |
648 | for (i = 0; i < fw->size; i++) | |
649 | checksum += fw->data[i]; | |
650 | ||
651 | af9015_config.firmware_size = fw->size; | |
652 | af9015_config.firmware_checksum = checksum; | |
653 | ||
654 | #define FW_PACKET_MAX_DATA 55 | |
655 | ||
656 | packets = fw->size / FW_PACKET_MAX_DATA; | |
657 | remainder = fw->size % FW_PACKET_MAX_DATA; | |
658 | len = FW_PACKET_MAX_DATA; | |
659 | for (i = 0; i <= packets; i++) { | |
660 | if (i == packets) /* set size of the last packet */ | |
661 | len = remainder; | |
662 | ||
663 | req.data_len = len; | |
541dfa87 | 664 | req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); |
80619de8 AP |
665 | req.addr = addr; |
666 | addr += FW_PACKET_MAX_DATA; | |
667 | ||
668 | ret = af9015_rw_udev(udev, &req); | |
669 | if (ret) { | |
670 | err("firmware download failed at packet %d with " \ | |
671 | "code %d", i, ret); | |
672 | goto error; | |
673 | } | |
674 | } | |
80619de8 AP |
675 | |
676 | /* firmware loaded, request boot */ | |
677 | req.cmd = BOOT; | |
678 | ret = af9015_rw_udev(udev, &req); | |
679 | if (ret) { | |
680 | err("firmware boot failed:%d", ret); | |
681 | goto error; | |
682 | } | |
683 | ||
684 | /* firmware is running, reconnect device in the usb bus */ | |
685 | req.cmd = RECONNECT_USB; | |
686 | ret = af9015_rw_udev(udev, &req); | |
687 | if (ret) | |
688 | err("reconnect failed: %d", ret); | |
689 | ||
690 | error: | |
691 | return ret; | |
692 | } | |
693 | ||
694 | static int af9015_read_config(struct usb_device *udev) | |
695 | { | |
696 | int ret; | |
697 | u8 val, i, offset = 0; | |
698 | struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; | |
699 | char manufacturer[10]; | |
700 | ||
701 | /* IR remote controller */ | |
702 | req.addr = AF9015_EEPROM_IR_MODE; | |
703 | ret = af9015_rw_udev(udev, &req); | |
704 | if (ret) | |
705 | goto error; | |
706 | deb_info("%s: IR mode:%d\n", __func__, val); | |
707 | for (i = 0; i < af9015_properties_count; i++) { | |
708 | if (val == AF9015_IR_MODE_DISABLED || val == 0x04) { | |
709 | af9015_properties[i].rc_key_map = NULL; | |
710 | af9015_properties[i].rc_key_map_size = 0; | |
711 | } else if (dvb_usb_af9015_remote) { | |
712 | /* load remote defined as module param */ | |
713 | switch (dvb_usb_af9015_remote) { | |
714 | case AF9015_REMOTE_A_LINK_DTU_M: | |
715 | af9015_properties[i].rc_key_map = | |
716 | af9015_rc_keys_a_link; | |
717 | af9015_properties[i].rc_key_map_size = | |
718 | ARRAY_SIZE(af9015_rc_keys_a_link); | |
719 | af9015_config.ir_table = af9015_ir_table_a_link; | |
720 | af9015_config.ir_table_size = | |
721 | ARRAY_SIZE(af9015_ir_table_a_link); | |
722 | break; | |
723 | case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3: | |
724 | af9015_properties[i].rc_key_map = | |
725 | af9015_rc_keys_msi; | |
726 | af9015_properties[i].rc_key_map_size = | |
727 | ARRAY_SIZE(af9015_rc_keys_msi); | |
728 | af9015_config.ir_table = af9015_ir_table_msi; | |
729 | af9015_config.ir_table_size = | |
730 | ARRAY_SIZE(af9015_ir_table_msi); | |
731 | break; | |
732 | case AF9015_REMOTE_MYGICTV_U718: | |
733 | af9015_properties[i].rc_key_map = | |
734 | af9015_rc_keys_mygictv; | |
735 | af9015_properties[i].rc_key_map_size = | |
736 | ARRAY_SIZE(af9015_rc_keys_mygictv); | |
737 | af9015_config.ir_table = | |
738 | af9015_ir_table_mygictv; | |
739 | af9015_config.ir_table_size = | |
740 | ARRAY_SIZE(af9015_ir_table_mygictv); | |
741 | break; | |
742 | } | |
743 | } else { | |
744 | switch (udev->descriptor.idVendor) { | |
541dfa87 | 745 | case USB_VID_LEADTEK: |
80619de8 AP |
746 | af9015_properties[i].rc_key_map = |
747 | af9015_rc_keys_leadtek; | |
748 | af9015_properties[i].rc_key_map_size = | |
749 | ARRAY_SIZE(af9015_rc_keys_leadtek); | |
750 | af9015_config.ir_table = | |
751 | af9015_ir_table_leadtek; | |
752 | af9015_config.ir_table_size = | |
753 | ARRAY_SIZE(af9015_ir_table_leadtek); | |
754 | break; | |
541dfa87 | 755 | case USB_VID_VISIONPLUS: |
80619de8 | 756 | if (udev->descriptor.idProduct == |
541dfa87 | 757 | USB_PID_AZUREWAVE_AD_TU700) { |
80619de8 AP |
758 | af9015_properties[i].rc_key_map = |
759 | af9015_rc_keys_twinhan; | |
760 | af9015_properties[i].rc_key_map_size = | |
761 | ARRAY_SIZE(af9015_rc_keys_twinhan); | |
762 | af9015_config.ir_table = | |
763 | af9015_ir_table_twinhan; | |
764 | af9015_config.ir_table_size = | |
765 | ARRAY_SIZE(af9015_ir_table_twinhan); | |
766 | } | |
767 | break; | |
541dfa87 | 768 | case USB_VID_KWORLD_2: |
80619de8 AP |
769 | /* TODO: use correct rc keys */ |
770 | af9015_properties[i].rc_key_map = | |
771 | af9015_rc_keys_twinhan; | |
772 | af9015_properties[i].rc_key_map_size = | |
773 | ARRAY_SIZE(af9015_rc_keys_twinhan); | |
774 | af9015_config.ir_table = af9015_ir_table_kworld; | |
775 | af9015_config.ir_table_size = | |
776 | ARRAY_SIZE(af9015_ir_table_kworld); | |
777 | break; | |
778 | /* Check USB manufacturer and product strings and try | |
779 | to determine correct remote in case of chip vendor | |
780 | reference IDs are used. */ | |
541dfa87 | 781 | case USB_VID_AFATECH: |
80619de8 AP |
782 | memset(manufacturer, 0, sizeof(manufacturer)); |
783 | usb_string(udev, udev->descriptor.iManufacturer, | |
784 | manufacturer, sizeof(manufacturer)); | |
785 | if (!strcmp("Geniatech", manufacturer)) { | |
786 | /* iManufacturer 1 Geniatech | |
787 | iProduct 2 AF9015 */ | |
788 | af9015_properties[i].rc_key_map = | |
789 | af9015_rc_keys_mygictv; | |
790 | af9015_properties[i].rc_key_map_size = | |
791 | ARRAY_SIZE(af9015_rc_keys_mygictv); | |
792 | af9015_config.ir_table = | |
793 | af9015_ir_table_mygictv; | |
794 | af9015_config.ir_table_size = | |
795 | ARRAY_SIZE(af9015_ir_table_mygictv); | |
796 | } else if (!strcmp("MSI", manufacturer)) { | |
797 | /* iManufacturer 1 MSI | |
798 | iProduct 2 MSI K-VOX */ | |
799 | af9015_properties[i].rc_key_map = | |
800 | af9015_rc_keys_msi; | |
801 | af9015_properties[i].rc_key_map_size = | |
802 | ARRAY_SIZE(af9015_rc_keys_msi); | |
803 | af9015_config.ir_table = | |
804 | af9015_ir_table_msi; | |
805 | af9015_config.ir_table_size = | |
806 | ARRAY_SIZE(af9015_ir_table_msi); | |
807 | } | |
808 | break; | |
809 | } | |
810 | } | |
811 | } | |
812 | ||
813 | /* TS mode - one or two receivers */ | |
814 | req.addr = AF9015_EEPROM_TS_MODE; | |
815 | ret = af9015_rw_udev(udev, &req); | |
816 | if (ret) | |
817 | goto error; | |
818 | af9015_config.dual_mode = val; | |
819 | deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode); | |
820 | /* disable dual mode by default because it is buggy */ | |
821 | if (!dvb_usb_af9015_dual_mode) | |
822 | af9015_config.dual_mode = 0; | |
823 | ||
824 | /* set buffer size according to USB port speed */ | |
825 | for (i = 0; i < af9015_properties_count; i++) { | |
826 | /* USB1.1 set smaller buffersize and disable 2nd adapter */ | |
827 | if (udev->speed == USB_SPEED_FULL) { | |
828 | af9015_properties[i].adapter->stream.u.bulk.buffersize = | |
829 | TS_USB11_MAX_PACKET_SIZE; | |
830 | /* disable 2nd adapter because we don't have | |
831 | PID-filters */ | |
832 | af9015_config.dual_mode = 0; | |
833 | } else { | |
834 | af9015_properties[i].adapter->stream.u.bulk.buffersize = | |
835 | TS_USB20_MAX_PACKET_SIZE; | |
836 | } | |
837 | } | |
838 | ||
839 | if (af9015_config.dual_mode) { | |
840 | /* read 2nd demodulator I2C address */ | |
841 | req.addr = AF9015_EEPROM_DEMOD2_I2C; | |
842 | ret = af9015_rw_udev(udev, &req); | |
843 | if (ret) | |
844 | goto error; | |
845 | af9015_af9013_config[1].demod_address = val; | |
846 | ||
847 | /* enable 2nd adapter */ | |
848 | for (i = 0; i < af9015_properties_count; i++) | |
849 | af9015_properties[i].num_adapters = 2; | |
850 | ||
851 | } else { | |
852 | /* disable 2nd adapter */ | |
853 | for (i = 0; i < af9015_properties_count; i++) | |
854 | af9015_properties[i].num_adapters = 1; | |
855 | } | |
856 | ||
857 | for (i = 0; i < af9015_properties[0].num_adapters; i++) { | |
858 | if (i == 1) | |
859 | offset = AF9015_EEPROM_OFFSET; | |
860 | /* xtal */ | |
861 | req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; | |
862 | ret = af9015_rw_udev(udev, &req); | |
863 | if (ret) | |
864 | goto error; | |
865 | switch (val) { | |
866 | case 0: | |
867 | af9015_af9013_config[i].adc_clock = 28800; | |
868 | break; | |
869 | case 1: | |
870 | af9015_af9013_config[i].adc_clock = 20480; | |
871 | break; | |
872 | case 2: | |
873 | af9015_af9013_config[i].adc_clock = 28000; | |
874 | break; | |
875 | case 3: | |
876 | af9015_af9013_config[i].adc_clock = 25000; | |
877 | break; | |
878 | }; | |
879 | deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i, | |
880 | val, af9015_af9013_config[i].adc_clock); | |
881 | ||
882 | /* tuner IF */ | |
883 | req.addr = AF9015_EEPROM_IF1H + offset; | |
884 | ret = af9015_rw_udev(udev, &req); | |
885 | if (ret) | |
886 | goto error; | |
887 | af9015_af9013_config[i].tuner_if = val << 8; | |
888 | req.addr = AF9015_EEPROM_IF1L + offset; | |
889 | ret = af9015_rw_udev(udev, &req); | |
890 | if (ret) | |
891 | goto error; | |
892 | af9015_af9013_config[i].tuner_if += val; | |
893 | deb_info("%s: [%d] IF1:%d\n", __func__, i, | |
894 | af9015_af9013_config[0].tuner_if); | |
895 | ||
896 | /* MT2060 IF1 */ | |
897 | req.addr = AF9015_EEPROM_MT2060_IF1H + offset; | |
898 | ret = af9015_rw_udev(udev, &req); | |
899 | if (ret) | |
900 | goto error; | |
901 | af9015_config.mt2060_if1[i] = val << 8; | |
902 | req.addr = AF9015_EEPROM_MT2060_IF1L + offset; | |
903 | ret = af9015_rw_udev(udev, &req); | |
904 | if (ret) | |
905 | goto error; | |
906 | af9015_config.mt2060_if1[i] += val; | |
907 | deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i, | |
908 | af9015_config.mt2060_if1[i]); | |
909 | ||
910 | /* tuner */ | |
911 | req.addr = AF9015_EEPROM_TUNER_ID1 + offset; | |
912 | ret = af9015_rw_udev(udev, &req); | |
913 | if (ret) | |
914 | goto error; | |
915 | switch (val) { | |
916 | case AF9013_TUNER_ENV77H11D5: | |
917 | case AF9013_TUNER_MT2060: | |
918 | case AF9013_TUNER_MC44S803: | |
919 | case AF9013_TUNER_QT1010: | |
920 | case AF9013_TUNER_UNKNOWN: | |
921 | case AF9013_TUNER_MT2060_2: | |
922 | case AF9013_TUNER_TDA18271: | |
923 | case AF9013_TUNER_QT1010A: | |
924 | af9015_af9013_config[i].rf_spec_inv = 1; | |
925 | break; | |
926 | case AF9013_TUNER_MXL5003D: | |
927 | case AF9013_TUNER_MXL5005D: | |
928 | case AF9013_TUNER_MXL5005R: | |
929 | af9015_af9013_config[i].rf_spec_inv = 0; | |
930 | break; | |
931 | default: | |
932 | warn("tuner id:%d not supported, please report!", val); | |
933 | return -ENODEV; | |
934 | }; | |
935 | ||
936 | af9015_af9013_config[i].tuner = val; | |
937 | deb_info("%s: [%d] tuner id:%d\n", __func__, i, val); | |
938 | } | |
939 | ||
940 | error: | |
941 | if (ret) | |
942 | err("eeprom read failed:%d", ret); | |
943 | ||
944 | return ret; | |
945 | } | |
946 | ||
947 | static int af9015_identify_state(struct usb_device *udev, | |
948 | struct dvb_usb_device_properties *props, | |
949 | struct dvb_usb_device_description **desc, | |
950 | int *cold) | |
951 | { | |
952 | int ret; | |
953 | u8 reply; | |
954 | struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; | |
955 | ||
956 | ret = af9015_rw_udev(udev, &req); | |
957 | if (ret) | |
958 | return ret; | |
959 | ||
960 | deb_info("%s: reply:%02x\n", __func__, reply); | |
961 | if (reply == 0x02) | |
962 | *cold = 0; | |
963 | else | |
964 | *cold = 1; | |
965 | ||
966 | return ret; | |
967 | } | |
968 | ||
969 | static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) | |
970 | { | |
971 | u8 buf[8]; | |
972 | struct req_t req = {GET_IR_CODE, 0, 0, 0, 0, sizeof(buf), buf}; | |
973 | struct dvb_usb_rc_key *keymap = d->props.rc_key_map; | |
974 | int i, ret; | |
975 | ||
976 | memset(buf, 0, sizeof(buf)); | |
977 | ||
978 | ret = af9015_ctrl_msg(d, &req); | |
979 | if (ret) | |
980 | return ret; | |
981 | ||
982 | *event = 0; | |
983 | *state = REMOTE_NO_KEY_PRESSED; | |
984 | ||
985 | for (i = 0; i < d->props.rc_key_map_size; i++) { | |
986 | if (!buf[1] && keymap[i].custom == buf[0] && | |
987 | keymap[i].data == buf[2]) { | |
988 | *event = keymap[i].event; | |
989 | *state = REMOTE_KEY_PRESSED; | |
990 | break; | |
991 | } | |
992 | } | |
993 | if (!buf[1]) | |
994 | deb_rc("%s: %02x %02x %02x %02x %02x %02x %02x %02x\n", | |
995 | __func__, buf[0], buf[1], buf[2], buf[3], buf[4], | |
996 | buf[5], buf[6], buf[7]); | |
997 | ||
998 | return 0; | |
999 | } | |
1000 | ||
1001 | /* init 2nd I2C adapter */ | |
1002 | int af9015_i2c_init(struct dvb_usb_device *d) | |
1003 | { | |
1004 | int ret; | |
1005 | struct af9015_state *state = d->priv; | |
1006 | deb_info("%s:\n", __func__); | |
1007 | ||
1008 | strncpy(state->i2c_adap.name, d->desc->name, | |
1009 | sizeof(state->i2c_adap.name)); | |
1010 | #ifdef I2C_ADAP_CLASS_TV_DIGITAL | |
1011 | state->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, | |
1012 | #else | |
1013 | state->i2c_adap.class = I2C_CLASS_TV_DIGITAL, | |
1014 | #endif | |
1015 | state->i2c_adap.algo = d->props.i2c_algo; | |
1016 | state->i2c_adap.algo_data = NULL; | |
1017 | state->i2c_adap.dev.parent = &d->udev->dev; | |
1018 | ||
1019 | i2c_set_adapdata(&state->i2c_adap, d); | |
1020 | ||
1021 | ret = i2c_add_adapter(&state->i2c_adap); | |
1022 | if (ret < 0) | |
1023 | err("could not add i2c adapter"); | |
1024 | ||
1025 | return ret; | |
1026 | } | |
1027 | ||
1028 | static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) | |
1029 | { | |
1030 | int ret; | |
1031 | struct af9015_state *state = adap->dev->priv; | |
1032 | struct i2c_adapter *i2c_adap; | |
1033 | ||
1034 | if (adap->id == 0) { | |
1035 | /* select I2C adapter */ | |
1036 | i2c_adap = &adap->dev->i2c_adap; | |
1037 | ||
1038 | deb_info("%s: init I2C\n", __func__); | |
1039 | ret = af9015_i2c_init(adap->dev); | |
1040 | ||
1041 | /* dump eeprom (debug) */ | |
1042 | ret = af9015_eeprom_dump(adap->dev); | |
1043 | if (ret) | |
1044 | return ret; | |
1045 | } else { | |
1046 | /* select I2C adapter */ | |
1047 | i2c_adap = &state->i2c_adap; | |
1048 | ||
1049 | /* copy firmware to 2nd demodulator */ | |
1050 | if (af9015_config.dual_mode) { | |
1051 | ret = af9015_copy_firmware(adap->dev); | |
1052 | if (ret) { | |
1053 | err("firmware copy to 2nd frontend " \ | |
1054 | "failed, will disable it"); | |
1055 | af9015_config.dual_mode = 0; | |
1056 | return -ENODEV; | |
1057 | } | |
1058 | } else { | |
1059 | return -ENODEV; | |
1060 | } | |
1061 | } | |
1062 | ||
1063 | /* attach demodulator */ | |
1064 | adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], | |
1065 | i2c_adap); | |
1066 | ||
1067 | return adap->fe == NULL ? -ENODEV : 0; | |
1068 | } | |
1069 | ||
1070 | static struct mt2060_config af9015_mt2060_config = { | |
1071 | .i2c_address = 0xc0, | |
1072 | .clock_out = 0, | |
1073 | }; | |
1074 | ||
1075 | static struct qt1010_config af9015_qt1010_config = { | |
1076 | .i2c_address = 0xc4, | |
1077 | }; | |
1078 | ||
1079 | static struct tda18271_config af9015_tda18271_config = { | |
1080 | .gate = TDA18271_GATE_DIGITAL, | |
1081 | .small_i2c = 1, | |
1082 | }; | |
1083 | ||
1084 | static struct mxl5005s_config af9015_mxl5003_config = { | |
1085 | .i2c_address = 0xc6, | |
1086 | .if_freq = IF_FREQ_4570000HZ, | |
1087 | .xtal_freq = CRYSTAL_FREQ_16000000HZ, | |
1088 | .agc_mode = MXL_SINGLE_AGC, | |
1089 | .tracking_filter = MXL_TF_DEFAULT, | |
a131077d | 1090 | .rssi_enable = MXL_RSSI_ENABLE, |
80619de8 AP |
1091 | .cap_select = MXL_CAP_SEL_ENABLE, |
1092 | .div_out = MXL_DIV_OUT_4, | |
1093 | .clock_out = MXL_CLOCK_OUT_DISABLE, | |
1094 | .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, | |
1095 | .top = MXL5005S_TOP_25P2, | |
1096 | .mod_mode = MXL_DIGITAL_MODE, | |
1097 | .if_mode = MXL_ZERO_IF, | |
1098 | .AgcMasterByte = 0x00, | |
1099 | }; | |
1100 | ||
1101 | static struct mxl5005s_config af9015_mxl5005_config = { | |
1102 | .i2c_address = 0xc6, | |
1103 | .if_freq = IF_FREQ_4570000HZ, | |
1104 | .xtal_freq = CRYSTAL_FREQ_16000000HZ, | |
1105 | .agc_mode = MXL_SINGLE_AGC, | |
1106 | .tracking_filter = MXL_TF_OFF, | |
a131077d | 1107 | .rssi_enable = MXL_RSSI_ENABLE, |
80619de8 AP |
1108 | .cap_select = MXL_CAP_SEL_ENABLE, |
1109 | .div_out = MXL_DIV_OUT_4, | |
1110 | .clock_out = MXL_CLOCK_OUT_DISABLE, | |
1111 | .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, | |
1112 | .top = MXL5005S_TOP_25P2, | |
1113 | .mod_mode = MXL_DIGITAL_MODE, | |
1114 | .if_mode = MXL_ZERO_IF, | |
1115 | .AgcMasterByte = 0x00, | |
1116 | }; | |
1117 | ||
1118 | static int af9015_tuner_attach(struct dvb_usb_adapter *adap) | |
1119 | { | |
1120 | struct af9015_state *state = adap->dev->priv; | |
1121 | struct i2c_adapter *i2c_adap; | |
1122 | int ret; | |
1123 | deb_info("%s: \n", __func__); | |
1124 | ||
1125 | /* select I2C adapter */ | |
1126 | if (adap->id == 0) | |
1127 | i2c_adap = &adap->dev->i2c_adap; | |
1128 | else | |
1129 | i2c_adap = &state->i2c_adap; | |
1130 | ||
1131 | switch (af9015_af9013_config[adap->id].tuner) { | |
1132 | case AF9013_TUNER_MT2060: | |
1133 | case AF9013_TUNER_MT2060_2: | |
1134 | ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap, | |
1135 | &af9015_mt2060_config, | |
1136 | af9015_config.mt2060_if1[adap->id]) | |
1137 | == NULL ? -ENODEV : 0; | |
1138 | break; | |
1139 | case AF9013_TUNER_QT1010: | |
1140 | case AF9013_TUNER_QT1010A: | |
1141 | ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap, | |
1142 | &af9015_qt1010_config) == NULL ? -ENODEV : 0; | |
1143 | break; | |
1144 | case AF9013_TUNER_TDA18271: | |
1145 | ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap, | |
1146 | &af9015_tda18271_config) == NULL ? -ENODEV : 0; | |
1147 | break; | |
1148 | case AF9013_TUNER_MXL5003D: | |
1149 | ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, | |
1150 | &af9015_mxl5003_config) == NULL ? -ENODEV : 0; | |
1151 | break; | |
1152 | case AF9013_TUNER_MXL5005D: | |
1153 | case AF9013_TUNER_MXL5005R: | |
1154 | ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, | |
1155 | &af9015_mxl5005_config) == NULL ? -ENODEV : 0; | |
1156 | break; | |
1157 | case AF9013_TUNER_ENV77H11D5: | |
1158 | ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap, | |
1159 | DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; | |
1160 | break; | |
1161 | case AF9013_TUNER_MC44S803: | |
1162 | #if 0 | |
1163 | ret = dvb_attach(mc44s80x_attach, adap->fe, i2c_adap) | |
1164 | == NULL ? -ENODEV : 0; | |
1165 | #else | |
1166 | ret = -ENODEV; | |
1167 | info("Freescale MC44S803 tuner found but no driver for that" \ | |
1168 | "tuner. Look at the Linuxtv.org for tuner driver" \ | |
1169 | "status."); | |
1170 | #endif | |
1171 | break; | |
1172 | case AF9013_TUNER_UNKNOWN: | |
1173 | default: | |
1174 | ret = -ENODEV; | |
1175 | err("Unknown tuner id:%d", | |
1176 | af9015_af9013_config[adap->id].tuner); | |
1177 | } | |
1178 | return ret; | |
1179 | } | |
1180 | ||
1181 | static struct usb_device_id af9015_usb_table[] = { | |
1182 | /* 0 */{USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)}, | |
1183 | {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)}, | |
1184 | {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)}, | |
1185 | {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)}, | |
1186 | {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)}, | |
1187 | /* 5 */{USB_DEVICE(USB_VID_VISIONPLUS, | |
1188 | USB_PID_TINYTWIN)}, | |
1189 | {USB_DEVICE(USB_VID_VISIONPLUS, | |
1190 | USB_PID_AZUREWAVE_AD_TU700)}, | |
1191 | {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)}, | |
1192 | {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)}, | |
1193 | {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)}, | |
1194 | /* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, | |
1195 | {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, | |
1196 | {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, | |
a3765888 | 1197 | {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, |
05c1cab5 | 1198 | {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, |
641015ab | 1199 | /* 15 */{USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)}, |
80619de8 AP |
1200 | {0}, |
1201 | }; | |
1202 | MODULE_DEVICE_TABLE(usb, af9015_usb_table); | |
1203 | ||
1204 | static struct dvb_usb_device_properties af9015_properties[] = { | |
1205 | { | |
1206 | .caps = DVB_USB_IS_AN_I2C_ADAPTER, | |
1207 | ||
1208 | .usb_ctrl = DEVICE_SPECIFIC, | |
1209 | .download_firmware = af9015_download_firmware, | |
1210 | .firmware = "dvb-usb-af9015.fw", | |
1211 | ||
1212 | .size_of_priv = sizeof(struct af9015_state), \ | |
1213 | ||
1214 | .num_adapters = 2, | |
1215 | .adapter = { | |
1216 | { | |
1217 | .caps = DVB_USB_ADAP_HAS_PID_FILTER | | |
1218 | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, | |
1219 | ||
1220 | .pid_filter_count = 32, | |
1221 | .pid_filter = af9015_pid_filter, | |
1222 | .pid_filter_ctrl = af9015_pid_filter_ctrl, | |
1223 | ||
1224 | .frontend_attach = | |
1225 | af9015_af9013_frontend_attach, | |
1226 | .tuner_attach = af9015_tuner_attach, | |
1227 | .stream = { | |
1228 | .type = USB_BULK, | |
1229 | .count = 6, | |
1230 | .endpoint = 0x84, | |
1231 | }, | |
1232 | }, | |
1233 | { | |
1234 | .frontend_attach = | |
1235 | af9015_af9013_frontend_attach, | |
1236 | .tuner_attach = af9015_tuner_attach, | |
1237 | .stream = { | |
1238 | .type = USB_BULK, | |
1239 | .count = 6, | |
1240 | .endpoint = 0x85, | |
1241 | }, | |
1242 | } | |
1243 | }, | |
1244 | ||
1245 | .identify_state = af9015_identify_state, | |
1246 | ||
1247 | .rc_query = af9015_rc_query, | |
1248 | .rc_interval = 150, | |
1249 | ||
1250 | .i2c_algo = &af9015_i2c_algo, | |
1251 | ||
1252 | .num_device_descs = 9, | |
1253 | .devices = { | |
1254 | { | |
1255 | .name = "Afatech AF9015 DVB-T USB2.0 stick", | |
1256 | .cold_ids = {&af9015_usb_table[0], | |
1257 | &af9015_usb_table[1], NULL}, | |
1258 | .warm_ids = {NULL}, | |
1259 | }, | |
1260 | { | |
1261 | .name = "Leadtek WinFast DTV Dongle Gold", | |
1262 | .cold_ids = {&af9015_usb_table[2], NULL}, | |
1263 | .warm_ids = {NULL}, | |
1264 | }, | |
1265 | { | |
1266 | .name = "Pinnacle PCTV 71e", | |
1267 | .cold_ids = {&af9015_usb_table[3], NULL}, | |
1268 | .warm_ids = {NULL}, | |
1269 | }, | |
1270 | { | |
1271 | .name = "KWorld PlusTV Dual DVB-T Stick " \ | |
1272 | "(DVB-T 399U)", | |
1273 | .cold_ids = {&af9015_usb_table[4], NULL}, | |
1274 | .warm_ids = {NULL}, | |
1275 | }, | |
1276 | { | |
1277 | .name = "DigitalNow TinyTwin DVB-T Receiver", | |
1278 | .cold_ids = {&af9015_usb_table[5], NULL}, | |
1279 | .warm_ids = {NULL}, | |
1280 | }, | |
1281 | { | |
1282 | .name = "TwinHan AzureWave AD-TU700(704J)", | |
1283 | .cold_ids = {&af9015_usb_table[6], NULL}, | |
1284 | .warm_ids = {NULL}, | |
1285 | }, | |
1286 | { | |
1287 | .name = "TerraTec Cinergy T USB XE", | |
1288 | .cold_ids = {&af9015_usb_table[7], NULL}, | |
1289 | .warm_ids = {NULL}, | |
1290 | }, | |
1291 | { | |
1292 | .name = "KWorld PlusTV Dual DVB-T PCI " \ | |
1293 | "(DVB-T PC160-2T)", | |
1294 | .cold_ids = {&af9015_usb_table[8], NULL}, | |
1295 | .warm_ids = {NULL}, | |
1296 | }, | |
1297 | { | |
1298 | .name = "AVerMedia AVerTV DVB-T Volar X", | |
1299 | .cold_ids = {&af9015_usb_table[9], NULL}, | |
1300 | .warm_ids = {NULL}, | |
1301 | }, | |
1302 | } | |
1303 | }, { | |
1304 | .caps = DVB_USB_IS_AN_I2C_ADAPTER, | |
1305 | ||
1306 | .usb_ctrl = DEVICE_SPECIFIC, | |
1307 | .download_firmware = af9015_download_firmware, | |
1308 | .firmware = "dvb-usb-af9015.fw", | |
1309 | ||
1310 | .size_of_priv = sizeof(struct af9015_state), \ | |
1311 | ||
1312 | .num_adapters = 2, | |
1313 | .adapter = { | |
1314 | { | |
1315 | .caps = DVB_USB_ADAP_HAS_PID_FILTER | | |
1316 | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, | |
1317 | ||
1318 | .pid_filter_count = 32, | |
1319 | .pid_filter = af9015_pid_filter, | |
1320 | .pid_filter_ctrl = af9015_pid_filter_ctrl, | |
1321 | ||
1322 | .frontend_attach = | |
1323 | af9015_af9013_frontend_attach, | |
1324 | .tuner_attach = af9015_tuner_attach, | |
1325 | .stream = { | |
1326 | .type = USB_BULK, | |
1327 | .count = 6, | |
1328 | .endpoint = 0x84, | |
1329 | }, | |
1330 | }, | |
1331 | { | |
1332 | .frontend_attach = | |
1333 | af9015_af9013_frontend_attach, | |
1334 | .tuner_attach = af9015_tuner_attach, | |
1335 | .stream = { | |
1336 | .type = USB_BULK, | |
1337 | .count = 6, | |
1338 | .endpoint = 0x85, | |
1339 | }, | |
1340 | } | |
1341 | }, | |
1342 | ||
1343 | .identify_state = af9015_identify_state, | |
1344 | ||
1345 | .rc_query = af9015_rc_query, | |
1346 | .rc_interval = 150, | |
1347 | ||
1348 | .i2c_algo = &af9015_i2c_algo, | |
1349 | ||
641015ab | 1350 | .num_device_descs = 6, |
80619de8 AP |
1351 | .devices = { |
1352 | { | |
1353 | .name = "Xtensions XD-380", | |
1354 | .cold_ids = {&af9015_usb_table[10], NULL}, | |
1355 | .warm_ids = {NULL}, | |
1356 | }, | |
1357 | { | |
1358 | .name = "MSI DIGIVOX Duo", | |
1359 | .cold_ids = {&af9015_usb_table[11], NULL}, | |
1360 | .warm_ids = {NULL}, | |
1361 | }, | |
1362 | { | |
1363 | .name = "Fujitsu-Siemens Slim Mobile USB DVB-T", | |
1364 | .cold_ids = {&af9015_usb_table[12], NULL}, | |
1365 | .warm_ids = {NULL}, | |
1366 | }, | |
111f9ecf | 1367 | { |
a3765888 | 1368 | .name = "Telestar Starstick 2", |
111f9ecf MO |
1369 | .cold_ids = {&af9015_usb_table[13], NULL}, |
1370 | .warm_ids = {NULL}, | |
1371 | }, | |
05c1cab5 AP |
1372 | { |
1373 | .name = "AVerMedia A309", | |
1374 | .cold_ids = {&af9015_usb_table[14], NULL}, | |
1375 | .warm_ids = {NULL}, | |
1376 | }, | |
641015ab HG |
1377 | { |
1378 | .name = "MSI Digi VOX mini III", | |
1379 | .cold_ids = {&af9015_usb_table[15], NULL}, | |
1380 | .warm_ids = {NULL}, | |
1381 | }, | |
80619de8 AP |
1382 | } |
1383 | } | |
1384 | }; | |
80619de8 AP |
1385 | |
1386 | static int af9015_usb_probe(struct usb_interface *intf, | |
1387 | const struct usb_device_id *id) | |
1388 | { | |
1389 | int ret = 0; | |
1390 | struct dvb_usb_device *d = NULL; | |
1391 | struct usb_device *udev = interface_to_usbdev(intf); | |
1392 | u8 i; | |
1393 | ||
1394 | deb_info("%s: interface:%d\n", __func__, | |
1395 | intf->cur_altsetting->desc.bInterfaceNumber); | |
1396 | ||
1397 | /* interface 0 is used by DVB-T receiver and | |
1398 | interface 1 is for remote controller (HID) */ | |
1399 | if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { | |
1400 | ret = af9015_read_config(udev); | |
1401 | if (ret) | |
1402 | return ret; | |
1403 | ||
1404 | for (i = 0; i < af9015_properties_count; i++) { | |
1405 | ret = dvb_usb_device_init(intf, &af9015_properties[i], | |
1406 | THIS_MODULE, &d, adapter_nr); | |
1407 | if (!ret) | |
1408 | break; | |
1409 | if (ret != -ENODEV) | |
1410 | return ret; | |
1411 | } | |
1412 | if (ret) | |
1413 | return ret; | |
1414 | ||
1415 | if (d) | |
1416 | ret = af9015_init(d); | |
1417 | } | |
1418 | ||
1419 | return ret; | |
1420 | } | |
1421 | ||
1422 | void af9015_i2c_exit(struct dvb_usb_device *d) | |
1423 | { | |
1424 | struct af9015_state *state = d->priv; | |
1425 | deb_info("%s: \n", __func__); | |
1426 | ||
1427 | /* remove 2nd I2C adapter */ | |
1428 | if (d->state & DVB_USB_STATE_I2C) | |
1429 | i2c_del_adapter(&state->i2c_adap); | |
1430 | } | |
1431 | ||
1432 | static void af9015_usb_device_exit(struct usb_interface *intf) | |
1433 | { | |
1434 | struct dvb_usb_device *d = usb_get_intfdata(intf); | |
1435 | deb_info("%s: \n", __func__); | |
1436 | ||
1437 | /* remove 2nd I2C adapter */ | |
1438 | if (d != NULL && d->desc != NULL) | |
1439 | af9015_i2c_exit(d); | |
1440 | ||
1441 | dvb_usb_device_exit(intf); | |
1442 | } | |
1443 | ||
1444 | /* usb specific object needed to register this driver with the usb subsystem */ | |
1445 | static struct usb_driver af9015_usb_driver = { | |
1446 | .name = "dvb_usb_af9015", | |
1447 | .probe = af9015_usb_probe, | |
1448 | .disconnect = af9015_usb_device_exit, | |
1449 | .id_table = af9015_usb_table, | |
1450 | }; | |
1451 | ||
1452 | /* module stuff */ | |
1453 | static int __init af9015_usb_module_init(void) | |
1454 | { | |
1455 | int ret; | |
1456 | ret = usb_register(&af9015_usb_driver); | |
1457 | if (ret) | |
1458 | err("module init failed:%d", ret); | |
1459 | ||
1460 | return ret; | |
1461 | } | |
1462 | ||
1463 | static void __exit af9015_usb_module_exit(void) | |
1464 | { | |
1465 | /* deregister this driver from the USB subsystem */ | |
1466 | usb_deregister(&af9015_usb_driver); | |
1467 | } | |
1468 | ||
1469 | module_init(af9015_usb_module_init); | |
1470 | module_exit(af9015_usb_module_exit); | |
1471 | ||
1472 | MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); | |
1473 | MODULE_DESCRIPTION("Driver for Afatech AF9015 DVB-T"); | |
1474 | MODULE_LICENSE("GPL"); |