Commit | Line | Data |
---|---|---|
cb7a01ac MCC |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
5 | if VIDEO_V4L2 | |
6 | ||
cb7a01ac | 7 | config VIDEO_IR_I2C |
fccea74f | 8 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
9 | depends on I2C && RC_CORE |
10 | default y | |
11 | ---help--- | |
12 | Most boards have an IR chip directly connected via GPIO. However, | |
13 | some video boards have the IR connected via I2C bus. | |
14 | ||
15 | If your board doesn't have an I2C IR chip, you may disable this | |
16 | option. | |
17 | ||
18 | In doubt, say Y. | |
19 | ||
20 | # | |
21 | # Encoder / Decoder module configuration | |
22 | # | |
23 | ||
24 | menu "Encoders, decoders, sensors and other helper chips" | |
5cc596c6 | 25 | visible if !MEDIA_SUBDRV_AUTOSELECT || COMPILE_TEST |
cb7a01ac MCC |
26 | |
27 | comment "Audio decoders, processors and mixers" | |
28 | ||
29 | config VIDEO_TVAUDIO | |
30 | tristate "Simple audio decoder chips" | |
31 | depends on VIDEO_V4L2 && I2C | |
32 | ---help--- | |
33 | Support for several audio decoder chips found on some bt8xx boards: | |
34 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
35 | tea6320, tea6420, tda8425, ta8874z. | |
36 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
37 | ||
38 | To compile this driver as a module, choose M here: the | |
39 | module will be called tvaudio. | |
40 | ||
41 | config VIDEO_TDA7432 | |
42 | tristate "Philips TDA7432 audio processor" | |
43 | depends on VIDEO_V4L2 && I2C | |
44 | ---help--- | |
45 | Support for tda7432 audio decoder chip found on some bt8xx boards. | |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called tda7432. | |
49 | ||
50 | config VIDEO_TDA9840 | |
51 | tristate "Philips TDA9840 audio processor" | |
52 | depends on I2C | |
53 | ---help--- | |
54 | Support for tda9840 audio decoder chip found on some Zoran boards. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called tda9840. | |
58 | ||
59 | config VIDEO_TEA6415C | |
60 | tristate "Philips TEA6415C audio processor" | |
61 | depends on I2C | |
62 | ---help--- | |
63 | Support for tea6415c audio decoder chip found on some bt8xx boards. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called tea6415c. | |
67 | ||
68 | config VIDEO_TEA6420 | |
69 | tristate "Philips TEA6420 audio processor" | |
70 | depends on I2C | |
71 | ---help--- | |
72 | Support for tea6420 audio decoder chip found on some bt8xx boards. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called tea6420. | |
76 | ||
77 | config VIDEO_MSP3400 | |
78 | tristate "Micronas MSP34xx audio decoders" | |
79 | depends on VIDEO_V4L2 && I2C | |
80 | ---help--- | |
81 | Support for the Micronas MSP34xx series of audio decoders. | |
82 | ||
83 | To compile this driver as a module, choose M here: the | |
84 | module will be called msp3400. | |
85 | ||
fc279cc2 HV |
86 | config VIDEO_CS3308 |
87 | tristate "Cirrus Logic CS3308 audio ADC" | |
88 | depends on VIDEO_V4L2 && I2C | |
89 | ---help--- | |
90 | Support for the Cirrus Logic CS3308 High Performance 8-Channel | |
91 | Analog Volume Control | |
92 | ||
93 | To compile this driver as a module, choose M here: the | |
94 | module will be called cs3308. | |
95 | ||
cb7a01ac MCC |
96 | config VIDEO_CS5345 |
97 | tristate "Cirrus Logic CS5345 audio ADC" | |
98 | depends on VIDEO_V4L2 && I2C | |
99 | ---help--- | |
100 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
101 | stereo A/D converter. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called cs5345. | |
105 | ||
106 | config VIDEO_CS53L32A | |
107 | tristate "Cirrus Logic CS53L32A audio ADC" | |
108 | depends on VIDEO_V4L2 && I2C | |
109 | ---help--- | |
110 | Support for the Cirrus Logic CS53L32A low voltage | |
111 | stereo A/D converter. | |
112 | ||
113 | To compile this driver as a module, choose M here: the | |
114 | module will be called cs53l32a. | |
115 | ||
116 | config VIDEO_TLV320AIC23B | |
117 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 118 | depends on VIDEO_V4L2 && I2C |
cb7a01ac MCC |
119 | ---help--- |
120 | Support for the Texas Instruments TLV320AIC23B audio codec. | |
121 | ||
122 | To compile this driver as a module, choose M here: the | |
123 | module will be called tlv320aic23b. | |
124 | ||
73d9f979 HV |
125 | config VIDEO_UDA1342 |
126 | tristate "Philips UDA1342 audio codec" | |
127 | depends on VIDEO_V4L2 && I2C | |
128 | ---help--- | |
129 | Support for the Philips UDA1342 audio codec. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called uda1342. | |
133 | ||
cb7a01ac MCC |
134 | config VIDEO_WM8775 |
135 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
136 | depends on VIDEO_V4L2 && I2C | |
137 | ---help--- | |
138 | Support for the Wolfson Microelectronics WM8775 high | |
139 | performance stereo A/D Converter with a 4 channel input mixer. | |
140 | ||
141 | To compile this driver as a module, choose M here: the | |
142 | module will be called wm8775. | |
143 | ||
144 | config VIDEO_WM8739 | |
145 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
146 | depends on VIDEO_V4L2 && I2C | |
147 | ---help--- | |
148 | Support for the Wolfson Microelectronics WM8739 | |
149 | stereo A/D Converter. | |
150 | ||
151 | To compile this driver as a module, choose M here: the | |
152 | module will be called wm8739. | |
153 | ||
154 | config VIDEO_VP27SMPX | |
c7c54a98 | 155 | tristate "Panasonic VP27's internal MPX" |
cb7a01ac MCC |
156 | depends on VIDEO_V4L2 && I2C |
157 | ---help--- | |
158 | Support for the internal MPX of the Panasonic VP27s tuner. | |
159 | ||
160 | To compile this driver as a module, choose M here: the | |
161 | module will be called vp27smpx. | |
162 | ||
c7c54a98 HV |
163 | config VIDEO_SONY_BTF_MPX |
164 | tristate "Sony BTF's internal MPX" | |
165 | depends on VIDEO_V4L2 && I2C | |
166 | help | |
167 | Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
168 | ||
169 | To compile this driver as a module, choose M here: the | |
170 | module will be called sony-btf-mpx. | |
171 | ||
cb7a01ac MCC |
172 | comment "RDS decoders" |
173 | ||
174 | config VIDEO_SAA6588 | |
175 | tristate "SAA6588 Radio Chip RDS decoder support" | |
176 | depends on VIDEO_V4L2 && I2C | |
177 | ||
178 | help | |
179 | Support for this Radio Data System (RDS) decoder. This allows | |
180 | seeing radio station identification transmitted using this | |
181 | standard. | |
182 | ||
183 | To compile this driver as a module, choose M here: the | |
184 | module will be called saa6588. | |
185 | ||
186 | comment "Video decoders" | |
187 | ||
188 | config VIDEO_ADV7180 | |
189 | tristate "Analog Devices ADV7180 decoder" | |
d5d51a82 | 190 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
191 | ---help--- |
192 | Support for the Analog Devices ADV7180 video decoder. | |
193 | ||
194 | To compile this driver as a module, choose M here: the | |
195 | module will be called adv7180. | |
196 | ||
197 | config VIDEO_ADV7183 | |
198 | tristate "Analog Devices ADV7183 decoder" | |
199 | depends on VIDEO_V4L2 && I2C | |
200 | ---help--- | |
201 | V4l2 subdevice driver for the Analog Devices | |
202 | ADV7183 video decoder. | |
203 | ||
204 | To compile this driver as a module, choose M here: the | |
205 | module will be called adv7183. | |
206 | ||
54450f59 HV |
207 | config VIDEO_ADV7604 |
208 | tristate "Analog Devices ADV7604 decoder" | |
2f8e75d2 GU |
209 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
210 | depends on GPIOLIB || COMPILE_TEST | |
516613c1 | 211 | select HDMI |
41a52373 | 212 | select MEDIA_CEC_EDID |
54450f59 HV |
213 | ---help--- |
214 | Support for the Analog Devices ADV7604 video decoder. | |
215 | ||
216 | This is a Analog Devices Component/Graphics Digitizer | |
217 | with 4:1 Multiplexed HDMI Receiver. | |
218 | ||
219 | To compile this driver as a module, choose M here: the | |
220 | module will be called adv7604. | |
221 | ||
41a52373 HV |
222 | config VIDEO_ADV7604_CEC |
223 | bool "Enable Analog Devices ADV7604 CEC support" | |
224 | depends on VIDEO_ADV7604 && MEDIA_CEC | |
225 | ---help--- | |
226 | When selected the adv7604 will support the optional | |
227 | HDMI CEC feature. | |
228 | ||
a89bcd4c HV |
229 | config VIDEO_ADV7842 |
230 | tristate "Analog Devices ADV7842 decoder" | |
584ca025 | 231 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
09f90c53 | 232 | select HDMI |
25c84fb1 | 233 | select MEDIA_CEC_EDID |
a89bcd4c HV |
234 | ---help--- |
235 | Support for the Analog Devices ADV7842 video decoder. | |
236 | ||
237 | This is a Analog Devices Component/Graphics/SD Digitizer | |
238 | with 2:1 Multiplexed HDMI Receiver. | |
239 | ||
240 | To compile this driver as a module, choose M here: the | |
241 | module will be called adv7842. | |
242 | ||
25c84fb1 HV |
243 | config VIDEO_ADV7842_CEC |
244 | bool "Enable Analog Devices ADV7842 CEC support" | |
245 | depends on VIDEO_ADV7842 && MEDIA_CEC | |
246 | ---help--- | |
247 | When selected the adv7842 will support the optional | |
248 | HDMI CEC feature. | |
249 | ||
cb7a01ac MCC |
250 | config VIDEO_BT819 |
251 | tristate "BT819A VideoStream decoder" | |
252 | depends on VIDEO_V4L2 && I2C | |
253 | ---help--- | |
254 | Support for BT819A video decoder. | |
255 | ||
256 | To compile this driver as a module, choose M here: the | |
257 | module will be called bt819. | |
258 | ||
259 | config VIDEO_BT856 | |
260 | tristate "BT856 VideoStream decoder" | |
261 | depends on VIDEO_V4L2 && I2C | |
262 | ---help--- | |
263 | Support for BT856 video decoder. | |
264 | ||
265 | To compile this driver as a module, choose M here: the | |
266 | module will be called bt856. | |
267 | ||
268 | config VIDEO_BT866 | |
269 | tristate "BT866 VideoStream decoder" | |
270 | depends on VIDEO_V4L2 && I2C | |
271 | ---help--- | |
272 | Support for BT866 video decoder. | |
273 | ||
274 | To compile this driver as a module, choose M here: the | |
275 | module will be called bt866. | |
276 | ||
277 | config VIDEO_KS0127 | |
278 | tristate "KS0127 video decoder" | |
279 | depends on VIDEO_V4L2 && I2C | |
280 | ---help--- | |
281 | Support for KS0127 video decoder. | |
282 | ||
283 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
284 | cards. | |
285 | ||
286 | To compile this driver as a module, choose M here: the | |
287 | module will be called ks0127. | |
288 | ||
ed3e12d2 VB |
289 | config VIDEO_ML86V7667 |
290 | tristate "OKI ML86V7667 video decoder" | |
291 | depends on VIDEO_V4L2 && I2C | |
292 | ---help--- | |
293 | Support for the OKI Semiconductor ML86V7667 video decoder. | |
294 | ||
295 | To compile this driver as a module, choose M here: the | |
296 | module will be called ml86v7667. | |
297 | ||
cb7a01ac MCC |
298 | config VIDEO_SAA7110 |
299 | tristate "Philips SAA7110 video decoder" | |
300 | depends on VIDEO_V4L2 && I2C | |
301 | ---help--- | |
302 | Support for the Philips SAA7110 video decoders. | |
303 | ||
304 | To compile this driver as a module, choose M here: the | |
305 | module will be called saa7110. | |
306 | ||
307 | config VIDEO_SAA711X | |
308 | tristate "Philips SAA7111/3/4/5 video decoders" | |
309 | depends on VIDEO_V4L2 && I2C | |
310 | ---help--- | |
311 | Support for the Philips SAA7111/3/4/5 video decoders. | |
312 | ||
313 | To compile this driver as a module, choose M here: the | |
314 | module will be called saa7115. | |
315 | ||
d32d9864 MR |
316 | config VIDEO_TC358743 |
317 | tristate "Toshiba TC358743 decoder" | |
22dbe35a HV |
318 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
319 | select HDMI | |
d32d9864 MR |
320 | ---help--- |
321 | Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. | |
322 | ||
323 | To compile this driver as a module, choose M here: the | |
324 | module will be called tc358743. | |
325 | ||
cb7a01ac MCC |
326 | config VIDEO_TVP514X |
327 | tristate "Texas Instruments TVP514x video decoder" | |
328 | depends on VIDEO_V4L2 && I2C | |
329 | ---help--- | |
330 | This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
331 | decoder. It is currently working with the TI OMAP3 camera | |
332 | controller. | |
333 | ||
334 | To compile this driver as a module, choose M here: the | |
335 | module will be called tvp514x. | |
336 | ||
337 | config VIDEO_TVP5150 | |
338 | tristate "Texas Instruments TVP5150 video decoder" | |
339 | depends on VIDEO_V4L2 && I2C | |
340 | ---help--- | |
341 | Support for the Texas Instruments TVP5150 video decoder. | |
342 | ||
343 | To compile this driver as a module, choose M here: the | |
344 | module will be called tvp5150. | |
345 | ||
346 | config VIDEO_TVP7002 | |
347 | tristate "Texas Instruments TVP7002 video decoder" | |
348 | depends on VIDEO_V4L2 && I2C | |
349 | ---help--- | |
350 | Support for the Texas Instruments TVP7002 video decoder. | |
351 | ||
352 | To compile this driver as a module, choose M here: the | |
353 | module will be called tvp7002. | |
354 | ||
12be52a9 HV |
355 | config VIDEO_TW2804 |
356 | tristate "Techwell TW2804 multiple video decoder" | |
357 | depends on VIDEO_V4L2 && I2C | |
358 | ---help--- | |
359 | Support for the Techwell tw2804 multiple video decoder. | |
360 | ||
361 | To compile this driver as a module, choose M here: the | |
362 | module will be called tw2804. | |
363 | ||
0890ec19 HV |
364 | config VIDEO_TW9903 |
365 | tristate "Techwell TW9903 video decoder" | |
366 | depends on VIDEO_V4L2 && I2C | |
367 | ---help--- | |
12be52a9 | 368 | Support for the Techwell tw9903 multi-standard video decoder |
0890ec19 HV |
369 | with high quality down scaler. |
370 | ||
371 | To compile this driver as a module, choose M here: the | |
372 | module will be called tw9903. | |
373 | ||
a000e9a0 HV |
374 | config VIDEO_TW9906 |
375 | tristate "Techwell TW9906 video decoder" | |
376 | depends on VIDEO_V4L2 && I2C | |
377 | ---help--- | |
378 | Support for the Techwell tw9906 enhanced multi-standard comb filter | |
379 | video decoder with YCbCr input support. | |
380 | ||
381 | To compile this driver as a module, choose M here: the | |
382 | module will be called tw9906. | |
383 | ||
cb7a01ac MCC |
384 | config VIDEO_VPX3220 |
385 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
386 | depends on VIDEO_V4L2 && I2C | |
387 | ---help--- | |
388 | Support for VPX322x video decoders. | |
389 | ||
390 | To compile this driver as a module, choose M here: the | |
391 | module will be called vpx3220. | |
392 | ||
393 | comment "Video and audio decoders" | |
394 | ||
395 | config VIDEO_SAA717X | |
396 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
397 | depends on VIDEO_V4L2 && I2C | |
398 | ---help--- | |
399 | Support for the Philips SAA7171/3/4 audio/video decoders. | |
400 | ||
401 | To compile this driver as a module, choose M here: the | |
402 | module will be called saa717x. | |
403 | ||
404 | source "drivers/media/i2c/cx25840/Kconfig" | |
405 | ||
cb7a01ac MCC |
406 | comment "Video encoders" |
407 | ||
408 | config VIDEO_SAA7127 | |
409 | tristate "Philips SAA7127/9 digital video encoders" | |
410 | depends on VIDEO_V4L2 && I2C | |
411 | ---help--- | |
412 | Support for the Philips SAA7127/9 digital video encoders. | |
413 | ||
414 | To compile this driver as a module, choose M here: the | |
415 | module will be called saa7127. | |
416 | ||
417 | config VIDEO_SAA7185 | |
418 | tristate "Philips SAA7185 video encoder" | |
419 | depends on VIDEO_V4L2 && I2C | |
420 | ---help--- | |
421 | Support for the Philips SAA7185 video encoder. | |
422 | ||
423 | To compile this driver as a module, choose M here: the | |
424 | module will be called saa7185. | |
425 | ||
426 | config VIDEO_ADV7170 | |
427 | tristate "Analog Devices ADV7170 video encoder" | |
428 | depends on VIDEO_V4L2 && I2C | |
429 | ---help--- | |
430 | Support for the Analog Devices ADV7170 video encoder driver | |
431 | ||
432 | To compile this driver as a module, choose M here: the | |
433 | module will be called adv7170. | |
434 | ||
435 | config VIDEO_ADV7175 | |
436 | tristate "Analog Devices ADV7175 video encoder" | |
437 | depends on VIDEO_V4L2 && I2C | |
438 | ---help--- | |
439 | Support for the Analog Devices ADV7175 video encoder driver | |
440 | ||
441 | To compile this driver as a module, choose M here: the | |
442 | module will be called adv7175. | |
443 | ||
444 | config VIDEO_ADV7343 | |
445 | tristate "ADV7343 video encoder" | |
446 | depends on I2C | |
447 | help | |
448 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
449 | ||
450 | To compile this driver as a module, choose M here: the | |
451 | module will be called adv7343. | |
452 | ||
453 | config VIDEO_ADV7393 | |
454 | tristate "ADV7393 video encoder" | |
455 | depends on I2C | |
456 | help | |
457 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
458 | ||
459 | To compile this driver as a module, choose M here: the | |
460 | module will be called adv7393. | |
461 | ||
5a544cce HV |
462 | config VIDEO_ADV7511 |
463 | tristate "Analog Devices ADV7511 encoder" | |
584ca025 | 464 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
b4dbad8f | 465 | select HDMI |
257d4eae | 466 | select MEDIA_CEC_EDID |
5a544cce HV |
467 | ---help--- |
468 | Support for the Analog Devices ADV7511 video encoder. | |
469 | ||
470 | This is a Analog Devices HDMI transmitter. | |
471 | ||
472 | To compile this driver as a module, choose M here: the | |
473 | module will be called adv7511. | |
474 | ||
257d4eae HV |
475 | config VIDEO_ADV7511_CEC |
476 | bool "Enable Analog Devices ADV7511 CEC support" | |
477 | depends on VIDEO_ADV7511 && MEDIA_CEC | |
478 | ---help--- | |
479 | When selected the adv7511 will support the optional | |
480 | HDMI CEC feature. | |
481 | ||
117a55b6 HV |
482 | config VIDEO_AD9389B |
483 | tristate "Analog Devices AD9389B encoder" | |
484 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
485 | ---help--- | |
486 | Support for the Analog Devices AD9389B video encoder. | |
487 | ||
488 | This is a Analog Devices HDMI transmitter. | |
489 | ||
490 | To compile this driver as a module, choose M here: the | |
491 | module will be called ad9389b. | |
492 | ||
cb7a01ac MCC |
493 | config VIDEO_AK881X |
494 | tristate "AK8813/AK8814 video encoders" | |
495 | depends on I2C | |
496 | help | |
497 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
498 | ||
14735190 HV |
499 | config VIDEO_THS8200 |
500 | tristate "Texas Instruments THS8200 video encoder" | |
501 | depends on VIDEO_V4L2 && I2C | |
502 | ---help--- | |
503 | Support for the Texas Instruments THS8200 video encoder. | |
504 | ||
505 | To compile this driver as a module, choose M here: the | |
506 | module will be called ths8200. | |
507 | ||
cb7a01ac MCC |
508 | comment "Camera sensor devices" |
509 | ||
510 | config VIDEO_APTINA_PLL | |
511 | tristate | |
512 | ||
513 | config VIDEO_SMIAPP_PLL | |
514 | tristate | |
515 | ||
c4c0283a BP |
516 | config VIDEO_OV2659 |
517 | tristate "OmniVision OV2659 sensor support" | |
518 | depends on VIDEO_V4L2 && I2C | |
519 | depends on MEDIA_CAMERA_SUPPORT | |
520 | ---help--- | |
521 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
522 | OV2659 camera. | |
523 | ||
524 | To compile this driver as a module, choose M here: the | |
525 | module will be called ov2659. | |
526 | ||
ec367c3c HV |
527 | config VIDEO_OV7640 |
528 | tristate "OmniVision OV7640 sensor support" | |
529 | depends on I2C && VIDEO_V4L2 | |
530 | depends on MEDIA_CAMERA_SUPPORT | |
531 | ---help--- | |
532 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
533 | OV7640 camera. | |
534 | ||
535 | To compile this driver as a module, choose M here: the | |
536 | module will be called ov7640. | |
537 | ||
cb7a01ac MCC |
538 | config VIDEO_OV7670 |
539 | tristate "OmniVision OV7670 sensor support" | |
540 | depends on I2C && VIDEO_V4L2 | |
541 | depends on MEDIA_CAMERA_SUPPORT | |
542 | ---help--- | |
543 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
544 | OV7670 VGA camera. It currently only works with the M88ALP01 | |
545 | controller. | |
546 | ||
84a15ded SN |
547 | config VIDEO_OV9650 |
548 | tristate "OmniVision OV9650/OV9652 sensor support" | |
549 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
550 | ---help--- | |
551 | This is a V4L2 sensor-level driver for the Omnivision | |
552 | OV9650 and OV9652 camera sensors. | |
553 | ||
cb7a01ac MCC |
554 | config VIDEO_VS6624 |
555 | tristate "ST VS6624 sensor support" | |
556 | depends on VIDEO_V4L2 && I2C | |
557 | depends on MEDIA_CAMERA_SUPPORT | |
558 | ---help--- | |
559 | This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
560 | camera. | |
561 | ||
562 | To compile this driver as a module, choose M here: the | |
563 | module will be called vs6624. | |
564 | ||
565 | config VIDEO_MT9M032 | |
566 | tristate "MT9M032 camera sensor support" | |
567 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
568 | depends on MEDIA_CAMERA_SUPPORT | |
569 | select VIDEO_APTINA_PLL | |
570 | ---help--- | |
571 | This driver supports MT9M032 camera sensors from Aptina, monochrome | |
572 | models only. | |
573 | ||
574 | config VIDEO_MT9P031 | |
575 | tristate "Aptina MT9P031 support" | |
576 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
577 | depends on MEDIA_CAMERA_SUPPORT | |
578 | select VIDEO_APTINA_PLL | |
579 | ---help--- | |
580 | This is a Video4Linux2 sensor-level driver for the Aptina | |
581 | (Micron) mt9p031 5 Mpixel camera. | |
582 | ||
583 | config VIDEO_MT9T001 | |
584 | tristate "Aptina MT9T001 support" | |
585 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
586 | depends on MEDIA_CAMERA_SUPPORT | |
587 | ---help--- | |
588 | This is a Video4Linux2 sensor-level driver for the Aptina | |
589 | (Micron) mt0t001 3 Mpixel camera. | |
590 | ||
591 | config VIDEO_MT9V011 | |
592 | tristate "Micron mt9v011 sensor support" | |
593 | depends on I2C && VIDEO_V4L2 | |
594 | depends on MEDIA_CAMERA_SUPPORT | |
595 | ---help--- | |
596 | This is a Video4Linux2 sensor-level driver for the Micron | |
597 | mt0v011 1.3 Mpixel camera. It currently only works with the | |
598 | em28xx driver. | |
599 | ||
600 | config VIDEO_MT9V032 | |
601 | tristate "Micron MT9V032 sensor support" | |
602 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
603 | depends on MEDIA_CAMERA_SUPPORT | |
80b44ef2 | 604 | select REGMAP_I2C |
cb7a01ac MCC |
605 | ---help--- |
606 | This is a Video4Linux2 sensor-level driver for the Micron | |
607 | MT9V032 752x480 CMOS sensor. | |
608 | ||
cb7a01ac MCC |
609 | config VIDEO_SR030PC30 |
610 | tristate "Siliconfile SR030PC30 sensor support" | |
611 | depends on I2C && VIDEO_V4L2 | |
612 | depends on MEDIA_CAMERA_SUPPORT | |
613 | ---help--- | |
614 | This driver supports SR030PC30 VGA camera from Siliconfile | |
615 | ||
616 | config VIDEO_NOON010PC30 | |
617 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 618 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
619 | depends on MEDIA_CAMERA_SUPPORT |
620 | ---help--- | |
621 | This driver supports NOON010PC30 CIF camera from Siliconfile | |
622 | ||
623 | source "drivers/media/i2c/m5mols/Kconfig" | |
624 | ||
625 | config VIDEO_S5K6AA | |
626 | tristate "Samsung S5K6AAFX sensor support" | |
627 | depends on MEDIA_CAMERA_SUPPORT | |
628 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
629 | ---help--- | |
630 | This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
631 | camera sensor with an embedded SoC image signal processor. | |
632 | ||
814b4dd9 SN |
633 | config VIDEO_S5K6A3 |
634 | tristate "Samsung S5K6A3 sensor support" | |
635 | depends on MEDIA_CAMERA_SUPPORT | |
636 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
637 | ---help--- | |
638 | This is a V4L2 sensor-level driver for Samsung S5K6A3 raw | |
639 | camera sensor. | |
640 | ||
8b99312b SL |
641 | config VIDEO_S5K4ECGX |
642 | tristate "Samsung S5K4ECGX sensor support" | |
643 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
644 | ---help--- | |
645 | This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
646 | camera sensor with an embedded SoC image signal processor. | |
647 | ||
7d459937 AH |
648 | config VIDEO_S5K5BAF |
649 | tristate "Samsung S5K5BAF sensor support" | |
650 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
651 | ---help--- | |
652 | This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M | |
653 | camera sensor with an embedded SoC image signal processor. | |
654 | ||
cb7a01ac MCC |
655 | source "drivers/media/i2c/smiapp/Kconfig" |
656 | ||
cac47f18 AH |
657 | config VIDEO_S5C73M3 |
658 | tristate "Samsung S5C73M3 sensor support" | |
659 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
660 | ---help--- | |
4494f0fd GG |
661 | This is a V4L2 sensor-level driver for Samsung S5C73M3 |
662 | 8 Mpixel camera. | |
cac47f18 | 663 | |
cb7a01ac MCC |
664 | comment "Flash devices" |
665 | ||
666 | config VIDEO_ADP1653 | |
667 | tristate "ADP1653 flash support" | |
668 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
669 | depends on MEDIA_CAMERA_SUPPORT | |
670 | ---help--- | |
671 | This is a driver for the ADP1653 flash controller. It is used for | |
672 | example in Nokia N900. | |
673 | ||
674 | config VIDEO_AS3645A | |
675 | tristate "AS3645A flash driver support" | |
676 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
677 | depends on MEDIA_CAMERA_SUPPORT | |
678 | ---help--- | |
679 | This is a driver for the AS3645A and LM3555 flash controllers. It has | |
680 | build in control for flash, torch and indicator LEDs. | |
681 | ||
7f6b11a1 DJ |
682 | config VIDEO_LM3560 |
683 | tristate "LM3560 dual flash driver support" | |
684 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
685 | depends on MEDIA_CAMERA_SUPPORT | |
686 | select REGMAP_I2C | |
687 | ---help--- | |
688 | This is a driver for the lm3560 dual flash controllers. It controls | |
689 | flash, torch LEDs. | |
690 | ||
dc76df5d DJ |
691 | config VIDEO_LM3646 |
692 | tristate "LM3646 dual flash driver support" | |
693 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
694 | depends on MEDIA_CAMERA_SUPPORT | |
695 | select REGMAP_I2C | |
696 | ---help--- | |
697 | This is a driver for the lm3646 dual flash controllers. It controls | |
698 | flash, torch LEDs. | |
699 | ||
cb7a01ac MCC |
700 | comment "Video improvement chips" |
701 | ||
702 | config VIDEO_UPD64031A | |
703 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
704 | depends on VIDEO_V4L2 && I2C | |
705 | ---help--- | |
706 | Support for the NEC Electronics uPD64031A Ghost Reduction | |
707 | video chip. It is most often found in NTSC TV cards made for | |
708 | Japan and is used to reduce the 'ghosting' effect that can | |
709 | be present in analog TV broadcasts. | |
710 | ||
711 | To compile this driver as a module, choose M here: the | |
712 | module will be called upd64031a. | |
713 | ||
714 | config VIDEO_UPD64083 | |
715 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
716 | depends on VIDEO_V4L2 && I2C | |
717 | ---help--- | |
718 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
719 | separation video chip. It is used to improve the quality of | |
720 | the colors of a composite signal. | |
721 | ||
722 | To compile this driver as a module, choose M here: the | |
723 | module will be called upd64083. | |
724 | ||
6052ba35 HV |
725 | comment "Audio/Video compression chips" |
726 | ||
727 | config VIDEO_SAA6752HS | |
728 | tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" | |
729 | depends on VIDEO_V4L2 && I2C | |
d984d325 | 730 | select CRC32 |
6052ba35 HV |
731 | ---help--- |
732 | Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 | |
733 | audio encoder with multiplexer. | |
734 | ||
735 | To compile this driver as a module, choose M here: the | |
736 | module will be called saa6752hs. | |
737 | ||
8c88126b | 738 | comment "Miscellaneous helper chips" |
cb7a01ac MCC |
739 | |
740 | config VIDEO_THS7303 | |
88da0183 LP |
741 | tristate "THS7303/53 Video Amplifier" |
742 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 743 | help |
88da0183 | 744 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
745 | |
746 | To compile this driver as a module, choose M here: the | |
747 | module will be called ths7303. | |
748 | ||
749 | config VIDEO_M52790 | |
750 | tristate "Mitsubishi M52790 A/V switch" | |
751 | depends on VIDEO_V4L2 && I2C | |
752 | ---help--- | |
753 | Support for the Mitsubishi M52790 A/V switch. | |
754 | ||
755 | To compile this driver as a module, choose M here: the | |
756 | module will be called m52790. | |
fccea74f | 757 | endmenu |
e9d2f057 | 758 | |
fccea74f | 759 | menu "Sensors used on soc_camera driver" |
cb7a01ac | 760 | |
2a2d1cf4 MCC |
761 | if SOC_CAMERA |
762 | source "drivers/media/i2c/soc_camera/Kconfig" | |
763 | endif | |
764 | ||
cb7a01ac | 765 | endmenu |
fccea74f | 766 | |
cb7a01ac | 767 | endif |