Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
578333ab AS |
2 | * Enhanced Host Controller Interface (EHCI) driver for USB. |
3 | * | |
4 | * Maintainer: Alan Stern <stern@rowland.harvard.edu> | |
5 | * | |
1da177e4 | 6 | * Copyright (c) 2000-2004 by David Brownell |
53bd6a60 | 7 | * |
1da177e4 LT |
8 | * This program is free software; you can redistribute it and/or modify it |
9 | * under the terms of the GNU General Public License as published by the | |
10 | * Free Software Foundation; either version 2 of the License, or (at your | |
11 | * option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but | |
14 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
15 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
16 | * for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software Foundation, | |
20 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | */ | |
22 | ||
1da177e4 LT |
23 | #include <linux/module.h> |
24 | #include <linux/pci.h> | |
25 | #include <linux/dmapool.h> | |
26 | #include <linux/kernel.h> | |
27 | #include <linux/delay.h> | |
28 | #include <linux/ioport.h> | |
29 | #include <linux/sched.h> | |
3c04e20e | 30 | #include <linux/vmalloc.h> |
1da177e4 LT |
31 | #include <linux/errno.h> |
32 | #include <linux/init.h> | |
d58b4bcc | 33 | #include <linux/hrtimer.h> |
1da177e4 LT |
34 | #include <linux/list.h> |
35 | #include <linux/interrupt.h> | |
1da177e4 | 36 | #include <linux/usb.h> |
27729aad | 37 | #include <linux/usb/hcd.h> |
1da177e4 LT |
38 | #include <linux/moduleparam.h> |
39 | #include <linux/dma-mapping.h> | |
694cc208 | 40 | #include <linux/debugfs.h> |
5a0e3ad6 | 41 | #include <linux/slab.h> |
1da177e4 | 42 | |
1da177e4 LT |
43 | #include <asm/byteorder.h> |
44 | #include <asm/io.h> | |
45 | #include <asm/irq.h> | |
1da177e4 | 46 | #include <asm/unaligned.h> |
1da177e4 | 47 | |
df7c1ca2 GL |
48 | #if defined(CONFIG_PPC_PS3) |
49 | #include <asm/firmware.h> | |
50 | #endif | |
51 | ||
1da177e4 LT |
52 | /*-------------------------------------------------------------------------*/ |
53 | ||
54 | /* | |
55 | * EHCI hc_driver implementation ... experimental, incomplete. | |
56 | * Based on the final 1.0 register interface specification. | |
57 | * | |
58 | * USB 2.0 shows up in upcoming www.pcmcia.org technology. | |
59 | * First was PCMCIA, like ISA; then CardBus, which is PCI. | |
60 | * Next comes "CardBay", using USB 2.0 signals. | |
61 | * | |
62 | * Contains additional contributions by Brad Hards, Rory Bolt, and others. | |
63 | * Special thanks to Intel and VIA for providing host controllers to | |
64 | * test this driver on, and Cypress (including In-System Design) for | |
65 | * providing early devices for those host controllers to talk to! | |
1da177e4 LT |
66 | */ |
67 | ||
1da177e4 LT |
68 | #define DRIVER_AUTHOR "David Brownell" |
69 | #define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver" | |
70 | ||
71 | static const char hcd_name [] = "ehci_hcd"; | |
72 | ||
73 | ||
1da177e4 LT |
74 | #undef EHCI_URB_TRACE |
75 | ||
1da177e4 LT |
76 | /* magic numbers that can affect system performance */ |
77 | #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ | |
78 | #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ | |
79 | #define EHCI_TUNE_RL_TT 0 | |
80 | #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ | |
81 | #define EHCI_TUNE_MULT_TT 1 | |
ffda0803 AS |
82 | /* |
83 | * Some drivers think it's safe to schedule isochronous transfers more than | |
84 | * 256 ms into the future (partly as a result of an old bug in the scheduling | |
85 | * code). In an attempt to avoid trouble, we will use a minimum scheduling | |
86 | * length of 512 frames instead of 256. | |
87 | */ | |
88 | #define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */ | |
1da177e4 | 89 | |
1da177e4 LT |
90 | /* Initial IRQ latency: faster than hw default */ |
91 | static int log2_irq_thresh = 0; // 0 to 6 | |
92 | module_param (log2_irq_thresh, int, S_IRUGO); | |
93 | MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes"); | |
94 | ||
95 | /* initial park setting: slower than hw default */ | |
96 | static unsigned park = 0; | |
97 | module_param (park, uint, S_IRUGO); | |
98 | MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); | |
99 | ||
93f1a47c | 100 | /* for flakey hardware, ignore overcurrent indicators */ |
900937c0 | 101 | static bool ignore_oc; |
93f1a47c DB |
102 | module_param (ignore_oc, bool, S_IRUGO); |
103 | MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); | |
104 | ||
1da177e4 LT |
105 | #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) |
106 | ||
107 | /*-------------------------------------------------------------------------*/ | |
108 | ||
109 | #include "ehci.h" | |
ad93562b | 110 | #include "pci-quirks.h" |
1da177e4 | 111 | |
b35c5009 AS |
112 | static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE], |
113 | struct ehci_tt *tt); | |
114 | ||
acc08503 AS |
115 | /* |
116 | * The MosChip MCS9990 controller updates its microframe counter | |
117 | * a little before the frame counter, and occasionally we will read | |
118 | * the invalid intermediate value. Avoid problems by checking the | |
119 | * microframe number (the low-order 3 bits); if they are 0 then | |
120 | * re-read the register to get the correct value. | |
121 | */ | |
122 | static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci) | |
123 | { | |
124 | unsigned uf; | |
125 | ||
126 | uf = ehci_readl(ehci, &ehci->regs->frame_index); | |
127 | if (unlikely((uf & 7) == 0)) | |
128 | uf = ehci_readl(ehci, &ehci->regs->frame_index); | |
129 | return uf; | |
130 | } | |
131 | ||
132 | static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci) | |
133 | { | |
134 | if (ehci->frame_index_bug) | |
135 | return ehci_moschip_read_frame_index(ehci); | |
136 | return ehci_readl(ehci, &ehci->regs->frame_index); | |
137 | } | |
138 | ||
139 | #include "ehci-dbg.c" | |
140 | ||
1da177e4 LT |
141 | /*-------------------------------------------------------------------------*/ |
142 | ||
143 | /* | |
2f3a6b86 | 144 | * ehci_handshake - spin reading hc until handshake completes or fails |
1da177e4 LT |
145 | * @ptr: address of hc register to be read |
146 | * @mask: bits to look at in result of read | |
147 | * @done: value of those bits when handshake succeeds | |
148 | * @usec: timeout in microseconds | |
149 | * | |
150 | * Returns negative errno, or zero on success | |
151 | * | |
152 | * Success happens when the "mask" bits have the specified value (hardware | |
153 | * handshake done). There are two failure modes: "usec" have passed (major | |
154 | * hardware flakeout), or the register reads as all-ones (hardware removed). | |
155 | * | |
156 | * That last failure should_only happen in cases like physical cardbus eject | |
157 | * before driver shutdown. But it also seems to be caused by bugs in cardbus | |
158 | * bridge shutdown: shutting down the bridge before the devices using it. | |
159 | */ | |
2f3a6b86 MG |
160 | int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr, |
161 | u32 mask, u32 done, int usec) | |
1da177e4 LT |
162 | { |
163 | u32 result; | |
164 | ||
165 | do { | |
083522d7 | 166 | result = ehci_readl(ehci, ptr); |
1da177e4 LT |
167 | if (result == ~(u32)0) /* card removed */ |
168 | return -ENODEV; | |
169 | result &= mask; | |
170 | if (result == done) | |
171 | return 0; | |
172 | udelay (1); | |
173 | usec--; | |
174 | } while (usec > 0); | |
175 | return -ETIMEDOUT; | |
176 | } | |
2f3a6b86 | 177 | EXPORT_SYMBOL_GPL(ehci_handshake); |
1da177e4 | 178 | |
65fd4272 MC |
179 | /* check TDI/ARC silicon is in host mode */ |
180 | static int tdi_in_host_mode (struct ehci_hcd *ehci) | |
181 | { | |
65fd4272 MC |
182 | u32 tmp; |
183 | ||
a46af4eb | 184 | tmp = ehci_readl(ehci, &ehci->regs->usbmode); |
65fd4272 MC |
185 | return (tmp & 3) == USBMODE_CM_HC; |
186 | } | |
187 | ||
c4f34764 AS |
188 | /* |
189 | * Force HC to halt state from unknown (EHCI spec section 2.3). | |
190 | * Must be called with interrupts enabled and the lock not held. | |
191 | */ | |
1da177e4 LT |
192 | static int ehci_halt (struct ehci_hcd *ehci) |
193 | { | |
c4f34764 AS |
194 | u32 temp; |
195 | ||
196 | spin_lock_irq(&ehci->lock); | |
1da177e4 | 197 | |
72f30b6f | 198 | /* disable any irqs left enabled by previous code */ |
083522d7 | 199 | ehci_writel(ehci, 0, &ehci->regs->intr_enable); |
72f30b6f | 200 | |
c4f34764 AS |
201 | if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) { |
202 | spin_unlock_irq(&ehci->lock); | |
65fd4272 MC |
203 | return 0; |
204 | } | |
205 | ||
3d9545cc AS |
206 | /* |
207 | * This routine gets called during probe before ehci->command | |
208 | * has been initialized, so we can't rely on its value. | |
209 | */ | |
210 | ehci->command &= ~CMD_RUN; | |
083522d7 | 211 | temp = ehci_readl(ehci, &ehci->regs->command); |
3d9545cc | 212 | temp &= ~(CMD_RUN | CMD_IAAD); |
083522d7 | 213 | ehci_writel(ehci, temp, &ehci->regs->command); |
df7c1ca2 | 214 | |
c4f34764 AS |
215 | spin_unlock_irq(&ehci->lock); |
216 | synchronize_irq(ehci_to_hcd(ehci)->irq); | |
0bcfeb3e | 217 | |
2f3a6b86 | 218 | return ehci_handshake(ehci, &ehci->regs->status, |
083522d7 | 219 | STS_HALT, STS_HALT, 16 * 125); |
0bcfeb3e DB |
220 | } |
221 | ||
1da177e4 LT |
222 | /* put TDI/ARC silicon into EHCI mode */ |
223 | static void tdi_reset (struct ehci_hcd *ehci) | |
224 | { | |
1da177e4 LT |
225 | u32 tmp; |
226 | ||
a46af4eb | 227 | tmp = ehci_readl(ehci, &ehci->regs->usbmode); |
d23a1377 VB |
228 | tmp |= USBMODE_CM_HC; |
229 | /* The default byte access to MMR space is LE after | |
230 | * controller reset. Set the required endian mode | |
231 | * for transfer buffers to match the host microprocessor | |
232 | */ | |
233 | if (ehci_big_endian_mmio(ehci)) | |
234 | tmp |= USBMODE_BE; | |
a46af4eb | 235 | ehci_writel(ehci, tmp, &ehci->regs->usbmode); |
1da177e4 LT |
236 | } |
237 | ||
c4f34764 AS |
238 | /* |
239 | * Reset a non-running (STS_HALT == 1) controller. | |
240 | * Must be called with interrupts enabled and the lock not held. | |
241 | */ | |
74db22cb | 242 | int ehci_reset(struct ehci_hcd *ehci) |
1da177e4 LT |
243 | { |
244 | int retval; | |
083522d7 | 245 | u32 command = ehci_readl(ehci, &ehci->regs->command); |
1da177e4 | 246 | |
8d053c79 JW |
247 | /* If the EHCI debug controller is active, special care must be |
248 | * taken before and after a host controller reset */ | |
9fa5780b | 249 | if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci))) |
8d053c79 JW |
250 | ehci->debug = NULL; |
251 | ||
1da177e4 LT |
252 | command |= CMD_RESET; |
253 | dbg_cmd (ehci, "reset", command); | |
083522d7 | 254 | ehci_writel(ehci, command, &ehci->regs->command); |
e8799906 | 255 | ehci->rh_state = EHCI_RH_HALTED; |
1da177e4 | 256 | ehci->next_statechange = jiffies; |
2f3a6b86 | 257 | retval = ehci_handshake(ehci, &ehci->regs->command, |
083522d7 | 258 | CMD_RESET, 0, 250 * 1000); |
1da177e4 | 259 | |
331ac6b2 AD |
260 | if (ehci->has_hostpc) { |
261 | ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS, | |
a46af4eb AS |
262 | &ehci->regs->usbmode_ex); |
263 | ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning); | |
331ac6b2 | 264 | } |
1da177e4 LT |
265 | if (retval) |
266 | return retval; | |
267 | ||
268 | if (ehci_is_TDI(ehci)) | |
269 | tdi_reset (ehci); | |
270 | ||
8d053c79 | 271 | if (ehci->debug) |
9fa5780b | 272 | dbgp_external_startup(ehci_to_hcd(ehci)); |
8d053c79 | 273 | |
a448e4dc AS |
274 | ehci->port_c_suspend = ehci->suspended_ports = |
275 | ehci->resuming_ports = 0; | |
1da177e4 LT |
276 | return retval; |
277 | } | |
74db22cb | 278 | EXPORT_SYMBOL_GPL(ehci_reset); |
1da177e4 | 279 | |
c4f34764 AS |
280 | /* |
281 | * Idle the controller (turn off the schedules). | |
282 | * Must be called with interrupts enabled and the lock not held. | |
283 | */ | |
1da177e4 LT |
284 | static void ehci_quiesce (struct ehci_hcd *ehci) |
285 | { | |
286 | u32 temp; | |
287 | ||
e8799906 | 288 | if (ehci->rh_state != EHCI_RH_RUNNING) |
c0c53dbc | 289 | return; |
1da177e4 LT |
290 | |
291 | /* wait for any schedule enables/disables to take effect */ | |
3d9545cc | 292 | temp = (ehci->command << 10) & (STS_ASS | STS_PSS); |
2f3a6b86 MG |
293 | ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, |
294 | 16 * 125); | |
1da177e4 LT |
295 | |
296 | /* then disable anything that's still active */ | |
c4f34764 | 297 | spin_lock_irq(&ehci->lock); |
3d9545cc AS |
298 | ehci->command &= ~(CMD_ASE | CMD_PSE); |
299 | ehci_writel(ehci, ehci->command, &ehci->regs->command); | |
c4f34764 | 300 | spin_unlock_irq(&ehci->lock); |
1da177e4 LT |
301 | |
302 | /* hardware can take 16 microframes to turn off ... */ | |
2f3a6b86 MG |
303 | ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0, |
304 | 16 * 125); | |
1da177e4 LT |
305 | } |
306 | ||
307 | /*-------------------------------------------------------------------------*/ | |
308 | ||
f96fba0d | 309 | static void end_iaa_cycle(struct ehci_hcd *ehci); |
07d29b63 | 310 | static void end_unlink_async(struct ehci_hcd *ehci); |
32830f20 | 311 | static void unlink_empty_async(struct ehci_hcd *ehci); |
7d12e780 | 312 | static void ehci_work(struct ehci_hcd *ehci); |
df202255 AS |
313 | static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); |
314 | static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); | |
11a7e594 | 315 | static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable); |
1da177e4 | 316 | |
d58b4bcc | 317 | #include "ehci-timer.c" |
1da177e4 LT |
318 | #include "ehci-hub.c" |
319 | #include "ehci-mem.c" | |
320 | #include "ehci-q.c" | |
321 | #include "ehci-sched.c" | |
4c67045b | 322 | #include "ehci-sysfs.c" |
1da177e4 LT |
323 | |
324 | /*-------------------------------------------------------------------------*/ | |
325 | ||
8903795a AS |
326 | /* On some systems, leaving remote wakeup enabled prevents system shutdown. |
327 | * The firmware seems to think that powering off is a wakeup event! | |
328 | * This routine turns off remote wakeup and everything else, on all ports. | |
329 | */ | |
330 | static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) | |
331 | { | |
332 | int port = HCS_N_PORTS(ehci->hcs_params); | |
333 | ||
11a7e594 | 334 | while (port--) { |
8903795a AS |
335 | ehci_writel(ehci, PORT_RWC_BITS, |
336 | &ehci->regs->port_status[port]); | |
11a7e594 MG |
337 | spin_unlock_irq(&ehci->lock); |
338 | ehci_port_power(ehci, port, false); | |
339 | spin_lock_irq(&ehci->lock); | |
340 | } | |
8903795a AS |
341 | } |
342 | ||
21da84a8 SS |
343 | /* |
344 | * Halt HC, turn off all ports, and let the BIOS use the companion controllers. | |
c4f34764 | 345 | * Must be called with interrupts enabled and the lock not held. |
72f30b6f | 346 | */ |
21da84a8 | 347 | static void ehci_silence_controller(struct ehci_hcd *ehci) |
1da177e4 | 348 | { |
21da84a8 | 349 | ehci_halt(ehci); |
c4f34764 AS |
350 | |
351 | spin_lock_irq(&ehci->lock); | |
352 | ehci->rh_state = EHCI_RH_HALTED; | |
8903795a | 353 | ehci_turn_off_all_ports(ehci); |
1da177e4 LT |
354 | |
355 | /* make BIOS/etc use companion controller during reboot */ | |
083522d7 | 356 | ehci_writel(ehci, 0, &ehci->regs->configured_flag); |
8903795a AS |
357 | |
358 | /* unblock posted writes */ | |
359 | ehci_readl(ehci, &ehci->regs->configured_flag); | |
c4f34764 | 360 | spin_unlock_irq(&ehci->lock); |
1da177e4 LT |
361 | } |
362 | ||
21da84a8 SS |
363 | /* ehci_shutdown kick in for silicon on any bus (not just pci, etc). |
364 | * This forcibly disables dma and IRQs, helping kexec and other cases | |
365 | * where the next system software may expect clean state. | |
366 | */ | |
367 | static void ehci_shutdown(struct usb_hcd *hcd) | |
368 | { | |
369 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
370 | ||
11c011a5 SK |
371 | /** |
372 | * Protect the system from crashing at system shutdown in cases where | |
373 | * usb host is not added yet from OTG controller driver. | |
374 | * As ehci_setup() not done yet, so stop accessing registers or | |
375 | * variables initialized in ehci_setup() | |
376 | */ | |
377 | if (!ehci->sbrn) | |
378 | return; | |
379 | ||
21da84a8 | 380 | spin_lock_irq(&ehci->lock); |
43fe3a99 | 381 | ehci->shutdown = true; |
c0c53dbc | 382 | ehci->rh_state = EHCI_RH_STOPPING; |
d58b4bcc | 383 | ehci->enabled_hrtimer_events = 0; |
21da84a8 | 384 | spin_unlock_irq(&ehci->lock); |
d58b4bcc | 385 | |
c4f34764 AS |
386 | ehci_silence_controller(ehci); |
387 | ||
d58b4bcc | 388 | hrtimer_cancel(&ehci->hrtimer); |
21da84a8 SS |
389 | } |
390 | ||
7ff71d6a | 391 | /*-------------------------------------------------------------------------*/ |
1da177e4 | 392 | |
7ff71d6a MP |
393 | /* |
394 | * ehci_work is called from some interrupts, timers, and so on. | |
395 | * it calls driver completion functions, after dropping ehci->lock. | |
396 | */ | |
7d12e780 | 397 | static void ehci_work (struct ehci_hcd *ehci) |
7ff71d6a | 398 | { |
7ff71d6a MP |
399 | /* another CPU may drop ehci->lock during a schedule scan while |
400 | * it reports urb completions. this flag guards against bogus | |
401 | * attempts at re-entrant schedule scanning. | |
402 | */ | |
361aabf3 AS |
403 | if (ehci->scanning) { |
404 | ehci->need_rescan = true; | |
7ff71d6a | 405 | return; |
361aabf3 AS |
406 | } |
407 | ehci->scanning = true; | |
408 | ||
409 | rescan: | |
410 | ehci->need_rescan = false; | |
31446610 AS |
411 | if (ehci->async_count) |
412 | scan_async(ehci); | |
569b394f AS |
413 | if (ehci->intr_count > 0) |
414 | scan_intr(ehci); | |
415 | if (ehci->isoc_count > 0) | |
416 | scan_isoc(ehci); | |
361aabf3 AS |
417 | if (ehci->need_rescan) |
418 | goto rescan; | |
419 | ehci->scanning = false; | |
7ff71d6a MP |
420 | |
421 | /* the IO watchdog guards against hardware or driver bugs that | |
422 | * misplace IRQs, and should let us run completely without IRQs. | |
423 | * such lossage has been observed on both VT6202 and VT8235. | |
424 | */ | |
18aafe64 | 425 | turn_on_io_watchdog(ehci); |
7ff71d6a | 426 | } |
1da177e4 | 427 | |
21da84a8 SS |
428 | /* |
429 | * Called when the ehci_hcd module is removed. | |
430 | */ | |
7ff71d6a | 431 | static void ehci_stop (struct usb_hcd *hcd) |
1da177e4 LT |
432 | { |
433 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
1da177e4 | 434 | |
7ff71d6a | 435 | ehci_dbg (ehci, "stop\n"); |
1da177e4 | 436 | |
7ff71d6a | 437 | /* no more interrupts ... */ |
56c1e26d | 438 | |
7ff71d6a | 439 | spin_lock_irq(&ehci->lock); |
d58b4bcc | 440 | ehci->enabled_hrtimer_events = 0; |
c4f34764 | 441 | spin_unlock_irq(&ehci->lock); |
1da177e4 | 442 | |
c4f34764 | 443 | ehci_quiesce(ehci); |
21da84a8 | 444 | ehci_silence_controller(ehci); |
7ff71d6a | 445 | ehci_reset (ehci); |
1da177e4 | 446 | |
d58b4bcc | 447 | hrtimer_cancel(&ehci->hrtimer); |
4c67045b | 448 | remove_sysfs_files(ehci); |
7ff71d6a | 449 | remove_debug_files (ehci); |
1da177e4 | 450 | |
7ff71d6a MP |
451 | /* root hub is shut down separately (first, when possible) */ |
452 | spin_lock_irq (&ehci->lock); | |
55934eb3 | 453 | end_free_itds(ehci); |
7ff71d6a MP |
454 | spin_unlock_irq (&ehci->lock); |
455 | ehci_mem_cleanup (ehci); | |
1da177e4 | 456 | |
ad93562b AX |
457 | if (ehci->amd_pll_fix == 1) |
458 | usb_amd_dev_put(); | |
05570297 | 459 | |
083522d7 BH |
460 | dbg_status (ehci, "ehci_stop completed", |
461 | ehci_readl(ehci, &ehci->regs->status)); | |
1da177e4 LT |
462 | } |
463 | ||
18807521 DB |
464 | /* one-time init, only for memory state */ |
465 | static int ehci_init(struct usb_hcd *hcd) | |
1da177e4 | 466 | { |
18807521 | 467 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
1da177e4 | 468 | u32 temp; |
1da177e4 LT |
469 | int retval; |
470 | u32 hcc_params; | |
3807e26d | 471 | struct ehci_qh_hw *hw; |
18807521 DB |
472 | |
473 | spin_lock_init(&ehci->lock); | |
474 | ||
403dbd36 AD |
475 | /* |
476 | * keep io watchdog by default, those good HCDs could turn off it later | |
477 | */ | |
478 | ehci->need_io_watchdog = 1; | |
1da177e4 | 479 | |
d58b4bcc AS |
480 | hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); |
481 | ehci->hrtimer.function = ehci_hrtimer_func; | |
482 | ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT; | |
07d29b63 | 483 | |
f75593ce AS |
484 | hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); |
485 | ||
cc62a7eb KS |
486 | /* |
487 | * by default set standard 80% (== 100 usec/uframe) max periodic | |
488 | * bandwidth as required by USB 2.0 | |
489 | */ | |
490 | ehci->uframe_periodic_max = 100; | |
491 | ||
1da177e4 LT |
492 | /* |
493 | * hw default: 1K periodic list heads, one per frame. | |
494 | * periodic_size can shrink by USBCMD update if hcc_params allows. | |
495 | */ | |
496 | ehci->periodic_size = DEFAULT_I_TDPS; | |
6e018751 | 497 | INIT_LIST_HEAD(&ehci->async_unlink); |
214ac7a0 | 498 | INIT_LIST_HEAD(&ehci->async_idle); |
9118f9eb | 499 | INIT_LIST_HEAD(&ehci->intr_unlink_wait); |
6e018751 | 500 | INIT_LIST_HEAD(&ehci->intr_unlink); |
569b394f | 501 | INIT_LIST_HEAD(&ehci->intr_qh_list); |
9aa09d2f | 502 | INIT_LIST_HEAD(&ehci->cached_itd_list); |
0e5f231b | 503 | INIT_LIST_HEAD(&ehci->cached_sitd_list); |
b35c5009 | 504 | INIT_LIST_HEAD(&ehci->tt_list); |
f75593ce | 505 | |
8e192910 | 506 | if (HCC_PGM_FRAMELISTLEN(hcc_params)) { |
f75593ce AS |
507 | /* periodic schedule size can be smaller than default */ |
508 | switch (EHCI_TUNE_FLS) { | |
509 | case 0: ehci->periodic_size = 1024; break; | |
510 | case 1: ehci->periodic_size = 512; break; | |
511 | case 2: ehci->periodic_size = 256; break; | |
512 | default: BUG(); | |
513 | } | |
514 | } | |
18807521 | 515 | if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) |
1da177e4 LT |
516 | return retval; |
517 | ||
518 | /* controllers may cache some of the periodic schedule ... */ | |
53bd6a60 | 519 | if (HCC_ISOC_CACHE(hcc_params)) // full frame cache |
98cae42d | 520 | ehci->i_thresh = 0; |
1da177e4 | 521 | else // N microframes cached |
18807521 | 522 | ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); |
1da177e4 | 523 | |
1da177e4 LT |
524 | /* |
525 | * dedicate a qh for the async ring head, since we couldn't unlink | |
526 | * a 'real' qh without stopping the async schedule [4.8]. use it | |
527 | * as the 'reclamation list head' too. | |
528 | * its dummy is used in hw_alt_next of many tds, to prevent the qh | |
529 | * from automatically advancing to the next td after short reads. | |
530 | */ | |
18807521 | 531 | ehci->async->qh_next.qh = NULL; |
3807e26d AD |
532 | hw = ehci->async->hw; |
533 | hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); | |
534 | hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); | |
4f7a67e2 | 535 | #if defined(CONFIG_PPC_PS3) |
4c53de72 | 536 | hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE); |
4f7a67e2 | 537 | #endif |
3807e26d AD |
538 | hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); |
539 | hw->hw_qtd_next = EHCI_LIST_END(ehci); | |
18807521 | 540 | ehci->async->qh_state = QH_STATE_LINKED; |
3807e26d | 541 | hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma); |
1da177e4 LT |
542 | |
543 | /* clear interrupt enables, set irq latency */ | |
544 | if (log2_irq_thresh < 0 || log2_irq_thresh > 6) | |
545 | log2_irq_thresh = 0; | |
546 | temp = 1 << (16 + log2_irq_thresh); | |
5a9cdf33 AD |
547 | if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) { |
548 | ehci->has_ppcd = 1; | |
549 | ehci_dbg(ehci, "enable per-port change event\n"); | |
550 | temp |= CMD_PPCEE; | |
551 | } | |
1da177e4 LT |
552 | if (HCC_CANPARK(hcc_params)) { |
553 | /* HW default park == 3, on hardware that supports it (like | |
554 | * NVidia and ALI silicon), maximizes throughput on the async | |
555 | * schedule by avoiding QH fetches between transfers. | |
556 | * | |
557 | * With fast usb storage devices and NForce2, "park" seems to | |
558 | * make problems: throughput reduction (!), data errors... | |
559 | */ | |
560 | if (park) { | |
18807521 | 561 | park = min(park, (unsigned) 3); |
1da177e4 LT |
562 | temp |= CMD_PARK; |
563 | temp |= park << 8; | |
564 | } | |
18807521 | 565 | ehci_dbg(ehci, "park %d\n", park); |
1da177e4 | 566 | } |
18807521 | 567 | if (HCC_PGM_FRAMELISTLEN(hcc_params)) { |
1da177e4 LT |
568 | /* periodic schedule size can be smaller than default */ |
569 | temp &= ~(3 << 2); | |
570 | temp |= (EHCI_TUNE_FLS << 2); | |
1da177e4 | 571 | } |
18807521 DB |
572 | ehci->command = temp; |
573 | ||
40f8db8f | 574 | /* Accept arbitrarily long scatter-gather lists */ |
4307a28e AR |
575 | if (!(hcd->driver->flags & HCD_LOCAL_MEM)) |
576 | hcd->self.sg_tablesize = ~0; | |
87d61912 AS |
577 | |
578 | /* Prepare for unlinking active QHs */ | |
579 | ehci->old_current = ~0; | |
18807521 DB |
580 | return 0; |
581 | } | |
582 | ||
583 | /* start HC running; it's halted, ehci_init() has been run (once) */ | |
584 | static int ehci_run (struct usb_hcd *hcd) | |
585 | { | |
586 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
18807521 DB |
587 | u32 temp; |
588 | u32 hcc_params; | |
589 | ||
1d619f12 | 590 | hcd->uses_new_polling = 1; |
1d619f12 | 591 | |
18807521 | 592 | /* EHCI spec section 4.1 */ |
876e0df9 | 593 | |
083522d7 BH |
594 | ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); |
595 | ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); | |
18807521 DB |
596 | |
597 | /* | |
598 | * hcc_params controls whether ehci->regs->segment must (!!!) | |
599 | * be used; it constrains QH/ITD/SITD and QTD locations. | |
600 | * pci_pool consistent memory always uses segment zero. | |
601 | * streaming mappings for I/O buffers, like pci_map_single(), | |
602 | * can return segments above 4GB, if the device allows. | |
603 | * | |
0e77acef | 604 | * NOTE: the dma mask is visible through dev->dma_mask, so |
18807521 DB |
605 | * drivers can pass this info along ... like NETIF_F_HIGHDMA, |
606 | * Scsi_Host.highmem_io, and so forth. It's readonly to all | |
607 | * host side drivers though. | |
608 | */ | |
083522d7 | 609 | hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); |
18807521 | 610 | if (HCC_64BIT_ADDR(hcc_params)) { |
083522d7 | 611 | ehci_writel(ehci, 0, &ehci->regs->segment); |
18807521 DB |
612 | #if 0 |
613 | // this is deeply broken on almost all architectures | |
6a35528a | 614 | if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64))) |
18807521 DB |
615 | ehci_info(ehci, "enabled 64bit DMA\n"); |
616 | #endif | |
617 | } | |
618 | ||
619 | ||
1da177e4 LT |
620 | // Philips, Intel, and maybe others need CMD_RUN before the |
621 | // root hub will detect new devices (why?); NEC doesn't | |
18807521 DB |
622 | ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); |
623 | ehci->command |= CMD_RUN; | |
083522d7 | 624 | ehci_writel(ehci, ehci->command, &ehci->regs->command); |
18807521 | 625 | dbg_cmd (ehci, "init", ehci->command); |
1da177e4 | 626 | |
1da177e4 LT |
627 | /* |
628 | * Start, enabling full USB 2.0 functionality ... usb 1.1 devices | |
629 | * are explicitly handed to companion controller(s), so no TT is | |
630 | * involved with the root hub. (Except where one is integrated, | |
631 | * and there's no companion controller unless maybe for USB OTG.) | |
32fe0198 AS |
632 | * |
633 | * Turning on the CF flag will transfer ownership of all ports | |
634 | * from the companions to the EHCI controller. If any of the | |
635 | * companions are in the middle of a port reset at the time, it | |
636 | * could cause trouble. Write-locking ehci_cf_port_reset_rwsem | |
1cb52658 DB |
637 | * guarantees that no resets are in progress. After we set CF, |
638 | * a short delay lets the hardware catch up; new resets shouldn't | |
639 | * be started before the port switching actions could complete. | |
1da177e4 | 640 | */ |
32fe0198 | 641 | down_write(&ehci_cf_port_reset_rwsem); |
e8799906 | 642 | ehci->rh_state = EHCI_RH_RUNNING; |
083522d7 BH |
643 | ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); |
644 | ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ | |
1cb52658 | 645 | msleep(5); |
32fe0198 | 646 | up_write(&ehci_cf_port_reset_rwsem); |
ee4ecb8a | 647 | ehci->last_periodic_enable = ktime_get_real(); |
1da177e4 | 648 | |
c430131a | 649 | temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); |
1da177e4 | 650 | ehci_info (ehci, |
2b70f073 | 651 | "USB %x.%x started, EHCI %x.%02x%s\n", |
7ff71d6a | 652 | ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), |
2b70f073 | 653 | temp >> 8, temp & 0xff, |
93f1a47c | 654 | ignore_oc ? ", overcurrent ignored" : ""); |
1da177e4 | 655 | |
083522d7 BH |
656 | ehci_writel(ehci, INTR_MASK, |
657 | &ehci->regs->intr_enable); /* Turn On Interrupts */ | |
1da177e4 | 658 | |
18807521 DB |
659 | /* GRR this is run-once init(), being done every time the HC starts. |
660 | * So long as they're part of class devices, we can't do it init() | |
661 | * since the class device isn't created that early. | |
662 | */ | |
663 | create_debug_files(ehci); | |
4c67045b | 664 | create_sysfs_files(ehci); |
1da177e4 LT |
665 | |
666 | return 0; | |
667 | } | |
668 | ||
3e023203 | 669 | int ehci_setup(struct usb_hcd *hcd) |
2093c6b4 MC |
670 | { |
671 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
672 | int retval; | |
673 | ||
674 | ehci->regs = (void __iomem *)ehci->caps + | |
675 | HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); | |
676 | dbg_hcs_params(ehci, "reset"); | |
677 | dbg_hcc_params(ehci, "reset"); | |
678 | ||
679 | /* cache this readonly data; minimize chip reads */ | |
680 | ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); | |
681 | ||
682 | ehci->sbrn = HCD_USB2; | |
683 | ||
631fe9d9 AS |
684 | /* data structure init */ |
685 | retval = ehci_init(hcd); | |
2093c6b4 MC |
686 | if (retval) |
687 | return retval; | |
688 | ||
631fe9d9 | 689 | retval = ehci_halt(ehci); |
d8ff463a JJB |
690 | if (retval) { |
691 | ehci_mem_cleanup(ehci); | |
2093c6b4 | 692 | return retval; |
d8ff463a | 693 | } |
2093c6b4 MC |
694 | |
695 | ehci_reset(ehci); | |
696 | ||
697 | return 0; | |
698 | } | |
3e023203 | 699 | EXPORT_SYMBOL_GPL(ehci_setup); |
2093c6b4 | 700 | |
1da177e4 LT |
701 | /*-------------------------------------------------------------------------*/ |
702 | ||
7d12e780 | 703 | static irqreturn_t ehci_irq (struct usb_hcd *hcd) |
1da177e4 LT |
704 | { |
705 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
67b2e029 | 706 | u32 status, masked_status, pcd_status = 0, cmd; |
1da177e4 | 707 | int bh; |
a1227f3c | 708 | unsigned long flags; |
1da177e4 | 709 | |
a1227f3c SG |
710 | /* |
711 | * For threadirqs option we use spin_lock_irqsave() variant to prevent | |
712 | * deadlock with ehci hrtimer callback, because hrtimer callbacks run | |
713 | * in interrupt context even when threadirqs is specified. We can go | |
714 | * back to spin_lock() variant when hrtimer callbacks become threaded. | |
715 | */ | |
716 | spin_lock_irqsave(&ehci->lock, flags); | |
1da177e4 | 717 | |
083522d7 | 718 | status = ehci_readl(ehci, &ehci->regs->status); |
1da177e4 LT |
719 | |
720 | /* e.g. cardbus physical eject */ | |
721 | if (status == ~(u32) 0) { | |
722 | ehci_dbg (ehci, "device removed\n"); | |
723 | goto dead; | |
724 | } | |
725 | ||
2fbe2bf1 AS |
726 | /* |
727 | * We don't use STS_FLR, but some controllers don't like it to | |
728 | * remain on, so mask it out along with the other status bits. | |
729 | */ | |
730 | masked_status = status & (INTR_MASK | STS_FLR); | |
731 | ||
69fff59d | 732 | /* Shared IRQ? */ |
e8799906 | 733 | if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { |
a1227f3c | 734 | spin_unlock_irqrestore(&ehci->lock, flags); |
1da177e4 LT |
735 | return IRQ_NONE; |
736 | } | |
737 | ||
738 | /* clear (just) interrupts */ | |
67b2e029 | 739 | ehci_writel(ehci, masked_status, &ehci->regs->status); |
e82cc128 | 740 | cmd = ehci_readl(ehci, &ehci->regs->command); |
1da177e4 LT |
741 | bh = 0; |
742 | ||
1da177e4 LT |
743 | /* normal [4.15.1.2] or error [4.15.1.1] completion */ |
744 | if (likely ((status & (STS_INT|STS_ERR)) != 0)) { | |
745 | if (likely ((status & STS_ERR) == 0)) | |
746 | COUNT (ehci->stats.normal); | |
747 | else | |
748 | COUNT (ehci->stats.error); | |
749 | bh = 1; | |
750 | } | |
751 | ||
752 | /* complete the unlinking of some qh [4.15.2.3] */ | |
753 | if (status & STS_IAA) { | |
9d938747 AS |
754 | |
755 | /* Turn off the IAA watchdog */ | |
756 | ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG); | |
757 | ||
758 | /* | |
759 | * Mild optimization: Allow another IAAD to reset the | |
760 | * hrtimer, if one occurs before the next expiration. | |
761 | * In theory we could always cancel the hrtimer, but | |
762 | * tests show that about half the time it will be reset | |
763 | * for some other event anyway. | |
764 | */ | |
765 | if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG) | |
766 | ++ehci->next_hrtimer_event; | |
767 | ||
e82cc128 | 768 | /* guard against (alleged) silicon errata */ |
6feff1b9 | 769 | if (cmd & CMD_IAAD) |
e82cc128 | 770 | ehci_dbg(ehci, "IAA with IAAD still set?\n"); |
214ac7a0 | 771 | if (ehci->iaa_in_progress) |
99ac5b1e | 772 | COUNT(ehci->stats.iaa); |
f96fba0d | 773 | end_iaa_cycle(ehci); |
1da177e4 LT |
774 | } |
775 | ||
776 | /* remote wakeup [4.3.1] */ | |
d97cc2f2 | 777 | if (status & STS_PCD) { |
1da177e4 | 778 | unsigned i = HCS_N_PORTS (ehci->hcs_params); |
4dd405a4 | 779 | u32 ppcd = ~0; |
d1b1842c DB |
780 | |
781 | /* kick root hub later */ | |
1d619f12 | 782 | pcd_status = status; |
1da177e4 LT |
783 | |
784 | /* resume root hub? */ | |
dc75ce9d | 785 | if (ehci->rh_state == EHCI_RH_SUSPENDED) |
8c03356a | 786 | usb_hcd_resume_root_hub(hcd); |
1da177e4 | 787 | |
5a9cdf33 AD |
788 | /* get per-port change detect bits */ |
789 | if (ehci->has_ppcd) | |
790 | ppcd = status >> 16; | |
791 | ||
1da177e4 | 792 | while (i--) { |
5a9cdf33 AD |
793 | int pstatus; |
794 | ||
795 | /* leverage per-port change bits feature */ | |
4dd405a4 | 796 | if (!(ppcd & (1 << i))) |
5a9cdf33 AD |
797 | continue; |
798 | pstatus = ehci_readl(ehci, | |
799 | &ehci->regs->port_status[i]); | |
b972b68c DB |
800 | |
801 | if (pstatus & PORT_OWNER) | |
1da177e4 | 802 | continue; |
eafe5b99 AS |
803 | if (!(test_bit(i, &ehci->suspended_ports) && |
804 | ((pstatus & PORT_RESUME) || | |
805 | !(pstatus & PORT_SUSPEND)) && | |
806 | (pstatus & PORT_PE) && | |
807 | ehci->reset_done[i] == 0)) | |
1da177e4 LT |
808 | continue; |
809 | ||
ea16328f FB |
810 | /* start USB_RESUME_TIMEOUT msec resume signaling from |
811 | * this port, and make hub_wq collect | |
812 | * PORT_STAT_C_SUSPEND to stop that signaling. | |
1da177e4 | 813 | */ |
ea16328f FB |
814 | ehci->reset_done[i] = jiffies + |
815 | msecs_to_jiffies(USB_RESUME_TIMEOUT); | |
a448e4dc | 816 | set_bit(i, &ehci->resuming_ports); |
1da177e4 | 817 | ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); |
f292e7f9 | 818 | usb_hcd_start_port_resume(&hcd->self, i); |
61e8b858 | 819 | mod_timer(&hcd->rh_timer, ehci->reset_done[i]); |
1da177e4 LT |
820 | } |
821 | } | |
822 | ||
823 | /* PCI errors [4.15.2.4] */ | |
824 | if (unlikely ((status & STS_FATAL) != 0)) { | |
67b2e029 | 825 | ehci_err(ehci, "fatal error\n"); |
eafe5b99 AS |
826 | dbg_cmd(ehci, "fatal", cmd); |
827 | dbg_status(ehci, "fatal", status); | |
1da177e4 | 828 | dead: |
69fff59d | 829 | usb_hc_died(hcd); |
bf6387bc AS |
830 | |
831 | /* Don't let the controller do anything more */ | |
43fe3a99 | 832 | ehci->shutdown = true; |
bf6387bc AS |
833 | ehci->rh_state = EHCI_RH_STOPPING; |
834 | ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE); | |
835 | ehci_writel(ehci, ehci->command, &ehci->regs->command); | |
836 | ehci_writel(ehci, 0, &ehci->regs->intr_enable); | |
837 | ehci_handle_controller_death(ehci); | |
838 | ||
839 | /* Handle completions when the controller stops */ | |
840 | bh = 0; | |
1da177e4 LT |
841 | } |
842 | ||
843 | if (bh) | |
7d12e780 | 844 | ehci_work (ehci); |
a1227f3c | 845 | spin_unlock_irqrestore(&ehci->lock, flags); |
d1b1842c | 846 | if (pcd_status) |
1d619f12 | 847 | usb_hcd_poll_rh_status(hcd); |
1da177e4 LT |
848 | return IRQ_HANDLED; |
849 | } | |
850 | ||
851 | /*-------------------------------------------------------------------------*/ | |
852 | ||
853 | /* | |
854 | * non-error returns are a promise to giveback() the urb later | |
855 | * we drop ownership so next owner (or urb unlink) can get it | |
856 | * | |
857 | * urb + dev is in hcd.self.controller.urb_list | |
858 | * we're queueing TDs onto software and hardware lists | |
859 | * | |
860 | * hcd-specific init for hcpriv hasn't been done yet | |
861 | * | |
862 | * NOTE: control, bulk, and interrupt share the same code to append TDs | |
863 | * to a (possibly active) QH, and the same QH scanning code. | |
864 | */ | |
865 | static int ehci_urb_enqueue ( | |
866 | struct usb_hcd *hcd, | |
1da177e4 | 867 | struct urb *urb, |
55016f10 | 868 | gfp_t mem_flags |
1da177e4 LT |
869 | ) { |
870 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
871 | struct list_head qtd_list; | |
872 | ||
873 | INIT_LIST_HEAD (&qtd_list); | |
874 | ||
875 | switch (usb_pipetype (urb->pipe)) { | |
25b70a86 DB |
876 | case PIPE_CONTROL: |
877 | /* qh_completions() code doesn't handle all the fault cases | |
878 | * in multi-TD control transfers. Even 1KB is rare anyway. | |
879 | */ | |
880 | if (urb->transfer_buffer_length > (16 * 1024)) | |
881 | return -EMSGSIZE; | |
882 | /* FALLTHROUGH */ | |
883 | /* case PIPE_BULK: */ | |
1da177e4 LT |
884 | default: |
885 | if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags)) | |
886 | return -ENOMEM; | |
e9df41c5 | 887 | return submit_async(ehci, urb, &qtd_list, mem_flags); |
1da177e4 LT |
888 | |
889 | case PIPE_INTERRUPT: | |
890 | if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags)) | |
891 | return -ENOMEM; | |
e9df41c5 | 892 | return intr_submit(ehci, urb, &qtd_list, mem_flags); |
1da177e4 LT |
893 | |
894 | case PIPE_ISOCHRONOUS: | |
895 | if (urb->dev->speed == USB_SPEED_HIGH) | |
896 | return itd_submit (ehci, urb, mem_flags); | |
897 | else | |
898 | return sitd_submit (ehci, urb, mem_flags); | |
899 | } | |
900 | } | |
901 | ||
1da177e4 LT |
902 | /* remove from hardware lists |
903 | * completions normally happen asynchronously | |
904 | */ | |
905 | ||
e9df41c5 | 906 | static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) |
1da177e4 LT |
907 | { |
908 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
909 | struct ehci_qh *qh; | |
910 | unsigned long flags; | |
e9df41c5 | 911 | int rc; |
1da177e4 LT |
912 | |
913 | spin_lock_irqsave (&ehci->lock, flags); | |
e9df41c5 AS |
914 | rc = usb_hcd_check_unlink_urb(hcd, urb, status); |
915 | if (rc) | |
916 | goto done; | |
917 | ||
7655e316 AS |
918 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { |
919 | /* | |
920 | * We don't expedite dequeue for isochronous URBs. | |
921 | * Just wait until they complete normally or their | |
922 | * time slot expires. | |
923 | */ | |
924 | } else { | |
1da177e4 | 925 | qh = (struct ehci_qh *) urb->hcpriv; |
fcc5184e | 926 | qh->unlink_reason |= QH_UNLINK_REQUESTED; |
07d29b63 AS |
927 | switch (qh->qh_state) { |
928 | case QH_STATE_LINKED: | |
7655e316 AS |
929 | if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) |
930 | start_unlink_intr(ehci, qh); | |
931 | else | |
932 | start_unlink_async(ehci, qh); | |
07d29b63 | 933 | break; |
7bc782d7 AS |
934 | case QH_STATE_COMPLETING: |
935 | qh->dequeue_during_giveback = 1; | |
936 | break; | |
07d29b63 AS |
937 | case QH_STATE_UNLINK: |
938 | case QH_STATE_UNLINK_WAIT: | |
939 | /* already started */ | |
940 | break; | |
941 | case QH_STATE_IDLE: | |
7a0f0d95 AS |
942 | /* QH might be waiting for a Clear-TT-Buffer */ |
943 | qh_completions(ehci, qh); | |
07d29b63 AS |
944 | break; |
945 | } | |
1da177e4 LT |
946 | } |
947 | done: | |
948 | spin_unlock_irqrestore (&ehci->lock, flags); | |
e9df41c5 | 949 | return rc; |
1da177e4 LT |
950 | } |
951 | ||
952 | /*-------------------------------------------------------------------------*/ | |
953 | ||
954 | // bulk qh holds the data toggle | |
955 | ||
956 | static void | |
957 | ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep) | |
958 | { | |
959 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
960 | unsigned long flags; | |
35371e4f | 961 | struct ehci_qh *qh; |
1da177e4 LT |
962 | |
963 | /* ASSERT: any requests/urbs are being unlinked */ | |
964 | /* ASSERT: nobody can be submitting urbs for this any more */ | |
965 | ||
966 | rescan: | |
967 | spin_lock_irqsave (&ehci->lock, flags); | |
968 | qh = ep->hcpriv; | |
969 | if (!qh) | |
970 | goto done; | |
971 | ||
972 | /* endpoints can be iso streams. for now, we don't | |
973 | * accelerate iso completions ... so spin a while. | |
974 | */ | |
1082f57a | 975 | if (qh->hw == NULL) { |
8c5bf7be AS |
976 | struct ehci_iso_stream *stream = ep->hcpriv; |
977 | ||
978 | if (!list_empty(&stream->td_list)) | |
979 | goto idle_timeout; | |
980 | ||
981 | /* BUG_ON(!list_empty(&stream->free_list)); */ | |
d0ce5c6b | 982 | reserve_release_iso_bandwidth(ehci, stream, -1); |
8c5bf7be AS |
983 | kfree(stream); |
984 | goto done; | |
1da177e4 LT |
985 | } |
986 | ||
fcc5184e | 987 | qh->unlink_reason |= QH_UNLINK_REQUESTED; |
1da177e4 LT |
988 | switch (qh->qh_state) { |
989 | case QH_STATE_LINKED: | |
fcc5184e AS |
990 | if (list_empty(&qh->qtd_list)) |
991 | qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY; | |
992 | else | |
993 | WARN_ON(1); | |
35371e4f | 994 | if (usb_endpoint_type(&ep->desc) != USB_ENDPOINT_XFER_INT) |
3c273a05 | 995 | start_unlink_async(ehci, qh); |
35371e4f ML |
996 | else |
997 | start_unlink_intr(ehci, qh); | |
1da177e4 | 998 | /* FALL THROUGH */ |
35371e4f | 999 | case QH_STATE_COMPLETING: /* already in unlinking */ |
1da177e4 | 1000 | case QH_STATE_UNLINK: /* wait for hw to finish? */ |
07d29b63 | 1001 | case QH_STATE_UNLINK_WAIT: |
1da177e4 LT |
1002 | idle_timeout: |
1003 | spin_unlock_irqrestore (&ehci->lock, flags); | |
22c43863 | 1004 | schedule_timeout_uninterruptible(1); |
1da177e4 LT |
1005 | goto rescan; |
1006 | case QH_STATE_IDLE: /* fully unlinked */ | |
914b7012 AS |
1007 | if (qh->clearing_tt) |
1008 | goto idle_timeout; | |
1da177e4 | 1009 | if (list_empty (&qh->qtd_list)) { |
d0ce5c6b AS |
1010 | if (qh->ps.bw_uperiod) |
1011 | reserve_release_intr_bandwidth(ehci, qh, -1); | |
c83e1a9f | 1012 | qh_destroy(ehci, qh); |
1da177e4 LT |
1013 | break; |
1014 | } | |
1015 | /* else FALL THROUGH */ | |
1016 | default: | |
1da177e4 LT |
1017 | /* caller was supposed to have unlinked any requests; |
1018 | * that's not our job. just leak this memory. | |
1019 | */ | |
1020 | ehci_err (ehci, "qh %p (#%02x) state %d%s\n", | |
1021 | qh, ep->desc.bEndpointAddress, qh->qh_state, | |
1022 | list_empty (&qh->qtd_list) ? "" : "(has tds)"); | |
1023 | break; | |
1024 | } | |
8c5bf7be | 1025 | done: |
1da177e4 | 1026 | ep->hcpriv = NULL; |
1da177e4 | 1027 | spin_unlock_irqrestore (&ehci->lock, flags); |
1da177e4 LT |
1028 | } |
1029 | ||
b18ffd49 AS |
1030 | static void |
1031 | ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) | |
1032 | { | |
1033 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
1034 | struct ehci_qh *qh; | |
1035 | int eptype = usb_endpoint_type(&ep->desc); | |
a455212d AS |
1036 | int epnum = usb_endpoint_num(&ep->desc); |
1037 | int is_out = usb_endpoint_dir_out(&ep->desc); | |
1038 | unsigned long flags; | |
b18ffd49 AS |
1039 | |
1040 | if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT) | |
1041 | return; | |
1042 | ||
a455212d | 1043 | spin_lock_irqsave(&ehci->lock, flags); |
b18ffd49 AS |
1044 | qh = ep->hcpriv; |
1045 | ||
1046 | /* For Bulk and Interrupt endpoints we maintain the toggle state | |
1047 | * in the hardware; the toggle bits in udev aren't used at all. | |
1048 | * When an endpoint is reset by usb_clear_halt() we must reset | |
1049 | * the toggle bit in the QH. | |
1050 | */ | |
1051 | if (qh) { | |
1052 | if (!list_empty(&qh->qtd_list)) { | |
1053 | WARN_ONCE(1, "clear_halt for a busy endpoint\n"); | |
7bc782d7 | 1054 | } else { |
a455212d AS |
1055 | /* The toggle value in the QH can't be updated |
1056 | * while the QH is active. Unlink it now; | |
1057 | * re-linking will call qh_refresh(). | |
b18ffd49 | 1058 | */ |
ffa0248e | 1059 | usb_settoggle(qh->ps.udev, epnum, is_out, 0); |
fcc5184e | 1060 | qh->unlink_reason |= QH_UNLINK_REQUESTED; |
a448c9d8 | 1061 | if (eptype == USB_ENDPOINT_XFER_BULK) |
3c273a05 | 1062 | start_unlink_async(ehci, qh); |
a448c9d8 | 1063 | else |
df202255 | 1064 | start_unlink_intr(ehci, qh); |
b18ffd49 AS |
1065 | } |
1066 | } | |
a455212d | 1067 | spin_unlock_irqrestore(&ehci->lock, flags); |
b18ffd49 AS |
1068 | } |
1069 | ||
7ff71d6a MP |
1070 | static int ehci_get_frame (struct usb_hcd *hcd) |
1071 | { | |
1072 | struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
68aa95d5 | 1073 | return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size; |
7ff71d6a | 1074 | } |
1da177e4 LT |
1075 | |
1076 | /*-------------------------------------------------------------------------*/ | |
c5cf9212 | 1077 | |
b35c5009 AS |
1078 | /* Device addition and removal */ |
1079 | ||
1080 | static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev) | |
1081 | { | |
1082 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
1083 | ||
1084 | spin_lock_irq(&ehci->lock); | |
1085 | drop_tt(udev); | |
1086 | spin_unlock_irq(&ehci->lock); | |
1087 | } | |
1088 | ||
1089 | /*-------------------------------------------------------------------------*/ | |
1090 | ||
c5cf9212 AS |
1091 | #ifdef CONFIG_PM |
1092 | ||
1093 | /* suspend/resume, section 4.3 */ | |
1094 | ||
1095 | /* These routines handle the generic parts of controller suspend/resume */ | |
1096 | ||
3e023203 | 1097 | int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) |
c5cf9212 AS |
1098 | { |
1099 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
1100 | ||
1101 | if (time_before(jiffies, ehci->next_statechange)) | |
1102 | msleep(10); | |
1103 | ||
1104 | /* | |
1105 | * Root hub was already suspended. Disable IRQ emission and | |
1106 | * mark HW unaccessible. The PM and USB cores make sure that | |
1107 | * the root hub is either suspended or stopped. | |
1108 | */ | |
1109 | ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); | |
1110 | ||
1111 | spin_lock_irq(&ehci->lock); | |
1112 | ehci_writel(ehci, 0, &ehci->regs->intr_enable); | |
1113 | (void) ehci_readl(ehci, &ehci->regs->intr_enable); | |
1114 | ||
1115 | clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | |
1116 | spin_unlock_irq(&ehci->lock); | |
1117 | ||
b8efdafb AS |
1118 | synchronize_irq(hcd->irq); |
1119 | ||
1120 | /* Check for race with a wakeup request */ | |
1121 | if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) { | |
1122 | ehci_resume(hcd, false); | |
1123 | return -EBUSY; | |
1124 | } | |
1125 | ||
c5cf9212 AS |
1126 | return 0; |
1127 | } | |
3e023203 | 1128 | EXPORT_SYMBOL_GPL(ehci_suspend); |
c5cf9212 AS |
1129 | |
1130 | /* Returns 0 if power was preserved, 1 if power was lost */ | |
314b41b1 | 1131 | int ehci_resume(struct usb_hcd *hcd, bool force_reset) |
c5cf9212 AS |
1132 | { |
1133 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
1134 | ||
1135 | if (time_before(jiffies, ehci->next_statechange)) | |
1136 | msleep(100); | |
1137 | ||
1138 | /* Mark hardware accessible again as we are back to full power by now */ | |
1139 | set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | |
1140 | ||
43fe3a99 AS |
1141 | if (ehci->shutdown) |
1142 | return 0; /* Controller is dead */ | |
1143 | ||
c5cf9212 | 1144 | /* |
314b41b1 | 1145 | * If CF is still set and reset isn't forced |
c5cf9212 AS |
1146 | * then we maintained suspend power. |
1147 | * Just undo the effect of ehci_suspend(). | |
1148 | */ | |
1149 | if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF && | |
314b41b1 | 1150 | !force_reset) { |
c5cf9212 AS |
1151 | int mask = INTR_MASK; |
1152 | ||
1153 | ehci_prepare_ports_for_controller_resume(ehci); | |
43fe3a99 AS |
1154 | |
1155 | spin_lock_irq(&ehci->lock); | |
1156 | if (ehci->shutdown) | |
1157 | goto skip; | |
1158 | ||
c5cf9212 AS |
1159 | if (!hcd->self.root_hub->do_remote_wakeup) |
1160 | mask &= ~STS_PCD; | |
1161 | ehci_writel(ehci, mask, &ehci->regs->intr_enable); | |
1162 | ehci_readl(ehci, &ehci->regs->intr_enable); | |
43fe3a99 AS |
1163 | skip: |
1164 | spin_unlock_irq(&ehci->lock); | |
c5cf9212 AS |
1165 | return 0; |
1166 | } | |
1167 | ||
1168 | /* | |
1169 | * Else reset, to cope with power loss or resume from hibernation | |
1170 | * having let the firmware kick in during reboot. | |
1171 | */ | |
1172 | usb_root_hub_lost_power(hcd->self.root_hub); | |
1173 | (void) ehci_halt(ehci); | |
1174 | (void) ehci_reset(ehci); | |
1175 | ||
43fe3a99 AS |
1176 | spin_lock_irq(&ehci->lock); |
1177 | if (ehci->shutdown) | |
1178 | goto skip; | |
1179 | ||
c5cf9212 AS |
1180 | ehci_writel(ehci, ehci->command, &ehci->regs->command); |
1181 | ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); | |
1182 | ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ | |
1183 | ||
43fe3a99 AS |
1184 | ehci->rh_state = EHCI_RH_SUSPENDED; |
1185 | spin_unlock_irq(&ehci->lock); | |
1186 | ||
c5cf9212 AS |
1187 | return 1; |
1188 | } | |
3e023203 | 1189 | EXPORT_SYMBOL_GPL(ehci_resume); |
c5cf9212 AS |
1190 | |
1191 | #endif | |
1192 | ||
1193 | /*-------------------------------------------------------------------------*/ | |
1194 | ||
3e023203 AS |
1195 | /* |
1196 | * Generic structure: This gets copied for platform drivers so that | |
1197 | * individual entries can be overridden as needed. | |
1198 | */ | |
1199 | ||
1200 | static const struct hc_driver ehci_hc_driver = { | |
1201 | .description = hcd_name, | |
1202 | .product_desc = "EHCI Host Controller", | |
1203 | .hcd_priv_size = sizeof(struct ehci_hcd), | |
1204 | ||
1205 | /* | |
1206 | * generic hardware linkage | |
1207 | */ | |
1208 | .irq = ehci_irq, | |
c04ee4b1 | 1209 | .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, |
3e023203 AS |
1210 | |
1211 | /* | |
1212 | * basic lifecycle operations | |
1213 | */ | |
1214 | .reset = ehci_setup, | |
1215 | .start = ehci_run, | |
1216 | .stop = ehci_stop, | |
1217 | .shutdown = ehci_shutdown, | |
1218 | ||
1219 | /* | |
1220 | * managing i/o requests and associated device resources | |
1221 | */ | |
1222 | .urb_enqueue = ehci_urb_enqueue, | |
1223 | .urb_dequeue = ehci_urb_dequeue, | |
1224 | .endpoint_disable = ehci_endpoint_disable, | |
1225 | .endpoint_reset = ehci_endpoint_reset, | |
1226 | .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, | |
1227 | ||
1228 | /* | |
1229 | * scheduling support | |
1230 | */ | |
1231 | .get_frame_number = ehci_get_frame, | |
1232 | ||
1233 | /* | |
1234 | * root hub support | |
1235 | */ | |
1236 | .hub_status_data = ehci_hub_status_data, | |
1237 | .hub_control = ehci_hub_control, | |
1238 | .bus_suspend = ehci_bus_suspend, | |
1239 | .bus_resume = ehci_bus_resume, | |
1240 | .relinquish_port = ehci_relinquish_port, | |
1241 | .port_handed_over = ehci_port_handed_over, | |
b35c5009 AS |
1242 | |
1243 | /* | |
1244 | * device support | |
1245 | */ | |
1246 | .free_dev = ehci_remove_device, | |
3e023203 AS |
1247 | }; |
1248 | ||
1249 | void ehci_init_driver(struct hc_driver *drv, | |
1250 | const struct ehci_driver_overrides *over) | |
1251 | { | |
1252 | /* Copy the generic table to drv and then apply the overrides */ | |
1253 | *drv = ehci_hc_driver; | |
1254 | ||
1b36810e AS |
1255 | if (over) { |
1256 | drv->hcd_priv_size += over->extra_priv_size; | |
1257 | if (over->reset) | |
1258 | drv->reset = over->reset; | |
11a7e594 MG |
1259 | if (over->port_power) |
1260 | drv->port_power = over->port_power; | |
1b36810e | 1261 | } |
3e023203 AS |
1262 | } |
1263 | EXPORT_SYMBOL_GPL(ehci_init_driver); | |
1264 | ||
1265 | /*-------------------------------------------------------------------------*/ | |
1266 | ||
2b70f073 | 1267 | MODULE_DESCRIPTION(DRIVER_DESC); |
1da177e4 LT |
1268 | MODULE_AUTHOR (DRIVER_AUTHOR); |
1269 | MODULE_LICENSE ("GPL"); | |
1270 | ||
60b0bf0f | 1271 | #ifdef CONFIG_USB_EHCI_SH |
63c84552 PM |
1272 | #include "ehci-sh.c" |
1273 | #define PLATFORM_DRIVER ehci_hcd_sh_driver | |
1274 | #endif | |
1275 | ||
ad75a410 GL |
1276 | #ifdef CONFIG_PPC_PS3 |
1277 | #include "ehci-ps3.c" | |
7a4eb7fd | 1278 | #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver |
ad75a410 GL |
1279 | #endif |
1280 | ||
da0e8fb0 VB |
1281 | #ifdef CONFIG_USB_EHCI_HCD_PPC_OF |
1282 | #include "ehci-ppc-of.c" | |
1283 | #define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver | |
1284 | #endif | |
1285 | ||
08d3c18e JZ |
1286 | #ifdef CONFIG_XPS_USB_HCD_XILINX |
1287 | #include "ehci-xilinx-of.c" | |
1f23b2d9 | 1288 | #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver |
08d3c18e JZ |
1289 | #endif |
1290 | ||
47fc28bf CM |
1291 | #ifdef CONFIG_TILE_USB |
1292 | #include "ehci-tilegx.c" | |
1293 | #define PLATFORM_DRIVER ehci_hcd_tilegx_driver | |
1294 | #endif | |
1295 | ||
22ced687 A |
1296 | #ifdef CONFIG_USB_EHCI_HCD_PMC_MSP |
1297 | #include "ehci-pmcmsp.c" | |
1298 | #define PLATFORM_DRIVER ehci_hcd_msp_driver | |
1299 | #endif | |
1300 | ||
9be03929 JA |
1301 | #ifdef CONFIG_SPARC_LEON |
1302 | #include "ehci-grlib.c" | |
1303 | #define PLATFORM_DRIVER ehci_grlib_driver | |
1304 | #endif | |
1305 | ||
3a082ec9 NZ |
1306 | #ifdef CONFIG_USB_EHCI_MV |
1307 | #include "ehci-mv.c" | |
1308 | #define PLATFORM_DRIVER ehci_mv_driver | |
1309 | #endif | |
f30cdbcb | 1310 | |
c256667f SH |
1311 | #ifdef CONFIG_MIPS_SEAD3 |
1312 | #include "ehci-sead3.c" | |
1313 | #define PLATFORM_DRIVER ehci_hcd_sead3_driver | |
1314 | #endif | |
1315 | ||
01cced25 KG |
1316 | static int __init ehci_hcd_init(void) |
1317 | { | |
1318 | int retval = 0; | |
1319 | ||
2b70f073 AS |
1320 | if (usb_disabled()) |
1321 | return -ENODEV; | |
1322 | ||
1323 | printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); | |
9beeee65 AS |
1324 | set_bit(USB_EHCI_LOADED, &usb_hcds_loaded); |
1325 | if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) || | |
1326 | test_bit(USB_OHCI_LOADED, &usb_hcds_loaded)) | |
1327 | printk(KERN_WARNING "Warning! ehci_hcd should always be loaded" | |
1328 | " before uhci_hcd and ohci_hcd, not after\n"); | |
1329 | ||
01cced25 KG |
1330 | pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", |
1331 | hcd_name, | |
1332 | sizeof(struct ehci_qh), sizeof(struct ehci_qtd), | |
1333 | sizeof(struct ehci_itd), sizeof(struct ehci_sitd)); | |
1334 | ||
1c20163d | 1335 | #ifdef CONFIG_DYNAMIC_DEBUG |
08f4e586 | 1336 | ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root); |
9beeee65 AS |
1337 | if (!ehci_debug_root) { |
1338 | retval = -ENOENT; | |
1339 | goto err_debug; | |
1340 | } | |
694cc208 TJ |
1341 | #endif |
1342 | ||
01cced25 KG |
1343 | #ifdef PLATFORM_DRIVER |
1344 | retval = platform_driver_register(&PLATFORM_DRIVER); | |
da0e8fb0 VB |
1345 | if (retval < 0) |
1346 | goto clean0; | |
01cced25 KG |
1347 | #endif |
1348 | ||
ad75a410 | 1349 | #ifdef PS3_SYSTEM_BUS_DRIVER |
7a4eb7fd | 1350 | retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER); |
da0e8fb0 VB |
1351 | if (retval < 0) |
1352 | goto clean2; | |
694cc208 | 1353 | #endif |
da0e8fb0 VB |
1354 | |
1355 | #ifdef OF_PLATFORM_DRIVER | |
d35fb641 | 1356 | retval = platform_driver_register(&OF_PLATFORM_DRIVER); |
da0e8fb0 VB |
1357 | if (retval < 0) |
1358 | goto clean3; | |
1359 | #endif | |
1f23b2d9 GL |
1360 | |
1361 | #ifdef XILINX_OF_PLATFORM_DRIVER | |
d35fb641 | 1362 | retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER); |
1f23b2d9 GL |
1363 | if (retval < 0) |
1364 | goto clean4; | |
1365 | #endif | |
da0e8fb0 VB |
1366 | return retval; |
1367 | ||
1f23b2d9 | 1368 | #ifdef XILINX_OF_PLATFORM_DRIVER |
d35fb641 | 1369 | /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */ |
1f23b2d9 GL |
1370 | clean4: |
1371 | #endif | |
da0e8fb0 | 1372 | #ifdef OF_PLATFORM_DRIVER |
d35fb641 | 1373 | platform_driver_unregister(&OF_PLATFORM_DRIVER); |
da0e8fb0 VB |
1374 | clean3: |
1375 | #endif | |
1376 | #ifdef PS3_SYSTEM_BUS_DRIVER | |
1377 | ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); | |
1378 | clean2: | |
ad75a410 | 1379 | #endif |
da0e8fb0 VB |
1380 | #ifdef PLATFORM_DRIVER |
1381 | platform_driver_unregister(&PLATFORM_DRIVER); | |
1382 | clean0: | |
1383 | #endif | |
1c20163d | 1384 | #ifdef CONFIG_DYNAMIC_DEBUG |
da0e8fb0 VB |
1385 | debugfs_remove(ehci_debug_root); |
1386 | ehci_debug_root = NULL; | |
9beeee65 | 1387 | err_debug: |
a9b6148d | 1388 | #endif |
9beeee65 | 1389 | clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); |
01cced25 KG |
1390 | return retval; |
1391 | } | |
1392 | module_init(ehci_hcd_init); | |
1393 | ||
1394 | static void __exit ehci_hcd_cleanup(void) | |
1395 | { | |
1f23b2d9 | 1396 | #ifdef XILINX_OF_PLATFORM_DRIVER |
d35fb641 | 1397 | platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); |
1f23b2d9 | 1398 | #endif |
da0e8fb0 | 1399 | #ifdef OF_PLATFORM_DRIVER |
d35fb641 | 1400 | platform_driver_unregister(&OF_PLATFORM_DRIVER); |
da0e8fb0 | 1401 | #endif |
01cced25 KG |
1402 | #ifdef PLATFORM_DRIVER |
1403 | platform_driver_unregister(&PLATFORM_DRIVER); | |
1404 | #endif | |
ad75a410 | 1405 | #ifdef PS3_SYSTEM_BUS_DRIVER |
7a4eb7fd | 1406 | ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); |
ad75a410 | 1407 | #endif |
1c20163d | 1408 | #ifdef CONFIG_DYNAMIC_DEBUG |
694cc208 TJ |
1409 | debugfs_remove(ehci_debug_root); |
1410 | #endif | |
9beeee65 | 1411 | clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); |
01cced25 KG |
1412 | } |
1413 | module_exit(ehci_hcd_cleanup); |