Commit | Line | Data |
---|---|---|
1a189b97 RK |
1 | #ifndef __LINUX_PWM_H |
2 | #define __LINUX_PWM_H | |
3 | ||
0bcf168b | 4 | #include <linux/err.h> |
d1cd2142 | 5 | #include <linux/mutex.h> |
7299ab70 TR |
6 | #include <linux/of.h> |
7 | ||
62099abf | 8 | struct seq_file; |
0c2498f1 SH |
9 | struct pwm_chip; |
10 | ||
0aa0869c PA |
11 | /** |
12 | * enum pwm_polarity - polarity of a PWM signal | |
13 | * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty- | |
14 | * cycle, followed by a low signal for the remainder of the pulse | |
15 | * period | |
16 | * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty- | |
17 | * cycle, followed by a high signal for the remainder of the pulse | |
18 | * period | |
19 | */ | |
20 | enum pwm_polarity { | |
21 | PWM_POLARITY_NORMAL, | |
22 | PWM_POLARITY_INVERSED, | |
23 | }; | |
24 | ||
e39c0df1 BB |
25 | /** |
26 | * struct pwm_args - board-dependent PWM arguments | |
27 | * @period: reference period | |
28 | * @polarity: reference polarity | |
29 | * | |
30 | * This structure describes board-dependent arguments attached to a PWM | |
31 | * device. These arguments are usually retrieved from the PWM lookup table or | |
32 | * device tree. | |
33 | * | |
34 | * Do not confuse this with the PWM state: PWM arguments represent the initial | |
35 | * configuration that users want to use on this PWM device rather than the | |
36 | * current PWM hardware state. | |
37 | */ | |
38 | struct pwm_args { | |
39 | unsigned int period; | |
40 | enum pwm_polarity polarity; | |
41 | }; | |
42 | ||
f051c466 TR |
43 | enum { |
44 | PWMF_REQUESTED = 1 << 0, | |
09a7e4a3 | 45 | PWMF_EXPORTED = 1 << 1, |
f051c466 TR |
46 | }; |
47 | ||
43a276b0 BB |
48 | /* |
49 | * struct pwm_state - state of a PWM channel | |
50 | * @period: PWM period (in nanoseconds) | |
51 | * @duty_cycle: PWM duty cycle (in nanoseconds) | |
52 | * @polarity: PWM polarity | |
09a7e4a3 | 53 | * @enabled: PWM enabled status |
43a276b0 BB |
54 | */ |
55 | struct pwm_state { | |
56 | unsigned int period; | |
57 | unsigned int duty_cycle; | |
58 | enum pwm_polarity polarity; | |
09a7e4a3 | 59 | bool enabled; |
43a276b0 BB |
60 | }; |
61 | ||
04883802 TR |
62 | /** |
63 | * struct pwm_device - PWM channel object | |
64 | * @label: name of the PWM device | |
65 | * @flags: flags associated with the PWM device | |
66 | * @hwpwm: per-chip relative index of the PWM device | |
67 | * @pwm: global index of the PWM device | |
68 | * @chip: PWM chip providing this PWM device | |
69 | * @chip_data: chip-private data associated with the PWM device | |
e39c0df1 | 70 | * @args: PWM arguments |
43a276b0 | 71 | * @state: curent PWM channel state |
04883802 | 72 | */ |
f051c466 | 73 | struct pwm_device { |
6bc7064a TR |
74 | const char *label; |
75 | unsigned long flags; | |
76 | unsigned int hwpwm; | |
77 | unsigned int pwm; | |
78 | struct pwm_chip *chip; | |
79 | void *chip_data; | |
80 | ||
e39c0df1 | 81 | struct pwm_args args; |
43a276b0 | 82 | struct pwm_state state; |
f051c466 TR |
83 | }; |
84 | ||
43a276b0 BB |
85 | /** |
86 | * pwm_get_state() - retrieve the current PWM state | |
87 | * @pwm: PWM device | |
88 | * @state: state to fill with the current PWM state | |
89 | */ | |
90 | static inline void pwm_get_state(const struct pwm_device *pwm, | |
91 | struct pwm_state *state) | |
92 | { | |
93 | *state = pwm->state; | |
94 | } | |
95 | ||
5c31252c BB |
96 | static inline bool pwm_is_enabled(const struct pwm_device *pwm) |
97 | { | |
09a7e4a3 BB |
98 | struct pwm_state state; |
99 | ||
100 | pwm_get_state(pwm, &state); | |
101 | ||
102 | return state.enabled; | |
5c31252c BB |
103 | } |
104 | ||
f051c466 TR |
105 | static inline void pwm_set_period(struct pwm_device *pwm, unsigned int period) |
106 | { | |
107 | if (pwm) | |
43a276b0 | 108 | pwm->state.period = period; |
f051c466 TR |
109 | } |
110 | ||
a1cf4217 | 111 | static inline unsigned int pwm_get_period(const struct pwm_device *pwm) |
f051c466 | 112 | { |
43a276b0 BB |
113 | struct pwm_state state; |
114 | ||
115 | pwm_get_state(pwm, &state); | |
116 | ||
117 | return state.period; | |
f051c466 TR |
118 | } |
119 | ||
76abbdde HS |
120 | static inline void pwm_set_duty_cycle(struct pwm_device *pwm, unsigned int duty) |
121 | { | |
122 | if (pwm) | |
43a276b0 | 123 | pwm->state.duty_cycle = duty; |
76abbdde HS |
124 | } |
125 | ||
a1cf4217 | 126 | static inline unsigned int pwm_get_duty_cycle(const struct pwm_device *pwm) |
76abbdde | 127 | { |
43a276b0 BB |
128 | struct pwm_state state; |
129 | ||
130 | pwm_get_state(pwm, &state); | |
131 | ||
132 | return state.duty_cycle; | |
76abbdde HS |
133 | } |
134 | ||
011e7631 BB |
135 | static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm) |
136 | { | |
43a276b0 BB |
137 | struct pwm_state state; |
138 | ||
139 | pwm_get_state(pwm, &state); | |
140 | ||
141 | return state.polarity; | |
011e7631 BB |
142 | } |
143 | ||
e39c0df1 BB |
144 | static inline void pwm_get_args(const struct pwm_device *pwm, |
145 | struct pwm_args *args) | |
146 | { | |
147 | *args = pwm->args; | |
148 | } | |
149 | ||
0c2498f1 SH |
150 | /** |
151 | * struct pwm_ops - PWM controller operations | |
152 | * @request: optional hook for requesting a PWM | |
153 | * @free: optional hook for freeing a PWM | |
154 | * @config: configure duty cycles and period length for this PWM | |
0aa0869c | 155 | * @set_polarity: configure the polarity of this PWM |
0c2498f1 SH |
156 | * @enable: enable PWM output toggling |
157 | * @disable: disable PWM output toggling | |
5ec803ed BB |
158 | * @apply: atomically apply a new PWM config. The state argument |
159 | * should be adjusted with the real hardware config (if the | |
160 | * approximate the period or duty_cycle value, state should | |
161 | * reflect it) | |
15fa8a43 BB |
162 | * @get_state: get the current PWM state. This function is only |
163 | * called once per PWM device when the PWM chip is | |
164 | * registered. | |
62099abf | 165 | * @dbg_show: optional routine to show contents in debugfs |
0c2498f1 SH |
166 | * @owner: helps prevent removal of modules exporting active PWMs |
167 | */ | |
168 | struct pwm_ops { | |
6bc7064a TR |
169 | int (*request)(struct pwm_chip *chip, struct pwm_device *pwm); |
170 | void (*free)(struct pwm_chip *chip, struct pwm_device *pwm); | |
171 | int (*config)(struct pwm_chip *chip, struct pwm_device *pwm, | |
172 | int duty_ns, int period_ns); | |
173 | int (*set_polarity)(struct pwm_chip *chip, struct pwm_device *pwm, | |
174 | enum pwm_polarity polarity); | |
175 | int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm); | |
176 | void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm); | |
5ec803ed BB |
177 | int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm, |
178 | struct pwm_state *state); | |
15fa8a43 BB |
179 | void (*get_state)(struct pwm_chip *chip, struct pwm_device *pwm, |
180 | struct pwm_state *state); | |
62099abf | 181 | #ifdef CONFIG_DEBUG_FS |
6bc7064a | 182 | void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s); |
62099abf | 183 | #endif |
6bc7064a | 184 | struct module *owner; |
0c2498f1 SH |
185 | }; |
186 | ||
187 | /** | |
f051c466 TR |
188 | * struct pwm_chip - abstract a PWM controller |
189 | * @dev: device providing the PWMs | |
190 | * @list: list node for internal use | |
191 | * @ops: callbacks for this PWM controller | |
192 | * @base: number of first PWM controlled by this chip | |
193 | * @npwm: number of PWMs controlled by this chip | |
194 | * @pwms: array of PWM devices allocated by the framework | |
04883802 TR |
195 | * @of_xlate: request a PWM device given a device tree PWM specifier |
196 | * @of_pwm_n_cells: number of cells expected in the device tree PWM specifier | |
6e69ab13 FV |
197 | * @can_sleep: must be true if the .config(), .enable() or .disable() |
198 | * operations may sleep | |
0c2498f1 SH |
199 | */ |
200 | struct pwm_chip { | |
6bc7064a TR |
201 | struct device *dev; |
202 | struct list_head list; | |
203 | const struct pwm_ops *ops; | |
204 | int base; | |
205 | unsigned int npwm; | |
206 | ||
207 | struct pwm_device *pwms; | |
208 | ||
209 | struct pwm_device * (*of_xlate)(struct pwm_chip *pc, | |
210 | const struct of_phandle_args *args); | |
211 | unsigned int of_pwm_n_cells; | |
212 | bool can_sleep; | |
0c2498f1 SH |
213 | }; |
214 | ||
0bcf168b | 215 | #if IS_ENABLED(CONFIG_PWM) |
5ec803ed BB |
216 | /* PWM user APIs */ |
217 | struct pwm_device *pwm_request(int pwm_id, const char *label); | |
218 | void pwm_free(struct pwm_device *pwm); | |
219 | int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state); | |
220 | int pwm_adjust_config(struct pwm_device *pwm); | |
221 | ||
222 | /** | |
223 | * pwm_config() - change a PWM device configuration | |
224 | * @pwm: PWM device | |
225 | * @duty_ns: "on" time (in nanoseconds) | |
226 | * @period_ns: duration (in nanoseconds) of one cycle | |
227 | * | |
228 | * Returns: 0 on success or a negative error code on failure. | |
229 | */ | |
230 | static inline int pwm_config(struct pwm_device *pwm, int duty_ns, | |
231 | int period_ns) | |
232 | { | |
233 | struct pwm_state state; | |
234 | ||
235 | if (!pwm) | |
236 | return -EINVAL; | |
237 | ||
ef2bf499 BN |
238 | if (duty_ns < 0 || period_ns < 0) |
239 | return -EINVAL; | |
240 | ||
5ec803ed BB |
241 | pwm_get_state(pwm, &state); |
242 | if (state.duty_cycle == duty_ns && state.period == period_ns) | |
243 | return 0; | |
244 | ||
245 | state.duty_cycle = duty_ns; | |
246 | state.period = period_ns; | |
247 | return pwm_apply_state(pwm, &state); | |
248 | } | |
249 | ||
250 | /** | |
251 | * pwm_set_polarity() - configure the polarity of a PWM signal | |
252 | * @pwm: PWM device | |
253 | * @polarity: new polarity of the PWM signal | |
254 | * | |
255 | * Note that the polarity cannot be configured while the PWM device is | |
256 | * enabled. | |
257 | * | |
258 | * Returns: 0 on success or a negative error code on failure. | |
259 | */ | |
260 | static inline int pwm_set_polarity(struct pwm_device *pwm, | |
261 | enum pwm_polarity polarity) | |
262 | { | |
263 | struct pwm_state state; | |
264 | ||
265 | if (!pwm) | |
266 | return -EINVAL; | |
267 | ||
268 | pwm_get_state(pwm, &state); | |
269 | if (state.polarity == polarity) | |
270 | return 0; | |
271 | ||
272 | /* | |
273 | * Changing the polarity of a running PWM without adjusting the | |
274 | * dutycycle/period value is a bit risky (can introduce glitches). | |
275 | * Return -EBUSY in this case. | |
276 | * Note that this is allowed when using pwm_apply_state() because | |
277 | * the user specifies all the parameters. | |
278 | */ | |
279 | if (state.enabled) | |
280 | return -EBUSY; | |
281 | ||
282 | state.polarity = polarity; | |
283 | return pwm_apply_state(pwm, &state); | |
284 | } | |
285 | ||
286 | /** | |
287 | * pwm_enable() - start a PWM output toggling | |
288 | * @pwm: PWM device | |
289 | * | |
290 | * Returns: 0 on success or a negative error code on failure. | |
291 | */ | |
292 | static inline int pwm_enable(struct pwm_device *pwm) | |
293 | { | |
294 | struct pwm_state state; | |
295 | ||
296 | if (!pwm) | |
297 | return -EINVAL; | |
298 | ||
299 | pwm_get_state(pwm, &state); | |
300 | if (state.enabled) | |
301 | return 0; | |
302 | ||
303 | state.enabled = true; | |
304 | return pwm_apply_state(pwm, &state); | |
305 | } | |
306 | ||
307 | /** | |
308 | * pwm_disable() - stop a PWM output toggling | |
309 | * @pwm: PWM device | |
310 | */ | |
311 | static inline void pwm_disable(struct pwm_device *pwm) | |
312 | { | |
313 | struct pwm_state state; | |
314 | ||
315 | if (!pwm) | |
316 | return; | |
317 | ||
318 | pwm_get_state(pwm, &state); | |
319 | if (!state.enabled) | |
320 | return; | |
321 | ||
322 | state.enabled = false; | |
323 | pwm_apply_state(pwm, &state); | |
324 | } | |
325 | ||
326 | ||
327 | /* PWM provider APIs */ | |
f051c466 TR |
328 | int pwm_set_chip_data(struct pwm_device *pwm, void *data); |
329 | void *pwm_get_chip_data(struct pwm_device *pwm); | |
330 | ||
b6a00fae TK |
331 | int pwmchip_add_with_polarity(struct pwm_chip *chip, |
332 | enum pwm_polarity polarity); | |
0c2498f1 SH |
333 | int pwmchip_add(struct pwm_chip *chip); |
334 | int pwmchip_remove(struct pwm_chip *chip); | |
f051c466 TR |
335 | struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, |
336 | unsigned int index, | |
337 | const char *label); | |
8138d2dd | 338 | |
83af2402 PA |
339 | struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc, |
340 | const struct of_phandle_args *args); | |
341 | ||
d4c0c470 | 342 | struct pwm_device *pwm_get(struct device *dev, const char *con_id); |
8eb96127 | 343 | struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id); |
8138d2dd TR |
344 | void pwm_put(struct pwm_device *pwm); |
345 | ||
d4c0c470 | 346 | struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id); |
261a5edd PU |
347 | struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np, |
348 | const char *con_id); | |
6354316d | 349 | void devm_pwm_put(struct device *dev, struct pwm_device *pwm); |
6e69ab13 FV |
350 | |
351 | bool pwm_can_sleep(struct pwm_device *pwm); | |
0bcf168b | 352 | #else |
5ec803ed BB |
353 | static inline struct pwm_device *pwm_request(int pwm_id, const char *label) |
354 | { | |
355 | return ERR_PTR(-ENODEV); | |
356 | } | |
357 | ||
358 | static inline void pwm_free(struct pwm_device *pwm) | |
359 | { | |
360 | } | |
361 | ||
362 | static inline int pwm_apply_state(struct pwm_device *pwm, | |
363 | const struct pwm_state *state) | |
364 | { | |
365 | return -ENOTSUPP; | |
366 | } | |
367 | ||
368 | static inline int pwm_adjust_config(struct pwm_device *pwm) | |
369 | { | |
370 | return -ENOTSUPP; | |
371 | } | |
372 | ||
373 | static inline int pwm_config(struct pwm_device *pwm, int duty_ns, | |
374 | int period_ns) | |
375 | { | |
376 | return -EINVAL; | |
377 | } | |
378 | ||
379 | static inline int pwm_set_polarity(struct pwm_device *pwm, | |
380 | enum pwm_polarity polarity) | |
381 | { | |
382 | return -ENOTSUPP; | |
383 | } | |
384 | ||
385 | static inline int pwm_enable(struct pwm_device *pwm) | |
386 | { | |
387 | return -EINVAL; | |
388 | } | |
389 | ||
390 | static inline void pwm_disable(struct pwm_device *pwm) | |
391 | { | |
392 | } | |
393 | ||
0bcf168b TB |
394 | static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data) |
395 | { | |
396 | return -EINVAL; | |
397 | } | |
398 | ||
399 | static inline void *pwm_get_chip_data(struct pwm_device *pwm) | |
400 | { | |
401 | return NULL; | |
402 | } | |
403 | ||
404 | static inline int pwmchip_add(struct pwm_chip *chip) | |
405 | { | |
406 | return -EINVAL; | |
407 | } | |
408 | ||
b6a00fae TK |
409 | static inline int pwmchip_add_inversed(struct pwm_chip *chip) |
410 | { | |
411 | return -EINVAL; | |
412 | } | |
413 | ||
0bcf168b TB |
414 | static inline int pwmchip_remove(struct pwm_chip *chip) |
415 | { | |
416 | return -EINVAL; | |
417 | } | |
418 | ||
419 | static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, | |
420 | unsigned int index, | |
421 | const char *label) | |
422 | { | |
423 | return ERR_PTR(-ENODEV); | |
424 | } | |
425 | ||
426 | static inline struct pwm_device *pwm_get(struct device *dev, | |
427 | const char *consumer) | |
428 | { | |
429 | return ERR_PTR(-ENODEV); | |
430 | } | |
431 | ||
8eb96127 PU |
432 | static inline struct pwm_device *of_pwm_get(struct device_node *np, |
433 | const char *con_id) | |
434 | { | |
435 | return ERR_PTR(-ENODEV); | |
436 | } | |
437 | ||
0bcf168b TB |
438 | static inline void pwm_put(struct pwm_device *pwm) |
439 | { | |
440 | } | |
441 | ||
442 | static inline struct pwm_device *devm_pwm_get(struct device *dev, | |
443 | const char *consumer) | |
444 | { | |
445 | return ERR_PTR(-ENODEV); | |
446 | } | |
447 | ||
261a5edd PU |
448 | static inline struct pwm_device *devm_of_pwm_get(struct device *dev, |
449 | struct device_node *np, | |
450 | const char *con_id) | |
451 | { | |
452 | return ERR_PTR(-ENODEV); | |
453 | } | |
454 | ||
0bcf168b TB |
455 | static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm) |
456 | { | |
457 | } | |
6e69ab13 FV |
458 | |
459 | static inline bool pwm_can_sleep(struct pwm_device *pwm) | |
460 | { | |
461 | return false; | |
462 | } | |
0bcf168b | 463 | #endif |
6354316d | 464 | |
5ec803ed BB |
465 | static inline void pwm_apply_args(struct pwm_device *pwm) |
466 | { | |
33cdcee0 BB |
467 | struct pwm_state state = { }; |
468 | ||
5ec803ed BB |
469 | /* |
470 | * PWM users calling pwm_apply_args() expect to have a fresh config | |
471 | * where the polarity and period are set according to pwm_args info. | |
472 | * The problem is, polarity can only be changed when the PWM is | |
473 | * disabled. | |
474 | * | |
475 | * PWM drivers supporting hardware readout may declare the PWM device | |
476 | * as enabled, and prevent polarity setting, which changes from the | |
477 | * existing behavior, where all PWM devices are declared as disabled | |
478 | * at startup (even if they are actually enabled), thus authorizing | |
479 | * polarity setting. | |
480 | * | |
33cdcee0 BB |
481 | * To fulfill this requirement, we apply a new state which disables |
482 | * the PWM device and set the reference period and polarity config. | |
5ec803ed BB |
483 | * |
484 | * Note that PWM users requiring a smooth handover between the | |
485 | * bootloader and the kernel (like critical regulators controlled by | |
486 | * PWM devices) will have to switch to the atomic API and avoid calling | |
487 | * pwm_apply_args(). | |
488 | */ | |
33cdcee0 BB |
489 | |
490 | state.enabled = false; | |
491 | state.polarity = pwm->args.polarity; | |
492 | state.period = pwm->args.period; | |
493 | ||
494 | pwm_apply_state(pwm, &state); | |
5ec803ed BB |
495 | } |
496 | ||
8138d2dd TR |
497 | struct pwm_lookup { |
498 | struct list_head list; | |
499 | const char *provider; | |
500 | unsigned int index; | |
501 | const char *dev_id; | |
502 | const char *con_id; | |
3796ce1d AB |
503 | unsigned int period; |
504 | enum pwm_polarity polarity; | |
8138d2dd TR |
505 | }; |
506 | ||
42844029 | 507 | #define PWM_LOOKUP(_provider, _index, _dev_id, _con_id, _period, _polarity) \ |
8138d2dd TR |
508 | { \ |
509 | .provider = _provider, \ | |
510 | .index = _index, \ | |
511 | .dev_id = _dev_id, \ | |
512 | .con_id = _con_id, \ | |
42844029 AB |
513 | .period = _period, \ |
514 | .polarity = _polarity \ | |
8138d2dd TR |
515 | } |
516 | ||
0bcf168b | 517 | #if IS_ENABLED(CONFIG_PWM) |
8138d2dd | 518 | void pwm_add_table(struct pwm_lookup *table, size_t num); |
efb0de55 | 519 | void pwm_remove_table(struct pwm_lookup *table, size_t num); |
0bcf168b TB |
520 | #else |
521 | static inline void pwm_add_table(struct pwm_lookup *table, size_t num) | |
522 | { | |
523 | } | |
efb0de55 SK |
524 | |
525 | static inline void pwm_remove_table(struct pwm_lookup *table, size_t num) | |
526 | { | |
527 | } | |
0c2498f1 SH |
528 | #endif |
529 | ||
76abbdde HS |
530 | #ifdef CONFIG_PWM_SYSFS |
531 | void pwmchip_sysfs_export(struct pwm_chip *chip); | |
532 | void pwmchip_sysfs_unexport(struct pwm_chip *chip); | |
533 | #else | |
534 | static inline void pwmchip_sysfs_export(struct pwm_chip *chip) | |
535 | { | |
536 | } | |
537 | ||
538 | static inline void pwmchip_sysfs_unexport(struct pwm_chip *chip) | |
539 | { | |
540 | } | |
541 | #endif /* CONFIG_PWM_SYSFS */ | |
542 | ||
5243ef8b | 543 | #endif /* __LINUX_PWM_H */ |