Commit | Line | Data |
---|---|---|
dc5c3759 MS |
1 | /* Main header for the Hitachi h8/300 architecture. */ |
2 | ||
3 | #include "bfd.h" | |
4 | ||
5 | #ifndef SIM_MAIN_H | |
6 | #define SIM_MAIN_H | |
7 | ||
8 | #define DEBUG | |
9 | ||
10 | /* These define the size of main memory for the simulator. | |
11 | ||
12 | Note the size of main memory for the H8/300H is only 256k. Keeping it | |
13 | small makes the simulator run much faster and consume less memory. | |
14 | ||
15 | The linker knows about the limited size of the simulator's main memory | |
16 | on the H8/300H (via the h8300h.sc linker script). So if you change | |
17 | H8300H_MSIZE, be sure to fix the linker script too. | |
18 | ||
19 | Also note that there's a separate "eightbit" area aside from main | |
20 | memory. For simplicity, the simulator assumes any data memory reference | |
21 | outside of main memory refers to the eightbit area (in theory, this | |
22 | can only happen when simulating H8/300H programs). We make no attempt | |
23 | to catch overlapping addresses, wrapped addresses, etc etc. */ | |
24 | ||
25 | #define H8300_MSIZE (1 << 16) | |
26 | ||
27 | /* avolkov: | |
28 | Next 2 macros are ugly for any workstation, but while they're work. | |
29 | Memory size MUST be configurable. */ | |
f5d3df96 | 30 | #define H8300H_MSIZE (1 << 24) |
dc5c3759 MS |
31 | #define H8300S_MSIZE (1 << 24) |
32 | ||
33 | #define CSIZE 1024 | |
34 | ||
35 | enum h8_regnum { | |
36 | R0_REGNUM = 0, | |
37 | R1_REGNUM = 1, | |
38 | R2_REGNUM = 2, | |
39 | R3_REGNUM = 3, | |
40 | R4_REGNUM = 4, | |
41 | R5_REGNUM = 5, | |
42 | R6_REGNUM = 6, | |
43 | R7_REGNUM = 7, | |
44 | ||
45 | SP_REGNUM = R7_REGNUM, /* Contains address of top of stack */ | |
46 | FP_REGNUM = R6_REGNUM, /* Contains address of executing | |
47 | stack frame */ | |
48 | CCR_REGNUM = 8, /* Contains processor status */ | |
49 | PC_REGNUM = 9, /* Contains program counter */ | |
50 | CYCLE_REGNUM = 10, | |
51 | EXR_REGNUM = 11, | |
52 | INST_REGNUM = 12, | |
53 | TICK_REGNUM = 13, | |
18ad32b5 MS |
54 | MACH_REGNUM = 14, |
55 | MACL_REGNUM = 15, | |
56 | SBR_REGNUM = 16, | |
57 | VBR_REGNUM = 17, | |
dc5c3759 MS |
58 | |
59 | ZERO_REGNUM = 18 | |
60 | }; | |
61 | ||
62 | enum h8_typecodes { | |
63 | OP_NULL, | |
64 | OP_REG, /* Register direct. */ | |
65 | OP_LOWREG, /* Special reg syntax for "bra". */ | |
66 | OP_DISP, /* Register indirect w/displacement. */ | |
67 | /* Note: h8300, h8300h, and h8300s permit only pre-decr and post-incr. */ | |
68 | OP_PREDEC, /* Register indirect w/pre-decrement. */ | |
69 | OP_POSTDEC, /* Register indirect w/post-decrement. */ | |
70 | OP_PREINC, /* Register indirect w/pre-increment. */ | |
71 | OP_POSTINC, /* Register indirect w/post-increment. */ | |
72 | OP_PCREL, /* PC Relative. */ | |
73 | OP_MEM, /* Absolute memory address. */ | |
74 | OP_CCR, /* Condition Code Register. */ | |
75 | OP_IMM, /* Immediate value. */ | |
76 | /*OP_ABS*/ /* Un-used (duplicates op_mem?). */ | |
77 | OP_EXR, /* EXtended control Register. */ | |
78 | OP_SBR, /* Vector Base Register. */ | |
79 | OP_VBR, /* Short-address Base Register. */ | |
80 | OP_MACH, /* Multiply Accumulator - high. */ | |
81 | OP_MACL, /* Multiply Accumulator - low. */ | |
82 | /* FIXME: memory indirect? */ | |
83 | OP_INDEXB, /* Byte index mode */ | |
84 | OP_INDEXW, /* Word index mode */ | |
0ef4c3f8 YS |
85 | OP_INDEXL, /* Long index mode */ |
86 | OP_REG_DEC, /* Register direct. affect address decrement. */ | |
87 | OP_REG_INC, /* Register direct. affect address increment. */ | |
dc5c3759 MS |
88 | }; |
89 | ||
90 | #include "sim-basics.h" | |
dc5c3759 MS |
91 | #include "sim-base.h" |
92 | ||
93 | /* Structure used to describe addressing */ | |
94 | ||
95 | typedef struct | |
96 | { | |
97 | int type; | |
98 | int reg; | |
99 | int literal; | |
100 | } ea_type; | |
101 | ||
102 | /* Struct for instruction decoder. */ | |
103 | typedef struct | |
104 | { | |
105 | ea_type src; | |
106 | ea_type dst; | |
107 | ea_type op3; | |
108 | int opcode; | |
109 | int next_pc; | |
110 | int oldpc; | |
111 | int cycles; | |
112 | #ifdef DEBUG | |
113 | struct h8_opcode *op; | |
114 | #endif | |
115 | } decoded_inst; | |
116 | ||
117 | struct _sim_cpu { | |
118 | unsigned int regs[20]; /* 8 GR's plus ZERO, SBR, and VBR. */ | |
119 | unsigned int pc; | |
120 | ||
121 | int macS; /* MAC Saturating mode */ | |
122 | int macV; /* MAC Overflow */ | |
123 | int macN; /* MAC Negative */ | |
124 | int macZ; /* MAC Zero */ | |
125 | ||
126 | int delayed_branch; | |
127 | char **command_line; /* Pointer to command line arguments. */ | |
128 | ||
129 | unsigned char *memory; | |
dc5c3759 MS |
130 | int mask; |
131 | ||
132 | sim_cpu_base base; | |
133 | }; | |
134 | ||
2ad10cb2 | 135 | struct h8300_sim_state { |
dc5c3759 | 136 | unsigned long memory_size; |
dc5c3759 MS |
137 | #ifdef ADEBUG |
138 | int stats[O_LAST]; | |
139 | #endif | |
dc5c3759 | 140 | }; |
2ad10cb2 | 141 | #define H8300_SIM_STATE(sd) ((struct h8300_sim_state *) STATE_ARCH_DATA (sd)) |
dc5c3759 MS |
142 | |
143 | /* The current state of the processor; registers, memory, etc. */ | |
144 | ||
dc5c3759 MS |
145 | #define cpu_set_pc(CPU, VAL) (((CPU)->pc) = (VAL)) |
146 | #define cpu_get_pc(CPU) (((CPU)->pc)) | |
147 | ||
148 | /* Magic numbers used to distinguish an exit from a breakpoint. */ | |
149 | #define LIBC_EXIT_MAGIC1 0xdead | |
150 | #define LIBC_EXIT_MAGIC2 0xbeef | |
151 | /* Local version of macros for decoding exit status. | |
152 | (included here rather than try to find target version of wait.h) | |
153 | */ | |
f0861129 MS |
154 | #define SIM_WIFEXITED(V) (((V) & 0xff) == 0) |
155 | #define SIM_WIFSTOPPED(V) (!SIM_WIFEXITED (V)) | |
156 | #define SIM_WEXITSTATUS(V) (((V) >> 8) & 0xff) | |
157 | #define SIM_WSTOPSIG(V) ((V) & 0x7f) | |
dc5c3759 MS |
158 | |
159 | #endif /* SIM_MAIN_H */ |