ACPICA: update Intel copyright
[deliverable/linux.git] / drivers / acpi / executer / exresop.c
1
2 /******************************************************************************
3 *
4 * Module Name: exresop - AML Interpreter operand/object resolution
5 *
6 *****************************************************************************/
7
8 /*
9 * Copyright (C) 2000 - 2008, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45 #include <acpi/acpi.h>
46 #include <acpi/amlcode.h>
47 #include <acpi/acparser.h>
48 #include <acpi/acinterp.h>
49 #include <acpi/acnamesp.h>
50
51 #define _COMPONENT ACPI_EXECUTER
52 ACPI_MODULE_NAME("exresop")
53
54 /* Local prototypes */
55 static acpi_status
56 acpi_ex_check_object_type(acpi_object_type type_needed,
57 acpi_object_type this_type, void *object);
58
59 /*******************************************************************************
60 *
61 * FUNCTION: acpi_ex_check_object_type
62 *
63 * PARAMETERS: type_needed Object type needed
64 * this_type Actual object type
65 * Object Object pointer
66 *
67 * RETURN: Status
68 *
69 * DESCRIPTION: Check required type against actual type
70 *
71 ******************************************************************************/
72
73 static acpi_status
74 acpi_ex_check_object_type(acpi_object_type type_needed,
75 acpi_object_type this_type, void *object)
76 {
77 ACPI_FUNCTION_ENTRY();
78
79 if (type_needed == ACPI_TYPE_ANY) {
80
81 /* All types OK, so we don't perform any typechecks */
82
83 return (AE_OK);
84 }
85
86 if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
87 /*
88 * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
89 * objects and thus allow them to be targets. (As per the ACPI
90 * specification, a store to a constant is a noop.)
91 */
92 if ((this_type == ACPI_TYPE_INTEGER) &&
93 (((union acpi_operand_object *)object)->common.
94 flags & AOPOBJ_AML_CONSTANT)) {
95 return (AE_OK);
96 }
97 }
98
99 if (type_needed != this_type) {
100 ACPI_ERROR((AE_INFO,
101 "Needed type [%s], found [%s] %p",
102 acpi_ut_get_type_name(type_needed),
103 acpi_ut_get_type_name(this_type), object));
104
105 return (AE_AML_OPERAND_TYPE);
106 }
107
108 return (AE_OK);
109 }
110
111 /*******************************************************************************
112 *
113 * FUNCTION: acpi_ex_resolve_operands
114 *
115 * PARAMETERS: Opcode - Opcode being interpreted
116 * stack_ptr - Pointer to the operand stack to be
117 * resolved
118 * walk_state - Current state
119 *
120 * RETURN: Status
121 *
122 * DESCRIPTION: Convert multiple input operands to the types required by the
123 * target operator.
124 *
125 * Each 5-bit group in arg_types represents one required
126 * operand and indicates the required Type. The corresponding operand
127 * will be converted to the required type if possible, otherwise we
128 * abort with an exception.
129 *
130 ******************************************************************************/
131
132 acpi_status
133 acpi_ex_resolve_operands(u16 opcode,
134 union acpi_operand_object ** stack_ptr,
135 struct acpi_walk_state * walk_state)
136 {
137 union acpi_operand_object *obj_desc;
138 acpi_status status = AE_OK;
139 u8 object_type;
140 u32 arg_types;
141 const struct acpi_opcode_info *op_info;
142 u32 this_arg_type;
143 acpi_object_type type_needed;
144 u16 target_op = 0;
145
146 ACPI_FUNCTION_TRACE_U32(ex_resolve_operands, opcode);
147
148 op_info = acpi_ps_get_opcode_info(opcode);
149 if (op_info->class == AML_CLASS_UNKNOWN) {
150 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
151 }
152
153 arg_types = op_info->runtime_args;
154 if (arg_types == ARGI_INVALID_OPCODE) {
155 ACPI_ERROR((AE_INFO, "Unknown AML opcode %X", opcode));
156
157 return_ACPI_STATUS(AE_AML_INTERNAL);
158 }
159
160 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
161 "Opcode %X [%s] RequiredOperandTypes=%8.8X\n",
162 opcode, op_info->name, arg_types));
163
164 /*
165 * Normal exit is with (arg_types == 0) at end of argument list.
166 * Function will return an exception from within the loop upon
167 * finding an entry which is not (or cannot be converted
168 * to) the required type; if stack underflows; or upon
169 * finding a NULL stack entry (which should not happen).
170 */
171 while (GET_CURRENT_ARG_TYPE(arg_types)) {
172 if (!stack_ptr || !*stack_ptr) {
173 ACPI_ERROR((AE_INFO, "Null stack entry at %p",
174 stack_ptr));
175
176 return_ACPI_STATUS(AE_AML_INTERNAL);
177 }
178
179 /* Extract useful items */
180
181 obj_desc = *stack_ptr;
182
183 /* Decode the descriptor type */
184
185 switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc)) {
186 case ACPI_DESC_TYPE_NAMED:
187
188 /* Namespace Node */
189
190 object_type =
191 ((struct acpi_namespace_node *)obj_desc)->type;
192
193 /*
194 * Resolve an alias object. The construction of these objects
195 * guarantees that there is only one level of alias indirection;
196 * thus, the attached object is always the aliased namespace node
197 */
198 if (object_type == ACPI_TYPE_LOCAL_ALIAS) {
199 obj_desc =
200 acpi_ns_get_attached_object((struct
201 acpi_namespace_node
202 *)obj_desc);
203 *stack_ptr = obj_desc;
204 object_type =
205 ((struct acpi_namespace_node *)obj_desc)->
206 type;
207 }
208 break;
209
210 case ACPI_DESC_TYPE_OPERAND:
211
212 /* ACPI internal object */
213
214 object_type = ACPI_GET_OBJECT_TYPE(obj_desc);
215
216 /* Check for bad acpi_object_type */
217
218 if (!acpi_ut_valid_object_type(object_type)) {
219 ACPI_ERROR((AE_INFO,
220 "Bad operand object type [%X]",
221 object_type));
222
223 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
224 }
225
226 if (object_type == (u8) ACPI_TYPE_LOCAL_REFERENCE) {
227
228 /* Decode the Reference */
229
230 op_info = acpi_ps_get_opcode_info(opcode);
231 if (op_info->class == AML_CLASS_UNKNOWN) {
232 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
233 }
234
235 switch (obj_desc->reference.opcode) {
236 case AML_DEBUG_OP:
237 target_op = AML_DEBUG_OP;
238
239 /*lint -fallthrough */
240
241 case AML_INDEX_OP:
242 case AML_REF_OF_OP:
243 case AML_ARG_OP:
244 case AML_LOCAL_OP:
245 case AML_LOAD_OP: /* ddb_handle from LOAD_OP or LOAD_TABLE_OP */
246 case AML_INT_NAMEPATH_OP: /* Reference to a named object */
247
248 ACPI_DEBUG_ONLY_MEMBERS(ACPI_DEBUG_PRINT
249 ((ACPI_DB_EXEC,
250 "Operand is a Reference, RefOpcode [%s]\n",
251 (acpi_ps_get_opcode_info
252 (obj_desc->
253 reference.
254 opcode))->
255 name)));
256 break;
257
258 default:
259 ACPI_ERROR((AE_INFO,
260 "Operand is a Reference, Unknown Reference Opcode: %X",
261 obj_desc->reference.
262 opcode));
263
264 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
265 }
266 }
267 break;
268
269 default:
270
271 /* Invalid descriptor */
272
273 ACPI_ERROR((AE_INFO,
274 "Invalid descriptor %p [%s]",
275 obj_desc,
276 acpi_ut_get_descriptor_name(obj_desc)));
277
278 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
279 }
280
281 /* Get one argument type, point to the next */
282
283 this_arg_type = GET_CURRENT_ARG_TYPE(arg_types);
284 INCREMENT_ARG_LIST(arg_types);
285
286 /*
287 * Handle cases where the object does not need to be
288 * resolved to a value
289 */
290 switch (this_arg_type) {
291 case ARGI_REF_OR_STRING: /* Can be a String or Reference */
292
293 if ((ACPI_GET_DESCRIPTOR_TYPE(obj_desc) ==
294 ACPI_DESC_TYPE_OPERAND)
295 && (ACPI_GET_OBJECT_TYPE(obj_desc) ==
296 ACPI_TYPE_STRING)) {
297 /*
298 * String found - the string references a named object and
299 * must be resolved to a node
300 */
301 goto next_operand;
302 }
303
304 /*
305 * Else not a string - fall through to the normal Reference
306 * case below
307 */
308 /*lint -fallthrough */
309
310 case ARGI_REFERENCE: /* References: */
311 case ARGI_INTEGER_REF:
312 case ARGI_OBJECT_REF:
313 case ARGI_DEVICE_REF:
314 case ARGI_TARGETREF: /* Allows implicit conversion rules before store */
315 case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */
316 case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */
317
318 /*
319 * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
320 * A Namespace Node is OK as-is
321 */
322 if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) ==
323 ACPI_DESC_TYPE_NAMED) {
324 goto next_operand;
325 }
326
327 status =
328 acpi_ex_check_object_type(ACPI_TYPE_LOCAL_REFERENCE,
329 object_type, obj_desc);
330 if (ACPI_FAILURE(status)) {
331 return_ACPI_STATUS(status);
332 }
333 goto next_operand;
334
335 case ARGI_DATAREFOBJ: /* Store operator only */
336
337 /*
338 * We don't want to resolve index_op reference objects during
339 * a store because this would be an implicit de_ref_of operation.
340 * Instead, we just want to store the reference object.
341 * -- All others must be resolved below.
342 */
343 if ((opcode == AML_STORE_OP) &&
344 (ACPI_GET_OBJECT_TYPE(*stack_ptr) ==
345 ACPI_TYPE_LOCAL_REFERENCE)
346 && ((*stack_ptr)->reference.opcode == AML_INDEX_OP)) {
347 goto next_operand;
348 }
349 break;
350
351 default:
352 /* All cases covered above */
353 break;
354 }
355
356 /*
357 * Resolve this object to a value
358 */
359 status = acpi_ex_resolve_to_value(stack_ptr, walk_state);
360 if (ACPI_FAILURE(status)) {
361 return_ACPI_STATUS(status);
362 }
363
364 /* Get the resolved object */
365
366 obj_desc = *stack_ptr;
367
368 /*
369 * Check the resulting object (value) type
370 */
371 switch (this_arg_type) {
372 /*
373 * For the simple cases, only one type of resolved object
374 * is allowed
375 */
376 case ARGI_MUTEX:
377
378 /* Need an operand of type ACPI_TYPE_MUTEX */
379
380 type_needed = ACPI_TYPE_MUTEX;
381 break;
382
383 case ARGI_EVENT:
384
385 /* Need an operand of type ACPI_TYPE_EVENT */
386
387 type_needed = ACPI_TYPE_EVENT;
388 break;
389
390 case ARGI_PACKAGE: /* Package */
391
392 /* Need an operand of type ACPI_TYPE_PACKAGE */
393
394 type_needed = ACPI_TYPE_PACKAGE;
395 break;
396
397 case ARGI_ANYTYPE:
398
399 /* Any operand type will do */
400
401 type_needed = ACPI_TYPE_ANY;
402 break;
403
404 case ARGI_DDBHANDLE:
405
406 /* Need an operand of type ACPI_TYPE_DDB_HANDLE */
407
408 type_needed = ACPI_TYPE_LOCAL_REFERENCE;
409 break;
410
411 /*
412 * The more complex cases allow multiple resolved object types
413 */
414 case ARGI_INTEGER:
415
416 /*
417 * Need an operand of type ACPI_TYPE_INTEGER,
418 * But we can implicitly convert from a STRING or BUFFER
419 * Aka - "Implicit Source Operand Conversion"
420 */
421 status =
422 acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16);
423 if (ACPI_FAILURE(status)) {
424 if (status == AE_TYPE) {
425 ACPI_ERROR((AE_INFO,
426 "Needed [Integer/String/Buffer], found [%s] %p",
427 acpi_ut_get_object_type_name
428 (obj_desc), obj_desc));
429
430 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
431 }
432
433 return_ACPI_STATUS(status);
434 }
435
436 if (obj_desc != *stack_ptr) {
437 acpi_ut_remove_reference(obj_desc);
438 }
439 goto next_operand;
440
441 case ARGI_BUFFER:
442
443 /*
444 * Need an operand of type ACPI_TYPE_BUFFER,
445 * But we can implicitly convert from a STRING or INTEGER
446 * Aka - "Implicit Source Operand Conversion"
447 */
448 status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr);
449 if (ACPI_FAILURE(status)) {
450 if (status == AE_TYPE) {
451 ACPI_ERROR((AE_INFO,
452 "Needed [Integer/String/Buffer], found [%s] %p",
453 acpi_ut_get_object_type_name
454 (obj_desc), obj_desc));
455
456 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
457 }
458
459 return_ACPI_STATUS(status);
460 }
461
462 if (obj_desc != *stack_ptr) {
463 acpi_ut_remove_reference(obj_desc);
464 }
465 goto next_operand;
466
467 case ARGI_STRING:
468
469 /*
470 * Need an operand of type ACPI_TYPE_STRING,
471 * But we can implicitly convert from a BUFFER or INTEGER
472 * Aka - "Implicit Source Operand Conversion"
473 */
474 status = acpi_ex_convert_to_string(obj_desc, stack_ptr,
475 ACPI_IMPLICIT_CONVERT_HEX);
476 if (ACPI_FAILURE(status)) {
477 if (status == AE_TYPE) {
478 ACPI_ERROR((AE_INFO,
479 "Needed [Integer/String/Buffer], found [%s] %p",
480 acpi_ut_get_object_type_name
481 (obj_desc), obj_desc));
482
483 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
484 }
485
486 return_ACPI_STATUS(status);
487 }
488
489 if (obj_desc != *stack_ptr) {
490 acpi_ut_remove_reference(obj_desc);
491 }
492 goto next_operand;
493
494 case ARGI_COMPUTEDATA:
495
496 /* Need an operand of type INTEGER, STRING or BUFFER */
497
498 switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
499 case ACPI_TYPE_INTEGER:
500 case ACPI_TYPE_STRING:
501 case ACPI_TYPE_BUFFER:
502
503 /* Valid operand */
504 break;
505
506 default:
507 ACPI_ERROR((AE_INFO,
508 "Needed [Integer/String/Buffer], found [%s] %p",
509 acpi_ut_get_object_type_name
510 (obj_desc), obj_desc));
511
512 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
513 }
514 goto next_operand;
515
516 case ARGI_BUFFER_OR_STRING:
517
518 /* Need an operand of type STRING or BUFFER */
519
520 switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
521 case ACPI_TYPE_STRING:
522 case ACPI_TYPE_BUFFER:
523
524 /* Valid operand */
525 break;
526
527 case ACPI_TYPE_INTEGER:
528
529 /* Highest priority conversion is to type Buffer */
530
531 status =
532 acpi_ex_convert_to_buffer(obj_desc,
533 stack_ptr);
534 if (ACPI_FAILURE(status)) {
535 return_ACPI_STATUS(status);
536 }
537
538 if (obj_desc != *stack_ptr) {
539 acpi_ut_remove_reference(obj_desc);
540 }
541 break;
542
543 default:
544 ACPI_ERROR((AE_INFO,
545 "Needed [Integer/String/Buffer], found [%s] %p",
546 acpi_ut_get_object_type_name
547 (obj_desc), obj_desc));
548
549 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
550 }
551 goto next_operand;
552
553 case ARGI_DATAOBJECT:
554 /*
555 * ARGI_DATAOBJECT is only used by the size_of operator.
556 * Need a buffer, string, package, or ref_of reference.
557 *
558 * The only reference allowed here is a direct reference to
559 * a namespace node.
560 */
561 switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
562 case ACPI_TYPE_PACKAGE:
563 case ACPI_TYPE_STRING:
564 case ACPI_TYPE_BUFFER:
565 case ACPI_TYPE_LOCAL_REFERENCE:
566
567 /* Valid operand */
568 break;
569
570 default:
571 ACPI_ERROR((AE_INFO,
572 "Needed [Buffer/String/Package/Reference], found [%s] %p",
573 acpi_ut_get_object_type_name
574 (obj_desc), obj_desc));
575
576 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
577 }
578 goto next_operand;
579
580 case ARGI_COMPLEXOBJ:
581
582 /* Need a buffer or package or (ACPI 2.0) String */
583
584 switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
585 case ACPI_TYPE_PACKAGE:
586 case ACPI_TYPE_STRING:
587 case ACPI_TYPE_BUFFER:
588
589 /* Valid operand */
590 break;
591
592 default:
593 ACPI_ERROR((AE_INFO,
594 "Needed [Buffer/String/Package], found [%s] %p",
595 acpi_ut_get_object_type_name
596 (obj_desc), obj_desc));
597
598 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
599 }
600 goto next_operand;
601
602 case ARGI_REGION_OR_BUFFER: /* Used by Load() only */
603
604 /* Need an operand of type REGION or a BUFFER (which could be a resolved region field) */
605
606 switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
607 case ACPI_TYPE_BUFFER:
608 case ACPI_TYPE_REGION:
609
610 /* Valid operand */
611 break;
612
613 default:
614 ACPI_ERROR((AE_INFO,
615 "Needed [Region/Buffer], found [%s] %p",
616 acpi_ut_get_object_type_name
617 (obj_desc), obj_desc));
618
619 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
620 }
621 goto next_operand;
622
623 case ARGI_DATAREFOBJ:
624
625 /* Used by the Store() operator only */
626
627 switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
628 case ACPI_TYPE_INTEGER:
629 case ACPI_TYPE_PACKAGE:
630 case ACPI_TYPE_STRING:
631 case ACPI_TYPE_BUFFER:
632 case ACPI_TYPE_BUFFER_FIELD:
633 case ACPI_TYPE_LOCAL_REFERENCE:
634 case ACPI_TYPE_LOCAL_REGION_FIELD:
635 case ACPI_TYPE_LOCAL_BANK_FIELD:
636 case ACPI_TYPE_LOCAL_INDEX_FIELD:
637 case ACPI_TYPE_DDB_HANDLE:
638
639 /* Valid operand */
640 break;
641
642 default:
643
644 if (acpi_gbl_enable_interpreter_slack) {
645 /*
646 * Enable original behavior of Store(), allowing any and all
647 * objects as the source operand. The ACPI spec does not
648 * allow this, however.
649 */
650 break;
651 }
652
653 if (target_op == AML_DEBUG_OP) {
654
655 /* Allow store of any object to the Debug object */
656
657 break;
658 }
659
660 ACPI_ERROR((AE_INFO,
661 "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p",
662 acpi_ut_get_object_type_name
663 (obj_desc), obj_desc));
664
665 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
666 }
667 goto next_operand;
668
669 default:
670
671 /* Unknown type */
672
673 ACPI_ERROR((AE_INFO,
674 "Internal - Unknown ARGI (required operand) type %X",
675 this_arg_type));
676
677 return_ACPI_STATUS(AE_BAD_PARAMETER);
678 }
679
680 /*
681 * Make sure that the original object was resolved to the
682 * required object type (Simple cases only).
683 */
684 status = acpi_ex_check_object_type(type_needed,
685 ACPI_GET_OBJECT_TYPE
686 (*stack_ptr), *stack_ptr);
687 if (ACPI_FAILURE(status)) {
688 return_ACPI_STATUS(status);
689 }
690
691 next_operand:
692 /*
693 * If more operands needed, decrement stack_ptr to point
694 * to next operand on stack
695 */
696 if (GET_CURRENT_ARG_TYPE(arg_types)) {
697 stack_ptr--;
698 }
699 }
700
701 return_ACPI_STATUS(status);
702 }
This page took 0.04547 seconds and 5 git commands to generate.