projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge Linux 2.6.23
[deliverable/linux.git] / drivers / ata / pata_amd.c
1 /*
2 * pata_amd.c - AMD PATA for new ATA layer
3 * (C) 2005-2006 Red Hat Inc
4 * Alan Cox <alan@redhat.com>
5 *
6 * Based on pata-sil680. Errata information is taken from data sheets
7 * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
8 * claimed by sata-nv.c.
9 *
10 * TODO:
11 * Variable system clock when/if it makes sense
12 * Power management on ports
13 *
14 *
15 * Documentation publically available.
16 */
17
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/pci.h>
21 #include <linux/init.h>
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <scsi/scsi_host.h>
25 #include <linux/libata.h>
26
27 #define DRV_NAME "pata_amd"
28 #define DRV_VERSION "0.3.9"
29
30 /**
31 * timing_setup - shared timing computation and load
32 * @ap: ATA port being set up
33 * @adev: drive being configured
34 * @offset: port offset
35 * @speed: target speed
36 * @clock: clock multiplier (number of times 33MHz for this part)
37 *
38 * Perform the actual timing set up for Nvidia or AMD PATA devices.
39 * The actual devices vary so they all call into this helper function
40 * providing the clock multipler and offset (because AMD and Nvidia put
41 * the ports at different locations).
42 */
43
44 static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock)
45 {
46 static const unsigned char amd_cyc2udma[] = {
47 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7
48 };
49
50 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
51 struct ata_device *peer = ata_dev_pair(adev);
52 int dn = ap->port_no * 2 + adev->devno;
53 struct ata_timing at, apeer;
54 int T, UT;
55 const int amd_clock = 33333; /* KHz. */
56 u8 t;
57
58 T = 1000000000 / amd_clock;
59 UT = T / min_t(int, max_t(int, clock, 1), 2);
60
61 if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
62 dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
63 return;
64 }
65
66 if (peer) {
67 /* This may be over conservative */
68 if (peer->dma_mode) {
69 ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT);
70 ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT);
71 }
72 ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT);
73 ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT);
74 }
75
76 if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1;
77 if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15;
78
79 /*
80 * Now do the setup work
81 */
82
83 /* Configure the address set up timing */
84 pci_read_config_byte(pdev, offset + 0x0C, &t);
85 t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
86 pci_write_config_byte(pdev, offset + 0x0C , t);
87
88 /* Configure the 8bit I/O timing */
89 pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
90 ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
91
92 /* Drive timing */
93 pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
94 ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
95
96 switch (clock) {
97 case 1:
98 t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
99 break;
100
101 case 2:
102 t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
103 break;
104
105 case 3:
106 t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
107 break;
108
109 case 4:
110 t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
111 break;
112
113 default:
114 return;
115 }
116
117 /* UDMA timing */
118 pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
119 }
120
121 /**
122 * amd_probe_init - perform reset handling
123 * @ap: ATA port
124 * @deadline: deadline jiffies for the operation
125 *
126 * Reset sequence checking enable bits to see which ports are
127 * active.
128 */
129
130 static int amd_pre_reset(struct ata_port *ap, unsigned long deadline)
131 {
132 static const struct pci_bits amd_enable_bits[] = {
133 { 0x40, 1, 0x02, 0x02 },
134 { 0x40, 1, 0x01, 0x01 }
135 };
136
137 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
138
139 if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
140 return -ENOENT;
141
142 return ata_std_prereset(ap, deadline);
143 }
144
145 static void amd_error_handler(struct ata_port *ap)
146 {
147 return ata_bmdma_drive_eh(ap, amd_pre_reset,
148 ata_std_softreset, NULL,
149 ata_std_postreset);
150 }
151
152 static int amd_cable_detect(struct ata_port *ap)
153 {
154 static const u32 bitmask[2] = {0x03, 0x0C};
155 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
156 u8 ata66;
157
158 pci_read_config_byte(pdev, 0x42, &ata66);
159 if (ata66 & bitmask[ap->port_no])
160 return ATA_CBL_PATA80;
161 return ATA_CBL_PATA40;
162 }
163
164 /**
165 * amd33_set_piomode - set initial PIO mode data
166 * @ap: ATA interface
167 * @adev: ATA device
168 *
169 * Program the AMD registers for PIO mode.
170 */
171
172 static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
173 {
174 timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
175 }
176
177 static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
178 {
179 timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
180 }
181
182 static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
183 {
184 timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
185 }
186
187 static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
188 {
189 timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
190 }
191
192 /**
193 * amd33_set_dmamode - set initial DMA mode data
194 * @ap: ATA interface
195 * @adev: ATA device
196 *
197 * Program the MWDMA/UDMA modes for the AMD and Nvidia
198 * chipset.
199 */
200
201 static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev)
202 {
203 timing_setup(ap, adev, 0x40, adev->dma_mode, 1);
204 }
205
206 static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev)
207 {
208 timing_setup(ap, adev, 0x40, adev->dma_mode, 2);
209 }
210
211 static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev)
212 {
213 timing_setup(ap, adev, 0x40, adev->dma_mode, 3);
214 }
215
216 static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
217 {
218 timing_setup(ap, adev, 0x40, adev->dma_mode, 4);
219 }
220
221
222 /**
223 * nv_probe_init - cable detection
224 * @ap: ATA port
225 *
226 * Perform cable detection. The BIOS stores this in PCI config
227 * space for us.
228 */
229
230 static int nv_pre_reset(struct ata_port *ap, unsigned long deadline)
231 {
232 static const struct pci_bits nv_enable_bits[] = {
233 { 0x50, 1, 0x02, 0x02 },
234 { 0x50, 1, 0x01, 0x01 }
235 };
236
237 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
238
239 if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
240 return -ENOENT;
241
242 return ata_std_prereset(ap, deadline);
243 }
244
245 static void nv_error_handler(struct ata_port *ap)
246 {
247 ata_bmdma_drive_eh(ap, nv_pre_reset,
248 ata_std_softreset, NULL,
249 ata_std_postreset);
250 }
251
252 static int nv_cable_detect(struct ata_port *ap)
253 {
254 static const u8 bitmask[2] = {0x03, 0x0C};
255 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
256 u8 ata66;
257 u16 udma;
258 int cbl;
259
260 pci_read_config_byte(pdev, 0x52, &ata66);
261 if (ata66 & bitmask[ap->port_no])
262 cbl = ATA_CBL_PATA80;
263 else
264 cbl = ATA_CBL_PATA40;
265
266 /* We now have to double check because the Nvidia boxes BIOS
267 doesn't always set the cable bits but does set mode bits */
268 pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
269 if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
270 cbl = ATA_CBL_PATA80;
271 return cbl;
272 }
273
274 /**
275 * nv100_set_piomode - set initial PIO mode data
276 * @ap: ATA interface
277 * @adev: ATA device
278 *
279 * Program the AMD registers for PIO mode.
280 */
281
282 static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev)
283 {
284 timing_setup(ap, adev, 0x50, adev->pio_mode, 3);
285 }
286
287 static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev)
288 {
289 timing_setup(ap, adev, 0x50, adev->pio_mode, 4);
290 }
291
292 /**
293 * nv100_set_dmamode - set initial DMA mode data
294 * @ap: ATA interface
295 * @adev: ATA device
296 *
297 * Program the MWDMA/UDMA modes for the AMD and Nvidia
298 * chipset.
299 */
300
301 static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev)
302 {
303 timing_setup(ap, adev, 0x50, adev->dma_mode, 3);
304 }
305
306 static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
307 {
308 timing_setup(ap, adev, 0x50, adev->dma_mode, 4);
309 }
310
311 static struct scsi_host_template amd_sht = {
312 .module = THIS_MODULE,
313 .name = DRV_NAME,
314 .ioctl = ata_scsi_ioctl,
315 .queuecommand = ata_scsi_queuecmd,
316 .can_queue = ATA_DEF_QUEUE,
317 .this_id = ATA_SHT_THIS_ID,
318 .sg_tablesize = LIBATA_MAX_PRD,
319 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
320 .emulated = ATA_SHT_EMULATED,
321 .use_clustering = ATA_SHT_USE_CLUSTERING,
322 .proc_name = DRV_NAME,
323 .dma_boundary = ATA_DMA_BOUNDARY,
324 .slave_configure = ata_scsi_slave_config,
325 .slave_destroy = ata_scsi_slave_destroy,
326 .bios_param = ata_std_bios_param,
327 };
328
329 static struct ata_port_operations amd33_port_ops = {
330 .port_disable = ata_port_disable,
331 .set_piomode = amd33_set_piomode,
332 .set_dmamode = amd33_set_dmamode,
333 .mode_filter = ata_pci_default_filter,
334 .tf_load = ata_tf_load,
335 .tf_read = ata_tf_read,
336 .check_status = ata_check_status,
337 .exec_command = ata_exec_command,
338 .dev_select = ata_std_dev_select,
339
340 .freeze = ata_bmdma_freeze,
341 .thaw = ata_bmdma_thaw,
342 .error_handler = amd_error_handler,
343 .post_internal_cmd = ata_bmdma_post_internal_cmd,
344 .cable_detect = ata_cable_40wire,
345
346 .bmdma_setup = ata_bmdma_setup,
347 .bmdma_start = ata_bmdma_start,
348 .bmdma_stop = ata_bmdma_stop,
349 .bmdma_status = ata_bmdma_status,
350
351 .qc_prep = ata_qc_prep,
352 .qc_issue = ata_qc_issue_prot,
353
354 .data_xfer = ata_data_xfer,
355
356 .irq_handler = ata_interrupt,
357 .irq_clear = ata_bmdma_irq_clear,
358 .irq_on = ata_irq_on,
359 .irq_ack = ata_irq_ack,
360
361 .port_start = ata_port_start,
362 };
363
364 static struct ata_port_operations amd66_port_ops = {
365 .port_disable = ata_port_disable,
366 .set_piomode = amd66_set_piomode,
367 .set_dmamode = amd66_set_dmamode,
368 .mode_filter = ata_pci_default_filter,
369 .tf_load = ata_tf_load,
370 .tf_read = ata_tf_read,
371 .check_status = ata_check_status,
372 .exec_command = ata_exec_command,
373 .dev_select = ata_std_dev_select,
374
375 .freeze = ata_bmdma_freeze,
376 .thaw = ata_bmdma_thaw,
377 .error_handler = amd_error_handler,
378 .post_internal_cmd = ata_bmdma_post_internal_cmd,
379 .cable_detect = ata_cable_unknown,
380
381 .bmdma_setup = ata_bmdma_setup,
382 .bmdma_start = ata_bmdma_start,
383 .bmdma_stop = ata_bmdma_stop,
384 .bmdma_status = ata_bmdma_status,
385
386 .qc_prep = ata_qc_prep,
387 .qc_issue = ata_qc_issue_prot,
388
389 .data_xfer = ata_data_xfer,
390
391 .irq_handler = ata_interrupt,
392 .irq_clear = ata_bmdma_irq_clear,
393 .irq_on = ata_irq_on,
394 .irq_ack = ata_irq_ack,
395
396 .port_start = ata_port_start,
397 };
398
399 static struct ata_port_operations amd100_port_ops = {
400 .port_disable = ata_port_disable,
401 .set_piomode = amd100_set_piomode,
402 .set_dmamode = amd100_set_dmamode,
403 .mode_filter = ata_pci_default_filter,
404 .tf_load = ata_tf_load,
405 .tf_read = ata_tf_read,
406 .check_status = ata_check_status,
407 .exec_command = ata_exec_command,
408 .dev_select = ata_std_dev_select,
409
410 .freeze = ata_bmdma_freeze,
411 .thaw = ata_bmdma_thaw,
412 .error_handler = amd_error_handler,
413 .post_internal_cmd = ata_bmdma_post_internal_cmd,
414 .cable_detect = ata_cable_unknown,
415
416 .bmdma_setup = ata_bmdma_setup,
417 .bmdma_start = ata_bmdma_start,
418 .bmdma_stop = ata_bmdma_stop,
419 .bmdma_status = ata_bmdma_status,
420
421 .qc_prep = ata_qc_prep,
422 .qc_issue = ata_qc_issue_prot,
423
424 .data_xfer = ata_data_xfer,
425
426 .irq_handler = ata_interrupt,
427 .irq_clear = ata_bmdma_irq_clear,
428 .irq_on = ata_irq_on,
429 .irq_ack = ata_irq_ack,
430
431 .port_start = ata_port_start,
432 };
433
434 static struct ata_port_operations amd133_port_ops = {
435 .port_disable = ata_port_disable,
436 .set_piomode = amd133_set_piomode,
437 .set_dmamode = amd133_set_dmamode,
438 .mode_filter = ata_pci_default_filter,
439 .tf_load = ata_tf_load,
440 .tf_read = ata_tf_read,
441 .check_status = ata_check_status,
442 .exec_command = ata_exec_command,
443 .dev_select = ata_std_dev_select,
444
445 .freeze = ata_bmdma_freeze,
446 .thaw = ata_bmdma_thaw,
447 .error_handler = amd_error_handler,
448 .post_internal_cmd = ata_bmdma_post_internal_cmd,
449 .cable_detect = amd_cable_detect,
450
451 .bmdma_setup = ata_bmdma_setup,
452 .bmdma_start = ata_bmdma_start,
453 .bmdma_stop = ata_bmdma_stop,
454 .bmdma_status = ata_bmdma_status,
455
456 .qc_prep = ata_qc_prep,
457 .qc_issue = ata_qc_issue_prot,
458
459 .data_xfer = ata_data_xfer,
460
461 .irq_handler = ata_interrupt,
462 .irq_clear = ata_bmdma_irq_clear,
463 .irq_on = ata_irq_on,
464 .irq_ack = ata_irq_ack,
465
466 .port_start = ata_port_start,
467 };
468
469 static struct ata_port_operations nv100_port_ops = {
470 .port_disable = ata_port_disable,
471 .set_piomode = nv100_set_piomode,
472 .set_dmamode = nv100_set_dmamode,
473 .mode_filter = ata_pci_default_filter,
474 .tf_load = ata_tf_load,
475 .tf_read = ata_tf_read,
476 .check_status = ata_check_status,
477 .exec_command = ata_exec_command,
478 .dev_select = ata_std_dev_select,
479
480 .freeze = ata_bmdma_freeze,
481 .thaw = ata_bmdma_thaw,
482 .error_handler = nv_error_handler,
483 .post_internal_cmd = ata_bmdma_post_internal_cmd,
484 .cable_detect = nv_cable_detect,
485
486 .bmdma_setup = ata_bmdma_setup,
487 .bmdma_start = ata_bmdma_start,
488 .bmdma_stop = ata_bmdma_stop,
489 .bmdma_status = ata_bmdma_status,
490
491 .qc_prep = ata_qc_prep,
492 .qc_issue = ata_qc_issue_prot,
493
494 .data_xfer = ata_data_xfer,
495
496 .irq_handler = ata_interrupt,
497 .irq_clear = ata_bmdma_irq_clear,
498 .irq_on = ata_irq_on,
499 .irq_ack = ata_irq_ack,
500
501 .port_start = ata_port_start,
502 };
503
504 static struct ata_port_operations nv133_port_ops = {
505 .port_disable = ata_port_disable,
506 .set_piomode = nv133_set_piomode,
507 .set_dmamode = nv133_set_dmamode,
508 .mode_filter = ata_pci_default_filter,
509 .tf_load = ata_tf_load,
510 .tf_read = ata_tf_read,
511 .check_status = ata_check_status,
512 .exec_command = ata_exec_command,
513 .dev_select = ata_std_dev_select,
514
515 .freeze = ata_bmdma_freeze,
516 .thaw = ata_bmdma_thaw,
517 .error_handler = nv_error_handler,
518 .post_internal_cmd = ata_bmdma_post_internal_cmd,
519 .cable_detect = nv_cable_detect,
520
521 .bmdma_setup = ata_bmdma_setup,
522 .bmdma_start = ata_bmdma_start,
523 .bmdma_stop = ata_bmdma_stop,
524 .bmdma_status = ata_bmdma_status,
525
526 .qc_prep = ata_qc_prep,
527 .qc_issue = ata_qc_issue_prot,
528
529 .data_xfer = ata_data_xfer,
530
531 .irq_handler = ata_interrupt,
532 .irq_clear = ata_bmdma_irq_clear,
533 .irq_on = ata_irq_on,
534 .irq_ack = ata_irq_ack,
535
536 .port_start = ata_port_start,
537 };
538
539 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
540 {
541 static const struct ata_port_info info[10] = {
542 { /* 0: AMD 7401 */
543 .sht = &amd_sht,
544 .flags = ATA_FLAG_SLAVE_POSS,
545 .pio_mask = 0x1f,
546 .mwdma_mask = 0x07, /* No SWDMA */
547 .udma_mask = 0x07, /* UDMA 33 */
548 .port_ops = &amd33_port_ops
549 },
550 { /* 1: Early AMD7409 - no swdma */
551 .sht = &amd_sht,
552 .flags = ATA_FLAG_SLAVE_POSS,
553 .pio_mask = 0x1f,
554 .mwdma_mask = 0x07,
555 .udma_mask = ATA_UDMA4, /* UDMA 66 */
556 .port_ops = &amd66_port_ops
557 },
558 { /* 2: AMD 7409, no swdma errata */
559 .sht = &amd_sht,
560 .flags = ATA_FLAG_SLAVE_POSS,
561 .pio_mask = 0x1f,
562 .mwdma_mask = 0x07,
563 .udma_mask = ATA_UDMA4, /* UDMA 66 */
564 .port_ops = &amd66_port_ops
565 },
566 { /* 3: AMD 7411 */
567 .sht = &amd_sht,
568 .flags = ATA_FLAG_SLAVE_POSS,
569 .pio_mask = 0x1f,
570 .mwdma_mask = 0x07,
571 .udma_mask = ATA_UDMA5, /* UDMA 100 */
572 .port_ops = &amd100_port_ops
573 },
574 { /* 4: AMD 7441 */
575 .sht = &amd_sht,
576 .flags = ATA_FLAG_SLAVE_POSS,
577 .pio_mask = 0x1f,
578 .mwdma_mask = 0x07,
579 .udma_mask = ATA_UDMA5, /* UDMA 100 */
580 .port_ops = &amd100_port_ops
581 },
582 { /* 5: AMD 8111*/
583 .sht = &amd_sht,
584 .flags = ATA_FLAG_SLAVE_POSS,
585 .pio_mask = 0x1f,
586 .mwdma_mask = 0x07,
587 .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */
588 .port_ops = &amd133_port_ops
589 },
590 { /* 6: AMD 8111 UDMA 100 (Serenade) */
591 .sht = &amd_sht,
592 .flags = ATA_FLAG_SLAVE_POSS,
593 .pio_mask = 0x1f,
594 .mwdma_mask = 0x07,
595 .udma_mask = ATA_UDMA5, /* UDMA 100, no swdma */
596 .port_ops = &amd133_port_ops
597 },
598 { /* 7: Nvidia Nforce */
599 .sht = &amd_sht,
600 .flags = ATA_FLAG_SLAVE_POSS,
601 .pio_mask = 0x1f,
602 .mwdma_mask = 0x07,
603 .udma_mask = ATA_UDMA5, /* UDMA 100 */
604 .port_ops = &nv100_port_ops
605 },
606 { /* 8: Nvidia Nforce2 and later */
607 .sht = &amd_sht,
608 .flags = ATA_FLAG_SLAVE_POSS,
609 .pio_mask = 0x1f,
610 .mwdma_mask = 0x07,
611 .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */
612 .port_ops = &nv133_port_ops
613 },
614 { /* 9: AMD CS5536 (Geode companion) */
615 .sht = &amd_sht,
616 .flags = ATA_FLAG_SLAVE_POSS,
617 .pio_mask = 0x1f,
618 .mwdma_mask = 0x07,
619 .udma_mask = ATA_UDMA5, /* UDMA 100 */
620 .port_ops = &amd100_port_ops
621 }
622 };
623 const struct ata_port_info *ppi[] = { NULL, NULL };
624 static int printed_version;
625 int type = id->driver_data;
626 u8 fifo;
627
628 if (!printed_version++)
629 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
630
631 pci_read_config_byte(pdev, 0x41, &fifo);
632
633 /* Check for AMD7409 without swdma errata and if found adjust type */
634 if (type == 1 && pdev->revision > 0x7)
635 type = 2;
636
637 /* Check for AMD7411 */
638 if (type == 3)
639 /* FIFO is broken */
640 pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
641 else
642 pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
643
644 /* Serenade ? */
645 if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
646 pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
647 type = 6; /* UDMA 100 only */
648
649 if (type < 3)
650 ata_pci_clear_simplex(pdev);
651
652 /* And fire it up */
653 ppi[0] = &info[type];
654 return ata_pci_init_one(pdev, ppi);
655 }
656
657 #ifdef CONFIG_PM
658 static int amd_reinit_one(struct pci_dev *pdev)
659 {
660 if (pdev->vendor == PCI_VENDOR_ID_AMD) {
661 u8 fifo;
662 pci_read_config_byte(pdev, 0x41, &fifo);
663 if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
664 /* FIFO is broken */
665 pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
666 else
667 pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
668 if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
669 pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
670 ata_pci_clear_simplex(pdev);
671 }
672 return ata_pci_device_resume(pdev);
673 }
674 #endif
675
676 static const struct pci_device_id amd[] = {
677 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
678 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
679 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 3 },
680 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 4 },
681 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 5 },
682 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 7 },
683 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 8 },
684 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 8 },
685 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 8 },
686 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 8 },
687 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 8 },
688 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 8 },
689 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 8 },
690 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 8 },
691 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 },
692 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 },
693 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 },
694 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 8 },
695 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 8 },
696 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 },
697
698 { },
699 };
700
701 static struct pci_driver amd_pci_driver = {
702 .name = DRV_NAME,
703 .id_table = amd,
704 .probe = amd_init_one,
705 .remove = ata_pci_remove_one,
706 #ifdef CONFIG_PM
707 .suspend = ata_pci_device_suspend,
708 .resume = amd_reinit_one,
709 #endif
710 };
711
712 static int __init amd_init(void)
713 {
714 return pci_register_driver(&amd_pci_driver);
715 }
716
717 static void __exit amd_exit(void)
718 {
719 pci_unregister_driver(&amd_pci_driver);
720 }
721
722 MODULE_AUTHOR("Alan Cox");
723 MODULE_DESCRIPTION("low-level driver for AMD PATA IDE");
724 MODULE_LICENSE("GPL");
725 MODULE_DEVICE_TABLE(pci, amd);
726 MODULE_VERSION(DRV_VERSION);
727
728 module_init(amd_init);
729 module_exit(amd_exit);
Linux kernel - Deliverables
This page took 0.059289 seconds and 6 git commands to generate.