Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[deliverable/linux.git] / drivers / ide / ide-disk.c
1 /*
2 * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
3 * Copyright (C) 1998-2002 Linux ATA Development
4 * Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2003 Red Hat
6 * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
7 */
8
9 /*
10 * Mostly written by Mark Lord <mlord@pobox.com>
11 * and Gadi Oxman <gadio@netvision.net.il>
12 * and Andre Hedrick <andre@linux-ide.org>
13 *
14 * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
15 */
16
17 #include <linux/types.h>
18 #include <linux/string.h>
19 #include <linux/kernel.h>
20 #include <linux/timer.h>
21 #include <linux/mm.h>
22 #include <linux/interrupt.h>
23 #include <linux/major.h>
24 #include <linux/errno.h>
25 #include <linux/genhd.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
28 #include <linux/mutex.h>
29 #include <linux/leds.h>
30 #include <linux/ide.h>
31
32 #include <asm/byteorder.h>
33 #include <asm/irq.h>
34 #include <asm/uaccess.h>
35 #include <asm/io.h>
36 #include <asm/div64.h>
37
38 #include "ide-disk.h"
39
40 static const u8 ide_rw_cmds[] = {
41 ATA_CMD_READ_MULTI,
42 ATA_CMD_WRITE_MULTI,
43 ATA_CMD_READ_MULTI_EXT,
44 ATA_CMD_WRITE_MULTI_EXT,
45 ATA_CMD_PIO_READ,
46 ATA_CMD_PIO_WRITE,
47 ATA_CMD_PIO_READ_EXT,
48 ATA_CMD_PIO_WRITE_EXT,
49 ATA_CMD_READ,
50 ATA_CMD_WRITE,
51 ATA_CMD_READ_EXT,
52 ATA_CMD_WRITE_EXT,
53 };
54
55 static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
56 {
57 u8 index, lba48, write;
58
59 lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
60 write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
61
62 if (dma) {
63 cmd->protocol = ATA_PROT_DMA;
64 index = 8;
65 } else {
66 cmd->protocol = ATA_PROT_PIO;
67 if (drive->mult_count) {
68 cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
69 index = 0;
70 } else
71 index = 4;
72 }
73
74 cmd->tf.command = ide_rw_cmds[index + lba48 + write];
75 }
76
77 /*
78 * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
79 * using LBA if supported, or CHS otherwise, to address sectors.
80 */
81 static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
82 sector_t block)
83 {
84 ide_hwif_t *hwif = drive->hwif;
85 u16 nsectors = (u16)rq->nr_sectors;
86 u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
87 u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
88 struct ide_cmd cmd;
89 struct ide_taskfile *tf = &cmd.tf;
90 ide_startstop_t rc;
91
92 if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
93 if (block + rq->nr_sectors > 1ULL << 28)
94 dma = 0;
95 else
96 lba48 = 0;
97 }
98
99 memset(&cmd, 0, sizeof(cmd));
100 cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
101
102 if (drive->dev_flags & IDE_DFLAG_LBA) {
103 if (lba48) {
104 pr_debug("%s: LBA=0x%012llx\n", drive->name,
105 (unsigned long long)block);
106
107 tf->hob_nsect = (nsectors >> 8) & 0xff;
108 tf->hob_lbal = (u8)(block >> 24);
109 if (sizeof(block) != 4) {
110 tf->hob_lbam = (u8)((u64)block >> 32);
111 tf->hob_lbah = (u8)((u64)block >> 40);
112 }
113
114 tf->nsect = nsectors & 0xff;
115 tf->lbal = (u8) block;
116 tf->lbam = (u8)(block >> 8);
117 tf->lbah = (u8)(block >> 16);
118
119 cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
120 } else {
121 tf->nsect = nsectors & 0xff;
122 tf->lbal = block;
123 tf->lbam = block >>= 8;
124 tf->lbah = block >>= 8;
125 tf->device = (block >> 8) & 0xf;
126 }
127
128 tf->device |= ATA_LBA;
129 } else {
130 unsigned int sect, head, cyl, track;
131
132 track = (int)block / drive->sect;
133 sect = (int)block % drive->sect + 1;
134 head = track % drive->head;
135 cyl = track / drive->head;
136
137 pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
138
139 tf->nsect = nsectors & 0xff;
140 tf->lbal = sect;
141 tf->lbam = cyl;
142 tf->lbah = cyl >> 8;
143 tf->device = head;
144 }
145
146 cmd.tf_flags |= IDE_TFLAG_FS;
147
148 if (rq_data_dir(rq))
149 cmd.tf_flags |= IDE_TFLAG_WRITE;
150
151 ide_tf_set_cmd(drive, &cmd, dma);
152 cmd.rq = rq;
153
154 if (dma == 0) {
155 ide_init_sg_cmd(&cmd, nsectors << 9);
156 ide_map_sg(drive, &cmd);
157 }
158
159 rc = do_rw_taskfile(drive, &cmd);
160
161 if (rc == ide_stopped && dma) {
162 /* fallback to PIO */
163 cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
164 ide_tf_set_cmd(drive, &cmd, 0);
165 ide_init_sg_cmd(&cmd, nsectors << 9);
166 rc = do_rw_taskfile(drive, &cmd);
167 }
168
169 return rc;
170 }
171
172 /*
173 * 268435455 == 137439 MB or 28bit limit
174 * 320173056 == 163929 MB or 48bit addressing
175 * 1073741822 == 549756 MB or 48bit addressing fake drive
176 */
177
178 static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
179 sector_t block)
180 {
181 ide_hwif_t *hwif = drive->hwif;
182
183 BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
184
185 if (!blk_fs_request(rq)) {
186 blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
187 if (rq->errors == 0)
188 rq->errors = -EIO;
189 ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
190 return ide_stopped;
191 }
192
193 ledtrig_ide_activity();
194
195 pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
196 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
197 (unsigned long long)block, rq->nr_sectors,
198 (unsigned long)rq->buffer);
199
200 if (hwif->rw_disk)
201 hwif->rw_disk(drive, rq);
202
203 return __ide_do_rw_disk(drive, rq, block);
204 }
205
206 /*
207 * Queries for true maximum capacity of the drive.
208 * Returns maximum LBA address (> 0) of the drive, 0 if failed.
209 */
210 static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
211 {
212 struct ide_cmd cmd;
213 struct ide_taskfile *tf = &cmd.tf;
214 u64 addr = 0;
215
216 memset(&cmd, 0, sizeof(cmd));
217 if (lba48)
218 tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
219 else
220 tf->command = ATA_CMD_READ_NATIVE_MAX;
221 tf->device = ATA_LBA;
222
223 cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
224 if (lba48)
225 cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
226
227 ide_no_data_taskfile(drive, &cmd);
228
229 /* if OK, compute maximum address value */
230 if (!(tf->status & ATA_ERR))
231 addr = ide_get_lba_addr(tf, lba48) + 1;
232
233 return addr;
234 }
235
236 /*
237 * Sets maximum virtual LBA address of the drive.
238 * Returns new maximum virtual LBA address (> 0) or 0 on failure.
239 */
240 static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
241 {
242 struct ide_cmd cmd;
243 struct ide_taskfile *tf = &cmd.tf;
244 u64 addr_set = 0;
245
246 addr_req--;
247
248 memset(&cmd, 0, sizeof(cmd));
249 tf->lbal = (addr_req >> 0) & 0xff;
250 tf->lbam = (addr_req >>= 8) & 0xff;
251 tf->lbah = (addr_req >>= 8) & 0xff;
252 if (lba48) {
253 tf->hob_lbal = (addr_req >>= 8) & 0xff;
254 tf->hob_lbam = (addr_req >>= 8) & 0xff;
255 tf->hob_lbah = (addr_req >>= 8) & 0xff;
256 tf->command = ATA_CMD_SET_MAX_EXT;
257 } else {
258 tf->device = (addr_req >>= 8) & 0x0f;
259 tf->command = ATA_CMD_SET_MAX;
260 }
261 tf->device |= ATA_LBA;
262
263 cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
264 if (lba48)
265 cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
266
267 ide_no_data_taskfile(drive, &cmd);
268
269 /* if OK, compute maximum address value */
270 if (!(tf->status & ATA_ERR))
271 addr_set = ide_get_lba_addr(tf, lba48) + 1;
272
273 return addr_set;
274 }
275
276 static unsigned long long sectors_to_MB(unsigned long long n)
277 {
278 n <<= 9; /* make it bytes */
279 do_div(n, 1000000); /* make it MB */
280 return n;
281 }
282
283 /*
284 * Some disks report total number of sectors instead of
285 * maximum sector address. We list them here.
286 */
287 static const struct drive_list_entry hpa_list[] = {
288 { "ST340823A", NULL },
289 { "ST320413A", NULL },
290 { "ST310211A", NULL },
291 { NULL, NULL }
292 };
293
294 static void idedisk_check_hpa(ide_drive_t *drive)
295 {
296 unsigned long long capacity, set_max;
297 int lba48 = ata_id_lba48_enabled(drive->id);
298
299 capacity = drive->capacity64;
300
301 set_max = idedisk_read_native_max_address(drive, lba48);
302
303 if (ide_in_drive_list(drive->id, hpa_list)) {
304 /*
305 * Since we are inclusive wrt to firmware revisions do this
306 * extra check and apply the workaround only when needed.
307 */
308 if (set_max == capacity + 1)
309 set_max--;
310 }
311
312 if (set_max <= capacity)
313 return;
314
315 printk(KERN_INFO "%s: Host Protected Area detected.\n"
316 "\tcurrent capacity is %llu sectors (%llu MB)\n"
317 "\tnative capacity is %llu sectors (%llu MB)\n",
318 drive->name,
319 capacity, sectors_to_MB(capacity),
320 set_max, sectors_to_MB(set_max));
321
322 set_max = idedisk_set_max_address(drive, set_max, lba48);
323
324 if (set_max) {
325 drive->capacity64 = set_max;
326 printk(KERN_INFO "%s: Host Protected Area disabled.\n",
327 drive->name);
328 }
329 }
330
331 static int ide_disk_get_capacity(ide_drive_t *drive)
332 {
333 u16 *id = drive->id;
334 int lba;
335
336 if (ata_id_lba48_enabled(id)) {
337 /* drive speaks 48-bit LBA */
338 lba = 1;
339 drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
340 } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
341 /* drive speaks 28-bit LBA */
342 lba = 1;
343 drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
344 } else {
345 /* drive speaks boring old 28-bit CHS */
346 lba = 0;
347 drive->capacity64 = drive->cyl * drive->head * drive->sect;
348 }
349
350 if (lba) {
351 drive->dev_flags |= IDE_DFLAG_LBA;
352
353 /*
354 * If this device supports the Host Protected Area feature set,
355 * then we may need to change our opinion about its capacity.
356 */
357 if (ata_id_hpa_enabled(id))
358 idedisk_check_hpa(drive);
359 }
360
361 /* limit drive capacity to 137GB if LBA48 cannot be used */
362 if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
363 drive->capacity64 > 1ULL << 28) {
364 printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
365 "%llu sectors (%llu MB)\n",
366 drive->name, (unsigned long long)drive->capacity64,
367 sectors_to_MB(drive->capacity64));
368 drive->capacity64 = 1ULL << 28;
369 }
370
371 if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
372 (drive->dev_flags & IDE_DFLAG_LBA48)) {
373 if (drive->capacity64 > 1ULL << 28) {
374 printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
375 " will be used for accessing sectors "
376 "> %u\n", drive->name, 1 << 28);
377 } else
378 drive->dev_flags &= ~IDE_DFLAG_LBA48;
379 }
380
381 return 0;
382 }
383
384 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
385 {
386 ide_drive_t *drive = q->queuedata;
387 struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
388
389 /* FIXME: map struct ide_taskfile on rq->cmd[] */
390 BUG_ON(cmd == NULL);
391
392 memset(cmd, 0, sizeof(*cmd));
393 if (ata_id_flush_ext_enabled(drive->id) &&
394 (drive->capacity64 >= (1UL << 28)))
395 cmd->tf.command = ATA_CMD_FLUSH_EXT;
396 else
397 cmd->tf.command = ATA_CMD_FLUSH;
398 cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
399 IDE_TFLAG_DYN;
400 cmd->protocol = ATA_PROT_NODATA;
401
402 rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
403 rq->cmd_flags |= REQ_SOFTBARRIER;
404 rq->special = cmd;
405 }
406
407 ide_devset_get(multcount, mult_count);
408
409 /*
410 * This is tightly woven into the driver->do_special can not touch.
411 * DON'T do it again until a total personality rewrite is committed.
412 */
413 static int set_multcount(ide_drive_t *drive, int arg)
414 {
415 struct request *rq;
416 int error;
417
418 if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
419 return -EINVAL;
420
421 if (drive->special.b.set_multmode)
422 return -EBUSY;
423
424 rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
425 rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
426
427 drive->mult_req = arg;
428 drive->special.b.set_multmode = 1;
429 error = blk_execute_rq(drive->queue, NULL, rq, 0);
430 blk_put_request(rq);
431
432 return (drive->mult_count == arg) ? 0 : -EIO;
433 }
434
435 ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
436
437 static int set_nowerr(ide_drive_t *drive, int arg)
438 {
439 if (arg < 0 || arg > 1)
440 return -EINVAL;
441
442 if (arg)
443 drive->dev_flags |= IDE_DFLAG_NOWERR;
444 else
445 drive->dev_flags &= ~IDE_DFLAG_NOWERR;
446
447 drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
448
449 return 0;
450 }
451
452 static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
453 {
454 struct ide_cmd cmd;
455
456 memset(&cmd, 0, sizeof(cmd));
457 cmd.tf.feature = feature;
458 cmd.tf.nsect = nsect;
459 cmd.tf.command = ATA_CMD_SET_FEATURES;
460 cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
461
462 return ide_no_data_taskfile(drive, &cmd);
463 }
464
465 static void update_ordered(ide_drive_t *drive)
466 {
467 u16 *id = drive->id;
468 unsigned ordered = QUEUE_ORDERED_NONE;
469 prepare_flush_fn *prep_fn = NULL;
470
471 if (drive->dev_flags & IDE_DFLAG_WCACHE) {
472 unsigned long long capacity;
473 int barrier;
474 /*
475 * We must avoid issuing commands a drive does not
476 * understand or we may crash it. We check flush cache
477 * is supported. We also check we have the LBA48 flush
478 * cache if the drive capacity is too large. By this
479 * time we have trimmed the drive capacity if LBA48 is
480 * not available so we don't need to recheck that.
481 */
482 capacity = ide_gd_capacity(drive);
483 barrier = ata_id_flush_enabled(id) &&
484 (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
485 ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
486 capacity <= (1ULL << 28) ||
487 ata_id_flush_ext_enabled(id));
488
489 printk(KERN_INFO "%s: cache flushes %ssupported\n",
490 drive->name, barrier ? "" : "not ");
491
492 if (barrier) {
493 ordered = QUEUE_ORDERED_DRAIN_FLUSH;
494 prep_fn = idedisk_prepare_flush;
495 }
496 } else
497 ordered = QUEUE_ORDERED_DRAIN;
498
499 blk_queue_ordered(drive->queue, ordered, prep_fn);
500 }
501
502 ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
503
504 static int set_wcache(ide_drive_t *drive, int arg)
505 {
506 int err = 1;
507
508 if (arg < 0 || arg > 1)
509 return -EINVAL;
510
511 if (ata_id_flush_enabled(drive->id)) {
512 err = ide_do_setfeature(drive,
513 arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
514 if (err == 0) {
515 if (arg)
516 drive->dev_flags |= IDE_DFLAG_WCACHE;
517 else
518 drive->dev_flags &= ~IDE_DFLAG_WCACHE;
519 }
520 }
521
522 update_ordered(drive);
523
524 return err;
525 }
526
527 static int do_idedisk_flushcache(ide_drive_t *drive)
528 {
529 struct ide_cmd cmd;
530
531 memset(&cmd, 0, sizeof(cmd));
532 if (ata_id_flush_ext_enabled(drive->id))
533 cmd.tf.command = ATA_CMD_FLUSH_EXT;
534 else
535 cmd.tf.command = ATA_CMD_FLUSH;
536 cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
537
538 return ide_no_data_taskfile(drive, &cmd);
539 }
540
541 ide_devset_get(acoustic, acoustic);
542
543 static int set_acoustic(ide_drive_t *drive, int arg)
544 {
545 if (arg < 0 || arg > 254)
546 return -EINVAL;
547
548 ide_do_setfeature(drive,
549 arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
550
551 drive->acoustic = arg;
552
553 return 0;
554 }
555
556 ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
557
558 /*
559 * drive->addressing:
560 * 0: 28-bit
561 * 1: 48-bit
562 * 2: 48-bit capable doing 28-bit
563 */
564 static int set_addressing(ide_drive_t *drive, int arg)
565 {
566 if (arg < 0 || arg > 2)
567 return -EINVAL;
568
569 if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
570 ata_id_lba48_enabled(drive->id) == 0))
571 return -EIO;
572
573 if (arg == 2)
574 arg = 0;
575
576 if (arg)
577 drive->dev_flags |= IDE_DFLAG_LBA48;
578 else
579 drive->dev_flags &= ~IDE_DFLAG_LBA48;
580
581 return 0;
582 }
583
584 ide_ext_devset_rw(acoustic, acoustic);
585 ide_ext_devset_rw(address, addressing);
586 ide_ext_devset_rw(multcount, multcount);
587 ide_ext_devset_rw(wcache, wcache);
588
589 ide_ext_devset_rw_sync(nowerr, nowerr);
590
591 static int ide_disk_check(ide_drive_t *drive, const char *s)
592 {
593 return 1;
594 }
595
596 static void ide_disk_setup(ide_drive_t *drive)
597 {
598 struct ide_disk_obj *idkp = drive->driver_data;
599 struct request_queue *q = drive->queue;
600 ide_hwif_t *hwif = drive->hwif;
601 u16 *id = drive->id;
602 char *m = (char *)&id[ATA_ID_PROD];
603 unsigned long long capacity;
604
605 ide_proc_register_driver(drive, idkp->driver);
606
607 if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
608 return;
609
610 if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
611 /*
612 * Removable disks (eg. SYQUEST); ignore 'WD' drives
613 */
614 if (m[0] != 'W' || m[1] != 'D')
615 drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
616 }
617
618 (void)set_addressing(drive, 1);
619
620 if (drive->dev_flags & IDE_DFLAG_LBA48) {
621 int max_s = 2048;
622
623 if (max_s > hwif->rqsize)
624 max_s = hwif->rqsize;
625
626 blk_queue_max_sectors(q, max_s);
627 }
628
629 printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
630 q->max_sectors / 2);
631
632 if (ata_id_is_ssd(id))
633 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
634
635 /* calculate drive capacity, and select LBA if possible */
636 ide_disk_get_capacity(drive);
637
638 /*
639 * if possible, give fdisk access to more of the drive,
640 * by correcting bios_cyls:
641 */
642 capacity = ide_gd_capacity(drive);
643
644 if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
645 if (ata_id_lba48_enabled(drive->id)) {
646 /* compatibility */
647 drive->bios_sect = 63;
648 drive->bios_head = 255;
649 }
650
651 if (drive->bios_sect && drive->bios_head) {
652 unsigned int cap0 = capacity; /* truncate to 32 bits */
653 unsigned int cylsz, cyl;
654
655 if (cap0 != capacity)
656 drive->bios_cyl = 65535;
657 else {
658 cylsz = drive->bios_sect * drive->bios_head;
659 cyl = cap0 / cylsz;
660 if (cyl > 65535)
661 cyl = 65535;
662 if (cyl > drive->bios_cyl)
663 drive->bios_cyl = cyl;
664 }
665 }
666 }
667 printk(KERN_INFO "%s: %llu sectors (%llu MB)",
668 drive->name, capacity, sectors_to_MB(capacity));
669
670 /* Only print cache size when it was specified */
671 if (id[ATA_ID_BUF_SIZE])
672 printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
673
674 printk(KERN_CONT ", CHS=%d/%d/%d\n",
675 drive->bios_cyl, drive->bios_head, drive->bios_sect);
676
677 /* write cache enabled? */
678 if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
679 drive->dev_flags |= IDE_DFLAG_WCACHE;
680
681 set_wcache(drive, 1);
682
683 if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
684 (drive->head == 0 || drive->head > 16)) {
685 printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
686 drive->name, drive->head);
687 drive->dev_flags &= ~IDE_DFLAG_ATTACH;
688 } else
689 drive->dev_flags |= IDE_DFLAG_ATTACH;
690 }
691
692 static void ide_disk_flush(ide_drive_t *drive)
693 {
694 if (ata_id_flush_enabled(drive->id) == 0 ||
695 (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
696 return;
697
698 if (do_idedisk_flushcache(drive))
699 printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
700 }
701
702 static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
703 {
704 return 0;
705 }
706
707 static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
708 int on)
709 {
710 struct ide_cmd cmd;
711 int ret;
712
713 if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
714 return 0;
715
716 memset(&cmd, 0, sizeof(cmd));
717 cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
718 cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
719
720 ret = ide_no_data_taskfile(drive, &cmd);
721
722 if (ret)
723 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
724
725 return ret;
726 }
727
728 const struct ide_disk_ops ide_ata_disk_ops = {
729 .check = ide_disk_check,
730 .get_capacity = ide_disk_get_capacity,
731 .setup = ide_disk_setup,
732 .flush = ide_disk_flush,
733 .init_media = ide_disk_init_media,
734 .set_doorlock = ide_disk_set_doorlock,
735 .do_request = ide_do_rw_disk,
736 .ioctl = ide_disk_ioctl,
737 };
This page took 0.055986 seconds and 5 git commands to generate.