drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_PROPERTIES
  15         def_tristate INPUT
  16         depends on INPUT
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_ATMEL_MXT_T37
 119         bool "Support T37 Diagnostic Data"
 120         depends on TOUCHSCREEN_ATMEL_MXT && VIDEO_V4L2
 121         select VIDEOBUF2_VMALLOC
 122         help
 123           Say Y here if you want support to output data from the T37
 124           Diagnostic Data object using a V4L device.
 125
 126 config TOUCHSCREEN_AUO_PIXCIR
 127         tristate "AUO in-cell touchscreen using Pixcir ICs"
 128         depends on I2C
 129         depends on GPIOLIB || COMPILE_TEST
 130         help
 131           Say Y here if you have a AUO display with in-cell touchscreen
 132           using Pixcir ICs.
 133
 134           If unsure, say N.
 135
 136           To compile this driver as a module, choose M here: the
 137           module will be called auo-pixcir-ts.
 138
 139 config TOUCHSCREEN_BU21013
 140         tristate "BU21013 based touch panel controllers"
 141         depends on I2C
 142         help
 143           Say Y here if you have a bu21013 touchscreen connected to
 144           your system.
 145
 146           If unsure, say N.
 147
 148           To compile this driver as a module, choose M here: the
 149           module will be called bu21013_ts.
 150
 151 config TOUCHSCREEN_CHIPONE_ICN8318
 152         tristate "chipone icn8318 touchscreen controller"
 153         depends on GPIOLIB || COMPILE_TEST
 154         depends on I2C
 155         depends on OF
 156         help
 157           Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 158
 159           If unsure, say N.
 160
 161           To compile this driver as a module, choose M here: the
 162           module will be called chipone_icn8318.
 163
 164 config TOUCHSCREEN_CY8CTMG110
 165         tristate "cy8ctmg110 touchscreen"
 166         depends on I2C
 167         depends on GPIOLIB || COMPILE_TEST
 168         help
 169           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 170           an AAVA device.
 171
 172           If unsure, say N.
 173
 174           To compile this driver as a module, choose M here: the
 175           module will be called cy8ctmg110_ts.
 176
 177 config TOUCHSCREEN_CYTTSP_CORE
 178         tristate "Cypress TTSP touchscreen"
 179         help
 180           Say Y here if you have a touchscreen using controller from
 181           the Cypress TrueTouch(tm) Standard Product family connected
 182           to your system. You will also need to select appropriate
 183           bus connection below.
 184
 185           If unsure, say N.
 186
 187           To compile this driver as a module, choose M here: the
 188           module will be called cyttsp_core.
 189
 190 config TOUCHSCREEN_CYTTSP_I2C
 191         tristate "support I2C bus connection"
 192         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 193         help
 194           Say Y here if the touchscreen is connected via I2C bus.
 195
 196           To compile this driver as a module, choose M here: the
 197           module will be called cyttsp_i2c.
 198
 199 config TOUCHSCREEN_CYTTSP_SPI
 200         tristate "support SPI bus connection"
 201         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 202         help
 203           Say Y here if the touchscreen is connected via SPI bus.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called cyttsp_spi.
 207
 208 config TOUCHSCREEN_CYTTSP4_CORE
 209         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 210         help
 211           Core driver for Cypress TrueTouch(tm) Standard Product
 212           Generation4 touchscreen controllers.
 213
 214           Say Y here if you have a Cypress Gen4 touchscreen.
 215
 216           If unsure, say N.
 217
 218           To compile this driver as a module, choose M here.
 219
 220 config TOUCHSCREEN_CYTTSP4_I2C
 221         tristate "support I2C bus connection"
 222         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 223         help
 224           Say Y here if the touchscreen is connected via I2C bus.
 225
 226           To compile this driver as a module, choose M here: the
 227           module will be called cyttsp4_i2c.
 228
 229 config TOUCHSCREEN_CYTTSP4_SPI
 230         tristate "support SPI bus connection"
 231         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 232         help
 233           Say Y here if the touchscreen is connected via SPI bus.
 234
 235           To compile this driver as a module, choose M here: the
 236           module will be called cyttsp4_spi.
 237
 238 config TOUCHSCREEN_DA9034
 239         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 240         depends on PMIC_DA903X
 241         default y
 242         help
 243           Say Y here to enable the support for the touchscreen found
 244           on Dialog Semiconductor DA9034 PMIC.
 245
 246           If unsure, say N.
 247
 248           To compile this driver as a module, choose M here: the
 249           module will be called da9034-ts.
 250
 251 config TOUCHSCREEN_DA9052
 252         tristate "Dialog DA9052/DA9053 TSI"
 253         depends on PMIC_DA9052
 254         help
 255           Say Y here to support the touchscreen found on Dialog Semiconductor
 256           DA9052-BC and DA9053-AA/Bx PMICs.
 257
 258           If unsure, say N.
 259
 260           To compile this driver as a module, choose M here: the
 261           module will be called da9052_tsi.
 262
 263 config TOUCHSCREEN_DYNAPRO
 264         tristate "Dynapro serial touchscreen"
 265         select SERIO
 266         help
 267           Say Y here if you have a Dynapro serial touchscreen connected to
 268           your system.
 269
 270           If unsure, say N.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called dynapro.
 274
 275 config TOUCHSCREEN_HAMPSHIRE
 276         tristate "Hampshire serial touchscreen"
 277         select SERIO
 278         help
 279           Say Y here if you have a Hampshire serial touchscreen connected to
 280           your system.
 281
 282           If unsure, say N.
 283
 284           To compile this driver as a module, choose M here: the
 285           module will be called hampshire.
 286
 287 config TOUCHSCREEN_EETI
 288         tristate "EETI touchscreen panel support"
 289         depends on I2C
 290         help
 291           Say Y here to enable support for I2C connected EETI touch panels.
 292
 293           To compile this driver as a module, choose M here: the
 294           module will be called eeti_ts.
 295
 296 config TOUCHSCREEN_EGALAX
 297         tristate "EETI eGalax multi-touch panel support"
 298         depends on I2C && OF
 299         help
 300           Say Y here to enable support for I2C connected EETI
 301           eGalax multi-touch panels.
 302
 303           To compile this driver as a module, choose M here: the
 304           module will be called egalax_ts.
 305
 306 config TOUCHSCREEN_EGALAX_SERIAL
 307         tristate "EETI eGalax serial touchscreen"
 308         select SERIO
 309         help
 310           Say Y here to enable support for serial connected EETI
 311           eGalax touch panels.
 312
 313           To compile this driver as a module, choose M here: the
 314           module will be called egalax_ts_serial.
 315
 316 config TOUCHSCREEN_FT6236
 317         tristate "FT6236 I2C touchscreen"
 318         depends on I2C
 319         depends on GPIOLIB || COMPILE_TEST
 320         help
 321           Say Y here to enable support for the I2C connected FT6x06 and
 322           FT6x36 family of capacitive touchscreen drivers.
 323
 324           If unsure, say N.
 325
 326           To compile this driver as a module, choose M here: the
 327           module will be called ft6236.
 328
 329 config TOUCHSCREEN_FUJITSU
 330         tristate "Fujitsu serial touchscreen"
 331         select SERIO
 332         help
 333           Say Y here if you have the Fujitsu touchscreen (such as one
 334           installed in Lifebook P series laptop) connected to your
 335           system.
 336
 337           If unsure, say N.
 338
 339           To compile this driver as a module, choose M here: the
 340           module will be called fujitsu-ts.
 341
 342 config TOUCHSCREEN_GOODIX
 343         tristate "Goodix I2C touchscreen"
 344         depends on I2C
 345         depends on GPIOLIB || COMPILE_TEST
 346         help
 347           Say Y here if you have the Goodix touchscreen (such as one
 348           installed in Onda v975w tablets) connected to your
 349           system. It also supports 5-finger chip models, which can be
 350           found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 351
 352           If unsure, say N.
 353
 354           To compile this driver as a module, choose M here: the
 355           module will be called goodix.
 356
 357 config TOUCHSCREEN_ILI210X
 358         tristate "Ilitek ILI210X based touchscreen"
 359         depends on I2C
 360         help
 361           Say Y here if you have a ILI210X based touchscreen
 362           controller. This driver supports models ILI2102,
 363           ILI2102s, ILI2103, ILI2103s and ILI2105.
 364           Such kind of chipsets can be found in Amazon Kindle Fire
 365           touchscreens.
 366
 367           If unsure, say N.
 368
 369           To compile this driver as a module, choose M here: the
 370           module will be called ili210x.
 371
 372 config TOUCHSCREEN_IPROC
 373         tristate "IPROC touch panel driver support"
 374         depends on ARCH_BCM_IPROC || COMPILE_TEST
 375         help
 376           Say Y here if you want to add support for the IPROC touch
 377           controller to your system.
 378
 379           If unsure, say N.
 380
 381           To compile this driver as a module, choose M here: the
 382           module will be called bcm_iproc_tsc.
 383
 384 config TOUCHSCREEN_S3C2410
 385         tristate "Samsung S3C2410/generic touchscreen input driver"
 386         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 387         depends on S3C_ADC
 388         help
 389           Say Y here if you have the s3c2410 touchscreen.
 390
 391           If unsure, say N.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called s3c2410_ts.
 395
 396 config TOUCHSCREEN_GUNZE
 397         tristate "Gunze AHL-51S touchscreen"
 398         select SERIO
 399         help
 400           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 401           your system.
 402
 403           If unsure, say N.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called gunze.
 407
 408 config TOUCHSCREEN_ELAN
 409         tristate "Elan eKTH I2C touchscreen"
 410         depends on I2C
 411         help
 412           Say Y here if you have an Elan eKTH I2C touchscreen
 413           connected to your system.
 414
 415           If unsure, say N.
 416
 417           To compile this driver as a module, choose M here: the
 418           module will be called elants_i2c.
 419
 420 config TOUCHSCREEN_ELO
 421         tristate "Elo serial touchscreens"
 422         select SERIO
 423         help
 424           Say Y here if you have an Elo serial touchscreen connected to
 425           your system.
 426
 427           If unsure, say N.
 428
 429           To compile this driver as a module, choose M here: the
 430           module will be called elo.
 431
 432 config TOUCHSCREEN_WACOM_W8001
 433         tristate "Wacom W8001 penabled serial touchscreen"
 434         select SERIO
 435         help
 436           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 437           connected to your system.
 438
 439           If unsure, say N.
 440
 441           To compile this driver as a module, choose M here: the
 442           module will be called wacom_w8001.
 443
 444 config TOUCHSCREEN_WACOM_I2C
 445         tristate "Wacom Tablet support (I2C)"
 446         depends on I2C
 447         help
 448           Say Y here if you want to use the I2C version of the Wacom
 449           Pen Tablet.
 450
 451           If unsure, say N.
 452
 453           To compile this driver as a module, choose M here: the module
 454           will be called wacom_i2c.
 455
 456 config TOUCHSCREEN_LPC32XX
 457         tristate "LPC32XX touchscreen controller"
 458         depends on ARCH_LPC32XX
 459         help
 460           Say Y here if you have a LPC32XX device and want
 461           to support the built-in touchscreen.
 462
 463           To compile this driver as a module, choose M here: the
 464           module will be called lpc32xx_ts.
 465
 466 config TOUCHSCREEN_MAX11801
 467         tristate "MAX11801 based touchscreens"
 468         depends on I2C
 469         help
 470           Say Y here if you have a MAX11801 based touchscreen
 471           controller.
 472
 473           If unsure, say N.
 474
 475           To compile this driver as a module, choose M here: the
 476           module will be called max11801_ts.
 477
 478 config TOUCHSCREEN_MCS5000
 479         tristate "MELFAS MCS-5000 touchscreen"
 480         depends on I2C
 481         help
 482           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 483           chip in your system.
 484
 485           If unsure, say N.
 486
 487           To compile this driver as a module, choose M here: the
 488           module will be called mcs5000_ts.
 489
 490 config TOUCHSCREEN_MMS114
 491         tristate "MELFAS MMS114 touchscreen"
 492         depends on I2C
 493         help
 494           Say Y here if you have the MELFAS MMS114 touchscreen controller
 495           chip in your system.
 496
 497           If unsure, say N.
 498
 499           To compile this driver as a module, choose M here: the
 500           module will be called mms114.
 501
 502 config TOUCHSCREEN_MELFAS_MIP4
 503         tristate "MELFAS MIP4 Touchscreen"
 504         depends on I2C
 505         help
 506           Say Y here if you have a MELFAS MIP4 Touchscreen device.
 507
 508           If unsure, say N.
 509
 510           To compile this driver as a module, choose M here:
 511           the module will be called melfas_mip4.
 512
 513 config TOUCHSCREEN_MTOUCH
 514         tristate "MicroTouch serial touchscreens"
 515         select SERIO
 516         help
 517           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 518           your system.
 519
 520           If unsure, say N.
 521
 522           To compile this driver as a module, choose M here: the
 523           module will be called mtouch.
 524
 525 config TOUCHSCREEN_IMX6UL_TSC
 526         tristate "Freescale i.MX6UL touchscreen controller"
 527         depends on (OF && GPIOLIB) || COMPILE_TEST
 528         help
 529           Say Y here if you have a Freescale i.MX6UL, and want to
 530           use the internal touchscreen controller.
 531
 532           If unsure, say N.
 533
 534           To compile this driver as a module, choose M here: the
 535           module will be called imx6ul_tsc.
 536
 537 config TOUCHSCREEN_INEXIO
 538         tristate "iNexio serial touchscreens"
 539         select SERIO
 540         help
 541           Say Y here if you have an iNexio serial touchscreen connected to
 542           your system.
 543
 544           If unsure, say N.
 545
 546           To compile this driver as a module, choose M here: the
 547           module will be called inexio.
 548
 549 config TOUCHSCREEN_INTEL_MID
 550         tristate "Intel MID platform resistive touchscreen"
 551         depends on INTEL_SCU_IPC
 552         help
 553           Say Y here if you have a Intel MID based touchscreen in
 554           your system.
 555
 556           If unsure, say N.
 557
 558           To compile this driver as a module, choose M here: the
 559           module will be called intel_mid_touch.
 560
 561 config TOUCHSCREEN_MK712
 562         tristate "ICS MicroClock MK712 touchscreen"
 563         help
 564           Say Y here if you have the ICS MicroClock MK712 touchscreen
 565           controller chip in your system.
 566
 567           If unsure, say N.
 568
 569           To compile this driver as a module, choose M here: the
 570           module will be called mk712.
 571
 572 config TOUCHSCREEN_HP600
 573         tristate "HP Jornada 6xx touchscreen"
 574         depends on SH_HP6XX && SH_ADC
 575         help
 576           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 577           support the built-in touchscreen.
 578
 579           To compile this driver as a module, choose M here: the
 580           module will be called hp680_ts_input.
 581
 582 config TOUCHSCREEN_HP7XX
 583         tristate "HP Jornada 7xx touchscreen"
 584         depends on SA1100_JORNADA720_SSP
 585         help
 586           Say Y here if you have a HP Jornada 710/720/728 and want
 587           to support the built-in touchscreen.
 588
 589           To compile this driver as a module, choose M here: the
 590           module will be called jornada720_ts.
 591
 592 config TOUCHSCREEN_IPAQ_MICRO
 593         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 594         depends on MFD_IPAQ_MICRO
 595         help
 596           Say Y here to enable support for the touchscreen attached to
 597           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 598
 599           If unsure, say N.
 600
 601           To compile this driver as a module, choose M here: the
 602           module will be called ipaq-micro-ts.
 603
 604 config TOUCHSCREEN_HTCPEN
 605         tristate "HTC Shift X9500 touchscreen"
 606         depends on ISA
 607         help
 608           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 609           Clio / Shangrila and want to support the built-in touchscreen.
 610
 611           If unsure, say N.
 612
 613           To compile this driver as a module, choose M here: the
 614           module will be called htcpen.
 615
 616 config TOUCHSCREEN_PENMOUNT
 617         tristate "Penmount serial touchscreen"
 618         select SERIO
 619         help
 620           Say Y here if you have a Penmount serial touchscreen connected to
 621           your system.
 622
 623           If unsure, say N.
 624
 625           To compile this driver as a module, choose M here: the
 626           module will be called penmount.
 627
 628 config TOUCHSCREEN_EDT_FT5X06
 629         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 630         depends on I2C
 631         help
 632           Say Y here if you have an EDT "Polytouch" touchscreen based
 633           on the FocalTech FT5x06 family of controllers connected to
 634           your system.
 635
 636           If unsure, say N.
 637
 638           To compile this driver as a module, choose M here: the
 639           module will be called edt-ft5x06.
 640
 641 config TOUCHSCREEN_MIGOR
 642         tristate "Renesas MIGO-R touchscreen"
 643         depends on (SH_MIGOR || COMPILE_TEST) && I2C
 644         help
 645           Say Y here to enable MIGO-R touchscreen support.
 646
 647           If unsure, say N.
 648
 649           To compile this driver as a module, choose M here: the
 650           module will be called migor_ts.
 651
 652 config TOUCHSCREEN_TOUCHRIGHT
 653         tristate "Touchright serial touchscreen"
 654         select SERIO
 655         help
 656           Say Y here if you have a Touchright serial touchscreen connected to
 657           your system.
 658
 659           If unsure, say N.
 660
 661           To compile this driver as a module, choose M here: the
 662           module will be called touchright.
 663
 664 config TOUCHSCREEN_TOUCHWIN
 665         tristate "Touchwin serial touchscreen"
 666         select SERIO
 667         help
 668           Say Y here if you have a Touchwin serial touchscreen connected to
 669           your system.
 670
 671           If unsure, say N.
 672
 673           To compile this driver as a module, choose M here: the
 674           module will be called touchwin.
 675
 676 config TOUCHSCREEN_TI_AM335X_TSC
 677         tristate "TI Touchscreen Interface"
 678         depends on MFD_TI_AM335X_TSCADC
 679         help
 680           Say Y here if you have 4/5/8 wire touchscreen controller
 681           to be connected to the ADC controller on your TI AM335x SoC.
 682
 683           If unsure, say N.
 684
 685           To compile this driver as a module, choose M here: the
 686           module will be called ti_am335x_tsc.
 687
 688 config TOUCHSCREEN_UCB1400
 689         tristate "Philips UCB1400 touchscreen"
 690         depends on AC97_BUS
 691         depends on UCB1400_CORE
 692         help
 693           This enables support for the Philips UCB1400 touchscreen interface.
 694           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 695           will be initialized only after the ALSA subsystem has been
 696           brought up and the UCB1400 detected.  You therefore have to
 697           configure ALSA support as well (either built-in or modular,
 698           independently of whether this driver is itself built-in or
 699           modular) for this driver to work.
 700
 701           To compile this driver as a module, choose M here: the
 702           module will be called ucb1400_ts.
 703
 704 config TOUCHSCREEN_PIXCIR
 705         tristate "PIXCIR I2C touchscreens"
 706         depends on I2C
 707         help
 708           Say Y here if you have a pixcir i2c touchscreen
 709           controller.
 710
 711           If unsure, say N.
 712
 713           To compile this driver as a module, choose M here: the
 714           module will be called pixcir_i2c_ts.
 715
 716 config TOUCHSCREEN_WDT87XX_I2C
 717         tristate "Weida HiTech I2C touchscreen"
 718         depends on I2C
 719         help
 720           Say Y here if you have a Weida WDT87XX I2C touchscreen
 721           connected to your system.
 722
 723           If unsure, say N.
 724
 725           To compile this driver as a module, choose M here: the
 726           module will be called wdt87xx_i2c.
 727
 728 config TOUCHSCREEN_WM831X
 729         tristate "Support for WM831x touchscreen controllers"
 730         depends on MFD_WM831X
 731         help
 732           This enables support for the touchscreen controller on the WM831x
 733           series of PMICs.
 734
 735           To compile this driver as a module, choose M here: the
 736           module will be called wm831x-ts.
 737
 738 config TOUCHSCREEN_WM97XX
 739         tristate "Support for WM97xx AC97 touchscreen controllers"
 740         depends on AC97_BUS
 741         help
 742           Say Y here if you have a Wolfson Microelectronics WM97xx
 743           touchscreen connected to your system. Note that this option
 744           only enables core driver, you will also need to select
 745           support for appropriate chip below.
 746
 747           If unsure, say N.
 748
 749           To compile this driver as a module, choose M here: the
 750           module will be called wm97xx-ts.
 751
 752 config TOUCHSCREEN_WM9705
 753         bool "WM9705 Touchscreen interface support"
 754         depends on TOUCHSCREEN_WM97XX
 755         default y
 756         help
 757           Say Y here to enable support for the Wolfson Microelectronics
 758           WM9705 touchscreen controller.
 759
 760 config TOUCHSCREEN_WM9712
 761         bool "WM9712 Touchscreen interface support"
 762         depends on TOUCHSCREEN_WM97XX
 763         default y
 764         help
 765           Say Y here to enable support for the Wolfson Microelectronics
 766           WM9712 touchscreen controller.
 767
 768 config TOUCHSCREEN_WM9713
 769         bool "WM9713 Touchscreen interface support"
 770         depends on TOUCHSCREEN_WM97XX
 771         default y
 772         help
 773           Say Y here to enable support for the Wolfson Microelectronics
 774           WM9713 touchscreen controller.
 775
 776 config TOUCHSCREEN_WM97XX_ATMEL
 777         tristate "WM97xx Atmel accelerated touch"
 778         depends on TOUCHSCREEN_WM97XX && AVR32
 779         help
 780           Say Y here for support for streaming mode with WM97xx touchscreens
 781           on Atmel AT91 or AVR32 systems with an AC97C module.
 782
 783           Be aware that this will use channel B in the controller for
 784           streaming data, this must not conflict with other AC97C drivers.
 785
 786           If unsure, say N.
 787
 788           To compile this driver as a module, choose M here: the module will
 789           be called atmel-wm97xx.
 790
 791 config TOUCHSCREEN_WM97XX_MAINSTONE
 792         tristate "WM97xx Mainstone/Palm accelerated touch"
 793         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 794         help
 795           Say Y here for support for streaming mode with WM97xx touchscreens
 796           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 797
 798           If unsure, say N.
 799
 800           To compile this driver as a module, choose M here: the
 801           module will be called mainstone-wm97xx.
 802
 803 config TOUCHSCREEN_WM97XX_ZYLONITE
 804         tristate "Zylonite accelerated touch"
 805         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 806         select TOUCHSCREEN_WM9713
 807         help
 808           Say Y here for support for streaming mode with the touchscreen
 809           on Zylonite systems.
 810
 811           If unsure, say N.
 812
 813           To compile this driver as a module, choose M here: the
 814           module will be called zylonite-wm97xx.
 815
 816 config TOUCHSCREEN_USB_COMPOSITE
 817         tristate "USB Touchscreen Driver"
 818         depends on USB_ARCH_HAS_HCD
 819         select USB
 820         help
 821           USB Touchscreen driver for:
 822           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 823           - PanJit TouchSet USB
 824           - 3M MicroTouch USB (EX II series)
 825           - ITM
 826           - some other eTurboTouch
 827           - Gunze AHL61
 828           - DMC TSC-10/25
 829           - IRTOUCHSYSTEMS/UNITOP
 830           - IdealTEK URTC1000
 831           - GoTop Super_Q2/GogoPen/PenPower tablets
 832           - JASTEC USB Touch Controller/DigiTech DTR-02U
 833           - Zytronic controllers
 834           - Elo TouchSystems 2700 IntelliTouch
 835           - EasyTouch USB Touch Controller from Data Modul
 836           - e2i (Mimo monitors)
 837
 838           Have a look at <http://linux.chapter7.ch/touchkit/> for
 839           a usage description and the required user-space stuff.
 840
 841           To compile this driver as a module, choose M here: the
 842           module will be called usbtouchscreen.
 843
 844 config TOUCHSCREEN_MX25
 845         tristate "Freescale i.MX25 touchscreen input driver"
 846         depends on MFD_MX25_TSADC
 847         help
 848           Enable support for touchscreen connected to your i.MX25.
 849
 850           To compile this driver as a module, choose M here: the
 851           module will be called fsl-imx25-tcq.
 852
 853 config TOUCHSCREEN_MC13783
 854         tristate "Freescale MC13783 touchscreen input driver"
 855         depends on MFD_MC13XXX
 856         help
 857           Say Y here if you have an Freescale MC13783 PMIC on your
 858           board and want to use its touchscreen
 859
 860           If unsure, say N.
 861
 862           To compile this driver as a module, choose M here: the
 863           module will be called mc13783_ts.
 864
 865 config TOUCHSCREEN_USB_EGALAX
 866         default y
 867         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 868         depends on TOUCHSCREEN_USB_COMPOSITE
 869
 870 config TOUCHSCREEN_USB_PANJIT
 871         default y
 872         bool "PanJit device support" if EXPERT
 873         depends on TOUCHSCREEN_USB_COMPOSITE
 874
 875 config TOUCHSCREEN_USB_3M
 876         default y
 877         bool "3M/Microtouch EX II series device support" if EXPERT
 878         depends on TOUCHSCREEN_USB_COMPOSITE
 879
 880 config TOUCHSCREEN_USB_ITM
 881         default y
 882         bool "ITM device support" if EXPERT
 883         depends on TOUCHSCREEN_USB_COMPOSITE
 884
 885 config TOUCHSCREEN_USB_ETURBO
 886         default y
 887         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 888         depends on TOUCHSCREEN_USB_COMPOSITE
 889
 890 config TOUCHSCREEN_USB_GUNZE
 891         default y
 892         bool "Gunze AHL61 device support" if EXPERT
 893         depends on TOUCHSCREEN_USB_COMPOSITE
 894
 895 config TOUCHSCREEN_USB_DMC_TSC10
 896         default y
 897         bool "DMC TSC-10/25 device support" if EXPERT
 898         depends on TOUCHSCREEN_USB_COMPOSITE
 899
 900 config TOUCHSCREEN_USB_IRTOUCH
 901         default y
 902         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 903         depends on TOUCHSCREEN_USB_COMPOSITE
 904
 905 config TOUCHSCREEN_USB_IDEALTEK
 906         default y
 907         bool "IdealTEK URTC1000 device support" if EXPERT
 908         depends on TOUCHSCREEN_USB_COMPOSITE
 909
 910 config TOUCHSCREEN_USB_GENERAL_TOUCH
 911         default y
 912         bool "GeneralTouch Touchscreen device support" if EXPERT
 913         depends on TOUCHSCREEN_USB_COMPOSITE
 914
 915 config TOUCHSCREEN_USB_GOTOP
 916         default y
 917         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 918         depends on TOUCHSCREEN_USB_COMPOSITE
 919
 920 config TOUCHSCREEN_USB_JASTEC
 921         default y
 922         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 923         depends on TOUCHSCREEN_USB_COMPOSITE
 924
 925 config TOUCHSCREEN_USB_ELO
 926         default y
 927         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 928         depends on TOUCHSCREEN_USB_COMPOSITE
 929
 930 config TOUCHSCREEN_USB_E2I
 931         default y
 932         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 933         depends on TOUCHSCREEN_USB_COMPOSITE
 934
 935 config TOUCHSCREEN_USB_ZYTRONIC
 936         default y
 937         bool "Zytronic controller" if EXPERT
 938         depends on TOUCHSCREEN_USB_COMPOSITE
 939
 940 config TOUCHSCREEN_USB_ETT_TC45USB
 941         default y
 942         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 943         depends on TOUCHSCREEN_USB_COMPOSITE
 944
 945 config TOUCHSCREEN_USB_NEXIO
 946         default y
 947         bool "NEXIO/iNexio device support" if EXPERT
 948         depends on TOUCHSCREEN_USB_COMPOSITE
 949
 950 config TOUCHSCREEN_USB_EASYTOUCH
 951         default y
 952         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 953         depends on TOUCHSCREEN_USB_COMPOSITE
 954         help
 955           Say Y here if you have an EasyTouch USB Touch controller.
 956           If unsure, say N.
 957
 958 config TOUCHSCREEN_TOUCHIT213
 959         tristate "Sahara TouchIT-213 touchscreen"
 960         select SERIO
 961         help
 962           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 963
 964           If unsure, say N.
 965
 966           To compile this driver as a module, choose M here: the
 967           module will be called touchit213.
 968
 969 config TOUCHSCREEN_TS4800
 970         tristate "TS-4800 touchscreen"
 971         depends on HAS_IOMEM && OF
 972         depends on SOC_IMX51 || COMPILE_TEST
 973         select MFD_SYSCON
 974         select INPUT_POLLDEV
 975         help
 976           Say Y here if you have a touchscreen on a TS-4800 board.
 977
 978           On TS-4800, the touchscreen is not handled directly by Linux but by
 979           a companion FPGA.
 980
 981           If unsure, say N.
 982
 983           To compile this driver as a module, choose M here: the
 984           module will be called ts4800_ts.
 985
 986 config TOUCHSCREEN_TSC_SERIO
 987         tristate "TSC-10/25/40 serial touchscreen support"
 988         select SERIO
 989         help
 990           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 991           to your system.
 992
 993           If unsure, say N.
 994
 995           To compile this driver as a module, choose M here: the
 996           module will be called tsc40.
 997
 998 config TOUCHSCREEN_TSC200X_CORE
 999         tristate
1000
1001 config TOUCHSCREEN_TSC2004
1002         tristate "TSC2004 based touchscreens"
1003         depends on I2C
1004         select REGMAP_I2C
1005         select TOUCHSCREEN_TSC200X_CORE
1006         help
1007           Say Y here if you have a TSC2004 based touchscreen.
1008
1009           If unsure, say N.
1010
1011           To compile this driver as a module, choose M here: the
1012           module will be called tsc2004.
1013
1014 config TOUCHSCREEN_TSC2005
1015         tristate "TSC2005 based touchscreens"
1016         depends on SPI_MASTER
1017         select REGMAP_SPI
1018         select TOUCHSCREEN_TSC200X_CORE
1019         help
1020           Say Y here if you have a TSC2005 based touchscreen.
1021
1022           If unsure, say N.
1023
1024           To compile this driver as a module, choose M here: the
1025           module will be called tsc2005.
1026
1027 config TOUCHSCREEN_TSC2007
1028         tristate "TSC2007 based touchscreens"
1029         depends on I2C
1030         help
1031           Say Y here if you have a TSC2007 based touchscreen.
1032
1033           If unsure, say N.
1034
1035           To compile this driver as a module, choose M here: the
1036           module will be called tsc2007.
1037
1038 config TOUCHSCREEN_W90X900
1039         tristate "W90P910 touchscreen driver"
1040         depends on ARCH_W90X900
1041         help
1042           Say Y here if you have a W90P910 based touchscreen.
1043
1044           To compile this driver as a module, choose M here: the
1045           module will be called w90p910_ts.
1046
1047 config TOUCHSCREEN_PCAP
1048         tristate "Motorola PCAP touchscreen"
1049         depends on EZX_PCAP
1050         help
1051           Say Y here if you have a Motorola EZX telephone and
1052           want to enable support for the built-in touchscreen.
1053
1054           To compile this driver as a module, choose M here: the
1055           module will be called pcap_ts.
1056
1057 config TOUCHSCREEN_RM_TS
1058         tristate "Raydium I2C Touchscreen"
1059         depends on I2C
1060         depends on GPIOLIB || COMPILE_TEST
1061         help
1062           Say Y here if you have Raydium series I2C touchscreen,
1063           such as RM32380, connected to your system.
1064
1065           If unsure, say N.
1066
1067           To compile this driver as a module, choose M here: the
1068           module will be called raydium_i2c_ts.
1069
1070 config TOUCHSCREEN_SILEAD
1071         tristate "Silead I2C touchscreen"
1072         depends on I2C
1073         help
1074           Say Y here if you have the Silead touchscreen connected to
1075           your system.
1076
1077           If unsure, say N.
1078
1079           To compile this driver as a module, choose M here: the
1080           module will be called silead.
1081
1082 config TOUCHSCREEN_SIS_I2C
1083         tristate "SiS 9200 family I2C touchscreen"
1084         depends on I2C
1085         select CRC_ITU_T
1086         depends on GPIOLIB || COMPILE_TEST
1087         help
1088           This enables support for SiS 9200 family over I2C based touchscreens.
1089
1090           If unsure, say N.
1091
1092           To compile this driver as a module, choose M here: the
1093           module will be called sis_i2c.
1094
1095 config TOUCHSCREEN_ST1232
1096         tristate "Sitronix ST1232 touchscreen controllers"
1097         depends on I2C
1098         help
1099           Say Y here if you want to support Sitronix ST1232
1100           touchscreen controller.
1101
1102           If unsure, say N.
1103
1104           To compile this driver as a module, choose M here: the
1105           module will be called st1232_ts.
1106
1107 config TOUCHSCREEN_STMPE
1108         tristate "STMicroelectronics STMPE touchscreens"
1109         depends on MFD_STMPE
1110         depends on (OF || COMPILE_TEST)
1111         help
1112           Say Y here if you want support for STMicroelectronics
1113           STMPE touchscreen controllers.
1114
1115           To compile this driver as a module, choose M here: the
1116           module will be called stmpe-ts.
1117
1118 config TOUCHSCREEN_SUN4I
1119         tristate "Allwinner sun4i resistive touchscreen controller support"
1120         depends on ARCH_SUNXI || COMPILE_TEST
1121         depends on HWMON
1122         depends on THERMAL || !THERMAL_OF
1123         help
1124           This selects support for the resistive touchscreen controller
1125           found on Allwinner sunxi SoCs.
1126
1127           To compile this driver as a module, choose M here: the
1128           module will be called sun4i-ts.
1129
1130 config TOUCHSCREEN_SUR40
1131         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1132         depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1133         depends on VIDEO_V4L2
1134         select INPUT_POLLDEV
1135         select VIDEOBUF2_DMA_SG
1136         help
1137           Say Y here if you want support for the Samsung SUR40 touchscreen
1138           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1139
1140           To compile this driver as a module, choose M here: the
1141           module will be called sur40.
1142
1143 config TOUCHSCREEN_SURFACE3_SPI
1144         tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1145         depends on SPI
1146         depends on GPIOLIB || COMPILE_TEST
1147         help
1148           Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1149           controller chip as found on the Surface 3 in your system.
1150
1151           If unsure, say N.
1152
1153           To compile this driver as a module, choose M here: the
1154           module will be called surface3_spi.
1155
1156 config TOUCHSCREEN_SX8654
1157         tristate "Semtech SX8654 touchscreen"
1158         depends on I2C
1159         help
1160           Say Y here if you have a Semtech SX8654 touchscreen controller.
1161
1162           If unsure, say N
1163
1164           To compile this driver as a module, choose M here: the
1165           module will be called sx8654.
1166
1167 config TOUCHSCREEN_TPS6507X
1168         tristate "TPS6507x based touchscreens"
1169         depends on I2C
1170         select INPUT_POLLDEV
1171         help
1172           Say Y here if you have a TPS6507x based touchscreen
1173           controller.
1174
1175           If unsure, say N.
1176
1177           To compile this driver as a module, choose M here: the
1178           module will be called tps6507x_ts.
1179
1180 config TOUCHSCREEN_ZFORCE
1181         tristate "Neonode zForce infrared touchscreens"
1182         depends on I2C
1183         depends on GPIOLIB || COMPILE_TEST
1184         help
1185           Say Y here if you have a touchscreen using the zforce
1186           infraread technology from Neonode.
1187
1188           If unsure, say N.
1189
1190           To compile this driver as a module, choose M here: the
1191           module will be called zforce_ts.
1192
1193 config TOUCHSCREEN_COLIBRI_VF50
1194         tristate "Toradex Colibri on board touchscreen driver"
1195         depends on IIO && VF610_ADC
1196         depends on GPIOLIB || COMPILE_TEST
1197         help
1198           Say Y here if you have a Colibri VF50 and plan to use
1199           the on-board provided 4-wire touchscreen driver.
1200
1201           If unsure, say N.
1202
1203           To compile this driver as a module, choose M here: the
1204           module will be called colibri_vf50_ts.
1205
1206 config TOUCHSCREEN_ROHM_BU21023
1207         tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1208         depends on I2C
1209         help
1210           Say Y here if you have a touchscreen using ROHM BU21023/24.
1211
1212           If unsure, say N.
1213
1214           To compile this driver as a module, choose M here: the
1215           module will be called bu21023_ts.
1216
1217 endif