projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
[deliverable/linux.git] / drivers / input / touchscreen / auo-pixcir-ts.c
1 /*
2 * Driver for AUO in-cell touchscreens
3 *
4 * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
5 *
6 * loosely based on auo_touch.c from Dell Streak vendor-kernel
7 *
8 * Copyright (c) 2008 QUALCOMM Incorporated.
9 * Copyright (c) 2008 QUALCOMM USA, INC.
10 *
11 *
12 * This software is licensed under the terms of the GNU General Public
13 * License version 2, as published by the Free Software Foundation, and
14 * may be copied, distributed, and modified under those terms.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 */
22
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/interrupt.h>
26 #include <linux/slab.h>
27 #include <linux/input.h>
28 #include <linux/jiffies.h>
29 #include <linux/i2c.h>
30 #include <linux/mutex.h>
31 #include <linux/delay.h>
32 #include <linux/gpio.h>
33 #include <linux/input/auo-pixcir-ts.h>
34
35 /*
36 * Coordinate calculation:
37 * X1 = X1_LSB + X1_MSB*256
38 * Y1 = Y1_LSB + Y1_MSB*256
39 * X2 = X2_LSB + X2_MSB*256
40 * Y2 = Y2_LSB + Y2_MSB*256
41 */
42 #define AUO_PIXCIR_REG_X1_LSB 0x00
43 #define AUO_PIXCIR_REG_X1_MSB 0x01
44 #define AUO_PIXCIR_REG_Y1_LSB 0x02
45 #define AUO_PIXCIR_REG_Y1_MSB 0x03
46 #define AUO_PIXCIR_REG_X2_LSB 0x04
47 #define AUO_PIXCIR_REG_X2_MSB 0x05
48 #define AUO_PIXCIR_REG_Y2_LSB 0x06
49 #define AUO_PIXCIR_REG_Y2_MSB 0x07
50
51 #define AUO_PIXCIR_REG_STRENGTH 0x0d
52 #define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e
53 #define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f
54
55 #define AUO_PIXCIR_REG_RAW_DATA_X 0x2b
56 #define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f
57
58 #define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f
59 #define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70
60 #define AUO_PIXCIR_REG_INT_SETTING 0x71
61 #define AUO_PIXCIR_REG_INT_WIDTH 0x72
62 #define AUO_PIXCIR_REG_POWER_MODE 0x73
63
64 #define AUO_PIXCIR_REG_VERSION 0x77
65 #define AUO_PIXCIR_REG_CALIBRATE 0x78
66
67 #define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e
68 #define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f
69 #define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20
70 #define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21
71
72 #define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42
73 #define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad
74
75 #define AUO_PIXCIR_INT_TPNUM_MASK 0xe0
76 #define AUO_PIXCIR_INT_TPNUM_SHIFT 5
77 #define AUO_PIXCIR_INT_RELEASE (1 << 4)
78 #define AUO_PIXCIR_INT_ENABLE (1 << 3)
79 #define AUO_PIXCIR_INT_POL_HIGH (1 << 2)
80 #define AUO_PIXCIR_INT_MODE_MASK 0x03
81
82 /*
83 * Power modes:
84 * active: scan speed 60Hz
85 * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch
86 * deep sleep: scan speed 1Hz can only be entered or left manually.
87 */
88 #define AUO_PIXCIR_POWER_ACTIVE 0x00
89 #define AUO_PIXCIR_POWER_SLEEP 0x01
90 #define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02
91 #define AUO_PIXCIR_POWER_MASK 0x03
92
93 #define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2)
94 #define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4)
95
96 #define AUO_PIXCIR_CALIBRATE 0x03
97
98 #define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62
99 #define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36
100
101 #define AUO_PIXCIR_RAW_DATA_X_LEN 18
102 #define AUO_PIXCIR_RAW_DATA_Y_LEN 11
103
104 #define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0)
105
106 /* Touchscreen absolute values */
107 #define AUO_PIXCIR_REPORT_POINTS 2
108 #define AUO_PIXCIR_MAX_AREA 0xff
109 #define AUO_PIXCIR_PENUP_TIMEOUT_MS 10
110
111 struct auo_pixcir_ts {
112 struct i2c_client *client;
113 struct input_dev *input;
114 char phys[32];
115
116 /* special handling for touch_indicate interupt mode */
117 bool touch_ind_mode;
118
119 wait_queue_head_t wait;
120 bool stopped;
121 };
122
123 struct auo_point_t {
124 int coord_x;
125 int coord_y;
126 int area_major;
127 int area_minor;
128 int orientation;
129 };
130
131 static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts,
132 struct auo_point_t *point)
133 {
134 struct i2c_client *client = ts->client;
135 const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
136 uint8_t raw_coord[8];
137 uint8_t raw_area[4];
138 int i, ret;
139
140 /* touch coordinates */
141 ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB,
142 8, raw_coord);
143 if (ret < 0) {
144 dev_err(&client->dev, "failed to read coordinate, %d\n", ret);
145 return ret;
146 }
147
148 /* touch area */
149 ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1,
150 4, raw_area);
151 if (ret < 0) {
152 dev_err(&client->dev, "could not read touch area, %d\n", ret);
153 return ret;
154 }
155
156 for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
157 point[i].coord_x =
158 raw_coord[4 * i + 1] << 8 | raw_coord[4 * i];
159 point[i].coord_y =
160 raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2];
161
162 if (point[i].coord_x > pdata->x_max ||
163 point[i].coord_y > pdata->y_max) {
164 dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
165 point[i].coord_x, point[i].coord_y);
166 point[i].coord_x = point[i].coord_y = 0;
167 }
168
169 /* determine touch major, minor and orientation */
170 point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]);
171 point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]);
172 point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1];
173 }
174
175 return 0;
176 }
177
178 static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id)
179 {
180 struct auo_pixcir_ts *ts = dev_id;
181 struct i2c_client *client = ts->client;
182 const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
183 struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS];
184 int i;
185 int ret;
186 int fingers = 0;
187 int abs = -1;
188
189 while (!ts->stopped) {
190
191 /* check for up event in touch touch_ind_mode */
192 if (ts->touch_ind_mode) {
193 if (gpio_get_value(pdata->gpio_int) == 0) {
194 input_mt_sync(ts->input);
195 input_report_key(ts->input, BTN_TOUCH, 0);
196 input_sync(ts->input);
197 break;
198 }
199 }
200
201 ret = auo_pixcir_collect_data(ts, point);
202 if (ret < 0) {
203 /* we want to loop only in touch_ind_mode */
204 if (!ts->touch_ind_mode)
205 break;
206
207 wait_event_timeout(ts->wait, ts->stopped,
208 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
209 continue;
210 }
211
212 for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
213 if (point[i].coord_x > 0 || point[i].coord_y > 0) {
214 input_report_abs(ts->input, ABS_MT_POSITION_X,
215 point[i].coord_x);
216 input_report_abs(ts->input, ABS_MT_POSITION_Y,
217 point[i].coord_y);
218 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
219 point[i].area_major);
220 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
221 point[i].area_minor);
222 input_report_abs(ts->input, ABS_MT_ORIENTATION,
223 point[i].orientation);
224 input_mt_sync(ts->input);
225
226 /* use first finger as source for singletouch */
227 if (fingers == 0)
228 abs = i;
229
230 /* number of touch points could also be queried
231 * via i2c but would require an additional call
232 */
233 fingers++;
234 }
235 }
236
237 input_report_key(ts->input, BTN_TOUCH, fingers > 0);
238
239 if (abs > -1) {
240 input_report_abs(ts->input, ABS_X, point[abs].coord_x);
241 input_report_abs(ts->input, ABS_Y, point[abs].coord_y);
242 }
243
244 input_sync(ts->input);
245
246 /* we want to loop only in touch_ind_mode */
247 if (!ts->touch_ind_mode)
248 break;
249
250 wait_event_timeout(ts->wait, ts->stopped,
251 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
252 }
253
254 return IRQ_HANDLED;
255 }
256
257 /*
258 * Set the power mode of the device.
259 * Valid modes are
260 * - AUO_PIXCIR_POWER_ACTIVE
261 * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch
262 * - AUO_PIXCIR_POWER_DEEP_SLEEP
263 */
264 static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode)
265 {
266 struct i2c_client *client = ts->client;
267 int ret;
268
269 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE);
270 if (ret < 0) {
271 dev_err(&client->dev, "unable to read reg %Xh, %d\n",
272 AUO_PIXCIR_REG_POWER_MODE, ret);
273 return ret;
274 }
275
276 ret &= ~AUO_PIXCIR_POWER_MASK;
277 ret |= mode;
278
279 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret);
280 if (ret) {
281 dev_err(&client->dev, "unable to write reg %Xh, %d\n",
282 AUO_PIXCIR_REG_POWER_MODE, ret);
283 return ret;
284 }
285
286 return 0;
287 }
288
289 static int auo_pixcir_int_config(struct auo_pixcir_ts *ts,
290 int int_setting)
291 {
292 struct i2c_client *client = ts->client;
293 struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
294 int ret;
295
296 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
297 if (ret < 0) {
298 dev_err(&client->dev, "unable to read reg %Xh, %d\n",
299 AUO_PIXCIR_REG_INT_SETTING, ret);
300 return ret;
301 }
302
303 ret &= ~AUO_PIXCIR_INT_MODE_MASK;
304 ret |= int_setting;
305 ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */
306
307 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
308 ret);
309 if (ret < 0) {
310 dev_err(&client->dev, "unable to write reg %Xh, %d\n",
311 AUO_PIXCIR_REG_INT_SETTING, ret);
312 return ret;
313 }
314
315 ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND;
316
317 return 0;
318 }
319
320 /* control the generation of interrupts on the device side */
321 static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable)
322 {
323 struct i2c_client *client = ts->client;
324 int ret;
325
326 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
327 if (ret < 0) {
328 dev_err(&client->dev, "unable to read reg %Xh, %d\n",
329 AUO_PIXCIR_REG_INT_SETTING, ret);
330 return ret;
331 }
332
333 if (enable)
334 ret |= AUO_PIXCIR_INT_ENABLE;
335 else
336 ret &= ~AUO_PIXCIR_INT_ENABLE;
337
338 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
339 ret);
340 if (ret < 0) {
341 dev_err(&client->dev, "unable to write reg %Xh, %d\n",
342 AUO_PIXCIR_REG_INT_SETTING, ret);
343 return ret;
344 }
345
346 return 0;
347 }
348
349 static int auo_pixcir_start(struct auo_pixcir_ts *ts)
350 {
351 struct i2c_client *client = ts->client;
352 int ret;
353
354 ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE);
355 if (ret < 0) {
356 dev_err(&client->dev, "could not set power mode, %d\n",
357 ret);
358 return ret;
359 }
360
361 ts->stopped = false;
362 mb();
363 enable_irq(client->irq);
364
365 ret = auo_pixcir_int_toggle(ts, 1);
366 if (ret < 0) {
367 dev_err(&client->dev, "could not enable interrupt, %d\n",
368 ret);
369 disable_irq(client->irq);
370 return ret;
371 }
372
373 return 0;
374 }
375
376 static int auo_pixcir_stop(struct auo_pixcir_ts *ts)
377 {
378 struct i2c_client *client = ts->client;
379 int ret;
380
381 ret = auo_pixcir_int_toggle(ts, 0);
382 if (ret < 0) {
383 dev_err(&client->dev, "could not disable interrupt, %d\n",
384 ret);
385 return ret;
386 }
387
388 /* disable receiving of interrupts */
389 disable_irq(client->irq);
390 ts->stopped = true;
391 mb();
392 wake_up(&ts->wait);
393
394 return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP);
395 }
396
397 static int auo_pixcir_input_open(struct input_dev *dev)
398 {
399 struct auo_pixcir_ts *ts = input_get_drvdata(dev);
400 int ret;
401
402 ret = auo_pixcir_start(ts);
403 if (ret)
404 return ret;
405
406 return 0;
407 }
408
409 static void auo_pixcir_input_close(struct input_dev *dev)
410 {
411 struct auo_pixcir_ts *ts = input_get_drvdata(dev);
412
413 auo_pixcir_stop(ts);
414
415 return;
416 }
417
418 #ifdef CONFIG_PM_SLEEP
419 static int auo_pixcir_suspend(struct device *dev)
420 {
421 struct i2c_client *client = to_i2c_client(dev);
422 struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
423 struct input_dev *input = ts->input;
424 int ret = 0;
425
426 mutex_lock(&input->mutex);
427
428 /* when configured as wakeup source, device should always wake system
429 * therefore start device if necessary
430 */
431 if (device_may_wakeup(&client->dev)) {
432 /* need to start device if not open, to be wakeup source */
433 if (!input->users) {
434 ret = auo_pixcir_start(ts);
435 if (ret)
436 goto unlock;
437 }
438
439 enable_irq_wake(client->irq);
440 ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP);
441 } else if (input->users) {
442 ret = auo_pixcir_stop(ts);
443 }
444
445 unlock:
446 mutex_unlock(&input->mutex);
447
448 return ret;
449 }
450
451 static int auo_pixcir_resume(struct device *dev)
452 {
453 struct i2c_client *client = to_i2c_client(dev);
454 struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
455 struct input_dev *input = ts->input;
456 int ret = 0;
457
458 mutex_lock(&input->mutex);
459
460 if (device_may_wakeup(&client->dev)) {
461 disable_irq_wake(client->irq);
462
463 /* need to stop device if it was not open on suspend */
464 if (!input->users) {
465 ret = auo_pixcir_stop(ts);
466 if (ret)
467 goto unlock;
468 }
469
470 /* device wakes automatically from SLEEP */
471 } else if (input->users) {
472 ret = auo_pixcir_start(ts);
473 }
474
475 unlock:
476 mutex_unlock(&input->mutex);
477
478 return ret;
479 }
480 #endif
481
482 static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, auo_pixcir_suspend,
483 auo_pixcir_resume);
484
485 static int auo_pixcir_probe(struct i2c_client *client,
486 const struct i2c_device_id *id)
487 {
488 const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
489 struct auo_pixcir_ts *ts;
490 struct input_dev *input_dev;
491 int ret;
492
493 if (!pdata)
494 return -EINVAL;
495
496 ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL);
497 if (!ts)
498 return -ENOMEM;
499
500 ret = gpio_request(pdata->gpio_int, "auo_pixcir_ts_int");
501 if (ret) {
502 dev_err(&client->dev, "request of gpio %d failed, %d\n",
503 pdata->gpio_int, ret);
504 goto err_gpio_int;
505 }
506
507 if (pdata->init_hw)
508 pdata->init_hw(client);
509
510 ts->client = client;
511 ts->touch_ind_mode = 0;
512 init_waitqueue_head(&ts->wait);
513
514 snprintf(ts->phys, sizeof(ts->phys),
515 "%s/input0", dev_name(&client->dev));
516
517 input_dev = input_allocate_device();
518 if (!input_dev) {
519 dev_err(&client->dev, "could not allocate input device\n");
520 goto err_input_alloc;
521 }
522
523 ts->input = input_dev;
524
525 input_dev->name = "AUO-Pixcir touchscreen";
526 input_dev->phys = ts->phys;
527 input_dev->id.bustype = BUS_I2C;
528 input_dev->dev.parent = &client->dev;
529
530 input_dev->open = auo_pixcir_input_open;
531 input_dev->close = auo_pixcir_input_close;
532
533 __set_bit(EV_ABS, input_dev->evbit);
534 __set_bit(EV_KEY, input_dev->evbit);
535
536 __set_bit(BTN_TOUCH, input_dev->keybit);
537
538 /* For single touch */
539 input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0);
540 input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0);
541
542 /* For multi touch */
543 input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
544 pdata->x_max, 0, 0);
545 input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
546 pdata->y_max, 0, 0);
547 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
548 AUO_PIXCIR_MAX_AREA, 0, 0);
549 input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
550 AUO_PIXCIR_MAX_AREA, 0, 0);
551 input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
552
553 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION);
554 if (ret < 0)
555 goto err_fw_vers;
556 dev_info(&client->dev, "firmware version 0x%X\n", ret);
557
558 ret = auo_pixcir_int_config(ts, pdata->int_setting);
559 if (ret)
560 goto err_fw_vers;
561
562 input_set_drvdata(ts->input, ts);
563 ts->stopped = true;
564
565 ret = request_threaded_irq(client->irq, NULL, auo_pixcir_interrupt,
566 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
567 input_dev->name, ts);
568 if (ret) {
569 dev_err(&client->dev, "irq %d requested failed\n", client->irq);
570 goto err_fw_vers;
571 }
572
573 /* stop device and put it into deep sleep until it is opened */
574 ret = auo_pixcir_stop(ts);
575 if (ret < 0)
576 goto err_input_register;
577
578 ret = input_register_device(input_dev);
579 if (ret) {
580 dev_err(&client->dev, "could not register input device\n");
581 goto err_input_register;
582 }
583
584 i2c_set_clientdata(client, ts);
585
586 return 0;
587
588 err_input_register:
589 free_irq(client->irq, ts);
590 err_fw_vers:
591 input_free_device(input_dev);
592 err_input_alloc:
593 if (pdata->exit_hw)
594 pdata->exit_hw(client);
595 gpio_free(pdata->gpio_int);
596 err_gpio_int:
597 kfree(ts);
598
599 return ret;
600 }
601
602 static int auo_pixcir_remove(struct i2c_client *client)
603 {
604 struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
605 const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
606
607 free_irq(client->irq, ts);
608
609 input_unregister_device(ts->input);
610
611 if (pdata->exit_hw)
612 pdata->exit_hw(client);
613
614 gpio_free(pdata->gpio_int);
615
616 kfree(ts);
617
618 return 0;
619 }
620
621 static const struct i2c_device_id auo_pixcir_idtable[] = {
622 { "auo_pixcir_ts", 0 },
623 { }
624 };
625 MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable);
626
627 static struct i2c_driver auo_pixcir_driver = {
628 .driver = {
629 .owner = THIS_MODULE,
630 .name = "auo_pixcir_ts",
631 .pm = &auo_pixcir_pm_ops,
632 },
633 .probe = auo_pixcir_probe,
634 .remove = auo_pixcir_remove,
635 .id_table = auo_pixcir_idtable,
636 };
637
638 module_i2c_driver(auo_pixcir_driver);
639
640 MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver");
641 MODULE_LICENSE("GPL v2");
642 MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
Linux kernel - Deliverables
This page took 0.044598 seconds and 5 git commands to generate.