[media] v4l: vsp1: Set entities functions
[deliverable/linux.git] / drivers / media / platform / vsp1 / vsp1_entity.h
1 /*
2 * vsp1_entity.h -- R-Car VSP1 Base Entity
3 *
4 * Copyright (C) 2013-2014 Renesas Electronics Corporation
5 *
6 * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13 #ifndef __VSP1_ENTITY_H__
14 #define __VSP1_ENTITY_H__
15
16 #include <linux/list.h>
17 #include <linux/spinlock.h>
18
19 #include <media/v4l2-subdev.h>
20
21 struct vsp1_device;
22 struct vsp1_dl_list;
23 struct vsp1_pipeline;
24
25 enum vsp1_entity_type {
26 VSP1_ENTITY_BRU,
27 VSP1_ENTITY_HSI,
28 VSP1_ENTITY_HST,
29 VSP1_ENTITY_LIF,
30 VSP1_ENTITY_LUT,
31 VSP1_ENTITY_RPF,
32 VSP1_ENTITY_SRU,
33 VSP1_ENTITY_UDS,
34 VSP1_ENTITY_WPF,
35 };
36
37 #define VSP1_ENTITY_MAX_INPUTS 5 /* For the BRU */
38
39 /*
40 * struct vsp1_route - Entity routing configuration
41 * @type: Entity type this routing entry is associated with
42 * @index: Entity index this routing entry is associated with
43 * @reg: Output routing configuration register
44 * @inputs: Target node value for each input
45 * @output: Target node value for entity output
46 *
47 * Each $vsp1_route entry describes routing configuration for the entity
48 * specified by the entry's @type and @index. @reg indicates the register that
49 * holds output routing configuration for the entity, and the @inputs array
50 * store the target node value for each input of the entity. The @output field
51 * stores the target node value of the entity output when used as a source for
52 * histogram generation.
53 */
54 struct vsp1_route {
55 enum vsp1_entity_type type;
56 unsigned int index;
57 unsigned int reg;
58 unsigned int inputs[VSP1_ENTITY_MAX_INPUTS];
59 unsigned int output;
60 };
61
62 /**
63 * struct vsp1_entity_operations - Entity operations
64 * @destroy: Destroy the entity.
65 * @set_memory: Setup memory buffer access. This operation applies the settings
66 * stored in the rwpf mem field to the display list. Valid for RPF
67 * and WPF only.
68 * @configure: Setup the hardware based on the entity state (pipeline, formats,
69 * selection rectangles, ...)
70 */
71 struct vsp1_entity_operations {
72 void (*destroy)(struct vsp1_entity *);
73 void (*set_memory)(struct vsp1_entity *, struct vsp1_dl_list *dl);
74 void (*configure)(struct vsp1_entity *, struct vsp1_pipeline *,
75 struct vsp1_dl_list *);
76 };
77
78 struct vsp1_entity {
79 struct vsp1_device *vsp1;
80
81 const struct vsp1_entity_operations *ops;
82
83 enum vsp1_entity_type type;
84 unsigned int index;
85 const struct vsp1_route *route;
86
87 struct list_head list_dev;
88 struct list_head list_pipe;
89
90 struct media_pad *pads;
91 unsigned int source_pad;
92
93 struct media_entity *sink;
94 unsigned int sink_pad;
95
96 struct v4l2_subdev subdev;
97 struct v4l2_subdev_pad_config *config;
98 };
99
100 static inline struct vsp1_entity *to_vsp1_entity(struct v4l2_subdev *subdev)
101 {
102 return container_of(subdev, struct vsp1_entity, subdev);
103 }
104
105 int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
106 const char *name, unsigned int num_pads,
107 const struct v4l2_subdev_ops *ops, u32 function);
108 void vsp1_entity_destroy(struct vsp1_entity *entity);
109
110 extern const struct v4l2_subdev_internal_ops vsp1_subdev_internal_ops;
111
112 int vsp1_entity_link_setup(struct media_entity *entity,
113 const struct media_pad *local,
114 const struct media_pad *remote, u32 flags);
115
116 struct v4l2_subdev_pad_config *
117 vsp1_entity_get_pad_config(struct vsp1_entity *entity,
118 struct v4l2_subdev_pad_config *cfg,
119 enum v4l2_subdev_format_whence which);
120 struct v4l2_mbus_framefmt *
121 vsp1_entity_get_pad_format(struct vsp1_entity *entity,
122 struct v4l2_subdev_pad_config *cfg,
123 unsigned int pad);
124 struct v4l2_rect *
125 vsp1_entity_get_pad_selection(struct vsp1_entity *entity,
126 struct v4l2_subdev_pad_config *cfg,
127 unsigned int pad, unsigned int target);
128 int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
129 struct v4l2_subdev_pad_config *cfg);
130
131 void vsp1_entity_route_setup(struct vsp1_entity *source,
132 struct vsp1_dl_list *dl);
133
134 int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
135 struct v4l2_subdev_pad_config *cfg,
136 struct v4l2_subdev_format *fmt);
137 int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev,
138 struct v4l2_subdev_pad_config *cfg,
139 struct v4l2_subdev_mbus_code_enum *code,
140 const unsigned int *codes, unsigned int ncodes);
141 int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev,
142 struct v4l2_subdev_pad_config *cfg,
143 struct v4l2_subdev_frame_size_enum *fse,
144 unsigned int min_w, unsigned int min_h,
145 unsigned int max_w, unsigned int max_h);
146
147 #endif /* __VSP1_ENTITY_H__ */
This page took 0.034477 seconds and 5 git commands to generate.