2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
14 * and probably many L2 switches ...
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/types.h>
39 #include <linux/fcntl.h>
40 #include <linux/interrupt.h>
41 #include <linux/ptrace.h>
42 #include <linux/ioport.h>
46 #include <linux/tcp.h>
47 #include <linux/udp.h>
48 #include <linux/slab.h>
49 #include <linux/string.h>
50 #include <linux/init.h>
51 #include <linux/timer.h>
52 #include <linux/socket.h>
53 #include <linux/ctype.h>
54 #include <linux/inet.h>
55 #include <linux/bitops.h>
57 #include <asm/system.h>
59 #include <linux/uaccess.h>
60 #include <linux/errno.h>
61 #include <linux/netdevice.h>
62 #include <linux/netpoll.h>
63 #include <linux/inetdevice.h>
64 #include <linux/igmp.h>
65 #include <linux/etherdevice.h>
66 #include <linux/skbuff.h>
68 #include <linux/rtnetlink.h>
69 #include <linux/proc_fs.h>
70 #include <linux/seq_file.h>
71 #include <linux/smp.h>
72 #include <linux/if_ether.h>
74 #include <linux/mii.h>
75 #include <linux/ethtool.h>
76 #include <linux/if_vlan.h>
77 #include <linux/if_bonding.h>
78 #include <linux/jiffies.h>
79 #include <net/route.h>
80 #include <net/net_namespace.h>
81 #include <net/netns/generic.h>
86 /*---------------------------- Module parameters ----------------------------*/
88 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
89 #define BOND_LINK_MON_INTERV 0
90 #define BOND_LINK_ARP_INTERV 0
92 static int max_bonds
= BOND_DEFAULT_MAX_BONDS
;
93 static int num_grat_arp
= 1;
94 static int num_unsol_na
= 1;
95 static int miimon
= BOND_LINK_MON_INTERV
;
98 static int use_carrier
= 1;
100 static char *primary
;
101 static char *primary_reselect
;
102 static char *lacp_rate
;
103 static char *ad_select
;
104 static char *xmit_hash_policy
;
105 static int arp_interval
= BOND_LINK_ARP_INTERV
;
106 static char *arp_ip_target
[BOND_MAX_ARP_TARGETS
];
107 static char *arp_validate
;
108 static char *fail_over_mac
;
109 static struct bond_params bonding_defaults
;
111 module_param(max_bonds
, int, 0);
112 MODULE_PARM_DESC(max_bonds
, "Max number of bonded devices");
113 module_param(num_grat_arp
, int, 0644);
114 MODULE_PARM_DESC(num_grat_arp
, "Number of gratuitous ARP packets to send on failover event");
115 module_param(num_unsol_na
, int, 0644);
116 MODULE_PARM_DESC(num_unsol_na
, "Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event");
117 module_param(miimon
, int, 0);
118 MODULE_PARM_DESC(miimon
, "Link check interval in milliseconds");
119 module_param(updelay
, int, 0);
120 MODULE_PARM_DESC(updelay
, "Delay before considering link up, in milliseconds");
121 module_param(downdelay
, int, 0);
122 MODULE_PARM_DESC(downdelay
, "Delay before considering link down, "
124 module_param(use_carrier
, int, 0);
125 MODULE_PARM_DESC(use_carrier
, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
126 "0 for off, 1 for on (default)");
127 module_param(mode
, charp
, 0);
128 MODULE_PARM_DESC(mode
, "Mode of operation : 0 for balance-rr, "
129 "1 for active-backup, 2 for balance-xor, "
130 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
131 "6 for balance-alb");
132 module_param(primary
, charp
, 0);
133 MODULE_PARM_DESC(primary
, "Primary network device to use");
134 module_param(primary_reselect
, charp
, 0);
135 MODULE_PARM_DESC(primary_reselect
, "Reselect primary slave "
137 "0 for always (default), "
138 "1 for only if speed of primary is "
140 "2 for only on active slave "
142 module_param(lacp_rate
, charp
, 0);
143 MODULE_PARM_DESC(lacp_rate
, "LACPDU tx rate to request from 802.3ad partner "
145 module_param(ad_select
, charp
, 0);
146 MODULE_PARM_DESC(ad_select
, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)");
147 module_param(xmit_hash_policy
, charp
, 0);
148 MODULE_PARM_DESC(xmit_hash_policy
, "XOR hashing method: 0 for layer 2 (default)"
149 ", 1 for layer 3+4");
150 module_param(arp_interval
, int, 0);
151 MODULE_PARM_DESC(arp_interval
, "arp interval in milliseconds");
152 module_param_array(arp_ip_target
, charp
, NULL
, 0);
153 MODULE_PARM_DESC(arp_ip_target
, "arp targets in n.n.n.n form");
154 module_param(arp_validate
, charp
, 0);
155 MODULE_PARM_DESC(arp_validate
, "validate src/dst of ARP probes: none (default), active, backup or all");
156 module_param(fail_over_mac
, charp
, 0);
157 MODULE_PARM_DESC(fail_over_mac
, "For active-backup, do not set all slaves to the same MAC. none (default), active or follow");
159 /*----------------------------- Global variables ----------------------------*/
161 static const char * const version
=
162 DRV_DESCRIPTION
": v" DRV_VERSION
" (" DRV_RELDATE
")\n";
164 int bond_net_id __read_mostly
;
166 static __be32 arp_target
[BOND_MAX_ARP_TARGETS
];
167 static int arp_ip_count
;
168 static int bond_mode
= BOND_MODE_ROUNDROBIN
;
169 static int xmit_hashtype
= BOND_XMIT_POLICY_LAYER2
;
170 static int lacp_fast
;
171 static int disable_netpoll
= 1;
173 const struct bond_parm_tbl bond_lacp_tbl
[] = {
174 { "slow", AD_LACP_SLOW
},
175 { "fast", AD_LACP_FAST
},
179 const struct bond_parm_tbl bond_mode_tbl
[] = {
180 { "balance-rr", BOND_MODE_ROUNDROBIN
},
181 { "active-backup", BOND_MODE_ACTIVEBACKUP
},
182 { "balance-xor", BOND_MODE_XOR
},
183 { "broadcast", BOND_MODE_BROADCAST
},
184 { "802.3ad", BOND_MODE_8023AD
},
185 { "balance-tlb", BOND_MODE_TLB
},
186 { "balance-alb", BOND_MODE_ALB
},
190 const struct bond_parm_tbl xmit_hashtype_tbl
[] = {
191 { "layer2", BOND_XMIT_POLICY_LAYER2
},
192 { "layer3+4", BOND_XMIT_POLICY_LAYER34
},
193 { "layer2+3", BOND_XMIT_POLICY_LAYER23
},
197 const struct bond_parm_tbl arp_validate_tbl
[] = {
198 { "none", BOND_ARP_VALIDATE_NONE
},
199 { "active", BOND_ARP_VALIDATE_ACTIVE
},
200 { "backup", BOND_ARP_VALIDATE_BACKUP
},
201 { "all", BOND_ARP_VALIDATE_ALL
},
205 const struct bond_parm_tbl fail_over_mac_tbl
[] = {
206 { "none", BOND_FOM_NONE
},
207 { "active", BOND_FOM_ACTIVE
},
208 { "follow", BOND_FOM_FOLLOW
},
212 const struct bond_parm_tbl pri_reselect_tbl
[] = {
213 { "always", BOND_PRI_RESELECT_ALWAYS
},
214 { "better", BOND_PRI_RESELECT_BETTER
},
215 { "failure", BOND_PRI_RESELECT_FAILURE
},
219 struct bond_parm_tbl ad_select_tbl
[] = {
220 { "stable", BOND_AD_STABLE
},
221 { "bandwidth", BOND_AD_BANDWIDTH
},
222 { "count", BOND_AD_COUNT
},
226 /*-------------------------- Forward declarations ---------------------------*/
228 static void bond_send_gratuitous_arp(struct bonding
*bond
);
229 static int bond_init(struct net_device
*bond_dev
);
230 static void bond_uninit(struct net_device
*bond_dev
);
232 /*---------------------------- General routines -----------------------------*/
234 static const char *bond_mode_name(int mode
)
236 static const char *names
[] = {
237 [BOND_MODE_ROUNDROBIN
] = "load balancing (round-robin)",
238 [BOND_MODE_ACTIVEBACKUP
] = "fault-tolerance (active-backup)",
239 [BOND_MODE_XOR
] = "load balancing (xor)",
240 [BOND_MODE_BROADCAST
] = "fault-tolerance (broadcast)",
241 [BOND_MODE_8023AD
] = "IEEE 802.3ad Dynamic link aggregation",
242 [BOND_MODE_TLB
] = "transmit load balancing",
243 [BOND_MODE_ALB
] = "adaptive load balancing",
246 if (mode
< 0 || mode
> BOND_MODE_ALB
)
252 /*---------------------------------- VLAN -----------------------------------*/
255 * bond_add_vlan - add a new vlan id on bond
256 * @bond: bond that got the notification
257 * @vlan_id: the vlan id to add
259 * Returns -ENOMEM if allocation failed.
261 static int bond_add_vlan(struct bonding
*bond
, unsigned short vlan_id
)
263 struct vlan_entry
*vlan
;
265 pr_debug("bond: %s, vlan id %d\n",
266 (bond
? bond
->dev
->name
: "None"), vlan_id
);
268 vlan
= kzalloc(sizeof(struct vlan_entry
), GFP_KERNEL
);
272 INIT_LIST_HEAD(&vlan
->vlan_list
);
273 vlan
->vlan_id
= vlan_id
;
275 write_lock_bh(&bond
->lock
);
277 list_add_tail(&vlan
->vlan_list
, &bond
->vlan_list
);
279 write_unlock_bh(&bond
->lock
);
281 pr_debug("added VLAN ID %d on bond %s\n", vlan_id
, bond
->dev
->name
);
287 * bond_del_vlan - delete a vlan id from bond
288 * @bond: bond that got the notification
289 * @vlan_id: the vlan id to delete
291 * returns -ENODEV if @vlan_id was not found in @bond.
293 static int bond_del_vlan(struct bonding
*bond
, unsigned short vlan_id
)
295 struct vlan_entry
*vlan
;
298 pr_debug("bond: %s, vlan id %d\n", bond
->dev
->name
, vlan_id
);
300 write_lock_bh(&bond
->lock
);
302 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
) {
303 if (vlan
->vlan_id
== vlan_id
) {
304 list_del(&vlan
->vlan_list
);
306 if (bond_is_lb(bond
))
307 bond_alb_clear_vlan(bond
, vlan_id
);
309 pr_debug("removed VLAN ID %d from bond %s\n",
310 vlan_id
, bond
->dev
->name
);
314 if (list_empty(&bond
->vlan_list
) &&
315 (bond
->slave_cnt
== 0)) {
316 /* Last VLAN removed and no slaves, so
317 * restore block on adding VLANs. This will
318 * be removed once new slaves that are not
319 * VLAN challenged will be added.
321 bond
->dev
->features
|= NETIF_F_VLAN_CHALLENGED
;
329 pr_debug("couldn't find VLAN ID %d in bond %s\n",
330 vlan_id
, bond
->dev
->name
);
333 write_unlock_bh(&bond
->lock
);
338 * bond_has_challenged_slaves
339 * @bond: the bond we're working on
341 * Searches the slave list. Returns 1 if a vlan challenged slave
342 * was found, 0 otherwise.
344 * Assumes bond->lock is held.
346 static int bond_has_challenged_slaves(struct bonding
*bond
)
351 bond_for_each_slave(bond
, slave
, i
) {
352 if (slave
->dev
->features
& NETIF_F_VLAN_CHALLENGED
) {
353 pr_debug("found VLAN challenged slave - %s\n",
359 pr_debug("no VLAN challenged slaves found\n");
364 * bond_next_vlan - safely skip to the next item in the vlans list.
365 * @bond: the bond we're working on
366 * @curr: item we're advancing from
368 * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
369 * or @curr->next otherwise (even if it is @curr itself again).
371 * Caller must hold bond->lock
373 struct vlan_entry
*bond_next_vlan(struct bonding
*bond
, struct vlan_entry
*curr
)
375 struct vlan_entry
*next
, *last
;
377 if (list_empty(&bond
->vlan_list
))
381 next
= list_entry(bond
->vlan_list
.next
,
382 struct vlan_entry
, vlan_list
);
384 last
= list_entry(bond
->vlan_list
.prev
,
385 struct vlan_entry
, vlan_list
);
387 next
= list_entry(bond
->vlan_list
.next
,
388 struct vlan_entry
, vlan_list
);
390 next
= list_entry(curr
->vlan_list
.next
,
391 struct vlan_entry
, vlan_list
);
399 * bond_dev_queue_xmit - Prepare skb for xmit.
401 * @bond: bond device that got this skb for tx.
402 * @skb: hw accel VLAN tagged skb to transmit
403 * @slave_dev: slave that is supposed to xmit this skbuff
405 * When the bond gets an skb to transmit that is
406 * already hardware accelerated VLAN tagged, and it
407 * needs to relay this skb to a slave that is not
408 * hw accel capable, the skb needs to be "unaccelerated",
409 * i.e. strip the hwaccel tag and re-insert it as part
412 int bond_dev_queue_xmit(struct bonding
*bond
, struct sk_buff
*skb
,
413 struct net_device
*slave_dev
)
415 unsigned short uninitialized_var(vlan_id
);
417 if (!list_empty(&bond
->vlan_list
) &&
418 !(slave_dev
->features
& NETIF_F_HW_VLAN_TX
) &&
419 vlan_get_tag(skb
, &vlan_id
) == 0) {
420 skb
->dev
= slave_dev
;
421 skb
= vlan_put_tag(skb
, vlan_id
);
423 /* vlan_put_tag() frees the skb in case of error,
424 * so return success here so the calling functions
425 * won't attempt to free is again.
430 skb
->dev
= slave_dev
;
434 #ifdef CONFIG_NET_POLL_CONTROLLER
435 if (unlikely(bond
->dev
->priv_flags
& IFF_IN_NETPOLL
)) {
436 struct netpoll
*np
= bond
->dev
->npinfo
->netpoll
;
437 slave_dev
->npinfo
= bond
->dev
->npinfo
;
438 np
->real_dev
= np
->dev
= skb
->dev
;
439 slave_dev
->priv_flags
|= IFF_IN_NETPOLL
;
440 netpoll_send_skb(np
, skb
);
441 slave_dev
->priv_flags
&= ~IFF_IN_NETPOLL
;
451 * In the following 3 functions, bond_vlan_rx_register(), bond_vlan_rx_add_vid
452 * and bond_vlan_rx_kill_vid, We don't protect the slave list iteration with a
454 * a. This operation is performed in IOCTL context,
455 * b. The operation is protected by the RTNL semaphore in the 8021q code,
456 * c. Holding a lock with BH disabled while directly calling a base driver
457 * entry point is generally a BAD idea.
459 * The design of synchronization/protection for this operation in the 8021q
460 * module is good for one or more VLAN devices over a single physical device
461 * and cannot be extended for a teaming solution like bonding, so there is a
462 * potential race condition here where a net device from the vlan group might
463 * be referenced (either by a base driver or the 8021q code) while it is being
464 * removed from the system. However, it turns out we're not making matters
465 * worse, and if it works for regular VLAN usage it will work here too.
469 * bond_vlan_rx_register - Propagates registration to slaves
470 * @bond_dev: bonding net device that got called
471 * @grp: vlan group being registered
473 static void bond_vlan_rx_register(struct net_device
*bond_dev
,
474 struct vlan_group
*grp
)
476 struct bonding
*bond
= netdev_priv(bond_dev
);
482 bond_for_each_slave(bond
, slave
, i
) {
483 struct net_device
*slave_dev
= slave
->dev
;
484 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
486 if ((slave_dev
->features
& NETIF_F_HW_VLAN_RX
) &&
487 slave_ops
->ndo_vlan_rx_register
) {
488 slave_ops
->ndo_vlan_rx_register(slave_dev
, grp
);
494 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
495 * @bond_dev: bonding net device that got called
496 * @vid: vlan id being added
498 static void bond_vlan_rx_add_vid(struct net_device
*bond_dev
, uint16_t vid
)
500 struct bonding
*bond
= netdev_priv(bond_dev
);
504 bond_for_each_slave(bond
, slave
, i
) {
505 struct net_device
*slave_dev
= slave
->dev
;
506 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
508 if ((slave_dev
->features
& NETIF_F_HW_VLAN_FILTER
) &&
509 slave_ops
->ndo_vlan_rx_add_vid
) {
510 slave_ops
->ndo_vlan_rx_add_vid(slave_dev
, vid
);
514 res
= bond_add_vlan(bond
, vid
);
516 pr_err("%s: Error: Failed to add vlan id %d\n",
517 bond_dev
->name
, vid
);
522 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
523 * @bond_dev: bonding net device that got called
524 * @vid: vlan id being removed
526 static void bond_vlan_rx_kill_vid(struct net_device
*bond_dev
, uint16_t vid
)
528 struct bonding
*bond
= netdev_priv(bond_dev
);
530 struct net_device
*vlan_dev
;
533 bond_for_each_slave(bond
, slave
, i
) {
534 struct net_device
*slave_dev
= slave
->dev
;
535 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
537 if ((slave_dev
->features
& NETIF_F_HW_VLAN_FILTER
) &&
538 slave_ops
->ndo_vlan_rx_kill_vid
) {
539 /* Save and then restore vlan_dev in the grp array,
540 * since the slave's driver might clear it.
542 vlan_dev
= vlan_group_get_device(bond
->vlgrp
, vid
);
543 slave_ops
->ndo_vlan_rx_kill_vid(slave_dev
, vid
);
544 vlan_group_set_device(bond
->vlgrp
, vid
, vlan_dev
);
548 res
= bond_del_vlan(bond
, vid
);
550 pr_err("%s: Error: Failed to remove vlan id %d\n",
551 bond_dev
->name
, vid
);
555 static void bond_add_vlans_on_slave(struct bonding
*bond
, struct net_device
*slave_dev
)
557 struct vlan_entry
*vlan
;
558 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
560 write_lock_bh(&bond
->lock
);
562 if (list_empty(&bond
->vlan_list
))
565 if ((slave_dev
->features
& NETIF_F_HW_VLAN_RX
) &&
566 slave_ops
->ndo_vlan_rx_register
)
567 slave_ops
->ndo_vlan_rx_register(slave_dev
, bond
->vlgrp
);
569 if (!(slave_dev
->features
& NETIF_F_HW_VLAN_FILTER
) ||
570 !(slave_ops
->ndo_vlan_rx_add_vid
))
573 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
)
574 slave_ops
->ndo_vlan_rx_add_vid(slave_dev
, vlan
->vlan_id
);
577 write_unlock_bh(&bond
->lock
);
580 static void bond_del_vlans_from_slave(struct bonding
*bond
,
581 struct net_device
*slave_dev
)
583 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
584 struct vlan_entry
*vlan
;
585 struct net_device
*vlan_dev
;
587 write_lock_bh(&bond
->lock
);
589 if (list_empty(&bond
->vlan_list
))
592 if (!(slave_dev
->features
& NETIF_F_HW_VLAN_FILTER
) ||
593 !(slave_ops
->ndo_vlan_rx_kill_vid
))
596 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
) {
597 /* Save and then restore vlan_dev in the grp array,
598 * since the slave's driver might clear it.
600 vlan_dev
= vlan_group_get_device(bond
->vlgrp
, vlan
->vlan_id
);
601 slave_ops
->ndo_vlan_rx_kill_vid(slave_dev
, vlan
->vlan_id
);
602 vlan_group_set_device(bond
->vlgrp
, vlan
->vlan_id
, vlan_dev
);
606 if ((slave_dev
->features
& NETIF_F_HW_VLAN_RX
) &&
607 slave_ops
->ndo_vlan_rx_register
)
608 slave_ops
->ndo_vlan_rx_register(slave_dev
, NULL
);
611 write_unlock_bh(&bond
->lock
);
614 /*------------------------------- Link status -------------------------------*/
617 * Set the carrier state for the master according to the state of its
618 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
619 * do special 802.3ad magic.
621 * Returns zero if carrier state does not change, nonzero if it does.
623 static int bond_set_carrier(struct bonding
*bond
)
628 if (bond
->slave_cnt
== 0)
631 if (bond
->params
.mode
== BOND_MODE_8023AD
)
632 return bond_3ad_set_carrier(bond
);
634 bond_for_each_slave(bond
, slave
, i
) {
635 if (slave
->link
== BOND_LINK_UP
) {
636 if (!netif_carrier_ok(bond
->dev
)) {
637 netif_carrier_on(bond
->dev
);
645 if (netif_carrier_ok(bond
->dev
)) {
646 netif_carrier_off(bond
->dev
);
653 * Get link speed and duplex from the slave's base driver
654 * using ethtool. If for some reason the call fails or the
655 * values are invalid, fake speed and duplex to 100/Full
658 static int bond_update_speed_duplex(struct slave
*slave
)
660 struct net_device
*slave_dev
= slave
->dev
;
661 struct ethtool_cmd etool
;
664 /* Fake speed and duplex */
665 slave
->speed
= SPEED_100
;
666 slave
->duplex
= DUPLEX_FULL
;
668 if (!slave_dev
->ethtool_ops
|| !slave_dev
->ethtool_ops
->get_settings
)
671 res
= slave_dev
->ethtool_ops
->get_settings(slave_dev
, &etool
);
675 switch (etool
.speed
) {
685 switch (etool
.duplex
) {
693 slave
->speed
= etool
.speed
;
694 slave
->duplex
= etool
.duplex
;
700 * if <dev> supports MII link status reporting, check its link status.
702 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
703 * depending upon the setting of the use_carrier parameter.
705 * Return either BMSR_LSTATUS, meaning that the link is up (or we
706 * can't tell and just pretend it is), or 0, meaning that the link is
709 * If reporting is non-zero, instead of faking link up, return -1 if
710 * both ETHTOOL and MII ioctls fail (meaning the device does not
711 * support them). If use_carrier is set, return whatever it says.
712 * It'd be nice if there was a good way to tell if a driver supports
713 * netif_carrier, but there really isn't.
715 static int bond_check_dev_link(struct bonding
*bond
,
716 struct net_device
*slave_dev
, int reporting
)
718 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
719 int (*ioctl
)(struct net_device
*, struct ifreq
*, int);
721 struct mii_ioctl_data
*mii
;
723 if (!reporting
&& !netif_running(slave_dev
))
726 if (bond
->params
.use_carrier
)
727 return netif_carrier_ok(slave_dev
) ? BMSR_LSTATUS
: 0;
729 /* Try to get link status using Ethtool first. */
730 if (slave_dev
->ethtool_ops
) {
731 if (slave_dev
->ethtool_ops
->get_link
) {
734 link
= slave_dev
->ethtool_ops
->get_link(slave_dev
);
736 return link
? BMSR_LSTATUS
: 0;
740 /* Ethtool can't be used, fallback to MII ioctls. */
741 ioctl
= slave_ops
->ndo_do_ioctl
;
743 /* TODO: set pointer to correct ioctl on a per team member */
744 /* bases to make this more efficient. that is, once */
745 /* we determine the correct ioctl, we will always */
746 /* call it and not the others for that team */
750 * We cannot assume that SIOCGMIIPHY will also read a
751 * register; not all network drivers (e.g., e100)
755 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
756 strncpy(ifr
.ifr_name
, slave_dev
->name
, IFNAMSIZ
);
758 if (IOCTL(slave_dev
, &ifr
, SIOCGMIIPHY
) == 0) {
759 mii
->reg_num
= MII_BMSR
;
760 if (IOCTL(slave_dev
, &ifr
, SIOCGMIIREG
) == 0)
761 return mii
->val_out
& BMSR_LSTATUS
;
766 * If reporting, report that either there's no dev->do_ioctl,
767 * or both SIOCGMIIREG and get_link failed (meaning that we
768 * cannot report link status). If not reporting, pretend
771 return reporting
? -1 : BMSR_LSTATUS
;
774 /*----------------------------- Multicast list ------------------------------*/
777 * Push the promiscuity flag down to appropriate slaves
779 static int bond_set_promiscuity(struct bonding
*bond
, int inc
)
782 if (USES_PRIMARY(bond
->params
.mode
)) {
783 /* write lock already acquired */
784 if (bond
->curr_active_slave
) {
785 err
= dev_set_promiscuity(bond
->curr_active_slave
->dev
,
791 bond_for_each_slave(bond
, slave
, i
) {
792 err
= dev_set_promiscuity(slave
->dev
, inc
);
801 * Push the allmulti flag down to all slaves
803 static int bond_set_allmulti(struct bonding
*bond
, int inc
)
806 if (USES_PRIMARY(bond
->params
.mode
)) {
807 /* write lock already acquired */
808 if (bond
->curr_active_slave
) {
809 err
= dev_set_allmulti(bond
->curr_active_slave
->dev
,
815 bond_for_each_slave(bond
, slave
, i
) {
816 err
= dev_set_allmulti(slave
->dev
, inc
);
825 * Add a Multicast address to slaves
828 static void bond_mc_add(struct bonding
*bond
, void *addr
)
830 if (USES_PRIMARY(bond
->params
.mode
)) {
831 /* write lock already acquired */
832 if (bond
->curr_active_slave
)
833 dev_mc_add(bond
->curr_active_slave
->dev
, addr
);
838 bond_for_each_slave(bond
, slave
, i
)
839 dev_mc_add(slave
->dev
, addr
);
844 * Remove a multicast address from slave
847 static void bond_mc_del(struct bonding
*bond
, void *addr
)
849 if (USES_PRIMARY(bond
->params
.mode
)) {
850 /* write lock already acquired */
851 if (bond
->curr_active_slave
)
852 dev_mc_del(bond
->curr_active_slave
->dev
, addr
);
856 bond_for_each_slave(bond
, slave
, i
) {
857 dev_mc_del(slave
->dev
, addr
);
864 * Retrieve the list of registered multicast addresses for the bonding
865 * device and retransmit an IGMP JOIN request to the current active
868 static void bond_resend_igmp_join_requests(struct bonding
*bond
)
870 struct in_device
*in_dev
;
871 struct ip_mc_list
*im
;
874 in_dev
= __in_dev_get_rcu(bond
->dev
);
876 for (im
= in_dev
->mc_list
; im
; im
= im
->next
)
877 ip_mc_rejoin_group(im
);
884 * flush all members of flush->mc_list from device dev->mc_list
886 static void bond_mc_list_flush(struct net_device
*bond_dev
,
887 struct net_device
*slave_dev
)
889 struct bonding
*bond
= netdev_priv(bond_dev
);
890 struct netdev_hw_addr
*ha
;
892 netdev_for_each_mc_addr(ha
, bond_dev
)
893 dev_mc_del(slave_dev
, ha
->addr
);
895 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
896 /* del lacpdu mc addr from mc list */
897 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
899 dev_mc_del(slave_dev
, lacpdu_multicast
);
903 /*--------------------------- Active slave change ---------------------------*/
906 * Update the mc list and multicast-related flags for the new and
907 * old active slaves (if any) according to the multicast mode, and
908 * promiscuous flags unconditionally.
910 static void bond_mc_swap(struct bonding
*bond
, struct slave
*new_active
,
911 struct slave
*old_active
)
913 struct netdev_hw_addr
*ha
;
915 if (!USES_PRIMARY(bond
->params
.mode
))
916 /* nothing to do - mc list is already up-to-date on
922 if (bond
->dev
->flags
& IFF_PROMISC
)
923 dev_set_promiscuity(old_active
->dev
, -1);
925 if (bond
->dev
->flags
& IFF_ALLMULTI
)
926 dev_set_allmulti(old_active
->dev
, -1);
928 netdev_for_each_mc_addr(ha
, bond
->dev
)
929 dev_mc_del(old_active
->dev
, ha
->addr
);
933 /* FIXME: Signal errors upstream. */
934 if (bond
->dev
->flags
& IFF_PROMISC
)
935 dev_set_promiscuity(new_active
->dev
, 1);
937 if (bond
->dev
->flags
& IFF_ALLMULTI
)
938 dev_set_allmulti(new_active
->dev
, 1);
940 netdev_for_each_mc_addr(ha
, bond
->dev
)
941 dev_mc_add(new_active
->dev
, ha
->addr
);
942 bond_resend_igmp_join_requests(bond
);
947 * bond_do_fail_over_mac
949 * Perform special MAC address swapping for fail_over_mac settings
951 * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
953 static void bond_do_fail_over_mac(struct bonding
*bond
,
954 struct slave
*new_active
,
955 struct slave
*old_active
)
956 __releases(&bond
->curr_slave_lock
)
957 __releases(&bond
->lock
)
958 __acquires(&bond
->lock
)
959 __acquires(&bond
->curr_slave_lock
)
961 u8 tmp_mac
[ETH_ALEN
];
962 struct sockaddr saddr
;
965 switch (bond
->params
.fail_over_mac
) {
966 case BOND_FOM_ACTIVE
:
968 memcpy(bond
->dev
->dev_addr
, new_active
->dev
->dev_addr
,
969 new_active
->dev
->addr_len
);
971 case BOND_FOM_FOLLOW
:
973 * if new_active && old_active, swap them
974 * if just old_active, do nothing (going to no active slave)
975 * if just new_active, set new_active to bond's MAC
980 write_unlock_bh(&bond
->curr_slave_lock
);
981 read_unlock(&bond
->lock
);
984 memcpy(tmp_mac
, new_active
->dev
->dev_addr
, ETH_ALEN
);
985 memcpy(saddr
.sa_data
, old_active
->dev
->dev_addr
,
987 saddr
.sa_family
= new_active
->dev
->type
;
989 memcpy(saddr
.sa_data
, bond
->dev
->dev_addr
, ETH_ALEN
);
990 saddr
.sa_family
= bond
->dev
->type
;
993 rv
= dev_set_mac_address(new_active
->dev
, &saddr
);
995 pr_err("%s: Error %d setting MAC of slave %s\n",
996 bond
->dev
->name
, -rv
, new_active
->dev
->name
);
1003 memcpy(saddr
.sa_data
, tmp_mac
, ETH_ALEN
);
1004 saddr
.sa_family
= old_active
->dev
->type
;
1006 rv
= dev_set_mac_address(old_active
->dev
, &saddr
);
1008 pr_err("%s: Error %d setting MAC of slave %s\n",
1009 bond
->dev
->name
, -rv
, new_active
->dev
->name
);
1011 read_lock(&bond
->lock
);
1012 write_lock_bh(&bond
->curr_slave_lock
);
1015 pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n",
1016 bond
->dev
->name
, bond
->params
.fail_over_mac
);
1022 static bool bond_should_change_active(struct bonding
*bond
)
1024 struct slave
*prim
= bond
->primary_slave
;
1025 struct slave
*curr
= bond
->curr_active_slave
;
1027 if (!prim
|| !curr
|| curr
->link
!= BOND_LINK_UP
)
1029 if (bond
->force_primary
) {
1030 bond
->force_primary
= false;
1033 if (bond
->params
.primary_reselect
== BOND_PRI_RESELECT_BETTER
&&
1034 (prim
->speed
< curr
->speed
||
1035 (prim
->speed
== curr
->speed
&& prim
->duplex
<= curr
->duplex
)))
1037 if (bond
->params
.primary_reselect
== BOND_PRI_RESELECT_FAILURE
)
1043 * find_best_interface - select the best available slave to be the active one
1044 * @bond: our bonding struct
1046 * Warning: Caller must hold curr_slave_lock for writing.
1048 static struct slave
*bond_find_best_slave(struct bonding
*bond
)
1050 struct slave
*new_active
, *old_active
;
1051 struct slave
*bestslave
= NULL
;
1052 int mintime
= bond
->params
.updelay
;
1055 new_active
= bond
->curr_active_slave
;
1057 if (!new_active
) { /* there were no active slaves left */
1058 if (bond
->slave_cnt
> 0) /* found one slave */
1059 new_active
= bond
->first_slave
;
1061 return NULL
; /* still no slave, return NULL */
1064 if ((bond
->primary_slave
) &&
1065 bond
->primary_slave
->link
== BOND_LINK_UP
&&
1066 bond_should_change_active(bond
)) {
1067 new_active
= bond
->primary_slave
;
1070 /* remember where to stop iterating over the slaves */
1071 old_active
= new_active
;
1073 bond_for_each_slave_from(bond
, new_active
, i
, old_active
) {
1074 if (new_active
->link
== BOND_LINK_UP
) {
1076 } else if (new_active
->link
== BOND_LINK_BACK
&&
1077 IS_UP(new_active
->dev
)) {
1078 /* link up, but waiting for stabilization */
1079 if (new_active
->delay
< mintime
) {
1080 mintime
= new_active
->delay
;
1081 bestslave
= new_active
;
1090 * change_active_interface - change the active slave into the specified one
1091 * @bond: our bonding struct
1092 * @new: the new slave to make the active one
1094 * Set the new slave to the bond's settings and unset them on the old
1095 * curr_active_slave.
1096 * Setting include flags, mc-list, promiscuity, allmulti, etc.
1098 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
1099 * because it is apparently the best available slave we have, even though its
1100 * updelay hasn't timed out yet.
1102 * If new_active is not NULL, caller must hold bond->lock for read and
1103 * curr_slave_lock for write_bh.
1105 void bond_change_active_slave(struct bonding
*bond
, struct slave
*new_active
)
1107 struct slave
*old_active
= bond
->curr_active_slave
;
1109 if (old_active
== new_active
)
1113 new_active
->jiffies
= jiffies
;
1115 if (new_active
->link
== BOND_LINK_BACK
) {
1116 if (USES_PRIMARY(bond
->params
.mode
)) {
1117 pr_info("%s: making interface %s the new active one %d ms earlier.\n",
1118 bond
->dev
->name
, new_active
->dev
->name
,
1119 (bond
->params
.updelay
- new_active
->delay
) * bond
->params
.miimon
);
1122 new_active
->delay
= 0;
1123 new_active
->link
= BOND_LINK_UP
;
1125 if (bond
->params
.mode
== BOND_MODE_8023AD
)
1126 bond_3ad_handle_link_change(new_active
, BOND_LINK_UP
);
1128 if (bond_is_lb(bond
))
1129 bond_alb_handle_link_change(bond
, new_active
, BOND_LINK_UP
);
1131 if (USES_PRIMARY(bond
->params
.mode
)) {
1132 pr_info("%s: making interface %s the new active one.\n",
1133 bond
->dev
->name
, new_active
->dev
->name
);
1138 if (USES_PRIMARY(bond
->params
.mode
))
1139 bond_mc_swap(bond
, new_active
, old_active
);
1141 if (bond_is_lb(bond
)) {
1142 bond_alb_handle_active_change(bond
, new_active
);
1144 bond_set_slave_inactive_flags(old_active
);
1146 bond_set_slave_active_flags(new_active
);
1148 bond
->curr_active_slave
= new_active
;
1151 if (bond
->params
.mode
== BOND_MODE_ACTIVEBACKUP
) {
1153 bond_set_slave_inactive_flags(old_active
);
1156 bond_set_slave_active_flags(new_active
);
1158 if (bond
->params
.fail_over_mac
)
1159 bond_do_fail_over_mac(bond
, new_active
,
1162 bond
->send_grat_arp
= bond
->params
.num_grat_arp
;
1163 bond_send_gratuitous_arp(bond
);
1165 bond
->send_unsol_na
= bond
->params
.num_unsol_na
;
1166 bond_send_unsolicited_na(bond
);
1168 write_unlock_bh(&bond
->curr_slave_lock
);
1169 read_unlock(&bond
->lock
);
1171 netdev_bonding_change(bond
->dev
, NETDEV_BONDING_FAILOVER
);
1173 read_lock(&bond
->lock
);
1174 write_lock_bh(&bond
->curr_slave_lock
);
1178 /* resend IGMP joins since all were sent on curr_active_slave */
1179 if (bond
->params
.mode
== BOND_MODE_ROUNDROBIN
) {
1180 bond_resend_igmp_join_requests(bond
);
1185 * bond_select_active_slave - select a new active slave, if needed
1186 * @bond: our bonding struct
1188 * This functions should be called when one of the following occurs:
1189 * - The old curr_active_slave has been released or lost its link.
1190 * - The primary_slave has got its link back.
1191 * - A slave has got its link back and there's no old curr_active_slave.
1193 * Caller must hold bond->lock for read and curr_slave_lock for write_bh.
1195 void bond_select_active_slave(struct bonding
*bond
)
1197 struct slave
*best_slave
;
1200 best_slave
= bond_find_best_slave(bond
);
1201 if (best_slave
!= bond
->curr_active_slave
) {
1202 bond_change_active_slave(bond
, best_slave
);
1203 rv
= bond_set_carrier(bond
);
1207 if (netif_carrier_ok(bond
->dev
)) {
1208 pr_info("%s: first active interface up!\n",
1211 pr_info("%s: now running without any active interface !\n",
1217 /*--------------------------- slave list handling ---------------------------*/
1220 * This function attaches the slave to the end of list.
1222 * bond->lock held for writing by caller.
1224 static void bond_attach_slave(struct bonding
*bond
, struct slave
*new_slave
)
1226 if (bond
->first_slave
== NULL
) { /* attaching the first slave */
1227 new_slave
->next
= new_slave
;
1228 new_slave
->prev
= new_slave
;
1229 bond
->first_slave
= new_slave
;
1231 new_slave
->next
= bond
->first_slave
;
1232 new_slave
->prev
= bond
->first_slave
->prev
;
1233 new_slave
->next
->prev
= new_slave
;
1234 new_slave
->prev
->next
= new_slave
;
1241 * This function detaches the slave from the list.
1242 * WARNING: no check is made to verify if the slave effectively
1243 * belongs to <bond>.
1244 * Nothing is freed on return, structures are just unchained.
1245 * If any slave pointer in bond was pointing to <slave>,
1246 * it should be changed by the calling function.
1248 * bond->lock held for writing by caller.
1250 static void bond_detach_slave(struct bonding
*bond
, struct slave
*slave
)
1253 slave
->next
->prev
= slave
->prev
;
1256 slave
->prev
->next
= slave
->next
;
1258 if (bond
->first_slave
== slave
) { /* slave is the first slave */
1259 if (bond
->slave_cnt
> 1) { /* there are more slave */
1260 bond
->first_slave
= slave
->next
;
1262 bond
->first_slave
= NULL
; /* slave was the last one */
1271 #ifdef CONFIG_NET_POLL_CONTROLLER
1273 * You must hold read lock on bond->lock before calling this.
1275 static bool slaves_support_netpoll(struct net_device
*bond_dev
)
1277 struct bonding
*bond
= netdev_priv(bond_dev
);
1278 struct slave
*slave
;
1282 bond_for_each_slave(bond
, slave
, i
) {
1283 if ((slave
->dev
->priv_flags
& IFF_DISABLE_NETPOLL
) ||
1284 !slave
->dev
->netdev_ops
->ndo_poll_controller
)
1287 return i
!= 0 && ret
;
1290 static void bond_poll_controller(struct net_device
*bond_dev
)
1292 struct net_device
*dev
= bond_dev
->npinfo
->netpoll
->real_dev
;
1293 if (dev
!= bond_dev
)
1294 netpoll_poll_dev(dev
);
1297 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1299 struct bonding
*bond
= netdev_priv(bond_dev
);
1300 struct slave
*slave
;
1301 const struct net_device_ops
*ops
;
1304 read_lock(&bond
->lock
);
1305 bond_dev
->npinfo
= NULL
;
1306 bond_for_each_slave(bond
, slave
, i
) {
1308 ops
= slave
->dev
->netdev_ops
;
1309 if (ops
->ndo_netpoll_cleanup
)
1310 ops
->ndo_netpoll_cleanup(slave
->dev
);
1312 slave
->dev
->npinfo
= NULL
;
1315 read_unlock(&bond
->lock
);
1320 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1326 /*---------------------------------- IOCTL ----------------------------------*/
1328 static int bond_sethwaddr(struct net_device
*bond_dev
,
1329 struct net_device
*slave_dev
)
1331 pr_debug("bond_dev=%p\n", bond_dev
);
1332 pr_debug("slave_dev=%p\n", slave_dev
);
1333 pr_debug("slave_dev->addr_len=%d\n", slave_dev
->addr_len
);
1334 memcpy(bond_dev
->dev_addr
, slave_dev
->dev_addr
, slave_dev
->addr_len
);
1338 #define BOND_VLAN_FEATURES \
1339 (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
1340 NETIF_F_HW_VLAN_FILTER)
1343 * Compute the common dev->feature set available to all slaves. Some
1344 * feature bits are managed elsewhere, so preserve those feature bits
1345 * on the master device.
1347 static int bond_compute_features(struct bonding
*bond
)
1349 struct slave
*slave
;
1350 struct net_device
*bond_dev
= bond
->dev
;
1351 unsigned long features
= bond_dev
->features
;
1352 unsigned long vlan_features
= 0;
1353 unsigned short max_hard_header_len
= max((u16
)ETH_HLEN
,
1354 bond_dev
->hard_header_len
);
1357 features
&= ~(NETIF_F_ALL_CSUM
| BOND_VLAN_FEATURES
);
1358 features
|= NETIF_F_GSO_MASK
| NETIF_F_NO_CSUM
;
1360 if (!bond
->first_slave
)
1363 features
&= ~NETIF_F_ONE_FOR_ALL
;
1365 vlan_features
= bond
->first_slave
->dev
->vlan_features
;
1366 bond_for_each_slave(bond
, slave
, i
) {
1367 features
= netdev_increment_features(features
,
1368 slave
->dev
->features
,
1369 NETIF_F_ONE_FOR_ALL
);
1370 vlan_features
= netdev_increment_features(vlan_features
,
1371 slave
->dev
->vlan_features
,
1372 NETIF_F_ONE_FOR_ALL
);
1373 if (slave
->dev
->hard_header_len
> max_hard_header_len
)
1374 max_hard_header_len
= slave
->dev
->hard_header_len
;
1378 features
|= (bond_dev
->features
& BOND_VLAN_FEATURES
);
1379 bond_dev
->features
= netdev_fix_features(features
, NULL
);
1380 bond_dev
->vlan_features
= netdev_fix_features(vlan_features
, NULL
);
1381 bond_dev
->hard_header_len
= max_hard_header_len
;
1386 static void bond_setup_by_slave(struct net_device
*bond_dev
,
1387 struct net_device
*slave_dev
)
1389 struct bonding
*bond
= netdev_priv(bond_dev
);
1391 bond_dev
->header_ops
= slave_dev
->header_ops
;
1393 bond_dev
->type
= slave_dev
->type
;
1394 bond_dev
->hard_header_len
= slave_dev
->hard_header_len
;
1395 bond_dev
->addr_len
= slave_dev
->addr_len
;
1397 memcpy(bond_dev
->broadcast
, slave_dev
->broadcast
,
1398 slave_dev
->addr_len
);
1399 bond
->setup_by_slave
= 1;
1402 /* enslave device <slave> to bond device <master> */
1403 int bond_enslave(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
1405 struct bonding
*bond
= netdev_priv(bond_dev
);
1406 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
1407 struct slave
*new_slave
= NULL
;
1408 struct netdev_hw_addr
*ha
;
1409 struct sockaddr addr
;
1411 int old_features
= bond_dev
->features
;
1414 if (!bond
->params
.use_carrier
&& slave_dev
->ethtool_ops
== NULL
&&
1415 slave_ops
->ndo_do_ioctl
== NULL
) {
1416 pr_warning("%s: Warning: no link monitoring support for %s\n",
1417 bond_dev
->name
, slave_dev
->name
);
1420 /* bond must be initialized by bond_open() before enslaving */
1421 if (!(bond_dev
->flags
& IFF_UP
)) {
1422 pr_warning("%s: master_dev is not up in bond_enslave\n",
1426 /* already enslaved */
1427 if (slave_dev
->flags
& IFF_SLAVE
) {
1428 pr_debug("Error, Device was already enslaved\n");
1432 /* vlan challenged mutual exclusion */
1433 /* no need to lock since we're protected by rtnl_lock */
1434 if (slave_dev
->features
& NETIF_F_VLAN_CHALLENGED
) {
1435 pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev
->name
);
1436 if (!list_empty(&bond
->vlan_list
)) {
1437 pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
1438 bond_dev
->name
, slave_dev
->name
, bond_dev
->name
);
1441 pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
1442 bond_dev
->name
, slave_dev
->name
,
1443 slave_dev
->name
, bond_dev
->name
);
1444 bond_dev
->features
|= NETIF_F_VLAN_CHALLENGED
;
1447 pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev
->name
);
1448 if (bond
->slave_cnt
== 0) {
1449 /* First slave, and it is not VLAN challenged,
1450 * so remove the block of adding VLANs over the bond.
1452 bond_dev
->features
&= ~NETIF_F_VLAN_CHALLENGED
;
1457 * Old ifenslave binaries are no longer supported. These can
1458 * be identified with moderate accuracy by the state of the slave:
1459 * the current ifenslave will set the interface down prior to
1460 * enslaving it; the old ifenslave will not.
1462 if ((slave_dev
->flags
& IFF_UP
)) {
1463 pr_err("%s is up. This may be due to an out of date ifenslave.\n",
1466 goto err_undo_flags
;
1469 /* set bonding device ether type by slave - bonding netdevices are
1470 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1471 * there is a need to override some of the type dependent attribs/funcs.
1473 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1474 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1476 if (bond
->slave_cnt
== 0) {
1477 if (bond_dev
->type
!= slave_dev
->type
) {
1478 pr_debug("%s: change device type from %d to %d\n",
1480 bond_dev
->type
, slave_dev
->type
);
1482 res
= netdev_bonding_change(bond_dev
,
1483 NETDEV_PRE_TYPE_CHANGE
);
1484 res
= notifier_to_errno(res
);
1486 pr_err("%s: refused to change device type\n",
1489 goto err_undo_flags
;
1492 /* Flush unicast and multicast addresses */
1493 dev_uc_flush(bond_dev
);
1494 dev_mc_flush(bond_dev
);
1496 if (slave_dev
->type
!= ARPHRD_ETHER
)
1497 bond_setup_by_slave(bond_dev
, slave_dev
);
1499 ether_setup(bond_dev
);
1501 netdev_bonding_change(bond_dev
,
1502 NETDEV_POST_TYPE_CHANGE
);
1504 } else if (bond_dev
->type
!= slave_dev
->type
) {
1505 pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
1507 slave_dev
->type
, bond_dev
->type
);
1509 goto err_undo_flags
;
1512 if (slave_ops
->ndo_set_mac_address
== NULL
) {
1513 if (bond
->slave_cnt
== 0) {
1514 pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
1516 bond
->params
.fail_over_mac
= BOND_FOM_ACTIVE
;
1517 } else if (bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
) {
1518 pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
1521 goto err_undo_flags
;
1525 new_slave
= kzalloc(sizeof(struct slave
), GFP_KERNEL
);
1528 goto err_undo_flags
;
1531 /* save slave's original flags before calling
1532 * netdev_set_master and dev_open
1534 new_slave
->original_flags
= slave_dev
->flags
;
1537 * Save slave's original ("permanent") mac address for modes
1538 * that need it, and for restoring it upon release, and then
1539 * set it to the master's address
1541 memcpy(new_slave
->perm_hwaddr
, slave_dev
->dev_addr
, ETH_ALEN
);
1543 if (!bond
->params
.fail_over_mac
) {
1545 * Set slave to master's mac address. The application already
1546 * set the master's mac address to that of the first slave
1548 memcpy(addr
.sa_data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
1549 addr
.sa_family
= slave_dev
->type
;
1550 res
= dev_set_mac_address(slave_dev
, &addr
);
1552 pr_debug("Error %d calling set_mac_address\n", res
);
1557 res
= netdev_set_master(slave_dev
, bond_dev
);
1559 pr_debug("Error %d calling netdev_set_master\n", res
);
1560 goto err_restore_mac
;
1562 /* open the slave since the application closed it */
1563 res
= dev_open(slave_dev
);
1565 pr_debug("Opening slave %s failed\n", slave_dev
->name
);
1566 goto err_unset_master
;
1569 new_slave
->dev
= slave_dev
;
1570 slave_dev
->priv_flags
|= IFF_BONDING
;
1572 if (bond_is_lb(bond
)) {
1573 /* bond_alb_init_slave() must be called before all other stages since
1574 * it might fail and we do not want to have to undo everything
1576 res
= bond_alb_init_slave(bond
, new_slave
);
1581 /* If the mode USES_PRIMARY, then the new slave gets the
1582 * master's promisc (and mc) settings only if it becomes the
1583 * curr_active_slave, and that is taken care of later when calling
1584 * bond_change_active()
1586 if (!USES_PRIMARY(bond
->params
.mode
)) {
1587 /* set promiscuity level to new slave */
1588 if (bond_dev
->flags
& IFF_PROMISC
) {
1589 res
= dev_set_promiscuity(slave_dev
, 1);
1594 /* set allmulti level to new slave */
1595 if (bond_dev
->flags
& IFF_ALLMULTI
) {
1596 res
= dev_set_allmulti(slave_dev
, 1);
1601 netif_addr_lock_bh(bond_dev
);
1602 /* upload master's mc_list to new slave */
1603 netdev_for_each_mc_addr(ha
, bond_dev
)
1604 dev_mc_add(slave_dev
, ha
->addr
);
1605 netif_addr_unlock_bh(bond_dev
);
1608 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
1609 /* add lacpdu mc addr to mc list */
1610 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
1612 dev_mc_add(slave_dev
, lacpdu_multicast
);
1615 bond_add_vlans_on_slave(bond
, slave_dev
);
1617 write_lock_bh(&bond
->lock
);
1619 bond_attach_slave(bond
, new_slave
);
1621 new_slave
->delay
= 0;
1622 new_slave
->link_failure_count
= 0;
1624 bond_compute_features(bond
);
1626 write_unlock_bh(&bond
->lock
);
1628 read_lock(&bond
->lock
);
1630 new_slave
->last_arp_rx
= jiffies
;
1632 if (bond
->params
.miimon
&& !bond
->params
.use_carrier
) {
1633 link_reporting
= bond_check_dev_link(bond
, slave_dev
, 1);
1635 if ((link_reporting
== -1) && !bond
->params
.arp_interval
) {
1637 * miimon is set but a bonded network driver
1638 * does not support ETHTOOL/MII and
1639 * arp_interval is not set. Note: if
1640 * use_carrier is enabled, we will never go
1641 * here (because netif_carrier is always
1642 * supported); thus, we don't need to change
1643 * the messages for netif_carrier.
1645 pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
1646 bond_dev
->name
, slave_dev
->name
);
1647 } else if (link_reporting
== -1) {
1648 /* unable get link status using mii/ethtool */
1649 pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
1650 bond_dev
->name
, slave_dev
->name
);
1654 /* check for initial state */
1655 if (!bond
->params
.miimon
||
1656 (bond_check_dev_link(bond
, slave_dev
, 0) == BMSR_LSTATUS
)) {
1657 if (bond
->params
.updelay
) {
1658 pr_debug("Initial state of slave_dev is BOND_LINK_BACK\n");
1659 new_slave
->link
= BOND_LINK_BACK
;
1660 new_slave
->delay
= bond
->params
.updelay
;
1662 pr_debug("Initial state of slave_dev is BOND_LINK_UP\n");
1663 new_slave
->link
= BOND_LINK_UP
;
1665 new_slave
->jiffies
= jiffies
;
1667 pr_debug("Initial state of slave_dev is BOND_LINK_DOWN\n");
1668 new_slave
->link
= BOND_LINK_DOWN
;
1671 if (bond_update_speed_duplex(new_slave
) &&
1672 (new_slave
->link
!= BOND_LINK_DOWN
)) {
1673 pr_warning("%s: Warning: failed to get speed and duplex from %s, assumed to be 100Mb/sec and Full.\n",
1674 bond_dev
->name
, new_slave
->dev
->name
);
1676 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
1677 pr_warning("%s: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.\n",
1682 if (USES_PRIMARY(bond
->params
.mode
) && bond
->params
.primary
[0]) {
1683 /* if there is a primary slave, remember it */
1684 if (strcmp(bond
->params
.primary
, new_slave
->dev
->name
) == 0) {
1685 bond
->primary_slave
= new_slave
;
1686 bond
->force_primary
= true;
1690 write_lock_bh(&bond
->curr_slave_lock
);
1692 switch (bond
->params
.mode
) {
1693 case BOND_MODE_ACTIVEBACKUP
:
1694 bond_set_slave_inactive_flags(new_slave
);
1695 bond_select_active_slave(bond
);
1697 case BOND_MODE_8023AD
:
1698 /* in 802.3ad mode, the internal mechanism
1699 * will activate the slaves in the selected
1702 bond_set_slave_inactive_flags(new_slave
);
1703 /* if this is the first slave */
1704 if (bond
->slave_cnt
== 1) {
1705 SLAVE_AD_INFO(new_slave
).id
= 1;
1706 /* Initialize AD with the number of times that the AD timer is called in 1 second
1707 * can be called only after the mac address of the bond is set
1709 bond_3ad_initialize(bond
, 1000/AD_TIMER_INTERVAL
,
1710 bond
->params
.lacp_fast
);
1712 SLAVE_AD_INFO(new_slave
).id
=
1713 SLAVE_AD_INFO(new_slave
->prev
).id
+ 1;
1716 bond_3ad_bind_slave(new_slave
);
1720 new_slave
->state
= BOND_STATE_ACTIVE
;
1721 bond_set_slave_inactive_flags(new_slave
);
1722 bond_select_active_slave(bond
);
1725 pr_debug("This slave is always active in trunk mode\n");
1727 /* always active in trunk mode */
1728 new_slave
->state
= BOND_STATE_ACTIVE
;
1730 /* In trunking mode there is little meaning to curr_active_slave
1731 * anyway (it holds no special properties of the bond device),
1732 * so we can change it without calling change_active_interface()
1734 if (!bond
->curr_active_slave
)
1735 bond
->curr_active_slave
= new_slave
;
1738 } /* switch(bond_mode) */
1740 write_unlock_bh(&bond
->curr_slave_lock
);
1742 bond_set_carrier(bond
);
1744 #ifdef CONFIG_NET_POLL_CONTROLLER
1746 * Netpoll and bonding is broken, make sure it is not initialized
1747 * until it is fixed.
1749 if (disable_netpoll
) {
1750 bond_dev
->priv_flags
|= IFF_DISABLE_NETPOLL
;
1752 if (slaves_support_netpoll(bond_dev
)) {
1753 bond_dev
->priv_flags
&= ~IFF_DISABLE_NETPOLL
;
1754 if (bond_dev
->npinfo
)
1755 slave_dev
->npinfo
= bond_dev
->npinfo
;
1756 } else if (!(bond_dev
->priv_flags
& IFF_DISABLE_NETPOLL
)) {
1757 bond_dev
->priv_flags
|= IFF_DISABLE_NETPOLL
;
1758 pr_info("New slave device %s does not support netpoll\n",
1760 pr_info("Disabling netpoll support for %s\n", bond_dev
->name
);
1764 read_unlock(&bond
->lock
);
1766 res
= bond_create_slave_symlinks(bond_dev
, slave_dev
);
1770 pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
1771 bond_dev
->name
, slave_dev
->name
,
1772 new_slave
->state
== BOND_STATE_ACTIVE
? "n active" : " backup",
1773 new_slave
->link
!= BOND_LINK_DOWN
? "n up" : " down");
1775 /* enslave is successful */
1778 /* Undo stages on error */
1780 dev_close(slave_dev
);
1783 netdev_set_master(slave_dev
, NULL
);
1786 if (!bond
->params
.fail_over_mac
) {
1787 /* XXX TODO - fom follow mode needs to change master's
1788 * MAC if this slave's MAC is in use by the bond, or at
1789 * least print a warning.
1791 memcpy(addr
.sa_data
, new_slave
->perm_hwaddr
, ETH_ALEN
);
1792 addr
.sa_family
= slave_dev
->type
;
1793 dev_set_mac_address(slave_dev
, &addr
);
1800 bond_dev
->features
= old_features
;
1806 * Try to release the slave device <slave> from the bond device <master>
1807 * It is legal to access curr_active_slave without a lock because all the function
1810 * The rules for slave state should be:
1811 * for Active/Backup:
1812 * Active stays on all backups go down
1813 * for Bonded connections:
1814 * The first up interface should be left on and all others downed.
1816 int bond_release(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
1818 struct bonding
*bond
= netdev_priv(bond_dev
);
1819 struct slave
*slave
, *oldcurrent
;
1820 struct sockaddr addr
;
1822 /* slave is not a slave or master is not master of this slave */
1823 if (!(slave_dev
->flags
& IFF_SLAVE
) ||
1824 (slave_dev
->master
!= bond_dev
)) {
1825 pr_err("%s: Error: cannot release %s.\n",
1826 bond_dev
->name
, slave_dev
->name
);
1830 netdev_bonding_change(bond_dev
, NETDEV_BONDING_DESLAVE
);
1831 write_lock_bh(&bond
->lock
);
1833 slave
= bond_get_slave_by_dev(bond
, slave_dev
);
1835 /* not a slave of this bond */
1836 pr_info("%s: %s not enslaved\n",
1837 bond_dev
->name
, slave_dev
->name
);
1838 write_unlock_bh(&bond
->lock
);
1842 if (!bond
->params
.fail_over_mac
) {
1843 if (!compare_ether_addr(bond_dev
->dev_addr
, slave
->perm_hwaddr
) &&
1844 bond
->slave_cnt
> 1)
1845 pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
1846 bond_dev
->name
, slave_dev
->name
,
1848 bond_dev
->name
, slave_dev
->name
);
1851 /* Inform AD package of unbinding of slave. */
1852 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
1853 /* must be called before the slave is
1854 * detached from the list
1856 bond_3ad_unbind_slave(slave
);
1859 pr_info("%s: releasing %s interface %s\n",
1861 (slave
->state
== BOND_STATE_ACTIVE
) ? "active" : "backup",
1864 oldcurrent
= bond
->curr_active_slave
;
1866 bond
->current_arp_slave
= NULL
;
1868 /* release the slave from its bond */
1869 bond_detach_slave(bond
, slave
);
1871 bond_compute_features(bond
);
1873 if (bond
->primary_slave
== slave
)
1874 bond
->primary_slave
= NULL
;
1876 if (oldcurrent
== slave
)
1877 bond_change_active_slave(bond
, NULL
);
1879 if (bond_is_lb(bond
)) {
1880 /* Must be called only after the slave has been
1881 * detached from the list and the curr_active_slave
1882 * has been cleared (if our_slave == old_current),
1883 * but before a new active slave is selected.
1885 write_unlock_bh(&bond
->lock
);
1886 bond_alb_deinit_slave(bond
, slave
);
1887 write_lock_bh(&bond
->lock
);
1890 if (oldcurrent
== slave
) {
1892 * Note that we hold RTNL over this sequence, so there
1893 * is no concern that another slave add/remove event
1896 write_unlock_bh(&bond
->lock
);
1897 read_lock(&bond
->lock
);
1898 write_lock_bh(&bond
->curr_slave_lock
);
1900 bond_select_active_slave(bond
);
1902 write_unlock_bh(&bond
->curr_slave_lock
);
1903 read_unlock(&bond
->lock
);
1904 write_lock_bh(&bond
->lock
);
1907 if (bond
->slave_cnt
== 0) {
1908 bond_set_carrier(bond
);
1910 /* if the last slave was removed, zero the mac address
1911 * of the master so it will be set by the application
1912 * to the mac address of the first slave
1914 memset(bond_dev
->dev_addr
, 0, bond_dev
->addr_len
);
1916 if (list_empty(&bond
->vlan_list
)) {
1917 bond_dev
->features
|= NETIF_F_VLAN_CHALLENGED
;
1919 pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
1920 bond_dev
->name
, bond_dev
->name
);
1921 pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
1924 } else if ((bond_dev
->features
& NETIF_F_VLAN_CHALLENGED
) &&
1925 !bond_has_challenged_slaves(bond
)) {
1926 pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
1927 bond_dev
->name
, slave_dev
->name
, bond_dev
->name
);
1928 bond_dev
->features
&= ~NETIF_F_VLAN_CHALLENGED
;
1931 write_unlock_bh(&bond
->lock
);
1933 /* must do this from outside any spinlocks */
1934 bond_destroy_slave_symlinks(bond_dev
, slave_dev
);
1936 bond_del_vlans_from_slave(bond
, slave_dev
);
1938 /* If the mode USES_PRIMARY, then we should only remove its
1939 * promisc and mc settings if it was the curr_active_slave, but that was
1940 * already taken care of above when we detached the slave
1942 if (!USES_PRIMARY(bond
->params
.mode
)) {
1943 /* unset promiscuity level from slave */
1944 if (bond_dev
->flags
& IFF_PROMISC
)
1945 dev_set_promiscuity(slave_dev
, -1);
1947 /* unset allmulti level from slave */
1948 if (bond_dev
->flags
& IFF_ALLMULTI
)
1949 dev_set_allmulti(slave_dev
, -1);
1951 /* flush master's mc_list from slave */
1952 netif_addr_lock_bh(bond_dev
);
1953 bond_mc_list_flush(bond_dev
, slave_dev
);
1954 netif_addr_unlock_bh(bond_dev
);
1957 netdev_set_master(slave_dev
, NULL
);
1959 #ifdef CONFIG_NET_POLL_CONTROLLER
1960 read_lock_bh(&bond
->lock
);
1962 /* Make sure netpoll over stays disabled until fixed. */
1963 if (!disable_netpoll
)
1964 if (slaves_support_netpoll(bond_dev
))
1965 bond_dev
->priv_flags
&= ~IFF_DISABLE_NETPOLL
;
1966 read_unlock_bh(&bond
->lock
);
1967 if (slave_dev
->netdev_ops
->ndo_netpoll_cleanup
)
1968 slave_dev
->netdev_ops
->ndo_netpoll_cleanup(slave_dev
);
1970 slave_dev
->npinfo
= NULL
;
1973 /* close slave before restoring its mac address */
1974 dev_close(slave_dev
);
1976 if (bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
) {
1977 /* restore original ("permanent") mac address */
1978 memcpy(addr
.sa_data
, slave
->perm_hwaddr
, ETH_ALEN
);
1979 addr
.sa_family
= slave_dev
->type
;
1980 dev_set_mac_address(slave_dev
, &addr
);
1983 slave_dev
->priv_flags
&= ~(IFF_MASTER_8023AD
| IFF_MASTER_ALB
|
1984 IFF_SLAVE_INACTIVE
| IFF_BONDING
|
1989 return 0; /* deletion OK */
1993 * First release a slave and than destroy the bond if no more slaves are left.
1994 * Must be under rtnl_lock when this function is called.
1996 int bond_release_and_destroy(struct net_device
*bond_dev
,
1997 struct net_device
*slave_dev
)
1999 struct bonding
*bond
= netdev_priv(bond_dev
);
2002 ret
= bond_release(bond_dev
, slave_dev
);
2003 if ((ret
== 0) && (bond
->slave_cnt
== 0)) {
2004 pr_info("%s: destroying bond %s.\n",
2005 bond_dev
->name
, bond_dev
->name
);
2006 unregister_netdevice(bond_dev
);
2012 * This function releases all slaves.
2014 static int bond_release_all(struct net_device
*bond_dev
)
2016 struct bonding
*bond
= netdev_priv(bond_dev
);
2017 struct slave
*slave
;
2018 struct net_device
*slave_dev
;
2019 struct sockaddr addr
;
2021 write_lock_bh(&bond
->lock
);
2023 netif_carrier_off(bond_dev
);
2025 if (bond
->slave_cnt
== 0)
2028 bond
->current_arp_slave
= NULL
;
2029 bond
->primary_slave
= NULL
;
2030 bond_change_active_slave(bond
, NULL
);
2032 while ((slave
= bond
->first_slave
) != NULL
) {
2033 /* Inform AD package of unbinding of slave
2034 * before slave is detached from the list.
2036 if (bond
->params
.mode
== BOND_MODE_8023AD
)
2037 bond_3ad_unbind_slave(slave
);
2039 slave_dev
= slave
->dev
;
2040 bond_detach_slave(bond
, slave
);
2042 /* now that the slave is detached, unlock and perform
2043 * all the undo steps that should not be called from
2046 write_unlock_bh(&bond
->lock
);
2048 if (bond_is_lb(bond
)) {
2049 /* must be called only after the slave
2050 * has been detached from the list
2052 bond_alb_deinit_slave(bond
, slave
);
2055 bond_compute_features(bond
);
2057 bond_destroy_slave_symlinks(bond_dev
, slave_dev
);
2058 bond_del_vlans_from_slave(bond
, slave_dev
);
2060 /* If the mode USES_PRIMARY, then we should only remove its
2061 * promisc and mc settings if it was the curr_active_slave, but that was
2062 * already taken care of above when we detached the slave
2064 if (!USES_PRIMARY(bond
->params
.mode
)) {
2065 /* unset promiscuity level from slave */
2066 if (bond_dev
->flags
& IFF_PROMISC
)
2067 dev_set_promiscuity(slave_dev
, -1);
2069 /* unset allmulti level from slave */
2070 if (bond_dev
->flags
& IFF_ALLMULTI
)
2071 dev_set_allmulti(slave_dev
, -1);
2073 /* flush master's mc_list from slave */
2074 netif_addr_lock_bh(bond_dev
);
2075 bond_mc_list_flush(bond_dev
, slave_dev
);
2076 netif_addr_unlock_bh(bond_dev
);
2079 netdev_set_master(slave_dev
, NULL
);
2081 /* close slave before restoring its mac address */
2082 dev_close(slave_dev
);
2084 if (!bond
->params
.fail_over_mac
) {
2085 /* restore original ("permanent") mac address*/
2086 memcpy(addr
.sa_data
, slave
->perm_hwaddr
, ETH_ALEN
);
2087 addr
.sa_family
= slave_dev
->type
;
2088 dev_set_mac_address(slave_dev
, &addr
);
2091 slave_dev
->priv_flags
&= ~(IFF_MASTER_8023AD
| IFF_MASTER_ALB
|
2092 IFF_SLAVE_INACTIVE
);
2096 /* re-acquire the lock before getting the next slave */
2097 write_lock_bh(&bond
->lock
);
2100 /* zero the mac address of the master so it will be
2101 * set by the application to the mac address of the
2104 memset(bond_dev
->dev_addr
, 0, bond_dev
->addr_len
);
2106 if (list_empty(&bond
->vlan_list
))
2107 bond_dev
->features
|= NETIF_F_VLAN_CHALLENGED
;
2109 pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
2110 bond_dev
->name
, bond_dev
->name
);
2111 pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
2115 pr_info("%s: released all slaves\n", bond_dev
->name
);
2118 write_unlock_bh(&bond
->lock
);
2124 * This function changes the active slave to slave <slave_dev>.
2125 * It returns -EINVAL in the following cases.
2126 * - <slave_dev> is not found in the list.
2127 * - There is not active slave now.
2128 * - <slave_dev> is already active.
2129 * - The link state of <slave_dev> is not BOND_LINK_UP.
2130 * - <slave_dev> is not running.
2131 * In these cases, this function does nothing.
2132 * In the other cases, current_slave pointer is changed and 0 is returned.
2134 static int bond_ioctl_change_active(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
2136 struct bonding
*bond
= netdev_priv(bond_dev
);
2137 struct slave
*old_active
= NULL
;
2138 struct slave
*new_active
= NULL
;
2141 if (!USES_PRIMARY(bond
->params
.mode
))
2144 /* Verify that master_dev is indeed the master of slave_dev */
2145 if (!(slave_dev
->flags
& IFF_SLAVE
) || (slave_dev
->master
!= bond_dev
))
2148 read_lock(&bond
->lock
);
2150 read_lock(&bond
->curr_slave_lock
);
2151 old_active
= bond
->curr_active_slave
;
2152 read_unlock(&bond
->curr_slave_lock
);
2154 new_active
= bond_get_slave_by_dev(bond
, slave_dev
);
2157 * Changing to the current active: do nothing; return success.
2159 if (new_active
&& (new_active
== old_active
)) {
2160 read_unlock(&bond
->lock
);
2166 (new_active
->link
== BOND_LINK_UP
) &&
2167 IS_UP(new_active
->dev
)) {
2168 write_lock_bh(&bond
->curr_slave_lock
);
2169 bond_change_active_slave(bond
, new_active
);
2170 write_unlock_bh(&bond
->curr_slave_lock
);
2174 read_unlock(&bond
->lock
);
2179 static int bond_info_query(struct net_device
*bond_dev
, struct ifbond
*info
)
2181 struct bonding
*bond
= netdev_priv(bond_dev
);
2183 info
->bond_mode
= bond
->params
.mode
;
2184 info
->miimon
= bond
->params
.miimon
;
2186 read_lock(&bond
->lock
);
2187 info
->num_slaves
= bond
->slave_cnt
;
2188 read_unlock(&bond
->lock
);
2193 static int bond_slave_info_query(struct net_device
*bond_dev
, struct ifslave
*info
)
2195 struct bonding
*bond
= netdev_priv(bond_dev
);
2196 struct slave
*slave
;
2197 int i
, res
= -ENODEV
;
2199 read_lock(&bond
->lock
);
2201 bond_for_each_slave(bond
, slave
, i
) {
2202 if (i
== (int)info
->slave_id
) {
2204 strcpy(info
->slave_name
, slave
->dev
->name
);
2205 info
->link
= slave
->link
;
2206 info
->state
= slave
->state
;
2207 info
->link_failure_count
= slave
->link_failure_count
;
2212 read_unlock(&bond
->lock
);
2217 /*-------------------------------- Monitoring -------------------------------*/
2220 static int bond_miimon_inspect(struct bonding
*bond
)
2222 struct slave
*slave
;
2223 int i
, link_state
, commit
= 0;
2224 bool ignore_updelay
;
2226 ignore_updelay
= !bond
->curr_active_slave
? true : false;
2228 bond_for_each_slave(bond
, slave
, i
) {
2229 slave
->new_link
= BOND_LINK_NOCHANGE
;
2231 link_state
= bond_check_dev_link(bond
, slave
->dev
, 0);
2233 switch (slave
->link
) {
2238 slave
->link
= BOND_LINK_FAIL
;
2239 slave
->delay
= bond
->params
.downdelay
;
2241 pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
2243 (bond
->params
.mode
==
2244 BOND_MODE_ACTIVEBACKUP
) ?
2245 ((slave
->state
== BOND_STATE_ACTIVE
) ?
2246 "active " : "backup ") : "",
2248 bond
->params
.downdelay
* bond
->params
.miimon
);
2251 case BOND_LINK_FAIL
:
2254 * recovered before downdelay expired
2256 slave
->link
= BOND_LINK_UP
;
2257 slave
->jiffies
= jiffies
;
2258 pr_info("%s: link status up again after %d ms for interface %s.\n",
2260 (bond
->params
.downdelay
- slave
->delay
) *
2261 bond
->params
.miimon
,
2266 if (slave
->delay
<= 0) {
2267 slave
->new_link
= BOND_LINK_DOWN
;
2275 case BOND_LINK_DOWN
:
2279 slave
->link
= BOND_LINK_BACK
;
2280 slave
->delay
= bond
->params
.updelay
;
2283 pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
2284 bond
->dev
->name
, slave
->dev
->name
,
2285 ignore_updelay
? 0 :
2286 bond
->params
.updelay
*
2287 bond
->params
.miimon
);
2290 case BOND_LINK_BACK
:
2292 slave
->link
= BOND_LINK_DOWN
;
2293 pr_info("%s: link status down again after %d ms for interface %s.\n",
2295 (bond
->params
.updelay
- slave
->delay
) *
2296 bond
->params
.miimon
,
2305 if (slave
->delay
<= 0) {
2306 slave
->new_link
= BOND_LINK_UP
;
2308 ignore_updelay
= false;
2320 static void bond_miimon_commit(struct bonding
*bond
)
2322 struct slave
*slave
;
2325 bond_for_each_slave(bond
, slave
, i
) {
2326 switch (slave
->new_link
) {
2327 case BOND_LINK_NOCHANGE
:
2331 slave
->link
= BOND_LINK_UP
;
2332 slave
->jiffies
= jiffies
;
2334 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
2335 /* prevent it from being the active one */
2336 slave
->state
= BOND_STATE_BACKUP
;
2337 } else if (bond
->params
.mode
!= BOND_MODE_ACTIVEBACKUP
) {
2338 /* make it immediately active */
2339 slave
->state
= BOND_STATE_ACTIVE
;
2340 } else if (slave
!= bond
->primary_slave
) {
2341 /* prevent it from being the active one */
2342 slave
->state
= BOND_STATE_BACKUP
;
2345 pr_info("%s: link status definitely up for interface %s.\n",
2346 bond
->dev
->name
, slave
->dev
->name
);
2348 /* notify ad that the link status has changed */
2349 if (bond
->params
.mode
== BOND_MODE_8023AD
)
2350 bond_3ad_handle_link_change(slave
, BOND_LINK_UP
);
2352 if (bond_is_lb(bond
))
2353 bond_alb_handle_link_change(bond
, slave
,
2356 if (!bond
->curr_active_slave
||
2357 (slave
== bond
->primary_slave
))
2362 case BOND_LINK_DOWN
:
2363 if (slave
->link_failure_count
< UINT_MAX
)
2364 slave
->link_failure_count
++;
2366 slave
->link
= BOND_LINK_DOWN
;
2368 if (bond
->params
.mode
== BOND_MODE_ACTIVEBACKUP
||
2369 bond
->params
.mode
== BOND_MODE_8023AD
)
2370 bond_set_slave_inactive_flags(slave
);
2372 pr_info("%s: link status definitely down for interface %s, disabling it\n",
2373 bond
->dev
->name
, slave
->dev
->name
);
2375 if (bond
->params
.mode
== BOND_MODE_8023AD
)
2376 bond_3ad_handle_link_change(slave
,
2379 if (bond_is_lb(bond
))
2380 bond_alb_handle_link_change(bond
, slave
,
2383 if (slave
== bond
->curr_active_slave
)
2389 pr_err("%s: invalid new link %d on slave %s\n",
2390 bond
->dev
->name
, slave
->new_link
,
2392 slave
->new_link
= BOND_LINK_NOCHANGE
;
2399 write_lock_bh(&bond
->curr_slave_lock
);
2400 bond_select_active_slave(bond
);
2401 write_unlock_bh(&bond
->curr_slave_lock
);
2404 bond_set_carrier(bond
);
2410 * Really a wrapper that splits the mii monitor into two phases: an
2411 * inspection, then (if inspection indicates something needs to be done)
2412 * an acquisition of appropriate locks followed by a commit phase to
2413 * implement whatever link state changes are indicated.
2415 void bond_mii_monitor(struct work_struct
*work
)
2417 struct bonding
*bond
= container_of(work
, struct bonding
,
2420 read_lock(&bond
->lock
);
2421 if (bond
->kill_timers
)
2424 if (bond
->slave_cnt
== 0)
2427 if (bond
->send_grat_arp
) {
2428 read_lock(&bond
->curr_slave_lock
);
2429 bond_send_gratuitous_arp(bond
);
2430 read_unlock(&bond
->curr_slave_lock
);
2433 if (bond
->send_unsol_na
) {
2434 read_lock(&bond
->curr_slave_lock
);
2435 bond_send_unsolicited_na(bond
);
2436 read_unlock(&bond
->curr_slave_lock
);
2439 if (bond_miimon_inspect(bond
)) {
2440 read_unlock(&bond
->lock
);
2442 read_lock(&bond
->lock
);
2444 bond_miimon_commit(bond
);
2446 read_unlock(&bond
->lock
);
2447 rtnl_unlock(); /* might sleep, hold no other locks */
2448 read_lock(&bond
->lock
);
2452 if (bond
->params
.miimon
)
2453 queue_delayed_work(bond
->wq
, &bond
->mii_work
,
2454 msecs_to_jiffies(bond
->params
.miimon
));
2456 read_unlock(&bond
->lock
);
2459 static __be32
bond_glean_dev_ip(struct net_device
*dev
)
2461 struct in_device
*idev
;
2462 struct in_ifaddr
*ifa
;
2469 idev
= __in_dev_get_rcu(dev
);
2473 ifa
= idev
->ifa_list
;
2477 addr
= ifa
->ifa_local
;
2483 static int bond_has_this_ip(struct bonding
*bond
, __be32 ip
)
2485 struct vlan_entry
*vlan
;
2487 if (ip
== bond
->master_ip
)
2490 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
) {
2491 if (ip
== vlan
->vlan_ip
)
2499 * We go to the (large) trouble of VLAN tagging ARP frames because
2500 * switches in VLAN mode (especially if ports are configured as
2501 * "native" to a VLAN) might not pass non-tagged frames.
2503 static void bond_arp_send(struct net_device
*slave_dev
, int arp_op
, __be32 dest_ip
, __be32 src_ip
, unsigned short vlan_id
)
2505 struct sk_buff
*skb
;
2507 pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op
,
2508 slave_dev
->name
, dest_ip
, src_ip
, vlan_id
);
2510 skb
= arp_create(arp_op
, ETH_P_ARP
, dest_ip
, slave_dev
, src_ip
,
2511 NULL
, slave_dev
->dev_addr
, NULL
);
2514 pr_err("ARP packet allocation failed\n");
2518 skb
= vlan_put_tag(skb
, vlan_id
);
2520 pr_err("failed to insert VLAN tag\n");
2528 static void bond_arp_send_all(struct bonding
*bond
, struct slave
*slave
)
2531 __be32
*targets
= bond
->params
.arp_targets
;
2532 struct vlan_entry
*vlan
;
2533 struct net_device
*vlan_dev
;
2537 for (i
= 0; (i
< BOND_MAX_ARP_TARGETS
); i
++) {
2540 pr_debug("basa: target %x\n", targets
[i
]);
2541 if (list_empty(&bond
->vlan_list
)) {
2542 pr_debug("basa: empty vlan: arp_send\n");
2543 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2544 bond
->master_ip
, 0);
2549 * If VLANs are configured, we do a route lookup to
2550 * determine which VLAN interface would be used, so we
2551 * can tag the ARP with the proper VLAN tag.
2553 memset(&fl
, 0, sizeof(fl
));
2554 fl
.fl4_dst
= targets
[i
];
2555 fl
.fl4_tos
= RTO_ONLINK
;
2557 rv
= ip_route_output_key(dev_net(bond
->dev
), &rt
, &fl
);
2559 if (net_ratelimit()) {
2560 pr_warning("%s: no route to arp_ip_target %pI4\n",
2561 bond
->dev
->name
, &fl
.fl4_dst
);
2567 * This target is not on a VLAN
2569 if (rt
->u
.dst
.dev
== bond
->dev
) {
2571 pr_debug("basa: rtdev == bond->dev: arp_send\n");
2572 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2573 bond
->master_ip
, 0);
2578 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
) {
2579 vlan_dev
= vlan_group_get_device(bond
->vlgrp
, vlan
->vlan_id
);
2580 if (vlan_dev
== rt
->u
.dst
.dev
) {
2581 vlan_id
= vlan
->vlan_id
;
2582 pr_debug("basa: vlan match on %s %d\n",
2583 vlan_dev
->name
, vlan_id
);
2590 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2591 vlan
->vlan_ip
, vlan_id
);
2595 if (net_ratelimit()) {
2596 pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
2597 bond
->dev
->name
, &fl
.fl4_dst
,
2598 rt
->u
.dst
.dev
? rt
->u
.dst
.dev
->name
: "NULL");
2605 * Kick out a gratuitous ARP for an IP on the bonding master plus one
2606 * for each VLAN above us.
2608 * Caller must hold curr_slave_lock for read or better
2610 static void bond_send_gratuitous_arp(struct bonding
*bond
)
2612 struct slave
*slave
= bond
->curr_active_slave
;
2613 struct vlan_entry
*vlan
;
2614 struct net_device
*vlan_dev
;
2616 pr_debug("bond_send_grat_arp: bond %s slave %s\n",
2617 bond
->dev
->name
, slave
? slave
->dev
->name
: "NULL");
2619 if (!slave
|| !bond
->send_grat_arp
||
2620 test_bit(__LINK_STATE_LINKWATCH_PENDING
, &slave
->dev
->state
))
2623 bond
->send_grat_arp
--;
2625 if (bond
->master_ip
) {
2626 bond_arp_send(slave
->dev
, ARPOP_REPLY
, bond
->master_ip
,
2627 bond
->master_ip
, 0);
2630 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
) {
2631 vlan_dev
= vlan_group_get_device(bond
->vlgrp
, vlan
->vlan_id
);
2632 if (vlan
->vlan_ip
) {
2633 bond_arp_send(slave
->dev
, ARPOP_REPLY
, vlan
->vlan_ip
,
2634 vlan
->vlan_ip
, vlan
->vlan_id
);
2639 static void bond_validate_arp(struct bonding
*bond
, struct slave
*slave
, __be32 sip
, __be32 tip
)
2642 __be32
*targets
= bond
->params
.arp_targets
;
2644 for (i
= 0; (i
< BOND_MAX_ARP_TARGETS
) && targets
[i
]; i
++) {
2645 pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
2646 &sip
, &tip
, i
, &targets
[i
],
2647 bond_has_this_ip(bond
, tip
));
2648 if (sip
== targets
[i
]) {
2649 if (bond_has_this_ip(bond
, tip
))
2650 slave
->last_arp_rx
= jiffies
;
2656 static int bond_arp_rcv(struct sk_buff
*skb
, struct net_device
*dev
, struct packet_type
*pt
, struct net_device
*orig_dev
)
2659 struct slave
*slave
;
2660 struct bonding
*bond
;
2661 unsigned char *arp_ptr
;
2664 if (dev
->priv_flags
& IFF_802_1Q_VLAN
) {
2666 * When using VLANS and bonding, dev and oriv_dev may be
2667 * incorrect if the physical interface supports VLAN
2668 * acceleration. With this change ARP validation now
2669 * works for hosts only reachable on the VLAN interface.
2671 dev
= vlan_dev_real_dev(dev
);
2672 orig_dev
= dev_get_by_index_rcu(dev_net(skb
->dev
),skb
->skb_iif
);
2675 if (!(dev
->priv_flags
& IFF_BONDING
) || !(dev
->flags
& IFF_MASTER
))
2678 bond
= netdev_priv(dev
);
2679 read_lock(&bond
->lock
);
2681 pr_debug("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n",
2682 bond
->dev
->name
, skb
->dev
? skb
->dev
->name
: "NULL",
2683 orig_dev
? orig_dev
->name
: "NULL");
2685 slave
= bond_get_slave_by_dev(bond
, orig_dev
);
2686 if (!slave
|| !slave_do_arp_validate(bond
, slave
))
2689 if (!pskb_may_pull(skb
, arp_hdr_len(dev
)))
2693 if (arp
->ar_hln
!= dev
->addr_len
||
2694 skb
->pkt_type
== PACKET_OTHERHOST
||
2695 skb
->pkt_type
== PACKET_LOOPBACK
||
2696 arp
->ar_hrd
!= htons(ARPHRD_ETHER
) ||
2697 arp
->ar_pro
!= htons(ETH_P_IP
) ||
2701 arp_ptr
= (unsigned char *)(arp
+ 1);
2702 arp_ptr
+= dev
->addr_len
;
2703 memcpy(&sip
, arp_ptr
, 4);
2704 arp_ptr
+= 4 + dev
->addr_len
;
2705 memcpy(&tip
, arp_ptr
, 4);
2707 pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2708 bond
->dev
->name
, slave
->dev
->name
, slave
->state
,
2709 bond
->params
.arp_validate
, slave_do_arp_validate(bond
, slave
),
2713 * Backup slaves won't see the ARP reply, but do come through
2714 * here for each ARP probe (so we swap the sip/tip to validate
2715 * the probe). In a "redundant switch, common router" type of
2716 * configuration, the ARP probe will (hopefully) travel from
2717 * the active, through one switch, the router, then the other
2718 * switch before reaching the backup.
2720 if (slave
->state
== BOND_STATE_ACTIVE
)
2721 bond_validate_arp(bond
, slave
, sip
, tip
);
2723 bond_validate_arp(bond
, slave
, tip
, sip
);
2726 read_unlock(&bond
->lock
);
2729 return NET_RX_SUCCESS
;
2733 * this function is called regularly to monitor each slave's link
2734 * ensuring that traffic is being sent and received when arp monitoring
2735 * is used in load-balancing mode. if the adapter has been dormant, then an
2736 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2737 * arp monitoring in active backup mode.
2739 void bond_loadbalance_arp_mon(struct work_struct
*work
)
2741 struct bonding
*bond
= container_of(work
, struct bonding
,
2743 struct slave
*slave
, *oldcurrent
;
2744 int do_failover
= 0;
2748 read_lock(&bond
->lock
);
2750 delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
2752 if (bond
->kill_timers
)
2755 if (bond
->slave_cnt
== 0)
2758 read_lock(&bond
->curr_slave_lock
);
2759 oldcurrent
= bond
->curr_active_slave
;
2760 read_unlock(&bond
->curr_slave_lock
);
2762 /* see if any of the previous devices are up now (i.e. they have
2763 * xmt and rcv traffic). the curr_active_slave does not come into
2764 * the picture unless it is null. also, slave->jiffies is not needed
2765 * here because we send an arp on each slave and give a slave as
2766 * long as it needs to get the tx/rx within the delta.
2767 * TODO: what about up/down delay in arp mode? it wasn't here before
2770 bond_for_each_slave(bond
, slave
, i
) {
2771 if (slave
->link
!= BOND_LINK_UP
) {
2772 if (time_before_eq(jiffies
, dev_trans_start(slave
->dev
) + delta_in_ticks
) &&
2773 time_before_eq(jiffies
, slave
->dev
->last_rx
+ delta_in_ticks
)) {
2775 slave
->link
= BOND_LINK_UP
;
2776 slave
->state
= BOND_STATE_ACTIVE
;
2778 /* primary_slave has no meaning in round-robin
2779 * mode. the window of a slave being up and
2780 * curr_active_slave being null after enslaving
2784 pr_info("%s: link status definitely up for interface %s, ",
2789 pr_info("%s: interface %s is now up\n",
2795 /* slave->link == BOND_LINK_UP */
2797 /* not all switches will respond to an arp request
2798 * when the source ip is 0, so don't take the link down
2799 * if we don't know our ip yet
2801 if (time_after_eq(jiffies
, dev_trans_start(slave
->dev
) + 2*delta_in_ticks
) ||
2802 (time_after_eq(jiffies
, slave
->dev
->last_rx
+ 2*delta_in_ticks
))) {
2804 slave
->link
= BOND_LINK_DOWN
;
2805 slave
->state
= BOND_STATE_BACKUP
;
2807 if (slave
->link_failure_count
< UINT_MAX
)
2808 slave
->link_failure_count
++;
2810 pr_info("%s: interface %s is now down.\n",
2814 if (slave
== oldcurrent
)
2819 /* note: if switch is in round-robin mode, all links
2820 * must tx arp to ensure all links rx an arp - otherwise
2821 * links may oscillate or not come up at all; if switch is
2822 * in something like xor mode, there is nothing we can
2823 * do - all replies will be rx'ed on same link causing slaves
2824 * to be unstable during low/no traffic periods
2826 if (IS_UP(slave
->dev
))
2827 bond_arp_send_all(bond
, slave
);
2831 write_lock_bh(&bond
->curr_slave_lock
);
2833 bond_select_active_slave(bond
);
2835 write_unlock_bh(&bond
->curr_slave_lock
);
2839 if (bond
->params
.arp_interval
)
2840 queue_delayed_work(bond
->wq
, &bond
->arp_work
, delta_in_ticks
);
2842 read_unlock(&bond
->lock
);
2846 * Called to inspect slaves for active-backup mode ARP monitor link state
2847 * changes. Sets new_link in slaves to specify what action should take
2848 * place for the slave. Returns 0 if no changes are found, >0 if changes
2849 * to link states must be committed.
2851 * Called with bond->lock held for read.
2853 static int bond_ab_arp_inspect(struct bonding
*bond
, int delta_in_ticks
)
2855 struct slave
*slave
;
2858 bond_for_each_slave(bond
, slave
, i
) {
2859 slave
->new_link
= BOND_LINK_NOCHANGE
;
2861 if (slave
->link
!= BOND_LINK_UP
) {
2862 if (time_before_eq(jiffies
, slave_last_rx(bond
, slave
) +
2864 slave
->new_link
= BOND_LINK_UP
;
2872 * Give slaves 2*delta after being enslaved or made
2873 * active. This avoids bouncing, as the last receive
2874 * times need a full ARP monitor cycle to be updated.
2876 if (!time_after_eq(jiffies
, slave
->jiffies
+
2877 2 * delta_in_ticks
))
2881 * Backup slave is down if:
2882 * - No current_arp_slave AND
2883 * - more than 3*delta since last receive AND
2884 * - the bond has an IP address
2886 * Note: a non-null current_arp_slave indicates
2887 * the curr_active_slave went down and we are
2888 * searching for a new one; under this condition
2889 * we only take the curr_active_slave down - this
2890 * gives each slave a chance to tx/rx traffic
2891 * before being taken out
2893 if (slave
->state
== BOND_STATE_BACKUP
&&
2894 !bond
->current_arp_slave
&&
2895 time_after(jiffies
, slave_last_rx(bond
, slave
) +
2896 3 * delta_in_ticks
)) {
2897 slave
->new_link
= BOND_LINK_DOWN
;
2902 * Active slave is down if:
2903 * - more than 2*delta since transmitting OR
2904 * - (more than 2*delta since receive AND
2905 * the bond has an IP address)
2907 if ((slave
->state
== BOND_STATE_ACTIVE
) &&
2908 (time_after_eq(jiffies
, dev_trans_start(slave
->dev
) +
2909 2 * delta_in_ticks
) ||
2910 (time_after_eq(jiffies
, slave_last_rx(bond
, slave
)
2911 + 2 * delta_in_ticks
)))) {
2912 slave
->new_link
= BOND_LINK_DOWN
;
2921 * Called to commit link state changes noted by inspection step of
2922 * active-backup mode ARP monitor.
2924 * Called with RTNL and bond->lock for read.
2926 static void bond_ab_arp_commit(struct bonding
*bond
, int delta_in_ticks
)
2928 struct slave
*slave
;
2931 bond_for_each_slave(bond
, slave
, i
) {
2932 switch (slave
->new_link
) {
2933 case BOND_LINK_NOCHANGE
:
2937 if ((!bond
->curr_active_slave
&&
2938 time_before_eq(jiffies
,
2939 dev_trans_start(slave
->dev
) +
2941 bond
->curr_active_slave
!= slave
) {
2942 slave
->link
= BOND_LINK_UP
;
2943 bond
->current_arp_slave
= NULL
;
2945 pr_info("%s: link status definitely up for interface %s.\n",
2946 bond
->dev
->name
, slave
->dev
->name
);
2948 if (!bond
->curr_active_slave
||
2949 (slave
== bond
->primary_slave
))
2956 case BOND_LINK_DOWN
:
2957 if (slave
->link_failure_count
< UINT_MAX
)
2958 slave
->link_failure_count
++;
2960 slave
->link
= BOND_LINK_DOWN
;
2961 bond_set_slave_inactive_flags(slave
);
2963 pr_info("%s: link status definitely down for interface %s, disabling it\n",
2964 bond
->dev
->name
, slave
->dev
->name
);
2966 if (slave
== bond
->curr_active_slave
) {
2967 bond
->current_arp_slave
= NULL
;
2974 pr_err("%s: impossible: new_link %d on slave %s\n",
2975 bond
->dev
->name
, slave
->new_link
,
2982 write_lock_bh(&bond
->curr_slave_lock
);
2983 bond_select_active_slave(bond
);
2984 write_unlock_bh(&bond
->curr_slave_lock
);
2987 bond_set_carrier(bond
);
2991 * Send ARP probes for active-backup mode ARP monitor.
2993 * Called with bond->lock held for read.
2995 static void bond_ab_arp_probe(struct bonding
*bond
)
2997 struct slave
*slave
;
3000 read_lock(&bond
->curr_slave_lock
);
3002 if (bond
->current_arp_slave
&& bond
->curr_active_slave
)
3003 pr_info("PROBE: c_arp %s && cas %s BAD\n",
3004 bond
->current_arp_slave
->dev
->name
,
3005 bond
->curr_active_slave
->dev
->name
);
3007 if (bond
->curr_active_slave
) {
3008 bond_arp_send_all(bond
, bond
->curr_active_slave
);
3009 read_unlock(&bond
->curr_slave_lock
);
3013 read_unlock(&bond
->curr_slave_lock
);
3015 /* if we don't have a curr_active_slave, search for the next available
3016 * backup slave from the current_arp_slave and make it the candidate
3017 * for becoming the curr_active_slave
3020 if (!bond
->current_arp_slave
) {
3021 bond
->current_arp_slave
= bond
->first_slave
;
3022 if (!bond
->current_arp_slave
)
3026 bond_set_slave_inactive_flags(bond
->current_arp_slave
);
3028 /* search for next candidate */
3029 bond_for_each_slave_from(bond
, slave
, i
, bond
->current_arp_slave
->next
) {
3030 if (IS_UP(slave
->dev
)) {
3031 slave
->link
= BOND_LINK_BACK
;
3032 bond_set_slave_active_flags(slave
);
3033 bond_arp_send_all(bond
, slave
);
3034 slave
->jiffies
= jiffies
;
3035 bond
->current_arp_slave
= slave
;
3039 /* if the link state is up at this point, we
3040 * mark it down - this can happen if we have
3041 * simultaneous link failures and
3042 * reselect_active_interface doesn't make this
3043 * one the current slave so it is still marked
3044 * up when it is actually down
3046 if (slave
->link
== BOND_LINK_UP
) {
3047 slave
->link
= BOND_LINK_DOWN
;
3048 if (slave
->link_failure_count
< UINT_MAX
)
3049 slave
->link_failure_count
++;
3051 bond_set_slave_inactive_flags(slave
);
3053 pr_info("%s: backup interface %s is now down.\n",
3054 bond
->dev
->name
, slave
->dev
->name
);
3059 void bond_activebackup_arp_mon(struct work_struct
*work
)
3061 struct bonding
*bond
= container_of(work
, struct bonding
,
3065 read_lock(&bond
->lock
);
3067 if (bond
->kill_timers
)
3070 delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
3072 if (bond
->slave_cnt
== 0)
3075 if (bond
->send_grat_arp
) {
3076 read_lock(&bond
->curr_slave_lock
);
3077 bond_send_gratuitous_arp(bond
);
3078 read_unlock(&bond
->curr_slave_lock
);
3081 if (bond
->send_unsol_na
) {
3082 read_lock(&bond
->curr_slave_lock
);
3083 bond_send_unsolicited_na(bond
);
3084 read_unlock(&bond
->curr_slave_lock
);
3087 if (bond_ab_arp_inspect(bond
, delta_in_ticks
)) {
3088 read_unlock(&bond
->lock
);
3090 read_lock(&bond
->lock
);
3092 bond_ab_arp_commit(bond
, delta_in_ticks
);
3094 read_unlock(&bond
->lock
);
3096 read_lock(&bond
->lock
);
3099 bond_ab_arp_probe(bond
);
3102 if (bond
->params
.arp_interval
)
3103 queue_delayed_work(bond
->wq
, &bond
->arp_work
, delta_in_ticks
);
3105 read_unlock(&bond
->lock
);
3108 /*------------------------------ proc/seq_file-------------------------------*/
3110 #ifdef CONFIG_PROC_FS
3112 static void *bond_info_seq_start(struct seq_file
*seq
, loff_t
*pos
)
3113 __acquires(&dev_base_lock
)
3114 __acquires(&bond
->lock
)
3116 struct bonding
*bond
= seq
->private;
3118 struct slave
*slave
;
3121 /* make sure the bond won't be taken away */
3122 read_lock(&dev_base_lock
);
3123 read_lock(&bond
->lock
);
3126 return SEQ_START_TOKEN
;
3128 bond_for_each_slave(bond
, slave
, i
) {
3136 static void *bond_info_seq_next(struct seq_file
*seq
, void *v
, loff_t
*pos
)
3138 struct bonding
*bond
= seq
->private;
3139 struct slave
*slave
= v
;
3142 if (v
== SEQ_START_TOKEN
)
3143 return bond
->first_slave
;
3145 slave
= slave
->next
;
3147 return (slave
== bond
->first_slave
) ? NULL
: slave
;
3150 static void bond_info_seq_stop(struct seq_file
*seq
, void *v
)
3151 __releases(&bond
->lock
)
3152 __releases(&dev_base_lock
)
3154 struct bonding
*bond
= seq
->private;
3156 read_unlock(&bond
->lock
);
3157 read_unlock(&dev_base_lock
);
3160 static void bond_info_show_master(struct seq_file
*seq
)
3162 struct bonding
*bond
= seq
->private;
3166 read_lock(&bond
->curr_slave_lock
);
3167 curr
= bond
->curr_active_slave
;
3168 read_unlock(&bond
->curr_slave_lock
);
3170 seq_printf(seq
, "Bonding Mode: %s",
3171 bond_mode_name(bond
->params
.mode
));
3173 if (bond
->params
.mode
== BOND_MODE_ACTIVEBACKUP
&&
3174 bond
->params
.fail_over_mac
)
3175 seq_printf(seq
, " (fail_over_mac %s)",
3176 fail_over_mac_tbl
[bond
->params
.fail_over_mac
].modename
);
3178 seq_printf(seq
, "\n");
3180 if (bond
->params
.mode
== BOND_MODE_XOR
||
3181 bond
->params
.mode
== BOND_MODE_8023AD
) {
3182 seq_printf(seq
, "Transmit Hash Policy: %s (%d)\n",
3183 xmit_hashtype_tbl
[bond
->params
.xmit_policy
].modename
,
3184 bond
->params
.xmit_policy
);
3187 if (USES_PRIMARY(bond
->params
.mode
)) {
3188 seq_printf(seq
, "Primary Slave: %s",
3189 (bond
->primary_slave
) ?
3190 bond
->primary_slave
->dev
->name
: "None");
3191 if (bond
->primary_slave
)
3192 seq_printf(seq
, " (primary_reselect %s)",
3193 pri_reselect_tbl
[bond
->params
.primary_reselect
].modename
);
3195 seq_printf(seq
, "\nCurrently Active Slave: %s\n",
3196 (curr
) ? curr
->dev
->name
: "None");
3199 seq_printf(seq
, "MII Status: %s\n", netif_carrier_ok(bond
->dev
) ?
3201 seq_printf(seq
, "MII Polling Interval (ms): %d\n", bond
->params
.miimon
);
3202 seq_printf(seq
, "Up Delay (ms): %d\n",
3203 bond
->params
.updelay
* bond
->params
.miimon
);
3204 seq_printf(seq
, "Down Delay (ms): %d\n",
3205 bond
->params
.downdelay
* bond
->params
.miimon
);
3208 /* ARP information */
3209 if (bond
->params
.arp_interval
> 0) {
3211 seq_printf(seq
, "ARP Polling Interval (ms): %d\n",
3212 bond
->params
.arp_interval
);
3214 seq_printf(seq
, "ARP IP target/s (n.n.n.n form):");
3216 for (i
= 0; (i
< BOND_MAX_ARP_TARGETS
); i
++) {
3217 if (!bond
->params
.arp_targets
[i
])
3220 seq_printf(seq
, ",");
3221 seq_printf(seq
, " %pI4", &bond
->params
.arp_targets
[i
]);
3224 seq_printf(seq
, "\n");
3227 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
3228 struct ad_info ad_info
;
3230 seq_puts(seq
, "\n802.3ad info\n");
3231 seq_printf(seq
, "LACP rate: %s\n",
3232 (bond
->params
.lacp_fast
) ? "fast" : "slow");
3233 seq_printf(seq
, "Aggregator selection policy (ad_select): %s\n",
3234 ad_select_tbl
[bond
->params
.ad_select
].modename
);
3236 if (bond_3ad_get_active_agg_info(bond
, &ad_info
)) {
3237 seq_printf(seq
, "bond %s has no active aggregator\n",
3240 seq_printf(seq
, "Active Aggregator Info:\n");
3242 seq_printf(seq
, "\tAggregator ID: %d\n",
3243 ad_info
.aggregator_id
);
3244 seq_printf(seq
, "\tNumber of ports: %d\n",
3246 seq_printf(seq
, "\tActor Key: %d\n",
3248 seq_printf(seq
, "\tPartner Key: %d\n",
3249 ad_info
.partner_key
);
3250 seq_printf(seq
, "\tPartner Mac Address: %pM\n",
3251 ad_info
.partner_system
);
3256 static void bond_info_show_slave(struct seq_file
*seq
,
3257 const struct slave
*slave
)
3259 struct bonding
*bond
= seq
->private;
3261 seq_printf(seq
, "\nSlave Interface: %s\n", slave
->dev
->name
);
3262 seq_printf(seq
, "MII Status: %s\n",
3263 (slave
->link
== BOND_LINK_UP
) ? "up" : "down");
3264 seq_printf(seq
, "Link Failure Count: %u\n",
3265 slave
->link_failure_count
);
3267 seq_printf(seq
, "Permanent HW addr: %pM\n", slave
->perm_hwaddr
);
3269 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
3270 const struct aggregator
*agg
3271 = SLAVE_AD_INFO(slave
).port
.aggregator
;
3274 seq_printf(seq
, "Aggregator ID: %d\n",
3275 agg
->aggregator_identifier
);
3277 seq_puts(seq
, "Aggregator ID: N/A\n");
3281 static int bond_info_seq_show(struct seq_file
*seq
, void *v
)
3283 if (v
== SEQ_START_TOKEN
) {
3284 seq_printf(seq
, "%s\n", version
);
3285 bond_info_show_master(seq
);
3287 bond_info_show_slave(seq
, v
);
3292 static const struct seq_operations bond_info_seq_ops
= {
3293 .start
= bond_info_seq_start
,
3294 .next
= bond_info_seq_next
,
3295 .stop
= bond_info_seq_stop
,
3296 .show
= bond_info_seq_show
,
3299 static int bond_info_open(struct inode
*inode
, struct file
*file
)
3301 struct seq_file
*seq
;
3302 struct proc_dir_entry
*proc
;
3305 res
= seq_open(file
, &bond_info_seq_ops
);
3307 /* recover the pointer buried in proc_dir_entry data */
3308 seq
= file
->private_data
;
3310 seq
->private = proc
->data
;
3316 static const struct file_operations bond_info_fops
= {
3317 .owner
= THIS_MODULE
,
3318 .open
= bond_info_open
,
3320 .llseek
= seq_lseek
,
3321 .release
= seq_release
,
3324 static void bond_create_proc_entry(struct bonding
*bond
)
3326 struct net_device
*bond_dev
= bond
->dev
;
3327 struct bond_net
*bn
= net_generic(dev_net(bond_dev
), bond_net_id
);
3330 bond
->proc_entry
= proc_create_data(bond_dev
->name
,
3331 S_IRUGO
, bn
->proc_dir
,
3332 &bond_info_fops
, bond
);
3333 if (bond
->proc_entry
== NULL
)
3334 pr_warning("Warning: Cannot create /proc/net/%s/%s\n",
3335 DRV_NAME
, bond_dev
->name
);
3337 memcpy(bond
->proc_file_name
, bond_dev
->name
, IFNAMSIZ
);
3341 static void bond_remove_proc_entry(struct bonding
*bond
)
3343 struct net_device
*bond_dev
= bond
->dev
;
3344 struct bond_net
*bn
= net_generic(dev_net(bond_dev
), bond_net_id
);
3346 if (bn
->proc_dir
&& bond
->proc_entry
) {
3347 remove_proc_entry(bond
->proc_file_name
, bn
->proc_dir
);
3348 memset(bond
->proc_file_name
, 0, IFNAMSIZ
);
3349 bond
->proc_entry
= NULL
;
3353 /* Create the bonding directory under /proc/net, if doesn't exist yet.
3354 * Caller must hold rtnl_lock.
3356 static void __net_init
bond_create_proc_dir(struct bond_net
*bn
)
3358 if (!bn
->proc_dir
) {
3359 bn
->proc_dir
= proc_mkdir(DRV_NAME
, bn
->net
->proc_net
);
3361 pr_warning("Warning: cannot create /proc/net/%s\n",
3366 /* Destroy the bonding directory under /proc/net, if empty.
3367 * Caller must hold rtnl_lock.
3369 static void __net_exit
bond_destroy_proc_dir(struct bond_net
*bn
)
3372 remove_proc_entry(DRV_NAME
, bn
->net
->proc_net
);
3373 bn
->proc_dir
= NULL
;
3377 #else /* !CONFIG_PROC_FS */
3379 static void bond_create_proc_entry(struct bonding
*bond
)
3383 static void bond_remove_proc_entry(struct bonding
*bond
)
3387 static inline void bond_create_proc_dir(struct bond_net
*bn
)
3391 static inline void bond_destroy_proc_dir(struct bond_net
*bn
)
3395 #endif /* CONFIG_PROC_FS */
3398 /*-------------------------- netdev event handling --------------------------*/
3401 * Change device name
3403 static int bond_event_changename(struct bonding
*bond
)
3405 bond_remove_proc_entry(bond
);
3406 bond_create_proc_entry(bond
);
3411 static int bond_master_netdev_event(unsigned long event
,
3412 struct net_device
*bond_dev
)
3414 struct bonding
*event_bond
= netdev_priv(bond_dev
);
3417 case NETDEV_CHANGENAME
:
3418 return bond_event_changename(event_bond
);
3426 static int bond_slave_netdev_event(unsigned long event
,
3427 struct net_device
*slave_dev
)
3429 struct net_device
*bond_dev
= slave_dev
->master
;
3430 struct bonding
*bond
= netdev_priv(bond_dev
);
3433 case NETDEV_UNREGISTER
:
3435 if (bond
->setup_by_slave
)
3436 bond_release_and_destroy(bond_dev
, slave_dev
);
3438 bond_release(bond_dev
, slave_dev
);
3442 if (bond
->params
.mode
== BOND_MODE_8023AD
|| bond_is_lb(bond
)) {
3443 struct slave
*slave
;
3445 slave
= bond_get_slave_by_dev(bond
, slave_dev
);
3447 u16 old_speed
= slave
->speed
;
3448 u16 old_duplex
= slave
->duplex
;
3450 bond_update_speed_duplex(slave
);
3452 if (bond_is_lb(bond
))
3455 if (old_speed
!= slave
->speed
)
3456 bond_3ad_adapter_speed_changed(slave
);
3457 if (old_duplex
!= slave
->duplex
)
3458 bond_3ad_adapter_duplex_changed(slave
);
3465 * ... Or is it this?
3468 case NETDEV_CHANGEMTU
:
3470 * TODO: Should slaves be allowed to
3471 * independently alter their MTU? For
3472 * an active-backup bond, slaves need
3473 * not be the same type of device, so
3474 * MTUs may vary. For other modes,
3475 * slaves arguably should have the
3476 * same MTUs. To do this, we'd need to
3477 * take over the slave's change_mtu
3478 * function for the duration of their
3482 case NETDEV_CHANGENAME
:
3484 * TODO: handle changing the primary's name
3487 case NETDEV_FEAT_CHANGE
:
3488 bond_compute_features(bond
);
3498 * bond_netdev_event: handle netdev notifier chain events.
3500 * This function receives events for the netdev chain. The caller (an
3501 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3502 * locks for us to safely manipulate the slave devices (RTNL lock,
3505 static int bond_netdev_event(struct notifier_block
*this,
3506 unsigned long event
, void *ptr
)
3508 struct net_device
*event_dev
= (struct net_device
*)ptr
;
3510 pr_debug("event_dev: %s, event: %lx\n",
3511 event_dev
? event_dev
->name
: "None",
3514 if (!(event_dev
->priv_flags
& IFF_BONDING
))
3517 if (event_dev
->flags
& IFF_MASTER
) {
3518 pr_debug("IFF_MASTER\n");
3519 return bond_master_netdev_event(event
, event_dev
);
3522 if (event_dev
->flags
& IFF_SLAVE
) {
3523 pr_debug("IFF_SLAVE\n");
3524 return bond_slave_netdev_event(event
, event_dev
);
3531 * bond_inetaddr_event: handle inetaddr notifier chain events.
3533 * We keep track of device IPs primarily to use as source addresses in
3534 * ARP monitor probes (rather than spewing out broadcasts all the time).
3536 * We track one IP for the main device (if it has one), plus one per VLAN.
3538 static int bond_inetaddr_event(struct notifier_block
*this, unsigned long event
, void *ptr
)
3540 struct in_ifaddr
*ifa
= ptr
;
3541 struct net_device
*vlan_dev
, *event_dev
= ifa
->ifa_dev
->dev
;
3542 struct bond_net
*bn
= net_generic(dev_net(event_dev
), bond_net_id
);
3543 struct bonding
*bond
;
3544 struct vlan_entry
*vlan
;
3546 list_for_each_entry(bond
, &bn
->dev_list
, bond_list
) {
3547 if (bond
->dev
== event_dev
) {
3550 bond
->master_ip
= ifa
->ifa_local
;
3553 bond
->master_ip
= bond_glean_dev_ip(bond
->dev
);
3560 list_for_each_entry(vlan
, &bond
->vlan_list
, vlan_list
) {
3561 vlan_dev
= vlan_group_get_device(bond
->vlgrp
, vlan
->vlan_id
);
3562 if (vlan_dev
== event_dev
) {
3565 vlan
->vlan_ip
= ifa
->ifa_local
;
3569 bond_glean_dev_ip(vlan_dev
);
3580 static struct notifier_block bond_netdev_notifier
= {
3581 .notifier_call
= bond_netdev_event
,
3584 static struct notifier_block bond_inetaddr_notifier
= {
3585 .notifier_call
= bond_inetaddr_event
,
3588 /*-------------------------- Packet type handling ---------------------------*/
3590 /* register to receive lacpdus on a bond */
3591 static void bond_register_lacpdu(struct bonding
*bond
)
3593 struct packet_type
*pk_type
= &(BOND_AD_INFO(bond
).ad_pkt_type
);
3595 /* initialize packet type */
3596 pk_type
->type
= PKT_TYPE_LACPDU
;
3597 pk_type
->dev
= bond
->dev
;
3598 pk_type
->func
= bond_3ad_lacpdu_recv
;
3600 dev_add_pack(pk_type
);
3603 /* unregister to receive lacpdus on a bond */
3604 static void bond_unregister_lacpdu(struct bonding
*bond
)
3606 dev_remove_pack(&(BOND_AD_INFO(bond
).ad_pkt_type
));
3609 void bond_register_arp(struct bonding
*bond
)
3611 struct packet_type
*pt
= &bond
->arp_mon_pt
;
3616 pt
->type
= htons(ETH_P_ARP
);
3617 pt
->dev
= bond
->dev
;
3618 pt
->func
= bond_arp_rcv
;
3622 void bond_unregister_arp(struct bonding
*bond
)
3624 struct packet_type
*pt
= &bond
->arp_mon_pt
;
3626 dev_remove_pack(pt
);
3630 /*---------------------------- Hashing Policies -----------------------------*/
3633 * Hash for the output device based upon layer 2 and layer 3 data. If
3634 * the packet is not IP mimic bond_xmit_hash_policy_l2()
3636 static int bond_xmit_hash_policy_l23(struct sk_buff
*skb
, int count
)
3638 struct ethhdr
*data
= (struct ethhdr
*)skb
->data
;
3639 struct iphdr
*iph
= ip_hdr(skb
);
3641 if (skb
->protocol
== htons(ETH_P_IP
)) {
3642 return ((ntohl(iph
->saddr
^ iph
->daddr
) & 0xffff) ^
3643 (data
->h_dest
[5] ^ data
->h_source
[5])) % count
;
3646 return (data
->h_dest
[5] ^ data
->h_source
[5]) % count
;
3650 * Hash for the output device based upon layer 3 and layer 4 data. If
3651 * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
3652 * altogether not IP, mimic bond_xmit_hash_policy_l2()
3654 static int bond_xmit_hash_policy_l34(struct sk_buff
*skb
, int count
)
3656 struct ethhdr
*data
= (struct ethhdr
*)skb
->data
;
3657 struct iphdr
*iph
= ip_hdr(skb
);
3658 __be16
*layer4hdr
= (__be16
*)((u32
*)iph
+ iph
->ihl
);
3661 if (skb
->protocol
== htons(ETH_P_IP
)) {
3662 if (!(iph
->frag_off
& htons(IP_MF
|IP_OFFSET
)) &&
3663 (iph
->protocol
== IPPROTO_TCP
||
3664 iph
->protocol
== IPPROTO_UDP
)) {
3665 layer4_xor
= ntohs((*layer4hdr
^ *(layer4hdr
+ 1)));
3667 return (layer4_xor
^
3668 ((ntohl(iph
->saddr
^ iph
->daddr
)) & 0xffff)) % count
;
3672 return (data
->h_dest
[5] ^ data
->h_source
[5]) % count
;
3676 * Hash for the output device based upon layer 2 data
3678 static int bond_xmit_hash_policy_l2(struct sk_buff
*skb
, int count
)
3680 struct ethhdr
*data
= (struct ethhdr
*)skb
->data
;
3682 return (data
->h_dest
[5] ^ data
->h_source
[5]) % count
;
3685 /*-------------------------- Device entry points ----------------------------*/
3687 static int bond_open(struct net_device
*bond_dev
)
3689 struct bonding
*bond
= netdev_priv(bond_dev
);
3691 bond
->kill_timers
= 0;
3693 if (bond_is_lb(bond
)) {
3694 /* bond_alb_initialize must be called before the timer
3697 if (bond_alb_initialize(bond
, (bond
->params
.mode
== BOND_MODE_ALB
))) {
3698 /* something went wrong - fail the open operation */
3702 INIT_DELAYED_WORK(&bond
->alb_work
, bond_alb_monitor
);
3703 queue_delayed_work(bond
->wq
, &bond
->alb_work
, 0);
3706 if (bond
->params
.miimon
) { /* link check interval, in milliseconds. */
3707 INIT_DELAYED_WORK(&bond
->mii_work
, bond_mii_monitor
);
3708 queue_delayed_work(bond
->wq
, &bond
->mii_work
, 0);
3711 if (bond
->params
.arp_interval
) { /* arp interval, in milliseconds. */
3712 if (bond
->params
.mode
== BOND_MODE_ACTIVEBACKUP
)
3713 INIT_DELAYED_WORK(&bond
->arp_work
,
3714 bond_activebackup_arp_mon
);
3716 INIT_DELAYED_WORK(&bond
->arp_work
,
3717 bond_loadbalance_arp_mon
);
3719 queue_delayed_work(bond
->wq
, &bond
->arp_work
, 0);
3720 if (bond
->params
.arp_validate
)
3721 bond_register_arp(bond
);
3724 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
3725 INIT_DELAYED_WORK(&bond
->ad_work
, bond_3ad_state_machine_handler
);
3726 queue_delayed_work(bond
->wq
, &bond
->ad_work
, 0);
3727 /* register to receive LACPDUs */
3728 bond_register_lacpdu(bond
);
3729 bond_3ad_initiate_agg_selection(bond
, 1);
3735 static int bond_close(struct net_device
*bond_dev
)
3737 struct bonding
*bond
= netdev_priv(bond_dev
);
3739 if (bond
->params
.mode
== BOND_MODE_8023AD
) {
3740 /* Unregister the receive of LACPDUs */
3741 bond_unregister_lacpdu(bond
);
3744 if (bond
->params
.arp_validate
)
3745 bond_unregister_arp(bond
);
3747 write_lock_bh(&bond
->lock
);
3749 bond
->send_grat_arp
= 0;
3750 bond
->send_unsol_na
= 0;
3752 /* signal timers not to re-arm */
3753 bond
->kill_timers
= 1;
3755 write_unlock_bh(&bond
->lock
);
3757 if (bond
->params
.miimon
) { /* link check interval, in milliseconds. */
3758 cancel_delayed_work(&bond
->mii_work
);
3761 if (bond
->params
.arp_interval
) { /* arp interval, in milliseconds. */
3762 cancel_delayed_work(&bond
->arp_work
);
3765 switch (bond
->params
.mode
) {
3766 case BOND_MODE_8023AD
:
3767 cancel_delayed_work(&bond
->ad_work
);
3771 cancel_delayed_work(&bond
->alb_work
);
3778 if (bond_is_lb(bond
)) {
3779 /* Must be called only after all
3780 * slaves have been released
3782 bond_alb_deinitialize(bond
);
3788 static struct net_device_stats
*bond_get_stats(struct net_device
*bond_dev
)
3790 struct bonding
*bond
= netdev_priv(bond_dev
);
3791 struct net_device_stats
*stats
= &bond_dev
->stats
;
3792 struct net_device_stats local_stats
;
3793 struct slave
*slave
;
3796 memset(&local_stats
, 0, sizeof(struct net_device_stats
));
3798 read_lock_bh(&bond
->lock
);
3800 bond_for_each_slave(bond
, slave
, i
) {
3801 const struct net_device_stats
*sstats
= dev_get_stats(slave
->dev
);
3803 local_stats
.rx_packets
+= sstats
->rx_packets
;
3804 local_stats
.rx_bytes
+= sstats
->rx_bytes
;
3805 local_stats
.rx_errors
+= sstats
->rx_errors
;
3806 local_stats
.rx_dropped
+= sstats
->rx_dropped
;
3808 local_stats
.tx_packets
+= sstats
->tx_packets
;
3809 local_stats
.tx_bytes
+= sstats
->tx_bytes
;
3810 local_stats
.tx_errors
+= sstats
->tx_errors
;
3811 local_stats
.tx_dropped
+= sstats
->tx_dropped
;
3813 local_stats
.multicast
+= sstats
->multicast
;
3814 local_stats
.collisions
+= sstats
->collisions
;
3816 local_stats
.rx_length_errors
+= sstats
->rx_length_errors
;
3817 local_stats
.rx_over_errors
+= sstats
->rx_over_errors
;
3818 local_stats
.rx_crc_errors
+= sstats
->rx_crc_errors
;
3819 local_stats
.rx_frame_errors
+= sstats
->rx_frame_errors
;
3820 local_stats
.rx_fifo_errors
+= sstats
->rx_fifo_errors
;
3821 local_stats
.rx_missed_errors
+= sstats
->rx_missed_errors
;
3823 local_stats
.tx_aborted_errors
+= sstats
->tx_aborted_errors
;
3824 local_stats
.tx_carrier_errors
+= sstats
->tx_carrier_errors
;
3825 local_stats
.tx_fifo_errors
+= sstats
->tx_fifo_errors
;
3826 local_stats
.tx_heartbeat_errors
+= sstats
->tx_heartbeat_errors
;
3827 local_stats
.tx_window_errors
+= sstats
->tx_window_errors
;
3830 memcpy(stats
, &local_stats
, sizeof(struct net_device_stats
));
3832 read_unlock_bh(&bond
->lock
);
3837 static int bond_do_ioctl(struct net_device
*bond_dev
, struct ifreq
*ifr
, int cmd
)
3839 struct net_device
*slave_dev
= NULL
;
3840 struct ifbond k_binfo
;
3841 struct ifbond __user
*u_binfo
= NULL
;
3842 struct ifslave k_sinfo
;
3843 struct ifslave __user
*u_sinfo
= NULL
;
3844 struct mii_ioctl_data
*mii
= NULL
;
3847 pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev
->name
, cmd
);
3859 * We do this again just in case we were called by SIOCGMIIREG
3860 * instead of SIOCGMIIPHY.
3867 if (mii
->reg_num
== 1) {
3868 struct bonding
*bond
= netdev_priv(bond_dev
);
3870 read_lock(&bond
->lock
);
3871 read_lock(&bond
->curr_slave_lock
);
3872 if (netif_carrier_ok(bond
->dev
))
3873 mii
->val_out
= BMSR_LSTATUS
;
3875 read_unlock(&bond
->curr_slave_lock
);
3876 read_unlock(&bond
->lock
);
3880 case BOND_INFO_QUERY_OLD
:
3881 case SIOCBONDINFOQUERY
:
3882 u_binfo
= (struct ifbond __user
*)ifr
->ifr_data
;
3884 if (copy_from_user(&k_binfo
, u_binfo
, sizeof(ifbond
)))
3887 res
= bond_info_query(bond_dev
, &k_binfo
);
3889 copy_to_user(u_binfo
, &k_binfo
, sizeof(ifbond
)))
3893 case BOND_SLAVE_INFO_QUERY_OLD
:
3894 case SIOCBONDSLAVEINFOQUERY
:
3895 u_sinfo
= (struct ifslave __user
*)ifr
->ifr_data
;
3897 if (copy_from_user(&k_sinfo
, u_sinfo
, sizeof(ifslave
)))
3900 res
= bond_slave_info_query(bond_dev
, &k_sinfo
);
3902 copy_to_user(u_sinfo
, &k_sinfo
, sizeof(ifslave
)))
3911 if (!capable(CAP_NET_ADMIN
))
3914 slave_dev
= dev_get_by_name(dev_net(bond_dev
), ifr
->ifr_slave
);
3916 pr_debug("slave_dev=%p:\n", slave_dev
);
3921 pr_debug("slave_dev->name=%s:\n", slave_dev
->name
);
3923 case BOND_ENSLAVE_OLD
:
3924 case SIOCBONDENSLAVE
:
3925 res
= bond_enslave(bond_dev
, slave_dev
);
3927 case BOND_RELEASE_OLD
:
3928 case SIOCBONDRELEASE
:
3929 res
= bond_release(bond_dev
, slave_dev
);
3931 case BOND_SETHWADDR_OLD
:
3932 case SIOCBONDSETHWADDR
:
3933 res
= bond_sethwaddr(bond_dev
, slave_dev
);
3935 case BOND_CHANGE_ACTIVE_OLD
:
3936 case SIOCBONDCHANGEACTIVE
:
3937 res
= bond_ioctl_change_active(bond_dev
, slave_dev
);
3949 static bool bond_addr_in_mc_list(unsigned char *addr
,
3950 struct netdev_hw_addr_list
*list
,
3953 struct netdev_hw_addr
*ha
;
3955 netdev_hw_addr_list_for_each(ha
, list
)
3956 if (!memcmp(ha
->addr
, addr
, addrlen
))
3962 static void bond_set_multicast_list(struct net_device
*bond_dev
)
3964 struct bonding
*bond
= netdev_priv(bond_dev
);
3965 struct netdev_hw_addr
*ha
;
3969 * Do promisc before checking multicast_mode
3971 if ((bond_dev
->flags
& IFF_PROMISC
) && !(bond
->flags
& IFF_PROMISC
))
3973 * FIXME: Need to handle the error when one of the multi-slaves
3976 bond_set_promiscuity(bond
, 1);
3979 if (!(bond_dev
->flags
& IFF_PROMISC
) && (bond
->flags
& IFF_PROMISC
))
3980 bond_set_promiscuity(bond
, -1);
3983 /* set allmulti flag to slaves */
3984 if ((bond_dev
->flags
& IFF_ALLMULTI
) && !(bond
->flags
& IFF_ALLMULTI
))
3986 * FIXME: Need to handle the error when one of the multi-slaves
3989 bond_set_allmulti(bond
, 1);
3992 if (!(bond_dev
->flags
& IFF_ALLMULTI
) && (bond
->flags
& IFF_ALLMULTI
))
3993 bond_set_allmulti(bond
, -1);
3996 read_lock(&bond
->lock
);
3998 bond
->flags
= bond_dev
->flags
;
4000 /* looking for addresses to add to slaves' mc list */
4001 netdev_for_each_mc_addr(ha
, bond_dev
) {
4002 found
= bond_addr_in_mc_list(ha
->addr
, &bond
->mc_list
,
4003 bond_dev
->addr_len
);
4005 bond_mc_add(bond
, ha
->addr
);
4008 /* looking for addresses to delete from slaves' list */
4009 netdev_hw_addr_list_for_each(ha
, &bond
->mc_list
) {
4010 found
= bond_addr_in_mc_list(ha
->addr
, &bond_dev
->mc
,
4011 bond_dev
->addr_len
);
4013 bond_mc_del(bond
, ha
->addr
);
4016 /* save master's multicast list */
4017 __hw_addr_flush(&bond
->mc_list
);
4018 __hw_addr_add_multiple(&bond
->mc_list
, &bond_dev
->mc
,
4019 bond_dev
->addr_len
, NETDEV_HW_ADDR_T_MULTICAST
);
4021 read_unlock(&bond
->lock
);
4024 static int bond_neigh_setup(struct net_device
*dev
, struct neigh_parms
*parms
)
4026 struct bonding
*bond
= netdev_priv(dev
);
4027 struct slave
*slave
= bond
->first_slave
;
4030 const struct net_device_ops
*slave_ops
4031 = slave
->dev
->netdev_ops
;
4032 if (slave_ops
->ndo_neigh_setup
)
4033 return slave_ops
->ndo_neigh_setup(slave
->dev
, parms
);
4039 * Change the MTU of all of a master's slaves to match the master
4041 static int bond_change_mtu(struct net_device
*bond_dev
, int new_mtu
)
4043 struct bonding
*bond
= netdev_priv(bond_dev
);
4044 struct slave
*slave
, *stop_at
;
4048 pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond
,
4049 (bond_dev
? bond_dev
->name
: "None"), new_mtu
);
4051 /* Can't hold bond->lock with bh disabled here since
4052 * some base drivers panic. On the other hand we can't
4053 * hold bond->lock without bh disabled because we'll
4054 * deadlock. The only solution is to rely on the fact
4055 * that we're under rtnl_lock here, and the slaves
4056 * list won't change. This doesn't solve the problem
4057 * of setting the slave's MTU while it is
4058 * transmitting, but the assumption is that the base
4059 * driver can handle that.
4061 * TODO: figure out a way to safely iterate the slaves
4062 * list, but without holding a lock around the actual
4063 * call to the base driver.
4066 bond_for_each_slave(bond
, slave
, i
) {
4067 pr_debug("s %p s->p %p c_m %p\n",
4070 slave
->dev
->netdev_ops
->ndo_change_mtu
);
4072 res
= dev_set_mtu(slave
->dev
, new_mtu
);
4075 /* If we failed to set the slave's mtu to the new value
4076 * we must abort the operation even in ACTIVE_BACKUP
4077 * mode, because if we allow the backup slaves to have
4078 * different mtu values than the active slave we'll
4079 * need to change their mtu when doing a failover. That
4080 * means changing their mtu from timer context, which
4081 * is probably not a good idea.
4083 pr_debug("err %d %s\n", res
, slave
->dev
->name
);
4088 bond_dev
->mtu
= new_mtu
;
4093 /* unwind from head to the slave that failed */
4095 bond_for_each_slave_from_to(bond
, slave
, i
, bond
->first_slave
, stop_at
) {
4098 tmp_res
= dev_set_mtu(slave
->dev
, bond_dev
->mtu
);
4100 pr_debug("unwind err %d dev %s\n",
4101 tmp_res
, slave
->dev
->name
);
4111 * Note that many devices must be down to change the HW address, and
4112 * downing the master releases all slaves. We can make bonds full of
4113 * bonding devices to test this, however.
4115 static int bond_set_mac_address(struct net_device
*bond_dev
, void *addr
)
4117 struct bonding
*bond
= netdev_priv(bond_dev
);
4118 struct sockaddr
*sa
= addr
, tmp_sa
;
4119 struct slave
*slave
, *stop_at
;
4123 if (bond
->params
.mode
== BOND_MODE_ALB
)
4124 return bond_alb_set_mac_address(bond_dev
, addr
);
4127 pr_debug("bond=%p, name=%s\n",
4128 bond
, bond_dev
? bond_dev
->name
: "None");
4131 * If fail_over_mac is set to active, do nothing and return
4132 * success. Returning an error causes ifenslave to fail.
4134 if (bond
->params
.fail_over_mac
== BOND_FOM_ACTIVE
)
4137 if (!is_valid_ether_addr(sa
->sa_data
))
4138 return -EADDRNOTAVAIL
;
4140 /* Can't hold bond->lock with bh disabled here since
4141 * some base drivers panic. On the other hand we can't
4142 * hold bond->lock without bh disabled because we'll
4143 * deadlock. The only solution is to rely on the fact
4144 * that we're under rtnl_lock here, and the slaves
4145 * list won't change. This doesn't solve the problem
4146 * of setting the slave's hw address while it is
4147 * transmitting, but the assumption is that the base
4148 * driver can handle that.
4150 * TODO: figure out a way to safely iterate the slaves
4151 * list, but without holding a lock around the actual
4152 * call to the base driver.
4155 bond_for_each_slave(bond
, slave
, i
) {
4156 const struct net_device_ops
*slave_ops
= slave
->dev
->netdev_ops
;
4157 pr_debug("slave %p %s\n", slave
, slave
->dev
->name
);
4159 if (slave_ops
->ndo_set_mac_address
== NULL
) {
4161 pr_debug("EOPNOTSUPP %s\n", slave
->dev
->name
);
4165 res
= dev_set_mac_address(slave
->dev
, addr
);
4167 /* TODO: consider downing the slave
4169 * User should expect communications
4170 * breakage anyway until ARP finish
4173 pr_debug("err %d %s\n", res
, slave
->dev
->name
);
4179 memcpy(bond_dev
->dev_addr
, sa
->sa_data
, bond_dev
->addr_len
);
4183 memcpy(tmp_sa
.sa_data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
4184 tmp_sa
.sa_family
= bond_dev
->type
;
4186 /* unwind from head to the slave that failed */
4188 bond_for_each_slave_from_to(bond
, slave
, i
, bond
->first_slave
, stop_at
) {
4191 tmp_res
= dev_set_mac_address(slave
->dev
, &tmp_sa
);
4193 pr_debug("unwind err %d dev %s\n",
4194 tmp_res
, slave
->dev
->name
);
4201 static int bond_xmit_roundrobin(struct sk_buff
*skb
, struct net_device
*bond_dev
)
4203 struct bonding
*bond
= netdev_priv(bond_dev
);
4204 struct slave
*slave
, *start_at
;
4205 int i
, slave_no
, res
= 1;
4206 struct iphdr
*iph
= ip_hdr(skb
);
4208 read_lock(&bond
->lock
);
4210 if (!BOND_IS_OK(bond
))
4213 * Start with the curr_active_slave that joined the bond as the
4214 * default for sending IGMP traffic. For failover purposes one
4215 * needs to maintain some consistency for the interface that will
4216 * send the join/membership reports. The curr_active_slave found
4217 * will send all of this type of traffic.
4219 if ((iph
->protocol
== IPPROTO_IGMP
) &&
4220 (skb
->protocol
== htons(ETH_P_IP
))) {
4222 read_lock(&bond
->curr_slave_lock
);
4223 slave
= bond
->curr_active_slave
;
4224 read_unlock(&bond
->curr_slave_lock
);
4230 * Concurrent TX may collide on rr_tx_counter; we accept
4231 * that as being rare enough not to justify using an
4234 slave_no
= bond
->rr_tx_counter
++ % bond
->slave_cnt
;
4236 bond_for_each_slave(bond
, slave
, i
) {
4244 bond_for_each_slave_from(bond
, slave
, i
, start_at
) {
4245 if (IS_UP(slave
->dev
) &&
4246 (slave
->link
== BOND_LINK_UP
) &&
4247 (slave
->state
== BOND_STATE_ACTIVE
)) {
4248 res
= bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4255 /* no suitable interface, frame not sent */
4258 read_unlock(&bond
->lock
);
4259 return NETDEV_TX_OK
;
4264 * in active-backup mode, we know that bond->curr_active_slave is always valid if
4265 * the bond has a usable interface.
4267 static int bond_xmit_activebackup(struct sk_buff
*skb
, struct net_device
*bond_dev
)
4269 struct bonding
*bond
= netdev_priv(bond_dev
);
4272 read_lock(&bond
->lock
);
4273 read_lock(&bond
->curr_slave_lock
);
4275 if (!BOND_IS_OK(bond
))
4278 if (!bond
->curr_active_slave
)
4281 res
= bond_dev_queue_xmit(bond
, skb
, bond
->curr_active_slave
->dev
);
4285 /* no suitable interface, frame not sent */
4288 read_unlock(&bond
->curr_slave_lock
);
4289 read_unlock(&bond
->lock
);
4290 return NETDEV_TX_OK
;
4294 * In bond_xmit_xor() , we determine the output device by using a pre-
4295 * determined xmit_hash_policy(), If the selected device is not enabled,
4296 * find the next active slave.
4298 static int bond_xmit_xor(struct sk_buff
*skb
, struct net_device
*bond_dev
)
4300 struct bonding
*bond
= netdev_priv(bond_dev
);
4301 struct slave
*slave
, *start_at
;
4306 read_lock(&bond
->lock
);
4308 if (!BOND_IS_OK(bond
))
4311 slave_no
= bond
->xmit_hash_policy(skb
, bond
->slave_cnt
);
4313 bond_for_each_slave(bond
, slave
, i
) {
4321 bond_for_each_slave_from(bond
, slave
, i
, start_at
) {
4322 if (IS_UP(slave
->dev
) &&
4323 (slave
->link
== BOND_LINK_UP
) &&
4324 (slave
->state
== BOND_STATE_ACTIVE
)) {
4325 res
= bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4332 /* no suitable interface, frame not sent */
4335 read_unlock(&bond
->lock
);
4336 return NETDEV_TX_OK
;
4340 * in broadcast mode, we send everything to all usable interfaces.
4342 static int bond_xmit_broadcast(struct sk_buff
*skb
, struct net_device
*bond_dev
)
4344 struct bonding
*bond
= netdev_priv(bond_dev
);
4345 struct slave
*slave
, *start_at
;
4346 struct net_device
*tx_dev
= NULL
;
4350 read_lock(&bond
->lock
);
4352 if (!BOND_IS_OK(bond
))
4355 read_lock(&bond
->curr_slave_lock
);
4356 start_at
= bond
->curr_active_slave
;
4357 read_unlock(&bond
->curr_slave_lock
);
4362 bond_for_each_slave_from(bond
, slave
, i
, start_at
) {
4363 if (IS_UP(slave
->dev
) &&
4364 (slave
->link
== BOND_LINK_UP
) &&
4365 (slave
->state
== BOND_STATE_ACTIVE
)) {
4367 struct sk_buff
*skb2
= skb_clone(skb
, GFP_ATOMIC
);
4369 pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
4374 res
= bond_dev_queue_xmit(bond
, skb2
, tx_dev
);
4376 dev_kfree_skb(skb2
);
4380 tx_dev
= slave
->dev
;
4385 res
= bond_dev_queue_xmit(bond
, skb
, tx_dev
);
4389 /* no suitable interface, frame not sent */
4392 /* frame sent to all suitable interfaces */
4393 read_unlock(&bond
->lock
);
4394 return NETDEV_TX_OK
;
4397 /*------------------------- Device initialization ---------------------------*/
4399 static void bond_set_xmit_hash_policy(struct bonding
*bond
)
4401 switch (bond
->params
.xmit_policy
) {
4402 case BOND_XMIT_POLICY_LAYER23
:
4403 bond
->xmit_hash_policy
= bond_xmit_hash_policy_l23
;
4405 case BOND_XMIT_POLICY_LAYER34
:
4406 bond
->xmit_hash_policy
= bond_xmit_hash_policy_l34
;
4408 case BOND_XMIT_POLICY_LAYER2
:
4410 bond
->xmit_hash_policy
= bond_xmit_hash_policy_l2
;
4415 static netdev_tx_t
bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4417 const struct bonding
*bond
= netdev_priv(dev
);
4419 switch (bond
->params
.mode
) {
4420 case BOND_MODE_ROUNDROBIN
:
4421 return bond_xmit_roundrobin(skb
, dev
);
4422 case BOND_MODE_ACTIVEBACKUP
:
4423 return bond_xmit_activebackup(skb
, dev
);
4425 return bond_xmit_xor(skb
, dev
);
4426 case BOND_MODE_BROADCAST
:
4427 return bond_xmit_broadcast(skb
, dev
);
4428 case BOND_MODE_8023AD
:
4429 return bond_3ad_xmit_xor(skb
, dev
);
4432 return bond_alb_xmit(skb
, dev
);
4434 /* Should never happen, mode already checked */
4435 pr_err("%s: Error: Unknown bonding mode %d\n",
4436 dev
->name
, bond
->params
.mode
);
4439 return NETDEV_TX_OK
;
4445 * set bond mode specific net device operations
4447 void bond_set_mode_ops(struct bonding
*bond
, int mode
)
4449 struct net_device
*bond_dev
= bond
->dev
;
4452 case BOND_MODE_ROUNDROBIN
:
4454 case BOND_MODE_ACTIVEBACKUP
:
4457 bond_set_xmit_hash_policy(bond
);
4459 case BOND_MODE_BROADCAST
:
4461 case BOND_MODE_8023AD
:
4462 bond_set_master_3ad_flags(bond
);
4463 bond_set_xmit_hash_policy(bond
);
4466 bond_set_master_alb_flags(bond
);
4471 /* Should never happen, mode already checked */
4472 pr_err("%s: Error: Unknown bonding mode %d\n",
4473 bond_dev
->name
, mode
);
4478 static void bond_ethtool_get_drvinfo(struct net_device
*bond_dev
,
4479 struct ethtool_drvinfo
*drvinfo
)
4481 strncpy(drvinfo
->driver
, DRV_NAME
, 32);
4482 strncpy(drvinfo
->version
, DRV_VERSION
, 32);
4483 snprintf(drvinfo
->fw_version
, 32, "%d", BOND_ABI_VERSION
);
4486 static const struct ethtool_ops bond_ethtool_ops
= {
4487 .get_drvinfo
= bond_ethtool_get_drvinfo
,
4488 .get_link
= ethtool_op_get_link
,
4489 .get_tx_csum
= ethtool_op_get_tx_csum
,
4490 .get_sg
= ethtool_op_get_sg
,
4491 .get_tso
= ethtool_op_get_tso
,
4492 .get_ufo
= ethtool_op_get_ufo
,
4493 .get_flags
= ethtool_op_get_flags
,
4496 static const struct net_device_ops bond_netdev_ops
= {
4497 .ndo_init
= bond_init
,
4498 .ndo_uninit
= bond_uninit
,
4499 .ndo_open
= bond_open
,
4500 .ndo_stop
= bond_close
,
4501 .ndo_start_xmit
= bond_start_xmit
,
4502 .ndo_get_stats
= bond_get_stats
,
4503 .ndo_do_ioctl
= bond_do_ioctl
,
4504 .ndo_set_multicast_list
= bond_set_multicast_list
,
4505 .ndo_change_mtu
= bond_change_mtu
,
4506 .ndo_set_mac_address
= bond_set_mac_address
,
4507 .ndo_neigh_setup
= bond_neigh_setup
,
4508 .ndo_vlan_rx_register
= bond_vlan_rx_register
,
4509 .ndo_vlan_rx_add_vid
= bond_vlan_rx_add_vid
,
4510 .ndo_vlan_rx_kill_vid
= bond_vlan_rx_kill_vid
,
4511 #ifdef CONFIG_NET_POLL_CONTROLLER
4512 .ndo_netpoll_cleanup
= bond_netpoll_cleanup
,
4513 .ndo_poll_controller
= bond_poll_controller
,
4517 static void bond_destructor(struct net_device
*bond_dev
)
4519 struct bonding
*bond
= netdev_priv(bond_dev
);
4521 destroy_workqueue(bond
->wq
);
4522 free_netdev(bond_dev
);
4525 static void bond_setup(struct net_device
*bond_dev
)
4527 struct bonding
*bond
= netdev_priv(bond_dev
);
4529 /* initialize rwlocks */
4530 rwlock_init(&bond
->lock
);
4531 rwlock_init(&bond
->curr_slave_lock
);
4533 bond
->params
= bonding_defaults
;
4535 /* Initialize pointers */
4536 bond
->dev
= bond_dev
;
4537 INIT_LIST_HEAD(&bond
->vlan_list
);
4539 /* Initialize the device entry points */
4540 ether_setup(bond_dev
);
4541 bond_dev
->netdev_ops
= &bond_netdev_ops
;
4542 bond_dev
->ethtool_ops
= &bond_ethtool_ops
;
4543 bond_set_mode_ops(bond
, bond
->params
.mode
);
4545 bond_dev
->destructor
= bond_destructor
;
4547 /* Initialize the device options */
4548 bond_dev
->tx_queue_len
= 0;
4549 bond_dev
->flags
|= IFF_MASTER
|IFF_MULTICAST
;
4550 bond_dev
->priv_flags
|= IFF_BONDING
;
4551 bond_dev
->priv_flags
&= ~IFF_XMIT_DST_RELEASE
;
4553 if (bond
->params
.arp_interval
)
4554 bond_dev
->priv_flags
|= IFF_MASTER_ARPMON
;
4556 /* At first, we block adding VLANs. That's the only way to
4557 * prevent problems that occur when adding VLANs over an
4558 * empty bond. The block will be removed once non-challenged
4559 * slaves are enslaved.
4561 bond_dev
->features
|= NETIF_F_VLAN_CHALLENGED
;
4563 /* don't acquire bond device's netif_tx_lock when
4565 bond_dev
->features
|= NETIF_F_LLTX
;
4567 /* By default, we declare the bond to be fully
4568 * VLAN hardware accelerated capable. Special
4569 * care is taken in the various xmit functions
4570 * when there are slaves that are not hw accel
4573 bond_dev
->features
|= (NETIF_F_HW_VLAN_TX
|
4574 NETIF_F_HW_VLAN_RX
|
4575 NETIF_F_HW_VLAN_FILTER
);
4579 static void bond_work_cancel_all(struct bonding
*bond
)
4581 write_lock_bh(&bond
->lock
);
4582 bond
->kill_timers
= 1;
4583 write_unlock_bh(&bond
->lock
);
4585 if (bond
->params
.miimon
&& delayed_work_pending(&bond
->mii_work
))
4586 cancel_delayed_work(&bond
->mii_work
);
4588 if (bond
->params
.arp_interval
&& delayed_work_pending(&bond
->arp_work
))
4589 cancel_delayed_work(&bond
->arp_work
);
4591 if (bond
->params
.mode
== BOND_MODE_ALB
&&
4592 delayed_work_pending(&bond
->alb_work
))
4593 cancel_delayed_work(&bond
->alb_work
);
4595 if (bond
->params
.mode
== BOND_MODE_8023AD
&&
4596 delayed_work_pending(&bond
->ad_work
))
4597 cancel_delayed_work(&bond
->ad_work
);
4601 * Destroy a bonding device.
4602 * Must be under rtnl_lock when this function is called.
4604 static void bond_uninit(struct net_device
*bond_dev
)
4606 struct bonding
*bond
= netdev_priv(bond_dev
);
4608 bond_netpoll_cleanup(bond_dev
);
4610 /* Release the bonded slaves */
4611 bond_release_all(bond_dev
);
4613 list_del(&bond
->bond_list
);
4615 bond_work_cancel_all(bond
);
4617 bond_remove_proc_entry(bond
);
4619 __hw_addr_flush(&bond
->mc_list
);
4622 /*------------------------- Module initialization ---------------------------*/
4625 * Convert string input module parms. Accept either the
4626 * number of the mode or its string name. A bit complicated because
4627 * some mode names are substrings of other names, and calls from sysfs
4628 * may have whitespace in the name (trailing newlines, for example).
4630 int bond_parse_parm(const char *buf
, const struct bond_parm_tbl
*tbl
)
4632 int modeint
= -1, i
, rv
;
4633 char *p
, modestr
[BOND_MAX_MODENAME_LEN
+ 1] = { 0, };
4635 for (p
= (char *)buf
; *p
; p
++)
4636 if (!(isdigit(*p
) || isspace(*p
)))
4640 rv
= sscanf(buf
, "%20s", modestr
);
4642 rv
= sscanf(buf
, "%d", &modeint
);
4647 for (i
= 0; tbl
[i
].modename
; i
++) {
4648 if (modeint
== tbl
[i
].mode
)
4650 if (strcmp(modestr
, tbl
[i
].modename
) == 0)
4657 static int bond_check_params(struct bond_params
*params
)
4659 int arp_validate_value
, fail_over_mac_value
, primary_reselect_value
;
4662 * Convert string parameters.
4665 bond_mode
= bond_parse_parm(mode
, bond_mode_tbl
);
4666 if (bond_mode
== -1) {
4667 pr_err("Error: Invalid bonding mode \"%s\"\n",
4668 mode
== NULL
? "NULL" : mode
);
4673 if (xmit_hash_policy
) {
4674 if ((bond_mode
!= BOND_MODE_XOR
) &&
4675 (bond_mode
!= BOND_MODE_8023AD
)) {
4676 pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
4677 bond_mode_name(bond_mode
));
4679 xmit_hashtype
= bond_parse_parm(xmit_hash_policy
,
4681 if (xmit_hashtype
== -1) {
4682 pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
4683 xmit_hash_policy
== NULL
? "NULL" :
4691 if (bond_mode
!= BOND_MODE_8023AD
) {
4692 pr_info("lacp_rate param is irrelevant in mode %s\n",
4693 bond_mode_name(bond_mode
));
4695 lacp_fast
= bond_parse_parm(lacp_rate
, bond_lacp_tbl
);
4696 if (lacp_fast
== -1) {
4697 pr_err("Error: Invalid lacp rate \"%s\"\n",
4698 lacp_rate
== NULL
? "NULL" : lacp_rate
);
4705 params
->ad_select
= bond_parse_parm(ad_select
, ad_select_tbl
);
4706 if (params
->ad_select
== -1) {
4707 pr_err("Error: Invalid ad_select \"%s\"\n",
4708 ad_select
== NULL
? "NULL" : ad_select
);
4712 if (bond_mode
!= BOND_MODE_8023AD
) {
4713 pr_warning("ad_select param only affects 802.3ad mode\n");
4716 params
->ad_select
= BOND_AD_STABLE
;
4719 if (max_bonds
< 0) {
4720 pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4721 max_bonds
, 0, INT_MAX
, BOND_DEFAULT_MAX_BONDS
);
4722 max_bonds
= BOND_DEFAULT_MAX_BONDS
;
4726 pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
4727 miimon
, INT_MAX
, BOND_LINK_MON_INTERV
);
4728 miimon
= BOND_LINK_MON_INTERV
;
4732 pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4737 if (downdelay
< 0) {
4738 pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4739 downdelay
, INT_MAX
);
4743 if ((use_carrier
!= 0) && (use_carrier
!= 1)) {
4744 pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
4749 if (num_grat_arp
< 0 || num_grat_arp
> 255) {
4750 pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1\n",
4755 if (num_unsol_na
< 0 || num_unsol_na
> 255) {
4756 pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
4761 /* reset values for 802.3ad */
4762 if (bond_mode
== BOND_MODE_8023AD
) {
4764 pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
4765 pr_warning("Forcing miimon to 100msec\n");
4770 /* reset values for TLB/ALB */
4771 if ((bond_mode
== BOND_MODE_TLB
) ||
4772 (bond_mode
== BOND_MODE_ALB
)) {
4774 pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
4775 pr_warning("Forcing miimon to 100msec\n");
4780 if (bond_mode
== BOND_MODE_ALB
) {
4781 pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
4786 if (updelay
|| downdelay
) {
4787 /* just warn the user the up/down delay will have
4788 * no effect since miimon is zero...
4790 pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
4791 updelay
, downdelay
);
4794 /* don't allow arp monitoring */
4796 pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
4797 miimon
, arp_interval
);
4801 if ((updelay
% miimon
) != 0) {
4802 pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
4804 (updelay
/ miimon
) * miimon
);
4809 if ((downdelay
% miimon
) != 0) {
4810 pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
4812 (downdelay
/ miimon
) * miimon
);
4815 downdelay
/= miimon
;
4818 if (arp_interval
< 0) {
4819 pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n",
4820 arp_interval
, INT_MAX
, BOND_LINK_ARP_INTERV
);
4821 arp_interval
= BOND_LINK_ARP_INTERV
;
4824 for (arp_ip_count
= 0;
4825 (arp_ip_count
< BOND_MAX_ARP_TARGETS
) && arp_ip_target
[arp_ip_count
];
4827 /* not complete check, but should be good enough to
4829 if (!isdigit(arp_ip_target
[arp_ip_count
][0])) {
4830 pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
4831 arp_ip_target
[arp_ip_count
]);
4834 __be32 ip
= in_aton(arp_ip_target
[arp_ip_count
]);
4835 arp_target
[arp_ip_count
] = ip
;
4839 if (arp_interval
&& !arp_ip_count
) {
4840 /* don't allow arping if no arp_ip_target given... */
4841 pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
4847 if (bond_mode
!= BOND_MODE_ACTIVEBACKUP
) {
4848 pr_err("arp_validate only supported in active-backup mode\n");
4851 if (!arp_interval
) {
4852 pr_err("arp_validate requires arp_interval\n");
4856 arp_validate_value
= bond_parse_parm(arp_validate
,
4858 if (arp_validate_value
== -1) {
4859 pr_err("Error: invalid arp_validate \"%s\"\n",
4860 arp_validate
== NULL
? "NULL" : arp_validate
);
4864 arp_validate_value
= 0;
4867 pr_info("MII link monitoring set to %d ms\n", miimon
);
4868 } else if (arp_interval
) {
4871 pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
4873 arp_validate_tbl
[arp_validate_value
].modename
,
4876 for (i
= 0; i
< arp_ip_count
; i
++)
4877 pr_info(" %s", arp_ip_target
[i
]);
4881 } else if (max_bonds
) {
4882 /* miimon and arp_interval not set, we need one so things
4883 * work as expected, see bonding.txt for details
4885 pr_warning("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
4888 if (primary
&& !USES_PRIMARY(bond_mode
)) {
4889 /* currently, using a primary only makes sense
4890 * in active backup, TLB or ALB modes
4892 pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
4893 primary
, bond_mode_name(bond_mode
));
4897 if (primary
&& primary_reselect
) {
4898 primary_reselect_value
= bond_parse_parm(primary_reselect
,
4900 if (primary_reselect_value
== -1) {
4901 pr_err("Error: Invalid primary_reselect \"%s\"\n",
4903 NULL
? "NULL" : primary_reselect
);
4907 primary_reselect_value
= BOND_PRI_RESELECT_ALWAYS
;
4910 if (fail_over_mac
) {
4911 fail_over_mac_value
= bond_parse_parm(fail_over_mac
,
4913 if (fail_over_mac_value
== -1) {
4914 pr_err("Error: invalid fail_over_mac \"%s\"\n",
4915 arp_validate
== NULL
? "NULL" : arp_validate
);
4919 if (bond_mode
!= BOND_MODE_ACTIVEBACKUP
)
4920 pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
4922 fail_over_mac_value
= BOND_FOM_NONE
;
4925 /* fill params struct with the proper values */
4926 params
->mode
= bond_mode
;
4927 params
->xmit_policy
= xmit_hashtype
;
4928 params
->miimon
= miimon
;
4929 params
->num_grat_arp
= num_grat_arp
;
4930 params
->num_unsol_na
= num_unsol_na
;
4931 params
->arp_interval
= arp_interval
;
4932 params
->arp_validate
= arp_validate_value
;
4933 params
->updelay
= updelay
;
4934 params
->downdelay
= downdelay
;
4935 params
->use_carrier
= use_carrier
;
4936 params
->lacp_fast
= lacp_fast
;
4937 params
->primary
[0] = 0;
4938 params
->primary_reselect
= primary_reselect_value
;
4939 params
->fail_over_mac
= fail_over_mac_value
;
4942 strncpy(params
->primary
, primary
, IFNAMSIZ
);
4943 params
->primary
[IFNAMSIZ
- 1] = 0;
4946 memcpy(params
->arp_targets
, arp_target
, sizeof(arp_target
));
4951 static struct lock_class_key bonding_netdev_xmit_lock_key
;
4952 static struct lock_class_key bonding_netdev_addr_lock_key
;
4954 static void bond_set_lockdep_class_one(struct net_device
*dev
,
4955 struct netdev_queue
*txq
,
4958 lockdep_set_class(&txq
->_xmit_lock
,
4959 &bonding_netdev_xmit_lock_key
);
4962 static void bond_set_lockdep_class(struct net_device
*dev
)
4964 lockdep_set_class(&dev
->addr_list_lock
,
4965 &bonding_netdev_addr_lock_key
);
4966 netdev_for_each_tx_queue(dev
, bond_set_lockdep_class_one
, NULL
);
4970 * Called from registration process
4972 static int bond_init(struct net_device
*bond_dev
)
4974 struct bonding
*bond
= netdev_priv(bond_dev
);
4975 struct bond_net
*bn
= net_generic(dev_net(bond_dev
), bond_net_id
);
4977 pr_debug("Begin bond_init for %s\n", bond_dev
->name
);
4979 bond
->wq
= create_singlethread_workqueue(bond_dev
->name
);
4983 bond_set_lockdep_class(bond_dev
);
4985 netif_carrier_off(bond_dev
);
4987 bond_create_proc_entry(bond
);
4988 list_add_tail(&bond
->bond_list
, &bn
->dev_list
);
4990 bond_prepare_sysfs_group(bond
);
4992 __hw_addr_init(&bond
->mc_list
);
4996 static int bond_validate(struct nlattr
*tb
[], struct nlattr
*data
[])
4998 if (tb
[IFLA_ADDRESS
]) {
4999 if (nla_len(tb
[IFLA_ADDRESS
]) != ETH_ALEN
)
5001 if (!is_valid_ether_addr(nla_data(tb
[IFLA_ADDRESS
])))
5002 return -EADDRNOTAVAIL
;
5007 static struct rtnl_link_ops bond_link_ops __read_mostly
= {
5009 .priv_size
= sizeof(struct bonding
),
5010 .setup
= bond_setup
,
5011 .validate
= bond_validate
,
5014 /* Create a new bond based on the specified name and bonding parameters.
5015 * If name is NULL, obtain a suitable "bond%d" name for us.
5016 * Caller must NOT hold rtnl_lock; we need to release it here before we
5017 * set up our sysfs entries.
5019 int bond_create(struct net
*net
, const char *name
)
5021 struct net_device
*bond_dev
;
5026 bond_dev
= alloc_netdev(sizeof(struct bonding
), name
? name
: "",
5029 pr_err("%s: eek! can't alloc netdev!\n", name
);
5034 dev_net_set(bond_dev
, net
);
5035 bond_dev
->rtnl_link_ops
= &bond_link_ops
;
5038 res
= dev_alloc_name(bond_dev
, "bond%d");
5043 res
= register_netdevice(bond_dev
);
5048 bond_destructor(bond_dev
);
5052 static int __net_init
bond_net_init(struct net
*net
)
5054 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
5057 INIT_LIST_HEAD(&bn
->dev_list
);
5059 bond_create_proc_dir(bn
);
5064 static void __net_exit
bond_net_exit(struct net
*net
)
5066 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
5068 bond_destroy_proc_dir(bn
);
5071 static struct pernet_operations bond_net_ops
= {
5072 .init
= bond_net_init
,
5073 .exit
= bond_net_exit
,
5075 .size
= sizeof(struct bond_net
),
5078 static int __init
bonding_init(void)
5083 pr_info("%s", version
);
5085 res
= bond_check_params(&bonding_defaults
);
5089 res
= register_pernet_subsys(&bond_net_ops
);
5093 res
= rtnl_link_register(&bond_link_ops
);
5097 for (i
= 0; i
< max_bonds
; i
++) {
5098 res
= bond_create(&init_net
, NULL
);
5103 res
= bond_create_sysfs();
5107 register_netdevice_notifier(&bond_netdev_notifier
);
5108 register_inetaddr_notifier(&bond_inetaddr_notifier
);
5109 bond_register_ipv6_notifier();
5113 rtnl_link_unregister(&bond_link_ops
);
5115 unregister_pernet_subsys(&bond_net_ops
);
5120 static void __exit
bonding_exit(void)
5122 unregister_netdevice_notifier(&bond_netdev_notifier
);
5123 unregister_inetaddr_notifier(&bond_inetaddr_notifier
);
5124 bond_unregister_ipv6_notifier();
5126 bond_destroy_sysfs();
5128 rtnl_link_unregister(&bond_link_ops
);
5129 unregister_pernet_subsys(&bond_net_ops
);
5132 module_init(bonding_init
);
5133 module_exit(bonding_exit
);
5134 MODULE_LICENSE("GPL");
5135 MODULE_VERSION(DRV_VERSION
);
5136 MODULE_DESCRIPTION(DRV_DESCRIPTION
", v" DRV_VERSION
);
5137 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
5138 MODULE_ALIAS_RTNL_LINK("bond");