drivers/net/wireless/iwlwifi/Kconfig

   1 config IWLWIFI
   2         tristate "Intel Wireless Wifi"
   3         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   4         select LIB80211
   5         select FW_LOADER
   6         select MAC80211_LEDS if IWLWIFI_LEDS
   7         select LEDS_CLASS if IWLWIFI_LEDS
   8
   9 config IWLWIFI_LEDS
  10         bool "Enable LED support in iwlagn and iwl3945 drivers"
  11         depends on IWLWIFI
  12
  13 config IWLWIFI_SPECTRUM_MEASUREMENT
  14         bool "Enable Spectrum Measurement in iwlagn driver"
  15         depends on IWLWIFI
  16         ---help---
  17           This option will enable spectrum measurement for the iwlagn driver.
  18
  19 config IWLWIFI_DEBUG
  20         bool "Enable full debugging output in iwlagn and iwl3945 drivers"
  21         depends on IWLWIFI
  22         ---help---
  23           This option will enable debug tracing output for the iwlwifi drivers
  24
  25           This will result in the kernel module being ~100k larger.  You can
  26           control which debug output is sent to the kernel log by setting the
  27           value in
  28
  29                 /sys/class/net/wlan0/device/debug_level
  30
  31           This entry will only exist if this option is enabled.
  32
  33           To set a value, simply echo an 8-byte hex value to the same file:
  34
  35                   % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
  36
  37           You can find the list of debug mask values in:
  38                   drivers/net/wireless/iwlwifi/iwl-debug.h
  39
  40           If this is your first time using this driver, you should say Y here
  41           as the debug information can assist others in helping you resolve
  42           any problems you may encounter.
  43
  44 config IWLWIFI_DEBUGFS
  45         bool "iwlagn debugfs support"
  46         depends on IWLWIFI && IWLWIFI_DEBUG && MAC80211_DEBUGFS
  47         ---help---
  48           Enable creation of debugfs files for the iwlwifi drivers.
  49
  50 config IWLAGN
  51         tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
  52         depends on IWLWIFI
  53         ---help---
  54           Select to build the driver supporting the:
  55
  56           Intel Wireless WiFi Link Next-Gen AGN
  57
  58           This driver uses the kernel's mac80211 subsystem.
  59
  60           In order to use this driver, you will need a microcode (uCode)
  61           image for it. You can obtain the microcode from:
  62
  63                   <http://intellinuxwireless.org/>.
  64
  65           The microcode is typically installed in /lib/firmware. You can
  66           look in the hotplug script /etc/hotplug/firmware.agent to
  67           determine which directory FIRMWARE_DIR is set to when the script
  68           runs.
  69
  70           If you want to compile the driver as a module ( = code which can be
  71           inserted in and removed from the running kernel whenever you want),
  72           say M here and read <file:Documentation/kbuild/modules.txt>.  The
  73           module will be called iwlagn.
  74
  75
  76 config IWL4965
  77         bool "Intel Wireless WiFi 4965AGN"
  78         depends on IWLAGN
  79         ---help---
  80           This option enables support for Intel Wireless WiFi Link 4965AGN
  81
  82 config IWL5000
  83         bool "Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series"
  84         depends on IWLAGN
  85         ---help---
  86           This option enables support for Intel Wireless WiFi Link 5000AGN Family
  87
  88 config IWL3945
  89         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
  90         depends on IWLWIFI
  91         ---help---
  92           Select to build the driver supporting the:
  93
  94           Intel PRO/Wireless 3945ABG/BG Network Connection
  95
  96           This driver uses the kernel's mac80211 subsystem.
  97
  98           In order to use this driver, you will need a microcode (uCode)
  99           image for it. You can obtain the microcode from:
 100
 101                   <http://intellinuxwireless.org/>.
 102
 103           The microcode is typically installed in /lib/firmware. You can
 104           look in the hotplug script /etc/hotplug/firmware.agent to
 105           determine which directory FIRMWARE_DIR is set to when the script
 106           runs.
 107
 108           If you want to compile the driver as a module ( = code which can be
 109           inserted in and removed from the running kernel whenever you want),
 110           say M here and read <file:Documentation/kbuild/modules.txt>.  The
 111           module will be called iwl3945.
 112
 113 config IWL3945_SPECTRUM_MEASUREMENT
 114         bool "Enable Spectrum Measurement in iwl3945 driver"
 115         depends on IWL3945
 116         ---help---
 117           This option will enable spectrum measurement for the iwl3945 driver.