1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of version 2 of the GNU General Public License as
13 * published by the Free Software Foundation.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
25 * The full GNU General Public License is included in this distribution
26 * in the file called COPYING.
28 * Contact Information:
29 * Intel Linux Wireless <ilw@linux.intel.com>
30 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
34 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
35 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
36 * All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
42 * * Redistributions of source code must retain the above copyright
43 * notice, this list of conditions and the following disclaimer.
44 * * Redistributions in binary form must reproduce the above copyright
45 * notice, this list of conditions and the following disclaimer in
46 * the documentation and/or other materials provided with the
48 * * Neither the name Intel Corporation nor the names of its
49 * contributors may be used to endorse or promote products derived
50 * from this software without specific prior written permission.
52 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
53 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
54 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
55 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
56 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
57 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
58 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
59 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
60 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
61 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
62 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
63 *****************************************************************************/
65 #ifndef __iwl_fw_file_h__
66 #define __iwl_fw_file_h__
68 #include <linux/netdevice.h>
69 #include <linux/nl80211.h>
71 /* v1/v2 uCode file layout */
72 struct iwl_ucode_header
{
73 __le32 ver
; /* major/minor/API/serial */
76 __le32 inst_size
; /* bytes of runtime code */
77 __le32 data_size
; /* bytes of runtime data */
78 __le32 init_size
; /* bytes of init code */
79 __le32 init_data_size
; /* bytes of init data */
80 __le32 boot_size
; /* bytes of bootstrap code */
81 u8 data
[0]; /* in same order as sizes */
84 __le32 build
; /* build number */
85 __le32 inst_size
; /* bytes of runtime code */
86 __le32 data_size
; /* bytes of runtime data */
87 __le32 init_size
; /* bytes of init code */
88 __le32 init_data_size
; /* bytes of init data */
89 __le32 boot_size
; /* bytes of bootstrap code */
90 u8 data
[0]; /* in same order as sizes */
96 * new TLV uCode file layout
98 * The new TLV file format contains TLVs, that each specify
102 enum iwl_ucode_tlv_type
{
103 IWL_UCODE_TLV_INVALID
= 0, /* unused */
104 IWL_UCODE_TLV_INST
= 1,
105 IWL_UCODE_TLV_DATA
= 2,
106 IWL_UCODE_TLV_INIT
= 3,
107 IWL_UCODE_TLV_INIT_DATA
= 4,
108 IWL_UCODE_TLV_BOOT
= 5,
109 IWL_UCODE_TLV_PROBE_MAX_LEN
= 6, /* a u32 value */
110 IWL_UCODE_TLV_PAN
= 7,
111 IWL_UCODE_TLV_RUNT_EVTLOG_PTR
= 8,
112 IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
= 9,
113 IWL_UCODE_TLV_RUNT_ERRLOG_PTR
= 10,
114 IWL_UCODE_TLV_INIT_EVTLOG_PTR
= 11,
115 IWL_UCODE_TLV_INIT_EVTLOG_SIZE
= 12,
116 IWL_UCODE_TLV_INIT_ERRLOG_PTR
= 13,
117 IWL_UCODE_TLV_ENHANCE_SENS_TBL
= 14,
118 IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
= 15,
119 IWL_UCODE_TLV_WOWLAN_INST
= 16,
120 IWL_UCODE_TLV_WOWLAN_DATA
= 17,
121 IWL_UCODE_TLV_FLAGS
= 18,
122 IWL_UCODE_TLV_SEC_RT
= 19,
123 IWL_UCODE_TLV_SEC_INIT
= 20,
124 IWL_UCODE_TLV_SEC_WOWLAN
= 21,
125 IWL_UCODE_TLV_DEF_CALIB
= 22,
126 IWL_UCODE_TLV_PHY_SKU
= 23,
127 IWL_UCODE_TLV_SECURE_SEC_RT
= 24,
128 IWL_UCODE_TLV_SECURE_SEC_INIT
= 25,
129 IWL_UCODE_TLV_SECURE_SEC_WOWLAN
= 26,
130 IWL_UCODE_TLV_NUM_OF_CPU
= 27,
131 IWL_UCODE_TLV_CSCHEME
= 28,
132 IWL_UCODE_TLV_API_CHANGES_SET
= 29,
133 IWL_UCODE_TLV_ENABLED_CAPABILITIES
= 30,
134 IWL_UCODE_TLV_N_SCAN_CHANNELS
= 31,
135 IWL_UCODE_TLV_SEC_RT_USNIFFER
= 34,
136 IWL_UCODE_TLV_SDIO_ADMA_ADDR
= 35,
137 IWL_UCODE_TLV_FW_VERSION
= 36,
138 IWL_UCODE_TLV_FW_DBG_DEST
= 38,
139 IWL_UCODE_TLV_FW_DBG_CONF
= 39,
140 IWL_UCODE_TLV_FW_DBG_TRIGGER
= 40,
143 struct iwl_ucode_tlv
{
144 __le32 type
; /* see above */
145 __le32 length
; /* not including type/length fields */
149 #define IWL_TLV_UCODE_MAGIC 0x0a4c5749
150 #define FW_VER_HUMAN_READABLE_SZ 64
152 struct iwl_tlv_ucode_header
{
154 * The TLV style ucode header is distinguished from
155 * the v1/v2 style header by first four bytes being
156 * zero, as such is an invalid combination of
157 * major/minor/API/serial versions.
161 u8 human_readable
[FW_VER_HUMAN_READABLE_SZ
];
162 /* major/minor/API/serial or major in new format */
167 * The data contained herein has a TLV layout,
168 * see above for the TLV header and types.
169 * Note that each TLV is padded to a length
170 * that is a multiple of 4 for alignment.
178 * ability to get extension for: flags & capabilities from ucode binaries files
180 struct iwl_ucode_api
{
185 struct iwl_ucode_capa
{
191 * enum iwl_ucode_tlv_flag - ucode API flags
192 * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
193 * was a separate TLV but moved here to save space.
194 * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
195 * treats good CRC threshold as a boolean
196 * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
197 * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
198 * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
199 * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
200 * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
201 * offload profile config command.
202 * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
203 * (rather than two) IPv6 addresses
204 * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
205 * from the probe request template.
206 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
207 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
208 * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
209 * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
210 * P2P client interfaces simultaneously if they are in different bindings.
211 * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
212 * P2P client interfaces simultaneously if they are in same bindings.
213 * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
214 * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
215 * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
216 * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
217 * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
219 enum iwl_ucode_tlv_flag
{
220 IWL_UCODE_TLV_FLAGS_PAN
= BIT(0),
221 IWL_UCODE_TLV_FLAGS_NEWSCAN
= BIT(1),
222 IWL_UCODE_TLV_FLAGS_MFP
= BIT(2),
223 IWL_UCODE_TLV_FLAGS_P2P
= BIT(3),
224 IWL_UCODE_TLV_FLAGS_DW_BC_TABLE
= BIT(4),
225 IWL_UCODE_TLV_FLAGS_SHORT_BL
= BIT(7),
226 IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS
= BIT(10),
227 IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID
= BIT(12),
228 IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL
= BIT(15),
229 IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE
= BIT(16),
230 IWL_UCODE_TLV_FLAGS_P2P_PM
= BIT(21),
231 IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM
= BIT(22),
232 IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM
= BIT(23),
233 IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT
= BIT(24),
234 IWL_UCODE_TLV_FLAGS_EBS_SUPPORT
= BIT(25),
235 IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD
= BIT(26),
236 IWL_UCODE_TLV_FLAGS_BCAST_FILTERING
= BIT(29),
237 IWL_UCODE_TLV_FLAGS_GO_UAPSD
= BIT(30),
241 * enum iwl_ucode_tlv_api - ucode api
242 * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
243 * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
244 * longer than the passive one, which is essential for fragmented scan.
245 * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
246 * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR
247 * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power.
248 * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command,
249 * regardless of the band or the number of the probes. FW will calculate
250 * the actual dwell time.
251 * @IWL_UCODE_TLV_API_SCD_CFG: This firmware can configure the scheduler
252 * through the dedicated host command.
253 * @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too.
254 * @IWL_UCODE_TLV_API_ASYNC_DTM: Async temperature notifications are supported.
255 * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
256 * @IWL_UCODE_TLV_API_STATS_V10: uCode supports/uses statistics API version 10
257 * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
259 enum iwl_ucode_tlv_api
{
260 IWL_UCODE_TLV_API_BT_COEX_SPLIT
= BIT(3),
261 IWL_UCODE_TLV_API_FRAGMENTED_SCAN
= BIT(8),
262 IWL_UCODE_TLV_API_WIFI_MCC_UPDATE
= BIT(9),
263 IWL_UCODE_TLV_API_HDC_PHASE_0
= BIT(10),
264 IWL_UCODE_TLV_API_TX_POWER_DEV
= BIT(11),
265 IWL_UCODE_TLV_API_BASIC_DWELL
= BIT(13),
266 IWL_UCODE_TLV_API_SCD_CFG
= BIT(15),
267 IWL_UCODE_TLV_API_SINGLE_SCAN_EBS
= BIT(16),
268 IWL_UCODE_TLV_API_ASYNC_DTM
= BIT(17),
269 IWL_UCODE_TLV_API_LQ_SS_PARAMS
= BIT(18),
270 IWL_UCODE_TLV_API_STATS_V10
= BIT(19),
271 IWL_UCODE_TLV_API_NEW_VERSION
= BIT(20),
275 * enum iwl_ucode_tlv_capa - ucode capabilities
276 * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
277 * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
278 * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
279 * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
280 * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
281 * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
282 * tx power value into TPC Report action frame and Link Measurement Report
284 * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
285 * channel in DS parameter set element in probe requests.
286 * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
288 * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
289 * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
290 * which also implies support for the scheduler configuration command
291 * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
292 * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
293 * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
294 * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
295 * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
296 * sources for the MCC. This TLV bit is a future replacement to
297 * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
299 * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
301 enum iwl_ucode_tlv_capa
{
302 IWL_UCODE_TLV_CAPA_D0I3_SUPPORT
= BIT(0),
303 IWL_UCODE_TLV_CAPA_LAR_SUPPORT
= BIT(1),
304 IWL_UCODE_TLV_CAPA_UMAC_SCAN
= BIT(2),
305 IWL_UCODE_TLV_CAPA_BEAMFORMER
= BIT(3),
306 IWL_UCODE_TLV_CAPA_TDLS_SUPPORT
= BIT(6),
307 IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT
= BIT(8),
308 IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT
= BIT(9),
309 IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT
= BIT(10),
310 IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT
= BIT(11),
311 IWL_UCODE_TLV_CAPA_DQA_SUPPORT
= BIT(12),
312 IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH
= BIT(13),
313 IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT
= BIT(18),
314 IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS
= BIT(22),
315 IWL_UCODE_TLV_CAPA_BT_COEX_PLCR
= BIT(28),
316 IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC
= BIT(29),
317 IWL_UCODE_TLV_CAPA_BT_COEX_RRC
= BIT(30),
320 /* The default calibrate table size if not specified by firmware file */
321 #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
322 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
323 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
325 /* The default max probe length if not specified by the firmware file */
326 #define IWL_DEFAULT_MAX_PROBE_LENGTH 200
329 * For 16.0 uCode and above, there is no differentiation between sections,
330 * just an offset to the HW address.
332 #define IWL_UCODE_SECTION_MAX 12
333 #define IWL_API_ARRAY_SIZE 1
334 #define IWL_CAPABILITIES_ARRAY_SIZE 1
335 #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
337 /* uCode version contains 4 values: Major/Minor/API/Serial */
338 #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
339 #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
340 #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
341 #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
344 * Calibration control struct.
345 * Sent as part of the phy configuration command.
346 * @flow_trigger: bitmap for which calibrations to perform according to
348 * @event_trigger: bitmap for which calibrations to perform according to
351 struct iwl_tlv_calib_ctrl
{
353 __le32 event_trigger
;
356 enum iwl_fw_phy_cfg
{
357 FW_PHY_CFG_RADIO_TYPE_POS
= 0,
358 FW_PHY_CFG_RADIO_TYPE
= 0x3 << FW_PHY_CFG_RADIO_TYPE_POS
,
359 FW_PHY_CFG_RADIO_STEP_POS
= 2,
360 FW_PHY_CFG_RADIO_STEP
= 0x3 << FW_PHY_CFG_RADIO_STEP_POS
,
361 FW_PHY_CFG_RADIO_DASH_POS
= 4,
362 FW_PHY_CFG_RADIO_DASH
= 0x3 << FW_PHY_CFG_RADIO_DASH_POS
,
363 FW_PHY_CFG_TX_CHAIN_POS
= 16,
364 FW_PHY_CFG_TX_CHAIN
= 0xf << FW_PHY_CFG_TX_CHAIN_POS
,
365 FW_PHY_CFG_RX_CHAIN_POS
= 20,
366 FW_PHY_CFG_RX_CHAIN
= 0xf << FW_PHY_CFG_RX_CHAIN_POS
,
369 #define IWL_UCODE_MAX_CS 1
372 * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
373 * @cipher: a cipher suite selector
374 * @flags: cipher scheme flags (currently reserved for a future use)
375 * @hdr_len: a size of MPDU security header
376 * @pn_len: a size of PN
377 * @pn_off: an offset of pn from the beginning of the security header
378 * @key_idx_off: an offset of key index byte in the security header
379 * @key_idx_mask: a bit mask of key_idx bits
380 * @key_idx_shift: bit shift needed to get key_idx
381 * @mic_len: mic length in bytes
382 * @hw_cipher: a HW cipher index used in host commands
384 struct iwl_fw_cipher_scheme
{
397 enum iwl_fw_dbg_reg_operator
{
408 * struct iwl_fw_dbg_reg_op - an operation on a register
410 * @op: %enum iwl_fw_dbg_reg_operator
411 * @addr: offset of the register
414 struct iwl_fw_dbg_reg_op
{
422 * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
424 * @SMEM_MODE: monitor stores the data in SMEM
425 * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
426 * @MARBH_MODE: monitor stores the data in MARBH buffer
428 enum iwl_fw_dbg_monitor_mode
{
435 * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
437 * @version: version of the TLV - currently 0
438 * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
439 * @base_reg: addr of the base addr register (PRPH)
440 * @end_reg: addr of the end addr register (PRPH)
441 * @write_ptr_reg: the addr of the reg of the write pointer
442 * @wrap_count: the addr of the reg of the wrap_count
443 * @base_shift: shift right of the base addr reg
444 * @end_shift: shift right of the end addr reg
445 * @reg_ops: array of registers operations
447 * This parses IWL_UCODE_TLV_FW_DBG_DEST
449 struct iwl_fw_dbg_dest_tlv
{
455 __le32 write_ptr_reg
;
459 struct iwl_fw_dbg_reg_op reg_ops
[0];
462 struct iwl_fw_dbg_conf_hcmd
{
470 * enum iwl_fw_dbg_trigger_mode - triggers functionalities
472 * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
473 * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
475 enum iwl_fw_dbg_trigger_mode
{
476 IWL_FW_DBG_TRIGGER_START
= BIT(0),
477 IWL_FW_DBG_TRIGGER_STOP
= BIT(1),
481 * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
482 * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
483 * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
484 * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
485 * @IWL_FW_DBG_CONF_VIF_AP: AP mode
486 * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
487 * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
488 * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
490 enum iwl_fw_dbg_trigger_vif_type
{
491 IWL_FW_DBG_CONF_VIF_ANY
= NL80211_IFTYPE_UNSPECIFIED
,
492 IWL_FW_DBG_CONF_VIF_IBSS
= NL80211_IFTYPE_ADHOC
,
493 IWL_FW_DBG_CONF_VIF_STATION
= NL80211_IFTYPE_STATION
,
494 IWL_FW_DBG_CONF_VIF_AP
= NL80211_IFTYPE_AP
,
495 IWL_FW_DBG_CONF_VIF_P2P_CLIENT
= NL80211_IFTYPE_P2P_CLIENT
,
496 IWL_FW_DBG_CONF_VIF_P2P_GO
= NL80211_IFTYPE_P2P_GO
,
497 IWL_FW_DBG_CONF_VIF_P2P_DEVICE
= NL80211_IFTYPE_P2P_DEVICE
,
501 * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
502 * @id: %enum iwl_fw_dbg_trigger
503 * @vif_type: %enum iwl_fw_dbg_trigger_vif_type
504 * @stop_conf_ids: bitmap of configurations this trigger relates to.
505 * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
506 * to the currently running configuration is set, the data should be
508 * @stop_delay: how many milliseconds to wait before collecting the data
509 * after the STOP trigger fires.
510 * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both
511 * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
512 * configuration should be applied when the triggers kicks in.
513 * @occurrences: number of occurrences. 0 means the trigger will never fire.
515 struct iwl_fw_dbg_trigger_tlv
{
518 __le32 stop_conf_ids
;
528 #define FW_DBG_START_FROM_ALIVE 0
529 #define FW_DBG_CONF_MAX 32
530 #define FW_DBG_INVALID 0xff
533 * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
534 * @stop_consec_missed_bcon: stop recording if threshold is crossed.
535 * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
536 * @start_consec_missed_bcon: start recording if threshold is crossed.
537 * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
538 * @reserved1: reserved
539 * @reserved2: reserved
541 struct iwl_fw_dbg_trigger_missed_bcon
{
542 __le32 stop_consec_missed_bcon
;
543 __le32 stop_consec_missed_bcon_since_rx
;
545 __le32 start_consec_missed_bcon
;
546 __le32 start_consec_missed_bcon_since_rx
;
551 * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
552 * cmds: the list of commands to trigger the collection on
554 struct iwl_fw_dbg_trigger_cmd
{
562 * iwl_fw_dbg_trigger_stats - configures trigger for statistics
563 * @stop_offset: the offset of the value to be monitored
564 * @stop_threshold: the threshold above which to collect
565 * @start_offset: the offset of the value to be monitored
566 * @start_threshold: the threshold above which to start recording
568 struct iwl_fw_dbg_trigger_stats
{
570 __le32 stop_threshold
;
572 __le32 start_threshold
;
576 * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
577 * @rssi: RSSI value to trigger at
579 struct iwl_fw_dbg_trigger_low_rssi
{
584 * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
585 * @stop_auth_denied: number of denied authentication to collect
586 * @stop_auth_timeout: number of authentication timeout to collect
587 * @stop_rx_deauth: number of Rx deauth before to collect
588 * @stop_tx_deauth: number of Tx deauth before to collect
589 * @stop_assoc_denied: number of denied association to collect
590 * @stop_assoc_timeout: number of association timeout to collect
591 * @stop_connection_loss: number of connection loss to collect
592 * @start_auth_denied: number of denied authentication to start recording
593 * @start_auth_timeout: number of authentication timeout to start recording
594 * @start_rx_deauth: number of Rx deauth to start recording
595 * @start_tx_deauth: number of Tx deauth to start recording
596 * @start_assoc_denied: number of denied association to start recording
597 * @start_assoc_timeout: number of association timeout to start recording
598 * @start_connection_loss: number of connection loss to start recording
600 struct iwl_fw_dbg_trigger_mlme
{
602 u8 stop_auth_timeout
;
606 u8 stop_assoc_denied
;
607 u8 stop_assoc_timeout
;
608 u8 stop_connection_loss
;
611 u8 start_auth_denied
;
612 u8 start_auth_timeout
;
616 u8 start_assoc_denied
;
617 u8 start_assoc_timeout
;
618 u8 start_connection_loss
;
623 * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
624 * @command_queue: timeout for the command queue in ms
625 * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
626 * @softap: timeout for the queues of a softAP in ms
627 * @p2p_go: timeout for the queues of a P2P GO in ms
628 * @p2p_client: timeout for the queues of a P2P client in ms
629 * @p2p_device: timeout for the queues of a P2P device in ms
630 * @ibss: timeout for the queues of an IBSS in ms
631 * @tdls: timeout for the queues of a TDLS station in ms
633 struct iwl_fw_dbg_trigger_txq_timer
{
634 __le32 command_queue
;
646 * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
647 * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
648 * trigger each time a time event notification that relates to time event
649 * id with one of the actions in the bitmap is received and
650 * BIT(notif->status) is set in status_bitmap.
653 struct iwl_fw_dbg_trigger_time_event
{
656 __le32 action_bitmap
;
657 __le32 status_bitmap
;
658 } __packed time_events
[16];
662 * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
664 * @usniffer: should the uSniffer image be used
665 * @num_of_hcmds: how many HCMDs to send are present here
666 * @hcmd: a variable length host command to be sent to apply the configuration.
667 * If there is more than one HCMD to send, they will appear one after the
668 * other and be sent in the order that they appear in.
669 * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
670 * %FW_DBG_CONF_MAX configuration per run.
672 struct iwl_fw_dbg_conf_tlv
{
677 struct iwl_fw_dbg_conf_hcmd hcmd
;
680 #endif /* __iwl_fw_file_h__ */