drivers/tty/serial/Kconfig

   1 #
   2 # Serial device configuration
   3 #
   4
   5 if TTY
   6
   7 menu "Serial drivers"
   8         depends on HAS_IOMEM
   9
  10 config SERIAL_EARLYCON
  11         bool
  12         help
  13           Support for early consoles with the earlycon parameter. This enables
  14           the console before standard serial driver is probed. The console is
  15           enabled when early_param is processed.
  16
  17 source "drivers/tty/serial/8250/Kconfig"
  18
  19 comment "Non-8250 serial port support"
  20
  21 config SERIAL_AMBA_PL010
  22         tristate "ARM AMBA PL010 serial port support"
  23         depends on ARM_AMBA
  24         select SERIAL_CORE
  25         help
  26           This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
  27           an Integrator/AP or Integrator/PP2 platform, or if you have a
  28           Cirrus Logic EP93xx CPU, say Y or M here.
  29
  30           If unsure, say N.
  31
  32 config SERIAL_AMBA_PL010_CONSOLE
  33         bool "Support for console on AMBA serial port"
  34         depends on SERIAL_AMBA_PL010=y
  35         select SERIAL_CORE_CONSOLE
  36         ---help---
  37           Say Y here if you wish to use an AMBA PrimeCell UART as the system
  38           console (the system console is the device which receives all kernel
  39           messages and warnings and which allows logins in single user mode).
  40
  41           Even if you say Y here, the currently visible framebuffer console
  42           (/dev/tty0) will still be used as the system console by default, but
  43           you can alter that using a kernel command line option such as
  44           "console=ttyAM0". (Try "man bootparam" or see the documentation of
  45           your boot loader (lilo or loadlin) about how to pass options to the
  46           kernel at boot time.)
  47
  48 config SERIAL_AMBA_PL011
  49         tristate "ARM AMBA PL011 serial port support"
  50         depends on ARM_AMBA
  51         select SERIAL_CORE
  52         help
  53           This selects the ARM(R) AMBA(R) PrimeCell PL011 UART.  If you have
  54           an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
  55           here.
  56
  57           If unsure, say N.
  58
  59 config SERIAL_AMBA_PL011_CONSOLE
  60         bool "Support for console on AMBA serial port"
  61         depends on SERIAL_AMBA_PL011=y
  62         select SERIAL_CORE_CONSOLE
  63         select SERIAL_EARLYCON
  64         ---help---
  65           Say Y here if you wish to use an AMBA PrimeCell UART as the system
  66           console (the system console is the device which receives all kernel
  67           messages and warnings and which allows logins in single user mode).
  68
  69           Even if you say Y here, the currently visible framebuffer console
  70           (/dev/tty0) will still be used as the system console by default, but
  71           you can alter that using a kernel command line option such as
  72           "console=ttyAMA0". (Try "man bootparam" or see the documentation of
  73           your boot loader (lilo or loadlin) about how to pass options to the
  74           kernel at boot time.)
  75
  76 config SERIAL_EARLYCON_ARM_SEMIHOST
  77         bool "Early console using ARM semihosting"
  78         depends on ARM64 || ARM
  79         select SERIAL_CORE
  80         select SERIAL_CORE_CONSOLE
  81         select SERIAL_EARLYCON
  82         help
  83           Support for early debug console using ARM semihosting. This enables
  84           the console before standard serial driver is probed. This is enabled
  85           with "earlycon=smh" on the kernel command line. The console is
  86           enabled when early_param is processed.
  87
  88 config SERIAL_SB1250_DUART
  89         tristate "BCM1xxx on-chip DUART serial support"
  90         depends on SIBYTE_SB1xxx_SOC=y
  91         select SERIAL_CORE
  92         default y
  93         ---help---
  94           Support for the asynchronous serial interface (DUART) included in
  95           the BCM1250 and derived System-On-a-Chip (SOC) devices.  Note that
  96           the letter D in DUART stands for "dual", which is how the device
  97           is implemented.  Depending on the SOC configuration there may be
  98           one or more DUARTs available of which all are handled.
  99
 100           If unsure, say Y.  To compile this driver as a module, choose M here:
 101           the module will be called sb1250-duart.
 102
 103 config SERIAL_SB1250_DUART_CONSOLE
 104         bool "Support for console on a BCM1xxx DUART serial port"
 105         depends on SERIAL_SB1250_DUART=y
 106         select SERIAL_CORE_CONSOLE
 107         default y
 108         ---help---
 109           If you say Y here, it will be possible to use a serial port as the
 110           system console (the system console is the device which receives all
 111           kernel messages and warnings and which allows logins in single user
 112           mode).
 113
 114           If unsure, say Y.
 115
 116 config SERIAL_ATMEL
 117         bool "AT91 / AT32 on-chip serial port support"
 118         depends on HAS_DMA
 119         depends on ARCH_AT91 || AVR32 || COMPILE_TEST
 120         select SERIAL_CORE
 121         select SERIAL_MCTRL_GPIO if GPIOLIB
 122         help
 123           This enables the driver for the on-chip UARTs of the Atmel
 124           AT91 and AT32 processors.
 125
 126 config SERIAL_ATMEL_CONSOLE
 127         bool "Support for console on AT91 / AT32 serial port"
 128         depends on SERIAL_ATMEL=y
 129         select SERIAL_CORE_CONSOLE
 130         help
 131           Say Y here if you wish to use an on-chip UART on a Atmel
 132           AT91 or AT32 processor as the system console (the system
 133           console is the device which receives all kernel messages and
 134           warnings and which allows logins in single user mode).
 135
 136 config SERIAL_ATMEL_PDC
 137         bool "Support DMA transfers on AT91 / AT32 serial port"
 138         depends on SERIAL_ATMEL
 139         default y
 140         help
 141           Say Y here if you wish to use the PDC to do DMA transfers to
 142           and from the Atmel AT91 / AT32 serial port. In order to
 143           actually use DMA transfers, make sure that the use_dma_tx
 144           and use_dma_rx members in the atmel_uart_data struct is set
 145           appropriately for each port.
 146
 147           Note that break and error handling currently doesn't work
 148           properly when DMA is enabled. Make sure that ports where
 149           this matters don't use DMA.
 150
 151 config SERIAL_ATMEL_TTYAT
 152         bool "Install as device ttyATn instead of ttySn"
 153         depends on SERIAL_ATMEL=y
 154         help
 155           Say Y here if you wish to have the internal AT91 / AT32 UARTs
 156           appear as /dev/ttyATn (major 204, minor starting at 154)
 157           instead of the normal /dev/ttySn (major 4, minor starting at
 158           64). This is necessary if you also want other UARTs, such as
 159           external 8250/16C550 compatible UARTs.
 160           The ttySn nodes are legally reserved for the 8250 serial driver
 161           but are often misused by other serial drivers.
 162
 163           To use this, you should create suitable ttyATn device nodes in
 164           /dev/, and pass "console=ttyATn" to the kernel.
 165
 166           Say Y if you have an external 8250/16C550 UART.  If unsure, say N.
 167
 168 config SERIAL_KGDB_NMI
 169         bool "Serial console over KGDB NMI debugger port"
 170         depends on KGDB_SERIAL_CONSOLE
 171         help
 172           This special driver allows you to temporary use NMI debugger port
 173           as a normal console (assuming that the port is attached to KGDB).
 174
 175           Unlike KDB's disable_nmi command, with this driver you are always
 176           able to go back to the debugger using KGDB escape sequence ($3#33).
 177           This is because this console driver processes the input in NMI
 178           context, and thus is able to intercept the magic sequence.
 179
 180           Note that since the console interprets input and uses polling
 181           communication methods, for things like PPP you still must fully
 182           detach debugger port from the KGDB NMI (i.e. disable_nmi), and
 183           use raw console.
 184
 185           If unsure, say N.
 186
 187 config SERIAL_KS8695
 188         bool "Micrel KS8695 (Centaur) serial port support"
 189         depends on ARCH_KS8695
 190         select SERIAL_CORE
 191         help
 192           This selects the Micrel Centaur KS8695 UART.  Say Y here.
 193
 194 config SERIAL_KS8695_CONSOLE
 195         bool "Support for console on KS8695 (Centaur) serial port"
 196         depends on SERIAL_KS8695=y
 197         select SERIAL_CORE_CONSOLE
 198         help
 199           Say Y here if you wish to use a KS8695 (Centaur) UART as the
 200           system console (the system console is the device which
 201           receives all kernel messages and warnings and which allows
 202           logins in single user mode).
 203
 204 config SERIAL_MESON
 205         tristate "Meson serial port support"
 206         depends on ARCH_MESON
 207         select SERIAL_CORE
 208         help
 209           This enables the driver for the on-chip UARTs of the Amlogic
 210           MesonX processors.
 211
 212 config SERIAL_MESON_CONSOLE
 213         bool "Support for console on meson"
 214         depends on SERIAL_MESON=y
 215         select SERIAL_CORE_CONSOLE
 216         help
 217           Say Y here if you wish to use a Amlogic MesonX UART as the
 218           system console (the system console is the device which
 219           receives all kernel messages and warnings and which allows
 220           logins in single user mode) as /dev/ttyAMLx.
 221
 222 config SERIAL_CLPS711X
 223         tristate "CLPS711X serial port support"
 224         depends on ARCH_CLPS711X || COMPILE_TEST
 225         select SERIAL_CORE
 226         select SERIAL_MCTRL_GPIO if GPIOLIB
 227         help
 228           This enables the driver for the on-chip UARTs of the Cirrus
 229           Logic EP711x/EP721x/EP731x processors.
 230
 231 config SERIAL_CLPS711X_CONSOLE
 232         bool "Support for console on CLPS711X serial port"
 233         depends on SERIAL_CLPS711X=y
 234         select SERIAL_CORE_CONSOLE
 235         help
 236           Even if you say Y here, the currently visible virtual console
 237           (/dev/tty0) will still be used as the system console by default, but
 238           you can alter that using a kernel command line option such as
 239           "console=ttyCL1".
 240
 241 config SERIAL_SAMSUNG
 242         tristate "Samsung SoC serial support"
 243         depends on PLAT_SAMSUNG || ARCH_EXYNOS
 244         select SERIAL_CORE
 245         help
 246           Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 247           providing /dev/ttySAC0, 1 and 2 (note, some machines may not
 248           provide all of these ports, depending on how the serial port
 249           pins are configured.
 250
 251 config SERIAL_SAMSUNG_UARTS_4
 252         bool
 253         depends on SERIAL_SAMSUNG
 254         default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
 255         help
 256           Internal node for the common case of 4 Samsung compatible UARTs
 257
 258 config SERIAL_SAMSUNG_UARTS
 259         int
 260         depends on SERIAL_SAMSUNG
 261         default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
 262         default 3
 263         help
 264           Select the number of available UART ports for the Samsung S3C
 265           serial driver
 266
 267 config SERIAL_SAMSUNG_DEBUG
 268         bool "Samsung SoC serial debug"
 269         depends on SERIAL_SAMSUNG && DEBUG_LL
 270         help
 271           Add support for debugging the serial driver. Since this is
 272           generally being used as a console, we use our own output
 273           routines that go via the low-level debug printascii()
 274           function.
 275
 276 config SERIAL_SAMSUNG_CONSOLE
 277         bool "Support for console on Samsung SoC serial port"
 278         depends on SERIAL_SAMSUNG=y
 279         select SERIAL_CORE_CONSOLE
 280         select SERIAL_EARLYCON
 281         help
 282           Allow selection of the S3C24XX on-board serial ports for use as
 283           an virtual console.
 284
 285           Even if you say Y here, the currently visible virtual console
 286           (/dev/tty0) will still be used as the system console by default, but
 287           you can alter that using a kernel command line option such as
 288           "console=ttySACx". (Try "man bootparam" or see the documentation of
 289           your boot loader about how to pass options to the kernel at
 290           boot time.)
 291
 292 config SERIAL_SIRFSOC
 293         tristate "SiRF SoC Platform Serial port support"
 294         depends on ARCH_SIRF
 295         select SERIAL_CORE
 296         help
 297           Support for the on-chip UART on the CSR SiRFprimaII series,
 298           providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
 299           provide all of these ports, depending on how the serial port
 300           pins are configured).
 301
 302 config SERIAL_SIRFSOC_CONSOLE
 303         bool "Support for console on SiRF SoC serial port"
 304         depends on SERIAL_SIRFSOC=y
 305         select SERIAL_CORE_CONSOLE
 306         help
 307           Even if you say Y here, the currently visible virtual console
 308           (/dev/tty0) will still be used as the system console by default, but
 309           you can alter that using a kernel command line option such as
 310           "console=ttySiRFx". (Try "man bootparam" or see the documentation of
 311           your boot loader about how to pass options to the kernel at
 312           boot time.)
 313
 314 config SERIAL_TEGRA
 315         tristate "NVIDIA Tegra20/30 SoC serial controller"
 316         depends on ARCH_TEGRA && TEGRA20_APB_DMA
 317         select SERIAL_CORE
 318         help
 319           Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
 320           providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
 321           provide all of these ports, depending on how the serial port
 322           are enabled). This driver uses the APB DMA to achieve higher baudrate
 323           and better performance.
 324
 325 config SERIAL_MAX3100
 326         tristate "MAX3100 support"
 327         depends on SPI
 328         select SERIAL_CORE
 329         help
 330           MAX3100 chip support
 331
 332 config SERIAL_MAX310X
 333         tristate "MAX310X support"
 334         depends on SPI_MASTER
 335         select SERIAL_CORE
 336         select REGMAP_SPI if SPI_MASTER
 337         default n
 338         help
 339           This selects support for an advanced UART from Maxim (Dallas).
 340           Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
 341           Each IC contains 128 words each of receive and transmit FIFO
 342           that can be controlled through I2C or high-speed SPI.
 343
 344           Say Y here if you want to support this ICs.
 345
 346 config SERIAL_DZ
 347         bool "DECstation DZ serial driver"
 348         depends on MACH_DECSTATION && 32BIT
 349         select SERIAL_CORE
 350         default y
 351         ---help---
 352           DZ11-family serial controllers for DECstations and VAXstations,
 353           including the DC7085, M7814, and M7819.
 354
 355 config SERIAL_DZ_CONSOLE
 356         bool "Support console on DECstation DZ serial driver"
 357         depends on SERIAL_DZ=y
 358         select SERIAL_CORE_CONSOLE
 359         default y
 360         ---help---
 361           If you say Y here, it will be possible to use a serial port as the
 362           system console (the system console is the device which receives all
 363           kernel messages and warnings and which allows logins in single user
 364           mode).
 365
 366           Note that the firmware uses ttyS3 as the serial console on
 367           DECstations that use this driver.
 368
 369           If unsure, say Y.
 370
 371 config SERIAL_ZS
 372         tristate "DECstation Z85C30 serial support"
 373         depends on MACH_DECSTATION
 374         select SERIAL_CORE
 375         default y
 376         ---help---
 377           Support for the Zilog 85C350 serial communications controller used
 378           for serial ports in newer DECstation systems.  These include the
 379           DECsystem 5900 and all models of the DECstation and DECsystem 5000
 380           systems except from model 200.
 381
 382           If unsure, say Y.  To compile this driver as a module, choose M here:
 383           the module will be called zs.
 384
 385 config SERIAL_ZS_CONSOLE
 386         bool "Support for console on a DECstation Z85C30 serial port"
 387         depends on SERIAL_ZS=y
 388         select SERIAL_CORE_CONSOLE
 389         default y
 390         ---help---
 391           If you say Y here, it will be possible to use a serial port as the
 392           system console (the system console is the device which receives all
 393           kernel messages and warnings and which allows logins in single user
 394           mode).
 395
 396           Note that the firmware uses ttyS1 as the serial console on the
 397           Maxine and ttyS3 on the others using this driver.
 398
 399           If unsure, say Y.
 400
 401 config SERIAL_21285
 402         tristate "DC21285 serial port support"
 403         depends on FOOTBRIDGE
 404         select SERIAL_CORE
 405         help
 406           If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
 407           PCI bridge you can enable its onboard serial port by enabling this
 408           option.
 409
 410 config SERIAL_21285_CONSOLE
 411         bool "Console on DC21285 serial port"
 412         depends on SERIAL_21285=y
 413         select SERIAL_CORE_CONSOLE
 414         help
 415           If you have enabled the serial port on the 21285 footbridge you can
 416           make it the console by answering Y to this option.
 417
 418           Even if you say Y here, the currently visible virtual console
 419           (/dev/tty0) will still be used as the system console by default, but
 420           you can alter that using a kernel command line option such as
 421           "console=ttyFB". (Try "man bootparam" or see the documentation of
 422           your boot loader (lilo or loadlin) about how to pass options to the
 423           kernel at boot time.)
 424
 425 config SERIAL_MPSC
 426         bool "Marvell MPSC serial port support"
 427         depends on MV64X60
 428         select SERIAL_CORE
 429         help
 430           Say Y here if you want to use the Marvell MPSC serial controller.
 431
 432 config SERIAL_MPSC_CONSOLE
 433         bool "Support for console on Marvell MPSC serial port"
 434         depends on SERIAL_MPSC
 435         select SERIAL_CORE_CONSOLE
 436         help
 437           Say Y here if you want to support a serial console on a Marvell MPSC.
 438
 439 config SERIAL_PXA
 440         bool "PXA serial port support"
 441         depends on ARCH_PXA || ARCH_MMP
 442         select SERIAL_CORE
 443         help
 444           If you have a machine based on an Intel XScale PXA2xx CPU you
 445           can enable its onboard serial ports by enabling this option.
 446
 447 config SERIAL_PXA_CONSOLE
 448         bool "Console on PXA serial port"
 449         depends on SERIAL_PXA
 450         select SERIAL_CORE_CONSOLE
 451         help
 452           If you have enabled the serial port on the Intel XScale PXA
 453           CPU you can make it the console by answering Y to this option.
 454
 455           Even if you say Y here, the currently visible virtual console
 456           (/dev/tty0) will still be used as the system console by default, but
 457           you can alter that using a kernel command line option such as
 458           "console=ttySA0". (Try "man bootparam" or see the documentation of
 459           your boot loader (lilo or loadlin) about how to pass options to the
 460           kernel at boot time.)
 461
 462 config SERIAL_SA1100
 463         bool "SA1100 serial port support"
 464         depends on ARCH_SA1100
 465         select SERIAL_CORE
 466         help
 467           If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
 468           can enable its onboard serial port by enabling this option.
 469           Please read <file:Documentation/arm/SA1100/serial_UART> for further
 470           info.
 471
 472 config SERIAL_SA1100_CONSOLE
 473         bool "Console on SA1100 serial port"
 474         depends on SERIAL_SA1100
 475         select SERIAL_CORE_CONSOLE
 476         help
 477           If you have enabled the serial port on the SA1100/SA1110 StrongARM
 478           CPU you can make it the console by answering Y to this option.
 479
 480           Even if you say Y here, the currently visible virtual console
 481           (/dev/tty0) will still be used as the system console by default, but
 482           you can alter that using a kernel command line option such as
 483           "console=ttySA0". (Try "man bootparam" or see the documentation of
 484           your boot loader (lilo or loadlin) about how to pass options to the
 485           kernel at boot time.)
 486
 487 config SERIAL_BFIN
 488         tristate "Blackfin serial port support"
 489         depends on BLACKFIN
 490         select SERIAL_CORE
 491         select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
 492         help
 493           Add support for the built-in UARTs on the Blackfin.
 494
 495           To compile this driver as a module, choose M here: the
 496           module is named bfin_uart.ko.
 497
 498 config SERIAL_BFIN_CONSOLE
 499         bool "Console on Blackfin serial port"
 500         depends on SERIAL_BFIN=y
 501         select SERIAL_CORE_CONSOLE
 502
 503 choice
 504         prompt "UART Mode"
 505         depends on SERIAL_BFIN
 506         default SERIAL_BFIN_DMA
 507         help
 508           This driver supports the built-in serial ports of the Blackfin family
 509           of CPUs
 510
 511 config SERIAL_BFIN_DMA
 512         bool "DMA mode"
 513         depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
 514         help
 515           This driver works under DMA mode. If this option is selected, the
 516           blackfin simple dma driver is also enabled.
 517
 518 config SERIAL_BFIN_PIO
 519         bool "PIO mode"
 520         help
 521           This driver works under PIO mode.
 522
 523 endchoice
 524
 525 config SERIAL_BFIN_UART0
 526         bool "Enable UART0"
 527         depends on SERIAL_BFIN
 528         help
 529           Enable UART0
 530
 531 config BFIN_UART0_CTSRTS
 532         bool "Enable UART0 hardware flow control"
 533         depends on SERIAL_BFIN_UART0
 534         help
 535           Enable hardware flow control in the driver.
 536
 537 config SERIAL_BFIN_UART1
 538         bool "Enable UART1"
 539         depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
 540         help
 541           Enable UART1
 542
 543 config BFIN_UART1_CTSRTS
 544         bool "Enable UART1 hardware flow control"
 545         depends on SERIAL_BFIN_UART1
 546         help
 547           Enable hardware flow control in the driver.
 548
 549 config SERIAL_BFIN_UART2
 550         bool "Enable UART2"
 551         depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
 552         help
 553           Enable UART2
 554
 555 config BFIN_UART2_CTSRTS
 556         bool "Enable UART2 hardware flow control"
 557         depends on SERIAL_BFIN_UART2
 558         help
 559           Enable hardware flow control in the driver.
 560
 561 config SERIAL_BFIN_UART3
 562         bool "Enable UART3"
 563         depends on SERIAL_BFIN && (BF54x)
 564         help
 565           Enable UART3
 566
 567 config BFIN_UART3_CTSRTS
 568         bool "Enable UART3 hardware flow control"
 569         depends on SERIAL_BFIN_UART3
 570         help
 571           Enable hardware flow control in the driver.
 572
 573 config SERIAL_IMX
 574         tristate "IMX serial port support"
 575         depends on HAS_DMA
 576         depends on ARCH_MXC || COMPILE_TEST
 577         select SERIAL_CORE
 578         select RATIONAL
 579         select SERIAL_MCTRL_GPIO if GPIOLIB
 580         help
 581           If you have a machine based on a Motorola IMX CPU you
 582           can enable its onboard serial port by enabling this option.
 583
 584 config SERIAL_IMX_CONSOLE
 585         bool "Console on IMX serial port"
 586         depends on SERIAL_IMX=y
 587         select SERIAL_CORE_CONSOLE
 588         select SERIAL_EARLYCON if OF
 589         help
 590           If you have enabled the serial port on the Freescale IMX
 591           CPU you can make it the console by answering Y to this option.
 592
 593           Even if you say Y here, the currently visible virtual console
 594           (/dev/tty0) will still be used as the system console by default, but
 595           you can alter that using a kernel command line option such as
 596           "console=ttymxc0". (Try "man bootparam" or see the documentation of
 597           your bootloader about how to pass options to the kernel at boot time.)
 598
 599 config SERIAL_UARTLITE
 600         tristate "Xilinx uartlite serial port support"
 601         depends on HAS_IOMEM
 602         select SERIAL_CORE
 603         help
 604           Say Y here if you want to use the Xilinx uartlite serial controller.
 605
 606           To compile this driver as a module, choose M here: the
 607           module will be called uartlite.
 608
 609 config SERIAL_UARTLITE_CONSOLE
 610         bool "Support for console on Xilinx uartlite serial port"
 611         depends on SERIAL_UARTLITE=y
 612         select SERIAL_CORE_CONSOLE
 613         select SERIAL_EARLYCON
 614         help
 615           Say Y here if you wish to use a Xilinx uartlite as the system
 616           console (the system console is the device which receives all kernel
 617           messages and warnings and which allows logins in single user mode).
 618
 619 config SERIAL_SUNCORE
 620         bool
 621         depends on SPARC
 622         select SERIAL_CORE
 623         select SERIAL_CORE_CONSOLE
 624         default y
 625
 626 config SERIAL_SUNZILOG
 627         tristate "Sun Zilog8530 serial support"
 628         depends on SPARC
 629         help
 630           This driver supports the Zilog8530 serial ports found on many Sparc
 631           systems.  Say Y or M if you want to be able to these serial ports.
 632
 633 config SERIAL_SUNZILOG_CONSOLE
 634         bool "Console on Sun Zilog8530 serial port"
 635         depends on SERIAL_SUNZILOG=y
 636         help
 637           If you would like to be able to use the Zilog8530 serial port
 638           on your Sparc system as the console, you can do so by answering
 639           Y to this option.
 640
 641 config SERIAL_SUNSU
 642         tristate "Sun SU serial support"
 643         depends on SPARC && PCI
 644         help
 645           This driver supports the 8250 serial ports that run the keyboard and
 646           mouse on (PCI) UltraSPARC systems.  Say Y or M if you want to be able
 647           to these serial ports.
 648
 649 config SERIAL_SUNSU_CONSOLE
 650         bool "Console on Sun SU serial port"
 651         depends on SERIAL_SUNSU=y
 652         help
 653           If you would like to be able to use the SU serial port
 654           on your Sparc system as the console, you can do so by answering
 655           Y to this option.
 656
 657 config SERIAL_MUX
 658         tristate "Serial MUX support"
 659         depends on GSC
 660         select SERIAL_CORE
 661         default y
 662         ---help---
 663           Saying Y here will enable the hardware MUX serial driver for
 664           the Nova, K class systems and D class with a 'remote control card'.
 665           The hardware MUX is not 8250/16550 compatible therefore the
 666           /dev/ttyB0 device is shared between the Serial MUX and the PDC
 667           software console. The following steps need to be completed to use
 668           the Serial MUX:
 669
 670             1. create the device entry (mknod /dev/ttyB0 c 11 0)
 671             2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
 672             3. Add device ttyB0 to /etc/securetty (if you want to log on as
 673                  root on this console.)
 674             4. Change the kernel command console parameter to: console=ttyB0
 675
 676 config SERIAL_MUX_CONSOLE
 677         bool "Support for console on serial MUX"
 678         depends on SERIAL_MUX=y
 679         select SERIAL_CORE_CONSOLE
 680         default y
 681
 682 config PDC_CONSOLE
 683         bool "PDC software console support"
 684         depends on PARISC && !SERIAL_MUX && VT
 685         default n
 686         help
 687           Saying Y here will enable the software based PDC console to be
 688           used as the system console.  This is useful for machines in
 689           which the hardware based console has not been written yet.  The
 690           following steps must be completed to use the PDC console:
 691
 692             1. create the device entry (mknod /dev/ttyB0 c 11 0)
 693             2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
 694             3. Add device ttyB0 to /etc/securetty (if you want to log on as
 695                  root on this console.)
 696             4. Change the kernel command console parameter to: console=ttyB0
 697
 698 config SERIAL_SUNSAB
 699         tristate "Sun Siemens SAB82532 serial support"
 700         depends on SPARC && PCI
 701         help
 702           This driver supports the Siemens SAB82532 DUSCC serial ports on newer
 703           (PCI) UltraSPARC systems.  Say Y or M if you want to be able to these
 704           serial ports.
 705
 706 config SERIAL_SUNSAB_CONSOLE
 707         bool "Console on Sun Siemens SAB82532 serial port"
 708         depends on SERIAL_SUNSAB=y
 709         help
 710           If you would like to be able to use the SAB82532 serial port
 711           on your Sparc system as the console, you can do so by answering
 712           Y to this option.
 713
 714 config SERIAL_SUNHV
 715         bool "Sun4v Hypervisor Console support"
 716         depends on SPARC64
 717         help
 718           This driver supports the console device found on SUN4V Sparc
 719           systems.  Say Y if you want to be able to use this device.
 720
 721 config SERIAL_IP22_ZILOG
 722         tristate "SGI Zilog8530 serial support"
 723         depends on SGI_HAS_ZILOG
 724         select SERIAL_CORE
 725         help
 726           This driver supports the Zilog8530 serial ports found on SGI
 727           systems.  Say Y or M if you want to be able to these serial ports.
 728
 729 config SERIAL_IP22_ZILOG_CONSOLE
 730         bool "Console on SGI Zilog8530 serial port"
 731         depends on SERIAL_IP22_ZILOG=y
 732         select SERIAL_CORE_CONSOLE
 733
 734 config SERIAL_SH_SCI
 735         tristate "SuperH SCI(F) serial port support"
 736         depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST
 737         select SERIAL_CORE
 738
 739 config SERIAL_SH_SCI_NR_UARTS
 740         int "Maximum number of SCI(F) serial ports"
 741         depends on SERIAL_SH_SCI
 742         default "2"
 743
 744 config SERIAL_SH_SCI_CONSOLE
 745         bool "Support for console on SuperH SCI(F)"
 746         depends on SERIAL_SH_SCI=y
 747         select SERIAL_CORE_CONSOLE
 748
 749 config SERIAL_SH_SCI_EARLYCON
 750         bool "Support for early console on SuperH SCI(F)"
 751         depends on SERIAL_SH_SCI=y
 752         select SERIAL_CORE_CONSOLE
 753         select SERIAL_EARLYCON
 754
 755 config SERIAL_SH_SCI_DMA
 756         bool "DMA support"
 757         depends on SERIAL_SH_SCI && DMA_ENGINE
 758
 759 config SERIAL_PNX8XXX
 760         bool "Enable PNX8XXX SoCs' UART Support"
 761         depends on SOC_PNX833X
 762         select SERIAL_CORE
 763         help
 764           If you have a MIPS-based Philips SoC such as PNX8330 and you want
 765           to use serial ports, say Y.  Otherwise, say N.
 766
 767 config SERIAL_PNX8XXX_CONSOLE
 768         bool "Enable PNX8XX0 serial console"
 769         depends on SERIAL_PNX8XXX
 770         select SERIAL_CORE_CONSOLE
 771         help
 772           If you have a MIPS-based Philips SoC such as PNX8330 and you want
 773           to use serial console, say Y. Otherwise, say N.
 774
 775 config SERIAL_HS_LPC32XX
 776         tristate "LPC32XX high speed serial port support"
 777         depends on ARCH_LPC32XX && OF
 778         select SERIAL_CORE
 779         help
 780           Support for the LPC32XX high speed serial ports (up to 900kbps).
 781           Those are UARTs completely different from the Standard UARTs on the
 782           LPC32XX SoC.
 783           Choose M or Y here to build this driver.
 784
 785 config SERIAL_HS_LPC32XX_CONSOLE
 786         bool "Enable LPC32XX high speed UART serial console"
 787         depends on SERIAL_HS_LPC32XX=y
 788         select SERIAL_CORE_CONSOLE
 789         help
 790           If you would like to be able to use one of the high speed serial
 791           ports on the LPC32XX as the console, you can do so by answering
 792           Y to this option.
 793
 794 config SERIAL_CORE
 795         tristate
 796
 797 config SERIAL_CORE_CONSOLE
 798         bool
 799
 800 config CONSOLE_POLL
 801         bool
 802
 803 config SERIAL_MCF
 804         bool "Coldfire serial support"
 805         depends on COLDFIRE
 806         select SERIAL_CORE
 807         help
 808           This serial driver supports the Freescale Coldfire serial ports.
 809
 810 config SERIAL_MCF_BAUDRATE
 811         int "Default baudrate for Coldfire serial ports"
 812         depends on SERIAL_MCF
 813         default 19200
 814         help
 815           This setting lets you define what the default baudrate is for the
 816           ColdFire serial ports. The usual default varies from board to board,
 817           and this setting is a way of catering for that.
 818
 819 config SERIAL_MCF_CONSOLE
 820         bool "Coldfire serial console support"
 821         depends on SERIAL_MCF
 822         select SERIAL_CORE_CONSOLE
 823         help
 824           Enable a ColdFire internal serial port to be the system console.
 825
 826 config SERIAL_PMACZILOG
 827         tristate "Mac or PowerMac z85c30 ESCC support"
 828         depends on (M68K && MAC) || PPC_PMAC
 829         select SERIAL_CORE
 830         help
 831           This driver supports the Zilog z85C30 serial ports found on
 832           (Power)Mac machines.
 833           Say Y or M if you want to be able to these serial ports.
 834
 835 config SERIAL_PMACZILOG_TTYS
 836         bool "Use ttySn device nodes for Zilog z85c30"
 837         depends on SERIAL_PMACZILOG
 838         help
 839           The pmac_zilog driver for the z85C30 chip on many powermacs
 840           historically used the device numbers for /dev/ttySn.  The
 841           8250 serial port driver also uses these numbers, which means
 842           the two drivers being unable to coexist; you could not use
 843           both z85C30 and 8250 type ports at the same time.
 844
 845           If this option is not selected, the pmac_zilog driver will
 846           use the device numbers allocated for /dev/ttyPZn.  This allows
 847           the pmac_zilog and 8250 drivers to co-exist, but may cause
 848           existing userspace setups to break.  Programs that need to
 849           access the built-in serial ports on powermacs will need to
 850           be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
 851
 852           If you enable this option, any z85c30 ports in the system will
 853           be registered as ttyS0 onwards as in the past, and you will be
 854           unable to use the 8250 module for PCMCIA or other 16C550-style
 855           UARTs.
 856
 857           Say N unless you need the z85c30 ports on your (Power)Mac
 858           to appear as /dev/ttySn.
 859
 860 config SERIAL_PMACZILOG_CONSOLE
 861         bool "Console on Mac or PowerMac z85c30 serial port"
 862         depends on SERIAL_PMACZILOG=y
 863         select SERIAL_CORE_CONSOLE
 864         help
 865           If you would like to be able to use the z85c30 serial port
 866           on your (Power)Mac as the console, you can do so by answering
 867           Y to this option.
 868
 869 config SERIAL_CPM
 870         tristate "CPM SCC/SMC serial port support"
 871         depends on CPM2 || CPM1
 872         select SERIAL_CORE
 873         help
 874           This driver supports the SCC and SMC serial ports on Motorola
 875           embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
 876
 877 config SERIAL_CPM_CONSOLE
 878         bool "Support for console on CPM SCC/SMC serial port"
 879         depends on SERIAL_CPM=y
 880         select SERIAL_CORE_CONSOLE
 881         help
 882           Say Y here if you wish to use a SCC or SMC CPM UART as the system
 883           console (the system console is the device which receives all kernel
 884           messages and warnings and which allows logins in single user mode).
 885
 886           Even if you say Y here, the currently visible framebuffer console
 887           (/dev/tty0) will still be used as the system console by default, but
 888           you can alter that using a kernel command line option such as
 889           "console=ttyCPM0". (Try "man bootparam" or see the documentation of
 890           your boot loader (lilo or loadlin) about how to pass options to the
 891           kernel at boot time.)
 892
 893 config SERIAL_SGI_L1_CONSOLE
 894         bool "SGI Altix L1 serial console support"
 895         depends on IA64_GENERIC || IA64_SGI_SN2
 896         select SERIAL_CORE
 897         select SERIAL_CORE_CONSOLE
 898         help
 899                 If you have an SGI Altix and you would like to use the system
 900                 controller serial port as your console (you want this!),
 901                 say Y.  Otherwise, say N.
 902
 903 config SERIAL_MPC52xx
 904         tristate "Freescale MPC52xx/MPC512x family PSC serial support"
 905         depends on PPC_MPC52xx || PPC_MPC512x
 906         select SERIAL_CORE
 907         help
 908           This driver supports MPC52xx and MPC512x PSC serial ports. If you would
 909           like to use them, you must answer Y or M to this option. Note that
 910           for use as console, it must be included in kernel and not as a
 911           module.
 912
 913 config SERIAL_MPC52xx_CONSOLE
 914         bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
 915         depends on SERIAL_MPC52xx=y
 916         select SERIAL_CORE_CONSOLE
 917         help
 918           Select this options if you'd like to use one of the PSC serial port
 919           of the Freescale MPC52xx family as a console.
 920
 921 config SERIAL_MPC52xx_CONSOLE_BAUD
 922         int "Freescale MPC52xx/MPC512x family PSC serial port baud"
 923         depends on SERIAL_MPC52xx_CONSOLE=y
 924         default "9600"
 925         help
 926           Select the MPC52xx console baud rate.
 927           This value is only used if the bootloader doesn't pass in the
 928           console baudrate
 929
 930 config SERIAL_ICOM
 931         tristate "IBM Multiport Serial Adapter"
 932         depends on PCI && PPC_PSERIES
 933         select SERIAL_CORE
 934         select FW_LOADER
 935         help
 936           This driver is for a family of multiport serial adapters
 937           including 2 port RVX, 2 port internal modem, 4 port internal
 938           modem and a split 1 port RVX and 1 port internal modem.
 939
 940           This driver can also be built as a module.  If so, the module
 941           will be called icom.
 942
 943 config SERIAL_M32R_SIO
 944         bool "M32R SIO I/F"
 945         depends on M32R
 946         default y
 947         select SERIAL_CORE
 948         help
 949           Say Y here if you want to use the M32R serial controller.
 950
 951 config SERIAL_M32R_SIO_CONSOLE
 952         bool "use SIO console"
 953         depends on SERIAL_M32R_SIO=y
 954         select SERIAL_CORE_CONSOLE
 955         help
 956           Say Y here if you want to support a serial console.
 957
 958           If you use an M3T-M32700UT or an OPSPUT platform,
 959           please say also y for SERIAL_M32R_PLDSIO.
 960
 961 config SERIAL_M32R_PLDSIO
 962         bool "M32R SIO I/F on a PLD"
 963         depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
 964         default n
 965         help
 966           Say Y here if you want to use the M32R serial controller
 967           on a PLD (Programmable Logic Device).
 968
 969           If you use an M3T-M32700UT or an OPSPUT platform,
 970           please say Y.
 971
 972 config SERIAL_TXX9
 973         bool "TMPTX39XX/49XX SIO support"
 974         depends on HAS_TXX9_SERIAL
 975         select SERIAL_CORE
 976         default y
 977
 978 config HAS_TXX9_SERIAL
 979         bool
 980
 981 config SERIAL_TXX9_NR_UARTS
 982         int "Maximum number of TMPTX39XX/49XX SIO ports"
 983         depends on SERIAL_TXX9
 984         default "6"
 985
 986 config SERIAL_TXX9_CONSOLE
 987         bool "TMPTX39XX/49XX SIO Console support"
 988         depends on SERIAL_TXX9=y
 989         select SERIAL_CORE_CONSOLE
 990
 991 config SERIAL_TXX9_STDSERIAL
 992         bool "TX39XX/49XX SIO act as standard serial"
 993         depends on !SERIAL_8250 && SERIAL_TXX9
 994
 995 config SERIAL_VR41XX
 996         tristate "NEC VR4100 series Serial Interface Unit support"
 997         depends on CPU_VR41XX
 998         select SERIAL_CORE
 999         help
1000           If you have a NEC VR4100 series processor and you want to use
1001           Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
1002           (not include VR4111/VR4121 DSIU), say Y.  Otherwise, say N.
1003
1004 config SERIAL_VR41XX_CONSOLE
1005         bool "Enable NEC VR4100 series Serial Interface Unit console"
1006         depends on SERIAL_VR41XX=y
1007         select SERIAL_CORE_CONSOLE
1008         help
1009           If you have a NEC VR4100 series processor and you want to use
1010           a console on a serial port, say Y.  Otherwise, say N.
1011
1012 config SERIAL_JSM
1013         tristate "Digi International NEO and Classic PCI Support"
1014         depends on PCI
1015         select SERIAL_CORE
1016         help
1017           This is a driver for Digi International's Neo and Classic series
1018           of cards which provide multiple serial ports. You would need
1019           something like this to connect more than two modems to your Linux
1020           box, for instance in order to become a dial-in server. This driver
1021           supports PCI boards only.
1022
1023           If you have a card like this, say Y here, otherwise say N.
1024
1025           To compile this driver as a module, choose M here: the
1026           module will be called jsm.
1027
1028 config SERIAL_SGI_IOC4
1029         tristate "SGI IOC4 controller serial support"
1030         depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1031         select SERIAL_CORE
1032         help
1033                 If you have an SGI Altix with an IOC4 based Base IO card
1034                 and wish to use the serial ports on this card, say Y.
1035                 Otherwise, say N.
1036
1037 config SERIAL_SGI_IOC3
1038         tristate "SGI Altix IOC3 serial support"
1039         depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1040         select SERIAL_CORE
1041         help
1042           If you have an SGI Altix with an IOC3 serial card,
1043           say Y or M.  Otherwise, say N.
1044
1045 config SERIAL_MSM
1046         tristate "MSM on-chip serial port support"
1047         depends on ARCH_QCOM
1048         select SERIAL_CORE
1049
1050 config SERIAL_MSM_CONSOLE
1051         bool "MSM serial console support"
1052         depends on SERIAL_MSM=y
1053         select SERIAL_CORE_CONSOLE
1054         select SERIAL_EARLYCON
1055
1056 config SERIAL_VT8500
1057         bool "VIA VT8500 on-chip serial port support"
1058         depends on ARCH_VT8500
1059         select SERIAL_CORE
1060
1061 config SERIAL_VT8500_CONSOLE
1062         bool "VIA VT8500 serial console support"
1063         depends on SERIAL_VT8500=y
1064         select SERIAL_CORE_CONSOLE
1065
1066 config SERIAL_ETRAXFS
1067         bool "ETRAX FS serial port support"
1068         depends on ETRAX_ARCH_V32 && OF
1069         select SERIAL_CORE
1070         select SERIAL_MCTRL_GPIO if GPIOLIB
1071
1072 config SERIAL_ETRAXFS_CONSOLE
1073         bool "ETRAX FS serial console support"
1074         depends on SERIAL_ETRAXFS
1075         select SERIAL_CORE_CONSOLE
1076
1077 config SERIAL_NETX
1078         tristate "NetX serial port support"
1079         depends on ARCH_NETX
1080         select SERIAL_CORE
1081         help
1082           If you have a machine based on a Hilscher NetX SoC you
1083           can enable its onboard serial port by enabling this option.
1084
1085           To compile this driver as a module, choose M here: the
1086           module will be called netx-serial.
1087
1088 config SERIAL_NETX_CONSOLE
1089         bool "Console on NetX serial port"
1090         depends on SERIAL_NETX=y
1091         select SERIAL_CORE_CONSOLE
1092         help
1093           If you have enabled the serial port on the Hilscher NetX SoC
1094           you can make it the console by answering Y to this option.
1095
1096 config SERIAL_OMAP
1097         tristate "OMAP serial port support"
1098         depends on ARCH_OMAP2PLUS
1099         select SERIAL_CORE
1100         help
1101           If you have a machine based on an Texas Instruments OMAP CPU you
1102           can enable its onboard serial ports by enabling this option.
1103
1104           By enabling this option you take advantage of dma feature available
1105           with the omap-serial driver. DMA support can be enabled from platform
1106           data.
1107
1108 config SERIAL_OMAP_CONSOLE
1109         bool "Console on OMAP serial port"
1110         depends on SERIAL_OMAP=y
1111         select SERIAL_CORE_CONSOLE
1112         help
1113           Select this option if you would like to use omap serial port as
1114           console.
1115
1116           Even if you say Y here, the currently visible virtual console
1117           (/dev/tty0) will still be used as the system console by default, but
1118           you can alter that using a kernel command line option such as
1119           "console=ttyOx". (Try "man bootparam" or see the documentation of
1120           your boot loader about how to pass options to the kernel at
1121           boot time.)
1122
1123 config SERIAL_LANTIQ
1124         bool "Lantiq serial driver"
1125         depends on LANTIQ
1126         select SERIAL_CORE
1127         select SERIAL_CORE_CONSOLE
1128         help
1129           Support for console and UART on Lantiq SoCs.
1130
1131 config SERIAL_QE
1132         tristate "Freescale QUICC Engine serial port support"
1133         depends on QUICC_ENGINE
1134         select SERIAL_CORE
1135         select FW_LOADER
1136         default n
1137         help
1138           This driver supports the QE serial ports on Freescale embedded
1139           PowerPC that contain a QUICC Engine.
1140
1141 config SERIAL_SCCNXP
1142         tristate "SCCNXP serial port support"
1143         select SERIAL_CORE
1144         help
1145           This selects support for an advanced UART from NXP (Philips).
1146           Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
1147           SC28L202, SCC68681 and SCC68692.
1148
1149 config SERIAL_SCCNXP_CONSOLE
1150         bool "Console on SCCNXP serial port"
1151         depends on SERIAL_SCCNXP=y
1152         select SERIAL_CORE_CONSOLE
1153         help
1154           Support for console on SCCNXP serial ports.
1155
1156 config SERIAL_SC16IS7XX_CORE
1157         tristate
1158
1159 config SERIAL_SC16IS7XX
1160         tristate "SC16IS7xx serial support"
1161         select SERIAL_CORE
1162         depends on (SPI_MASTER && !I2C) || I2C
1163         help
1164           This selects support for SC16IS7xx serial ports.
1165           Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
1166           SC16IS760 and SC16IS762. Select supported buses using options below.
1167
1168 config SERIAL_SC16IS7XX_I2C
1169         bool "SC16IS7xx for I2C interface"
1170         depends on SERIAL_SC16IS7XX
1171         depends on I2C
1172         select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
1173         select REGMAP_I2C if I2C
1174         default y
1175         help
1176           Enable SC16IS7xx driver on I2C bus,
1177           If required say y, and say n to i2c if not required,
1178           Enabled by default to support oldconfig.
1179           You must select at least one bus for the driver to be built.
1180
1181 config SERIAL_SC16IS7XX_SPI
1182         bool "SC16IS7xx for spi interface"
1183         depends on SERIAL_SC16IS7XX
1184         depends on SPI_MASTER
1185         select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
1186         select REGMAP_SPI if SPI_MASTER
1187         help
1188           Enable SC16IS7xx driver on SPI bus,
1189           If required say y, and say n to spi if not required,
1190           This is additional support to exsisting driver.
1191           You must select at least one bus for the driver to be built.
1192
1193 config SERIAL_BFIN_SPORT
1194         tristate "Blackfin SPORT emulate UART"
1195         depends on BLACKFIN
1196         select SERIAL_CORE
1197         help
1198           Enable SPORT emulate UART on Blackfin series.
1199
1200           To compile this driver as a module, choose M here: the
1201           module will be called bfin_sport_uart.
1202
1203 config SERIAL_BFIN_SPORT_CONSOLE
1204         bool "Console on Blackfin sport emulated uart"
1205         depends on SERIAL_BFIN_SPORT=y
1206         select SERIAL_CORE_CONSOLE
1207
1208 config SERIAL_BFIN_SPORT0_UART
1209         bool "Enable UART over SPORT0"
1210         depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
1211         help
1212           Enable UART over SPORT0
1213
1214 config SERIAL_BFIN_SPORT0_UART_CTSRTS
1215         bool "Enable UART over SPORT0 hardware flow control"
1216         depends on SERIAL_BFIN_SPORT0_UART
1217         help
1218           Enable hardware flow control in the driver.
1219
1220 config SERIAL_BFIN_SPORT1_UART
1221         bool "Enable UART over SPORT1"
1222         depends on SERIAL_BFIN_SPORT
1223         help
1224           Enable UART over SPORT1
1225
1226 config SERIAL_BFIN_SPORT1_UART_CTSRTS
1227         bool "Enable UART over SPORT1 hardware flow control"
1228         depends on SERIAL_BFIN_SPORT1_UART
1229         help
1230           Enable hardware flow control in the driver.
1231
1232 config SERIAL_BFIN_SPORT2_UART
1233         bool "Enable UART over SPORT2"
1234         depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1235         help
1236           Enable UART over SPORT2
1237
1238 config SERIAL_BFIN_SPORT2_UART_CTSRTS
1239         bool "Enable UART over SPORT2 hardware flow control"
1240         depends on SERIAL_BFIN_SPORT2_UART
1241         help
1242           Enable hardware flow control in the driver.
1243
1244 config SERIAL_BFIN_SPORT3_UART
1245         bool "Enable UART over SPORT3"
1246         depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1247         help
1248           Enable UART over SPORT3
1249
1250 config SERIAL_BFIN_SPORT3_UART_CTSRTS
1251         bool "Enable UART over SPORT3 hardware flow control"
1252         depends on SERIAL_BFIN_SPORT3_UART
1253         help
1254           Enable hardware flow control in the driver.
1255
1256 config SERIAL_TIMBERDALE
1257         tristate "Support for timberdale UART"
1258         select SERIAL_CORE
1259         depends on X86_32 || COMPILE_TEST
1260         ---help---
1261         Add support for UART controller on timberdale.
1262
1263 config SERIAL_BCM63XX
1264         tristate "Broadcom BCM63xx/BCM33xx UART support"
1265         select SERIAL_CORE
1266         depends on MIPS || ARM || COMPILE_TEST
1267         help
1268           This enables the driver for the onchip UART core found on
1269           the following chipsets:
1270
1271             BCM33xx (cable modem)
1272             BCM63xx/BCM63xxx (DSL)
1273             BCM68xx (PON)
1274             BCM7xxx (STB) - DOCSIS console
1275
1276 config SERIAL_BCM63XX_CONSOLE
1277         bool "Console on BCM63xx serial port"
1278         depends on SERIAL_BCM63XX=y
1279         select SERIAL_CORE_CONSOLE
1280         select SERIAL_EARLYCON
1281         help
1282           If you have enabled the serial port on the BCM63xx CPU
1283           you can make it the console by answering Y to this option.
1284
1285 config SERIAL_GRLIB_GAISLER_APBUART
1286         tristate "GRLIB APBUART serial support"
1287         depends on OF && SPARC
1288         select SERIAL_CORE
1289         ---help---
1290         Add support for the GRLIB APBUART serial port.
1291
1292 config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
1293         bool "Console on GRLIB APBUART serial port"
1294         depends on SERIAL_GRLIB_GAISLER_APBUART=y
1295         select SERIAL_CORE_CONSOLE
1296         help
1297         Support for running a console on the GRLIB APBUART
1298
1299 config SERIAL_ALTERA_JTAGUART
1300         tristate "Altera JTAG UART support"
1301         select SERIAL_CORE
1302         help
1303           This driver supports the Altera JTAG UART port.
1304
1305 config SERIAL_ALTERA_JTAGUART_CONSOLE
1306         bool "Altera JTAG UART console support"
1307         depends on SERIAL_ALTERA_JTAGUART=y
1308         select SERIAL_CORE_CONSOLE
1309         help
1310           Enable a Altera JTAG UART port to be the system console.
1311
1312 config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
1313         bool "Bypass output when no connection"
1314         depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1315         select SERIAL_CORE_CONSOLE
1316         help
1317           Bypass console output and keep going even if there is no
1318           JTAG terminal connection with the host.
1319
1320 config SERIAL_ALTERA_UART
1321         tristate "Altera UART support"
1322         select SERIAL_CORE
1323         help
1324           This driver supports the Altera softcore UART port.
1325
1326 config SERIAL_ALTERA_UART_MAXPORTS
1327         int "Maximum number of Altera UART ports"
1328         depends on SERIAL_ALTERA_UART
1329         default 4
1330         help
1331           This setting lets you define the maximum number of the Altera
1332           UART ports. The usual default varies from board to board, and
1333           this setting is a way of catering for that.
1334
1335 config SERIAL_ALTERA_UART_BAUDRATE
1336         int "Default baudrate for Altera UART ports"
1337         depends on SERIAL_ALTERA_UART
1338         default 115200
1339         help
1340           This setting lets you define what the default baudrate is for the
1341           Altera UART ports. The usual default varies from board to board,
1342           and this setting is a way of catering for that.
1343
1344 config SERIAL_ALTERA_UART_CONSOLE
1345         bool "Altera UART console support"
1346         depends on SERIAL_ALTERA_UART=y
1347         select SERIAL_CORE_CONSOLE
1348         help
1349           Enable a Altera UART port to be the system console.
1350
1351 config SERIAL_IFX6X60
1352         tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
1353         depends on GPIOLIB || COMPILE_TEST
1354         depends on SPI && HAS_DMA
1355         help
1356           Support for the IFX6x60 modem devices on Intel MID platforms.
1357
1358 config SERIAL_PCH_UART
1359         tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1360         depends on PCI && (X86_32 || COMPILE_TEST)
1361         select SERIAL_CORE
1362         help
1363           This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1364           which is an IOH(Input/Output Hub) for x86 embedded processor.
1365           Enabling PCH_DMA, this PCH UART works as DMA mode.
1366
1367           This driver also can be used for LAPIS Semiconductor IOH(Input/
1368           Output Hub), ML7213, ML7223 and ML7831.
1369           ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1370           for MP(Media Phone) use and ML7831 IOH is for general purpose use.
1371           ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1372           ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
1373
1374 config SERIAL_PCH_UART_CONSOLE
1375         bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1376         depends on SERIAL_PCH_UART=y
1377         select SERIAL_CORE_CONSOLE
1378         help
1379           Say Y here if you wish to use the PCH UART as the system console
1380           (the system  console is the device which receives all kernel messages and
1381           warnings and which allows logins in single user mode).
1382
1383 config SERIAL_MXS_AUART
1384         tristate "MXS AUART support"
1385         depends on HAS_DMA
1386         depends on ARCH_MXS || COMPILE_TEST
1387         select SERIAL_CORE
1388         select SERIAL_MCTRL_GPIO if GPIOLIB
1389         help
1390           This driver supports the MXS Application UART (AUART) port.
1391
1392 config SERIAL_MXS_AUART_CONSOLE
1393         bool "MXS AUART console support"
1394         depends on SERIAL_MXS_AUART=y
1395         select SERIAL_CORE_CONSOLE
1396         help
1397           Enable a MXS AUART port to be the system console.
1398
1399 config SERIAL_XILINX_PS_UART
1400         tristate "Cadence (Xilinx Zynq) UART support"
1401         depends on OF
1402         select SERIAL_CORE
1403         help
1404           This driver supports the Cadence UART. It is found e.g. in Xilinx
1405           Zynq.
1406
1407 config SERIAL_XILINX_PS_UART_CONSOLE
1408         bool "Cadence UART console support"
1409         depends on SERIAL_XILINX_PS_UART=y
1410         select SERIAL_CORE_CONSOLE
1411         select SERIAL_EARLYCON
1412         help
1413           Enable a Cadence UART port to be the system console.
1414
1415 config SERIAL_AR933X
1416         tristate "AR933X serial port support"
1417         depends on HAVE_CLK && SOC_AR933X
1418         select SERIAL_CORE
1419         help
1420           If you have an Atheros AR933X SOC based board and want to use the
1421           built-in UART of the SoC, say Y to this option.
1422
1423           To compile this driver as a module, choose M here: the
1424           module will be called ar933x_uart.
1425
1426 config SERIAL_AR933X_CONSOLE
1427         bool "Console on AR933X serial port"
1428         depends on SERIAL_AR933X=y
1429         select SERIAL_CORE_CONSOLE
1430         help
1431           Enable a built-in UART port of the AR933X to be the system console.
1432
1433 config SERIAL_AR933X_NR_UARTS
1434         int "Maximum number of AR933X serial ports"
1435         depends on SERIAL_AR933X
1436         default "2"
1437         help
1438           Set this to the number of serial ports you want the driver
1439           to support.
1440
1441 config SERIAL_EFM32_UART
1442         tristate "EFM32 UART/USART port"
1443         depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1444         select SERIAL_CORE
1445         help
1446           This driver support the USART and UART ports on
1447           Energy Micro's efm32 SoCs.
1448
1449 config SERIAL_EFM32_UART_CONSOLE
1450         bool "EFM32 UART/USART console support"
1451         depends on SERIAL_EFM32_UART=y
1452         select SERIAL_CORE_CONSOLE
1453
1454 config SERIAL_TILEGX
1455         tristate "TILE-Gx on-chip serial port support"
1456         depends on TILEGX
1457         select TILE_GXIO_UART
1458         select SERIAL_CORE
1459         ---help---
1460           This device provides access to the on-chip UARTs on the TILE-Gx
1461           processor.
1462
1463 config SERIAL_ARC
1464         tristate "ARC UART driver support"
1465         select SERIAL_CORE
1466         help
1467           Driver for on-chip UART for ARC(Synopsys) for the legacy
1468           FPGA Boards (ML50x/ARCAngel4)
1469
1470 config SERIAL_ARC_CONSOLE
1471         bool "Console on ARC UART"
1472         depends on SERIAL_ARC=y
1473         select SERIAL_CORE_CONSOLE
1474         select SERIAL_EARLYCON
1475         help
1476           Enable system Console on ARC UART
1477
1478 config SERIAL_ARC_NR_PORTS
1479         int "Number of ARC UART ports"
1480         depends on SERIAL_ARC
1481         range 1 3
1482         default "1"
1483         help
1484           Set this to the number of serial ports you want the driver
1485           to support.
1486
1487 config SERIAL_RP2
1488         tristate "Comtrol RocketPort EXPRESS/INFINITY support"
1489         depends on PCI
1490         select SERIAL_CORE
1491         help
1492           This driver supports the Comtrol RocketPort EXPRESS and
1493           RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1494           These adapters use a "RocketPort 2" ASIC that is not compatible
1495           with the original RocketPort driver (CONFIG_ROCKETPORT).
1496
1497           To compile this driver as a module, choose M here: the
1498           module will be called rp2.
1499
1500           If you want to compile this driver into the kernel, say Y here.  If
1501           you don't have a suitable RocketPort card installed, say N.
1502
1503 config SERIAL_RP2_NR_UARTS
1504         int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1505         depends on SERIAL_RP2
1506         default "32"
1507         help
1508           If multiple cards are present, the default limit of 32 ports may
1509           need to be increased.
1510
1511 config SERIAL_FSL_LPUART
1512         tristate "Freescale lpuart serial port support"
1513         depends on HAS_DMA
1514         select SERIAL_CORE
1515         help
1516           Support for the on-chip lpuart on some Freescale SOCs.
1517
1518 config SERIAL_FSL_LPUART_CONSOLE
1519         bool "Console on Freescale lpuart serial port"
1520         depends on SERIAL_FSL_LPUART=y
1521         select SERIAL_CORE_CONSOLE
1522         select SERIAL_EARLYCON
1523         help
1524           If you have enabled the lpuart serial port on the Freescale SoCs,
1525           you can make it the console by answering Y to this option.
1526
1527 config SERIAL_CONEXANT_DIGICOLOR
1528         tristate "Conexant Digicolor CX92xxx USART serial port support"
1529         depends on OF
1530         select SERIAL_CORE
1531         help
1532           Support for the on-chip USART on Conexant Digicolor SoCs.
1533
1534 config SERIAL_CONEXANT_DIGICOLOR_CONSOLE
1535         bool "Console on Conexant Digicolor serial port"
1536         depends on SERIAL_CONEXANT_DIGICOLOR=y
1537         select SERIAL_CORE_CONSOLE
1538         help
1539           If you have enabled the USART serial port on Conexant Digicolor
1540           SoCs, you can make it the console by answering Y to this option.
1541
1542 config SERIAL_ST_ASC
1543         tristate "ST ASC serial port support"
1544         select SERIAL_CORE
1545         depends on ARM || COMPILE_TEST
1546         help
1547           This driver is for the on-chip Asychronous Serial Controller on
1548           STMicroelectronics STi SoCs.
1549           ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
1550           It support all industry standard baud rates.
1551
1552           If unsure, say N.
1553
1554 config SERIAL_ST_ASC_CONSOLE
1555         bool "Support for console on ST ASC"
1556         depends on SERIAL_ST_ASC=y
1557         select SERIAL_CORE_CONSOLE
1558
1559 config SERIAL_MEN_Z135
1560         tristate "MEN 16z135 Support"
1561         select SERIAL_CORE
1562         depends on MCB
1563         help
1564           Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1565           on a MCB carrier.
1566
1567           This driver can also be build as a module. If so, the module will be called
1568           men_z135_uart.ko
1569
1570 config SERIAL_SPRD
1571         tristate "Support for Spreadtrum serial"
1572         depends on ARCH_SPRD
1573         select SERIAL_CORE
1574         help
1575           This enables the driver for the Spreadtrum's serial.
1576
1577 config SERIAL_SPRD_CONSOLE
1578         bool "Spreadtrum UART console support"
1579         depends on SERIAL_SPRD=y
1580         select SERIAL_CORE_CONSOLE
1581         select SERIAL_EARLYCON
1582         help
1583           Support for early debug console using Spreadtrum's serial. This enables
1584           the console before standard serial driver is probed. This is enabled
1585           with "earlycon" on the kernel command line. The console is
1586           enabled when early_param is processed.
1587
1588 config SERIAL_STM32
1589         tristate "STMicroelectronics STM32 serial port support"
1590         select SERIAL_CORE
1591         depends on ARM || COMPILE_TEST
1592         help
1593           This driver is for the on-chip Serial Controller on
1594           STMicroelectronics STM32 MCUs.
1595           USART supports Rx & Tx functionality.
1596           It support all industry standard baud rates.
1597
1598           If unsure, say N.
1599
1600 config SERIAL_STM32_CONSOLE
1601         bool "Support for console on STM32"
1602         depends on SERIAL_STM32=y
1603         select SERIAL_CORE_CONSOLE
1604
1605 config SERIAL_MVEBU_UART
1606         bool "Marvell EBU serial port support"
1607         select SERIAL_CORE
1608         help
1609           This driver is for Marvell EBU SoC's UART. If you have a machine
1610           based on the Armada-3700 SoC and wish to use the on-board serial
1611           port,
1612           say 'Y' here.
1613           Otherwise, say 'N'.
1614
1615 config SERIAL_MVEBU_CONSOLE
1616         bool "Console on Marvell EBU serial port"
1617         depends on SERIAL_MVEBU_UART
1618         select SERIAL_CORE_CONSOLE
1619         select SERIAL_EARLYCON
1620         default y
1621         help
1622           Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1623           (the system console is the device which receives all kernel messages
1624           and warnings and which allows logins in single user mode)
1625           Otherwise, say 'N'.
1626
1627 endmenu
1628
1629 config SERIAL_MCTRL_GPIO
1630         tristate
1631
1632 endif # TTY