drivers/tty/serial/sh-sci.h

   1 #include <linux/bitops.h>
   2 #include <linux/serial_core.h>
   3 #include <linux/io.h>
   4 #include <linux/gpio.h>
   5
   6 #define SCI_MAJOR               204
   7 #define SCI_MINOR_START         8
   8
   9
  10 /*
  11  * SCI register subset common for all port types.
  12  * Not all registers will exist on all parts.
  13  */
  14 enum {
  15         SCSMR,                          /* Serial Mode Register */
  16         SCBRR,                          /* Bit Rate Register */
  17         SCSCR,                          /* Serial Control Register */
  18         SCxSR,                          /* Serial Status Register */
  19         SCFCR,                          /* FIFO Control Register */
  20         SCFDR,                          /* FIFO Data Count Register */
  21         SCxTDR,                         /* Transmit (FIFO) Data Register */
  22         SCxRDR,                         /* Receive (FIFO) Data Register */
  23         SCLSR,                          /* Line Status Register */
  24         SCTFDR,                         /* Transmit FIFO Data Count Register */
  25         SCRFDR,                         /* Receive FIFO Data Count Register */
  26         SCSPTR,                         /* Serial Port Register */
  27         HSSRR,                          /* Sampling Rate Register */
  28         SCPCR,                          /* Serial Port Control Register */
  29         SCPDR,                          /* Serial Port Data Register */
  30         SCDL,                           /* BRG Frequency Division Register */
  31         SCCKS,                          /* BRG Clock Select Register */
  32
  33         SCIx_NR_REGS,
  34 };
  35
  36
  37 /* SCSMR (Serial Mode Register) */
  38 #define SCSMR_C_A       BIT(7)  /* Communication Mode */
  39 #define SCSMR_CSYNC     BIT(7)  /*   - Clocked synchronous mode */
  40 #define SCSMR_ASYNC     0       /*   - Asynchronous mode */
  41 #define SCSMR_CHR       BIT(6)  /* 7-bit Character Length */
  42 #define SCSMR_PE        BIT(5)  /* Parity Enable */
  43 #define SCSMR_ODD       BIT(4)  /* Odd Parity */
  44 #define SCSMR_STOP      BIT(3)  /* Stop Bit Length */
  45 #define SCSMR_CKS       0x0003  /* Clock Select */
  46
  47 /* Serial Mode Register, SCIFA/SCIFB only bits */
  48 #define SCSMR_CKEDG     BIT(12) /* Transmit/Receive Clock Edge Select */
  49 #define SCSMR_SRC_MASK  0x0700  /* Sampling Control */
  50 #define SCSMR_SRC_16    0x0000  /* Sampling rate 1/16 */
  51 #define SCSMR_SRC_5     0x0100  /* Sampling rate 1/5 */
  52 #define SCSMR_SRC_7     0x0200  /* Sampling rate 1/7 */
  53 #define SCSMR_SRC_11    0x0300  /* Sampling rate 1/11 */
  54 #define SCSMR_SRC_13    0x0400  /* Sampling rate 1/13 */
  55 #define SCSMR_SRC_17    0x0500  /* Sampling rate 1/17 */
  56 #define SCSMR_SRC_19    0x0600  /* Sampling rate 1/19 */
  57 #define SCSMR_SRC_27    0x0700  /* Sampling rate 1/27 */
  58
  59 /* Serial Control Register, SCIFA/SCIFB only bits */
  60 #define SCSCR_TDRQE     BIT(15) /* Tx Data Transfer Request Enable */
  61 #define SCSCR_RDRQE     BIT(14) /* Rx Data Transfer Request Enable */
  62
  63 /* SCxSR (Serial Status Register) on SCI */
  64 #define SCI_TDRE        BIT(7)  /* Transmit Data Register Empty */
  65 #define SCI_RDRF        BIT(6)  /* Receive Data Register Full */
  66 #define SCI_ORER        BIT(5)  /* Overrun Error */
  67 #define SCI_FER         BIT(4)  /* Framing Error */
  68 #define SCI_PER         BIT(3)  /* Parity Error */
  69 #define SCI_TEND        BIT(2)  /* Transmit End */
  70 #define SCI_RESERVED    0x03    /* All reserved bits */
  71
  72 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
  73
  74 #define SCI_RDxF_CLEAR  (u32)(~(SCI_RESERVED | SCI_RDRF))
  75 #define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
  76 #define SCI_TDxE_CLEAR  (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE))
  77 #define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
  78
  79 /* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
  80 #define SCIF_ER         BIT(7)  /* Receive Error */
  81 #define SCIF_TEND       BIT(6)  /* Transmission End */
  82 #define SCIF_TDFE       BIT(5)  /* Transmit FIFO Data Empty */
  83 #define SCIF_BRK        BIT(4)  /* Break Detect */
  84 #define SCIF_FER        BIT(3)  /* Framing Error */
  85 #define SCIF_PER        BIT(2)  /* Parity Error */
  86 #define SCIF_RDF        BIT(1)  /* Receive FIFO Data Full */
  87 #define SCIF_DR         BIT(0)  /* Receive Data Ready */
  88 /* SCIF only (optional) */
  89 #define SCIF_PERC       0xf000  /* Number of Parity Errors */
  90 #define SCIF_FERC       0x0f00  /* Number of Framing Errors */
  91 /*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */
  92 #define SCIFA_ORER      BIT(9)  /* Overrun Error */
  93
  94 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
  95
  96 #define SCIF_RDxF_CLEAR         (u32)(~(SCIF_DR | SCIF_RDF))
  97 #define SCIF_ERROR_CLEAR        (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER))
  98 #define SCIF_TDxE_CLEAR         (u32)(~(SCIF_TDFE))
  99 #define SCIF_BREAK_CLEAR        (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
 100
 101 /* SCFCR (FIFO Control Register) */
 102 #define SCFCR_MCE       BIT(3)  /* Modem Control Enable */
 103 #define SCFCR_TFRST     BIT(2)  /* Transmit FIFO Data Register Reset */
 104 #define SCFCR_RFRST     BIT(1)  /* Receive FIFO Data Register Reset */
 105 #define SCFCR_LOOP      BIT(0)  /* Loopback Test */
 106
 107 /* SCLSR (Line Status Register) on (H)SCIF */
 108 #define SCLSR_TO        BIT(2)  /* Timeout */
 109 #define SCLSR_ORER      BIT(0)  /* Overrun Error */
 110
 111 /* SCSPTR (Serial Port Register), optional */
 112 #define SCSPTR_RTSIO    BIT(7)  /* Serial Port RTS# Pin Input/Output */
 113 #define SCSPTR_RTSDT    BIT(6)  /* Serial Port RTS# Pin Data */
 114 #define SCSPTR_CTSIO    BIT(5)  /* Serial Port CTS# Pin Input/Output */
 115 #define SCSPTR_CTSDT    BIT(4)  /* Serial Port CTS# Pin Data */
 116 #define SCSPTR_SCKIO    BIT(3)  /* Serial Port Clock Pin Input/Output */
 117 #define SCSPTR_SCKDT    BIT(2)  /* Serial Port Clock Pin Data */
 118 #define SCSPTR_SPB2IO   BIT(1)  /* Serial Port Break Input/Output */
 119 #define SCSPTR_SPB2DT   BIT(0)  /* Serial Port Break Data */
 120
 121 /* HSSRR HSCIF */
 122 #define HSCIF_SRE       BIT(15) /* Sampling Rate Register Enable */
 123
 124 /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
 125 #define SCPCR_RTSC      BIT(4)  /* Serial Port RTS# Pin / Output Pin */
 126 #define SCPCR_CTSC      BIT(3)  /* Serial Port CTS# Pin / Input Pin */
 127 #define SCPCR_SCKC      BIT(2)  /* Serial Port SCK Pin / Output Pin */
 128 #define SCPCR_RXDC      BIT(1)  /* Serial Port RXD Pin / Input Pin */
 129 #define SCPCR_TXDC      BIT(0)  /* Serial Port TXD Pin / Output Pin */
 130
 131 /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
 132 #define SCPDR_RTSD      BIT(4)  /* Serial Port RTS# Output Pin Data */
 133 #define SCPDR_CTSD      BIT(3)  /* Serial Port CTS# Input Pin Data */
 134 #define SCPDR_SCKD      BIT(2)  /* Serial Port SCK Output Pin Data */
 135 #define SCPDR_RXDD      BIT(1)  /* Serial Port RXD Input Pin Data */
 136 #define SCPDR_TXDD      BIT(0)  /* Serial Port TXD Output Pin Data */
 137
 138 /*
 139  * BRG Clock Select Register (Some SCIF and HSCIF)
 140  * The Baud Rate Generator for external clock can provide a clock source for
 141  * the sampling clock. It outputs either its frequency divided clock, or the
 142  * (undivided) (H)SCK external clock.
 143  */
 144 #define SCCKS_CKS       BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */
 145 #define SCCKS_XIN       BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */
 146
 147 #define SCxSR_TEND(port)        (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 148 #define SCxSR_RDxF(port)        (((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
 149 #define SCxSR_TDxE(port)        (((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
 150 #define SCxSR_FER(port)         (((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
 151 #define SCxSR_PER(port)         (((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 152 #define SCxSR_BRK(port)         (((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 153
 154 #define SCxSR_ERRORS(port)      (to_sci_port(port)->error_mask)
 155
 156 #define SCxSR_RDxF_CLEAR(port) \
 157         (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
 158 #define SCxSR_ERROR_CLEAR(port) \
 159         (to_sci_port(port)->error_clear)
 160 #define SCxSR_TDxE_CLEAR(port) \
 161         (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
 162 #define SCxSR_BREAK_CLEAR(port) \
 163         (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)