projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
[deliverable/linux.git] / drivers / tty / serial / sunzilog.c
1 /* sunzilog.c: Zilog serial driver for Sparc systems.
2 *
3 * Driver for Zilog serial chips found on Sun workstations and
4 * servers. This driver could actually be made more generic.
5 *
6 * This is based on the old drivers/sbus/char/zs.c code. A lot
7 * of code has been simply moved over directly from there but
8 * much has been rewritten. Credits therefore go out to Eddie
9 * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
10 * work there.
11 *
12 * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net)
13 */
14
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/delay.h>
19 #include <linux/tty.h>
20 #include <linux/tty_flip.h>
21 #include <linux/major.h>
22 #include <linux/string.h>
23 #include <linux/ptrace.h>
24 #include <linux/ioport.h>
25 #include <linux/slab.h>
26 #include <linux/circ_buf.h>
27 #include <linux/serial.h>
28 #include <linux/sysrq.h>
29 #include <linux/console.h>
30 #include <linux/spinlock.h>
31 #ifdef CONFIG_SERIO
32 #include <linux/serio.h>
33 #endif
34 #include <linux/init.h>
35 #include <linux/of_device.h>
36
37 #include <asm/io.h>
38 #include <asm/irq.h>
39 #include <asm/prom.h>
40 #include <asm/setup.h>
41
42 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
43 #define SUPPORT_SYSRQ
44 #endif
45
46 #include <linux/serial_core.h>
47 #include <linux/sunserialcore.h>
48
49 #include "sunzilog.h"
50
51 /* On 32-bit sparcs we need to delay after register accesses
52 * to accommodate sun4 systems, but we do not need to flush writes.
53 * On 64-bit sparc we only need to flush single writes to ensure
54 * completion.
55 */
56 #ifndef CONFIG_SPARC64
57 #define ZSDELAY() udelay(5)
58 #define ZSDELAY_LONG() udelay(20)
59 #define ZS_WSYNC(channel) do { } while (0)
60 #else
61 #define ZSDELAY()
62 #define ZSDELAY_LONG()
63 #define ZS_WSYNC(__channel) \
64 readb(&((__channel)->control))
65 #endif
66
67 #define ZS_CLOCK 4915200 /* Zilog input clock rate. */
68 #define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
69
70 /*
71 * We wrap our port structure around the generic uart_port.
72 */
73 struct uart_sunzilog_port {
74 struct uart_port port;
75
76 /* IRQ servicing chain. */
77 struct uart_sunzilog_port *next;
78
79 /* Current values of Zilog write registers. */
80 unsigned char curregs[NUM_ZSREGS];
81
82 unsigned int flags;
83 #define SUNZILOG_FLAG_CONS_KEYB 0x00000001
84 #define SUNZILOG_FLAG_CONS_MOUSE 0x00000002
85 #define SUNZILOG_FLAG_IS_CONS 0x00000004
86 #define SUNZILOG_FLAG_IS_KGDB 0x00000008
87 #define SUNZILOG_FLAG_MODEM_STATUS 0x00000010
88 #define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020
89 #define SUNZILOG_FLAG_REGS_HELD 0x00000040
90 #define SUNZILOG_FLAG_TX_STOPPED 0x00000080
91 #define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
92 #define SUNZILOG_FLAG_ESCC 0x00000200
93 #define SUNZILOG_FLAG_ISR_HANDLER 0x00000400
94
95 unsigned int cflag;
96
97 unsigned char parity_mask;
98 unsigned char prev_status;
99
100 #ifdef CONFIG_SERIO
101 struct serio serio;
102 int serio_open;
103 #endif
104 };
105
106 static void sunzilog_putchar(struct uart_port *port, int ch);
107
108 #define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase))
109 #define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT))
110
111 #define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
112 #define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
113 #define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS)
114 #define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
115 #define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
116 #define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
117 #define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
118 #define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
119 #define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
120
121 /* Reading and writing Zilog8530 registers. The delays are to make this
122 * driver work on the Sun4 which needs a settling delay after each chip
123 * register access, other machines handle this in hardware via auxiliary
124 * flip-flops which implement the settle time we do in software.
125 *
126 * The port lock must be held and local IRQs must be disabled
127 * when {read,write}_zsreg is invoked.
128 */
129 static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
130 unsigned char reg)
131 {
132 unsigned char retval;
133
134 writeb(reg, &channel->control);
135 ZSDELAY();
136 retval = readb(&channel->control);
137 ZSDELAY();
138
139 return retval;
140 }
141
142 static void write_zsreg(struct zilog_channel __iomem *channel,
143 unsigned char reg, unsigned char value)
144 {
145 writeb(reg, &channel->control);
146 ZSDELAY();
147 writeb(value, &channel->control);
148 ZSDELAY();
149 }
150
151 static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
152 {
153 int i;
154
155 for (i = 0; i < 32; i++) {
156 unsigned char regval;
157
158 regval = readb(&channel->control);
159 ZSDELAY();
160 if (regval & Rx_CH_AV)
161 break;
162
163 regval = read_zsreg(channel, R1);
164 readb(&channel->data);
165 ZSDELAY();
166
167 if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
168 writeb(ERR_RES, &channel->control);
169 ZSDELAY();
170 ZS_WSYNC(channel);
171 }
172 }
173 }
174
175 /* This function must only be called when the TX is not busy. The UART
176 * port lock must be held and local interrupts disabled.
177 */
178 static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
179 {
180 int i;
181 int escc;
182 unsigned char r15;
183
184 /* Let pending transmits finish. */
185 for (i = 0; i < 1000; i++) {
186 unsigned char stat = read_zsreg(channel, R1);
187 if (stat & ALL_SNT)
188 break;
189 udelay(100);
190 }
191
192 writeb(ERR_RES, &channel->control);
193 ZSDELAY();
194 ZS_WSYNC(channel);
195
196 sunzilog_clear_fifo(channel);
197
198 /* Disable all interrupts. */
199 write_zsreg(channel, R1,
200 regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
201
202 /* Set parity, sync config, stop bits, and clock divisor. */
203 write_zsreg(channel, R4, regs[R4]);
204
205 /* Set misc. TX/RX control bits. */
206 write_zsreg(channel, R10, regs[R10]);
207
208 /* Set TX/RX controls sans the enable bits. */
209 write_zsreg(channel, R3, regs[R3] & ~RxENAB);
210 write_zsreg(channel, R5, regs[R5] & ~TxENAB);
211
212 /* Synchronous mode config. */
213 write_zsreg(channel, R6, regs[R6]);
214 write_zsreg(channel, R7, regs[R7]);
215
216 /* Don't mess with the interrupt vector (R2, unused by us) and
217 * master interrupt control (R9). We make sure this is setup
218 * properly at probe time then never touch it again.
219 */
220
221 /* Disable baud generator. */
222 write_zsreg(channel, R14, regs[R14] & ~BRENAB);
223
224 /* Clock mode control. */
225 write_zsreg(channel, R11, regs[R11]);
226
227 /* Lower and upper byte of baud rate generator divisor. */
228 write_zsreg(channel, R12, regs[R12]);
229 write_zsreg(channel, R13, regs[R13]);
230
231 /* Now rewrite R14, with BRENAB (if set). */
232 write_zsreg(channel, R14, regs[R14]);
233
234 /* External status interrupt control. */
235 write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN);
236
237 /* ESCC Extension Register */
238 r15 = read_zsreg(channel, R15);
239 if (r15 & 0x01) {
240 write_zsreg(channel, R7, regs[R7p]);
241
242 /* External status interrupt and FIFO control. */
243 write_zsreg(channel, R15, regs[R15] & ~WR7pEN);
244 escc = 1;
245 } else {
246 /* Clear FIFO bit case it is an issue */
247 regs[R15] &= ~FIFOEN;
248 escc = 0;
249 }
250
251 /* Reset external status interrupts. */
252 write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */
253 write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */
254
255 /* Rewrite R3/R5, this time without enables masked. */
256 write_zsreg(channel, R3, regs[R3]);
257 write_zsreg(channel, R5, regs[R5]);
258
259 /* Rewrite R1, this time without IRQ enabled masked. */
260 write_zsreg(channel, R1, regs[R1]);
261
262 return escc;
263 }
264
265 /* Reprogram the Zilog channel HW registers with the copies found in the
266 * software state struct. If the transmitter is busy, we defer this update
267 * until the next TX complete interrupt. Else, we do it right now.
268 *
269 * The UART port lock must be held and local interrupts disabled.
270 */
271 static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
272 struct zilog_channel __iomem *channel)
273 {
274 if (!ZS_REGS_HELD(up)) {
275 if (ZS_TX_ACTIVE(up)) {
276 up->flags |= SUNZILOG_FLAG_REGS_HELD;
277 } else {
278 __load_zsregs(channel, up->curregs);
279 }
280 }
281 }
282
283 static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
284 {
285 unsigned int cur_cflag = up->cflag;
286 int brg, new_baud;
287
288 up->cflag &= ~CBAUD;
289 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
290
291 brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
292 up->curregs[R12] = (brg & 0xff);
293 up->curregs[R13] = (brg >> 8) & 0xff;
294 sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
295 }
296
297 static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
298 unsigned char ch, int is_break)
299 {
300 if (ZS_IS_KEYB(up)) {
301 /* Stop-A is handled by drivers/char/keyboard.c now. */
302 #ifdef CONFIG_SERIO
303 if (up->serio_open)
304 serio_interrupt(&up->serio, ch, 0);
305 #endif
306 } else if (ZS_IS_MOUSE(up)) {
307 int ret = suncore_mouse_baud_detection(ch, is_break);
308
309 switch (ret) {
310 case 2:
311 sunzilog_change_mouse_baud(up);
312 /* fallthru */
313 case 1:
314 break;
315
316 case 0:
317 #ifdef CONFIG_SERIO
318 if (up->serio_open)
319 serio_interrupt(&up->serio, ch, 0);
320 #endif
321 break;
322 };
323 }
324 }
325
326 static struct tty_struct *
327 sunzilog_receive_chars(struct uart_sunzilog_port *up,
328 struct zilog_channel __iomem *channel)
329 {
330 struct tty_struct *tty;
331 unsigned char ch, r1, flag;
332
333 tty = NULL;
334 if (up->port.state != NULL && /* Unopened serial console */
335 up->port.state->port.tty != NULL) /* Keyboard || mouse */
336 tty = up->port.state->port.tty;
337
338 for (;;) {
339
340 r1 = read_zsreg(channel, R1);
341 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
342 writeb(ERR_RES, &channel->control);
343 ZSDELAY();
344 ZS_WSYNC(channel);
345 }
346
347 ch = readb(&channel->control);
348 ZSDELAY();
349
350 /* This funny hack depends upon BRK_ABRT not interfering
351 * with the other bits we care about in R1.
352 */
353 if (ch & BRK_ABRT)
354 r1 |= BRK_ABRT;
355
356 if (!(ch & Rx_CH_AV))
357 break;
358
359 ch = readb(&channel->data);
360 ZSDELAY();
361
362 ch &= up->parity_mask;
363
364 if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
365 sunzilog_kbdms_receive_chars(up, ch, 0);
366 continue;
367 }
368
369 if (tty == NULL) {
370 uart_handle_sysrq_char(&up->port, ch);
371 continue;
372 }
373
374 /* A real serial line, record the character and status. */
375 flag = TTY_NORMAL;
376 up->port.icount.rx++;
377 if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
378 if (r1 & BRK_ABRT) {
379 r1 &= ~(PAR_ERR | CRC_ERR);
380 up->port.icount.brk++;
381 if (uart_handle_break(&up->port))
382 continue;
383 }
384 else if (r1 & PAR_ERR)
385 up->port.icount.parity++;
386 else if (r1 & CRC_ERR)
387 up->port.icount.frame++;
388 if (r1 & Rx_OVR)
389 up->port.icount.overrun++;
390 r1 &= up->port.read_status_mask;
391 if (r1 & BRK_ABRT)
392 flag = TTY_BREAK;
393 else if (r1 & PAR_ERR)
394 flag = TTY_PARITY;
395 else if (r1 & CRC_ERR)
396 flag = TTY_FRAME;
397 }
398 if (uart_handle_sysrq_char(&up->port, ch))
399 continue;
400
401 if (up->port.ignore_status_mask == 0xff ||
402 (r1 & up->port.ignore_status_mask) == 0) {
403 tty_insert_flip_char(tty, ch, flag);
404 }
405 if (r1 & Rx_OVR)
406 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
407 }
408
409 return tty;
410 }
411
412 static void sunzilog_status_handle(struct uart_sunzilog_port *up,
413 struct zilog_channel __iomem *channel)
414 {
415 unsigned char status;
416
417 status = readb(&channel->control);
418 ZSDELAY();
419
420 writeb(RES_EXT_INT, &channel->control);
421 ZSDELAY();
422 ZS_WSYNC(channel);
423
424 if (status & BRK_ABRT) {
425 if (ZS_IS_MOUSE(up))
426 sunzilog_kbdms_receive_chars(up, 0, 1);
427 if (ZS_IS_CONS(up)) {
428 /* Wait for BREAK to deassert to avoid potentially
429 * confusing the PROM.
430 */
431 while (1) {
432 status = readb(&channel->control);
433 ZSDELAY();
434 if (!(status & BRK_ABRT))
435 break;
436 }
437 sun_do_break();
438 return;
439 }
440 }
441
442 if (ZS_WANTS_MODEM_STATUS(up)) {
443 if (status & SYNC)
444 up->port.icount.dsr++;
445
446 /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
447 * But it does not tell us which bit has changed, we have to keep
448 * track of this ourselves.
449 */
450 if ((status ^ up->prev_status) ^ DCD)
451 uart_handle_dcd_change(&up->port,
452 (status & DCD));
453 if ((status ^ up->prev_status) ^ CTS)
454 uart_handle_cts_change(&up->port,
455 (status & CTS));
456
457 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
458 }
459
460 up->prev_status = status;
461 }
462
463 static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
464 struct zilog_channel __iomem *channel)
465 {
466 struct circ_buf *xmit;
467
468 if (ZS_IS_CONS(up)) {
469 unsigned char status = readb(&channel->control);
470 ZSDELAY();
471
472 /* TX still busy? Just wait for the next TX done interrupt.
473 *
474 * It can occur because of how we do serial console writes. It would
475 * be nice to transmit console writes just like we normally would for
476 * a TTY line. (ie. buffered and TX interrupt driven). That is not
477 * easy because console writes cannot sleep. One solution might be
478 * to poll on enough port->xmit space becoming free. -DaveM
479 */
480 if (!(status & Tx_BUF_EMP))
481 return;
482 }
483
484 up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
485
486 if (ZS_REGS_HELD(up)) {
487 __load_zsregs(channel, up->curregs);
488 up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
489 }
490
491 if (ZS_TX_STOPPED(up)) {
492 up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
493 goto ack_tx_int;
494 }
495
496 if (up->port.x_char) {
497 up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
498 writeb(up->port.x_char, &channel->data);
499 ZSDELAY();
500 ZS_WSYNC(channel);
501
502 up->port.icount.tx++;
503 up->port.x_char = 0;
504 return;
505 }
506
507 if (up->port.state == NULL)
508 goto ack_tx_int;
509 xmit = &up->port.state->xmit;
510 if (uart_circ_empty(xmit))
511 goto ack_tx_int;
512
513 if (uart_tx_stopped(&up->port))
514 goto ack_tx_int;
515
516 up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
517 writeb(xmit->buf[xmit->tail], &channel->data);
518 ZSDELAY();
519 ZS_WSYNC(channel);
520
521 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
522 up->port.icount.tx++;
523
524 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
525 uart_write_wakeup(&up->port);
526
527 return;
528
529 ack_tx_int:
530 writeb(RES_Tx_P, &channel->control);
531 ZSDELAY();
532 ZS_WSYNC(channel);
533 }
534
535 static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
536 {
537 struct uart_sunzilog_port *up = dev_id;
538
539 while (up) {
540 struct zilog_channel __iomem *channel
541 = ZILOG_CHANNEL_FROM_PORT(&up->port);
542 struct tty_struct *tty;
543 unsigned char r3;
544
545 spin_lock(&up->port.lock);
546 r3 = read_zsreg(channel, R3);
547
548 /* Channel A */
549 tty = NULL;
550 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
551 writeb(RES_H_IUS, &channel->control);
552 ZSDELAY();
553 ZS_WSYNC(channel);
554
555 if (r3 & CHARxIP)
556 tty = sunzilog_receive_chars(up, channel);
557 if (r3 & CHAEXT)
558 sunzilog_status_handle(up, channel);
559 if (r3 & CHATxIP)
560 sunzilog_transmit_chars(up, channel);
561 }
562 spin_unlock(&up->port.lock);
563
564 if (tty)
565 tty_flip_buffer_push(tty);
566
567 /* Channel B */
568 up = up->next;
569 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
570
571 spin_lock(&up->port.lock);
572 tty = NULL;
573 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
574 writeb(RES_H_IUS, &channel->control);
575 ZSDELAY();
576 ZS_WSYNC(channel);
577
578 if (r3 & CHBRxIP)
579 tty = sunzilog_receive_chars(up, channel);
580 if (r3 & CHBEXT)
581 sunzilog_status_handle(up, channel);
582 if (r3 & CHBTxIP)
583 sunzilog_transmit_chars(up, channel);
584 }
585 spin_unlock(&up->port.lock);
586
587 if (tty)
588 tty_flip_buffer_push(tty);
589
590 up = up->next;
591 }
592
593 return IRQ_HANDLED;
594 }
595
596 /* A convenient way to quickly get R0 status. The caller must _not_ hold the
597 * port lock, it is acquired here.
598 */
599 static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
600 {
601 struct zilog_channel __iomem *channel;
602 unsigned char status;
603
604 channel = ZILOG_CHANNEL_FROM_PORT(port);
605 status = readb(&channel->control);
606 ZSDELAY();
607
608 return status;
609 }
610
611 /* The port lock is not held. */
612 static unsigned int sunzilog_tx_empty(struct uart_port *port)
613 {
614 unsigned long flags;
615 unsigned char status;
616 unsigned int ret;
617
618 spin_lock_irqsave(&port->lock, flags);
619
620 status = sunzilog_read_channel_status(port);
621
622 spin_unlock_irqrestore(&port->lock, flags);
623
624 if (status & Tx_BUF_EMP)
625 ret = TIOCSER_TEMT;
626 else
627 ret = 0;
628
629 return ret;
630 }
631
632 /* The port lock is held and interrupts are disabled. */
633 static unsigned int sunzilog_get_mctrl(struct uart_port *port)
634 {
635 unsigned char status;
636 unsigned int ret;
637
638 status = sunzilog_read_channel_status(port);
639
640 ret = 0;
641 if (status & DCD)
642 ret |= TIOCM_CAR;
643 if (status & SYNC)
644 ret |= TIOCM_DSR;
645 if (status & CTS)
646 ret |= TIOCM_CTS;
647
648 return ret;
649 }
650
651 /* The port lock is held and interrupts are disabled. */
652 static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
653 {
654 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
655 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
656 unsigned char set_bits, clear_bits;
657
658 set_bits = clear_bits = 0;
659
660 if (mctrl & TIOCM_RTS)
661 set_bits |= RTS;
662 else
663 clear_bits |= RTS;
664 if (mctrl & TIOCM_DTR)
665 set_bits |= DTR;
666 else
667 clear_bits |= DTR;
668
669 /* NOTE: Not subject to 'transmitter active' rule. */
670 up->curregs[R5] |= set_bits;
671 up->curregs[R5] &= ~clear_bits;
672 write_zsreg(channel, R5, up->curregs[R5]);
673 }
674
675 /* The port lock is held and interrupts are disabled. */
676 static void sunzilog_stop_tx(struct uart_port *port)
677 {
678 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
679
680 up->flags |= SUNZILOG_FLAG_TX_STOPPED;
681 }
682
683 /* The port lock is held and interrupts are disabled. */
684 static void sunzilog_start_tx(struct uart_port *port)
685 {
686 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
687 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
688 unsigned char status;
689
690 up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
691 up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
692
693 status = readb(&channel->control);
694 ZSDELAY();
695
696 /* TX busy? Just wait for the TX done interrupt. */
697 if (!(status & Tx_BUF_EMP))
698 return;
699
700 /* Send the first character to jump-start the TX done
701 * IRQ sending engine.
702 */
703 if (port->x_char) {
704 writeb(port->x_char, &channel->data);
705 ZSDELAY();
706 ZS_WSYNC(channel);
707
708 port->icount.tx++;
709 port->x_char = 0;
710 } else {
711 struct circ_buf *xmit = &port->state->xmit;
712
713 writeb(xmit->buf[xmit->tail], &channel->data);
714 ZSDELAY();
715 ZS_WSYNC(channel);
716
717 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
718 port->icount.tx++;
719
720 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
721 uart_write_wakeup(&up->port);
722 }
723 }
724
725 /* The port lock is held. */
726 static void sunzilog_stop_rx(struct uart_port *port)
727 {
728 struct uart_sunzilog_port *up = UART_ZILOG(port);
729 struct zilog_channel __iomem *channel;
730
731 if (ZS_IS_CONS(up))
732 return;
733
734 channel = ZILOG_CHANNEL_FROM_PORT(port);
735
736 /* Disable all RX interrupts. */
737 up->curregs[R1] &= ~RxINT_MASK;
738 sunzilog_maybe_update_regs(up, channel);
739 }
740
741 /* The port lock is held. */
742 static void sunzilog_enable_ms(struct uart_port *port)
743 {
744 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
745 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
746 unsigned char new_reg;
747
748 new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
749 if (new_reg != up->curregs[R15]) {
750 up->curregs[R15] = new_reg;
751
752 /* NOTE: Not subject to 'transmitter active' rule. */
753 write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
754 }
755 }
756
757 /* The port lock is not held. */
758 static void sunzilog_break_ctl(struct uart_port *port, int break_state)
759 {
760 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
761 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
762 unsigned char set_bits, clear_bits, new_reg;
763 unsigned long flags;
764
765 set_bits = clear_bits = 0;
766
767 if (break_state)
768 set_bits |= SND_BRK;
769 else
770 clear_bits |= SND_BRK;
771
772 spin_lock_irqsave(&port->lock, flags);
773
774 new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
775 if (new_reg != up->curregs[R5]) {
776 up->curregs[R5] = new_reg;
777
778 /* NOTE: Not subject to 'transmitter active' rule. */
779 write_zsreg(channel, R5, up->curregs[R5]);
780 }
781
782 spin_unlock_irqrestore(&port->lock, flags);
783 }
784
785 static void __sunzilog_startup(struct uart_sunzilog_port *up)
786 {
787 struct zilog_channel __iomem *channel;
788
789 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
790 up->prev_status = readb(&channel->control);
791
792 /* Enable receiver and transmitter. */
793 up->curregs[R3] |= RxENAB;
794 up->curregs[R5] |= TxENAB;
795
796 up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
797 sunzilog_maybe_update_regs(up, channel);
798 }
799
800 static int sunzilog_startup(struct uart_port *port)
801 {
802 struct uart_sunzilog_port *up = UART_ZILOG(port);
803 unsigned long flags;
804
805 if (ZS_IS_CONS(up))
806 return 0;
807
808 spin_lock_irqsave(&port->lock, flags);
809 __sunzilog_startup(up);
810 spin_unlock_irqrestore(&port->lock, flags);
811 return 0;
812 }
813
814 /*
815 * The test for ZS_IS_CONS is explained by the following e-mail:
816 *****
817 * From: Russell King <rmk@arm.linux.org.uk>
818 * Date: Sun, 8 Dec 2002 10:18:38 +0000
819 *
820 * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
821 * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
822 * > and I noticed that something is not right with reference
823 * > counting in this case. It seems that when the console
824 * > is open by kernel initially, this is not accounted
825 * > as an open, and uart_startup is not called.
826 *
827 * That is correct. We are unable to call uart_startup when the serial
828 * console is initialised because it may need to allocate memory (as
829 * request_irq does) and the memory allocators may not have been
830 * initialised.
831 *
832 * 1. initialise the port into a state where it can send characters in the
833 * console write method.
834 *
835 * 2. don't do the actual hardware shutdown in your shutdown() method (but
836 * do the normal software shutdown - ie, free irqs etc)
837 *****
838 */
839 static void sunzilog_shutdown(struct uart_port *port)
840 {
841 struct uart_sunzilog_port *up = UART_ZILOG(port);
842 struct zilog_channel __iomem *channel;
843 unsigned long flags;
844
845 if (ZS_IS_CONS(up))
846 return;
847
848 spin_lock_irqsave(&port->lock, flags);
849
850 channel = ZILOG_CHANNEL_FROM_PORT(port);
851
852 /* Disable receiver and transmitter. */
853 up->curregs[R3] &= ~RxENAB;
854 up->curregs[R5] &= ~TxENAB;
855
856 /* Disable all interrupts and BRK assertion. */
857 up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
858 up->curregs[R5] &= ~SND_BRK;
859 sunzilog_maybe_update_regs(up, channel);
860
861 spin_unlock_irqrestore(&port->lock, flags);
862 }
863
864 /* Shared by TTY driver and serial console setup. The port lock is held
865 * and local interrupts are disabled.
866 */
867 static void
868 sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
869 unsigned int iflag, int brg)
870 {
871
872 up->curregs[R10] = NRZ;
873 up->curregs[R11] = TCBR | RCBR;
874
875 /* Program BAUD and clock source. */
876 up->curregs[R4] &= ~XCLK_MASK;
877 up->curregs[R4] |= X16CLK;
878 up->curregs[R12] = brg & 0xff;
879 up->curregs[R13] = (brg >> 8) & 0xff;
880 up->curregs[R14] = BRSRC | BRENAB;
881
882 /* Character size, stop bits, and parity. */
883 up->curregs[R3] &= ~RxN_MASK;
884 up->curregs[R5] &= ~TxN_MASK;
885 switch (cflag & CSIZE) {
886 case CS5:
887 up->curregs[R3] |= Rx5;
888 up->curregs[R5] |= Tx5;
889 up->parity_mask = 0x1f;
890 break;
891 case CS6:
892 up->curregs[R3] |= Rx6;
893 up->curregs[R5] |= Tx6;
894 up->parity_mask = 0x3f;
895 break;
896 case CS7:
897 up->curregs[R3] |= Rx7;
898 up->curregs[R5] |= Tx7;
899 up->parity_mask = 0x7f;
900 break;
901 case CS8:
902 default:
903 up->curregs[R3] |= Rx8;
904 up->curregs[R5] |= Tx8;
905 up->parity_mask = 0xff;
906 break;
907 };
908 up->curregs[R4] &= ~0x0c;
909 if (cflag & CSTOPB)
910 up->curregs[R4] |= SB2;
911 else
912 up->curregs[R4] |= SB1;
913 if (cflag & PARENB)
914 up->curregs[R4] |= PAR_ENAB;
915 else
916 up->curregs[R4] &= ~PAR_ENAB;
917 if (!(cflag & PARODD))
918 up->curregs[R4] |= PAR_EVEN;
919 else
920 up->curregs[R4] &= ~PAR_EVEN;
921
922 up->port.read_status_mask = Rx_OVR;
923 if (iflag & INPCK)
924 up->port.read_status_mask |= CRC_ERR | PAR_ERR;
925 if (iflag & (BRKINT | PARMRK))
926 up->port.read_status_mask |= BRK_ABRT;
927
928 up->port.ignore_status_mask = 0;
929 if (iflag & IGNPAR)
930 up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
931 if (iflag & IGNBRK) {
932 up->port.ignore_status_mask |= BRK_ABRT;
933 if (iflag & IGNPAR)
934 up->port.ignore_status_mask |= Rx_OVR;
935 }
936
937 if ((cflag & CREAD) == 0)
938 up->port.ignore_status_mask = 0xff;
939 }
940
941 /* The port lock is not held. */
942 static void
943 sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
944 struct ktermios *old)
945 {
946 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
947 unsigned long flags;
948 int baud, brg;
949
950 baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
951
952 spin_lock_irqsave(&up->port.lock, flags);
953
954 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
955
956 sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
957
958 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
959 up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
960 else
961 up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
962
963 up->cflag = termios->c_cflag;
964
965 sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
966
967 uart_update_timeout(port, termios->c_cflag, baud);
968
969 spin_unlock_irqrestore(&up->port.lock, flags);
970 }
971
972 static const char *sunzilog_type(struct uart_port *port)
973 {
974 struct uart_sunzilog_port *up = UART_ZILOG(port);
975
976 return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs";
977 }
978
979 /* We do not request/release mappings of the registers here, this
980 * happens at early serial probe time.
981 */
982 static void sunzilog_release_port(struct uart_port *port)
983 {
984 }
985
986 static int sunzilog_request_port(struct uart_port *port)
987 {
988 return 0;
989 }
990
991 /* These do not need to do anything interesting either. */
992 static void sunzilog_config_port(struct uart_port *port, int flags)
993 {
994 }
995
996 /* We do not support letting the user mess with the divisor, IRQ, etc. */
997 static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
998 {
999 return -EINVAL;
1000 }
1001
1002 #ifdef CONFIG_CONSOLE_POLL
1003 static int sunzilog_get_poll_char(struct uart_port *port)
1004 {
1005 unsigned char ch, r1;
1006 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
1007 struct zilog_channel __iomem *channel
1008 = ZILOG_CHANNEL_FROM_PORT(&up->port);
1009
1010
1011 r1 = read_zsreg(channel, R1);
1012 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
1013 writeb(ERR_RES, &channel->control);
1014 ZSDELAY();
1015 ZS_WSYNC(channel);
1016 }
1017
1018 ch = readb(&channel->control);
1019 ZSDELAY();
1020
1021 /* This funny hack depends upon BRK_ABRT not interfering
1022 * with the other bits we care about in R1.
1023 */
1024 if (ch & BRK_ABRT)
1025 r1 |= BRK_ABRT;
1026
1027 if (!(ch & Rx_CH_AV))
1028 return NO_POLL_CHAR;
1029
1030 ch = readb(&channel->data);
1031 ZSDELAY();
1032
1033 ch &= up->parity_mask;
1034 return ch;
1035 }
1036
1037 static void sunzilog_put_poll_char(struct uart_port *port,
1038 unsigned char ch)
1039 {
1040 struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port;
1041
1042 sunzilog_putchar(&up->port, ch);
1043 }
1044 #endif /* CONFIG_CONSOLE_POLL */
1045
1046 static struct uart_ops sunzilog_pops = {
1047 .tx_empty = sunzilog_tx_empty,
1048 .set_mctrl = sunzilog_set_mctrl,
1049 .get_mctrl = sunzilog_get_mctrl,
1050 .stop_tx = sunzilog_stop_tx,
1051 .start_tx = sunzilog_start_tx,
1052 .stop_rx = sunzilog_stop_rx,
1053 .enable_ms = sunzilog_enable_ms,
1054 .break_ctl = sunzilog_break_ctl,
1055 .startup = sunzilog_startup,
1056 .shutdown = sunzilog_shutdown,
1057 .set_termios = sunzilog_set_termios,
1058 .type = sunzilog_type,
1059 .release_port = sunzilog_release_port,
1060 .request_port = sunzilog_request_port,
1061 .config_port = sunzilog_config_port,
1062 .verify_port = sunzilog_verify_port,
1063 #ifdef CONFIG_CONSOLE_POLL
1064 .poll_get_char = sunzilog_get_poll_char,
1065 .poll_put_char = sunzilog_put_poll_char,
1066 #endif
1067 };
1068
1069 static int uart_chip_count;
1070 static struct uart_sunzilog_port *sunzilog_port_table;
1071 static struct zilog_layout __iomem **sunzilog_chip_regs;
1072
1073 static struct uart_sunzilog_port *sunzilog_irq_chain;
1074
1075 static struct uart_driver sunzilog_reg = {
1076 .owner = THIS_MODULE,
1077 .driver_name = "sunzilog",
1078 .dev_name = "ttyS",
1079 .major = TTY_MAJOR,
1080 };
1081
1082 static int __init sunzilog_alloc_tables(int num_sunzilog)
1083 {
1084 struct uart_sunzilog_port *up;
1085 unsigned long size;
1086 int num_channels = num_sunzilog * 2;
1087 int i;
1088
1089 size = num_channels * sizeof(struct uart_sunzilog_port);
1090 sunzilog_port_table = kzalloc(size, GFP_KERNEL);
1091 if (!sunzilog_port_table)
1092 return -ENOMEM;
1093
1094 for (i = 0; i < num_channels; i++) {
1095 up = &sunzilog_port_table[i];
1096
1097 spin_lock_init(&up->port.lock);
1098
1099 if (i == 0)
1100 sunzilog_irq_chain = up;
1101
1102 if (i < num_channels - 1)
1103 up->next = up + 1;
1104 else
1105 up->next = NULL;
1106 }
1107
1108 size = num_sunzilog * sizeof(struct zilog_layout __iomem *);
1109 sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
1110 if (!sunzilog_chip_regs) {
1111 kfree(sunzilog_port_table);
1112 sunzilog_irq_chain = NULL;
1113 return -ENOMEM;
1114 }
1115
1116 return 0;
1117 }
1118
1119 static void sunzilog_free_tables(void)
1120 {
1121 kfree(sunzilog_port_table);
1122 sunzilog_irq_chain = NULL;
1123 kfree(sunzilog_chip_regs);
1124 }
1125
1126 #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
1127
1128 static void sunzilog_putchar(struct uart_port *port, int ch)
1129 {
1130 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
1131 int loops = ZS_PUT_CHAR_MAX_DELAY;
1132
1133 /* This is a timed polling loop so do not switch the explicit
1134 * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM
1135 */
1136 do {
1137 unsigned char val = readb(&channel->control);
1138 if (val & Tx_BUF_EMP) {
1139 ZSDELAY();
1140 break;
1141 }
1142 udelay(5);
1143 } while (--loops);
1144
1145 writeb(ch, &channel->data);
1146 ZSDELAY();
1147 ZS_WSYNC(channel);
1148 }
1149
1150 #ifdef CONFIG_SERIO
1151
1152 static DEFINE_SPINLOCK(sunzilog_serio_lock);
1153
1154 static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
1155 {
1156 struct uart_sunzilog_port *up = serio->port_data;
1157 unsigned long flags;
1158
1159 spin_lock_irqsave(&sunzilog_serio_lock, flags);
1160
1161 sunzilog_putchar(&up->port, ch);
1162
1163 spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1164
1165 return 0;
1166 }
1167
1168 static int sunzilog_serio_open(struct serio *serio)
1169 {
1170 struct uart_sunzilog_port *up = serio->port_data;
1171 unsigned long flags;
1172 int ret;
1173
1174 spin_lock_irqsave(&sunzilog_serio_lock, flags);
1175 if (!up->serio_open) {
1176 up->serio_open = 1;
1177 ret = 0;
1178 } else
1179 ret = -EBUSY;
1180 spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1181
1182 return ret;
1183 }
1184
1185 static void sunzilog_serio_close(struct serio *serio)
1186 {
1187 struct uart_sunzilog_port *up = serio->port_data;
1188 unsigned long flags;
1189
1190 spin_lock_irqsave(&sunzilog_serio_lock, flags);
1191 up->serio_open = 0;
1192 spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1193 }
1194
1195 #endif /* CONFIG_SERIO */
1196
1197 #ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
1198 static void
1199 sunzilog_console_write(struct console *con, const char *s, unsigned int count)
1200 {
1201 struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
1202 unsigned long flags;
1203 int locked = 1;
1204
1205 local_irq_save(flags);
1206 if (up->port.sysrq) {
1207 locked = 0;
1208 } else if (oops_in_progress) {
1209 locked = spin_trylock(&up->port.lock);
1210 } else
1211 spin_lock(&up->port.lock);
1212
1213 uart_console_write(&up->port, s, count, sunzilog_putchar);
1214 udelay(2);
1215
1216 if (locked)
1217 spin_unlock(&up->port.lock);
1218 local_irq_restore(flags);
1219 }
1220
1221 static int __init sunzilog_console_setup(struct console *con, char *options)
1222 {
1223 struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
1224 unsigned long flags;
1225 int baud, brg;
1226
1227 if (up->port.type != PORT_SUNZILOG)
1228 return -1;
1229
1230 printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
1231 (sunzilog_reg.minor - 64) + con->index, con->index);
1232
1233 /* Get firmware console settings. */
1234 sunserial_console_termios(con, up->port.dev->of_node);
1235
1236 /* Firmware console speed is limited to 150-->38400 baud so
1237 * this hackish cflag thing is OK.
1238 */
1239 switch (con->cflag & CBAUD) {
1240 case B150: baud = 150; break;
1241 case B300: baud = 300; break;
1242 case B600: baud = 600; break;
1243 case B1200: baud = 1200; break;
1244 case B2400: baud = 2400; break;
1245 case B4800: baud = 4800; break;
1246 default: case B9600: baud = 9600; break;
1247 case B19200: baud = 19200; break;
1248 case B38400: baud = 38400; break;
1249 };
1250
1251 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1252
1253 spin_lock_irqsave(&up->port.lock, flags);
1254
1255 up->curregs[R15] |= BRKIE;
1256 sunzilog_convert_to_zs(up, con->cflag, 0, brg);
1257
1258 sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
1259 __sunzilog_startup(up);
1260
1261 spin_unlock_irqrestore(&up->port.lock, flags);
1262
1263 return 0;
1264 }
1265
1266 static struct console sunzilog_console_ops = {
1267 .name = "ttyS",
1268 .write = sunzilog_console_write,
1269 .device = uart_console_device,
1270 .setup = sunzilog_console_setup,
1271 .flags = CON_PRINTBUFFER,
1272 .index = -1,
1273 .data = &sunzilog_reg,
1274 };
1275
1276 static inline struct console *SUNZILOG_CONSOLE(void)
1277 {
1278 return &sunzilog_console_ops;
1279 }
1280
1281 #else
1282 #define SUNZILOG_CONSOLE() (NULL)
1283 #endif
1284
1285 static void sunzilog_init_kbdms(struct uart_sunzilog_port *up)
1286 {
1287 int baud, brg;
1288
1289 if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
1290 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1291 baud = 1200;
1292 } else {
1293 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1294 baud = 4800;
1295 }
1296
1297 up->curregs[R15] |= BRKIE;
1298 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1299 sunzilog_convert_to_zs(up, up->cflag, 0, brg);
1300 sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
1301 __sunzilog_startup(up);
1302 }
1303
1304 #ifdef CONFIG_SERIO
1305 static void sunzilog_register_serio(struct uart_sunzilog_port *up)
1306 {
1307 struct serio *serio = &up->serio;
1308
1309 serio->port_data = up;
1310
1311 serio->id.type = SERIO_RS232;
1312 if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
1313 serio->id.proto = SERIO_SUNKBD;
1314 strlcpy(serio->name, "zskbd", sizeof(serio->name));
1315 } else {
1316 serio->id.proto = SERIO_SUN;
1317 serio->id.extra = 1;
1318 strlcpy(serio->name, "zsms", sizeof(serio->name));
1319 }
1320 strlcpy(serio->phys,
1321 ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
1322 "zs/serio0" : "zs/serio1"),
1323 sizeof(serio->phys));
1324
1325 serio->write = sunzilog_serio_write;
1326 serio->open = sunzilog_serio_open;
1327 serio->close = sunzilog_serio_close;
1328 serio->dev.parent = up->port.dev;
1329
1330 serio_register_port(serio);
1331 }
1332 #endif
1333
1334 static void sunzilog_init_hw(struct uart_sunzilog_port *up)
1335 {
1336 struct zilog_channel __iomem *channel;
1337 unsigned long flags;
1338 int baud, brg;
1339
1340 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1341
1342 spin_lock_irqsave(&up->port.lock, flags);
1343 if (ZS_IS_CHANNEL_A(up)) {
1344 write_zsreg(channel, R9, FHWRES);
1345 ZSDELAY_LONG();
1346 (void) read_zsreg(channel, R0);
1347 }
1348
1349 if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
1350 SUNZILOG_FLAG_CONS_MOUSE)) {
1351 up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
1352 up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
1353 up->curregs[R3] = RxENAB | Rx8;
1354 up->curregs[R5] = TxENAB | Tx8;
1355 up->curregs[R6] = 0x00; /* SDLC Address */
1356 up->curregs[R7] = 0x7E; /* SDLC Flag */
1357 up->curregs[R9] = NV;
1358 up->curregs[R7p] = 0x00;
1359 sunzilog_init_kbdms(up);
1360 /* Only enable interrupts if an ISR handler available */
1361 if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
1362 up->curregs[R9] |= MIE;
1363 write_zsreg(channel, R9, up->curregs[R9]);
1364 } else {
1365 /* Normal serial TTY. */
1366 up->parity_mask = 0xff;
1367 up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
1368 up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
1369 up->curregs[R3] = RxENAB | Rx8;
1370 up->curregs[R5] = TxENAB | Tx8;
1371 up->curregs[R6] = 0x00; /* SDLC Address */
1372 up->curregs[R7] = 0x7E; /* SDLC Flag */
1373 up->curregs[R9] = NV;
1374 up->curregs[R10] = NRZ;
1375 up->curregs[R11] = TCBR | RCBR;
1376 baud = 9600;
1377 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1378 up->curregs[R12] = (brg & 0xff);
1379 up->curregs[R13] = (brg >> 8) & 0xff;
1380 up->curregs[R14] = BRSRC | BRENAB;
1381 up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */
1382 up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL;
1383 if (__load_zsregs(channel, up->curregs)) {
1384 up->flags |= SUNZILOG_FLAG_ESCC;
1385 }
1386 /* Only enable interrupts if an ISR handler available */
1387 if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
1388 up->curregs[R9] |= MIE;
1389 write_zsreg(channel, R9, up->curregs[R9]);
1390 }
1391
1392 spin_unlock_irqrestore(&up->port.lock, flags);
1393
1394 #ifdef CONFIG_SERIO
1395 if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
1396 SUNZILOG_FLAG_CONS_MOUSE))
1397 sunzilog_register_serio(up);
1398 #endif
1399 }
1400
1401 static int zilog_irq;
1402
1403 static int zs_probe(struct platform_device *op)
1404 {
1405 static int kbm_inst, uart_inst;
1406 int inst;
1407 struct uart_sunzilog_port *up;
1408 struct zilog_layout __iomem *rp;
1409 int keyboard_mouse = 0;
1410 int err;
1411
1412 if (of_find_property(op->dev.of_node, "keyboard", NULL))
1413 keyboard_mouse = 1;
1414
1415 /* uarts must come before keyboards/mice */
1416 if (keyboard_mouse)
1417 inst = uart_chip_count + kbm_inst;
1418 else
1419 inst = uart_inst;
1420
1421 sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
1422 sizeof(struct zilog_layout),
1423 "zs");
1424 if (!sunzilog_chip_regs[inst])
1425 return -ENOMEM;
1426
1427 rp = sunzilog_chip_regs[inst];
1428
1429 if (!zilog_irq)
1430 zilog_irq = op->archdata.irqs[0];
1431
1432 up = &sunzilog_port_table[inst * 2];
1433
1434 /* Channel A */
1435 up[0].port.mapbase = op->resource[0].start + 0x00;
1436 up[0].port.membase = (void __iomem *) &rp->channelA;
1437 up[0].port.iotype = UPIO_MEM;
1438 up[0].port.irq = op->archdata.irqs[0];
1439 up[0].port.uartclk = ZS_CLOCK;
1440 up[0].port.fifosize = 1;
1441 up[0].port.ops = &sunzilog_pops;
1442 up[0].port.type = PORT_SUNZILOG;
1443 up[0].port.flags = 0;
1444 up[0].port.line = (inst * 2) + 0;
1445 up[0].port.dev = &op->dev;
1446 up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
1447 if (keyboard_mouse)
1448 up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
1449 sunzilog_init_hw(&up[0]);
1450
1451 /* Channel B */
1452 up[1].port.mapbase = op->resource[0].start + 0x04;
1453 up[1].port.membase = (void __iomem *) &rp->channelB;
1454 up[1].port.iotype = UPIO_MEM;
1455 up[1].port.irq = op->archdata.irqs[0];
1456 up[1].port.uartclk = ZS_CLOCK;
1457 up[1].port.fifosize = 1;
1458 up[1].port.ops = &sunzilog_pops;
1459 up[1].port.type = PORT_SUNZILOG;
1460 up[1].port.flags = 0;
1461 up[1].port.line = (inst * 2) + 1;
1462 up[1].port.dev = &op->dev;
1463 up[1].flags |= 0;
1464 if (keyboard_mouse)
1465 up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
1466 sunzilog_init_hw(&up[1]);
1467
1468 if (!keyboard_mouse) {
1469 if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
1470 &sunzilog_reg, up[0].port.line,
1471 false))
1472 up->flags |= SUNZILOG_FLAG_IS_CONS;
1473 err = uart_add_one_port(&sunzilog_reg, &up[0].port);
1474 if (err) {
1475 of_iounmap(&op->resource[0],
1476 rp, sizeof(struct zilog_layout));
1477 return err;
1478 }
1479 if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
1480 &sunzilog_reg, up[1].port.line,
1481 false))
1482 up->flags |= SUNZILOG_FLAG_IS_CONS;
1483 err = uart_add_one_port(&sunzilog_reg, &up[1].port);
1484 if (err) {
1485 uart_remove_one_port(&sunzilog_reg, &up[0].port);
1486 of_iounmap(&op->resource[0],
1487 rp, sizeof(struct zilog_layout));
1488 return err;
1489 }
1490 uart_inst++;
1491 } else {
1492 printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) "
1493 "is a %s\n",
1494 dev_name(&op->dev),
1495 (unsigned long long) up[0].port.mapbase,
1496 op->archdata.irqs[0], sunzilog_type(&up[0].port));
1497 printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
1498 "is a %s\n",
1499 dev_name(&op->dev),
1500 (unsigned long long) up[1].port.mapbase,
1501 op->archdata.irqs[0], sunzilog_type(&up[1].port));
1502 kbm_inst++;
1503 }
1504
1505 dev_set_drvdata(&op->dev, &up[0]);
1506
1507 return 0;
1508 }
1509
1510 static void zs_remove_one(struct uart_sunzilog_port *up)
1511 {
1512 if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
1513 #ifdef CONFIG_SERIO
1514 serio_unregister_port(&up->serio);
1515 #endif
1516 } else
1517 uart_remove_one_port(&sunzilog_reg, &up->port);
1518 }
1519
1520 static int zs_remove(struct platform_device *op)
1521 {
1522 struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
1523 struct zilog_layout __iomem *regs;
1524
1525 zs_remove_one(&up[0]);
1526 zs_remove_one(&up[1]);
1527
1528 regs = sunzilog_chip_regs[up[0].port.line / 2];
1529 of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
1530
1531 dev_set_drvdata(&op->dev, NULL);
1532
1533 return 0;
1534 }
1535
1536 static const struct of_device_id zs_match[] = {
1537 {
1538 .name = "zs",
1539 },
1540 {},
1541 };
1542 MODULE_DEVICE_TABLE(of, zs_match);
1543
1544 static struct platform_driver zs_driver = {
1545 .driver = {
1546 .name = "zs",
1547 .owner = THIS_MODULE,
1548 .of_match_table = zs_match,
1549 },
1550 .probe = zs_probe,
1551 .remove = zs_remove,
1552 };
1553
1554 static int __init sunzilog_init(void)
1555 {
1556 struct device_node *dp;
1557 int err;
1558 int num_keybms = 0;
1559 int num_sunzilog = 0;
1560
1561 for_each_node_by_name(dp, "zs") {
1562 num_sunzilog++;
1563 if (of_find_property(dp, "keyboard", NULL))
1564 num_keybms++;
1565 }
1566
1567 if (num_sunzilog) {
1568 err = sunzilog_alloc_tables(num_sunzilog);
1569 if (err)
1570 goto out;
1571
1572 uart_chip_count = num_sunzilog - num_keybms;
1573
1574 err = sunserial_register_minors(&sunzilog_reg,
1575 uart_chip_count * 2);
1576 if (err)
1577 goto out_free_tables;
1578 }
1579
1580 err = platform_driver_register(&zs_driver);
1581 if (err)
1582 goto out_unregister_uart;
1583
1584 if (zilog_irq) {
1585 struct uart_sunzilog_port *up = sunzilog_irq_chain;
1586 err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
1587 "zs", sunzilog_irq_chain);
1588 if (err)
1589 goto out_unregister_driver;
1590
1591 /* Enable Interrupts */
1592 while (up) {
1593 struct zilog_channel __iomem *channel;
1594
1595 /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */
1596 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1597 up->flags |= SUNZILOG_FLAG_ISR_HANDLER;
1598 up->curregs[R9] |= MIE;
1599 write_zsreg(channel, R9, up->curregs[R9]);
1600 up = up->next;
1601 }
1602 }
1603
1604 out:
1605 return err;
1606
1607 out_unregister_driver:
1608 platform_driver_unregister(&zs_driver);
1609
1610 out_unregister_uart:
1611 if (num_sunzilog) {
1612 sunserial_unregister_minors(&sunzilog_reg, num_sunzilog);
1613 sunzilog_reg.cons = NULL;
1614 }
1615
1616 out_free_tables:
1617 sunzilog_free_tables();
1618 goto out;
1619 }
1620
1621 static void __exit sunzilog_exit(void)
1622 {
1623 platform_driver_unregister(&zs_driver);
1624
1625 if (zilog_irq) {
1626 struct uart_sunzilog_port *up = sunzilog_irq_chain;
1627
1628 /* Disable Interrupts */
1629 while (up) {
1630 struct zilog_channel __iomem *channel;
1631
1632 /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */
1633 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1634 up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER;
1635 up->curregs[R9] &= ~MIE;
1636 write_zsreg(channel, R9, up->curregs[R9]);
1637 up = up->next;
1638 }
1639
1640 free_irq(zilog_irq, sunzilog_irq_chain);
1641 zilog_irq = 0;
1642 }
1643
1644 if (sunzilog_reg.nr) {
1645 sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr);
1646 sunzilog_free_tables();
1647 }
1648 }
1649
1650 module_init(sunzilog_init);
1651 module_exit(sunzilog_exit);
1652
1653 MODULE_AUTHOR("David S. Miller");
1654 MODULE_DESCRIPTION("Sun Zilog serial port driver");
1655 MODULE_VERSION("2.0");
1656 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.078906 seconds and 6 git commands to generate.