include/linux/amba/bus.h

   1 /*
   2  *  linux/include/amba/bus.h
   3  *
   4  *  This device type deals with ARM PrimeCells and anything else that
   5  *  presents a proper CID (0xB105F00D) at the end of the I/O register
   6  *  region or that is derived from a PrimeCell.
   7  *
   8  *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14 #ifndef ASMARM_AMBA_H
  15 #define ASMARM_AMBA_H
  16
  17 #include <linux/clk.h>
  18 #include <linux/device.h>
  19 #include <linux/mod_devicetable.h>
  20 #include <linux/err.h>
  21 #include <linux/resource.h>
  22 #include <linux/regulator/consumer.h>
  23
  24 #define AMBA_NR_IRQS    9
  25 #define AMBA_CID        0xb105f00d
  26 #define CORESIGHT_CID   0xb105900d
  27
  28 struct clk;
  29
  30 struct amba_device {
  31         struct device           dev;
  32         struct resource         res;
  33         struct clk              *pclk;
  34         unsigned int            periphid;
  35         unsigned int            irq[AMBA_NR_IRQS];
  36         char                    *driver_override;
  37 };
  38
  39 struct amba_driver {
  40         struct device_driver    drv;
  41         int                     (*probe)(struct amba_device *, const struct amba_id *);
  42         int                     (*remove)(struct amba_device *);
  43         void                    (*shutdown)(struct amba_device *);
  44         const struct amba_id    *id_table;
  45 };
  46
  47 /*
  48  * Constants for the designer field of the Peripheral ID register. When bit 7
  49  * is set to '1', bits [6:0] should be the JEP106 manufacturer identity code.
  50  */
  51 enum amba_vendor {
  52         AMBA_VENDOR_ARM = 0x41,
  53         AMBA_VENDOR_ST = 0x80,
  54         AMBA_VENDOR_QCOM = 0x51,
  55         AMBA_VENDOR_LSI = 0xb6,
  56 };
  57
  58 extern struct bus_type amba_bustype;
  59
  60 #define to_amba_device(d)       container_of(d, struct amba_device, dev)
  61
  62 #define amba_get_drvdata(d)     dev_get_drvdata(&d->dev)
  63 #define amba_set_drvdata(d,p)   dev_set_drvdata(&d->dev, p)
  64
  65 int amba_driver_register(struct amba_driver *);
  66 void amba_driver_unregister(struct amba_driver *);
  67 struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
  68 void amba_device_put(struct amba_device *);
  69 int amba_device_add(struct amba_device *, struct resource *);
  70 int amba_device_register(struct amba_device *, struct resource *);
  71 struct amba_device *amba_apb_device_add(struct device *parent, const char *name,
  72                                         resource_size_t base, size_t size,
  73                                         int irq1, int irq2, void *pdata,
  74                                         unsigned int periphid);
  75 struct amba_device *amba_ahb_device_add(struct device *parent, const char *name,
  76                                         resource_size_t base, size_t size,
  77                                         int irq1, int irq2, void *pdata,
  78                                         unsigned int periphid);
  79 struct amba_device *
  80 amba_apb_device_add_res(struct device *parent, const char *name,
  81                         resource_size_t base, size_t size, int irq1,
  82                         int irq2, void *pdata, unsigned int periphid,
  83                         struct resource *resbase);
  84 struct amba_device *
  85 amba_ahb_device_add_res(struct device *parent, const char *name,
  86                         resource_size_t base, size_t size, int irq1,
  87                         int irq2, void *pdata, unsigned int periphid,
  88                         struct resource *resbase);
  89 void amba_device_unregister(struct amba_device *);
  90 struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
  91 int amba_request_regions(struct amba_device *, const char *);
  92 void amba_release_regions(struct amba_device *);
  93
  94 static inline int amba_pclk_enable(struct amba_device *dev)
  95 {
  96         return clk_enable(dev->pclk);
  97 }
  98
  99 static inline void amba_pclk_disable(struct amba_device *dev)
 100 {
 101         clk_disable(dev->pclk);
 102 }
 103
 104 static inline int amba_pclk_prepare(struct amba_device *dev)
 105 {
 106         return clk_prepare(dev->pclk);
 107 }
 108
 109 static inline void amba_pclk_unprepare(struct amba_device *dev)
 110 {
 111         clk_unprepare(dev->pclk);
 112 }
 113
 114 /* Some drivers don't use the struct amba_device */
 115 #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
 116 #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
 117 #define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
 118 #define AMBA_PART_BITS(a) ((a) & 0xfff)
 119
 120 #define amba_config(d)  AMBA_CONFIG_BITS((d)->periphid)
 121 #define amba_rev(d)     AMBA_REV_BITS((d)->periphid)
 122 #define amba_manf(d)    AMBA_MANF_BITS((d)->periphid)
 123 #define amba_part(d)    AMBA_PART_BITS((d)->periphid)
 124
 125 #define __AMBA_DEV(busid, data, mask)                           \
 126         {                                                       \
 127                 .coherent_dma_mask = mask,                      \
 128                 .init_name = busid,                             \
 129                 .platform_data = data,                          \
 130         }
 131
 132 /*
 133  * APB devices do not themselves have the ability to address memory,
 134  * so DMA masks should be zero (much like USB peripheral devices.)
 135  * The DMA controller DMA masks should be used instead (much like
 136  * USB host controllers in conventional PCs.)
 137  */
 138 #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data)      \
 139 struct amba_device name##_device = {                            \
 140         .dev = __AMBA_DEV(busid, data, 0),                      \
 141         .res = DEFINE_RES_MEM(base, SZ_4K),                     \
 142         .irq = irqs,                                            \
 143         .periphid = id,                                         \
 144 }
 145
 146 /*
 147  * AHB devices are DMA capable, so set their DMA masks
 148  */
 149 #define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data)      \
 150 struct amba_device name##_device = {                            \
 151         .dev = __AMBA_DEV(busid, data, ~0ULL),                  \
 152         .res = DEFINE_RES_MEM(base, SZ_4K),                     \
 153         .irq = irqs,                                            \
 154         .periphid = id,                                         \
 155 }
 156
 157 /*
 158  * module_amba_driver() - Helper macro for drivers that don't do anything
 159  * special in module init/exit.  This eliminates a lot of boilerplate.  Each
 160  * module may only use this macro once, and calling it replaces module_init()
 161  * and module_exit()
 162  */
 163 #define module_amba_driver(__amba_drv) \
 164         module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
 165
 166 /*
 167  * builtin_amba_driver() - Helper macro for drivers that don't do anything
 168  * special in driver initcall.  This eliminates a lot of boilerplate.  Each
 169  * driver may only use this macro once, and calling it replaces the instance
 170  * device_initcall().
 171  */
 172 #define builtin_amba_driver(__amba_drv) \
 173         builtin_driver(__amba_drv, amba_driver_register)
 174
 175 #endif