-Common Trace Format (CTF) Specification (v1.8.2)
-
-Mathieu Desnoyers, EfficiOS Inc.
-
-The goal of the present document is to specify a trace format that suits the
-needs of the embedded, telecom, high-performance and kernel communities. It is
-based on the Common Trace Format Requirements (v1.4) document. It is designed to
-allow traces to be natively generated by the Linux kernel, Linux user-space
-applications written in C/C++, and hardware components. One major element of
-CTF is the Trace Stream Description Language (TSDL) which flexibility
-enables description of various binary trace stream layouts.
-
-The latest version of this document can be found at:
-
- git tree: git://git.efficios.com/ctf.git
- gitweb: http://git.efficios.com/?p=ctf.git
-
-A reference implementation of a library to read and write this trace format is
-being implemented within the BabelTrace project, a converter between trace
-formats. The development tree is available at:
-
- git tree: git://git.efficios.com/babeltrace.git
- gitweb: http://git.efficios.com/?p=babeltrace.git
-
-The CE Workgroup of the Linux Foundation, Ericsson, and EfficiOS have
-sponsored this work.
-
-
-Table of Contents
-
-1. Preliminary definitions
-2. High-level representation of a trace
-3. Event stream
-4. Types
- 4.1 Basic types
- 4.1.1 Type inheritance
- 4.1.2 Alignment
- 4.1.3 Byte order
- 4.1.4 Size
- 4.1.5 Integers
- 4.1.6 GNU/C bitfields
- 4.1.7 Floating point
- 4.1.8 Enumerations
- 4.2 Compound types
- 4.2.1 Structures
- 4.2.2 Variants (Discriminated/Tagged Unions)
- 4.2.3 Arrays
- 4.2.4 Sequences
- 4.2.5 Strings
-5. Event Packet Header
- 5.1 Event Packet Header Description
- 5.2 Event Packet Context Description
-6. Event Structure
- 6.1 Event Header
- 6.1.1 Type 1 - Few event IDs
- 6.1.2 Type 2 - Many event IDs
- 6.2 Stream Event Context and Event Context
- 6.3 Event Payload
- 6.3.1 Padding
- 6.3.2 Alignment
-7. Trace Stream Description Language (TSDL)
- 7.1 Meta-data
- 7.2 Declaration vs Definition
- 7.3 TSDL Scopes
- 7.3.1 Lexical Scope
- 7.3.2 Static and Dynamic Scopes
- 7.4 TSDL Examples
-8. Clocks
-
-
-1. Preliminary definitions
-
- - Event Trace: An ordered sequence of events.
- - Event Stream: An ordered sequence of events, containing a subset of the
- trace event types.
- - Event Packet: A sequence of physically contiguous events within an event
- stream.
- - Event: This is the basic entry in a trace. (aka: a trace record).
- - An event identifier (ID) relates to the class (a type) of event within
- an event stream.
- e.g. event: irq_entry.
- - An event (or event record) relates to a specific instance of an event
- class.
- e.g. event: irq_entry, at time X, on CPU Y
- - Source Architecture: Architecture writing the trace.
- - Reader Architecture: Architecture reading the trace.
-
-
-2. High-level representation of a trace
-
-A trace is divided into multiple event streams. Each event stream contains a
-subset of the trace event types.
-
-The final output of the trace, after its generation and optional transport over
-the network, is expected to be either on permanent or temporary storage in a
-virtual file system. Because each event stream is appended to while a trace is
-being recorded, each is associated with a distinct set of files for
-output. Therefore, a stored trace can be represented as a directory
-containing zero, one or more files per stream.
-
-Meta-data description associated with the trace contains information on
-trace event types expressed in the Trace Stream Description Language
-(TSDL). This language describes:
-
-- Trace version.
-- Types available.
-- Per-trace event header description.
-- Per-stream event header description.
-- Per-stream event context description.
-- Per-event
- - Event type to stream mapping.
- - Event type to name mapping.
- - Event type to ID mapping.
- - Event context description.
- - Event fields description.
-
-
-3. Event stream
-
-An event stream can be divided into contiguous event packets of variable
-size. An event packet can contain a certain amount of padding at the
-end. The stream header is repeated at the beginning of each event
-packet. The rationale for the event stream design choices is explained
-in Appendix B. Stream Header Rationale.
-
-The event stream header will therefore be referred to as the "event packet
-header" throughout the rest of this document.
-
-
-4. Types
-
-Types are organized as type classes. Each type class belong to either of two
-kind of types: basic types or compound types.
-
-4.1 Basic types
-
-A basic type is a scalar type, as described in this section. It includes
-integers, GNU/C bitfields, enumerations, and floating point values.
-
-4.1.1 Type inheritance
-
-Type specifications can be inherited to allow deriving types from a
-type class. For example, see the uint32_t named type derived from the "integer"
-type class below ("Integers" section). Types have a precise binary
-representation in the trace. A type class has methods to read and write these
-types, but must be derived into a type to be usable in an event field.
-
-4.1.2 Alignment
-
-We define "byte-packed" types as aligned on the byte size, namely 8-bit.
-We define "bit-packed" types as following on the next bit, as defined by the
-"Integers" section.
-
-Each basic type must specify its alignment, in bits. Examples of
-possible alignments are: bit-packed (align = 1), byte-packed (align =
-8), or word-aligned (e.g. align = 32 or align = 64). The choice depends
-on the architecture preference and compactness vs performance trade-offs
-of the implementation. Architectures providing fast unaligned write
-byte-packed basic types to save space, aligning each type on byte
-boundaries (8-bit). Architectures with slow unaligned writes align types
-on specific alignment values. If no specific alignment is declared for a
-type, it is assumed to be bit-packed for integers with size not multiple
-of 8 bits and for gcc bitfields. All other basic types are byte-packed
-by default. It is however recommended to always specify the alignment
-explicitly. Alignment values must be power of two. Compound types are
-aligned as specified in their individual specification.
-
-The base offset used for field alignment is the start of the packet
-containing the field. For instance, a field aligned on 32-bit needs to
-be at an offset multiple of 32-bit from the start of the packet that
-contains it.
-
-TSDL meta-data attribute representation of a specific alignment:
-
- align = value; /* value in bits */
-
-4.1.3 Byte order
-
-By default, byte order of a basic type is the byte order described in
-the trace description. It can be overridden by specifying a
-"byte_order" attribute for a basic type. Typical use-case is to specify
-the network byte order (big endian: "be") to save data captured from the
-network into the trace without conversion.
-
-TSDL meta-data representation:
-
- byte_order = native OR network OR be OR le; /* network and be are aliases */
-
-The "native" keyword selects the byte order described in the trace
-description. The "network" byte order is an alias for big endian.
-
-Even though the trace description section is not per se a type, for sake
-of clarity, it should be noted that "native" and "network" byte orders
-are only allowed within type declaration. The byte_order specified in
-the trace description section only accepts "be" or "le" values.
-
-4.1.4 Size
-
-Type size, in bits, for integers and floats is that returned by "sizeof()" in C
-multiplied by CHAR_BIT.
-We require the size of "char" and "unsigned char" types (CHAR_BIT) to be fixed
-to 8 bits for cross-endianness compatibility.
-
-TSDL meta-data representation:
-
- size = value; (value is in bits)
-
-4.1.5 Integers
-
-Signed integers are represented in two-complement. Integer alignment,
-size, signedness and byte ordering are defined in the TSDL meta-data.
-Integers aligned on byte size (8-bit) and with length multiple of byte
-size (8-bit) correspond to the C99 standard integers. In addition,
-integers with alignment and/or size that are _not_ a multiple of the
-byte size are permitted; these correspond to the C99 standard bitfields,
-with the added specification that the CTF integer bitfields have a fixed
-binary representation. Integer size needs to be a positive integer.
-Integers of size 0 are forbidden. A MIT-licensed reference
-implementation of the CTF portable bitfields is available at:
-
- http://git.efficios.com/?p=babeltrace.git;a=blob;f=include/babeltrace/bitfield.h
-
-Binary representation of integers:
-
-- On little and big endian:
- - Within a byte, high bits correspond to an integer high bits, and low bits
- correspond to low bits.
-- On little endian:
- - Integer across multiple bytes are placed from the less significant to the
- most significant.
- - Consecutive integers are placed from lower bits to higher bits (even within
- a byte).
-- On big endian:
- - Integer across multiple bytes are placed from the most significant to the
- less significant.
- - Consecutive integers are placed from higher bits to lower bits (even within
- a byte).
-
-This binary representation is derived from the bitfield implementation in GCC
-for little and big endian. However, contrary to what GCC does, integers can
-cross units boundaries (no padding is required). Padding can be explicitly
-added (see 4.1.6 GNU/C bitfields) to follow the GCC layout if needed.
-
-TSDL meta-data representation:
-
- integer {
- signed = true OR false; /* default false */
- byte_order = native OR network OR be OR le; /* default native */
- size = value; /* value in bits, no default */
- align = value; /* value in bits */
- /* based used for pretty-printing output, default: decimal. */
- base = decimal OR dec OR d OR i OR u OR 10 OR hexadecimal OR hex OR x OR X OR p OR 16
- OR octal OR oct OR o OR 8 OR binary OR b OR 2;
- /* character encoding, default: none */
- encoding = none or UTF8 or ASCII;
- }
-
-Example of type inheritance (creation of a uint32_t named type):
-
-typealias integer {
- size = 32;
- signed = false;
- align = 32;
-} := uint32_t;
-
-Definition of a named 5-bit signed bitfield:
-
-typealias integer {
- size = 5;
- signed = true;
- align = 1;
-} := int5_t;
-
-The character encoding field can be used to specify that the integer
-must be printed as a text character when read. e.g.:
-
-typealias integer {
- size = 8;
- align = 8;
- signed = false;
- encoding = UTF8;
-} := utf_char;
-
-
-4.1.6 GNU/C bitfields
-
-The GNU/C bitfields follow closely the integer representation, with a
-particularity on alignment: if a bitfield cannot fit in the current unit, the
-unit is padded and the bitfield starts at the following unit. The unit size is
-defined by the size of the type "unit_type".
-
-TSDL meta-data representation:
-
- unit_type name:size;
-
-As an example, the following structure declared in C compiled by GCC:
-
-struct example {
- short a:12;
- short b:5;
-};
-
-The example structure is aligned on the largest element (short). The second
-bitfield would be aligned on the next unit boundary, because it would not fit in
-the current unit.
-
-4.1.7 Floating point
-
-The floating point values byte ordering is defined in the TSDL meta-data.
-
-Floating point values follow the IEEE 754-2008 standard interchange formats.
-Description of the floating point values include the exponent and mantissa size
-in bits. Some requirements are imposed on the floating point values:
-
-- FLT_RADIX must be 2.
-- mant_dig is the number of digits represented in the mantissa. It is specified
- by the ISO C99 standard, section 5.2.4, as FLT_MANT_DIG, DBL_MANT_DIG and
- LDBL_MANT_DIG as defined by <float.h>.
-- exp_dig is the number of digits represented in the exponent. Given that
- mant_dig is one bit more than its actual size in bits (leading 1 is not
- needed) and also given that the sign bit always takes one bit, exp_dig can be
- specified as:
-
- - sizeof(float) * CHAR_BIT - FLT_MANT_DIG
- - sizeof(double) * CHAR_BIT - DBL_MANT_DIG
- - sizeof(long double) * CHAR_BIT - LDBL_MANT_DIG
-
-TSDL meta-data representation:
-
-floating_point {
- exp_dig = value;
- mant_dig = value;
- byte_order = native OR network OR be OR le;
- align = value;
-}
-
-Example of type inheritance:
-
-typealias floating_point {
- exp_dig = 8; /* sizeof(float) * CHAR_BIT - FLT_MANT_DIG */
- mant_dig = 24; /* FLT_MANT_DIG */
- byte_order = native;
- align = 32;
-} := float;
-
-TODO: define NaN, +inf, -inf behavior.
-
-Bit-packed, byte-packed or larger alignments can be used for floating
-point values, similarly to integers.
-
-4.1.8 Enumerations
-
-Enumerations are a mapping between an integer type and a table of strings. The
-numerical representation of the enumeration follows the integer type specified
-by the meta-data. The enumeration mapping table is detailed in the enumeration
-description within the meta-data. The mapping table maps inclusive value
-ranges (or single values) to strings. Instead of being limited to simple
-"value -> string" mappings, these enumerations map
-"[ start_value ... end_value ] -> string", which map inclusive ranges of
-values to strings. An enumeration from the C language can be represented in
-this format by having the same start_value and end_value for each
-mapping, which is in fact a range of size 1. This single-value range is
-supported without repeating the start and end values with the value =
-string declaration. Enumerations need to contain at least one entry.
-
-enum name : integer_type {
- somestring = start_value1 ... end_value1,
- "other string" = start_value2 ... end_value2,
- yet_another_string, /* will be assigned to end_value2 + 1 */
- "some other string" = value,
- ...
-};
-
-If the values are omitted, the enumeration starts at 0 and increment of 1 for
-each entry. An entry with omitted value that follows a range entry takes
-as value the end_value of the previous range + 1:
-
-enum name : unsigned int {
- ZERO,
- ONE,
- TWO,
- TEN = 10,
- ELEVEN,
-};
-
-Overlapping ranges within a single enumeration are implementation defined.
-
-A nameless enumeration can be declared as a field type or as part of a typedef:
-
-enum : integer_type {
- ...
-}
-
-Enumerations omitting the container type ": integer_type" use the "int"
-type (for compatibility with C99). The "int" type must be previously
-declared. E.g.:
-
-typealias integer { size = 32; align = 32; signed = true; } := int;
-
-enum {
- ...
-}
-
-
-4.2 Compound types
-
-Compound are aggregation of type declarations. Compound types include
-structures, variant, arrays, sequences, and strings.
-
-4.2.1 Structures
-
-Structures are aligned on the largest alignment required by basic types
-contained within the structure. (This follows the ISO/C standard for structures)
-
-TSDL meta-data representation of a named structure:
-
-struct name {
- field_type field_name;
- field_type field_name;
- ...
-};
-
-Example:
-
-struct example {
- integer { /* Nameless type */
- size = 16;
- signed = true;
- align = 16;
- } first_field_name;
- uint64_t second_field_name; /* Named type declared in the meta-data */
-};
-
-The fields are placed in a sequence next to each other. They each
-possess a field name, which is a unique identifier within the structure.
-The identifier is not allowed to use any reserved keyword
-(see Section C.1.2). Replacing reserved keywords with
-underscore-prefixed field names is recommended. Fields starting with an
-underscore should have their leading underscore removed by the CTF trace
-readers.
-
-A nameless structure can be declared as a field type or as part of a typedef:
-
-struct {
- ...
-}
-
-Alignment for a structure compound type can be forced to a minimum value
-by adding an "align" specifier after the declaration of a structure
-body. This attribute is read as: align(value). The value is specified in
-bits. The structure will be aligned on the maximum value between this
-attribute and the alignment required by the basic types contained within
-the structure. e.g.
-
-struct {
- ...
-} align(32)
-
-4.2.2 Variants (Discriminated/Tagged Unions)
-
-A CTF variant is a selection between different types. A CTF variant must
-always be defined within the scope of a structure or within fields
-contained within a structure (defined recursively). A "tag" enumeration
-field must appear in either the same static scope, prior to the variant
-field (in field declaration order), in an upper static scope, or in an
-upper dynamic scope (see Section 7.3.2). The type selection is indicated
-by the mapping from the enumeration value to the string used as variant
-type selector. The field to use as tag is specified by the "tag_field",
-specified between "< >" after the "variant" keyword for unnamed
-variants, and after "variant name" for named variants. It is not
-required that each enumeration mapping appears as variant type tag
-field. It is also not required that each variant type tag appears as
-enumeration mapping. However, it is required that any enumeration
-mapping encountered within a stream has a matching variant type tag
-field.
-
-The alignment of the variant is the alignment of the type as selected by
-the tag value for the specific instance of the variant. The size of the
-variant is the size as selected by the tag value for the specific
-instance of the variant.
-
-The alignment of the type containing the variant is independent of the
-variant alignment. For instance, if a structure contains two fields, a
-32-bit integer, aligned on 32 bits, and a variant, which contains two
-choices: either a 32-bit field, aligned on 32 bits, or a 64-bit field,
-aligned on 64 bits, the alignment of the outmost structure will be
-32-bit (the alignment of its largest field, disregarding the alignment
-of the variant). The alignment of the variant will depend on the
-selector: if the variant's 32-bit field is selected, its alignment will
-be 32-bit, or 64-bit otherwise. It is important to note that variants
-are specifically tailored for compactness in a stream. Therefore, the
-relative offsets of compound type fields can vary depending on
-the offset at which the compound type starts if it contains a variant
-that itself contains a type with alignment larger than the largest field
-contained within the compound type. This is caused by the fact that the
-compound type may contain the enumeration that select the variant's
-choice, and therefore the alignment to be applied to the compound type
-cannot be determined before encountering the enumeration.
-
-Each variant type selector possess a field name, which is a unique
-identifier within the variant. The identifier is not allowed to use any
-reserved keyword (see Section C.1.2). Replacing reserved keywords with
-underscore-prefixed field names is recommended. Fields starting with an
-underscore should have their leading underscore removed by the CTF trace
-readers.
-
-
-A named variant declaration followed by its definition within a structure
-declaration:
-
-variant name {
- field_type sel1;
- field_type sel2;
- field_type sel3;
- ...
-};
-
-struct {
- enum : integer_type { sel1, sel2, sel3, ... } tag_field;
- ...
- variant name <tag_field> v;
-}
-
-An unnamed variant definition within a structure is expressed by the following
-TSDL meta-data:
-
-struct {
- enum : integer_type { sel1, sel2, sel3, ... } tag_field;
- ...
- variant <tag_field> {
- field_type sel1;
- field_type sel2;
- field_type sel3;
- ...
- } v;
-}
-
-Example of a named variant within a sequence that refers to a single tag field:
-
-variant example {
- uint32_t a;
- uint64_t b;
- short c;
-};
-
-struct {
- enum : uint2_t { a, b, c } choice;
- unsigned int seqlen;
- variant example <choice> v[seqlen];
-}
-
-Example of an unnamed variant:
-
-struct {
- enum : uint2_t { a, b, c, d } choice;
- /* Unrelated fields can be added between the variant and its tag */
- int32_t somevalue;
- variant <choice> {
- uint32_t a;
- uint64_t b;
- short c;
- struct {
- unsigned int field1;
- uint64_t field2;
- } d;
- } s;
-}
-
-Example of an unnamed variant within an array:
-
-struct {
- enum : uint2_t { a, b, c } choice;
- variant <choice> {
- uint32_t a;
- uint64_t b;
- short c;
- } v[10];
-}
-
-Example of a variant type definition within a structure, where the defined type
-is then declared within an array of structures. This variant refers to a tag
-located in an upper static scope. This example clearly shows that a variant
-type definition referring to the tag "x" uses the closest preceding field from
-the static scope of the type definition.
-
-struct {
- enum : uint2_t { a, b, c, d } x;
-
- typedef variant <x> { /*
- * "x" refers to the preceding "x" enumeration in the
- * static scope of the type definition.
- */
- uint32_t a;
- uint64_t b;
- short c;
- } example_variant;
-
- struct {
- enum : int { x, y, z } x; /* This enumeration is not used by "v". */
- example_variant v; /*
- * "v" uses the "enum : uint2_t { a, b, c, d }"
- * tag.
- */
- } a[10];
-}
-
-4.2.3 Arrays
-
-Arrays are fixed-length. Their length is declared in the type
-declaration within the meta-data. They contain an array of "inner type"
-elements, which can refer to any type not containing the type of the
-array being declared (no circular dependency). The length is the number
-of elements in an array.
-
-TSDL meta-data representation of a named array:
-
-typedef elem_type name[length];
-
-A nameless array can be declared as a field type within a structure, e.g.:
-
- uint8_t field_name[10];
-
-Arrays are always aligned on their element alignment requirement.
-
-4.2.4 Sequences
-
-Sequences are dynamically-sized arrays. They refer to a "length"
-unsigned integer field, which must appear in either the same static scope,
-prior to the sequence field (in field declaration order), in an upper
-static scope, or in an upper dynamic scope (see Section 7.3.2). This
-length field represents the number of elements in the sequence. The
-sequence per se is an array of "inner type" elements.
-
-TSDL meta-data representation for a sequence type definition:
-
-struct {
- unsigned int length_field;
- typedef elem_type typename[length_field];
- typename seq_field_name;
-}
-
-A sequence can also be declared as a field type, e.g.:
-
-struct {
- unsigned int length_field;
- long seq_field_name[length_field];
-}
-
-Multiple sequences can refer to the same length field, and these length
-fields can be in a different upper dynamic scope:
-
-e.g., assuming the stream.event.header defines:
-
-stream {
- ...
- id = 1;
- event.header := struct {
- uint16_t seq_len;
- };
-};
-
-event {
- ...
- stream_id = 1;
- fields := struct {
- long seq_a[stream.event.header.seq_len];
- char seq_b[stream.event.header.seq_len];
- };
-};
-
-The sequence elements follow the "array" specifications.
-
-4.2.5 Strings
-
-Strings are an array of bytes of variable size and are terminated by a '\0'
-"NULL" character. Their encoding is described in the TSDL meta-data. In
-absence of encoding attribute information, the default encoding is
-UTF-8.
-
-TSDL meta-data representation of a named string type:
-
-typealias string {
- encoding = UTF8 OR ASCII;
-} := name;
-
-A nameless string type can be declared as a field type:
-
-string field_name; /* Use default UTF8 encoding */
-
-Strings are always aligned on byte size.
-
-5. Event Packet Header
-
-The event packet header consists of two parts: the "event packet header"
-is the same for all streams of a trace. The second part, the "event
-packet context", is described on a per-stream basis. Both are described
-in the TSDL meta-data.
-
-Event packet header (all fields are optional, specified by TSDL meta-data):
-
-- Magic number (CTF magic number: 0xC1FC1FC1) specifies that this is a
- CTF packet. This magic number is optional, but when present, it should
- come at the very beginning of the packet.
-- Trace UUID, used to ensure the event packet match the meta-data used.
- (note: we cannot use a meta-data checksum in every cases instead of a
- UUID because meta-data can be appended to while tracing is active)
- This field is optional.
-- Stream ID, used as reference to stream description in meta-data.
- This field is optional if there is only one stream description in the
- meta-data, but becomes required if there are more than one stream in
- the TSDL meta-data description.
-
-Event packet context (all fields are optional, specified by TSDL meta-data):
-
-- Event packet content size (in bits).
-- Event packet size (in bits, includes padding).
-- Event packet content checksum. Checksum excludes the event packet
- header.
-- Per-stream event packet sequence count (to deal with UDP packet loss). The
- number of significant sequence counter bits should also be present, so
- wrap-arounds are dealt with correctly.
-- Time-stamp at the beginning and time-stamp at the end of the event packet.
- Both timestamps are written in the packet header, but sampled respectively
- while (or before) writing the first event and while (or after) writing the
- last event in the packet. The inclusive range between these timestamps should
- include all event timestamps assigned to events contained within the packet.
- The timestamp at the beginning of an event packet is guaranteed to be
- below or equal the timestamp at the end of that event packet.
- The timestamp at the end of an event packet is guaranteed to be below
- or equal the timestamps at the end of any following packet within the
- same stream. See Section 8. Clocks for more detail.
-- Events discarded count
- - Snapshot of a per-stream free-running counter, counting the number of
- events discarded that were supposed to be written in the stream after
- the last event in the event packet.
- * Note: producer-consumer buffer full condition can fill the current
- event packet with padding so we know exactly where events have been
- discarded. However, if the buffer full condition chooses not
- to fill the current event packet with padding, all we know
- about the timestamp range in which the events have been
- discarded is that it is somewhere between the beginning and
- the end of the packet.
-- Lossless compression scheme used for the event packet content. Applied
- directly to raw data. New types of compression can be added in following
- versions of the format.
- 0: no compression scheme
- 1: bzip2
- 2: gzip
- 3: xz
-- Cypher used for the event packet content. Applied after compression.
- 0: no encryption
- 1: AES
-- Checksum scheme used for the event packet content. Applied after encryption.
- 0: no checksum
- 1: md5
- 2: sha1
- 3: crc32
-
-5.1 Event Packet Header Description
-
-The event packet header layout is indicated by the trace packet.header
-field. Here is a recommended structure type for the packet header with
-the fields typically expected (although these fields are each optional):
-
-struct event_packet_header {
- uint32_t magic;
- uint8_t uuid[16];
- uint32_t stream_id;
-};
-
-trace {
- ...
- packet.header := struct event_packet_header;
-};
-
-If the magic number is not present, tools such as "file" will have no
-mean to discover the file type.
-
-If the uuid is not present, no validation that the meta-data actually
-corresponds to the stream is performed.
-
-If the stream_id packet header field is missing, the trace can only
-contain a single stream. Its "id" field can be left out, and its events
-don't need to declare a "stream_id" field.
-
-
-5.2 Event Packet Context Description
-
-Event packet context example. These are declared within the stream declaration
-in the meta-data. All these fields are optional. If the packet size field is
-missing, the whole stream only contains a single packet. If the content
-size field is missing, the packet is filled (no padding). The content
-and packet sizes include all headers.
-
-An example event packet context type:
-
-struct event_packet_context {
- uint64_t timestamp_begin;
- uint64_t timestamp_end;
- uint32_t checksum;
- uint32_t stream_packet_count;
- uint32_t events_discarded;
- uint32_t cpu_id;
- uint64_t/uint32_t/uint16_t content_size;
- uint64_t/uint32_t/uint16_t packet_size;
- uint8_t compression_scheme;
- uint8_t encryption_scheme;
- uint8_t checksum_scheme;
-};
-
-
-6. Event Structure
-
-The overall structure of an event is:
-
-1 - Event Header (as specified by the stream meta-data)
- 2 - Stream Event Context (as specified by the stream meta-data)
- 3 - Event Context (as specified by the event meta-data)
- 4 - Event Payload (as specified by the event meta-data)
-
-This structure defines an implicit dynamic scoping, where variants
-located in inner structures (those with a higher number in the listing
-above) can refer to the fields of outer structures (with lower number in
-the listing above). See Section 7.3 TSDL Scopes for more detail.
-
-The total length of an event is defined as the difference between the
-end of its Event Payload and the end of the previous event's Event
-Payload. Therefore, it includes the event header alignment padding, and
-all its fields and their respective alignment padding. Events of length
-0 are forbidden.
-
-6.1 Event Header
-
-Event headers can be described within the meta-data. We hereby propose, as an
-example, two types of events headers. Type 1 accommodates streams with less than
-31 event IDs. Type 2 accommodates streams with 31 or more event IDs.
-
-One major factor can vary between streams: the number of event IDs assigned to
-a stream. Luckily, this information tends to stay relatively constant (modulo
-event registration while trace is being recorded), so we can specify different
-representations for streams containing few event IDs and streams containing
-many event IDs, so we end up representing the event ID and time-stamp as
-densely as possible in each case.
-
-The header is extended in the rare occasions where the information cannot be
-represented in the ranges available in the standard event header. They are also
-used in the rare occasions where the data required for a field could not be
-collected: the flag corresponding to the missing field within the missing_fields
-array is then set to 1.
-
-Types uintX_t represent an X-bit unsigned integer, as declared with
-either:
-
- typealias integer { size = X; align = X; signed = false; } := uintX_t;
-
- or
-
- typealias integer { size = X; align = 1; signed = false; } := uintX_t;
-
-For more information about timestamp fields, see Section 8. Clocks.
-
-6.1.1 Type 1 - Few event IDs
-
- - Aligned on 32-bit (or 8-bit if byte-packed, depending on the architecture
- preference).
- - Native architecture byte ordering.
- - For "compact" selection
- - Fixed size: 32 bits.
- - For "extended" selection
- - Size depends on the architecture and variant alignment.
-
-struct event_header_1 {
- /*
- * id: range: 0 - 30.
- * id 31 is reserved to indicate an extended header.
- */
- enum : uint5_t { compact = 0 ... 30, extended = 31 } id;
- variant <id> {
- struct {
- uint27_t timestamp;
- } compact;
- struct {
- uint32_t id; /* 32-bit event IDs */
- uint64_t timestamp; /* 64-bit timestamps */
- } extended;
- } v;
-} align(32); /* or align(8) */
-
-
-6.1.2 Type 2 - Many event IDs
-
- - Aligned on 16-bit (or 8-bit if byte-packed, depending on the architecture
- preference).
- - Native architecture byte ordering.
- - For "compact" selection
- - Size depends on the architecture and variant alignment.
- - For "extended" selection
- - Size depends on the architecture and variant alignment.
-
-struct event_header_2 {
- /*
- * id: range: 0 - 65534.
- * id 65535 is reserved to indicate an extended header.
- */
- enum : uint16_t { compact = 0 ... 65534, extended = 65535 } id;
- variant <id> {
- struct {
- uint32_t timestamp;
- } compact;
- struct {
- uint32_t id; /* 32-bit event IDs */
- uint64_t timestamp; /* 64-bit timestamps */
- } extended;
- } v;
-} align(16); /* or align(8) */
-
-
-6.2 Stream Event Context and Event Context
-
-The event context contains information relative to the current event.
-The choice and meaning of this information is specified by the TSDL
-stream and event meta-data descriptions. The stream context is applied
-to all events within the stream. The stream context structure follows
-the event header. The event context is applied to specific events. Its
-structure follows the stream context structure.
-
-An example of stream-level event context is to save the event payload size with
-each event, or to save the current PID with each event. These are declared
-within the stream declaration within the meta-data:
-
- stream {
- ...
- event.context := struct {
- uint pid;
- uint16_t payload_size;
- };
- };
-
-An example of event-specific event context is to declare a bitmap of missing
-fields, only appended after the stream event context if the extended event
-header is selected. NR_FIELDS is the number of fields within the event (a
-numeric value).
-
- event {
- context = struct {
- variant <id> {
- struct { } compact;
- struct {
- uint1_t missing_fields[NR_FIELDS]; /* missing event fields bitmap */
- } extended;
- } v;
- };
- ...
- }
-
-6.3 Event Payload
-
-An event payload contains fields specific to a given event type. The fields
-belonging to an event type are described in the event-specific meta-data
-within a structure type.
-
-6.3.1 Padding
-
-No padding at the end of the event payload. This differs from the ISO/C standard
-for structures, but follows the CTF standard for structures. In a trace, even
-though it makes sense to align the beginning of a structure, it really makes no
-sense to add padding at the end of the structure, because structures are usually
-not followed by a structure of the same type.
-
-This trick can be done by adding a zero-length "end" field at the end of the C
-structures, and by using the offset of this field rather than using sizeof()
-when calculating the size of a structure (see Appendix "A. Helper macros").
-
-6.3.2 Alignment
-
-The event payload is aligned on the largest alignment required by types
-contained within the payload. (This follows the ISO/C standard for structures)
-
-
-7. Trace Stream Description Language (TSDL)
-
-The Trace Stream Description Language (TSDL) allows expression of the
-binary trace streams layout in a C99-like Domain Specific Language
-(DSL).
-
-
-7.1 Meta-data
-
-The trace stream layout description is located in the trace meta-data.
-The meta-data is itself located in a stream identified by its name:
-"metadata".
-
-The meta-data description can be expressed in two different formats:
-text-only and packet-based. The text-only description facilitates
-generation of meta-data and provides a convenient way to enter the
-meta-data information by hand. The packet-based meta-data provides the
-CTF stream packet facilities (checksumming, compression, encryption,
-network-readiness) for meta-data stream generated and transported by a
-tracer.
-
-The text-only meta-data file is a plain-text TSDL description. This file
-must begin with the following characters to identify the file as a CTF
-TSDL text-based metadata file (without the double-quotes) :
-
-"/* CTF"
-
-It must be followed by a space, and the version of the specification
-followed by the CTF trace, e.g.:
-
-" 1.8"
-
-These characters allow automated discovery of file type and CTF
-specification version. They are interpreted as a the beginning of a
-comment by the TSDL metadata parser. The comment can be continued to
-contain extra commented characters before it is closed.
-
-The packet-based meta-data is made of "meta-data packets", which each
-start with a meta-data packet header. The packet-based meta-data
-description is detected by reading the magic number "0x75D11D57" at the
-beginning of the file. This magic number is also used to detect the
-endianness of the architecture by trying to read the CTF magic number
-and its counterpart in reversed endianness. The events within the
-meta-data stream have no event header nor event context. Each event only
-contains a special "sequence" payload, which is a sequence of bits which
-length is implicitly calculated by using the
-"trace.packet.header.content_size" field, minus the packet header size.
-The formatting of this sequence of bits is a plain-text representation
-of the TSDL description. Each meta-data packet start with a special
-packet header, specific to the meta-data stream, which contains,
-exactly:
-
-struct metadata_packet_header {
- uint32_t magic; /* 0x75D11D57 */
- uint8_t uuid[16]; /* Unique Universal Identifier */
- uint32_t checksum; /* 0 if unused */
- uint32_t content_size; /* in bits */
- uint32_t packet_size; /* in bits */
- uint8_t compression_scheme; /* 0 if unused */
- uint8_t encryption_scheme; /* 0 if unused */
- uint8_t checksum_scheme; /* 0 if unused */
- uint8_t major; /* CTF spec version major number */
- uint8_t minor; /* CTF spec version minor number */
-};
-
-The packet-based meta-data can be converted to a text-only meta-data by
-concatenating all the strings it contains.
-
-In the textual representation of the meta-data, the text contained
-within "/*" and "*/", as well as within "//" and end of line, are
-treated as comments. Boolean values can be represented as true, TRUE,
-or 1 for true, and false, FALSE, or 0 for false. Within the string-based
-meta-data description, the trace UUID is represented as a string of
-hexadecimal digits and dashes "-". In the event packet header, the trace
-UUID is represented as an array of bytes.
-
-
-7.2 Declaration vs Definition
-
-A declaration associates a layout to a type, without specifying where
-this type is located in the event structure hierarchy (see Section 6).
-This therefore includes typedef, typealias, as well as all type
-specifiers. In certain circumstances (typedef, structure field and
-variant field), a declaration is followed by a declarator, which specify
-the newly defined type name (for typedef), or the field name (for
-declarations located within structure and variants). Array and sequence,
-declared with square brackets ("[" "]"), are part of the declarator,
-similarly to C99. The enumeration base type is specified by
-": enum_base", which is part of the type specifier. The variant tag
-name, specified between "<" ">", is also part of the type specifier.
-
-A definition associates a type to a location in the event structure
-hierarchy (see Section 6). This association is denoted by ":=", as shown
-in Section 7.3.
-
-
-7.3 TSDL Scopes
-
-TSDL uses three different types of scoping: a lexical scope is used for
-declarations and type definitions, and static and dynamic scopes are
-used for variants references to tag fields (with relative and absolute
-path lookups) and for sequence references to length fields.
-
-7.3.1 Lexical Scope
-
-Each of "trace", "env", "stream", "event", "struct" and "variant" have
-their own nestable declaration scope, within which types can be declared
-using "typedef" and "typealias". A root declaration scope also contains
-all declarations located outside of any of the aforementioned
-declarations. An inner declaration scope can refer to type declared
-within its container lexical scope prior to the inner declaration scope.
-Redefinition of a typedef or typealias is not valid, although hiding an
-upper scope typedef or typealias is allowed within a sub-scope.
-
-7.3.2 Static and Dynamic Scopes
-
-A local static scope consists in the scope generated by the declaration
-of fields within a compound type. A static scope is a local static scope
-augmented with the nested sub-static-scopes it contains.
-
-A dynamic scope consists in the static scope augmented with the
-implicit event structure definition hierarchy presented at Section 6.
-
-Multiple declarations of the same field name within a local static scope
-is not valid. It is however valid to re-use the same field name in
-different local scopes.
-
-Nested static and dynamic scopes form lookup paths. These are used for
-variant tag and sequence length references. They are used at the variant
-and sequence definition site to look up the location of the tag field
-associated with a variant, and to lookup up the location of the length
-field associated with a sequence.
-
-Variants and sequences can refer to a tag field either using a relative
-path or an absolute path. The relative path is relative to the scope in
-which the variant or sequence performing the lookup is located.
-Relative paths are only allowed to lookup within the same static scope,
-which includes its nested static scopes. Lookups targeting parent static
-scopes need to be performed with an absolute path.
-
-Absolute path lookups use the full path including the dynamic scope
-followed by a "." and then the static scope. Therefore, variants (or
-sequences) in lower levels in the dynamic scope (e.g. event context) can
-refer to a tag (or length) field located in upper levels (e.g. in the
-event header) by specifying, in this case, the associated tag with
-<stream.event.header.field_name>. This allows, for instance, the event
-context to define a variant referring to the "id" field of the event
-header as selector.
-
-The dynamic scope prefixes are thus:
-
- - Trace Environment: <env. >,
- - Trace Packet Header: <trace.packet.header. >,
- - Stream Packet Context: <stream.packet.context. >,
- - Event Header: <stream.event.header. >,
- - Stream Event Context: <stream.event.context. >,
- - Event Context: <event.context. >,
- - Event Payload: <event.fields. >.
-
-
-The target dynamic scope must be specified explicitly when referring to
-a field outside of the static scope (absolute scope reference). No
-conflict can occur between relative and dynamic paths, because the
-keywords "trace", "stream", and "event" are reserved, and thus
-not permitted as field names. It is recommended that field names
-clashing with CTF and C99 reserved keywords use an underscore prefix to
-eliminate the risk of generating a description containing an invalid
-field name. Consequently, fields starting with an underscore should have
-their leading underscore removed by the CTF trace readers.
-
-
-The information available in the dynamic scopes can be thought of as the
-current tracing context. At trace production, information about the
-current context is saved into the specified scope field levels. At trace
-consumption, for each event, the current trace context is therefore
-readable by accessing the upper dynamic scopes.
-
-
-7.4 TSDL Examples
-
-The grammar representing the TSDL meta-data is presented in Appendix C.
-TSDL Grammar. This section presents a rather lighter reading that
-consists in examples of TSDL meta-data, with template values.
-
-The stream "id" can be left out if there is only one stream in the
-trace. The event "id" field can be left out if there is only one event
-in a stream.
-
-trace {
- major = value; /* CTF spec version major number */
- minor = value; /* CTF spec version minor number */
- uuid = "aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa"; /* Trace UUID */
- byte_order = be OR le; /* Endianness (required) */
- packet.header := struct {
- uint32_t magic;
- uint8_t uuid[16];
- uint32_t stream_id;
- };
-};
-
-/*
- * The "env" (environment) scope contains assignment expressions. The
- * field names and content are implementation-defined.
- */
-env {
- pid = value; /* example */
- proc_name = "name"; /* example */
- ...
-};
-
-stream {
- id = stream_id;
- /* Type 1 - Few event IDs; Type 2 - Many event IDs. See section 6.1. */
- event.header := event_header_1 OR event_header_2;
- event.context := struct {
- ...
- };
- packet.context := struct {
- ...
- };
-};
-
-event {
- name = "event_name";
- id = value; /* Numeric identifier within the stream */
- stream_id = stream_id;
- loglevel = value;
- model.emf.uri = "string";
- context := struct {
- ...
- };
- fields := struct {
- ...
- };
-};
-
-callsite {
- name = "event_name";
- func = "func_name";
- file = "myfile.c";
- line = 39;
- ip = 0x40096c;
-};
-
-/* More detail on types in section 4. Types */
-
-/*
- * Named types:
- *
- * Type declarations behave similarly to the C standard.
- */
-
-typedef aliased_type_specifiers new_type_declarators;
-
-/* e.g.: typedef struct example new_type_name[10]; */
-
-/*
- * typealias
- *
- * The "typealias" declaration can be used to give a name (including
- * pointer declarator specifier) to a type. It should also be used to
- * map basic C types (float, int, unsigned long, ...) to a CTF type.
- * Typealias is a superset of "typedef": it also allows assignment of a
- * simple variable identifier to a type.
- */
-
-typealias type_class {
- ...
-} := type_specifiers type_declarator;
-
-/*
- * e.g.:
- * typealias integer {
- * size = 32;
- * align = 32;
- * signed = false;
- * } := struct page *;
- *
- * typealias integer {
- * size = 32;
- * align = 32;
- * signed = true;
- * } := int;
- */
-
-struct name {
- ...
-};
-
-variant name {
- ...
-};
-
-enum name : integer_type {
- ...
-};
-
-
-/*
- * Unnamed types, contained within compound type fields, typedef or typealias.
- */
-
-struct {
- ...
-}
-
-struct {
- ...
-} align(value)
-
-variant {
- ...
-}
-
-enum : integer_type {
- ...
-}
-
-typedef type new_type[length];
-
-struct {
- type field_name[length];
-}
-
-typedef type new_type[length_type];
-
-struct {
- type field_name[length_type];
-}
-
-integer {
- ...
-}
-
-floating_point {
- ...
-}
-
-struct {
- integer_type field_name:size; /* GNU/C bitfield */
-}
-
-struct {
- string field_name;
-}
-
-
-8. Clocks
-
-Clock metadata allows to describe the clock topology of the system, as
-well as to detail each clock parameter. In absence of clock description,
-it is assumed that all fields named "timestamp" use the same clock
-source, which increments once per nanosecond.
-
-Describing a clock and how it is used by streams is threefold: first,
-the clock and clock topology should be described in a "clock"
-description block, e.g.:
-
-clock {
- name = cycle_counter_sync;
- uuid = "62189bee-96dc-11e0-91a8-cfa3d89f3923";
- description = "Cycle counter synchronized across CPUs";
- freq = 1000000000; /* frequency, in Hz */
- /* precision in seconds is: 1000 * (1/freq) */
- precision = 1000;
- /*
- * clock value offset from Epoch is:
- * offset_s + (offset * (1/freq))
- */
- offset_s = 1326476837;
- offset = 897235420;
- absolute = FALSE;
-};
-
-The mandatory "name" field specifies the name of the clock identifier,
-which can later be used as a reference. The optional field "uuid" is the
-unique identifier of the clock. It can be used to correlate different
-traces that use the same clock. An optional textual description string
-can be added with the "description" field. The "freq" field is the
-initial frequency of the clock, in Hz. If the "freq" field is not
-present, the frequency is assumed to be 1000000000 (providing clock
-increment of 1 ns). The optional "precision" field details the
-uncertainty on the clock measurements, in (1/freq) units. The "offset_s"
-and "offset" fields indicate the offset from POSIX.1 Epoch, 1970-01-01
-00:00:00 +0000 (UTC), to the zero of value of the clock. The "offset_s"
-field is in seconds. The "offset" field is in (1/freq) units. If any of
-the "offset_s" or "offset" field is not present, it is assigned the 0
-value. The field "absolute" is TRUE if the clock is a global reference
-across different clock uuid (e.g. NTP time). Otherwise, "absolute" is
-FALSE, and the clock can be considered as synchronized only with other
-clocks that have the same uuid.
-
-
-Secondly, a reference to this clock should be added within an integer
-type:
-
-typealias integer {
- size = 64; align = 1; signed = false;
- map = clock.cycle_counter_sync.value;
-} := uint64_ccnt_t;
-
-Thirdly, stream declarations can reference the clock they use as a
-time-stamp source:
-
-struct packet_context {
- uint64_ccnt_t ccnt_begin;
- uint64_ccnt_t ccnt_end;
- /* ... */
-};
-
-stream {
- /* ... */
- event.header := struct {
- uint64_ccnt_t timestamp;
- /* ... */
- }
- packet.context := struct packet_context;
-};
-
-For a N-bit integer type referring to a clock, if the integer overflows
-compared to the N low order bits of the clock prior value found in the
-same stream, then it is assumed that one, and only one, overflow
-occurred. It is therefore important that events encoding time on a small
-number of bits happen frequently enough to detect when more than one
-N-bit overflow occurs.
-
-In a packet context, clock field names ending with "_begin" and "_end"
-have a special meaning: this refers to the time-stamps at, respectively,
-the beginning and the end of each packet.
-
-
-A. Helper macros
-
-The two following macros keep track of the size of a GNU/C structure without
-padding at the end by placing HEADER_END as the last field. A one byte end field
-is used for C90 compatibility (C99 flexible arrays could be used here). Note
-that this does not affect the effective structure size, which should always be
-calculated with the header_sizeof() helper.
-
-#define HEADER_END char end_field
-#define header_sizeof(type) offsetof(typeof(type), end_field)
-
-
-B. Stream Header Rationale
-
-An event stream is divided in contiguous event packets of variable size. These
-subdivisions allow the trace analyzer to perform a fast binary search by time
-within the stream (typically requiring to index only the event packet headers)
-without reading the whole stream. These subdivisions have a variable size to
-eliminate the need to transfer the event packet padding when partially filled
-event packets must be sent when streaming a trace for live viewing/analysis.
-An event packet can contain a certain amount of padding at the end. Dividing
-streams into event packets is also useful for network streaming over UDP and
-flight recorder mode tracing (a whole event packet can be swapped out of the
-buffer atomically for reading).
-
-The stream header is repeated at the beginning of each event packet to allow
-flexibility in terms of:
-
- - streaming support,
- - allowing arbitrary buffers to be discarded without making the trace
- unreadable,
- - allow UDP packet loss handling by either dealing with missing event packet
- or asking for re-transmission.
- - transparently support flight recorder mode,
- - transparently support crash dump.
-
-
-C. TSDL Grammar
-
-/*
- * Common Trace Format (CTF) Trace Stream Description Language (TSDL) Grammar.
- *
- * Inspired from the C99 grammar:
- * http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1124.pdf (Annex A)
- * and c++1x grammar (draft)
- * http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3291.pdf (Annex A)
- *
- * Specialized for CTF needs by including only constant and declarations from
- * C99 (excluding function declarations), and by adding support for variants,
- * sequences and CTF-specific specifiers. Enumeration container types
- * semantic is inspired from c++1x enum-base.
- */
-
-1) Lexical grammar
-
-1.1) Lexical elements
-
-token:
- keyword
- identifier
- constant
- string-literal
- punctuator
-
-1.2) Keywords
-
-keyword: is one of
-
-align
-callsite
-const
-char
-clock
-double
-enum
-env
-event
-floating_point
-float
-integer
-int
-long
-short
-signed
-stream
-string
-struct
-trace
-typealias
-typedef
-unsigned
-variant
-void
-_Bool
-_Complex
-_Imaginary
-
-
-1.3) Identifiers
-
-identifier:
- identifier-nondigit
- identifier identifier-nondigit
- identifier digit
-
-identifier-nondigit:
- nondigit
- universal-character-name
- any other implementation-defined characters
-
-nondigit:
- _
- [a-zA-Z] /* regular expression */
-
-digit:
- [0-9] /* regular expression */
-
-1.4) Universal character names
-
-universal-character-name:
- \u hex-quad
- \U hex-quad hex-quad
-
-hex-quad:
- hexadecimal-digit hexadecimal-digit hexadecimal-digit hexadecimal-digit
-
-1.5) Constants
-
-constant:
- integer-constant
- enumeration-constant
- character-constant
-
-integer-constant:
- decimal-constant integer-suffix-opt
- octal-constant integer-suffix-opt
- hexadecimal-constant integer-suffix-opt
-
-decimal-constant:
- nonzero-digit
- decimal-constant digit
-
-octal-constant:
- 0
- octal-constant octal-digit
-
-hexadecimal-constant:
- hexadecimal-prefix hexadecimal-digit
- hexadecimal-constant hexadecimal-digit
-
-hexadecimal-prefix:
- 0x
- 0X
-
-nonzero-digit:
- [1-9]
-
-integer-suffix:
- unsigned-suffix long-suffix-opt
- unsigned-suffix long-long-suffix
- long-suffix unsigned-suffix-opt
- long-long-suffix unsigned-suffix-opt
-
-unsigned-suffix:
- u
- U
-
-long-suffix:
- l
- L
-
-long-long-suffix:
- ll
- LL
-
-enumeration-constant:
- identifier
- string-literal
-
-character-constant:
- ' c-char-sequence '
- L' c-char-sequence '
-
-c-char-sequence:
- c-char
- c-char-sequence c-char
-
-c-char:
- any member of source charset except single-quote ('), backslash
- (\), or new-line character.
- escape-sequence
-
-escape-sequence:
- simple-escape-sequence
- octal-escape-sequence
- hexadecimal-escape-sequence
- universal-character-name
-
-simple-escape-sequence: one of
- \' \" \? \\ \a \b \f \n \r \t \v
-
-octal-escape-sequence:
- \ octal-digit
- \ octal-digit octal-digit
- \ octal-digit octal-digit octal-digit
-
-hexadecimal-escape-sequence:
- \x hexadecimal-digit
- hexadecimal-escape-sequence hexadecimal-digit
-
-1.6) String literals
-
-string-literal:
- " s-char-sequence-opt "
- L" s-char-sequence-opt "
-
-s-char-sequence:
- s-char
- s-char-sequence s-char
-
-s-char:
- any member of source charset except double-quote ("), backslash
- (\), or new-line character.
- escape-sequence
-
-1.7) Punctuators
-
-punctuator: one of
- [ ] ( ) { } . -> * + - < > : ; ... = ,
-
-
-2) Phrase structure grammar
-
-primary-expression:
- identifier
- constant
- string-literal
- ( unary-expression )
-
-postfix-expression:
- primary-expression
- postfix-expression [ unary-expression ]
- postfix-expression . identifier
- postfix-expressoin -> identifier
-
-unary-expression:
- postfix-expression
- unary-operator postfix-expression
-
-unary-operator: one of
- + -
-
-assignment-operator:
- =
-
-type-assignment-operator:
- :=
-
-constant-expression-range:
- unary-expression ... unary-expression
-
-2.2) Declarations:
-
-declaration:
- declaration-specifiers declarator-list-opt ;
- ctf-specifier ;
-
-declaration-specifiers:
- storage-class-specifier declaration-specifiers-opt
- type-specifier declaration-specifiers-opt
- type-qualifier declaration-specifiers-opt
-
-declarator-list:
- declarator
- declarator-list , declarator
-
-abstract-declarator-list:
- abstract-declarator
- abstract-declarator-list , abstract-declarator
-
-storage-class-specifier:
- typedef
-
-type-specifier:
- void
- char
- short
- int
- long
- float
- double
- signed
- unsigned
- _Bool
- _Complex
- _Imaginary
- struct-specifier
- variant-specifier
- enum-specifier
- typedef-name
- ctf-type-specifier
-
-align-attribute:
- align ( unary-expression )
-
-struct-specifier:
- struct identifier-opt { struct-or-variant-declaration-list-opt } align-attribute-opt
- struct identifier align-attribute-opt
-
-struct-or-variant-declaration-list:
- struct-or-variant-declaration
- struct-or-variant-declaration-list struct-or-variant-declaration
-
-struct-or-variant-declaration:
- specifier-qualifier-list struct-or-variant-declarator-list ;
- declaration-specifiers-opt storage-class-specifier declaration-specifiers-opt declarator-list ;
- typealias declaration-specifiers abstract-declarator-list type-assignment-operator declaration-specifiers abstract-declarator-list ;
- typealias declaration-specifiers abstract-declarator-list type-assignment-operator declarator-list ;
-
-specifier-qualifier-list:
- type-specifier specifier-qualifier-list-opt
- type-qualifier specifier-qualifier-list-opt
-
-struct-or-variant-declarator-list:
- struct-or-variant-declarator
- struct-or-variant-declarator-list , struct-or-variant-declarator
-
-struct-or-variant-declarator:
- declarator
- declarator-opt : unary-expression
-
-variant-specifier:
- variant identifier-opt variant-tag-opt { struct-or-variant-declaration-list }
- variant identifier variant-tag
-
-variant-tag:
- < unary-expression >
-
-enum-specifier:
- enum identifier-opt { enumerator-list }
- enum identifier-opt { enumerator-list , }
- enum identifier
- enum identifier-opt : declaration-specifiers { enumerator-list }
- enum identifier-opt : declaration-specifiers { enumerator-list , }
-
-enumerator-list:
- enumerator
- enumerator-list , enumerator
-
-enumerator:
- enumeration-constant
- enumeration-constant assignment-operator unary-expression
- enumeration-constant assignment-operator constant-expression-range
-
-type-qualifier:
- const
-
-declarator:
- pointer-opt direct-declarator
-
-direct-declarator:
- identifier
- ( declarator )
- direct-declarator [ unary-expression ]
-
-abstract-declarator:
- pointer-opt direct-abstract-declarator
-
-direct-abstract-declarator:
- identifier-opt
- ( abstract-declarator )
- direct-abstract-declarator [ unary-expression ]
- direct-abstract-declarator [ ]
-
-pointer:
- * type-qualifier-list-opt
- * type-qualifier-list-opt pointer
-
-type-qualifier-list:
- type-qualifier
- type-qualifier-list type-qualifier
-
-typedef-name:
- identifier
-
-2.3) CTF-specific declarations
-
-ctf-specifier:
- clock { ctf-assignment-expression-list-opt }
- event { ctf-assignment-expression-list-opt }
- stream { ctf-assignment-expression-list-opt }
- env { ctf-assignment-expression-list-opt }
- trace { ctf-assignment-expression-list-opt }
- callsite { ctf-assignment-expression-list-opt }
- typealias declaration-specifiers abstract-declarator-list type-assignment-operator declaration-specifiers abstract-declarator-list
- typealias declaration-specifiers abstract-declarator-list type-assignment-operator declarator-list
-
-ctf-type-specifier:
- floating_point { ctf-assignment-expression-list-opt }
- integer { ctf-assignment-expression-list-opt }
- string { ctf-assignment-expression-list-opt }
- string
-
-ctf-assignment-expression-list:
- ctf-assignment-expression ;
- ctf-assignment-expression-list ctf-assignment-expression ;
-
-ctf-assignment-expression:
- unary-expression assignment-operator unary-expression
- unary-expression type-assignment-operator type-specifier
- declaration-specifiers-opt storage-class-specifier declaration-specifiers-opt declarator-list
- typealias declaration-specifiers abstract-declarator-list type-assignment-operator declaration-specifiers abstract-declarator-list
- typealias declaration-specifiers abstract-declarator-list type-assignment-operator declarator-list