libata: implement and use ops inheritance

[deliverable/linux.git] / drivers / ata / pata_radisys.c

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c54673e008d0a0d2f5e7c3f821ac260d162522d..94e60b3a1ec67ab627c9a4171944362654f36c46 100644 (file)
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *
  *     Called when the libata layer is about to issue a command. We wrap
  *     this interface so that we can load the correct ATA timings if
- *     neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ *     necessary. Our logic also clears TIME0/TIME1 for the other device so
  *     that, even if we get this wrong, cycles to the other device will
  *     be made PIO0.
  */
@@ -185,59 +185,15 @@ static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
 
 
 static struct scsi_host_template radisys_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
-#ifdef CONFIG_PM
-       .resume                 = ata_scsi_device_resume,
-       .suspend                = ata_scsi_device_suspend,
-#endif
+       ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations radisys_pata_ops = {
-       .port_disable           = ata_port_disable,
+static struct ata_port_operations radisys_pata_ops = {
+       .inherits               = &ata_bmdma_port_ops,
+       .qc_issue               = radisys_qc_issue_prot,
+       .cable_detect           = ata_cable_unknown,
        .set_piomode            = radisys_set_piomode,
        .set_dmamode            = radisys_set_dmamode,
-       .mode_filter            = ata_pci_default_filter,
-
-       .tf_load                = ata_tf_load,
-       .tf_read                = ata_tf_read,
-       .check_status           = ata_check_status,
-       .exec_command           = ata_exec_command,
-       .dev_select             = ata_std_dev_select,
-
-       .freeze                 = ata_bmdma_freeze,
-       .thaw                   = ata_bmdma_thaw,
-       .error_handler          = ata_bmdma_error_handler,
-       .post_internal_cmd      = ata_bmdma_post_internal_cmd,
-       .cable_detect           = ata_cable_unknown,
-
-       .bmdma_setup            = ata_bmdma_setup,
-       .bmdma_start            = ata_bmdma_start,
-       .bmdma_stop             = ata_bmdma_stop,
-       .bmdma_status           = ata_bmdma_status,
-       .qc_prep                = ata_qc_prep,
-       .qc_issue               = radisys_qc_issue_prot,
-       .data_xfer              = ata_data_xfer,
-
-       .irq_handler            = ata_interrupt,
-       .irq_clear              = ata_bmdma_irq_clear,
-       .irq_on                 = ata_irq_on,
-       .irq_ack                = ata_irq_ack,
-
-       .port_start             = ata_port_start,
 };
 
 
@@ -259,21 +215,21 @@ static const struct ata_port_operations radisys_pata_ops = {
 static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        static int printed_version;
-       static struct ata_port_info info = {
+       static const struct ata_port_info info = {
                .sht            = &radisys_sht,
-               .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags          = ATA_FLAG_SLAVE_POSS,
                .pio_mask       = 0x1f, /* pio0-4 */
                .mwdma_mask     = 0x07, /* mwdma1-2 */
                .udma_mask      = 0x14, /* UDMA33/66 only */
                .port_ops       = &radisys_pata_ops,
        };
-       static struct ata_port_info *port_info[2] = { &info, &info };
+       const struct ata_port_info *ppi[] = { &info, NULL };
 
        if (!printed_version++)
                dev_printk(KERN_DEBUG, &pdev->dev,
                           "version " DRV_VERSION "\n");
 
-       return ata_pci_init_one(pdev, port_info, 2);
+       return ata_pci_init_one(pdev, ppi);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {